Rapid and ratiometric fluorescent detection of phosgene by a red-emissive ESIPT-based-benzoquinolone probe

Phosgene is a highly toxic gas that poses a serious threat to human health and public safety. Therefore, it is of great importance to develop an available detection method enabling on-the-spot measurement of phosgene. In this paper, we report a novel ESIPT fluorescent probe for phosgene detection based on quinolone fluorophore. This probe exhibits rapid response (in 10 s), stable signal output (last for 10 min), high sensitivity (LOD ∼ 6.7 nM), and distinct emission color change (red to green) towards phosgene. The sensing mechanism was investigated by using ¹H NMR, HRMS and fluorescence lifetime techniques, confirming that the amidation reaction between phosgene and quinolone effectively suppressed the ESIPT process of probe. Eventually, this probe was fabricated into polymer nanofibers by electrospinning and successfully employed to monitor gaseous phosgene with high specificity. This work provided a promising analytical tool for rapid and ratiometric detection of phosgene both in solution and in the gas phase.

A surfactant-assisted approach enables the fluorescence tracking of benfluralin in plants

Developing an effective detection method for benfluralin (BFA) is of great significance, since BFA as most widely used herbicides can be bioaccumulated by aquatic organisms in environment, possessing potential risks to human health. Owing to aggregation-caused quenching effect, most fluorescent detection methods based on donor-acceptor organic fluorophores suffered from very low sensitivity towards BFA in water system, hampering the bioimaging application in plants. In this work, we reported a novel surfactant-assisted fluorescent probe enabling detection of BFA in water with a high sensitivity. The involvement of specific surfactant Triton X100 (TX100) could amplify the response signal of probe more than 100-fold. The detection limit for BFA was determined to be 80 nM, satisfying the environmental protection requirements. Moreover, we demonstrated applications of this strategy for the fluorescent imaging of BFA in plant. The absorbance of BFA into roots of Arabidopsis thaliana and castor seedlings was successfully observed based on this method.

A Paper-Based Photoelectrochemical Sensing Platform Based on In Situ Grown ZnO/ZnIn2S4 Heterojunctions onto Paper Fibers for Sensitively Detecting AFP

Nowadays, developing a cost-effective, easy-to-operate, and efficient signal amplification platform is of important to microfluidic paper-based analytical devices (μPAD) for end-use markets of point-of-care (POC) assay applications. Herein, an ultrasensitive, paper-based photoelectrochemical (PEC) bioassay platform is constructed by in situ grown ZnO/ZnIn2S4 heterojunctions onto paper fibers, which acted as photoactive signal amplification probes for enhancing the sensitivity of antibodies-based diagnostic assays, for the sensitive detection of alpha-fetoprotein (AFP) targets. The crystalline flake-like ZnIn2S4 composited with hexagonal nanorods (NRs) morphology of ZnO is an in situ grown, at the first time, onto cellulose fibers surface supported with Au nanoparticle (Au NP) modification to improve conductivity of the device working zone. The obtained composites on paper fibers are implemented as a flexible paper-based photoelectrode to realize remarkable performance of the fabricated μPAD, resulting from the enhanced PEC activity of heterojunctions with effective electron-hole pair separation for accelerating photoelectric conversion efficiency of the sensing process under light irradiation. Once the target AFP was introduced into the biosensing interface assistant, with a specific recognition interaction of AFP antibody, a drastically photocurrent response was generated, in view of the apparent steric effects. With the concentration increase of AFP targets, more immune conjugates could be confined onto the biosensing interface, eventually leading to the quantitative decrease of photocurrent intensity. Combined with an ingenious origami design and permitting the hydrophobic/hydrophilic conversion procedure in the bioassay process, the ultrasensitive PEC detection of AFP targets was realized. Under the optimized conditions, the level of AFP could be sensitively tracked by the prepared μPAD with a liner range from 0.1 to 100 ng mL-1 and limit of detection of 0.03 ng mL-1. This work provides a great potential application for highly selective and sensitive POC testing of AFP, and finally, developments for clinical disease diagnosis.

Dual-Channel Recognition of Human Serum Albumin and Glutathione by Fluorescent Probes with Site-Dependent Responsive Features

Design of chemical probes with high specificity and responses are particularly intriguing. In this work, a fluorescent probe (M-OH-SO₃) with dual-channel spectral responses toward human serum albumin (HSA) is presented. By employing dinitrobenzenesulfonate as a recognition site as well as a fluorescence quencher, probe M-OH-SO₃ displayed weak fluorescence, which, nevertheless, exhibits extensive yellow (575 nm) and red (660 nm) fluorescence emissions toward HSA under excitations at 400 and 500 nm, respectively. Interestingly, M-OH-SO₃ displayed the best performance toward HSA with distinctly higher selectivity than that of its counterparts M-SO₃, M-H-SO₃, and M-F-SO₃, which were prepared simply by modulating the functional group at the ortho position of the dicyanoisophorone core. Molecular docking results revealed that M-OH-SO₃ possesses the lowest binding energy among the tested derivatives and accordingly the strongest binding affinity. Probe M-OH-SO₃ showed a good linear relationship toward HSA in a range of 0.5-18 μM with a limit of detection of 35 nM. Cell imaging results demonstrated that probe M-OH-SO₃ could visualize the variation HSA levels in hepatocarcinoma cells. In addition, probe M-OH-SO₃ could also be employed for the recognition of glutathione through the cleavage of the dinitrobenzenesulfonate group along with an enhancement of emission at 575 nm. The site-dependent properties inspired a novel paradigm for design of fluorescent probes with optimized selectivity and responses.

Fluorescent turn-on sensing of albumin proteins (BSA and ovalbumin) using vitamin B6 cofactor derived Schiff base

The detection of albumin proteins with high accuracy by facile analytical approaches is important for the diagnosis of various diseases. This manuscript introduced an easy-to-prepare Schiff base L by condensing vitamin B₆ cofactor pyridoxal 5'-phosphate (PLP) with 2-aminothiophenol for the fluorescence turn-on sensing of bovine serum albumin (BSA) and ovalbumin (OVA). The weakly emissive L showed a significant fluorescence enhancement at 485 and 490 nm in the presence of OVA and BSA with an estimated sensitivity limit of 1.7 µM and 0.3 µM, respectively. The formation of protein-ligand complex restricted the free intramolecular rotation of L is expected to show the selective fluorescence enhancement. The molecular docking and molecular dynamics simulations were performed to examine the binding affinity and modes between BSA/OVA and L. The practical utility of L as a fluorescent turn-on sensor was validated by quantifying BSA and OVA in various real biological samples of milk, serum, egg white and urine with good recovery percentages.

Aggregation and Binding-Directed FRET Modulation of Conjugated Polymer Materials for Selective and Point-of-Care Monitoring of Serum Albumins

Nonspecific interactions of conjugated polymers (CPs) with various proteins prove to be a major impediment for researchers when designing a suitable CP-based probe for the amplified and selective recognition of particular proteins in complex body fluids. Herein, a new strategy is presented for the precise and specific monitoring of clinically important serum albumin (SA) proteins at the nanomolar level using fluorescence resonance energy transfer (FRET)-modulated CP-surfactant ensembles as superior sensing materials. In brief, the newly designed color-tunable CP PF-DBT-Im undergoes intense aggregation with the surfactant sodium dodecyl sulfate (SDS), enabling drastic change in the emission color from violet to deep red due to intermolecular FRET. The emission of PF-DBT-Im/SDS ensembles then changed from deep red to magenta specifically on addition of SAs owing to the exclusive reverse FRET facilitated by synergistic effects of electrostatic interactions, hydrophobic forces, and the comparatively high intrinsic quantum yield of SAs. Interestingly, PF-DBT-Im itself could not differentiate SAs from other proteins, demonstrating the superiority of the PF-DBT-Im/SDS self-assembly over PF-DBT-Im. Finally, an affordable smartphone-integrated point-of-care (PoC) device is also fabricated as a proof-of-concept for the on-site and rapid monitoring of SAs, validating the potential of the system in long-term clinical applications.

Research Progress and Future Trends of Microfluidic Paper-Based Analytical Devices in In-Vitro Diagnosis

In vitro diagnosis (IVD) has become a hot topic in laboratory research and achievement transformation. However, due to the high cost, and time-consuming and complex operation of traditional technologies, some new technologies are being introduced into IVD, to solve the existing problems. As a result, IVD has begun to develop toward point-of-care testing (POCT), a subdivision field of IVD. The pandemic has made governments and health institutions realize the urgency of accelerating the development of POCT. Microfluidic paper-based analytical devices (μPADs), a low-cost, high-efficiency, and easy-to-operate detection platform, have played a significant role in advancing the development of IVD. μPADs are composed of paper as the core material, certain unique substances as reagents for processing the paper, and sensing devices, as auxiliary equipment. The published reviews on the same topic lack a comprehensive and systematic introduction to μPAD classification and research progress in IVD segmentation. In this paper, we first briefly introduce the origin of μPADs and their role in promoting IVD, in the introduction section. Then, processing and detection methods for μPADs are summarized, and the innovative achievements of μPADs in IVD are reviewed. Finally, we discuss and prospect the upgrade and improvement directions of μPADs, in terms of portability, sensitivity, and automation, to help researchers clarify the progress and overcome the difficulties in subsequent μPAD research.

General Method for Pesticide Recognition Using Albumin-Based Host-Guest Ensembles

The massive use of pesticides nowadays has led to serious consequences for the environment and public health. Fluorescence analytical methods for pesticides are particularly advantageous with respect to simplicity and portability; however, currently available fluorescence methods (enzyme-based assays and indicator displacement assays) with poor universality are only able to detect few specific pesticides (e.g., organophosphorus). Making use of the multiple flexible and asymmetrical binding sites in albumin, we herein report a set of multicolor albumin-based host-guest ensembles. These ensembles exhibit a universal but distinctive fluorescent response to most of the common pesticides and allow array-based identification of pesticides with high accuracy. Furthermore, the simplicity, portability, and visualization of this method enable on-site determination of pesticides in a practical setting. This albumin host strategy largely expands the toolbox of traditional indicator displacement assays (synthetic macrocycles as hosts), and we expect it to inspire a series of sensor designs for pesticide detection.

A novel ratiometric fluorescence sensor based on lanthanide-functionalized MOF for Hg2+ detection

Post-synthesis modification is an effective strategy for the preparation of rare earth organic framework materials and the derivation of high-performance functional materials. Here, we report the preparation of a dual emission Ln-MOF material (Eu-Ca-MOF) using Ca-MOF as the parent framework and introducing Eu³⁺ ions into its channels through post-synthesis modification. Eu-Ca-MOF has good photoluminescence properties and can be used as a ratiometric fluorescence sensor (I₃₈₁/I₅₉₀) to detect Hg²⁺ ions in water sensitively. The characteristic of Eu-Ca-MOF obtained is that when the material is dispersed in an aqueous solution containing Hg²⁺ ions, the characteristic emission of the ligand at 381 nm is enhanced, while the characteristic emission of Eu³⁺ at 590 nm is quenched. The peak-to-height ratio of the two emissions can be used to achieve highly sensitive detection of Hg²⁺ ions even in the presence of other potentially competing analytes. In addition, Hg²⁺ induces Eu-Ca-MOF to produce a significant ratiometric luminescence response, which changes its luminescence color from red to blue, which is beneficial to visual analysis of naked eyes. At the same time, Eu-Ca-MOF has a wider detection range (0.02-200 μM), and a lower limit detection (2.6 nM) for Hg²⁺ ions. The lanthanide compounds prepared by post-synthetic modification provide an effective synthesis strategy for photoluminescent materials.

Probing the serum albumin binding site of fenamates and photochemical protein labeling with a fluorescent dye

Human serum albumin (HSA) can bind with numerous drugs, leading to a significant influence on drug pharmacokinetics as well as undesirable drug-drug interactions due to competitive binding. Probing the HSA drug binding site thus offers great opportunities to reveal drug-HSA binding profiles. In the present study, a fluorescent probe (E)-4-(2-(5-(4-(diphenylamino)phenyl)thiophen-2-yl)vinyl)-1-propylpyridin-1-ium (TTPy) has been prepared, which exhibits enhancement of deep-red to near-infrared (NIR) fluorescence upon HSA binding. The competitive binding assay indicated that TTPy can target the HSA binding site of fenamates, a group of non-steroidal anti-inflammatory drugs (NSAIDs), with moderate binding affinity (1.95 × 10⁶ M^-1 at 303 K). More interestingly, TTPy enables fluorescent labeling of HSA upon visible light irradiation. This study provides promising ways for HSA drug binding site identification and photochemical protein labeling.

Rationally designed far-red emitting styryl chromones and a magnetic nanoconjugate for strip-based 'on-site' detection of metabolic markers

The global burden of liver damage and renal failure necessitates technology-aided evolution towards point-of-care (POC) testing of metabolic markers. Hence in the prevalence of current health conditions, achieving on-site detection and quantifying serum albumin (SA) can contribute significantly to halting the increased mortality and morbidity rate. Herein, we have rationally designed and synthesized far-red emitting, solvatofluorochromic styryl chromone (SC) derivatives SC1 and SC2, and SC2-conjugated fluorescent magnetic nanoparticles (SCNPs) for sensing SA with a fluorogenic response via interacting at an atypical drug binding site. In solution, the highly sensitive and selective fluorogenic response was evaluated by the prominent amplification and blue-shift in the emission maxima of the probes from deep red to dark yellow through an intermediate orange emission. The transformation of the fluorogen into a fluorophore was manifested through spectroscopic measurements. The stabilization of the probes at protein pockets was ascribed to the non-covalent interactions, such as H-bonding, cation-π, and hydrophobic interactions, as unveiled by docking studies. The practical applications revealed the novelty of SC derivatives through (a) the capability to detect SA isolated from real blood samples via a turn-on fluorescence response; (b) the design of a simple, cheap, and portable test-strip using a glass-slide loaded with solid-state emissive SC2, which provided differential emission color of the SC2-HSA complex in solution and the solid-state with increasing concentration of HSA. Moreover, a smartphone-based color analysis application was employed to obtain the ratio of green and red (G/R) channels, which was utilized for quantitative detection of HSA; (c) the biocompatibility of the SC1 was ascertained through confocal laser scanning microscopic imaging (CLSM). Detailed investigation showed that SC1 could entirely localize in the mitochondria and evolve as a promising biomarker for distinguishing cancer cells from normal cells. Additionally, the validation of uncommon binding of SC1 and SC2 between domains I and III was determined using competition experiments with a known site-specific binder and molecular docking studies. This unique property of the probes can be further exploited to understand the cellular intake of HSA-drug complexes in the multifaceted biological system. These results find the utility of SC derivatives as small molecule-based chemosensors for at-home SA detection and as a biomarker for cancer.

A near-infrared dicyanoisophorone-based fluorescent probe for discriminating HSA from BSA

Despite the rapid development of fluorescent probe techniques for the detection of human serum albumin (HSA), a probe that discriminates between HSA and bovine serum albumin (BSA) is still a challenging task, since their similar chemical structures. As a continuation of our work, herein, a dicyanoisophorone-based fluorescent probe DCO2 is systematically studied for discrimination of HSA from BSA. The photophysical and sensing performances of DCO2, including basic spectroscopic properties, sensing sensitivity, and selectivity, exhibits that DCO2 could selectively bind with HSA and display remarkable fluorescence enhancement (∼254-fold) at 685 nm. The gap of the fluorescent response of DCO2 between HSA and BSA is an obvious increase from 21% to 73% compared to the previous probe DCO1. The sensing mechanism was elucidated by Job's plot, displacement experiment, and molecular docking, suggesting that the specific response to HSA originated from the rigid donor structure and steric hindrance. DCO2 could be buried in the DS1 pocket of HSA, and only partly wedged into the DS1 pocket of BSA with exposing twisted N,N-diethylamino group outside. Application studies indicated that DCO2 has well detective behavior for HSA in the biological fluids. This work could provide a new approach to design HSA-specific near-infrared fluorescence probes.

A curcumin-based AIEE-active fluorescent probe for Cu2+ detection in aqueous solution

Curcuminoids have been extensively investigated as metal ion probes, but the intrinsic aggregation-caused-quenching (ACQ) characteristic of curcumin would hinder their applications in aqueous solution. Fortunately, tetraphenylethylene (TPE) could endow the compounds with aggregation-induced emission (AIE)/aggregation-induced enhanced emission (AIEE) characteristics to eliminate the ACQ effect. According to this strategy, a series of TPE-modified curcumin derivatives L1–4 were prepared and studied for their AIEE properties. Among the four TPE-curcumin analogues, only L1 particles have been successfully used as an on-off fluorescence probe for detecting Cu²⁺ in aqueous solution. The fluorescence titration experiment determined its detection limit of 1.49 × 10⁻⁷ mol L⁻¹, and the binding ratio between L1 and Cu²⁺ was estimated as 2 : 1, which was in agreement with the results of high resolution mass spectrum and Job's plot. In addition, the binding constant was evaluated as 6.77 × 10² M⁻¹ using a Benesi–Hildebrand plot. Finally, the obtained L1-based indicator paper showed significant fluorescence response to Cu²⁺ aqueous solution. This TPE-modified strategy improves the detection capability of curcumin probe in aqueous solution and provides a feasible way to obtain other probes with ACQ characteristics.

A curcumin-based AIEE-active L1 was synthesized and used to prepare an on-off fluorescent probe for Cu²⁺ detection in aqueous solution.

A Ratiometric Fluorescence Probe for Selective Detection of ex vivo Methylglyoxal in Diabetic Mice

Accurate monitoring of methylglyoxal (MGO) at cell and living level was crucial to reveal its role in the pathogenesis of diabetes since MGO was closely related to diabetes. Herein, a ratiometric fluorescence strategy was constructed based on the capture probe 2,3-diaminonaphthalene (DAN) for the specific detection of MGO. Compared to the fluorescent probes with a single emission wavelength, the ratiometric mode by monitoring two emissions can effectively avoid the interference from the biological background, and provided additional self-calibration ability, which can realize accurate detection of MGO. The proposed method showed a good linear relationship in the range of 0-75 μm for MGO detection, and the limit of detection was 0.33 μm. DAN responded to MGO with good specificity and was successfully applied for detecting the ex vivo MGO level in plasma of KK-Ay mice as a type II diabetes model. Besides, the prepared DAN test strip can be visualized for rapid semi-quantitative analysis of MGO using the naked eye. Furthermore, human skin fibroblasts and HeLa cells were utilized for exogenous MGO imaging, and ex vivo MGO imaging was performed on tissues of KK-Ay mice. All results indicated that the DAN-based ratiometric fluorescence probe can be used as a potential method to detect the level of MGO, thus enabling indications for the occurrence of diabetes and its complications.

A Colorimetric Ag+ Probe for Food Real-Time Visual Monitoring

Monitoring food quality throughout the food supply chain is critical to ensuring global food safety and minimizing food losses. Here we find that simply by mixing an aqueous solution of sugar-stabilized Ag+ and amines in an open vessel leads to the generation of Ag NPs and an intelligent evaluation system based on a colorimetric Ag+ probe is developed for real-time visual monitoring of food freshness. The self-assembly reaction between methylamine (MA) generated during meat storage and the colorimetric Ag+ probe produces different color changes that indicate changes in the quality of the meat. The colorimetric Ag+ probe was integrated into food packaging systems for real-time monitoring of chilled broiler meat freshness. The proposed evaluation system provides a versatile approach for detecting biogenic amines and monitoring chilled broiler meat freshness and it has the advantages of high selectivity, real-time and on-site measurements, sensitivity, economy, and safety and holds great public health significance.

Phase transfer of fatty acids into ultrasmall nanospheres for colorimetric detection of lipase and albumin

Colorimetric detection of fatty acids during biological interactions is extremely difficult since they are optically silent. Here, fatty acids are found to function as ion-exchangers in ultrasmall polymeric nanospheres to facilitate the protonation of chromoionophores, causing a vivid color change between red and blue. With an excellent detection limit of 1.8 μg mL^-1 for oleic acid, colorimetric assays for lipase and albumin are developed with quick response, high sensitivity, and low cost.

SERS-based CRISPR/Cas assay on microfluidic paper analytical devices for supersensitive detection of pathogenic bacteria in foods

Rapid and point-of-need (PON) detection of bacteria is crucial to directly provide rapid and reliable diagnostics information during on-site tests, allowing more room for taking proactive measures. By taking the multifaceted advantages of CRISPR/Cas12a and surface-enhanced Raman scattering (SERS), for the first time, we designed a recombinase polymerase amplification (RPA)-integrated microfluidic paper-based analytical device (μPAD), coined RPA-Cas12a-μPAD for supersensitive SERS detection. Single-stranded DNAs were designed to "pull down" SERS nanoprobes. The amplicons of the invA gene triggered the trans-cleavage of Cas12a, resulting in the indiscriminate shredding of linker ssDNA. Thus, the degree of aggregation of SERS nanoprobes was dependent on the concentration of Salmonella typhimurium (S. typhi), which was determined on a μPAD and monitored by a Raman spectrometer. The limit of detection for S. typhi was approximately 3-4 CFU/mL for spiked milk and meat samples with a dynamic detection range from 1 to 10⁸ CFU/mL. The RPA-Cas12a-μPAD secured accurate tests for food samples in 45 min. This work expands the reach of CRISPR-based diagnostics (CRISPR-Dx) and provides a novel and robust bacterial PON detection platform.

Emerging biosensing and transducing techniques for potential applications in point-of-care diagnostics

With the deepening of our understanding in life science, molecular biology, nanotechnology, optics, electrochemistry and other areas, an increasing number of biosensor design strategies have emerged in recent years, capable of providing potential practical applications for point-of-care (POC) diagnosis in various human diseases. Compared to conventional biosensors, the latest POC biosensor research aims at improving sensor precision, cost-effectiveness and time-consumption, as well as the development of versatile detection strategies to achieve multiplexed analyte detection in a single device and enable rapid diagnosis and high-throughput screening. In this review, various intriguing strategies in the recognition and transduction of POC (from 2018 to 2021) are described in light of recent advances in CRISPR technology, electrochemical biosensing, and optical- or spectra-based biosensing. From the perspective of promoting emerging bioanalytical tools into practical POC detecting and diagnostic applications, we have summarized key advances made in this field in recent years and presented our own perspectives on future POC development and challenges.

Paper-Based Flow Sensor for the Detection of Hyaluronidase via an Enzyme Hydrolysis-Induced Viscosity Change in a Polymer Solution

Hyaluronidase (HAase) is implicated in inflammation, cancer development, and allergic reaction. The detection of HAase is significantly important in clinical diagnosis and medical treatment. Herein, we propose a new principle for the development of equipment-free and label-free paper-based flow sensors based on the enzymatic hydrolysis-induced viscosity change in a stimuli-responsive polymer solution, which increases the water flow distance on the pH indicator paper. The detection of HAase is demonstrated as an example. This facile and versatile method can overcome the potential drawbacks of traditional hydrogel-based sensors, including complex preparation steps, slow response time, or low sensitivity. Moreover, it can also avoid the use of specialized instruments, labeled molecules, or functionalized nanoparticles in the sensors developed using the polymer solutions. Using this strategy, the detection of HAase is achieved with a limit of detection as low as 0.2 U/mL. Also, it works well in human urine. Additionally, the detection of tannic acid, which is an inhibitor of HAase, is also fulfilled. Overall, a simple, efficient, high-throughput, and low-cost detection method is developed for the rapid and quantitative detection of HAase and its inhibitor without the use of labeled molecules, synthetic particles, and specialized instruments. As only minimal reagents of HAase, HA, and paper are used, it is very promising in the development of commercial kits for point-of-care testing.

Modulating donor of dicyanoisophorone-based fluorophores to detect human serum albumin with NIR fluorescence

It is urgently needed to develop NIR-fluorescent probe for detection of human serum albumin (HSA) since the interference of short-wavelength-fluorescence from endogenous species in real serum and urine. However, most previous reports were located in the short-wavelength region (<600 nm). In this work, a series of dicyanoisophorone (DCO)-based fluorophores 1-4 with different donor groups have been designed and investigated. A systematic study of their photophysical properties has been carried out. Among these probes, 4 exhibited NIR emission with the highest fluorescence brightness and the most sensitive signal response to HSA. Further studies demonstrated that 4 could strongly bind into the DS1 pocket of HSA with a 1:1 ratio. Importantly, the method based on 4 has been proven to be capable of sensing HSA in real serum and urine samples.

Rationally designed Tröger's base decorated bis-carbazoles as twisted solid-state emitting materials and dead bacterial cell imaging

Troger's base decorated bis-carbazoles were investigated as solid-state emitting materials for dead bacterial staining agents to assess bacterial cell death based on fluorescence.

HSA-Lys-161 covalent bound fluorescent dye for in vivo blood drug dynamic imaging and tumor mapping

The specific combination of human serum albumin and fluorescent dye will endow superior performance to a coupled fluorescent platform for in vivo fluorescence labeling. In this study, we found that lysine-161 in human serum albumin is a covalent binding site and could spontaneously bind a ketone skeleton quinoxaline-coumarin fluorescent dye with a specific turn-on fluorescence signal for the first time. Supported by the abundant drug binding domains in human serum albumin, drugs such as ibuprofen, warfarin and clopidogrel could interact with the fluorescent dye labeled human serum albumin to feature a substantial enhancement in fluorescence intensity (6.6-fold for ibuprofen, 4.5-fold for warfarin and 5-fold for clopidogrel). The drug concentration dependent fluorescence intensity amplification realized real-time, in situ blood drug concentration monitoring in mice, utilizing ibuprofen as a model drug. The non-invasive method avoided continuous blood sample collection, which fundamentally causes suffering and consumption of experimental animals in the study of pharmacokinetics. At the same time, the coupled fluorescent probe can be efficiently enriched in tumors in mice which could map a tumor with a high-contrast red fluorescence signal and could hold great potential in clinical tumor marking and surgical resection.

A fluorescent sensor recognized by the FA1 site for highly sensitive detection of HSA

Human serum albumin (HSA), as the most abundant protein in blood plasma, plays a crucial role in many physiological processes. The abnormal HSA level in serum or in urine is often associated with various diseases. Therefore, to achieve highly sensitive and selective quantification of HSA is of great importance for disease diagnosis and preventive medicine. Herein, an HSA-selective light-up fluorescent sensor, DCM-ML, was successfully developed for quantitative detection of HSA. DCM-ML exhibited good (photo-) stability and strong fluorescence enhancement around 630 nm in the presence of HSA in complex samples containing numerous biological analytes. Upon addition of HSA into DCM-ML containing solution, a good linear relationship (R² > 0.99) between the fluorescence intensity of DCM-ML and HSA concentration from 0 to 0.08 mg/mL was obtained with the detection limit of 0.25 μg/mL. The sensing mechanism of the sensor towards HSA was demonstrated to be via recognition in the fatty acid site 1 (FA1), instead of the most reported binding sites (Sudlow I and II) in HSA, for the first time, by both the displacement experiments and molecular docking simulation. Thus, DCM-ML can also be assumed as a potential FA1 site-binding marker for examining drugs binding to the FA1 site in HSA. At last, the utilization of sensor DCM-ML for quantification and validation of HSA in urine samples and cell culture medium was effectively demonstrated. Therefore, the development of DCM-ML should find great application potentials in the fields of analytical chemistry and clinical medicine as a highly sensitive HSA sensor.

Ratiometric Detection of microRNA Using Hybridization Chain Reaction and Fluorogenic Silver Nanoclusters

miRNA (miR)-155 is a potential biomarker for breast cancers. We aimed at developing a nanosensor for miR-155 detection by integrating hybridization chain reaction (HCR) and silver nanoclusters (AgNCs). HCR serves as an enzyme-free and isothermal amplification method, whereas AgNCs provide a built-in fluorogenic detection probe that could simplify the downstream analysis. The two components were integrated by adding a nucleation sequence of AgNCs to the hairpin of HCR. The working principle was based on the influence of microenvironment towards the hosted AgNCs, whereby unfolding of hairpin upon HCR has manipulated the distance between the hosted AgNCs and cytosine-rich toehold region of hairpin. As such, the dominant emission of AgNCs changed from red to yellow in the absence and presence of miR-155, enabling a ratiometric measurement of miR with high sensitivity. The limit of detection (LOD) of our HCR-AgNCs nanosensor is 1.13 fM in buffered solution. We have also tested the assay in diluted serum samples, with comparable LOD of 1.58 fM obtained. This shows the great promise of our HCR-AgNCs nanosensor for clinical application.

A Smartphone Optical Device for Point-of-Care Testing of Glucose and Cholesterol Using Ag NPs/UiO-66-NH2-Based Ratiometric Fluorescent Probe

Point-of-care testing (POCT) with the advantages of simplicity, rapidity, portability, and low-cost is of great importance to improve healthcare, especially in resource-limited settings and home healthcare settings. Moreover, it is a great challenge to quantitative POCT of multiplexed biomarkers within a single accessible assay but provides enhanced diagnostic accuracy and improved diagnostic efficiency. Herein, a smartphone optical device has been designed for POCT of glucose and cholesterol in metabolic syndrome patients using a ratiometric fluorescent sensor. The sensing system of Ag NPs/UiO-66-NH₂ and o-phenylenediamine presents a dual-emission response to H₂O₂ (the main product of glucose and cholesterol catalyzed by glucose oxidase and cholesterol oxidase) on account of the inner filter effect, resulting in an increase in the response of the fluorescence intensity ratio (F_555 nm/F_425 nm) accompanied by a distinguishable color transition from blue to yellow green. After compositing probes with a flexible substrate, the obtained test strip can be integrated with a smartphone-based portable platform to read RGB values for accurate testing of glucose and cholesterol with both detection limits of 10 μmol L^-1, which are hundreds of times lower than their concentrations in human serum. With the advantages of low-cost, ease of operation, and broad adaptability, this smartphone optical device holds great potential for portable detection of numerous targets in personalized healthcare and clinical diagnosis.

Multiplexed Profiling of Extracellular Vesicles for Biomarker Development

Extracellular vesicles (EVs) are cell-derived membranous particles that play a crucial role in molecular trafficking, intercellular transport and the egress of unwanted proteins. They have been implicated in many diseases including cancer and neurodegeneration. EVs are detected in all bodily fluids, and their protein and nucleic acid content offers a means of assessing the status of the cells from which they originated. As such, they provide opportunities in biomarker discovery for diagnosis, prognosis or the stratification of diseases as well as an objective monitoring of therapies. The simultaneous assaying of multiple EV-derived markers will be required for an impactful practical application, and multiplexing platforms have evolved with the potential to achieve this. Herein, we provide a comprehensive overview of the currently available multiplexing platforms for EV analysis, with a primary focus on miniaturized and integrated devices that offer potential step changes in analytical power, throughput and consistency.

A Customized Microfluidic Paper-Based Platform for Colorimetric Immunosensing: Demonstrated via hCG Assay for Pregnancy Test

Over the past decades, paper-based lateral flow immunoassays (LFIAs) have been extensively developed for rapid, facile, and low-cost detection of a wide array of target analytes in a point-of-care manner. Conventional home pregnancy tests are the most significant example of LFAs, which detect elevated concentrations of human chorionic gonadotrophin (hCG) in body fluids to identify early pregnancy. In this work, we have upgraded these platforms to a higher version by developing a customized microfluidic paper-based analytical device (μPAD), as the new generation of paper-based point-of-care platforms, for colorimetric immunosensing. This will offer a cost-efficient and environmentally friendly alternative platform for paper-based immunosensing, eliminating the need for nitrocellulose (NC) membrane as the substrate material. The performance of the developed platform is demonstrated by detection of hCG (as a model case) in urine samples and subsequently indicating positive or negative pregnancy. A dual-functional silane-based composite was used to treat filter paper in order to enhance the colorimetric signal intensity in the detection zones of μPADs. In addition, microfluidic pathways were designed in a manner to provide the desired regulated fluid flow, generating sufficient incubation time (delays) at the designated detection zones, and consequently enhancing the obtained signal intensity. The presented approaches allow to overcome the existing limitations of μPADs in immunosensing and will broaden their applicability to a wider range of assays. Although, the application of the developed hCG μPAD assay is mainly in qualitative (i.e., positive or negative) detection of pregnancy, the semi-quantitative measurement of hCG was also investigated, indicating the viability of this assay for sensitive detection of the target hCG analyte within the related physiological range (i.e., 10-500 ng/mL) with a LOD value down to 10 ng/mL.

All-sealed paper-based electrochemiluminescence platform for on-site determination of lead ions

Lab-on-paper (LOP) devices are urgently required for the rapid development of point-of-care diagnoses and environmental assays. Herein, an all-sealed paper-based electrochemiluminescence (ECL) platform was developed to achieve lead ions (Pb²⁺) sensitive analysis via incorporating convenient plastic package technology. Benefiting from transparent plastic encapsulation, the sealed devices effectively avoided the interference of O₂. Meanwhile, myrica rubra-like Pt nanomaterials (MPNs) prepared by an economical and easy-to-operate ultrasound method were employed to catalyze H₂O₂ decomposition. With the help of Pb²⁺-specific DNAzymes, the oligonucleotide probe functionalized via MPNs could be detached from the device in the presence of target, resulting in the reduced ECL intensity. Moreover, the combination of modified paper electrode with functional regions separated by multiple layers of wax enhanced the practicability of the LOP device for rapid detection. Under the optimal conditions, the all-sealed platform achieved wide linear relationship ranging from 0.01 nM to 0.05 μM with a low detection limit of 0.004 nM for sensitive detecting Pb²⁺. It is believed that this platform could provide a robust, simple and versatile strategy for sensitive determination of heavy metal ions, and be applied in on-site contamination analysis in the future.

Rational Design and Facile Synthesis of Dual-State Emission Fluorophores: Expanding Functionality for the Sensitive Detection of Nitroaromatic Compounds

Six novel benzimidazole-based D-π-A compounds 4 a-4 f were concisely synthesized by attaching different donor/acceptor units to the skeleton of 1,3-bis(1H-benzimidazol-2-yl)benzene on its 5-position through an ethynyl link. Due to the twisted conformation and effective conjugation structure, these dual-state emission (DSE) molecules show intense and multifarious photoluminescence, and their fluorescence quantum yields in solution and solid state can be up to 96.16 and 69.82 %, respectively. Especially, for excellent photostability, obvious solvatofluorochromic and extraordinary wide range of solvent compatibility, DSE molecule 4 a is a multifunctional fluorescent probe for the visual detection of nitroaromatic compounds (NACs) with the limit of detection as low as 10^-7 M. The quenching mechanism has been proved as the results of photoinduced electron transfer and fluorescence resonance energy transfer processes. Importantly, probe 4 a can sensitively detect NACs not only in real water samples, but also on 4 a-coated strips and 4 a@PBAT thin films.

Chemiluminescence-Derived Self-Powered Photoelectrochemical Immunoassay for Detecting a Low-Abundance Disease-Related Protein

Early diagnosis of cancers relies on the sensitive detection of specific biomarkers, but most of the current testing methods are inaccessible to home healthcare due to cumbersome steps, prolonged testing time, and utilization of toxic and hazardous substances. Herein, we developed a portable self-powered photoelectrochemical (PEC) sensing platform for rapid detection of prostate-specific antigen (PSA, as a model disease-related protein) by integrating a self-powered photoelectric signal output system catalyzed with chemiluminescence-functionalized Au nanoparticles (AuNPs) and a phosphomolybdic acid (PMA)-based photochromic visualization platform. TiO₂-g-C₃N₄-PMA photosensitive materials were first synthesized and functionalized on a sensor chip. The sensor consisted of filter paper modified with a photocatalytic material and a regional laser-etched FTO electrode as an alternative to a conventional PEC sensor with a glass-based electrode. The targeting system involved a monoclonal anti-PSA capture antibody-functionalized Fe₃O₄ magnetic bead (mAb₁-MB) and a polyclonal anti-PSA antibody (pAb₂)-N-(4-aminobutyl)-N-ethylisoluminol-AuNP (ABEI-AuNP). Based on the signal intensity of the chemiluminescent system, the photochromic device color changed from light yellow to heteropoly blue through the PMA photoelectric materials integrated into the electrode for visualization of the signal output. In addition, the electrical signal in the PEC system was amplified by a sandwich-type capacitor and readout on a handheld digital multimeter. Under optimum conditions, the sensor exhibited high sensitivity relative to PSA in the range of 0.01-50 ng mL^-1 with a low detection limit of 6.25 pg mL^-1. The flow-through chemiluminescence reactor with a semiautomatic injection device and magnetic separation was avoid of unstable light source intensity inherent in the chemiluminescence process. Therefore, our strategy provides a new horizon for point-of-care analysis and rapid cost-effective clinical diagnosis.

A fluorescent probe with dual acrylate sites for discrimination of different concentration ranges of cysteine in living cells

Monitoring of cysteine (Cys) is of significant importance for studying Cys-involved biological functions and clinically diagnosing Cys-related diseases. Recently, few fluorescent probes with two different reacting sites were reported to be capable of sensing different concentration ranges of Cys with distinct fluorescence signals, particularly suiting for bioimaging. However, due to relative sophisticated synthesis and moderate selectivity, the applications of these probes were still severely restricted. In this work, we proposed a novel probe design strategy by utilizing two same reacting groups, instead of two different reacting groups, to simplify the synthesis route and minimize the interference from competing species. Same reacting groups in a probe with different steric hindrances could exhibit different reactivities to Cys. This probe showed distinguishable fluorescence peak wavelengths towards low and high concentration ranges of Cys, giving green and blue emissions, respectively. Moreover, this probe was successfully applied for monitoring of Cys concentration in living cells. We believe this work provided a simpler strategy for dual-site fluorescent probes to sense difference concentration ranges of Cys, which may inspire more probe design in future.

Point-of-care detection of cytokines in cytokine storm management and beyond: Significance and challenges

Cytokines are signaling molecules between cells in immune system. Cytokine storm, due to the sudden acute increase in levels of pro-inflammatory circulating cytokines, can result in disease severity and major-organ damage. Thus, there is urgent need to develop rapid, sensitive, and specific methods for monitoring of cytokines in biology and medicine. Undoubtedly, point-of-care testing (POCT) will provide clinical significance in disease early diagnosis, management, and prevention. This review aims to summarize and discuss the latest technologies for detection of cytokines with a focus on POCT. The overview of diseases resulting from imbalanced cytokine levels, such as COVID-19, sepsis and other cytokine release syndromes are presented. The clinical cut-off levels of cytokine as biomarkers for different diseases are summarized. The challenges and perspectives on the development of cytokine POCT devices are also proposed and discussed. Cytokine POCT devices are expected to be the ongoing spotlight of disease management and prevention during COVID-19 pandemic and also the post COVID-19 pandemic era.

Nanomaterial-Based Dual-Emission Ratiometric Fluorescent Sensors for Biosensing and Cell Imaging

Owing to the unique optophysical properties of nanomaterials and their self-calibration characteristics, nanomaterial-based (e.g., polymer dots (Pdots) quantum dots (QDs), silicon nanorods (SiNRs), and gold nanoparticle (AuNPs), etc.) ratiometric fluorescent sensors play an essential role in numerous biosensing and cell imaging applications. The dual-emission ratiometric fluorescence technique has the function of effective internal referencing, thereby avoiding the influence of various analyte-independent confounding factors. The sensitivity and precision of the detection can therefore be greatly improved. In this review, the recent progress in nanomaterial-based dual-emission ratiometric fluorescent biosensors is systematically summarized. First, we introduce two general design approaches for dual-emission ratiometric fluorescent sensors, involving ratiometric fluorescence with changes of one response signal and two reversible signals. Then, some recent typical examples of nanomaterial-based dual-emission ratiometric fluorescent biosensors are illustrated in detail. Finally, probable challenges and future outlooks for dual-emission ratiometric fluorescent nanosensors for biosensing and cell imaging are rationally discussed.

Aggregation induced emission of chalcones

There is always a need for efficient luminescent materials with simple synthesis and possible ease of hydrogen atom or functional group manipulation for use in different optoelectronic and biological applications. However, for certain real-world uses aggregation caused quenching effect of luminophores in their solid/aggregate state is undesirable, and is a cause of concern in areas, wherein the solid-state optical performance is more crucial. In this regard, chalcones have been explored for their ability to display aggregation-induced emission (AIE) or aggregation-induced enhanced emission (AIEE), which can be of practical use. This article is thus focused on an integrated evidence-based report on the AIE/AIEE-active chalcone systems for potential technological and biological applications.

Graphic abstract

Preparation of a molecularly imprinted test strip for point-of-care detection of thiodiglycol, a sulfur mustard poisoning metabolic marker

Conventional methods for the detection of the sulfur mustard poisoning metabolic marker, thiodiglycol (TDG), require expensive instruments and reagents as well as professional operators. To address these problems, a novel test strip based on a molecularly imprinted sensitive membrane (MIM) was developed in this work for point-of-care (POC) detection of TDG. The TDG test strip was prepared conveniently by coating molecular imprinted polymers (MIPs) on a nitrocellulose membrane. When the sample contained TDG, the MIPs could specifically bind with TDG. A great number of AuNPs (AuNPs) could then be adsorbed on the test strip via the formation of an Au-S bond between TDG and AuNPs, giving the test strip the obvious red color of AuNPs. In the absence of TDG, the test strip exhibited much lighter color because it could not adsorb AuNPs. By monitoring the color change of the test strip, TDG could be detected from 1.0 ng/mL to 100.0 μg/mL with a detection limit of 0.23 ng/mL (3σ) under the optimal conditions (the molar ratio of TDG to MAA was 1:2; the eluent was chloroform; the elution time was 50 min; the reaction time between MIPs and TDG was 15 min; the adsorption time of AuNPs was 40 min; the temperature of the reaction system was 35 °C). This method has excellent selectivity and has been used to detect TDG in urine, showing great potential for POC detection of TDG in clinical samples.

Ratio-Adjustable Upconversion Luminescence Nanoprobe for Ultrasensitive In Vitro Diagnostics

The development of precise medicine requires diagnostic probes to simultaneously satisfy an excellent detection limit and a wide linear analysis range because of enormous individual-discrepancy of disease biomarker concentrations, yet it remains challenging. Herein, an upconverison nanoprobe with a luminescence ratio flexibly tailored was designed for ultrasensitive monitoring exhaled nitric oxide to indicate the clinical course of asthma. Two independent emissions from the same nanoprobe can be discretionarily modulated to vary their intensity ratios for adapting different analysis requirements. Delightfully, this novel nanoprobe demonstrated a 100-fold lower detection limit compared with the traditional ratiometric fluorescence manner and a more broad linear detection range from the subpart per billion (ppb) level to hundreds of ppb. This ratio-adjustable fluorescence detection strategy holds great potential for miscellaneous disease diagnosis applications.

A HiPAD Integrated with rGO/MWCNTs Nano-Circuit Heater for Visual Point-of-Care Testing of SARS-CoV-2

Nowadays, the main obstacle for further miniaturization and integration of nucleic acids point-of-care testing devices is the lack of low-cost and high-performance heating materials for supporting reliable nucleic acids amplification. Herein, reduced graphene oxide hybridized multi-walled carbon nanotubes nano-circuit integrated into an ingenious paper-based heater is developed, which is integrated into a paper-based analytical device (named HiPAD). The coronavirus disease 2019 (COVID-19) pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is still raging across the world. As a proof of concept, the HiPAD is utilized to visually detect the SARS-CoV-2 N gene using colored loop-mediated isothermal amplification reaction. This HiPAD costing a few dollars has comparable detection performance to traditional nucleic acids amplifier costing thousands of dollars. The detection range is from 25 to 2.5 × 1010 copies mL-1 in 45 min. The detection limit of 25 copies mL-1 is 40 times more sensitive than 1000 copies mL-1 in conventional real-time PCR instruments. The disposable paper-based chip could also avoid potential secondary transmission of COVID-19 by convenient incineration to guarantee biosafety. The HiPAD or easily expanded M-HiPAD (for multiplex detection) has great potential for pathogen diagnostics in resource-limited settings.

Simple MoS2-Nanofiber Paper-Based Fluorescence Immunosensor for Point-of-Care Detection of Programmed Cell Death Protein 1

Programmed cell death protein 1 (PD-1) is one of the coinhibitory checkpoints upon T cell activation, the abnormal expression of which severely threatens host immune modulatation for chronic infection. Thus, fast and sensitive monitoring of PD-1 is of vital importance for early diagnosis and cancer treatment. The current detection methods largely based on enzyme-linked immunosorbent assay (ELISA) require time-consuming incubation and complicated washing steps. Herein, we designed a simple and portable nanofiber paper (NFP)-based fluorescence "off-on" immunosensor for PD-1 rapid determination. Molybdenum disulfide (MoS₂) nanosheets modified NFP (MoS₂-NFP) was employed for adsorbing and immobilizing CdSe/ZnS quantum dots-antibody (QDs-Ab) complex to construct a ready-to-use fluorescent immunosensor. The fluorescent signal of QDs-Ab was initially quenched by MoS₂ under the Förster resonance energy transfer (FRET) effect. When the PD-1 target was specifically captured onto NFP by immunization, the QDs-Ab-PD-1 complex was promptly desorbed from the MoS₂-NFP surface, resulting in FRET impediment and fluorescence recovery. As an alternative quenching agent, graphene oxide (GO) served as a contrast to investigate NFP-based sensing performance. Owing to superior quenching and desorption efficiency, the MoS₂-NFP-based fluorescence immunosensor exhibited nearly 2-fold lower detection limit (85.5 pg/mL) than GO-NFP-based sensor (151 pg/mL) for PD-1 monitoring. Excellent selectivity and satisfactory recovery in PD-1 mouse cell culture supernatant samples were confirmed as well. In addition, the comparable detectability of the MoS₂-NFP-based immunosensor was accurately evaluated by a standard PD-1 mouse ELISA kit. This study displayed a simple, rapid, low-cost, and portable point-of-care PD-1 assay, indicating its broad application prospect toward clinical diagnoses.

NBD-Based Environment-Sensitive Fluorescent Probes for the Human Ether-a-Go-Go-Related Gene Potassium Channel

Three environment-sensitive probes were developed for the hERG channel based on the nitrobenzoxadiazole fluorophore herein. After careful evaluation, probes M1 and M3 were found to have a high affinity for imaging the hERG channel in the cell-based experiment. Compared with other fluorescent labeling technologies (such as fluorescent proteins), these probes afford a convenient and economical method to determine hERG channel in vitro and in cellulo. Therefore, these probes are expected to be applicable for usage in physiological and pathological studies of hERG channels and have the potential to establish a screening system for hERG channels.

Ratiometric Fluorescent Lateral Flow Immunoassay for Point-of-Care Testing of Acute Myocardial Infarction

We report the development of a highly sensitive ratiometric fluorescent lateral flow immunoassay (RFLFIA) strip for rapid and accurate detection of acute myocardial infarction biomarker, namely heart-type fatty acid binding protein (H-FABP). The RFLFIA strip works in terms of ratiometric change of fluorescence signal, arising from blending of fluorescence emitted by two composite nanostructures conjugated to capture and probe antibodies and inner filter effect of gold nanoparticles. In conjunction with using custom smartphone-based analytical device and tonality analysis, quantitative detection of H-FABP was achieved with a low limit of detection at 0.21 ng mL^-1 . The RFLFIA strip can generate a visually distinguishable green-to-red color change around the threshold concentration of H-FABP (6.2 ng mL^-1 ), thus allowing the semi-quantitative diagnosis by the naked eye.

Harmonic optical microfiber Bragg grating immunosensor for the accelerative test of cardiac biomarker (cTn-I)

Fiber-optic biosensor has shown tremendous promise in probing cardiac biomarkers label-free and in-operando. However, temperature cross-sensitivity is ubiquitously found and impedes further advances of the fiber-optic biosensors, especially for the scenario of rapid test at-body. In this study, we exploit a new regime that harnesses the harmonic resonances of a single microfiber Bragg grating to rule out the impact of the thermal noise. The reflections yielded by the harmonics can be engineered simultaneously at the two overriding optical wavebands, i.e., 1 μm and 1.55 μm, promising a remote acquisition of the sensing signals at patient by virtue of the Yb and/or Er-doped fiber amplifiers which are highly commercial. Furthermore, the functionality of the temperature-offset allows for the understanding of the biomolecular stimulating at the body temperature and thus facilitating the acceleration of the cardiac biomarker test. The proposed proof-of-concept enriches the arsenal of tools for fiber biosensors and enables a vista for the instant and in-vivo diagnosis of acute heart diseases.

A DS2-specific flavonoid-based probe with a unique dual-emissive response to human serum albumin

The hydroxyl substituent in flavonoids can cause the binding site to change from DS1 to DS2 and restore the ESIPT process of flavonoids, thereby leading to a unique dual-emissive response towards human serum albumin.

Ratiometric Cataluminescence Sensor of Amine Vapors for Discriminating Meat Spoilage

The freshness of meat has always been the focus of attention from consumers and suppliers for health and economic reasons. Usually, amine vapors, as one of the main components of the gas produced in the process of meat spoilage, can be used to monitor meat spoilage. Here, a new ratiometric cataluminescence (CTL) sensor based on energy transfer was developed to identify amine vapors and monitor meat freshness. After Tb doping, amine vapors exhibit a dual-wavelength (490 and 555 nm) property of CTL signals when reacted on the surface of Tb-doped La₂O₂CO₃, and the ratio of I₅₅₅ to I₄₉₀ (R_555/490) is a unique value for a given analyte within a wide range of concentrations. To illustrate the new sensor, 15 amine vapors were successfully identified using R_555/490, including homologues and isomers. Besides, this sensor was used to monitor four meats, and the freshness of meats can be distinguished by cluster analysis successfully. Moreover, further discussion of energy-transfer phenomena and influence factors has facilitating effects on exploring the mechanism of energy transfer at the gas-solid interface.

Recent advances in lab-on-paper diagnostic devices using blood samples

Lab-on-paper, or microfluidic paper-based analytical devices (μPADs), use paper as a substrate material, and are patterned with a system of microchannels, reaction zones and sensing elements to perform analysis and detection. The sample transfer in such devices is performed by capillary action. As a result, external driving forces are not required, and hence the size and cost of the device are significantly reduced. Lab-on-paper devices have thus attracted significant attention for point-of-care medical diagnostic purposes in recent years, particularly in less-developed regions of the world lacking medical resources and infrastructures. This review discusses the major advances in lab-on-paper technology for blood analysis and diagnosis in the past five years. The review focuses particularly on the many clinical applications of lab-on-paper devices, including diabetes diagnosis, acute myocardial infarction (AMI) detection, kidney function diagnosis, liver function diagnosis, cholesterol and triglyceride (TG) analysis, sickle-cell disease (SCD) and phenylketonuria (PKU) analysis, virus analysis, C-reactive protein (CRP) analysis, blood ion analysis, cancer factor analysis, and drug analysis. The review commences by introducing the basic transmission principles, fabrication methods, structural characteristics, detection techniques, and sample pretreatment process of modern lab-on-paper devices. A comprehensive review of the most recent applications of lab-on-paper devices to the diagnosis of common human diseases using blood samples is then presented. The review concludes with a brief summary of the main challenges and opportunities facing the lab-on-paper technology field in the coming years.