Impact of an irreversibly adsorbed layer on local viscosity of nanoconfined polymer melts

We report the origin of the effect of nanoscale confinement on the local viscosity of entangled polystyrene (PS) films at temperatures far above the glass transition temperature. By using marker x-ray photon correlation spectroscopy with gold nanoparticles embedded in the PS films prepared on solid substrates, we have determined the local viscosity as a function of the distance from the polymer-substrate interface. The results show the impact of a very thin adsorbed layer (~7 nm in thickness) even without specific interactions of the polymer with the substrate, overcoming the effect of a surface mobile layer at the air-polymer interface and thereby resulting in a significant increase in the local viscosity as approaching the substrate interface.

Targeted gene silencing of TLR4 using liposomal nanoparticles for preventing liver ischemia reperfusion injury

RNAi-based therapy is a promising strategy for the prevention of ischemia-reperfusion injury (IRI). However, systemic administration of small interfering RNA (siRNA) may cause globally nonspecific targeting of all tissues, which impedes clinical use. Here we report a hepatocyte-specific delivery system for the treatment of liver IRI, using galactose-conjugated liposome nanoparticles (Gal-LipoNP). Heptocyte-specific targeting was validated by selective in vivo delivery as observed by increased Gal-LipoNP accumulation and gene silencing in the liver. Gal-LipoNP TLR4 siRNA treatment resulted in a significant decrease of serum alanine transferase (ALT) and aspartate transaminase (AST) in a hepatic IRI model. Histopathology displayed an overall reduction of the injury area in the Gal-LipoNP TLR4 siRNA treated mice. Additionally, neutrophil accumulation and lipid peroxidase-mediated tissue injury, detected by MPO, MDA and ROS respectively, were attenuated after Gal-LipoNP TLR4 siRNA treatment. Moreover, therapeutic effects of Gal-LipoNP TLR4 siRNA were associated with suppression of the inflammatory cytokines IL-1 and TNF-α. Taken together, this study is the first demonstration of liver IRI treatment using liver-specific siRNA delivery.

Surface EMG classification during dynamic contractions for multifunction transradial prostheses

High usability myo-controlled devices require robust classification schemes during dynamic contractions. Therefore, this study investigates the impact of the training data set on the performance of several pattern recognition algorithms during dynamic contractions. It is shown that combined with a threshold to detect the onset of the contraction, current pattern recognition algorithms used on static conditions can maintain relatively high classification accuracy on dynamic situations. Moreover, the performance of the pattern recognition algorithms tested improved by optimizing the choice of the training set. Finally, the results also showed that rather simple approaches for classification of time-domain features provide results comparable to more complex classification methods of wavelet features.

Identifying multiple configurations of complex molecules in dynamical processes: time resolved tunneling spectroscopy and density functional theory calculation

We report for the first time a new methodology to determine molecular configurations of a large molecular complex in a dynamical process on a metal surface by combining time-resolved tunneling spectroscopy (I-t) and density functional theory calculation (DFT). Two examples, (t-Bu)4-ZnPc and FePc, representing molecular rotation and lateral diffusion on Au(111) surfaces, respectively, were applied to demonstrate our method. Through analysis of statistical occupation time for each configuration, the molecular configuration numbers and energy differences between different configurations of these molecular systems could be unambiguously determined. These experimental results are further compared with DFT calculation to determine corresponding molecular configurations. Importantly, through the spatial I-t mapping, valuable insights of molecular surface diffusion paths are obtained.

Diffusivity control in molecule-on-metal systems using electric fields

The development of methods for controlling the motion and arrangement of molecules adsorbed on a metal surface would provide a powerful tool for the design of molecular electronic devices. Recently, metal phthalocyanines (MPc) have been extensively considered for use in such devices. Here we show that applied electric fields can be used to turn off the diffusivity of iron phthalocyanine (FePc) on Au(111) at fixed temperature, demonstrating a practical and direct method for controlling and potentially patterning FePc layers. Using scanning tunneling microscopy, we show that the diffusivity of FePc on Au(111) is a strong function of temperature and that applied electric fields can be used to retard or enhance molecular diffusion at fixed temperature. Using spin-dependent density-functional calculations, we then explore the origin of this effect, showing that applied fields modify both the molecule-surface binding energies and the molecular diffusion barriers through an interaction with the dipolar Fe-Au adsorption bond. On the basis of these results FePc on Au(111) is a promising candidate system for the development of adaptive molecular device structures.

Acoustical evaluation of carbonized and activated cotton nonwovens

An activated carbon fiber nonwoven (ACF) was manufactured from a cotton nonwoven fabric. For the ACF acoustic application, a nonwoven composite of ACF with cotton nonwoven as a base layer was developed. Also produced were the composites of the cotton nonwoven base layer with a layer of glassfiber nonwoven, and the cotton nonwoven base layer with a layer of cotton fiber nonwoven. Their noise absorption coefficients and sound transmission loss were measured using the Brüel and Kjaer impedance tube instrument. Statistical significance of the differences between the composites was tested using the method of Duncan's grouping. The study concluded that the ACF composite exhibited a greater ability to absorb normal incidence sound waves than the composites with either glassfiber or cotton fiber. The analysis of sound transmission loss revealed that the three composites still obeyed the mass law of transmission loss. The composite with the surface layer of cotton fiber nonwoven possessed a higher fabric density and therefore showed a better sound insulation than the composites with glassfiber and ACF.

Constructing an array of anchored single-molecule rotors on gold surfaces

Molecular rotors with a fixed off-center rotation axis have been observed for single tetra-tert-butyl zinc phthalocyanine molecules on an Au(111) surface by a scanning tunneling microscope at LN2 temperature. Experiments and first-principles calculations reveal that we introduce gold adatoms at the surface as the stable contact of the molecule to the surface. An off-center rotation axis is formed by a chemical bonding between a nitrogen atom of the molecule and a gold adatom at the surface, which gives them a well-defined contact while the molecules can have rotation-favorable configurations. Furthermore, these single-molecule rotors self-assemble into large scale ordered arrays on Au(111) surfaces. A fixed rotation axis off center is an important step towards the eventual fabrication of molecular motors or generators.

A pulse-burst laser system for a high-repetition-rate Thomson scattering diagnostic

A "pulse-burst" laser system is being constructed for addition to the Thomson scattering diagnostic on the Madison Symmetric Torus (MST) reversed-field pinch. This laser is designed to produce a burst of up to 200 approximately 1 J Q-switched pulses at repetition frequencies 5-250 kHz. This laser system will operate at 1064 nm and is a master oscillator, power amplifier. The master oscillator is a compact diode-pumped Nd:YVO(4) laser, intermediate amplifier stages are flashlamp-pumped Nd:YAG, and final stages will be flashlamp-pumped Nd:glass (silicate). Variable pulse width drive (0.3-20 ms) of the flashlamps is accomplished by insulated-gate bipolar transistor switching of large electrolytic capacitor banks. The burst train of laser pulses will enable the study of electron temperature (T(e)) and electron density (n(e)) dynamics in a single MST shot, and with ensembling, will enable correlation of T(e) and n(e) fluctuations with other fluctuating quantities.

Site-specific kondo effect at ambient temperatures in iron-based molecules

Kondo resonances are a very precise measure of spin-polarized transport through magnetic impurities. However, the Kondo temperature, indicating the thermal range of stability of the magnetic properties, is very low. By contrast, we find for iron phthalocyanine a Kondo temperature in spectroscopic measurements which is well above room temperature. It is also shown that the signal of the resonance depends strongly on the adsorption site of the molecule on a gold surface. Experimental data are verified by extensive numerical simulations, which establish that the coupling between iron states and states of the substrate depends strongly on the adsorption configuration.

Heat sensitization in skin and muscle nociceptors expressing distinct combinations of TRPV1 and TRPV2 protein

Recordings were made from small and medium diameter dorsal root ganglia (DRG) neurons that expressed transient receptor potential (TRP) proteins. Physiologically characterized skin nociceptors expressed either TRPV1 (type 2) or TRPV2 (type 4) in isolation. Other nociceptors co-expressed both TRP proteins and innervated deep tissue sites (gastrocnemius muscle, distal colon; type 5, type 8) and skin (type 8). Subpopulations of myelinated (type 8) and unmyelinated (type 5) nociceptors co-expressed both TRPs. Cells that expressed TRPV1 were excellent transducers of intense heat. Proportional inward currents were obtained from a threshold of approximately 46.5 to approximately 56 degrees C. In contrast, cells expressing TRPV2 alone (52 degrees C threshold) did not reliably transduce the intensity of thermal events. Studies were undertaken to assess the capacity of skin and deep nociceptors to exhibit sensitization to repeated intense thermal stimuli [heat-heat sensitization (HHS)]. Only nociceptors that expressed TRPV2, alone or in combination with TRPV1, exhibited HHS. HHS was shown to be Ca(2+) dependent in either case. Intracellular Ca(2+) dependent pathways to HHS varied with the pattern of TRP protein expression. Cells co-expressing both TRPs modulated heat reactivity through serine/threonine phosphorylation or PLA(2)-dependent pathways. Cells expressing only TRPV2 may have relied on tyrosine kinases for HHS. We conclude that heat sensitization in deep and superficial capsaicin and capsaicin-insensitive C and Adelta nociceptors varies with the distribution of TRPV1 and TRPV2 proteins. The expression pattern of these proteins are specific to subclasses of physiologically identified C and A fiber nociceptors with highly restricted tissue targets.

Screening and characterization of yeasts for xylitol production

AIMS

To discover novel naturally occurring xylitol producing yeast species with potential for industrial applications.

METHODS AND RESULTS

Exactly 274 strains were cultivated on both solid and liquid screening medium with xylose as the sole carbon resource. Five strains were selected on the basis of significant growth and high degree of xylose assimilation. Their phylogenetic position was confirmed by the PCR-RFLP and sequence analysis of the D1/D2 domain of the 5' end of the large subunit rDNA gene (5'-LSU rDNA). Enzymatic analysis was conducted to compare xylose metabolism in each strain. Candida guilliermondii Xu280 and Candida maltosa Xu316 were found to have high xylose consumption rates and xylitol yields in the batch fermentation under micro-aerobic condition. The effect of the different media with high initial xylose concentration on biosynthesis of xylitol by both strains was investigated.

CONCLUSIONS

We have identified Candida spp. strains, which exhibit high levels of xylitol production from xylose suggesting that these may have potential for industrial applications.

SIGNIFICANCE AND IMPACTS OF THE STUDY

Microbial species are of importance for xylitol production. Xylitol production involves complicated metabolic regulation including xylose transport, production of key enzymes and cofactor regeneration. Thus, screening of naturally occurring xylose-utilizing micro-organisms is a viable and effective mean to obtain xylitol producing organisms with industrial application. Moreover, the research on selected strains will contribute to a better understanding of regulatory properties of xylose metabolism in different yeasts.

Cloning and molecular characterization of a gene coding D-xylulokinase (CmXYL3) from Candida maltosa

AIMS

To clone and identify a gene (CmXYL3) coding D-xylulokinase from Candida maltosa Xu316 and understand its physiological function.

METHODS AND RESULTS

Based on the conserved regions of the known D-xylulokinase-encoding genes, a pair of degenerate primers was designed to clone the CmXYL3 gene from C. maltosa Xu316. The coding region and sequences flanking the CmXYL3 gene were obtained by PCR-based DNA walking method. Southern blotting analysis suggested that there is a single copy of the CmXYL3 gene in the genome. The open reading frame starting from ATG and ending with TAG stop codon encoded 616 amino acids with a calculated molecular mass of 68889.743 Da. The CmXYL3 gene under the control of the GPD1 promoter was heterologously expressed in Saccharomyces cerevisiae deficient in D-xylulokinase (deltaScXKS1::LEU2) activity, and restored growth on D-xylulose. The specific activity of D-xylulokinase varied during xylose fermentation and was correlated with aeration level. After growth on different pentoses and pentitols as sole carbon sources, the highest specific activity of D-xylulokinase was observed on D-xylose.

CONCLUSIONS

The CmXYL3 gene isolated from C. maltosa Xu316 encodes a novel D-xylulokinase that plays a pivotal role in xylulose metabolism.

SIGNIFICANCE AND IMPACT OF THE STUDY

This is the first report that describes the isolation and cloning of D-xylulokinase gene (CmXYL3) from C. maltosa Xu316. D-xylulokinase is pivotal for growth and product formation during xylose metabolism. Better understanding of the biochemical properties and the physiological function of D-xylulokinase will contribute to optimizing fermentation conditions and determining the strategies for metabolic engineering of C. maltosa Xu316 for further improvement of xylitol yield and productivity.

The Generation of Extracellular DNA in SLE: the Role of Death and Sex

DNA is a large macromolecule that plays a central role in the pathogenesis of systemic lupus erythematosus (SLE), serving as a target antigen of autoantibodies as well as a major component of immune complexes. These complexes can both promote immune disturbances as well as deposit in the kidney to incite inflammation. While the origin of anti-DNA autoantibodies in SLE has received intense investigation, the mechanisms by which DNA exits cells to form immune complexes in the circulation is not well understood. To determine the origin of DNA circulating in the blood in SLE, our laboratory has been using a murine model system to track the in vivo fate of DNA from Jurkat T cells that have been made apoptotic or necrotic in vitro and then administered to mice. Results of these studies indicate that DNA from apoptotic and necrotic cells appears in the blood in a time- and dose-dependent manner. Irrespective of origin, this DNA has properties of nucleosomes as shown by its molecular weight. The process of release requires the presence of macrophages and can be modified by glucocorticoids as well as inflammation. In addition, sex may play a role in the generation of extracellular DNA from dead cells as male and female mice differ in their responses in this model. Together, these studies clarify the origin of extracellular DNA circulating in the blood in SLE and suggest steps in this process that can be interdicted by novel therapy.

Proton sensitivity Ca2+ permeability and molecular basis of acid-sensing ion channels expressed in glabrous and hairy skin afferents

We contrasted the physiology and peripheral targets of subclassified nociceptive and nonnociceptive afferents that express acid-sensing ion channel (ASIC)-like currents. The threshold for current activation was similar in eight distinct cell subclasses regardless of functional modality (pH 6.8). When potency was determined from concentration-response curves, nonnociceptors exhibited currents with significantly greater potency than that of all but one class of nociceptors (pH50 = 6.54 and 6.75 vs. 6.20-6.34). In nonnociceptive cells, acid transduction was also confined to a very narrow range (0.1-0.3 vs. 0.8-1.4 pH units for nociceptors). Simultaneous whole cell recording and ratiometric imaging of three peptidergic nociceptive classes were consistent with the expression of Ca2+ -permeable ASICs. Sensitivity to psalmotoxin and flurbiprofen indicated the presence of Ca2+ -permeable ASIC1a. Immunocytochemistry on these subclassified populations revealed a differential distribution of five ASIC proteins consistent with Ca2+ permeability and differential kinetics of proton-gated currents (type 5: ASIC1a, 1b, 2a, 2b, 3; type 8a: ASIC1a, 1b, 3; type 8b: ASIC1a, 1b, 2a, 2b, 3). Using DiI tracing, we found that nociceptive classes had discrete peripheral targets. ASIC-expressing types 8a and 9 projected to hairy skin, but only types 8a and 13 projected to glabrous skin. Non-ASIC-expressing types 2 and 4 were present only in hairy skin. We conclude that ASIC-expressing nociceptors differ from ASIC-expressing nonnociceptors mainly by range of proton reactivity. ASIC- as well as non-ASIC-expressing nociceptors have highly distinct cutaneous targets, and only one class was consistent with the existence of a generic C polymodal nociceptor (type 8a).