Dosimetric Validation of a GAN-Based Pseudo-CT Generation for MRI-Only Stereotactic Brain Radiotherapy

PURPOSE

Stereotactic radiotherapy (SRT) has become widely accepted as a treatment of choice for patients with a small number of brain metastases that are of an acceptable size, allowing for better target dose conformity, resulting in high local control rates and better sparing of organs at risk. An MRI-only workflow could reduce the risk of misalignment between magnetic resonance imaging (MRI) brain studies and computed tomography (CT) scanning for SRT planning, while shortening delays in planning. Given the absence of a calibrated electronic density in MRI, we aimed to assess the equivalence of synthetic CTs generated by a generative adversarial network (GAN) for planning in the brain SRT setting.

METHODS

All patients with available MRIs and treated with intra-cranial SRT for brain metastases from 2014 to 2018 in our institution were included. After co-registration between the diagnostic MRI and the planning CT, a synthetic CT was generated using a 2D-GAN (2D U-Net). Using the initial treatment plan (Pinnacle v9.10, Philips Healthcare), dosimetric comparison was performed using main dose-volume histogram (DVH) endpoints in respect to ICRU 91 guidelines (Dmax, Dmean, D2%, D50%, D98%) as well as local and global gamma analysis with 1%/1 mm, 2%/1 mm and 2%/2 mm criteria and a 10% threshold to the maximum dose. t-test analysis was used for comparison between the two cohorts (initial and synthetic dose maps).

RESULTS

184 patients were included, with 290 treated brain metastases. The mean number of treated lesions per patient was 1 (range 1-6) and the median planning target volume (PTV) was 6.44 cc (range 0.12-45.41). Local and global gamma passing rates (2%/2 mm) were 99.1 CI95% (98.1-99.4) and 99.7 CI95% (99.6-99.7) respectively (CI: confidence interval). DVHs were comparable, with no significant statistical differences regarding ICRU 91's endpoints.

CONCLUSIONS

Our study is the first to compare GAN-generated CT scans from diagnostic brain MRIs with initial CT scans for the planning of brain stereotactic radiotherapy. We found high similarity between the planning CT and the synthetic CT for both the organs at risk and the target volumes. Prospective validation is under investigation at our institution.

Design and Kinematics of a Comanipulated Robot Dedicated to Prostate Brachytherapy

In brachytherapy, the manual implantation of seeds is not accurate leading to side effects and limiting the use of new procedures. Robotics solutions have to be fully suitable for medical applications especially considering the operating room. This paper investigates a delta robot solution for improving the accuracy of the prostate brachytherapy procedure by proposing a compact and lightweight robot. In addition, the design was thought as a comanipulated robot for a better acceptability and human–machine interaction. The robot kinematics and singularities were determined and the theoretical capability in term of resolution and force feedback was evaluated. A prototype was built in order to experimentally measure the capability of this first prototype.

Scatter Correction Based on GPU-Accelerated Full Monte Carlo Simulation for Brain PET/MRI

Accurate scatter correction is essential for qualitative and quantitative PET imaging. Until now, scatter correction based on Monte Carlo simulation (MCS) has been recognized as the most accurate method of scatter correction for PET. However, the major disadvantage of MCS is its long computational time, which makes it unfeasible for clinical usage. Meanwhile, single scatter simulation (SSS) is the most widely used method for scatter correction. Nevertheless, SSS has the disadvantage of limited robustness for dynamic measurements and for the measurement of large objects. In this work, a newly developed implementation of MCS using graphics processing unit (GPU) acceleration is employed, allowing full MCS-based scatter correction in clinical 3D brain PET imaging. Starting from the generation of annihilation photons to their detection in the simulated PET scanner, all relevant physical interactions and transport phenomena of the photons were simulated on GPUs. This resulted in an expected distribution of scattered events, which was subsequently used to correct the measured emission data. The accuracy of the approach was validated with simulations using GATE (Geant4 Application for Tomography Emission), and its performance was compared to SSS. The comparison of the computation time between a GPU and a single-threaded CPU showed an acceleration factor of 776 for a voxelized brain phantom study. The speedup of the MCS implemented on the GPU represents a major step toward the application of the more accurate MCS-based scatter correction for PET imaging in clinical routine.

Improved Woodcock tracking on Monte Carlo simulations for medical applications

This paper presents a new variance reduction technique called super voxel Woodcock (SVW), which combines Woodcock tracking technique with the super voxel concept, used in computer graphics. It consists in grouping the voxels of the volume in a super voxel grid (pre-processing step) by associating to each of the super voxels a local value of the most attenuate medium which will later serve to the interaction distances sampling. SVW allows reducing the sampling of the particle path while a high-density material is present within the simulated phantom. In order to evaluate the performance of the SVW method compare to both standard and Woodcock tracking methods, algorithms were implemented within the same GPU MCS framework GGEMS. This method improves the performance of the standard Woodcock method by a factor of 4.5 and 4.3 for x-ray imaging application and intraoperative radiotherapy respectively. The proposed SVW method did not introduce any bias on the simulations.