Advancements of Polyvinylpyrrolidone-Based Polymer Electrolyte Membranes for Electrochemical Energy Conversion and Storage Devices

Polymer electrolyte membranes (PEMs) play vital roles in electrochemical energy conversion and storage devices, such as polymer electrolyte membrane fuel cell (PEMFC), redox flow battery, and water electrolysis. As the crucial component of these devices, PEMs need to possess high ion conductivity and electronic insulation, remarkable mechanical and chemical stability, and outstanding isolation function for the materials on both sides of the cathode and anode. Polyvinylpyrrolidone has received widespread attention in the research of PEMs owing to its tertiary amine basic groups and exceptional hydrophilic properties. This review focuses on the application status of polyvinylpyrrolidone-based PEMs in PEMFC, vanadium redox flow battery, and alkaline water electrolysis, and describes in detail the key scientific problems in these fields, providing constructive suggestions and guidance for the application of polyvinylpyrrolidone-based PEMs in electrochemical energy conversion and storage devices.

Cost-Effective Calculation of Collective Electronic Excitations in Graphite Intercalated Compounds

Graphite/graphene intercalation compounds with good and improving electrical transport properties, optical properties, magnetic properties and even superconductivity are widely used in battery, capacitors and so on. Computational simulation helps with predicting important properties and exploring unknown functions, while it is restricted by limited computing resources and insufficient precision. Here, we present a cost-effective study on graphite/graphene intercalation compounds properties with sufficient precision. The calculation of electronic collective excitations in AA-stacking graphite based on the tight-binding model within the random phase approximation framework agrees quite well with previous experimental and calculation work, such as effects of doping level, interlayer distance, and interlayer hopping on 2D π plasmon and 3D intraband plasmon modes. This cost-effective simulation method can be extended to other intercalation compounds with unlimited intercalation species.

Flexible microstructured pressure sensors: design, fabrication and applications

In recent years, flexible pressure sensors have caused widespread concern for their extensive applications in human activity and health monitoring, robotics and prosthesis, as well as human-machine interface. Flexible pressure sensors in these applications are required to have a high sensitivity, large detective limit, linear response, fast response time, and mechanical stability. The mechanisms of capacitive, piezoresistive, and piezoelectric pressure sensors and the strategies to improve their performance are introduced. Sensing layers with microstructures have shown capability to significantly improve the performances of pressure sensors. Various fabrication methods for these structures are reviewed in terms of their pros and cons. Besides, the interference caused by environmental stimuli and internal stress from different directions leads to the infidelity of the signal transmission. Therefore, the anti-interference ability of flexible pressure sensors is highly desired. Several potential applications for flexible pressure sensors are also briefly discussed. Last, we conclude the future challenges for facilely fabricating flexible pressure sensors with high performance and anti-interference ability.

Nematic suspension of a microporous layered silicate obtained by forceless spontaneous delamination via repulsive osmotic swelling for casting high-barrier all-inorganic films

Exploiting the full potential of layered materials for a broad range of applications requires delamination into functional nanosheets. Delamination via repulsive osmotic swelling is driven by thermodynamics and represents the most gentle route to obtain nematic liquid crystals consisting exclusively of single-layer nanosheets. This mechanism was, however, long limited to very few compounds, including 2:1-type clay minerals, layered titanates, or niobates. Despite the great potential of zeolites and their microporous layered counterparts, nanosheet production is challenging and troublesome, and published procedures implied the use of some shearing forces. Here, we present a scalable, eco-friendly, and utter delamination of the microporous layered silicate ilerite into single-layer nanosheets that extends repulsive delamination to the class of layered zeolites. As the sheet diameter is preserved, nematic suspensions with cofacial nanosheets of ≈9000 aspect ratio are obtained that can be cast into oriented films, e.g., for barrier applications.

Silicon-Stereogenic Monohydrosilane: Synthesis and Applications

Optically active organosilanes have been demonstrated to be versatile chiral reagents in synthetic chemistry since the early seminal contributions by Sommer and Corriu. Among these silicon-containing chiral architectures, monohydrosilanes, which bear a Si-H bond, hold a unique position because of their facile transformations through stereospecific Si-carbon or Si-heteroatom bond-formation reactions. In addition, those compounds have also been leveraged as chiral reagents for alcohol resolution, chiral auxiliaries, mechanistic probes, as well as potential optoelectronic materials. This Minireview comprehensively summarizes the synthesis and synthetic applications of silicon-stereogenic monohydrosilanes, particularly the advances in the transition-metal-catalyzed asymmetric synthesis of this class of functional molecules.

Recovery, regeneration and sustainable management of spent adsorbents from wastewater treatment streams: A review

Adsorption is the most widely adopted, effective, and reliable treatment process for the removal of inorganic and organic contaminants from wastewater. One of the major issues with the adsorption-treatment process for the removal of contaminants from wastewater streams is the recovery and sustainable management of spent adsorbents. This review focuses on the effectiveness of emerging adsorbents and how the spent adsorbents could be recovered, regenerated, and further managed through reuse or safe disposal. The critical analysis of both conventional and emerging adsorbents on organic and inorganic contaminants in wastewater systems are evaluated. The various recovery and regeneration techniques of spent adsorbents including magnetic separation, filtration, thermal desorption and decomposition, chemical desorption, supercritical fluid desorption, advanced oxidation process and microbial assisted adsorbent regeneration are discussed in detail. The current challenges for the recovery and regeneration of adsorbents and the methodologies used for solving those problems are covered. The spent adsorbents are managed through regeneration for reuse (such as soil amendment, capacitor, catalyst/catalyst support) or safe disposal involving incineration and landfilling. Sustainable management of spent adsorbents, including processes involved in the recovery and regeneration of adsorbents for reuse, is examined in the context of resource recovery and circular economy. Finally, the review ends with the current drawbacks in the recovery and management of the spent adsorbents and the future directions for the economic and environmental feasibility of the system for industrial-scale application.

Material Optimization Engineering toward xLiFePO4·yLi3V2(PO4)3 Composites in Application-Oriented Li-Ion Batteries

The development of LiFePO4 (LFP) in high-power energy storage devices is hampered by its slow Li-ion diffusion kinetics. Constructing the composite electrode materials with vanadium substitution is a scientific endeavor to boost LFP's power capacity. Herein, a series of xLiFePO4·yLi3V2(PO4)3 (xLFP·yLVP) composites were fabricated using a simple spray-drying approach. We propose that 5LFP·LVP is the optimal choice for Li-ion battery promotion, owning to its excellent Li-ion storage capacity (material energy density of 413.6 W·h·kg-1), strong machining capability (compacted density of 1.82 g·cm-3) and lower raw material cost consumption. Furthermore, the 5LFP·LVP||LTO Li-ion pouch cell also presents prominent energy storage capability. After 300 cycles of a constant current test at 400 mA, 75% of the initial capacity (379.1 mA·h) is achieved, with around 100% of Coulombic efficiency. A capacity retention of 60.3% is displayed for the 300th cycle when discharging at 1200 mA, with the capacity fading by 0.15% per cycle. This prototype provides a valid and scientific attempt to accelerate the development of xLFP·yLVP composites in application-oriented Li-ion batteries.

Green syntheses of graphene and its applications in internet of things (IoT)-a status review

Internet of Things (IoT) is a trending technological field that converts any physical object into a communicable smarter one by converging the physical world with the digital world. This innovative technology connects the device to the internet and provides a platform to collect real-time data, cloud storage, and analyze the collected data to trigger smart actions from a remote location via remote notifications, etc. Because of its wide-ranging applications, this technology can be integrated into almost all the industries. Another trending field with tremendous opportunities is Nanotechnology, which provides many benefits in several areas of life, and helps to improve many technological and industrial sectors. So, integration of IoT and Nanotechnology can bring about the very important field of Internet of Nanothings (IoNT), which can re-shape the communication industry. For that, data (collected from trillions of nanosensors, connected to billions of devices) would be the 'ultimate truth', which could be generated from highly efficient nanosensors, fabricated from various novel nanomaterials, one of which is graphene, the so-called 'wonder material' of the 21st century. Therefore, graphene-assisted IoT/IoNT platforms may revolutionize the communication technologies around the globe. In this article, a status review of the smart applications of graphene in the IoT sector is presented. Firstly, various green synthesis of graphene for sustainable development is elucidated, followed by its applications in various nanosensors, detectors, actuators, memory, and nano-communication devices. Also, the future market prospects are discussed to converge various emerging concepts like machine learning, fog/edge computing, artificial intelligence, big data, and blockchain, with the graphene-assisted IoT field to bring about the concept of 'all-round connectivity in every sphere possible'.

Visible-Light-Promoted Iridium(III)-Catalyzed Acceptorless Dehydrogenation of N-Heterocycles at Room Temperature

An effective visible-light-promoted iridium(III)-catalyzed hydrogen production from N-heterocycles is described. A single iridium complex constitutes the photocatalytic system playing a dual task, harvesting visible-light and facilitating C–H cleavage and H₂ formation at room temperature and without additives. The presence of a chelating C–N ligand combining a mesoionic carbene ligand along with an amido functionality in the Ir^III complex is essential to attain the photocatalytic transformation. Furthermore, the Ir^III complex is also an efficient catalyst for the thermal reverse process under mild conditions, positioning itself as a proficient candidate for liquid organic hydrogen carrier technologies (LOHCs). Mechanistic studies support a light-induced formation of H₂ from the Ir–H intermediate as the operating mode of the iridium complex.

Microscopic Model for Cyclic Voltammetry of Porous Electrodes

Cyclic voltammetry (CV) is a widespread experimental technique for characterizing electrochemical devices such as supercapacitors. Despite its wide use, a quantitative relation between CV and microscopic properties of supercapacitors is still lacking. In this Letter, we use both the microscopic "stack-electrode" model and its equivalent circuit for predicting the cyclic voltammetry of electric double-layer formation in porous electrodes. We find that the dimensionless combination ωτ_{n}, with ω the scan frequency of the time-dependent potential and τ_{n} the relaxation timescale of the stack-electrode model, governs the CV curves and capacitance: the capacitance is scan-rate independent for ωτ_{n}≪1 and scan-rate dependent for ωτ_{n}≫1. With a single fit parameter and all other model parameters dictated by experiments, our model reproduces experimental CV curves over a wide range of ω. Meanwhile, the influence of the pore size distribution on the charging dynamics is investigated to explain the experimental data.

Current Perspectives on Synthetic Compartments for Biomedical Applications

Nano- and micrometer-sized compartments composed of synthetic polymers are designed to mimic spatial and temporal divisions found in nature. Self-assembly of polymers into compartments such as polymersomes, giant unilamellar vesicles (GUVs), layer-by-layer (LbL) capsules, capsosomes, or polyion complex vesicles (PICsomes) allows for the separation of defined environments from the exterior. These compartments can be further engineered through the incorporation of (bio)molecules within the lumen or into the membrane, while the membrane can be decorated with functional moieties to produce catalytic compartments with defined structures and functions. Nanometer-sized compartments are used for imaging, theranostic, and therapeutic applications as a more mechanically stable alternative to liposomes, and through the encapsulation of catalytic molecules, i.e., enzymes, catalytic compartments can localize and act in vivo. On the micrometer scale, such biohybrid systems are used to encapsulate model proteins and form multicompartmentalized structures through the combination of multiple compartments, reaching closer to the creation of artificial organelles and cells. Significant progress in therapeutic applications and modeling strategies has been achieved through both the creation of polymers with tailored properties and functionalizations and novel techniques for their assembly.

Comparative Analyses of Medicinal Chemistry and Cheminformatics Filters with Accessible Implementation in Konstanz Information Miner (KNIME)

High-throughput virtual screening (HTVS) is, in conjunction with rapid advances in computer hardware, becoming a staple in drug design research campaigns and cheminformatics. In this context, virtual compound library design becomes crucial as it generally constitutes the first step where quality filtered databases are essential for the efficient downstream research. Therefore, multiple filters for compound library design were devised and reported in the scientific literature. We collected the most common filters in medicinal chemistry (PAINS, REOS, Aggregators, van de Waterbeemd, Oprea, Fichert, Ghose, Mozzicconacci, Muegge, Egan, Murcko, Veber, Ro3, Ro4, and Ro5) to facilitate their open access use and compared them. Then, we implemented these filters in the open platform Konstanz Information Miner (KNIME) as a freely accessible and simple workflow compatible with small or large compound databases for the benefit of the readers and for the help in the early drug design steps.

Computational comparison of Ru(bda)(py)2 and Fe(bda)(py)2 as water oxidation catalysts

Ru(bda)(py)₂ (bda = 2,2'-bipyridine-6,6'-dicarboxylate, py = pyridine) has been a significant milestone in the development of water oxidation catalysts. Inspired by Ru(bda)(py)₂ and aiming to reduce the use of noble metals, iron (Fe) was introduced to replace the Ru catalytic center in Ru(bda)(py)₂. In this study, density functional theory (DFT) calculations were performed on Fe- and Ru(bda)(py)₂ catalysts, and a more stable 6-coordinate Fe(bda)(py)₂ with one carboxylate group of bda disconnecting with Fe was found. For the first time, theoretical comparisons have been conducted on these three catalysts to compare their catalytic performances, such as reduction potentials and energy profiles of the radical coupling process. Explanations for the high potential of [Fe^III(bda)(py)₂-H₂O]⁺ and reactivity of [Fe^V(bda)(py)₂-O]⁺ have been provided. This study can provide insights on Fe(bda)(py)₂ from a computational perspective if it is utilized as a water oxidation catalyst.

Thermochemical conversion of heavy metal contaminated biomass: Fate of the metals and their impact on products

With the rapid depletion of fossil energy and increasingly severe environmental pollution, the development of biomass resources for biorefineries has become a new research focus. However, heavy metals may be released during the thermochemical treatment when the biomass materials used in biomass conversion are contaminated by heavy metals. This can cause secondary environmental pollution or transference to the target products, reducing product quality. Therefore, having a systematic understanding of the fate of heavy metals in biomass conversion is necessary for alleviating potential risks. This study presents the current status of contaminated biomass and conversion products involving thermochemical processes, the migration, transformation, and impact of heavy metals in biomass conversion was investigated, and the utilization of heavy metals in contaminated biomass was briefly outlined. This review aims to link biomass conversion to the fate of heavy metals, avoid existing risks as much as possible to produce cleaner products efficiently, and promote the sustainable development of heavy metal contaminated biomass resources.

Efficient capture of circulating tumor cells with low molecular weight folate receptor-specific ligands

Retrieval of circulating tumor cells (CTC) has proven valuable for assessing a patient's cancer burden, evaluating response to therapy, and analyzing which drug might treat a cancer best. Although most isolation methods retrieve CTCs based on size, shape, or capture by tumor-specific antibodies, we explore here the use of small molecule tumor-specific ligands linked to magnetic beads for CTC capture. We have designed folic acid-biotin conjugates with different linkers for the capture of folate receptor (FR) + tumor cells spiked into whole blood, and application of the same technology to isolate FR + CTCs from the peripheral blood of both tumor-bearing mice and non-small cell lung patients. We demonstrate that folic acid linked via a rigid linker to a flexible PEG spacer that is in turn tethered to a magnetic bead enables optimal CTC retrieval, reaching nearly 100% capture when 100 cancer cells are spiked into 1 mL of aqueous buffer and ~ 90% capture when the same quantity of cells is diluted into whole blood. In a live animal model, the same methodology is shown to efficiently retrieve CTCs from tumor-bearing mice, yielding cancer cell counts that are proportional to total tumor burden. More importantly, the same method is shown to collect ~ 29 CTCs/8 mL peripheral blood from patients with non-small cell lung cancer. Since the ligand-presentation strategy optimized here should also prove useful in targeting other nanoparticles to other cells, the methods described below should have general applicability in the design of nanoparticles for cell-specific targeting.

Preparation of High Mechanical Strength Chitosan Nanofiber/NanoSiO2/PVA Composite Scaffolds for Bone Tissue Engineering Using Sol-Gel Method

The majority of chitosan-based bone tissue engineering (BTE) scaffolds have the problem of poor mechanical properties. However, modifying chitosan with conventional silane coupling agents to improve the mechanical properties of scaffolds will introduce additional complications, including cytotoxicity and poor biocompatibility. In this study, two types of organic−inorganic composite scaffolds (F-A-T0/T3/T5 and F-B-T5-P0/P0.5/P1.5/P2.5) were prepared using chitosan nanofibers (CSNF) prepared by the beating-homogenization method, combined with the sol−gel method, and further introduced polyvinyl alcohol (PVA). The F-A-T3 and F-B-T5-P1.5 exhibited interconnected pore and surface nanofibers structures, high porosity (>70%), outstanding swelling properties, and a controllable degradation rate. The Young’s modulus of TEOS: 5.0% (w/w), PVA: 1.5% (w/w) chitosan fiber scaffold is 8.53 ± 0.43 MPa in dry conditions, and 237.78 ± 8.86 kPa in wet conditions, which is four times that of F-A-T5 and twice that of F-B-T5-P0. Additionally, cell (MC3T3-E1) experiments confirmed that the two composite scaffolds had great cytocompatibility and were predicted to be used in the future in the field of BTE scaffolds.

Chelation-activated ultralong room-temperature phosphorescence and thermo-/excitation-dependent persistent luminescence

Multidentate chelation effect can be used to activate the ultralong room-temperature phosphorescence and stabilize the triplet excitons. The as-synthesized cadmium(II) based complexes further exhibit thermo- and excitation-dependent persistent luminescence as potential for optical logic gate.

Calixarene-mediated host-guest interactions leading to supramolecular assemblies: visualization by microscopy

Host-guest chemistry, particularly of supramolecules, has been an intriguing topic for researchers for a long time due to its multiplicative applications ranging from chemical to biological to materials science. Supramolecules, such as calixarenes, are excellent host molecular systems due to their controllable cavity along with the ease of functionalization both at the lower and upper rims. The host-guest interactions involving calixarenes have been primarily studied using physical methods, such as absorption, fluorescence and nuclear magnetic resonance spectroscopy, isothermal titration calorimetry and mass spectrometry. The corresponding literature as disseminated through review articles triggered broadening of the spectrum of research. Depending upon the nature of the derivatization, the supramolecular conjugates of calixarenes have been shown to form different morphologies of micro and nanometric size as reported in the literature. Pertinent research performed in our own group was based on atomic force microscopy, transmission electron microscopy and scanning electron microscopy studies. The literature reveals that such morphologies are modified in the presence of guest species. Thus, the supramolecular host-guest complexation of calixarenes leading to the formation of various architectures has been studied using both spectroscopy and microscopy techniques to obtain complimentary data. However, there are no review articles that provide discussions on this exciting area of supramolecular science involving microscopy. Therefore, in the present article, for the first time, we have brought together the research reported in the literature during the past decade, including ours, in demonstrating the supramolecular architectures formed from the host-guest interactions extended by the conjugates of calixarenes, and their applications using microscopy. The scope of this article spans across various features of interaction in these systems: (i) in solution, (ii) at the air-water interface and (iii) on solid surfaces. The application domain includes sensing of organic explosives and drugs, exhibiting antibacterial activity, supramolecular self-assembly or co-assembly resulting in gels, micelles and vesicles, and the consequent aggregation-induced emission and a few others.

Comparative Study of Sample Carriers for the Identification of Volatile Compounds in Biological Fluids Using Raman Spectroscopy

Vibrational spectroscopic techniques and especially Raman spectroscopy are gaining ground in substituting the officially established chromatographic methods in the identification of ethanol and other volatile substances in body fluids, such as blood, urine, saliva, semen, and vaginal fluids. Although a couple of different carriers and substrates have been employed for the biochemical analysis of these samples, most of them are suffering from important weaknesses as far as the analysis of volatile compounds is concerned. For this reason, in this study three carriers are proposed, and the respective sample preparation methods are described for the determination of ethanol in human urine samples. More specifically, a droplet of the sample on a highly reflective carrier of gold layer, a commercially available cuvette with a mirror to enhance backscattered radiation sealed with a lid, and a home designed microscope slide with a cavity coated with gold layer and covered with transparent cling film have been evaluated. Among the three proposed carriers, the last one achieved a quick, simple, and inexpensive identification of ethanol, which was used as a case study for the volatile compound, in the biological samples. The limit of detection (LoD) was found to be 1.00 μL/mL, while at the same time evaporation of ethanol was prevented.

Photochemical organocatalytic enantioselective radical γ-functionalization of α-branched enals

Reported herein is a rare example of asymmetric catalytic functionalisation of enals at the remote γ-position, proceeding via a radical path. The process requires visible light and exploits the synergistic actions of two distinct organocatalysts. A nucleophilic organic catalyst generates radicals upon S_N2-based activation of commercially available alkyl halides and blue light irradiation. Concomitantly, a chiral secondary amine catalyst triggers the formation of a dienamine from α-branched enals. This chiral dienamine intercepts the photogenerated radicals with excellent γ-selectivity and good stereocontrol.

The Shape of Nanostructures Encodes Immunomodulation of Carbohydrate Antigen and Vaccine Development

Gold nanoparticles (AuNPs) have shown remarkable potential for vaccine development, but the influence of the size and shape of nanoparticles modulating the T-cell-dependent carbohydrate antigen processing and immunomodulation is poorly investigated. Here, we described how different shapes and sizes of gold nanostructures carrying adjuvant modulate carbohydrate-based antigen processing in murine dendritic cells (mDCs) and subsequent T-cell activation produce a robust antibody response. As a prototype, CpG-adjuvant-coated spherical and rod- and star-shaped AuNPs were conjugated to the tripodal Tn-glycopeptide antigen to study their DC uptake and activation of T-cells in a DCs/T-cell co-culture assay. Our results showed that the spherical and star-shaped AuNPs displayed relatively weak receptor-mediated uptake and endosomal sequestration; however, they induced a high level of T helper-1 (Th1) biasing immune responses compared with rod-shaped AuNPs. Furthermore, the in vivo administration of AuNPs showed that the small spherical and star-shaped AuNPs induced an effective anti-Tn-glycopeptide immunoglobulin (IgG) antibody response compared with rod-shaped AuNPs. These results indicated that one could obtain superior carbohydrate vaccines by varying the shape and size parameters of nanostructures.

Directed evolution of nonheme iron enzymes to access abiological radical-relay C(sp3)-H azidation

We report the reprogramming of nonheme iron enzymes to catalyze an abiological C(sp³)‒H azidation reaction through iron-catalyzed radical relay. This biocatalytic transformation uses amidyl radicals as hydrogen atom abstractors and Fe(III)‒N₃ intermediates as radical trapping agents. We established a high-throughput screening platform based on click chemistry for rapid evolution of the catalytic performance of identified enzymes. The final optimized variants deliver a range of azidation products with up to 10,600 total turnovers and 93% enantiomeric excess. Given the prevalence of radical relay reactions in organic synthesis and the diversity of nonheme iron enzymes, we envision that this discovery will stimulate future development of metalloenzyme catalysts for synthetically useful transformations unexplored by natural evolution.

Shape-Dependent Performance of Cu/Cu2 O for Photocatalytic Reduction of CO2

The photocatalytic conversion of CO₂ into solar fuels or chemicals is a sustainable approach to relieve the immediate problems related to global warming and the energy crisis. This study concerns the effects of morphological control on a Cu/Cu₂ O-based photocatalyst for CO₂ reduction. The as-synthesized spherical Cu/Cu₂ O photocatalyst exhibits higher activity than the octahedral one under visible light irradiation. The difference in photocatalytic performance between these two catalysts could be attributed to the following two factors: (1) The multifaceted structure of spherical Cu/Cu₂ O favors charge separation; (2) octahedral Cu/Cu₂ O only contains more positively charged (111) facets, which are unfavorable for CO₂ photoreduction. The results further highlight the importance of utilizing crystal facet engineering to further improve the performance of CO₂ reduction photocatalysts.

Diamond Supercapacitors: Towards Durable, Safe, and Biocompatible Aqueous-Based Energy Storage

Durable and safe energy storage is required for the next generation of miniature bioelectronic devices, in which aqueous electrolytes are preferred due to the advantages in safety, low cost, and high conductivity. While rechargeable aqueous batteries are among the primary choices with relatively low power requirements, their lifetime is generally limited to a few thousand charging/discharging cycles as the electrode material can degrade due to electrochemical reactions. Electrical double layer capacitors (EDLCs) possess increased cycling stability and power density, although with as-yet lower energy density, due to quick electrical adsorption and desorption of ions without involving chemical reactions. However, in aqueous solution, chemical reactions which cause electrode degradation and produce hazardous species can occur when the voltage is increased beyond its operation window to improve the energy density. Diamond is a durable and biocompatible electrode material for supercapacitors, while at the same time provides a larger voltage window in biological environments. For applications requiring higher energy density, diamond-based pseudocapacitors (PCs) have also been developed, which combine EDLCs with fast electrochemical reactions. Here we inspect the properties of diamond-related materials and discuss their advantages and disadvantages when used as EDLC and PC materials. We argue that further optimization of the diamond surface chemistry and morphology, guided by computational modelling of the interface, can lead to supercapacitors with enhanced performance. We envisage that such diamond-based supercapacitors could be used in a wide range of applications and in particular those requiring high performance in biomedical applications.

Oxygen-Plasma-Induced Hetero-Interface NiFe2O4/NiMoO4 Catalyst for Enhanced Electrochemical Oxygen Evolution

The electrolysis of water to produce hydrogen is an effective method for solving the rapid consumption of fossil fuel resources and the problem of global warming. The key to its success is to design an oxygen evolution reaction (OER) electrocatalyst with efficient conversion and reliable stability. Interface engineering is one of the most effective approaches for adjusting local electronic configurations. Adding other metal elements is also an effective way to enrich active sites and improve catalytic activity. Herein, high-valence iron in a heterogeneous interface of NiFe2O4/NiMoO4 composite was obtained through oxygen plasma to achieve excellent electrocatalytic activity and stability. In particular, 270 mV of overpotential is required to reach a current density of 50 mA cm-2, and the overpotential required to reach 500 mA cm-2 is only 309 mV. The electron transfer effect for high-valence iron was determined by X-ray photoelectron spectroscopy (XPS). The fast and irreversible reconstruction and the true active species in the catalytic process were identified by in situ Raman, ex situ XPS, and ex situ transmission electron microscopy (TEM) measurements. This work provides a feasible design guideline to modify electronic structures, promote a metal to an active oxidation state, and thus develop an electrocatalyst with enhanced OER performance.

Cobalt-Containing Nitrogen-Doped Carbon Materials Derived from Saccharides as Efficient Electrocatalysts for Oxygen Reduction Reaction

The development of non-precious metal electrocatalysts towards oxygen reduction reaction (ORR) is crucial for the commercialisation of polymer electrolyte fuel cells. In this work, cobalt-containing nitrogen-doped porous carbon materials were prepared by a pyrolysis of mixtures of saccharides, cobalt nitrate and dicyandiamide, which acts as a precursor for reactive carbon nitride template and a nitrogen source. The rotating disk electrode (RDE) experiments in 0.1 M KOH solution showed that the glucose-derived material with optimised cobalt content had excellent ORR activity, which was comparable to that of 20 wt % Pt/C catalyst. In addition, the catalyst exhibited high tolerance to methanol, good stability in short-time potential cycling test and low peroxide yield. The materials derived from xylan, xylose and cyclodextrin displayed similar activities, indicating that various saccharides can be used as inexpensive and sustainable precursors to synthesise active catalyst materials for anion exchange membrane fuel cells.

A mesoionic carbene complex of manganese in five oxidation states

Reaction between a carbazole-based mesoionic carbene ligand and manganese(II) iodide results in the formation of a rare air-stable manganese(IV) complex after aerobic workup. Cyclic voltammetry reveals the complex to be stable in five oxidation states. The electronic structure of all five oxidation states is elucidated chemically, spectroscopically (NMR, high-frequency EPR, UV-Vis, MCD), magnetically, and computationally (DFT, CASSCF).

Effects of chlorine particle concentration on the human airway

For COVID-19, chlorine has lately been utilised as a home disinfectant. Given that chlorine is hazardous to the human airway, the current research investigates the effects of chlorine mass fraction and droplet size on the human airway. The effects are investigated at chlorine mass ratios of 2% (24 ppm), 10% (120 ppm), 15% (180 ppm), and 20% (240 ppm), as well as chlorine particle diameters of 10 nm, 20 nm, 30 nm, and 50 nm, and three inhalation rates (15 l/min, 30 l/min, and 60 l/min). The results reveal that when the chlorine mass fraction is 2% and the inhalation rate is low, the chlorine volume fraction decreases. Furthermore, at 2% chlorine and a rapid breathing rate, chlorine particles are accelerated to escape into the lungs.

Endocytosis Pathway Self-Regulation for Precise Image-Guided Therapy through an Enzyme-Responsive Modular Peptide Probe

Before arriving at the intracellular destinations, probes might be trapped in the lysosomes, reducing the amount of cargos, which compromises the therapeutic outcomes. The current methods are based on the fact that probes enter the lysosomes and then escape from them, which do not fundamentally solve the degradation by lysosomal hydrolases. Here, an enzyme-responsive modular peptide probe named PKP that can be divided into two parts, Pal-part and KP-part, by matrix metalloproteinase-2 (MMP-2) overexpressed in tumor microenvironments is designed. Pal-part quickly enters the cells and forms nanofibers in the lysosomes, decreasing protein phosphatase 2A (PP2A), which transforms the endocytic pathway of KP-part from clathrin-mediated endocytosis (CME) into caveolae-mediated endocytosis (CvME) and allows KP-part to directly reach the mitochondria sites without passing through the lysosomes. Finally, through self-regulating intracellular delivery pathways, the mitochondrial delivery efficiency of KP-part is greatly improved, leading to an optimized image-guided therapeutic efficiency. Furthermore, this system also shows great potential for the delivery of siRNA and doxorubicin to achieve precise cancer image-guided therapy, which is expected to significantly expand its application and facilitate the development of personalized therapy.

Cholesterol-induced suppression of Kir2 channels is mediated by decoupling at the inter-subunit interfaces

Cholesterol is a major regulator of multiple types of ion channels. Although there is increasing information about cholesterol binding sites, the molecular mechanisms through which cholesterol binding alters channel function are virtually unknown. In this study, we used a combination of Martini coarse-grained simulations, a network theory-based analysis, and electrophysiology to determine the effect of cholesterol on the dynamic structure of the Kir2.2 channel. We found that increasing membrane cholesterol reduced the likelihood of contact between specific regions of the cytoplasmic and transmembrane domains of the channel, most prominently at the subunit-subunit interfaces of the cytosolic domains. This decrease in contact was mediated by pairwise interactions of specific residues and correlated to the stoichiometry of cholesterol binding events. The predictions of the model were tested by site-directed mutagenesis of two identified residues-V265 and H222-and high throughput electrophysiology.

Understanding the Electric Double-Layer Structure, Capacitance, and Charging Dynamics

Significant progress has been made in recent years in theoretical modeling of the electric double layer (EDL), a key concept in electrochemistry important for energy storage, electrocatalysis, and multitudes of other technological applications. However, major challenges remain in understanding the microscopic details of the electrochemical interface and charging mechanisms under realistic conditions. This review delves into theoretical methods to describe the equilibrium and dynamic responses of the EDL structure and capacitance for electrochemical systems commonly deployed for capacitive energy storage. Special emphasis is given to recent advances that intend to capture the nonclassical EDL behavior such as oscillatory ion distributions, polarization of nonmetallic electrodes, charge transfer, and various forms of phase transitions in the micropores of electrodes interfacing with an organic electrolyte or ionic liquid. This comprehensive analysis highlights theoretical insights into predictable relationships between materials characteristics and electrochemical performance and offers a perspective on opportunities for further development toward rational design and optimization of electrochemical systems.

Electrochemical ammonium-cation-assisted pyridylation of inert N-heterocycles via dual-proton-coupled electron transfer

A straightforward and practical strategy for pyridylation of inert N-heterocycles, enabled by ammonium cation and electrochemical, has been described. This protocol gives access to various N-fused heterocycles and bidentate nitrogen ligand compounds, through dual-proton-coupled electron transfer (PCET) and radical cross-coupling in the absence of exogenous metal and redox reagent. It features broad substrate scope, wide functional group tolerance, and easy gram-scale synthesis. Various experiments and density functional theory (DFT) calculation results show the mechanism of dual PCET followed by radical cross-coupling is the preferred pathway. Moreover, ammonium salt plays the dual role of protonation reagent and electrolyte in this conversion, and the resulting product 9-(pyridin-4-yl)acridine compound can be used for fluorescence recognition of Fe2+ and Pd2+ with high sensitivity.

High-Pressure Polymorphism in Hydrogen-Bonded Crystals: A Concise Review

High-pressure polymorphism is a developing interdisciplinary field. Pressure up to 20 GPa is a powerful thermodynamic parameter for the study and fabrication of hydrogen-bonded polymorphic systems. This review describes how pressure can be used to explore polymorphism and surveys the reports on examples of compounds that our group has studied at high pressures. Such studies have provided insight into the nature of structure–property relationships, which will enable crystal engineering to design crystals with desired architectures through hydrogen-bonded networks. Experimental methods are also briefly surveyed, along with two methods that have proven to be very helpful in the analysis of high-pressure polymorphs, namely, the ab initio pseudopotential plane–wave density functional method and using Hirshfeld surfaces to construct a graphical overview of intermolecular interactions.

Transition Metal Catalysis Controlled by Hydrogen Bonding in the Second Coordination Sphere

Transition metal catalysis is of utmost importance for the development of sustainable processes in academia and industry. The activity and selectivity of metal complexes are typically the result of the interplay between ligand and metal properties. As the ligand can be chemically altered, a large research focus has been on ligand development. More recently, it has been recognized that further control over activity and selectivity can be achieved by using the "second coordination sphere", which can be seen as the region beyond the direct coordination sphere of the metal center. Hydrogen bonds appear to be very useful interactions in this context as they typically have sufficient strength and directionality to exert control of the second coordination sphere, yet hydrogen bonds are typically very dynamic, allowing fast turnover. In this review we have highlighted several key features of hydrogen bonding interactions and have summarized the use of hydrogen bonding to program the second coordination sphere. Such control can be achieved by bridging two ligands that are coordinated to a metal center to effectively lead to supramolecular bidentate ligands. In addition, hydrogen bonding can be used to preorganize a substrate that is coordinated to the metal center. Both strategies lead to catalysts with superior properties in a variety of metal catalyzed transformations, including (asymmetric) hydrogenation, hydroformylation, C-H activation, oxidation, radical-type transformations, and photochemical reactions.

Is atmospheric oxidation capacity better in indicating tropospheric O3 formation?

Tropospheric ozone (O₃) concentration is increasing in China along with dramatic changes in precursor emissions and meteorological conditions, adversely affecting human health and ecosystems. O₃ is formed from the complex nonlinear photochemical reactions from nitrogen oxides (NO _x = NO + NO₂) and volatile organic compounds (VOCs). Although the mechanism of O₃ formation is rather clear, describing and analyzing its changes and formation potential at fine spatial and temporal resolution is still a challenge today. In this study, we briefly summarized and evaluated different approaches that indicate O₃ formation regimes. We identify that atmospheric oxidation capacity (AOC) is a better indicator of photochemical reactions leading to the formation of O₃ and other secondary pollutants. Results show that AOC has a prominent positive relationship to O₃ in the major city clusters in China, with a goodness of fit (R ²) up to 0.6. This outcome provides a novel perspective in characterizing O₃ formation and has significant implications for formulating control strategies of secondary pollutants.