51
|
Parthasarathy P, Fernandez A, Al-Ansari T, Mackey HR, Rodriguez R, McKay G. Thermal degradation characteristics and gasification kinetics of camel manure using thermogravimetric analysis. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2021; 287:112345. [PMID: 33735671 DOI: 10.1016/j.jece.2021.106071] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/13/2020] [Revised: 01/17/2021] [Accepted: 03/05/2021] [Indexed: 05/26/2023]
Abstract
In this work, the sustainable valorisation of camel manure has been studied using thermogravimetric analysis. The gasification tests were performed from ambient conditions to 950 °C at 10, 20, and 50 °C/min under an O2 environment. The TGA data were applied to determine the kinetics of the O2 gasification. Single-heating rate models (Arrhenius and Coats-Redfern) and multi-heating rate models (Distributed activation energy, Friedman, Flynn-Wall-Ozawa, Starink, and Kissinger-Akahira-Sunose) were applied to estimate the kinetics of the process. Between the two single-heating rate models, the Coats-Redfern method fitted best with the experimental data. Among the multi-heating rate models, the Flynn-Wall-Ozawa model fitted best with the experimental results. The kinetic parameters-frequency factor, activation energy, and order of reaction were estimated using the Flynn-Wall-Ozawa model (the best-fitting model) and the estimated kinetic parameters were used to calculate the thermodynamic properties-Gibbs free energy, enthalpy, and entropy. The information on these kinetic and thermodynamic properties can be useful for the design of gasifiers and for optimising the O2 gasification operating conditions.
Collapse
|
52
|
Guizani C, Trogen M, Zahra H, Pitkänen L, Moriam K, Rissanen M, Mäkelä M, Sixta H, Hummel M. Fast and quantitative compositional analysis of hybrid cellulose-based regenerated fibers using thermogravimetric analysis and chemometrics. CELLULOSE (LONDON, ENGLAND) 2021; 28:6797-6812. [PMID: 34720464 PMCID: PMC8550718 DOI: 10.1007/s10570-021-03923-6] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/03/2020] [Accepted: 05/06/2021] [Indexed: 06/13/2023]
Abstract
UNLABELLED Cellulose can be dissolved with another biopolymer in a protic ionic liquid and spun into a bicomponent hybrid cellulose fiber using the Ioncell® technology. Inside the hybrid fibers, the biopolymers are mixed at the nanoscale, and the second biopolymer provides the produced hybrid fiber new functional properties that can be fine-tuned by controlling its share in the fiber. In the present work, we present a fast and quantitative thermoanalytical method for the compositional analysis of man-made hybrid cellulose fibers by using thermogravimetric analysis (TGA) in combination with chemometrics. First, we incorporated 0-46 wt.% of lignin or chitosan in the hybrid fibers. Then, we analyzed their thermal decomposition behavior in a TGA device following a simple, one-hour thermal treatment protocol. With an analogy to spectroscopy, we show that the derivative thermogram can be used as a predictor in a multivariate regression model for determining the share of lignin or chitosan in the cellulose hybrid fibers. The method generated cross validation errors in the range 1.5-2.1 wt.% for lignin and chitosan. In addition, we discuss how the multivariate regression outperforms more common modeling methods such as those based on thermogram deconvolution or on linear superposition of reference thermograms. Moreover, we highlight the versatility of this thermoanalytical method-which could be applied to a wide range of composite materials, provided that their components can be thermally resolved-and illustrate it with an additional example on the measurement of polyester content in cellulose and polyester fiber blends. The method could predict the polyester content in the cellulose-polyester fiber blends with a cross validation error of 1.94 wt.% in the range of 0-100 wt.%. Finally, we give a list of recommendations on good experimental and modeling practices for the readers who want to extend the application of this thermoanalytical method to other composite materials. SUPPLEMENTARY INFORMATION The online version contains supplementary material available at 10.1007/s10570-021-03923-6.
Collapse
|
53
|
Yin C, Deng X, Yu Z, Liu Z, Zhong H, Chen R, Cai G, Zheng Q, Liu X, Zhong J, Ma P, He W, Lin K, Li Q, Wu A. Auto-classification of biomass through characterization of their pyrolysis behaviors using thermogravimetric analysis with support vector machine algorithm: case study for tobacco. BIOTECHNOLOGY FOR BIOFUELS 2021; 14:106. [PMID: 33906681 PMCID: PMC8077845 DOI: 10.1186/s13068-021-01942-w] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/18/2020] [Accepted: 03/27/2021] [Indexed: 06/12/2023]
Abstract
BACKGROUND During the biomass-to-bio-oil conversion process, many studies focus on studying the association between biomass and bio-products using near-infrared spectra (NIR) and chemical analysis methods. However, the characterization of biomass pyrolysis behaviors using thermogravimetric analysis (TGA) with support vector machine (SVM) algorithm has not been reported. In this study, tobacco was chosen as the object for biomass, because the cigarette smoke (including water, tar, and gases) released by tobacco pyrolysis reactions decides the sensory quality, which is similar to biomass as a renewable resource through the pyrolysis process. RESULTS SVM algorithm has been employed to automatically classify the planting area and growing position of tobacco leaves using thermogravimetric analysis data as the information source for the first time. Eighty-eight single-grade tobacco samples belonging to four grades and eight categories were split into the training, validation, and blind testing sets. Our model showed excellent performances in both the training and validation set as well as in the blind test, with accuracy over 91.67%. Throughout the whole dataset of 88 samples, our model not only provides precise results on the planting area of tobacco leave, but also accurately distinguishes the major grades among the upper, lower, and middle positions. The error only occurs in the classification of subgrades of the middle position. CONCLUSIONS From the case study of tobacco, our results validated the feasibility of using TGA with SVM algorithm as an objective and fast method for auto-classification of tobacco planting area and growing position. In view of the high similarity between tobacco and other biomasses in the compositions and pyrolysis behaviors, this new protocol, which couples the TGA data with SVM algorithm, can potentially be extrapolated to the auto-classification of other biomass types.
Collapse
|
54
|
Mphahlele K, Matjie RH, Osifo PO. Thermodynamics, kinetics and thermal decomposition characteristics of sewage sludge during slow pyrolysis. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2021; 284:112006. [PMID: 33535126 DOI: 10.1016/j.jenvman.2021.112006] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/21/2020] [Revised: 12/29/2020] [Accepted: 01/14/2021] [Indexed: 06/12/2023]
Abstract
Pyrolysis has shown great potential for sewage sludge valorisation and management by producing value-added chemicals. Although the product process yields are extensively studied, a few studies exist without consensus on the kinetic properties of sewage sludge pyrolysis. As a result, a study to investigate the thermal decomposition characteristics of Gauteng sewage sludge (GSS) at various heating rates (10, 20, and 30 °C/min), its pyrolysis kinetic parameters, reaction mechanism and thermodynamic properties was meticulously conducted. The results show that sewage sludge decomposition occurs in three stages, whereby the main decomposition (active pyrolysis) takes place at 150-570 °C. Fourier transform infrared spectroscopy (FTIR) analysis results confirm progression of thermal decomposition of GSS and drive off volatile compounds and formation of aromatic structures during TGA studies of GSS. An increase in heating rate shifts the characteristic temperatures towards higher temperatures with the highest decomposition rate of 1.10%/min.mg at 30 °C/min. The activation energies of GSS pyrolysis were calculated using Flynn-Wall-Ozawa, Kissinger-Akahira-Sunose and Starink methods and averaged as 225.92, 218.04 and 218.97 kJ/mol, respectively. GSS pyrolysis involves complex reaction chemistry with high reactivity whereby reactions that follow third order and three-dimensional diffusion-reaction mechanisms dominated the process. However, these mechanisms cannot be used explicitly to define the global pyrolysis kinetics due to the occurrence of multiple simultaneous reactions. The obtained thermodynamic and kinetic data will advance and amplify the design, simulation and optimisation of global energy pyrolysis units for production of value-added chemicals.
Collapse
|
55
|
Wen S, Zou H, Liu J, Evrendilek DE, Yan Y, Liang G. Multi-response optimization toward efficient and clean (co-)combustions of textile dyeing sludge and second-generation feedstock. JOURNAL OF HAZARDOUS MATERIALS 2021; 408:124824. [PMID: 33373950 DOI: 10.1016/j.jhazmat.2020.124824] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/21/2020] [Revised: 12/07/2020] [Accepted: 12/08/2020] [Indexed: 06/12/2023]
Abstract
The rapid growth of textile dyeing sludge (TDS) necessitates feeding it back into a circular economy in an efficient and clean way. This study aimed to optimize the clean and efficient operational conditions to co-combust TDS and incense sticks (IS). The (co-)-combustions exhibited four distinctive stages of thermal degradation. According to the master-plots method, the reaction mechanisms of reaction order (F2.4 and F1.5), three-dimensional diffusion (D3), and nucleation growth (A1.5) best explained the four stages, respectively. The interaction between TDS and IS exerted an inhibition effect in the range of 400-500 °C and a facilitation effect in the range of 600-1000 °C. At 300 °C as the main reaction temperature, the main evolved gas and functional groups such as CO2, H2O, CH4, C˭O, C-O, and C-H were detected. The addition of IS improved the comprehensive combustion index, inhibited SO2, but enhanced CO2, HCN, and NOx emissions. CaO in IS enabled Fe to remain in TDS and fixed more S in ash. Multi-response optimizations based on the best-fit artificial neural networks revealed the range of 545-605 °C and the co-combustion of 25% TDS and 75% IS as the cleaner and more efficient operational conditions.
Collapse
|
56
|
González-Arias J, Carnicero A, Sánchez ME, Martínez EJ, López R, Cara-Jiménez J. Management of off-specification compost by using co-hydrothermal carbonization with olive tree pruning. Assessing energy potential of hydrochar. WASTE MANAGEMENT (NEW YORK, N.Y.) 2021; 124:224-234. [PMID: 33631447 DOI: 10.1016/j.wasman.2021.01.026] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/01/2020] [Revised: 12/31/2020] [Accepted: 01/19/2021] [Indexed: 06/12/2023]
Abstract
In this work the management of a waste called off-specification compost (OSC) was proposed via hydrothermal carbonization (HTC). The composition of this residue makes it not suitable for agronomic purposes because of the Spanish regulation requirements. Therefore, a way of management and/or valorisation needs to be found. The energy recovery through co-HTC with olive tree pruning (OTP) was evaluated. Blending of OSC with lignocellulosic biomass allows to obtain a coal-like product with physicochemical properties similar to those of a lignite, characterised by its high carbon content. Blends of 25, 50 and 75% of OSC with OTP were analysed. The individual OSC does not present good parameters for being used as solid fuel based on its chemical composition, however, the blend of 75% of biomass with 25% of OSC does. With a higher heating value of 26.19 MJ/kg, this blend shows the best energy yield and energy densification ratio. Thermogravimetric and kinetic analysis reveal that as biomass content in the blend increases, the more the hydrochar behaves as a solid fuel, therefore OSC can be used for energy purposes while its current use of landfill disposal can be reduced.
Collapse
|
57
|
Development of emulsion gelatin gels for food application: Physicochemical, rheological, structural and thermal characterization. Int J Biol Macromol 2021; 182:1-10. [PMID: 33775767 DOI: 10.1016/j.ijbiomac.2021.03.141] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/07/2020] [Revised: 03/18/2021] [Accepted: 03/22/2021] [Indexed: 12/11/2022]
Abstract
The current work aimed to prepare emulsion gels based on European eel skin gelatin (ESG). The results revealed that the ESG exhibited interesting antioxidant and functional properties in a dose-dependent manner. The ESG has a gel strength of 354.86 g and high gelling and melting temperatures of about 33 and 43 °C, respectively. Hence, based on its interesting gelling ability, the ESG-based gel was employed to stabilize European eel oil (EO) emulsions. In this context, two emulsions were prepared by homogenization or homogenization followed by sonication at EO:ESG weight ratios of 1:2 and 1:4. The physicochemical, textural, structural and thermal properties of emulsion gelatin-based gels (EGGs) were evaluated. The EGGs had a rigid and a cohesive gel network, according to the textural and microstructural analysis. Structural and thermogravimetric analyses showed the effective entrapment of EO in the ESG gel network.
Collapse
|
58
|
Sengottuvelu D, Athianna M, Siddeswaran A. High temperature stable conjugated polyazomethines containing naphthalene moiety: Synthesis, characterization, optical, electrical and thermal properties. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2021; 246:118989. [PMID: 33035889 DOI: 10.1016/j.saa.2020.118989] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/19/2019] [Revised: 09/11/2020] [Accepted: 09/21/2020] [Indexed: 06/11/2023]
Abstract
A series of azomethine diol monomers containing naphthalene moiety were synthesized and oxidatively polymerized in aqueous alkaline medium using NaOCl as oxidant. The structure of the monomers and polymers was characterized by using various spectroscopic techniques. PL spectra of polymers are exhibiting good emission with high Stokes shift values than the monomers due to their polyconjugated structure. The electrical conductivity of polymers was measured by a two-point probe technique, and it increases with an increase in iodine vapour contact time up to 144 h. The electrical conductivity values were correlated with the charge density on azomethine nitrogen obtained from the Hückel calculation method. The dielectric properties of polymers were studied at different temperatures in the frequency range from 50 Hz to 5 MHz. The synthesized polyazomethines have recorded high thermal stability and are shown by carbon residue of around 50% at 800 °C in the thermogravimetric analysis.
Collapse
|
59
|
Liu H, Zhang S, Feng S, Jia C, Guo S, Sun B, Wang Q. Combustion characteristics and typical pollutant emissions of corn stalk blending with municipal sewage sludge. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2021; 28:9792-9805. [PMID: 33156504 DOI: 10.1007/s11356-020-11463-y] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/19/2020] [Accepted: 10/28/2020] [Indexed: 06/11/2023]
Abstract
The co-combustion of sewage sludge and biomass is a key problem in coal-fired power plants. The combustion characteristics and pollutant emissions of municipal sewage sludge and biomass could result in unpredictable operation and environmental problems. In this study, the combustion experiments of corn stalk (CS), municipal sewage sludge (SS), and their blends were conducted in the thermogravimetric analyzer and muffle furnace, focusing on the combustion characteristics and the pollutants (SO2/NO) emissions with different temperature, proportion, and heating rate. It was found that the combustion characteristics of the mixture are affected by the mix ratio of SS. Compared with those of SS, the SO2 emission amount and S-SO2 conversion rate of CS are lower. The content of N in SS is higher than CS, but the conversion rate of N-NO is lower. Although the emissions of SO2 and NO from CS blending with SS are higher than those from CS combustion alone, the conversion rate of SO2 and NO decreases. This means that the co-combustion of CS and SS will reduce the content of pollutants released by CS combustion alone and effectively solve the environmental problems associated with CS incineration.
Collapse
|
60
|
Lopalco A, Iacobazzi RM, Denora N, Stella VJ. Bortezomib Aqueous Solubility in the Presence and Absence of D-Mannitol: A Clarification With Formulation Implications. J Pharm Sci 2020; 110:543-547. [PMID: 33058895 DOI: 10.1016/j.xphs.2020.10.012] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/30/2020] [Revised: 09/17/2020] [Accepted: 10/08/2020] [Indexed: 11/25/2022]
Abstract
The solubility of bortezomib, a boronic acid, in water and normal saline is often misquoted in the literature. Here we confirm that bortezomib equilibrium solubility in water and normal saline is 0.59 ± 0.07 and 0.52 ± 0.11 mg/mL, respectively. The aqueous solubility is significantly enhanced, 1.92 ± 0.14 and 3.40 ± 0.21 mg/mL, respectively, in the presence of 55 mM and 137 mM D-mannitol in normal saline, as in the commercial formulation, Velcade®, after reconstitution. This is due to reversible ester formation between bortezomib and D-mannitol. Based on the pH-solubility profile curve for bortezomib in the absence of added D-mannitol, bortezomib's pKa value is estimated to be 8.8 ± 0.2. Boric acid, glycine and a combination of the two, used in an alternative formulation to that of Velcade® do not enhance the equilibrium aqueous solubility of bortezomib.
Collapse
|
61
|
Ramos-Bell S, Calderón-Santoyo M, Barros-Castillo JC, Ragazzo-Sánchez JA. Characterization of submicron emulsion processed by ultrasound homogenization to protect a bioactive extract from sea grape ( Coccoloba uvifera L.). Food Sci Biotechnol 2020; 29:1365-1372. [PMID: 32999743 DOI: 10.1007/s10068-020-00780-0] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/03/2019] [Revised: 05/01/2020] [Accepted: 05/19/2020] [Indexed: 01/07/2023] Open
Abstract
In this study, the stability of a submicron emulsion to protect an extract obtained from sea grape fruit (Coccoloba uvifera L.) was evaluated. Extract characterization by MS-HPLC revealed the presence of 3 anthocyanins (cyanidin 3-glucoside, malvidin 3-glucoside, and delphinidin 3-glucoside), the content of total phenols was 263.86 ± 1.86 mg gallic acid equivalent/100 g, with an antioxidant capacity determined by ABTS and DPPH of 128.95 ± 1.00 and 26.18 ± 0.60 μg Trolox equivalents/mL, respectively. A submicron emulsion (0.424 μm) by Ultrasound with monomodal distribution, stable over time and low viscosity (1.94 mPa s) classified as a shear-thinning fluid was obtained. The thermogravimetric analysis (TGA) demonstrated the stability of the C. uvifera extract in the emulsion, which is thermostable (212 °C). These emulsions can be added into a beverage as a nutraceutical, dried for later use as pills or incorporated in foods.
Collapse
|
62
|
Bodart L, Derlet A, Buol X, Leyssens T, Tumanov N, Wouters J. Combining Two Antitubercular Drugs, Clofazimine and 4-Aminosalicylic Acid, in Order to Improve Clofazimine Aqueous Solubility and 4-Aminosalicylic Acid Thermal Stability. J Pharm Sci 2020; 109:3645-3652. [PMID: 32976899 DOI: 10.1016/j.xphs.2020.09.024] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/22/2020] [Revised: 08/28/2020] [Accepted: 09/17/2020] [Indexed: 10/23/2022]
Abstract
Four forms of a salt combining two antitubercular drugs, clofazimine and 4-aminosalicylic acid, are reported and the crystal structure of two of these forms are described. TG/DSC analysis of all four forms demonstrate an increase in the temperature at which degradation (upon decarboxylation) occurs in comparison to pure 4-aminosalicylic acid. Water solubility evaluation indicates a significant increase of the amount of clofazimine detected in water (10.26 ± 0.52 μg/mL for form I, 12.27 ± 0.32 μg/mL for form II, 7.15 ± 0.43 μg/mL for form III and 8.50 ± 1.24 μg/mL for form IV) in comparison to pure clofazimine (0.20 ± 0.03 μg/mL).
Collapse
|
63
|
Xu X, Woźniczka M, Van Hecke K, Buyst D, Mara D, Vervaet C, Herman K, Wynendaele E, Deconinck E, De Spiegeleer B. Structural study of L-ascorbic acid 2-phosphate magnesium, a raw material in cell and tissue therapy. J Biol Inorg Chem 2020; 25:875-885. [PMID: 32719971 DOI: 10.1007/s00775-020-01801-3] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/02/2019] [Accepted: 06/29/2020] [Indexed: 02/02/2023]
Abstract
L-ascorbic acid 2-phosphate magnesium (APMg) salt is a vitamin C derivative frequently used as a raw material in cell and tissue therapy. APMg is not only used as a replacement of the unstable ascorbate, but also shows additional cell-biological functionalities. However, its unknown structural characteristics hamper the mechanistic elucidation of its biological role. Therefore, different techniques were applied for APMg structure characterization. Firstly, the stoichiometric composition was characterized by its solvent, ligand and magnesium content. No crystals of APMg could be obtained; however, a single crystal of APNa, the sodium salt of l-ascorbic acid 2-phosphate, was successfully obtained and its crystal structure was elucidated. FT-IR was applied to further clarify the structure of solid APMg. Finally, the structure of APMg in aqueous solution was explored by potentiometric titration as well as FT-IR.
Collapse
|
64
|
Marican A, Forero-Doria O, Polo E, Gallego J, Durán-Lara EF. Data of preparation and evaluation of supramolecular hydrogel based on cellulose for sustained release of therapeutic substances with antimicrobial and wound healing properties. Data Brief 2020; 31:105902. [PMID: 32637503 PMCID: PMC7330148 DOI: 10.1016/j.dib.2020.105902] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/09/2020] [Revised: 06/04/2020] [Accepted: 06/15/2020] [Indexed: 11/13/2022] Open
Abstract
The data article refers to the paper “supramolecular hydrogel based on cellulose for sustained release of therapeutic substances with antimicrobial and wound healing properties”[1]. The dataset includes the synthesis and characterization of (E)-1,3-bis(4-(allyloxy)phenyl)prop‑2-en-1-one (3) (crosslinking agent). Moreover, the multiwall carbon nanotubes (MWCNTs) synthesis and functionalization (MWCNTs-COOH) are described. The formulation obtained by adding multiwalled carbon nanotubes-COOH with the crosslinked cellulose-chalcone hydrogel is abbreviated as MWCNTsCCH, and the same formulation loaded with therapeutic substances (TS) is named MWCNTsCCH-TS. The MWCNTsCCH database such as components and their amounts, swelling degree, thermogravimetric analysis, and cytotoxicity evaluation are depicted. Finally, to elucidate the mechanism of therapeutic substances release, the obtained averages of the release profiles were fitted through mathematical models.
Collapse
|
65
|
Yan X, Hu J, Zhang Q, Zhao S, Dang J, Wang W. Chemical-looping gasification of corn straw with Fe-based oxygen carrier: Thermogravimetric analysis. BIORESOURCE TECHNOLOGY 2020; 303:122904. [PMID: 32028220 DOI: 10.1016/j.biortech.2020.122904] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/12/2019] [Revised: 01/23/2020] [Accepted: 01/24/2020] [Indexed: 06/10/2023]
Abstract
The chemical-looping gasification kinetics of corn straw with iron-based oxygen carrier to produce syngas were studied using thermogravimetric analysis. The main reactions of corn straw based on iron-based composite oxygen carrier is divided into three stages: the pyrolysis stage (200-500 °C), the gas-solid reaction stage (500-700 °C), and the solid-solid reaction stage (700-1100 °C). The Coats-Redfern method and the Malek method were used to screen the thirty reactions. The activation energies for the most likely main reactions were estimated to be 81.6 kJ/mol (Mample single-line rule), 117.5 kJ/mol (reaction order function), and 140.9 kJ/mol (Ginstling-Brounshtein equation). The chemical-looping gasification of corn straw with Fe-based oxygen carrier involved multi-step reaction mechanisms.
Collapse
|
66
|
Patnaik S, Kumar S, Panda AK. Thermal degradation of eco-friendly alternative plastics: kinetics and thermodynamics analysis. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2020; 27:14991-15000. [PMID: 32065367 DOI: 10.1007/s11356-020-07919-w] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/21/2019] [Accepted: 01/28/2020] [Indexed: 06/10/2023]
Abstract
This work reports the thermal degradation behaviour, kinetics and thermodynamics of two different eco-friendly plastics, viz. non-woven plastic and corn starch-based biodegradable plastics, which are commonly used nowadays as an alternative to synthetic plastics. In this context, thermogravimetric analysis of plastic waste samples was carried out at wide range of heating rates of 10, 20, 40, 60, 80 and 100 °C/min in nitrogen atmosphere, and activation energy is determined by first-order model-fitting method while thermodynamic parameters are determined on the basis of Eyring theory of activated complex. The regression coefficient obtained from kinetic study of thermal degradation of these plastics best fits to the first-order kinetic equation. The kinetics and thermodynamic parameters obtained for both the plastics are found very close to each other. So, this study would help design more effective conversion system for the recycling of both the wastes together.
Collapse
|
67
|
Silva JDOD, Santos DEL, Abud AKDS, Oliveira AMD. Characterization of acerola (Malpighia emarginata) industrial waste as raw material for thermochemical processes. WASTE MANAGEMENT (NEW YORK, N.Y.) 2020; 107:143-149. [PMID: 32283488 DOI: 10.1016/j.wasman.2020.03.037] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/06/2019] [Revised: 03/24/2020] [Accepted: 03/28/2020] [Indexed: 06/11/2023]
Abstract
Brazil stands out as one of the largest world powers in the agribusiness sector, and with the increase of production capacity, an enormous amount of waste is generated that cause serious environmental problems. Acerola is evidenced as one of the fruits of growing and important commercialization, contributing significantly to regional development through the export of concentrated powder product. Thus, in order to minimize the environmental impacts generated by the local fruit processing industry, the proximate analysis of its residue after drying in a convective oven at temperatures of 50, 75 and 100 °C was carried out in this work, aiming at the reuse of this residue for thermochemical processes. Moisture, ash, volatile matter (VM), and fixed carbon (FC) content were analyzed, as well as characterizations, such as infrared spectroscopy (FTIR), elemental analysis (CHNO), calorific value (HHV) and thermogravimetry (TG/DTG). The results showed a significant difference in the moisture contents, VM, FC and elemental carbon for the dry residue at 50 °C compared to the temperatures of 75 and 100 °C, while for the ash content there was no significant difference between the temperatures. The dry acerola residue at the three temperatures studied presented adequate properties for thermochemical application, with lignocellulosic compounds that can be converted by thermochemical route, good levels of calorific power, low moisture and ash content, associated with high amount of volatile matter.
Collapse
|
68
|
Jia H, Liu B, Zhang X, Chen J, Ren W. Effects of ultrasonic treatment on the pyrolysis characteristics and kinetics of waste activated sludge. ENVIRONMENTAL RESEARCH 2020; 183:109250. [PMID: 32088608 DOI: 10.1016/j.envres.2020.109250] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/28/2019] [Revised: 01/17/2020] [Accepted: 02/11/2020] [Indexed: 06/10/2023]
Abstract
In this study, physicochemical analysis, thermogravimetric analysis, and kinetic analysis were used to investigate the effects of ultrasonic treatment on waste activated sludge (WAS), with emphasis on its kinetic parameters and pyrolysis behaviors. Thermogravimetric analysis results indicated that the pyrolysis of ultrasonic WAS might be divided into three stages. The main pyrolysis behavior occurred in the second stage (180-540 °C), and its pyrolysis behavior and activation energy were similar to the thermal decomposition of lignocellulosic biomass. Moreover, the physicochemical analysis indicated that ultrasonic treatment reduced the content of lignocellulose and ash, thus changing the pyrolysis characteristics of WAS. Ultrasonic WAS exhibited a higher residual weight (54.93 wt%), a larger average activation energy (140.09 kJ/mol), a lower maximum weight loss rate (-5.71%/min), and a change in the weight loss peak to a higher temperature (304.7 °C), reflecting the decrease of the pyrolysis reaction rate. In addition, the kinetic parameters were calculated using the Starink method and Coats-Redfern method.
Collapse
|
69
|
Tang F, Yu Z, Li Y, Chen L, Ma X. Catalytic co-pyrolysis behaviors, product characteristics and kinetics of rural solid waste and chlorella vulgaris. BIORESOURCE TECHNOLOGY 2020; 299:122636. [PMID: 31881438 DOI: 10.1016/j.biortech.2019.122636] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/29/2019] [Revised: 12/13/2019] [Accepted: 12/14/2019] [Indexed: 06/10/2023]
Abstract
Catalytic and non-catalytic co-pyrolysis behaviors, kinetics and products distribution of rural solid waste (RSW) and chlorella vulgaris (CV) were studied by thermogravimetric analysis (TGA) and fixed bed reactor. TGA results showed that co-pyrolysis of RSW and CV presented synergism by decreasing the temperature relating to the first mass loss peak. All the additives reduced residual mass for co-pyrolysis (5.21%, 1.57% and 4.89% for CaO, MgO and HZSM-5). Addition of CaO increased activation energy while HZSM-5 and MgO reduced it. Co-pyrolysis of RSW and CV remarkably reduced carboxylic acids and nitrogenous compounds especially for 1:1 ratio. (30.85% and 25.87%). Catalytic pyrolysis with CaO showed the best results by increasing aliphatic hydrocarbons especially light fraction (5.96%-11.98%), reducing acids (0%-30.85%) and nitrogenous compounds (0.08%-17.26%), causing higher HHV of oil. Overall, catalytic co-pyrolysis of CV and RSW with CaO could obtain bio-oil of higher quality.
Collapse
|
70
|
Isaac K, Bada SO. The co-combustion performance and reaction kinetics of refuse derived fuels with South African high ash coal. Heliyon 2020; 6:e03309. [PMID: 32021941 PMCID: PMC6994845 DOI: 10.1016/j.heliyon.2020.e03309] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2019] [Revised: 11/07/2019] [Accepted: 01/23/2020] [Indexed: 10/25/2022] Open
Abstract
This research focuses on the co-firing of low-quality coal with refuse derived fuel (RDF) as a means to reduce the volume of waste dumped in landfill sites. The co-combustion behaviour and kinetics of various RDF/coal blends at different weight ratios, along with their physicochemical characteristics were investigated. The physicochemical analysis revealed that the run-of-mine and discard coal have relatively low calorific values of 21.7 MJ/kg and 16.7 MJ/kg, respectively. The RDF samples, plastic blend (31.2 MJ/kg) and paper blend (22.4 MJ/kg), were found to have higher energy contents. The thermogravimetric analysis was performed in an atmosphere of air, over a temperature range of 25-850 °C, and the results showed that the RDF samples had lower ignition, devolatilisation, and burnout temperatures compared to the coals. The ignition temperatures for the blended fuel occurs in the lower temperature region when RDF is added to the blend, likewise the peak temperatures and burnout temperature shifted to a lower temperature zone. The activation energies (Ea) were determined using the Coats-Redfern method. The Ea for the run-of-mine (ROM) coal of 104.4 kJ/mol, was found to reduce to 31.4 kJ/mol for the 75% PB + 25% ROM coal blend and 35 kJ/mol for the 75% PL + 25% ROM coal blend, respectively. The discard coal which had an Ea of 109.9 kJ/mol was reduced to 30.9 kJ/mol for the 75% PB + 25% discard blend, and 33.5 kJ/mol for the 75% PL + 25% discard coal blend. It was determined that the most favourable blend for co-combustion was 70% discard coal + 30% PL RDF due to the similarity of the combustion profile to that of 100% coal and the simultaneous reduction in apparent activation energy.
Collapse
|
71
|
Nielsen RV, Jensen M, Christian Duus SA, Christensen ML. Critical moisture point of sludge and its link to vapour sorption and dewatering. CHEMOSPHERE 2019; 236:124299. [PMID: 31323551 DOI: 10.1016/j.chemosphere.2019.07.030] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/01/2019] [Revised: 06/07/2019] [Accepted: 07/04/2019] [Indexed: 06/10/2023]
Abstract
The mechanical dewatering of sludge is important in order to achieve a high dry matter content, thereby lowering the transportation cost and the energy consumption during incineration. Thermogravimetric analysis is sometimes used to estimate the maximum dry matter content obtainable from mechanical dewatering, by measuring the critical moisture point. In this paper, the critical moisture point of digested sludge was measured and compared with vapour sorption curves. The critical moisture point was determined for raw and conditioned sludge to be 3.4 kg of water per kg of dry matter, corresponding to 23% w/w dry matter. This value was lower than the dry matter content obtained from the mechanical dewatering process, indicating that the dry matter content can exceed the critical moisture point. Moisture vapour sorption was measured for raw, conditioned, and dewatered sludges. The Blahovec and Yanniotis sorption isotherm fitted the experimental data well. Between 10 and 12 g of water was adsorbed as a monolayer per 100 g of dry matter. The rest of the moisture content was explained by the non-ideal Raoult's law, by including the effect of dissolved ions. At water activities above 0.95, the moisture content was determined by capillary condensation and cake compressibility. The water activity was higher than 0.95 at the critical moisture point and the capillary pressure was estimated to be 4-6 bars. This pressure was responsible for cake compression during drying, while the relatively low dry matter content at the critical moisture point may be due to the low capillary pressure.
Collapse
|
72
|
Khiari B, Massoudi M, Jeguirim M. Tunisian tomato waste pyrolysis: thermogravimetry analysis and kinetic study. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2019; 26:35435-35444. [PMID: 30989599 DOI: 10.1007/s11356-019-04675-4] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/02/2019] [Accepted: 02/21/2019] [Indexed: 06/09/2023]
Abstract
This paper aims to set up viable units of thermal processing of numerous agricultural wastes in a sustainable development and eco-friendly approach that could create new economic profitable circuits in an increasingly competitive context. One of the most problematic food wastes are tomato processing by-products; concentrating and canning industrial activities generate important amounts of them, particularly in the Tunisian context. As no reference was found in literature dealing with these last residues, this work intended to explore their potential as biomass fuels. Pyrolysis is then applied in thermogravimetric conditions for different heating rates (5, 10, 20, and 30 °C/min) in order to recover energy on one hand and to extract the corresponding kinetic parameters for an accurate design of reactors on the other hand. Main results include suitability of the tomato residues to a thermal valorization thanks to high contents of volatiles and fixed carbon and low ash percentage as well as an interesting heating value comparable to lignocellulosic biomass. Mass loss profiles indicate consecutive and overlapping stages of drying, active pyrolysis, and passive pyrolysis. The experimental profiles of conversion rate were well fitted by the three isoconversional methods; the best fitting is recorded by the Flynn-Wall-Ozawa associated with a first-order model for the intermediate pyrolysis and with a contracted sphere (n = 1/3) for the slowest studied pyrolysis.
Collapse
|
73
|
Vakalis S, Moustakas K, Benedetti V, Cordioli E, Patuzzi F, Loizidou M, Baratieri M. The "COFFEE BIN" concept: centralized collection and torrefaction of spent coffee grounds. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2019; 26:35473-35481. [PMID: 31065982 DOI: 10.1007/s11356-019-04919-3] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/19/2018] [Accepted: 03/19/2019] [Indexed: 06/09/2023]
Abstract
Spent coffee grounds are the moist solid residues of coffee brewing and in most cases, the disposal is done without any intermediate valorization actions for materials and energy recovery. State-of-the-art applications include extraction of the liquids and application of high-temperature pyrolysis. Both strategies have significant potential but have also some disadvantages (extensive pre-treatment, high costs) when applied on a large scale. This study highlights the lack of mild pyrolysis valorization strategies and presents the idea of the "COFFEE BIN." Separated spent coffee grounds are collected, dried, and thermally treated. The optimal pyrolysis conditions were identified and product characteristics and the mass balances were assessed. Elemental analysis, thermogravimetric analysis, physisorption analysis and higher heating value (HHV) determination was performed for the characterization of the carbonaceous products. The torrefied coffee grounds returned solid yields from 78 to 83%, which are significantly higher than in other cases of conventional biomass and heating values of 24-25 MJ/kg. Higher temperature pyrolysis did not sustain the advantage of increased returned mass yields and the adsorbance potential of all the carbonaceous products was lower than 25 cm3/g. The study highlighted that spent coffee grounds-due to the nature of their production process via roasting-can be suitable for torrefaction because of the high recovered solid yield and the high energy density. The results will be used for the development of a collection scheme for spent coffee grounds in a big municipality of Athens (Greece).
Collapse
|
74
|
Grekov D, Montavon G, Robinet JC, Grambow B. Smectite fraction assessment in complex natural clay rocks from interlayer water content determined by thermogravimetric and thermoporometry analysis. J Colloid Interface Sci 2019; 555:157-165. [PMID: 31377641 DOI: 10.1016/j.jcis.2019.07.076] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/20/2019] [Revised: 07/25/2019] [Accepted: 07/25/2019] [Indexed: 10/26/2022]
Abstract
The smectite content is a key parameter to be determined for various applications of clays and clay-rich rocks. The quantity of interlayer water characteristic of swelling domains can be used to assess the smectite content in clays. We propose in this study to use a simple approach to determine water distribution in clays (mainly between pores and interlayers) by means of thermoporometry and thermogravimetric analysis. Provided the interlayer water does not freeze at low temperature upon thermoporometry experiments, the difference between water quantities determined by the two techniques is assigned to interlayer water. Single-phase model clays and complex natural clay rocks and their composites in water-saturated state are characterized by this approach. The open question is the application of available thermoporometry models developed for simple pore geometry to characterize the complex pore network of clays. Depending on the approach used, different pore sizes were obtained highlighting the limit of a simplified model to describe the complex porous network. The results are more coherent when quantifying the amount of interlayer water, further used for smectite content estimation. Good agreement was obtained between smectite fraction contents deduced from the results of thermal analysis and those measured by conventional mineralogical techniques.
Collapse
|
75
|
Teng SY, Loy ACM, Leong WD, How BS, Chin BLF, Máša V. Catalytic thermal degradation of Chlorella vulgaris: Evolving deep neural networks for optimization. BIORESOURCE TECHNOLOGY 2019; 292:121971. [PMID: 31445240 DOI: 10.1016/j.biortech.2019.121971] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/29/2019] [Revised: 08/06/2019] [Accepted: 08/07/2019] [Indexed: 06/10/2023]
Abstract
The aim of this study is to identify the optimum thermal conversion of Chlorella vulgaris with neuro-evolutionary approach. A Progressive Depth Swarm-Evolution (PDSE) neuro-evolutionary approach is proposed to model the Thermogravimetric analysis (TGA) data of catalytic thermal degradation of Chlorella vulgaris. Results showed that the proposed method can generate predictions which are more accurate compared to other conventional approaches (>90% lower in Root Mean Square Error (RMSE) and Mean Bias Error (MBE)). In addition, Simulated Annealing is proposed to determine the optimal operating conditions for microalgae conversion from multiple trained ANN. The predicted optimum conditions were reaction temperature of 900.0 °C, heating rate of 5.0 °C/min with the presence of HZSM-5 zeolite catalyst to obtain 88.3% of Chlorella vulgaris conversion.
Collapse
|