Measurement of the B(+) production cross section in pp collisions at sqrt[s]=7 TeV

Measurements of the total and differential cross sections dσ/dp(T)(B) and dσ/dy(B) for B(+) mesons produced in pp collisions at sqrt[s]=7  TeV are presented. The data correspond to an integrated luminosity of 5.8  pb(-1) collected by the CMS experiment operating at the LHC. The exclusive decay B(+)→J/ψK(+), with J/ψ→μ(+)μ(-), is used to detect B(+) mesons and to measure the production cross section as a function of p(T)(B) and y(B). The total cross section for p(T)(B)>5  GeV and |y(B)|<2.4 is measured to be 28.1±2.4±2.0±3.1  μb, where the first uncertainty is statistical, the second is systematic, and the last is from the luminosity measurement.

Effects of Merogel coverage on wound healing and ostial patency in endonasal endoscopic dacryocystorhinostomy for primary chronic dacryocystitis

PURPOSE

To investigate the effects of Merogel coverage on ostial patency in endonasal endoscopic dacryocystorhinostomy (EES-DCR) for primary chronic dacryocystitis (PCD).

METHODS

In all, 260 patients with unilateral PCD were randomized into two groups: the Merogel group and the control group. All patients underwent EES-DCR. The Merogel group received Merogel covering the wound 1-2 mm around the ostium and the control group received no treatment. Patients were followed up for 9 months. The mucosal epithelialization of the wound, the proliferation of fibrosis tissue, and the success rate of ostial patency were compared.

RESULTS

Our study included 112 patients in the Merogel group and 115 patients in the control group. At the 2-week review, intact mucosal epithelium lined the ostia in 96 Merogel patients compared with 80 control patients (ITT analysis: χ(2)=4.502, P=0.034). At the 9-month review, scars were present in 18 patients in the Merogel group compared with 39 patients in the control group (ITT analysis: χ(2)=9.909, P=0.002, ITT analysis). No differences were observed in the granulation formation between the two groups. The success rate of ostial patency reached 94.6% (106/112) in the Merogel group compared with 80% (92/115) in the control group (ITT analysis: χ(2)=4.151, P=0.042).

CONCLUSION

Merogel coverage may enhance the success rate of EES-DCR for PCD by promoting mucosal epithelial healing and preventing excessive scarring.

Measurement of the isolated prompt photon production cross section in pp collisions at √s=7 TeV

The differential cross section for the inclusive production of isolated prompt photons has been measured as a function of the photon transverse energy E(T)(γ) in pp collisions at √s=7  TeV using data recorded by the CMS detector at the LHC. The data sample corresponds to an integrated luminosity of 2.9  pb(-1). Photons are required to have a pseudorapidity |η(γ)|<1.45 and E(T)(γ)>21  GeV, covering the kinematic region 0.006<x(T)<0.086. The measured cross section is found to be in agreement with next-to-leading-order perturbative QCD calculations.

Confirmation of the X(1835) and observation of the resonances X(2120) and X(2370) in J/ψ→γπ+π-η'

With a sample of (225.2±2.8)×10(6) J/ψ events registered in the BESIII detector, J/ψ→γπ(+)π(-)η(') is studied using two η(') decay modes: η(')→π(+)π(-)η and η(')→γρ(0). The X(1835), which was previously observed by BESII, is confirmed with a statistical significance that is larger than 20σ. In addition, in the π(+)π(-)η(') invariant-mass spectrum, the X(2120) and the X(2370), are observed with statistical significances larger than 7.2σ and 6.4σ, respectively. For the X(1835), the angular distribution of the radiative photon is consistent with expectations for a pseudoscalar.

3D visualization of subcellular structures of Schizosaccharomyces pombe by hard X-ray tomography

Cellular structures of the fission yeast, Schizosaccharomyces pombe, were examined by using hard X-ray tomography. Since cells are nearly transparent to hard X-rays, Zernike phase contrast and heavy metal staining were introduced to improve image contrast. Through using such methods, images taken at 8 keV displayed sufficient contrast for observing cellular structures. The cell wall, the intracellular organelles and the entire structural organization of the whole cells were visualized in three-dimensional at a resolution better than 100 nm. Comparison between phase contrast and absorption contrast was also made, indicating the obvious advantage of phase contrast for cellular imaging at this energy. Our results demonstrate that hard X-ray tomography with Zernike phase contrast is suitable for cellular imaging. Its unique abilities make it have potential to become a useful tool for revealing structural information from cells, especially thick eukaryotic cells.

Doping of GaN by Ion Implantation: Does it Work?

Epitaxially grown GaN by metal organic chemical vapor deposition (MOCVD) on SiC were implanted with 100 keV Si+ (for n-type) and 80 keV Mg+ (for p-type) with various fluences from 1×1012 to 7×1015 ions/cm2 at liquid nitrogen temperature (LT), room temperature (RT), and 700 °C (HT). High temperature (1200 °C and 1500 °C) annealing was carried out after capping the GaN with epitaxial AIN by MOCVD to study damage recovery. Samples were capped by a layer of AIN in order to protect the GaN surface during annealing. Effects of implant temperature, damage and dopant activation are critically studied to evaluate a role of ion implantation in doping of GaN. The damage was studied by Rutherford Backscattering/Channeling, spectroscopic ellipsometry and photoluminescence. Results show dependence of radiation damage level on temperature of the substrate during implantation: implantations at elevated temperatures up to 550 °C decrease the lattice disorder; “hot implants” above 550 °C can not be useful in doping of GaN due to nitrogen loss from the surface. SE measurements have indicated very high sensitivity to the implantation damage. PL measurements at LT of 80 keV Mg+ (5×1014 cm-2) implanted and annealed GaN showed two peaks : one ∼100 meV and another ∼140 meV away from the band edge.

The Control of Mineralization on Natural and Implant Surfaces

The generation of minerals such as calcium phosphates on the surfaces of dental and joint replacement implants is beneficial since the facilitation of bone formation permits their fixation. In contrast, the prevention of crystallization is desired on other surfaces such as kidney and cardiac valve prostheses. A key to the development of successful biomaterials is therefore an understanding of the factors that control crystal nucleation, growth and dissolution in aqueous solution. The Constant Composition method was used to investigate the influence of factors such as solution composition, ionic strength, pH and temperature on the crystallization and dissolution of the calcium phosphates, brushite (DCPD), octacalcium phosphate (OCP), hydroxyapatite (HAP) and fluorapatite (FAP). In parallel with these studies, a contact angle method along with surface tension component theory was employed to investigate the roles of interfacial free energy in mineralization and demineralization. Values of the interfacial tensions, -4.2, 4.3, 10.4 and 18.5 mJm-2 obtained from contact angle measurements for DCPD, OCP, HAP and FAP, respectively, compare well with those calculated from dissolution kinetics experiments and provide information concerning the growth and dissolution mechanisms. The exploitation of these approaches is illustrated in studies of the coating of specific calcium phosphate phases on titanium metal and alloy surfaces and nucleation and growth of OCP on polymer surfaces modified by silanization to produce amine- and carboxylterminated end groups. In all these reactions involving the calcium phosphates, concomitant dissolution reactions are often involved. Constant Composition kinetic studies have shown that the rate of these reactions decrease markedly with time despite a sustained driving force, and eventually, the rates approach zero even though crystals remain in the undersaturated solutions. Dissolution can be reinitiated by exposing the crystals to the solutions of different undersaturations. These results suggest that dislocation sizes play a significant role in the dissolution kinetic processes.

Anaphase-promoting complex/cyclosome controls HEC1 stability

OBJECTIVE

Chromosome segregation during mitosis requires a physically large proteinaceous structure called the kinetochore to generate attachments between chromosomal DNA and spindle microtubules. It is essential for kinetochore components to be carefully regulated to guarantee successful cell division. Depletion, mutation or dysregulation of kinetochore proteins results in mitotic arrest and/or cell death. HEC1 (high expression in cancer) has been reported to be a kinetochore protein, depletion of which, by RNA interference, results in catastrophic mitotic exit.

MATERIALS AND METHODS AND RESULTS

To investigate how HEC1 protein is controlled post-translation, we analysed the role of anaphase-promoting complex/cyclosome (APC/C)-Cdh1 in degradation of HEC1 protein. In this study, we show that HEC1 is an unstable protein and can be targeted by endogenous ubiquitin-proteasome system in HEK293T cells. Results of RNA interference and in vivo ubiquitination assay indicated that HEC1 could be ubiquitinated and degraded by APC/C-hCdh1 E3 ligase. The evolutionally conserved D-box at the C-terminus functioned as the degron of HEC1, destruction of which resulted in resistance to degradation mediated by APC/C-Cdh1. Overexpression of non-degradable HEC1 (D-box destroyed) induced accumulation of cyclin B protein in vivo and triggered mitotic arrest.

CONCLUSION

APC/C-Cdh1 controls stability of HEC1, ensuring normal cell cycle progression.

Search for stopped Gluinos in pp collisions at square root s=7 TeV

The results of the first search for long-lived gluinos produced in 7 TeV pp collisions at the CERN Large Hadron Collider are presented. The search looks for evidence of long-lived particles that stop in the CMS detector and decay in the quiescent periods between beam crossings. In a dataset with a peak instantaneous luminosity of 1×10(32) cm-2 s-1, an integrated luminosity of 10 pb-1, and a search interval corresponding to 62 hours of LHC operation, no significant excess above background was observed. Limits at the 95% confidence level on gluino pair production over 13 orders of magnitude of gluino lifetime are set. For a mass difference mg - mχ1(0) >100 GeV/c2, and assuming BR(g→gχ1(0))=100%, mg < 370 GeV/c2 are excluded for lifetimes from 10 μs to 1000 s.

Search for quark compositeness with the dijet centrality ratio in pp collisions at √s=7 TeV

A search for quark compositeness in the form of quark contact interactions, based on hadronic jet pairs (dijets) produced in proton-proton collisions at √s=7 TeV, is described. The data sample of the study corresponds to an integrated luminosity of 2.9 pb(-1) collected with the CMS detector at the LHC. The dijet centrality ratio, which quantifies the angular distribution of the dijets, is measured as a function of the invariant mass of the dijet system and is found to agree with the predictions of the standard model. A statistical analysis of the data provides a lower limit on the energy scale of quark contact interactions. The sensitivity of the analysis is such that the expected limit is 2.9 TeV; because the observed value of the centrality ratio at high invariant mass is below the expectation, the observed limit is 4.0 TeV at the 95% confidence level.

Evidence for ψ' decays into γπ0 and γη

The decays ψ'→γπ(0), γη and γη' are studied using data collected with the BESIII detector at the BEPCII e(+)e(-) collider. The processes ψ'→γπ(0) and ψ'→γη are observed for the first time with signal significances of 4.6σ and 4.3σ, respectively. The branching fractions are determined to be B(ψ'→γπ(0))=(1.58±0.40±0.13)×10(-6), B(ψ'→γη)=(1.38±0.48±0.09)×10(-6), and B(ψ'→γη')=(126±3±8)×10(-6), where the first errors are statistical and the second ones systematic.

Examination of AKAP12 promoter methylation in skin cancer using methylation-sensitive high-resolution melting analysis

BACKGROUND

A kinase anchor protein 12 (AKAP12/gravin) belongs to a family of scaffold proteins and organizes protein kinase (PK)A and PKC. DNA hypermethylation in the AKAP12 promoter region has been reported in a variety of human cancers with the exception of skin cancer. Methylation-specific high-resolution melting (MS-HRM) analysis is a novel tool for analysis of promoter methylation.

AIM

To use MS-HRM analysis to detect the methylation levels of the AKAP12 gene in skin samples.

METHODS

In total, 195 samples, including basal cell carcinoma, squamous cell carcinoma and actinic keratosis were examined. MS-HRM analysis was used to detect methylation levels of the AKAP12 gene in these samples.

RESULTS

MS-HRM analysis successfully detected the methylation of AKAP12 in skin samples. The frequencies of AKAP12 methylation in all three types of skin abnormalities were significantly higher than in normal tissues.

CONCLUSIONS

Application of MS-HRM analysis proved to be a fast and high-throughput method to investigate the epigenetic status of AKAP12. Methylation of AKAP12 can be detected in different skin abnormalities.

Search for dijet resonances in 7 TeV pp collisions at CMS

A search for narrow resonances in the dijet mass spectrum is performed using data corresponding to an integrated luminosity of 2.9 pb⁻¹ collected by the CMS experiment at the Large Hadron Collider. Upper limits at the 95% confidence level are presented on the product of the resonance cross section, branching fraction into dijets, and acceptance, separately for decays into quark-quark, quark-gluon, or gluon-gluon pairs. The data exclude new particles predicted in the following models at the 95% confidence level: string resonances, with mass less than 2.50 TeV, excited quarks, with mass less than 1.58 TeV, and axigluons, colorons, and E6 diquarks, in specific mass intervals. This extends previously published limits on these models.

Molecular characterization, expression patterns and polymorphism analysis of porcine Six1 gene

Six1 belongs to the Six gene family that includes six members in mammals (from Six1 to Six6). It has been demonstrated that Six1 homeodomain transcription factor is implicated in myogenesis. However, the molecular characteristics of Six1 in pigs have not been reported. In this study, we isolated and characterized the porcine Six1 gene full-length cDNA, genomic DNA and proximal promoter sequence. Semi-quantitative RT-PCR results confirmed that porcine Six1 was highly expressed in skeletal muscle. Real-time quantitative PCR results showed that porcine Six1 was highly expressed in embryonic stage and no significant expression differences is observed between Meishan and Yorkshire pigs. Furthermore, Six1 expression was significantly different among different developmental stages in Yorkshire pigs and the expression trend was up-regulated from 3 days to 180 days, reaching its highest expression level at 180 days. In addition, the data of Six1 expression in different muscles demonstrated that Six1 was a fast-twitch muscle high expression gene. PCR-HindII-RFLP was established to detect a C/T mutation and an A/G mutation which were present in promoter and intron, respectively. Meanwhile, their associations with economic traits were assessed in Meishan × Yorkshire F2 reference family. The statistical results revealed that the two HindII polymorphisms of porcine Six1 had significant associations with several meat quality traits (P<0.05). Taken together, these studies suggest that porcine Six1 may play an important role in skeletal muscle growth and meat quality.

Antibacterial silver-containing silica glass prepared by ion implantation

Recently, there is much interest in nanocomposites consisting of metal nanoparticles dispersed in dielectric matrix. Silver is the first candidate used in antibacterial research. In the present study, sliver-containing silica glass is prepared by ion implantation. The bactericidal properties of Ag-implanted samples are investigated using E. coli. The implanted samples are characterized by optical absorption spectroscopy, atomic force microscopy and transmission electron microscopy. The size and position of the silver nanoparticles formed by ion implantation can be optimized by adjusting the implanted process parameters. All the implanted samples show antibacterial properties. But the samples with silver nanoparticle-enriched surfaces possess excellent antibacterial properties in comparison with other implanted samples. This indicates that ion implantation is a potential method for synthesizing antibacterial biomaterials.