Left ventricular strain and peak systolic velocity: responses to controlled changes in load and contractility, explored in a porcine model

BACKGROUND

Tissue velocity echocardiography is increasingly used to evaluate global and regional cardiac function. Previous studies have suggested that the quantitative measurements obtained during ejection are reliable indices of contractility, though their load-sensitivity has been studied in different settings, but still remains a matter of controversy. We sought to characterize the effects of acute load change (both preload and afterload) and change in inotropic state on peak systolic velocity and strain as a measure of LV contractility.

METHODS

Thirteen anesthetized juvenile pigs were studied, using direct measurement of left ventricular pressure and volume and transthoracic echocardiography. Transient inflation of a vena cava balloon catheter produced controlled load alterations. At least eight consecutive beats in the sequence were analyzed with tissue velocity echocardiography during the load alteration and analyzed for change in peak systolic velocities and strain during same contractile status with a controlled load alteration. Two pharmacological inotropic interventions were also included to generate several myocardial contractile conditions in each animal.

RESULTS

Peak systolic velocities reflected the drug-induced changes in contractility in both radial and longitudinal axis. During the acute load change, the peak systolic velocities remain stable when derived from signal in the longitudinal axis and from the radial axis. The peak systolic velocity parameter demonstrated no strong relation to either load or inotropic intervention, that is, it remained unchanged when load was systematically and progressively varied (peak systolic velocity, longitudinal axis, control group beat 1-5.72 ± 1.36 with beat 8-6.49 ± 1.28 cm/sec, 95% confidence interval), with the single exception of the negative inotropic intervention group where peak systolic velocity decreased a small amount during load reduction (beat 1-3.98 ± 0.92 with beat 8-2.72 ± 0.89 cm/sec). Systolic strain, however, showed a clear degree of load-dependence.

CONCLUSIONS

Peak systolic velocity appears to be load-independent as tested by beat-to-beat load reduction, while peak systolic strain appears to be load-dependent in this model. Peak systolic velocity, in a controlled experimental model where successive beats during load alteration are assessed, has a strong relation to contractility. Peak systolic velocity, but not peak strain rate, is largely independent of load, in this model. More study is needed to confirm this finding in the clinical setting.

EMG-driven modeling approach to muscle force and joint load estimations: case study in knee osteoarthritis

It is important to know the magnitude and patterns of joint loading in people with knee osteoarthritis (OA), since altered loads are implicated in onset and progression of the disease. We used an EMG-driven forward dynamics model to estimate joint loads during walking in a subject with knee OA and a healthy control subject. Kinematic, kinetic, and surface EMG data were used to predict muscle forces using a Hill-type muscle model. The muscle forces were used to balance the frontal plane moment to obtain medial and lateral condylar loads. Loads were normalized to body weight (BWs) and the mean of three trials taken. The OA subject had greater medial and lower lateral loads compared to the control subject. Seventy-five to 80% of the total load was borne on the medial compartment in the control subject, compared to 90-95% in the OA subject. In fact, complete lateral unloading occurred during midstance for the OA subject. Loading for the healthy subject was consistent with the data from instrumented knee studies. In the future, the model can be used to analyze the impact of various interventions to reduce the loads on the medial compartment in people with knee OA.

Mechanical load inhibits IL-1 induced matrix degradation in articular cartilage

OBJECTIVE

Osteoarthritis is a disease process of cellular degradation of articular cartilage caused by mechanical loads and inflammatory cytokines. We studied the cellular response in native cartilage subjected to a mechanical load administered simultaneously with an inflammatory cytokine interleukin-1 (IL-1), hypothesizing that the combination of load and cytokine would result in accelerated extracellular matrix (ECM) degradation.

METHODS

Mature bovine articular cartilage was loaded for 3 days (stimulation) with 0.2 and 0.5 MPa stresses, with and without IL-1 (IL-1alpha, 10 ng/ml), followed by 3 days of no stimulation (recovery). Aggrecan and collagen loss were measured as well as aggrecan cleavage using monoclonal antibodies AF-28 and BC-3 for cleavage by aggrecanases (ADAMTS) and matrix metalloproteinases (MMPs), respectively.

RESULTS

Incubation with IL-1 caused aggrecan cleavage by aggrecanases and MMPs during the 3 days of stimulation. A load of 0.5 MPa inhibited the IL-1-induced aggrecan loss while no inhibition was found for the 0.2 MPa stress. There was no collagen loss during the treatments but upon load and IL-1 removal proteoglycan and collagen loss increased. Load itself under these conditions was found to have no effect when compared to the unloaded controls.

CONCLUSIONS

A mechanical load of sufficient magnitude can inhibit ECM degradation by chondrocytes when stimulated by IL-1. The molecular mechanisms involved in this process are not clear but probably involve altered mechanochemical signal transduction between the ECM and chondrocyte.

Incorporating Uncertainty Into the Ranking of SPARROW Model Nutrient Yields From Mississippi/Atchafalaya River Basin Watersheds

Excessive loads of nutrients transported by tributary rivers have been linked to hypoxia in the Gulf of Mexico. Management efforts to reduce the hypoxic zone in the Gulf of Mexico and improve the water quality of rivers and streams could benefit from targeting nutrient reductions toward watersheds with the highest nutrient yields delivered to sensitive downstream waters. One challenge is that most conventional watershed modeling approaches (e.g., mechanistic models) used in these management decisions do not consider uncertainties in the predictions of nutrient yields and their downstream delivery. The increasing use of parameter estimation procedures to statistically estimate model coefficients, however, allows uncertainties in these predictions to be reliably estimated. Here, we use a robust bootstrapping procedure applied to the results of a previous application of the hybrid statistical/mechanistic watershed model SPARROW (Spatially Referenced Regression On Watershed attributes) to develop a statistically reliable method for identifying "high priority" areas for management, based on a probabilistic ranking of delivered nutrient yields from watersheds throughout a basin. The method is designed to be used by managers to prioritize watersheds where additional stream monitoring and evaluations of nutrient-reduction strategies could be undertaken. Our ranking procedure incorporates information on the confidence intervals of model predictions and the corresponding watershed rankings of the delivered nutrient yields. From this quantified uncertainty, we estimate the probability that individual watersheds are among a collection of watersheds that have the highest delivered nutrient yields. We illustrate the application of the procedure to 818 eight-digit Hydrologic Unit Code watersheds in the Mississippi/Atchafalaya River basin by identifying 150 watersheds having the highest delivered nutrient yields to the Gulf of Mexico. Highest delivered yields were from watersheds in the Central Mississippi, Ohio, and Lower Mississippi River basins. With 90% confidence, only a few watersheds can be reliably placed into the highest 150 category; however, many more watersheds can be removed from consideration as not belonging to the highest 150 category. Results from this ranking procedure provide robust information on watershed nutrient yields that can benefit management efforts to reduce nutrient loadings to downstream coastal waters, such as the Gulf of Mexico, or to local receiving streams and reservoirs.

Genomic convergence to identify candidate genes for Alzheimer disease on chromosome 10

A broad region of chromosome 10 (chr10) has engendered continued interest in the etiology of late-onset Alzheimer Disease (LOAD) from both linkage and candidate gene studies. However, there is a very extensive heterogeneity on chr10. We converged linkage analysis and gene expression data using the concept of genomic convergence that suggests that genes showing positive results across multiple different data types are more likely to be involved in AD. We identified and examined 28 genes on chr10 for association with AD in a Caucasian case-control dataset of 506 cases and 558 controls with substantial clinical information. The cases were all LOAD (minimum age at onset > or = 60 years). Both single marker and haplotypic associations were tested in the overall dataset and 8 subsets defined by age, gender, ApoE and clinical status. PTPLA showed allelic, genotypic and haplotypic association in the overall dataset. SORCS1 was significant in the overall data sets (p=0.0025) and most significant in the female subset (allelic association p=0.00002, a 3-locus haplotype had p=0.0005). Odds Ratio of SORCS1 in the female subset was 1.7 (p<0.0001). SORCS1 is an interesting candidate gene involved in the Abeta pathway. Therefore, genetic variations in PTPLA and SORCS1 may be associated and have modest effect to the risk of AD by affecting Abeta pathway. The replication of the effect of these genes in different study populations and search for susceptible variants and functional studies of these genes are necessary to get a better understanding of the roles of the genes in Alzheimer disease.

Age- and sex-related regional compressive strength characteristics of human lumbar vertebrae in osteoporosis

OBJECTIVE

To obtain the compressive load bearing and energy absorption capacity of lumbar vertebrae of osteoporotic elderly for the everyday medical praxis in terms of the simple diagnostic data, like computed tomography (CT), densitometry, age, and sex.

METHODS

Compressive test of 54 osteoporotic cadaver vertebrae L1 and L2, 16 males and 38 females (age range 43-93, mean age 71.6 ± 13.3 years, mean bone mineral density (BMD) 0.377 ± 0.089 g/cm(2), mean T-score -5.57 ± 0.79, Z-score -4.05 ± 0.77) was investigated. Based on the load-displacement diagrams and the measured geometrical parameters of vertebral bodies, proportional, ultimate and yield stresses and strains, Young's modulus, ductility and energy absorption capacity were determined. Three vertebral regions were distinguished: superior, central and inferior regions, but certain parameters were calculated for the upper/ lower intermediate layers, as well. Cross-sectional areas, and certain bone tissue parameters were determined by image analysis of CT pictures of vertebrae. Sex- and age-related decline functions and trends of strength characteristics were determined.

RESULTS

Size-corrected failure load was 15%-25% smaller in women, proportional and ultimate stresses were about 30%-35% smaller for women in any region, and 20%-25% higher in central regions for both sexes. Young's moduli were about 30% smaller in women in any region, and 20%-25% smaller in the central region for both sexes. Small strains were higher in males, large strains were higher in females, namely, proportional strains were about 25% larger in men, yield and ultimate strains were quasi equal for sexes, break strains were 10% higher in women. Ultimate energy absorption capacity was 10%-20% higher in men; the final ductile energy absorption capacity was quasi equal for sexes in all levels. Age-dependence was stronger for men, mainly in central regions (ultimate load, male: r = -0.66, p < 0.01, female: r = -0.52, p < 0.005; ultimate stress, male: r = -0.69, p < 0.01, female: r = -0.50, p < 0.005; Young's modulus, male: r = -0.55, p < 0.05, female: r = -0.52, p < 0.005, ultimate stiffness, male: r = -0.58, p < 0.05, female: r = -0.35, p < 0.03, central ultimate absorbed energy density, male: r = -0.59, p < 0.015, female: r = -0.29, p < 0.08).

CONCLUSIONS

For the strongly osteoporotic population (BMD < 0.4 g/cm(2), T-score < -4) the statical variables (loads, stresses) showed significant correlation; mixed variables (stiffness, Young's modulus, energy) showed moderate correlation; kinematical variables (displacements, strains) showed no correlation with age. The strong correlation of men between BMD and aging (r = -0.82, p < 0.001) and betwen BMD and strength parameters (r = 0.8-0.9, p < 0.001) indicated linear trends in age-related strength loss for men; however, the moderate correlation of women between BMD and aging (r = -0.47, p < 0.005) and between BMD and strength parameters (r = 0.4-0.5, p < 0.005) suggested the need of nonlinear (quadratic) approximation that provided the better fit in age-related strength functions of females modelling postmenopausal disproportionalities.

The effects of 10% front load carriage on the likelihood of slips and falls

The objective of the present study was to evaluate if anterior load carriage would increase the likelihood of slips or falls while walking over a slippery floor surface. The study hypothesized that anterior load carriage may alter spatial-temporal characteristics, such as heel contact velocity, walking velocity (i.e., the whole body center-of-mass velocity), and step length, as well as friction demand characteristics at shoe-floor interface. Additionally, the study hypothesized that alterations in these gait parameters may influence slip initiation characteristics while ambulating over a slippery floor surface. Total of 10 subjects participated in the study: 5 younger (18-28 yr old) and 5 older adults (65 and older). A mixture was used to manipulate the coefficient of friction (COF) of the floor surface. All participants were unexpectedly introduced to a slippery surface while walking with and without a load. To evaluate slip severity, slip distance I and II were evaluated to assess whether a subject fell or not. Three-way repeated measure ANOVA (mix-factor design) was performed: Age factor: between-subject, Load and Floor factors: within-subject. Overall, older adults' heel contact velocity was slower while carrying a load. Additionally, all participants exhibited shorter SL while carrying a load. No significant friction demand characteristic differences were observed for all subjects while carrying a 10% front load. The results from the present study suggest that carrying 10% of the body weight in front should not intensify the slip propensity and severity although appears to influence spatial-temporal gait characteristics.

Microbial load and antimicrobial property of two Nigerian herbal remedies

The use of herbal remedies had increased significantly in the last one decade in Nigeria. This has led to the production of herbal products with bogus claims. The microbial quality and antibacterial properties of two Nigerian herbal remedies with such claimed efficacy of curing all manners of microbial diseases were assessed. The herbal remedies were discovered to be contaminated with the following microorganisms: Bacillus subtilis, Bacillus coagulans, Bacillus cereus, Basidiobotrytis sp, Oedocephalum sp, Varicosporium sp and Articulospora inflata. Antibacterial analysis using the killing rate revealed that the herbal remedies had bacteriostatic and not bacteriocidal effect. Qualitative phytochemical screening of the herbal remedies revealed the presence of saponin, tannins, alkaloids, anthraquinone and cardiac glycosides which suggest possible antimicrobial effect. However, the presence of microbial contaminants in the herbal remedies suggests that they may serve as source of infection to end users.

Land use and stream nitrogen concentrations in agricultural watersheds along the central coast of California

In coastal California nitrogen (N) in runoff from urban and agricultural land is suspected to impair surface water quality of creeks and rivers that discharge into the Monterey Bay Sanctuary. However, quantitative data on the impacts of land use activities on water quality are largely limited to unpublished reports and do not estimate N loading. We report on spatial and temporal patterns of N concentrations for several coastal creeks and rivers in central California. During the 2001 water year, we estimated that the Pajaro River at Chittenden exported 302.4 Mg of total N. Nitrate-N concentrations were typically <1 mg N l(-1) in grazing lands, oak woodlands, and forests, but increased to a range of 1 to 20 mg N l(-1) as surface waters passed through agricultural lands. Very high concentrations of nitrate (in excess of 80 mg N l(-1)) were found in selected agricultural ditches that received drainage from tiles (buried perforated pipes). Nitrate concentrations in these ditches remained high throughout the winter and spring, indicating nitrate was not being flushed out of the soil profile. We believe unused N fertilizer has accumulated in the shallow groundwater through many cropping cycles. Results are being used to organize landowners, resource managers, and growers to develop voluntary monitoring and water quality protection plans.

The Characterization of Linear Polyethylene SRM 1475. IV. Melt Flow Rate

The melt flow rate of SRM 1475 was determined to be 2.07 g/10 min at 190 °C under a load of 325 g by a method similar to procedure A of ASTM method D 1238-65T. This value is the average of determinations on 42 samples with a standard deviation of a single measurement of 0.040 g/10 min, and a range of 1.991 g/10 min to 2.132 g/10 min.