Space allowance during commercial long distance transport of cattle in North America

The objective of the present work was to study space allowance in cattle during commercial long haul transport (≥400 km; n = 6,152 journeys). Surveys, delivered to livestock transport carriers, gathered information on the number, BW, and distribution of cattle by trailer compartment as well as the characteristics of the transport vehicles used. Space allowance (SA; m(2)/animal), allometric coefficient (k = SA / BW(0.6667)), and the percentage of deviation from recommended SA (DRSA; %) in the Canadian Codes of Practice were calculated for each compartment of the trailers. All quad-axle (77%) and tri-axle (23%) cattle trailers were reported with 5 compartments (nose, deck, belly, back, and doghouse). Sixty percent of all animals were carried in the middle compartments (deck and belly), 30% in the rear (back and doghouse), and 10% in the front or nose. Approximately 30% of the journeys required that the cattle be redistributed at the Canada-USA border to comply with different axle weight regulations, and most journeys moved them between the deck and the doghouse. Total loaded weight increased and the number of animals decreased with increasing BW of the animals. space allowance, k-value, and DRSA were least for calves and feeders compared with fat and cull cattle (p < 0.01). Both total loaded weight and number of animals increased with the number of axles in the trailer, being greatest in quad-axle trailers pulled by push tractors, which were most frequently used. Space allowance (k-value) was least in vehicles with greater number of axles and transporting the lightest cattle (i.e., quad-axles trailers transporting calves and feeders). Space allowance, k-value, and variability among journeys were least in the middle compartments (belly and deck), followed by the back, then doghouse and nose compartments of the trailers showing the largest values (p < 0.05). Many factors contributed to the variability in SA such as body size (smaller animals are placed more densely), compartment of the trailer (greater density in belly and deck), and number of axles on the vehicle (greater density with more axles). The present study provides a framework to assess and understand factors affecting SA during commercial long distance transport of cattle. This information is vital in assessing the consequences of changing industry standards, guidelines, recommended values, laws and regulations on animal welfare, the industry, and economics.

Factors affecting body weight loss during commercial long haul transport of cattle in North America

The objective of the present study was to identify and quantify several factors affecting shrink in cattle during commercial long-haul transport (≥400 km; n = 6,152 journeys). Surveys were designed and delivered to transport carriers to collect relevant information regarding the characteristics of animals, time of loading, origin and destination, and loaded weight before and after transport. In contrast to fat cattle, feeder cattle exhibited greater shrink (4.9 vs. 7.9 ± 0.2% of BW, respectively; P < 0.01), and experienced longer total transport durations (12.4 vs. 14.9 ± 0.99, respectively; P < 0.01) due to border crossing protocols which require mandatory animal inspection. Shrink was greater (P < 0.001) for feeder cattle loaded at ranches/farms and feed yards compared with those loaded at auction markets. Cattle loaded during the afternoon and evening shrank more than those loaded during the night and morning (P < 0.05). Shrinkage was less in cattle transported by truck drivers having 6 or more years of experience hauling livestock compared with those with 5 yr or less (P < 0.05). Shrink increased with both midpoint ambient temperature (% of BW/°C; P < 0.001) and time on truck (% of BW/h; P < 0.001). Temperature and time on truck had a multiplicative effect on each other because shrink increased most rapidly in cattle transported for both longer durations and at higher ambient temperatures (P < 0.001). The rate of shrink over time (% of BW/h) was greatest in cull cattle, intermediate in calves and feeder cattle, and slowest in fat cattle (P < 0.05) but such differences disappeared when the effects of place of origin, loading time, and experience of truck drivers were included in the model. Cull cattle, calves and feeder cattle appear to be more affected by transport compared with fat cattle going to slaughter because of greater shrink. Several factors should be considered when developing guidelines to reduce cattle transport stress and shrink including type of cattle, ambient temperature, transport duration, driving quality, and time and origin of loading.

Thermoluminescence study of polyminerals extracted from clove and marjoram for detection purposes

Food irradiation is a widely employed technology for food treatment. Since in several countries no regulations prevail, it is difficult to detect whether food has been irradiated or not. Among different analytical methods the study of the thermoluminescent (TL) emission of polymineral extracted from food is one of the most useful physical identification method. The aim of this work is to analyze the TL properties of inorganic polyminerals extracted from commercial clove (Syzygium aromaticum L.) and marjoram (Origanum majorana L.) spices exposed to (60)Co gamma radiation for detection purposes. The feasibility of using the TL method for irradiated food detection and absorbed dose determination is assessed.

Effect of virus infection on the stability and synthesis of actinomycin-resistant ribonucleic acid in baby-hamster kidney cells

1. The sucrose-gradient pattern of (32)P-labelled RNA synthesized in actinomycintreated baby-hamster kidney cells infected with foot-and-mouth-disease virus depends greatly on the period of labelling. 2. Fractions are formed in infected cells that sediment at 12-20s and have the same base composition as similar fractions found in non-infected cells that have been treated with actinomycin. 3. In the presence of guanidine, which completely inhibits viral RNA synthesis, these fractions are labelled to a greater extent than in non-infected cells.

Synthesis of ribonucleic acid in baby-hamster kidney cells in the presence of actinomycin D

1. RNA molecules with sedimentation values in sucrose gradients of 12-20s are synthesized in baby-hamster kidney cells even after prolonged incubation in medium containing 1mug. of actinomycin D/ml. 2. The rate of formation of this RNA is dependent on the age of the cultures and is greatest during the exponential phase of growth. 3. Growth of cells on nutritionally poor medium causes degradation and inhibits the synthesis of these RNA fractions. 4. Replacement of the nutritionally poor medium with a rich medium stimulates the synthesis of actinomycin-resistant RNA. This stimulation is blocked by cycloheximide. 5. The base composition of this RNA is characterized by low cytidine and high guanosine values.

The potential of retro-inverso peptides as synthetic vaccines

Retro-inverso peptides, also known as all-D-retro or retro-enantio peptides, are composed of D-amino acids assembled in the reverse order from that of the parent L-sequence. Since the orientation of the side-chains in a retro-inverso analogue is very similar to that in the parent L-peptide, this leads to a high level of antigenic cross-reactivity between the two peptides. The potential of retro-inverso peptides as synthetic vaccines has been investigated in the case of foot-and-mouth disease. A single inoculation of retro-inverso peptide corresponding to residues 141-159 of the VP1 protein of foot-and-mouth disease virus induced longer-lasting and higher antibody titres in immunised animals than the corresponding L-peptides. The antibodies cross-reacted strongly with virus particles and with L-peptides and conferred substantial protection in guinea-pigs challenged with the cognate virus. Retro-inverso peptides have considerable potential as synthetic vaccines, since their increased resistance to proteases may overcome one of the major drawbacks of classical L-peptide vaccines.

Congenital anomaly rate in offspring of mothers with diabetes treated with insulin lispro during pregnancy

AIM

To determine the rate of major congenital anomalies in offspring of a large group of women with diabetes mellitus treated with insulin lispro (Humalog).

METHODS

This multinational, multicentre, retrospective study included mothers with diabetes mellitus (diagnosed prior to conception) who were treated with insulin lispro for at least 1 month before conception and during at least the first trimester of pregnancy. Anomalies were assessed by two independent dysmorphologists not affiliated with the sponsor.

RESULTS

The charts of 496 women were reviewed for 533 pregnancies resulting in 542 offspring (500 live births, 31 spontaneous and seven elective abortions, and four stillbirths). Mothers' characteristics: mean (+/- SD) age was 29.9 (+/- 5.2) years, 85.6% were Caucasian and 97.2% had Type 1 diabetes mellitus. Insulin lispro continued to be the main mealtime insulin for more than 96% of the women during the second and third trimester. The dysmorphologists determined that 27 (5.4%) offspring had major congenital anomalies and 2 (0.4%) offspring had minor congenital anomalies.

CONCLUSIONS

The rate of major congenital anomalies was 5.4% [95% CI (3.45%, 7.44%)] for offspring of mothers with diabetes mellitus treated with insulin lispro before and during pregnancy. The current published rates of major anomalies in infants born to mothers with diabetes treated with insulin are between 2.1 and 10.9%. This suggests that the anomaly rate with insulin lispro treatment does not differ from the published major congenital anomaly rates for other insulin treatments.

Automated variance reduction for MCNP using deterministic methods

In order to reduce the user's time and the computer time needed to solve deep penetration problems, an automated variance reduction capability has been developed for the MCNP Monte Carlo transport code. This new variance reduction capability developed for MCNP5 employs the PARTISN multigroup discrete ordinates code to generate mesh-based weight windows. The technique of using deterministic methods to generate importance maps has been widely used to increase the efficiency of deep penetration Monte Carlo calculations. The application of this method in MCNP uses the existing mesh-based weight window feature to translate the MCNP geometry into geometry suitable for PARTISN. The adjoint flux, which is calculated with PARTISN, is used to generate mesh-based weight windows for MCNP. Additionally, the MCNP source energy spectrum can be biased based on the adjoint energy spectrum at the source location. This method can also use angle-dependent weight windows.

Intranasal immunization of guinea pigs with an immunodominant foot-and-mouth disease virus peptide conjugate induces mucosal and humoral antibodies and protection against challenge

Guinea pigs immunized intranasally with a keyhole limpet hemocyanin-linked peptide, corresponding to the prominent G-H loop of the VP1 protein of foot-and-mouth disease virus, raised substantial levels of antipeptide and virus-neutralizing antibodies in sera and of peptide-specific secretory immunoglobulin A in nasal secretions. In groups of animals immunized intranasally without adjuvant, 86 percent were fully protected upon challenge with homotypic virus. Surprisingly, animals given the peptide conjugates plus the mucosal adjuvant cholera toxin were afforded only partial protection in that primary lesions were observed in most animals, although spread to other feet was prevented. These results indicate that intranasal inoculation with the peptide offers a potential route of vaccination against foot-and-mouth disease and may be useful for eliciting protection in the upper respiratory tracts of susceptible animals.

Broad-spectrum virus reduction in red cell concentrates using INACTINE PEN110 chemistry

BACKGROUND AND OBJECTIVES

The risk of transmission of blood-borne pathogens by transfusion is a persistent problem in medicine. To address this safety issue, INACTINE PEN110 chemistry is being utilized to develop a process for preparing pathogen-reduced red blood cell concentrates (RBCC). The purpose of this study was to characterize the virucidal effectiveness of the INACTINE PEN110 chemistry in full units of RBCC by using a panel of viruses with diverse properties in composition, size and shape.

MATERIALS AND METHODS

The panel included four enveloped (bovine viral diarrhoea virus, pseudorabies virus, vesicular stomatitis Indiana virus and sindbis virus), six non-enveloped (porcine parvovirus, human adenovirus 2, reovirus 3, vesicular exanthema of swine virus, bluetongue virus, and foot and mouth disease virus) and cell-associated (human immunodeficiency) viruses. All viruses were individually spiked into CPD/AS-1, CP2D/AS-3 and CPD/AS-5 RBCC units and treated with 0.1% PEN110 (vol/vol) at 22 +/- 2 degrees C for up to 22 +/- 2 h. The PEN110 treatment reaction was stopped by chemical quenching, and residual virus was assayed. The cytotoxicity effect of PEN110-treated RBCC on indicator cells and the potential interference with the ability of the virus to infect indicator cells was determined and taken into consideration for calculating the virus-reduction factors, to avoid underestimation or overestimation of the virus reduction.

RESULTS

The kinetics of inactivation for viruses spiked into CPD/AS-1, CP2D/AS-3 and CPD/AS-5 RBCC were equivalent. All viruses analysed in this study were reduced to the limit of detection of the assay. The reduction factors for the virus panel ranged from 4.2 to 7.5 log10/ml.

CONCLUSIONS

The results from the study demonstrate for the first time that a pathogen-reduction technology for RBCC can achieve a broad-spectrum virucidal effect against both enveloped and non-enveloped viruses. The broad spectrum of virucidal activity of INACTINE PEN110, and equivalent kinetics of virus inactivation in RBCC prepared using different commercially available RBC storage solutions, demonstrate the robustness of this pathogen-reduction process.