Cranial Bone Regeneration Using a Composite Scaffold of Beta-Tricalcium Phosphate, Collagen, and Autologous Bone Fragments

OBJECTIVE

The aim of our study was to examine the tissue response and new bone formation induced by beta-tricalcium phosphate (beta-TCP), collagen, and autologous bone fragments with fibrin glue implanted into a cranial bone defect.

MATERIALS AND METHODS

Granulated beta-TCP and collagen from porcine skin were mixed and freeze-dried. The weight ratio of both materials was 98:2. The composite scaffold for bone regeneration was composed of this artificial material and autologous bone fragments. Five adult beagle dogs were used. A cranial bone defect (2 cmx2 cm) was created in each dog. The animals were divided into two groups. In group 1 (n=3), the cranial bone defect was closed by replacing the original free bone flap, and the residual fissure and burr holes were filled with the composite scaffold with fibrin glue. In group 2 (n=2), the bone defect was closed only by replacing the original free bone flap. Three months after the treatment, computed tomography and histologic examinations were done in all animals.

RESULTS

In all dogs in group 1, the defects were almost closed by new bone; whereas in group 2, the defects were filled with fibrous tissues instead of bone.

CONCLUSION

This study showed that the composite scaffold made of beta-TCP, collagen, and autologous bone fragments with fibrin glue enabled reconstruction of cranial bone defects without the usual fixation materials.

A comparative histologic analysis of tissue-engineered bone using platelet-rich plasma and platelet-enriched fibrin glue

OBJECTIVE

The aim of this study was to compare the effects of platelet-rich plasma (PRP) and platelet-enriched fibrin glue on bone formation in bone tissue engineering.

STUDY DESIGN

PRP was mixed with bone marrow mesenchymal stem cells and bone morphogenetic protein-2 (BMP-2), and the composites were injected into the subcutaneous space on the dorsum of nude mice. On the contralateral side of the dorsum, platelet-enriched fibrin glue/bone marrow mesenchymal stem cells/BMP-2 composites were injected. Bone formation was evaluated after 12 weeks.

RESULTS

The volumes of subcutaneous nodules formed in nude mice were 55 +/- 18 microL at the PRP/bone marrow mesenchymal stem cells/BMP-2 sites and 135 +/- 27 microL at the platelet-enriched fibrin glue/bone marrow mesenchymal stem cells/BMP-2 sites. Histomorphometric analysis demonstrated that the nodules contained 14.9 +/- 4.1% newly formed bone when using PRP and 19.8 +/- 3.6% newly formed bone when using platelet-enriched fibrin glue.

CONCLUSION

The results indicated that the osteogenic characteristics of platelet-enriched fibrin glue are superior to PRP in bone tissue engineering.

Platelet-rich fibrin (PRF): a second-generation platelet concentrate. Part I: technological concepts and evolution

Platelet-rich fibrin (PRF) belongs to a new generation of platelet concentrates geared to simplified preparation without biochemical blood handling. In this initial article, we describe the conceptual and technical evolution from fibrin glues to platelet concentrates. This retrospective analysis is necessary for the understanding of fibrin technologies and the evaluation of the biochemical properties of 3 generations of surgical additives, respectively fibrin adhesives, concentrated platelet-rich plasma (cPRP) and PRF. Indeed, the 3-dimensional fibrin architecture is deeply dependent on artificial clinical polymerization processes, such as massive bovine thrombin addition. Currently, the slow polymerization during PRF preparation seems to generate a fibrin network very similar to the natural one. Such a network leads to a more efficient cell migration and proliferation and thus cicatrization.

Platelet-rich fibrin (PRF): a second-generation platelet concentrate. Part II: platelet-related biologic features

Platelet-rich fibrin (PRF) belongs to a new generation of platelet concentrates, with simplified processing and without biochemical blood handling. In this second article, we investigate the platelet-associated features of this biomaterial. During PRF processing by centrifugation, platelets are activated and their massive degranulation implies a very significant cytokine release. Concentrated platelet-rich plasma platelet cytokines have already been quantified in many technologic configurations. To carry out a comparative study, we therefore undertook to quantify PDGF-BB, TGFbeta-1, and IGF-I within PPP (platelet-poor plasma) supernatant and PRF clot exudate serum. These initial analyses revealed that slow fibrin polymerization during PRF processing leads to the intrinsic incorporation of platelet cytokines and glycanic chains in the fibrin meshes. This result would imply that PRF, unlike the other platelet concentrates, would be able to progressively release cytokines during fibrin matrix remodeling; such a mechanism might explain the clinically observed healing properties of PRF.

Histological assessment of titanium and polypropylene fiber mesh implantation with and without fibrin tissue glue

Polypropylene (PP) and titanium (Ti) meshes are well-known surgical implants that provoke a relative low foreign body reaction. Firm stabilization of the implant is important to prevent migration and subsequent failure of the operation. Fibrin tissue glues are commercially available adhesives and are widely accepted and applied in the medical field for hemorrhage, surgical bleeding, support of wound healing, wound and tissue gluing, sealing, and closure but also as antiadhesive agent in certain applications. The objective of this study was to evaluate the additional histological effect of fibrin glue application combined with two different types of meshes. Six pieces of mesh of each were subcutaneously implanted for 3, 6, and 12 weeks, with and without fibrin glue. After excision, processing, and staining, light microscopic analysis was performed on the sections, using subjective histological description and histomorphometry. Capsule quality, capsule thickness, interstitial quality, and total score were evaluated. To compare the samples with glue and without glue, analysis of variance (ANOVA) tests were carried out. No complications were observed. In general, the glue remnants remained visible at 3 and 6 weeks of implantation, accompanied by an inflammatory reaction and macrophage activity. At 12 weeks, all samples showed good tissue integration without evidence of glue. Evidently, the samples with glue demonstrated a prolonged inflammatory response and were surrounded by fibrous tissue capsules that were significantly thicker compared with the samples without glue (p < 0.05).

Fibrin gel improved the spatial uniformity and phenotype of human chondrocytes seeded on collagen scaffolds

A scaffold made of equine collagen type I based material has been assessed for its use in the preparation of tissue-engineered cartilage implants with human articular chondrocytes. Improvements of cell-seeding efficiency and specific gene expression were studied by combining solid scaffold with fibrin glue or human blood plasma. Following 3 weeks of static culture, mRNA expression levels of collagen type I, collagen type II, aggrecan and versican were analyzed by real-time quantitative PCR and compared to those in native cartilage and monolayer cell cultures. Constructs prepared with fibrin glue or plasma showed higher cell seeding efficiencies than those prepared without gel. Chondrocytes seeded directly onto a collagen scaffold appeared fibroblastic in shape while those encapsulated in fibrin gel were spherical. The presence of fibrin glue positively influences on mRNA levels of collagen type II and aggrecan, while blood plasma enhanced only the level of collagen type II expression. Levels of collagen type I and versican decreased in presence of fibrin glue. In orthopaedics, the combination of solid collagen fleece with fibrin gel for implant preparation is seen to be preferred over solid material or even cells in a suspension, since fibrin gel improves seeding capacity of the scaffold, supports equal distribution of cells and stimulates higher chondrogenic phenotype expression.

Fibrin sealant versus mechanical stapling for mesh fixation during endoscopic extraperitoneal inguinal hernioplasty: a randomized prospective trial

OBJECTIVE

To compare the clinical outcome of simultaneous bilateral endoscopic totally extraperitoneal inguinal hernioplasty (TEP) using fibrin sealant (FS) and mechanical stapling for prosthetic mesh fixation.

SUMMARY BACKGROUND DATA

Similar efficacy of FS and mechanical stapling for mesh fixation has been demonstrated in a swine model, but no clinical trial has been conducted to compare the outcomes of TEP using these 2 fixation devices. FS adheres the prosthetic mesh without causing injury to the underlying structures. Whether the application of FS improves early postoperative outcomes, namely, reduction of postoperative pain and seroma formation, has not been examined.

PATIENTS AND METHODS

Between July 2002 and February 2004, a total of 93 patients with 186 inguinal hernias who underwent bilateral TEP were randomized to have mesh fixation by either FS (n = 46) or mechanical stapling (n = 47). The primary endpoints were severity of pain, analgesic requirement, and incidence of seroma. Secondary endpoints were length of hospital stay, number of days required to resume normal outdoor activities and work, recurrence rate, and incidence of chronic pain.

RESULTS

The 2 groups were comparable in age, sex, and types of hernia. TEP were successfully performed in all patients. The FS group consumed significantly less analgesics compared with that of the staple group (P = 0.034). There was no significant difference in the postoperative pain score at rest and on coughing from the day of operation to postoperative day 6 between the groups. The incidence of seroma was significantly higher in the FS group (17.4%) than the staple group (5.3%) (P = 0.009). Length of hospital stay and time taken to resume normal activities and work were comparable between the 2 groups. With a median follow-up of 1.2 years, no recurrent hernia has been detected in either group, but the incidence of chronic pain in the staple group (20.0%) was higher than that of the FS group (13.2%) (P = 0.418).

CONCLUSIONS

This randomized prospective clinical trial demonstrated a significant reduction of analgesic consumption by using FS for mesh fixation during bilateral TEP, but it was associated with an increased incidence of postoperative seroma.

Wound healing and degradation of the fibrin sealant Beriplast P following partial liver resection in rabbits

The objective of this study was to investigate the degradation kinetics of the fibrin sealant (FS) Beriplast P in an experimental liver surgery model in rabbits. A partial liver resection was performed in 21 rabbits, and the wound area covered with Beriplast P to ensure hemostasis. Wound healing of the resection sites was evaluated morphologically over 11 weeks. Degradation of the FS was evaluated by measuring the thickness of the remaining fibrin layer. Plasma samples were analyzed for antibodies against fibrinogen, albumin, thrombin, fibrin, and factor XIII. No postoperative hemorrhage was observed, indicating successful hemostasis throughout. The FS was degraded with a half-life of about 25 days postapplication and was completely replaced by granulation tissue within 9 weeks. The FS degradation and tissue development followed the general stages of wound healing: inflammation and resorption, proliferation, organization and production of collagen, maturation, and scarring. An immune reaction was elicited against the main four human proteins of the FS. The antibody titers peaked on day 14, with a gradual decrease thereafter. We conclude that the FS accomplished hemostasis, facilitated healing in accordance with natural processes, and was completely degraded over time. In humans, the reduced immunogenicity of the FS would potentially increase its degradation half-life.

Migration pattern, morphology and viability of cells suspended in or sealed with fibrin glue: a histomorphologic study

INTRODUCTION

We studied the migration pattern, morphology and viability of cells suspended in five different fibrin glues. Besides this, the behaviour of chondrocytes seeded on porous matrices comprising different collagen types sealed with fibrin glue was investigated.

MATERIAL AND METHODS

In an experiment A, cell suspension (0.5x10(6) cells) was incubated with different fibrin glues. Experiment B was set up to evaluate chondrocytes migration either through a collagen I/III (Chondro-Gide, Geistlich Biomaterials, Switzerland) or collagen II matrix sealed with different fibrin glues in a perfusion chamber system. Analysis were performed by lightmicroscopy (Mayer's hematoxylin-eosin; Masson-Goldner; TUNEL test) and by transmission and scanning electron microscopy. All fibrin glues were measured for TGF-beta 1 and 2 with a specific ELISA.

RESULTS

After incubation of cell suspension in autologous fibrin glue, the morphology of cells is chondrocyte-like. Spindly, process-bearing cells were seen in commercial fibrin glue. Cells suspended in commercial fibrin glue revealed a significant higher percentage of TUNEL positive cells compared to fibrin tissue adhesives mixed with autologous serum (p=0.006). The TGF-beta 1 and 2 concentration was significantly higher in partial autologous fibrin sealant (PAF) compared to their commercial counterparts (p=0.001). Cells seeded on the collagen I/III matrix retained their chondrocytic morphology, while in the type II collagen matrix the chondrocytes displayed a fibroblastic phenotype. The ratio of TUNEL positive cells for the collagen I/III matrix was significantly surpassed by the values, when a collagen II matrix was used (p=0.008). No ingrowth of cells was seen in any of the experimental conditions.

CONCLUSION

Partial autologous fibrin glue and collagen I/III matrices are favourable in respect to migration pattern, morphology and viability, but definitive conclusions can only be drawn after in vivo studies. This will be addressed in future animal studies.

Biochemical characterization of autologous fibrin sealants produced by CryoSeal® and Vivostat® in comparison to the homologous fibrin sealant product Tissucol/Tisseel®

Different principles for production of "autologous fibrin sealant" have been established, and commercial devices employing these methods are nowadays available and used in clinical routine. Users might anticipate for these autologous fibrin sealants features comparable to commercial homologous fibrin sealants, used in surgical routine for many years. However, only little is known about biochemical properties, formation, cross-linking and stability of fibrin sealant clots produced for autologous use with the aid of commercially available devices. We have investigated protein composition, formation and stability of clots obtained from autologuous fibrin sealants produced with commercially available devices (CryoSeal and Vivostat) and compared these parameters to those of the industrially produced homologous fibrin sealant Tissucol/Tisseel. The CryoSeal product is a mixture of many plasma proteins; the Vivostat product and Tissucol/Tisseel appear as comparatively pure plasma derivatives. The products differ in their protein composition and concentrations, including their concentration in fibrin. Significant fibrin alpha and gamma-chain cross-linking by FXIIIa occurs only in Tissucol/Tisseel clots. In test tubes CryoSeal and Vivostat (tranexamic acid-free formulation) fibrin clots liquefy within 1-2 days, but Vivostat (tranexamic acid containing formulation) clots were stable for 4 days and showed partial liquefaction after 5 days. Tissucol/Tisseel clots, containing the protease inhibitor aprotinin, appeared unchanged over the observation period of 5 days. In an in vitro model mimicking in vivo conditions (diffusion of protease inhibitors and proteolytic digestion) clot liquefaction occurs at day 1 for all autologous fibrin sealants clots, with an observable delay for the tranexamic acid containing Vivostat, and day 5 for Tissucol/Tisseel clots. Characterization of the CryoSeal and Vivostat fibrin sealants and Tissucol/Tisseel and their performance show a clear difference in biochemical properties.

Tissue-engineered Cartilage Using Fibrin/Hyaluronan Composite Gel and Its In Vivo Implantation

The importance of scaffold biomaterials has been emphasized for in vitro culture of tissue-engineered cartilage in a three-dimensional (3D) environment. In this study, we examined the feasibility of fibrin glue, mixed with hyaluronic acid (HA) as a composite scaffold. Fibrin glue has been a useful cell delivery matrix for cartilage tissue engineering and HA is a key component of normal articular cartilage. Our hypothesis is that compared to fibrin itself, a fibrin/HA composite can have significantly enhanced properties, due mainly to the added benefits of HA in the matrix. Pieces of cartilage were isolated from rabbit knees and the chondrocytes were harvested through enzymatic digestion. Both fibrin and fibrin/HA composite were prepared and subsequently implanted in nude mice (n = 9, each group) for 1, 2, and 4 weeks, respectively. The retrieved specimens were then analyzed and the results were compared. Cartilage-like tissue formation was detected earlier with fibrin/HA specimens. They produced significantly higher amounts of the extracellular matrix (ECM) molecules, GAG, and collagen at each time point than those in fibrin. Interestingly, the fibrin/HA composite was also competent in maintaining its initial size. Histology--Safranin O/fast green and Alcian blue--of the retrieved specimens found more intense, uniform staining in the fibrin/HA composites. Analysis of the gene expression of the ECM molecules also confirmed the benefits of the composite with added HA in the maintenance of phenotypic stability. The present study suggests that fibrin/HA composite may serve as a dependable cell delivery vehicle as well as a structural basis for tissue-engineered cartilage.

Bacteriological study of autologous cryoprecipitate-derived fibrin glue as the operative sealant

Fibrin glue (FG) is frequently used to seal and cover the anastomoses in many operations such as cardiovascular surgery or orthopaedic surgery. However, in case of gastrointestinal surgery, anastomoses are potentially contaminated, and FG may promote bacterial growth, increasing the risk of leakage. The purpose of this study was to examine the effect of cryoprecipitate-derived FG (CryoFG) on bacterial growth. Bacterial growth on the CryoFG and on the commercial FG (Beriplast P) was evaluated and compared with that on control medium. In addition, the complement activities were evaluated by heat inactivation or addition of guinea-pig complement to the experimental settings. The CryoFG inhibited the growth of Escherichia coli, whereas the commercial FG had no effect. Heat inactivation of the CryoFG inhibited the bactericidal effect of CryoFG. Addition of guinea-pig complement to the heat-inactivated CryoFG could almost restore the bactericidal activity, suggesting the important role of complement. This study showed that the CryoFG preserved the complement activity, which inhibited the in vitro growth of E. coli. Therefore, we concluded that the application of the CryoFG for gastrointestinal surgical anastomoses not only would be safe but also has the advantage of reducing bacterial infection.

Contact pressures at grafted cartilage lesions in the knee

The use of tissue-engineered cellular constructs is currently under clinical evaluation for the surgical treatment of articular cartilage lesions in the knee. The primary failure mode in such cartilage repair techniques is related to fixation. In addition, the repair tissue is believed to be very fragile in the post-operative period, and unable to support the intra-articular loads. We have developed a laboratory testing protocol in order to quantify the contact pressure distribution that develops on fibrin glue grafts applied to full-thickness cartilage lesions. The contact pressure distribution has been mapped on the contact surface of specimens subject to compression, in three configurations (intact, defect and grafted), at increasing load levels. All the maps show stress concentrations at the rim of the defect and a more uniform stress distribution around the rim after defect grafting. At a contact load of 180 N, the peak contact pressure measured on cartilage is 2.5 MPa. In presence of the graft, the peak pressures on the cartilage area surrounding the defect are reduced by 16%, on average. In contrast, both the mean contact pressure on the graft and the graft's contact area increase. The graft was found to carry around 80% of the total applied contact load, at all load levels tested. Fibrin glue was chosen as a grafting material in our study because it shows material properties very representative of currently-implanted cellular constructs. Thus, the results of this study have quantified aspects of recipient graft sites that may assist in optimising such grafting procedures from a biomechanical point of view.

Commercial Fibrin Sealants Are Not Equivalent in a Rabbit Liver-Resection Model Which Quantitatively Evaluates Hemostasis and Formation of Adhesions

A rabbit partial liver resection model was used to determine the hemostatic effectiveness of a new fibrin sealant. Persistent bleeding, with a mean bleeding time of 372 s and blood loss of 18 ml, from a resected lobe of the liver was achieved after rabbits in the untreated control group had been infused continuously with unfractionated heparin over 20 min with 0.2 IU/ml at a rate of 1 ml/min. Spraying the resected surface with the new fibrin sealant, Quixil, reduced bleeding to < 1 ml and the post-resection bleeding times was 25 s. Bleeding time, blood loss and the volume of sealant used in the rabbit model were inversely correlated with the thrombin concentration in the sealant. In direct comparisons with Tissucol and Beriplast, Quixil was associated with the shortest bleeding times, the lowest volume of sealant used and the lowest score of abdominal adhesions.

Overall assessment of regeneration in peripheral nerve lesion repair using fibrin glue, suture, or a combination of the 2 techniques in a rat model. Which is the ideal choice?

BACKGROUND

Nerve repair with fibrin glue is an alternative to conventional suture technique, although there is no definitive experimental evaluation of the 2 techniques. This experimental study was undertaken to evaluate nerve regeneration after sciatic nerve repair with fibrin glue and to compare it with repair performed with suture and a combination of both techniques.

METHODS

Eighty-six male Wistar rats were subjected to right sciatic nerve transection and immediate repair with 4-stitch nylon suture (group A), fibrin glue (group B), or a combination of both techniques (group C). Walking track analysis to access functional recovery was performed preoperatively and 12 weeks postoperatively. Before nerve section and after a 24-week interval, the nerve and motor action potentials (MAPs) were evaluated. Histomorphometric evaluation was carried out 24 weeks after nerve section. Differences between groups were evaluated for significance using the Kruskal-Wallis or analysis of variance methods.

RESULTS

Animals of group B presented better results than those of group A when the functional evaluation was applied (P < .05). When nerve conduction velocity was evaluated at reoperation and the ratio between conduction velocity at reoperation and before the nerve section in MAP evaluation were measured and compared in the 3 groups, the rats of group B presented better results than those of group A (P < .05). Animals of group C presented better results than those of group A when the ratio between nerve conduction velocities was considered. There was no difference between the nerve repair methods when histomorphometric evaluation was performed.

CONCLUSION

In a rat model, nerve repair using fibrin glue provided better conditions for regeneration than suture after sciatic nerve transection.

In vivo biological performance of composites combining micro-macroporous biphasic calcium phosphate granules and fibrin sealant

INTRODUCTION

Fibrin glues are currently used by surgeons and can facilitate the handling of biomaterials. Combining fibrin glue with calcium phosphate bioceramics gives a mouldable composite that cements the granules into the implantation site. In addition to the mechanical aspect of the composite, it has been suggested that the mixture also promotes wound healing. These human blood derivatives contain natural (aprotinin) or synthetic (tranexamic acid) antifibrinolytic substances. We compared the bioactivity of two composites combining calcium phosphate granules with two different types of fibrin glue, one with aprotinin and the other with tranexamic acid.

MATERIALS AND METHODS

The composite was composed of fibrin glue (Tissucol) and 1 to 2 mm granules of biphasic calcium phosphate granules (MBCP) with a volume ratio of 1 for 2. Bone cavities were drilled in 12 New Zealand rabbits and filled with a composite with aprotinin-fibrin glue on the right condyle and one with tranexamic acid-fibrin glue on the left condyle. The rabbits were randomized into two groups: 3 and 6 weeks of delay. Light microscopy, scanning electron microscopy and image analysis were performed.

RESULTS

No adverse reactions were observed in either sample. Bony ingrowth associated with bioceramic resorption by osteoclastic TRAP-positive cells was noted. No significant difference was observed between the two composites. The bony ingrowth and ceramic resorption were qualitatively and quantitatively similar with both composites.

CONCLUSION

This study demonstrated that the choice of a natural (aprotinin) or synthetic (tranexamic acid) antifibrinolytic agent in the fibrin sealant associated with calcium phosphate granules and used as a bone substitute had no effect on the bioactivity of the composite. It remained efficient in bone reconstruction, no adverse effects were observed, and the bony ingrowth was qualitatively and quantitatively equivalent with the two types of fibrin sealant.

The effect of basic fibroblast growth factor on delayed-replanted monkey teeth

BACKGROUND

Basic fibroblast growth factor (bFGF; FGF-2) has been reported to facilitate wound healing and periodontal regeneration in experimental alveolar bone defects. The purpose of this study was to evaluate histologically the effect of topically applied bFGF with or without fibrin glue on delayed-replanted monkey teeth prone to replacement resorption.

METHODS

Forty-five roots from five monkeys were endodontically treated aseptically and then extracted as atraumatically as possible. Ten negative control roots were replanted immediately, while 12 positive control roots were allowed to bench dry for 1 hour prior to replantation, both without further treatment. Roots in the two experimental groups were bench dried for 1 hour, rinsed with saline, and then replanted into sockets filled with bFGF with (11 roots) or without (12 roots) fibrin glue. After 12 weeks, histological sections were prepared and evaluated according to morphometric analysis as complete healing or unfavorable healing composed of inflammatory resorption and replacement resorption.

RESULTS

Kruskal-Wallis and Mann-Whitney U tests showed teeth in the negative control group to have significantly higher complete healing (98.88% +/- 2.30%) and significantly lower unfavorable healing (1.12% +/- 2.30%) than the positive control group and the experimental groups. bFGF/fibrin glue group showed higher occurrence of complete healing (39.06% +/- 41.62%) compared to the bFGF group (25.28% +/- 28.85%) and the positive control group (16.58% +/- 19.60%), although the differences were not significant. Comparing the complete and unfavorable healing, there was no significant difference in the bFGF/fibrin glue group (P = 0.47), but the differences were significant in the other groups (P < 0.05).

CONCLUSION

Topical application of bFGF with fibrin glue showed an insignificantly higher occurrence of complete healing in delayed-replanted monkey teeth.

Thrombelastograph (TEG) analysis of platelet gel formed with different thrombin concentrations

Autologous blood transfusion is the safest and most successful way to decrease transfusion-related risks such as postoperative infections, allo-immunization, and short- and long-term immunosuppression. In addition, these fibrin sealants are known to provide coagulation support at the surgical site and act as an adjunct to the control of postoperative bleeding. The physical formation of autologous platelet fibrin gel clot is dependent on both the common pathway of the coagulation cascade and platelet activation. Platelet gel can help provide control of intraoperative and postoperative bleeding. The Thrombelastograph Hemostasis Analyzer (TEG) measures the viscoelastic properties of a clot as it forms. Based on the information that the TEG provides, it promises to be a good choice for point of care measurement of the integrity of thrombus formed by platelet gels. Bovine blood from a single donor was sequestered into platelet-rich plasma and was made into platelet gel using calcium and three different concentrations of thrombin. The platelet gel samples were then analyzed with the TEG analyzer. The results for MA, tMA, CI, and angle were recorded and statistical analysis was performed to accept or reject the null hypothesis, which is: There is no difference between TEG parameters when analyzing platelet gels formed with calcium chloride, platelet-rich plasma and three different concentrations of thrombin A one-way analysis of variance test was performed between thrombin concentrations for MA (p = 0.19), tMA (p = 0.443), CI (p = 0.257), and angle (p = 0.323). The results showed that thrombin concentration did not affect the MA, tMA, CI, or angle as measured by the TEG analyzer. The null hypothesis was accepted. Based on a one-way analysis of variance test for MA, tMA, CI, and angle there was no significant statistical difference for the TEG samples in this experiment as reported with a 95% confidence interval.

Quantifying platelet gel coagulation using Sonoclot and Thrombelastograph hemostasis analyzer

Little in vitro research exists discussing platelet gel composition and the resulting strength and degradation characteristics using point-of-care technologies. There must be a quantifiable way of determining the structural integrity of the resulting formed platelet gel thrombus. The Thrombelastograph Hemostasis Analyzer (TEG) and Sonoclot measure the elasticity of a clot as it forms and subsequently degrades naturally. The objective of this study was to determine the application of TEG and Sonoclot technologies as point-of-care devices for technicians using platelet gel therapy. The collected bovine blood was anticoagulated with CPD and processed using a previously published plasma sequestration protocol, using normal saline as a wash solution. The resulting platelet-rich plasma was stored in a sequestration bag in a water bath to maintain the blood temperature at 37 degrees C. Sequestered bovine platelet-rich plasma was made into platelet gel using three different thrombin concentrations. A total of 30 experiments were performed on the platelet gel product using both the TEG and the Sonoclot. We discovered that 6 of the Sonoclot tests and 15 of the TEG tests were valid. None of the TEG clot signatures and nine of the Sonoclot signatures were discovered to be invalid. A chi2 test was performed on the resultant data. The value of the chi2 test was calculated to be 12.86, which translated into a p value of less than 0.001. Despite the vast use and growing popularity of platelet gels, a method in which to quantify platelet gels has yet to be reported. There remains a possibility that gels formed with different concentrations of components may prove useful in different areas of surgery or their uses may expand to a broader spectrum of medicine. However, technology to quantify platelet gels must first be standardized. On the basis of the data collected in this study, it was determined that the TEG and the Sonoclot are not equally capable of analyzing platelet gel clots. The TEG is a valid means for analysis, whereas the Sonoclot provided unreliable analysis based on a Chi-squared test.

Expression of transforming growth factor-beta and extracellular matrix by human peritoneal mesothelial cells and by fibroblasts from normal peritoneum and adhesions: effect of Tisseel

We have previously shown that fibroblasts obtained from adhesions produce greater amounts of transforming growth factor-beta 1 (TGF-beta1) and extracellular matrix (ECM) molecules than normal fibroblasts isolated from normal peritoneum. The purpose of the current studies was to examine the effect of Tisseel (Baxter Healthcare Corporation, Glendale, CA), a fibrin sealant containing fibrinogen, aprotinin (a protease inhibitor), thrombin, and CaC1(2), on TGF-beta1 and ECM production by human peritoneal mesothelial cells, normal peritoneal fibroblasts, and adhesion fibroblasts. Multiplex reverse transcription-polymerase chain reaction using beta-actin as a housekeeping gene was used to determine mRNA levels of TGF-beta1 and ECM in these cells at 6, 12, 24, and 48 hours under normoxic conditions in the following treatment groups : fibrin sealant (Tisseel) alone; fibrin sealant with the two components diluted 1 : 2; fibrin sealant with the sealer protein component reconstituted without aprotinin (a protease inhibitor); fibrin sealant with the sealer protein component reconstituted without aprotinin (and both components diluted 1 : 2); fibrin sealant components diluted to physiologic concentrations; and control (culture media). The test compositions had little effect on TGF-beta1 mRNA expression in mesothelial cells and normal peritoneal fibroblasts, but resulted in a marked reduction of TGF-beta1 from adhesion fibroblasts. Expression of type I collagen by human peritoneal mesothelial cells was not detected; the compositions reduced type I collagen mRNA expression by both types of fibroblasts. Type III collagen was detected at six hours, and increased approximately 50 percent by culturing for 48 hours. Tisseel at full strength and with both components diluted 1 : 2 initially increased type III collagen mRNA levels; in contrast, type III collagen mRNA levels were reduced in mesothelial cells by the fibrin sealant without aprotinin at both concentrations and at physiologic concentrations. In both types of fibroblasts, the Tisseel compositions reduced type III collagen mRNA expression. Fibronectin mRNA were transiently reduced at six hours by approximately 50 percent in the presence of the Tisseel components, but then returned to control levels. Fibronectin mRNA levels were not altered in normal peritoneal fibroblasts, but were reduced by all but the physiologic concentration in adhesion fibroblasts. Tisseel may modulate human peritoneal mesothelial cell, normal peritoneal fibroblast, and adhesion fibroblast function. These results suggest that fibrin sealant prepared from the Tisseel kit without aprotinin has the ability to reduce ECM and TGF-beta1 mRNA levels, especially from adhesion fibroblasts, which may indicate a role in reduction of postoperative adhesion development.

Paradoxical effects of elastase inhibitor guamerin on the tissue repair of two different wound models: sealed cutaneous and exposed tongue wounds

Innate elastase inhibitors are known to be putatively involved in the regulation of tissue inflammation by inhibiting polymorphonuclear leukocyte (PMN) derived proteinases. The aim of this study was to evaluate affects of leukocyte elastase suppression and PMN infiltration on wound healing in mouse by administering the recombinant elastase inhibitor guamerin (rEIG) in two different wound models; 1) impaired pin-punctured dorsal mucosa of anterior tongue wound, 60 mice, treated with saline containing rEIG that were fed ad libitum and 2) stable linear excisional cutaneous wound, 40 mice, covered with fibrin sealant containing rEIG. The progress of healing was analyzed by histological methods. The tongue wounds treated with rEIG became edematous around the pin-punctured tongue wound, and influx of inflammatory cells and PMN into the underlying stromal tissue were seen rapidly after wounding and peaked between 2-4 days. Whereas the control mice showed almost no wheal formation in the pin-punctured wound, a far lesser levels of PMN infiltration, and almost complete wound closure in 4 days. In the other model, the liner excisional cutaneous wound treated with fibrin sealant containing rEIG showed early wound constriction, lesser degree of inflammatory cells influx, and complete reepithelialization in 4-5 days, whereas the wound of control mice with the fibrin sealant alone showed contrary delayed reepithelialization, greater degree of inflammatory cell infiltration, and consequencial formation of greater granulation tissue at wound site. Taken together, these data suggest paradoxical effects of rEIG on the wound healing where in the wound exposed to infiltrating milieu of microorganisms in the oral cavity, the rEIG aggravates the wound healing by interfering with other innate defensive factors and extended greater flux of PMNs to inflamed wound site, while in the wound enclosed by fibrin, the rEIG accelerated wound healing by inhibiting the inflammation-generated proteases and the acute inflammatory reaction.

Autologous fibrin glue in peripheral nerve regeneration in vivo

The activity of several growth factors on peripheral nerve regeneration is reported. Autologous fibrin glue contains a large number of platelets, which release significant quantities of growth factors. In order to understand the role of autologous fibrin glue in peripheral nerve regeneration, a 15-mm rabbit peroneal nerve defect was repaired using a vein graft filled with autologous fibrin glue. Axonal regeneration was examined using histological and electrophysiological methods. The extent of axonal regeneration was superior when treated with autologous fibrin glue. Our data suggest that fibrin nets formed by fibrinogen, in combination with growth factors present in autologous fibrin glue, might effectively promote peripheral nerve regeneration in nerve defects.

The efficacy of fibrin sealant in prevention of anastomotic leak after laparoscopic gastric bypass

BACKGROUND

Anastomotic leak after laparoscopic gastric bypass (GBP) can result in significant morbidity, mortality, and consumption of healthcare resources. Fibrin sealant has been used clinically in the prevention of leak; however, its efficacy has not been clearly demonstrated. The aims of this study were to (1) develop an iatrogenic leak model in swine, (2) examine the efficacy of fibrin sealant in sealing iatrogenic anastomotic leak, and (3) review our experience with the use of fibrin sealant in 66 patients who underwent laparoscopic GBP.

METHODS

This study was performed in three phases. In phase 1, laparoscopic gastrojejunostomy was performed in adult swine with iatrogenic disruption of the anastomotic staple line. The size of disruption was sequentially increased (6- to 12-F opening) until a leak model was developed. In phase 2, 16 animals underwent laparoscopic gastrojejunostomy with a 12-F disruption of the anastomosis; 10 animals (study group) had fibrin sealant (Tisseel VH) applied on the disrupted anastomosis and 6 animals (control group) did not receive fibrin sealant. Animals were sacrificed on postoperative day 5 or earlier if peritonitis developed and were examined for sealing of the anastomotic disruption and the presence of intraabdominal abscess. In phase 3, the outcome of 66 consecutive patients who underwent laparoscopic GBP with fibrin sealant applied at the gastrojejunostomy was reviewed.

RESULTS

In phase 1, an anastomotic leak model was developed with a 12-F disruption of the staple line. In phase 2, two control animals required early sacrifice for bile peritonitis; three control animals had intraabdominal abscess discovered at sacrifice and one animal did not have any evidence of intraabdominal abscess or leak. Of the 10 animals in the study group, all survived until sacrifice and none of these animals had evidence of intraabdominal abscess or persistent leak. Therefore, 83% of animals in the control group developed either leak or abscess compared to 0% in the study group (P < 0.01, Fisher's exact test). Clinically, no leak or intraabdominal abscess developed in 66 patients who underwent laparoscopic GBP with the use of fibrin sealant.

CONCLUSIONS

An anastomotic leak model was developed in swine with disruption of the stapled gastrojejunostomy to a 12-F opening. The use of fibrin sealant significantly reduces leak and abscess complication. Our results support the tissue sealing property of fibrin sealant and its use on high-risk gastrointestinal anastomosis.

Validating the Subcutaneous Model of Injectable Autologous Cartilage Using a Fibrin Glue Scaffold

PURPOSE

To create and validate an injectable model for autologous in vivo cartilage engineering with ultimate clinical applicability in human subjects.

HYPOTHESIS

Cartilage can be generated subcutaneously using fibrin glue and autologous chondrocyte components.

BACKGROUND

To date, cartilage engineering studies have been limited by several factors. Immunocompromised animals and nonautologous chondrocytes have been successfully used to create cartilage, but results using identical designs failed in immunocompetent subjects. Recent studies using more biocompatible tissues and matrices have been performed with both in vitro and in vivo steps. Although successful, several problems are notable. In vitro cartilage displays a poor modulus of elasticity, even after in vivo implantation. Variable deformation and volume loss occurs when in vitro specimens are matured in vivo. These concerns limit the clinical utility of these methods. We therefore set out to create autologous cartilage using a model that was clinically feasible, easy to create, and could be performed with very low patient harvest morbidity.

MATERIALS AND METHODS

Eight New Zealand white rabbits underwent a unilateral harvest of ear cartilage. Samples were then digested using standard methods. Cell counts and survival assays were performed before implantation. One sample of fibrin glue (Tisseel) and chondrocytes was injected subcutaneously into each donor rabbit and then left in situ for 3 months. A second sample with both basic fibroblast growth factor (b-FGF) and insulin-like growth factor (IGF)-1 in the injection suspension was also assessed (for a total of 16 samples). After harvest, analysis of overall volume, histology, and chondrocyte drop out counts was performed.

RESULTS

Cartilage formation occurred in 8 of 14 (57%) specimens that were obtained at the time of sacrifice. Of note, 6 of 7 (85%) non-growth-factor containing samples yielded positive results. Comparison with the success rate using concomitant growth factors (2/7) showed a negative effect on cartilage yield (P = .015). Chondrocyte survival, based on chondrocyte dropout counts, was not effected. Angiogenesis appeared to correlate with cartilage formation in the central regions of the implant. Alcian blue demonstrated the presence of active matrix deposition, and elastin Verhoff-van Geison (EVG) stains were positive, showing an elastic cartilage phenotype. Very limited osteoid formation was seen in successful implants. Failed implants demonstrated avascular necrosis, giant cell reactions, and inflammatory infiltrates.

CONCLUSIONS

This study validates the subcutaneous site as a recipient bed for the engineering of autologous cartilage in vivo. It also represents the first subcutaneous implantation of fibrin glue and chondrocytes in an immunocompetent host as well as the first published report of elastic cartilage generation in vivo. Although the model needs to be further streamlined to increase yields and overall volume, this study clearly demonstrates the feasibility of in vivo chondrogenesis (85% success). The addition of FGF and IGF-1 at the concentrations used negatively influenced cartilage yield. However, extrapolation of these results to other combinations or concentrations can not be done, and this issue deserves further investigation.

Biological in vitro effects of fibrin glue: fibroblast proliferation, expression and binding of growth factors

BACKGROUND

Fibrin glue is used in the endoscopic therapy of bleeding ulcerations. Accelerated closure of ulcers has been documented for this treatment in comparison with other injection techniques; the biological reason, however, remains unclear.

METHODS

In an in vitro model the effects of fibrin glue on the expression and secretion of growth factors by gastric epithelial (AGS, KATO III) and mesenchymal cells (fibroblasts) as well as their proliferative response and their interaction were compared with those of other matrices.

RESULTS

Native fibrin glue does not release vascular endothelial growth factor (VEGF) but is able to bind this growth factor in biologically relevant concentrations of 152.6 pg/mL. The addition of fibrin glue to a collagen type I matrix led to an increased proliferation rate of gastric wall fibroblasts. The transcription of VEGF and platelet-derived growth factor (PDGF) mRNA was significantly increased in epithelial cells. Co-culture of fibroblasts grown on fibrin glue containing matrix and epithelial cells resulted in an increased secretion of VEGF by both cell lines.

CONCLUSIONS

Fibrin glue leads to increased proliferation of fibroblasts and local accumulation of VEGF. These findings might at least partly explain the accelerated closure of bleeding ulcers treated by fibrin glue injection.