Sorption of norfloxacin, sulfamerazine and oxytetracycline by KOH-modified biochar under single and ternary systems

Efficient remediation of antibiotic pollutants from the environment by innovative biochar: current updates and prospects

The increased antibiotic consumption and their improper management led to serious antibiotic pollution and its exposure to the environment develops multidrug resistance in microbes against antibiotics. The entry rate of antibiotics to the environment is much higher than its exclusion; therefore, efficient removal is a high priority to reduce the harmful impact of antibiotics on human health and the environment. Recent developments in cost-effective and efficient biochar preparation are noticeable for their effective removal. Moreover, biochar engineering advancements enhanced biochar remediation performance several folds more than in its pristine forms. Biochar engineering provides several new interactions and bonding abilities with antibiotic pollutants to increase remediation efficiency. Especially heteroatoms-doping significantly increased catalysis of biochar. The main focus of this review is to underline the crucial role of biochar in the abatement of emerging antibiotic pollutants. A detailed analysis of both native and engineered biochar is provided in this article for antibiotic remediation. There has also been discussion of how biochar properties relate to feedstock, production conditions and manufacturing technologies, and engineering techniques. It is possible to produce biochar with different surface functionalities by varying the feedstock or by modifying the pristine biochar with different chemicals and preparing composites. Subsequently, the interaction of biochar with antibiotic pollutants was compared and reviewed. Depending on the surface functionalities of biochar, they offer different types of interactions e.g., π-π stacking, electrostatic, and H-bonding to adsorb on the biochar surface. This review demonstrates how biochar and related composites have optimized for maximum removal performance by regulating key parameters. Furthermore, future research directions and opportunities for biochar research are discussed.

High specific surface area N-doped activated carbon from hydrothermal carbonization of shaddock peel for the removal of norfloxacin from aqueous solution

A novel N-doped activated carbon (NAC) derived from shaddock peel was investigated to remove norfloxacin (NFX) from aqueous solution. The Box-Behnken central composite design (BBD) was used to optimize the preparation conditions of NAC. The specific surface area of NAC was 2,481.81 m² g^-1, which was obtained at 1,106 K activation temperature, 2.4 h residence time, and 2.3:1 mass ratio of KOH to hydrochar. Moreover, the equilibrium data were perfectly represented by Langmuir and Koble-Corrigan isotherms, and the adsorption process was precisely described by the pseudo-second-order kinetic model. Besides, the adsorption of NFX on NAC was mainly controlled by π-π electron-donor-acceptor (EDA) interaction, hydrophobic effect, hydrogen-bonding, electrostatic interaction and Lewis acid-base effect. The maximum monolayer adsorption capacity of NFX was 746.29 mg g^-1 at 298 K, implying that NAC was a promising adsorbent for the removal of NFX from aqueous solution.

Efficient adsorptive removal of fluoroquinolone antibiotics from water by alkali and bimetallic salts co-hydrothermally modified sludge biochar

Fluoroquinolones are one of most commonly used antibiotics for preventing and treating bacterial infections and their unsatisfactory removal by conventional wastewater treatment technology have aroused widespread attention. A novel adsorbent of KMSBC was the first time synthesized and tested to adsorb three typical fluoroquinolone antibiotics of CIP, NOR and OFL from water. The characterization analysis showed that KMSBC possessed the superior porous structure, abundant functional groups and greater graphitic degree. Together with kinetics, isotherms, thermodynamics and critical factors (e.g., biochar dose, reaction time/temperature, fluoroquinolone antibiotics concentration, pH, co-existing ionic strength and HA concentration) analysis suggested that pore filling, π-π conjugation, H-bonding and electrostatic interaction were the key mechanisms for fluoroquinolone antibiotics adsorption by KMSBC. KMSBC exhibited the optimum adsorption performance at pH = 5 despite the adsorbates. The maximum adsorption capacity of KMSBC for CIP, NOR and OFL were 49.9, 55.7 and 47.4 mg/g at 25 °C, respectively. Also, KMSBC exhibited the good magnetic sensitivity and stability with the leaching concentrations of Fe were far below than environmental limit (GB5749-2006) at various pH (from 3 to 12), ionic strength and HA concentrations. Additionally, KMSBC performed a stable sustainable adsorption performance in recycles by NaOH regeneration. Thus, KMSBC had the potential to be a promising adsorbent for fluoroquinolone antibiotics removal with favorable adsorption capacity, environmental security and easy regeneration performance.

Pyrolyzing pharmaceutical sludge to biochar as an efficient adsorbent for deep removal of fluoroquinolone antibiotics from pharmaceutical wastewater: Performance and mechanism

This study explored the impact of pyrolysis parameters and modification methods on the characteristics of pharmaceutical sludge biochar, and investigated its capacity and mechanisms for levofloxacin (LEV), a typical fluoroquinolone antibiotics, adsorption. The results showed that S_BET of the biochar was improved with temperature increase, but decreased when temperature reached 900 °C. Under the optimal pyrolysis condition of 800 °C and 90 min, the biochar possessed the highest S_BET of 264.05 m² g^-1, excellent iodine value of 401.41 ± 3.84 mg∙g^-1 and phenol adsorption of 57.36 ± 3.39 mg∙g^-1. Among KOH, ZnCl₂, and CO₂ modifications, ZnCl₂ modification achieved the highest phenol adsorption of 123.40 ± 4.65 mg g^-1, with a significantly improved S_BET of 534.91 m² g^-1. The maximum LEV adsorption capacity of ZnCl₂ modified biochar, PZBC800, reached 159.26 mg g^-1, which overwhelmed the reported sludge biochars. BET, zeta potential, FT-IR, XPS, and Raman analysis, along with quantum chemistry calculation, revealed that pore filling, hydrogen bonding, π-π interaction, surface complexation, and electrostatic interaction were the main mechanisms for the excellent LEV adsorption performance of PZBC800. Deep removal (99.9%) of Fluoroquinolones (FQs) from pharmaceutical wastewater was also achieved by PZBC800 adsorption. The study promoted the development of pharmaceutical sludge biochar preparation and its application in advanced treatment of FQs pharmaceutical wastewater.

Enhanced effect of biochar on leaching vanadium and copper from stone coal tailings by Thiobacillus ferrooxidans

Among the many extraction technologies for recovering metal resources from tailings, bioleaching technology is gradually showing its momentum. In our research, the enhanced effect of biochar on the bioleaching of stone coal tailings by Thiobacillus ferrooxidans (T. ferrooxidans) has been explored. In the static bioleaching experiment for 10 days, the leaching rate of vanadium (V) and copper (Cu) increased by 26.8% and 21.0% respectively after adding 5 g/L biochar. The dynamic bioleaching experiment further verified that under the promotion of biochar, the 44 day cumulative leaching rate of V and Cu increased by 15.3% and 14.5%, respectively. The promoting effect of biochar on T. ferrooxidans was mainly reflected in two aspects. The unique porous structure of biochar created a microenvironment for free microorganisms for inhabitation, while storing abundant nutrients. Biochar can also act as an excellent electronic medium to promote electron transfer, improving the oxidation ability of T. ferrooxidans on Fe²⁺. Furthermore, the presence of biochar may effectively inhibit the formation of jarosite precipitation on tailings in bioleaching, thereby improving the dissolution of tailings and the release of metal elements. This study demonstrates that biochar-enhanced bioleaching may be an efficient and environmentally friendly method for recovering metal resources from tailings.

An efficient, green and sustainable potassium hydroxide activated magnetic corn cob biochar for imidacloprid removal

The extensive use of imidacloprid (IMI) has led to its being frequently detected in natural water, also caused the potential damage to the ecosystem. Development of efficient, green and sustainable technique is demanded to eliminate this problem. A novel biochar (KMCBC) derived from agriculture waste of corn cob was first time co-modified by potassium hydroxide (KOH), ferric chloride (FeCl₃) and zinc chloride (ZnCl₂), which showed the greater adsorption amount (410 mg g^-1 at 298 K) for imidacloprid (IMI). Pseudo-second-order kinetic and Langmuir isotherm models fitted well with the experimental data, together with the physicochemical characterization analysis, demonstrating that the adsorption process of IMI by KMCBC might be mainly controlled by micropore filling, π-π electron donor-acceptor and functional groups interactions (H-bonding and complexation). Additionally, the thermodynamics parameters suggested that IMI adsorption in this study was a spontaneous, endothermic and randomly increasing process. Besides, KMCBC owned the easy separation performance and promising environmental safety, also exhibited a high selective adsorption capacity regardless of solution pH (its optimum adsorption performance for IMI was obtained at pH = 5), inorganic ions strength and humic acid (HA) concentrations. The regenerated KMCBC (synergistic ultrasound/ethanol) could sustainably and efficiently adsorb IMI in the reuse cycles. Therefore, this study provided an efficient, green and sustainable adsorbent of KMCBC for IMI removal.

A Review on Bamboo as an Adsorbent for Removal of Pollutants for Wastewater Treatment

Water and wastewater treatment are very important for obtaining clean and sanitary water as well as protecting the environment from toxic pollutants. Not only enriched with cellulose and carbon but the abundant resources of bamboo also make it suitable to be utilized as an adsorbent. With the right processing technologies and improvements, the potential of bamboo is unlimited. This study review provides knowledge on the use of bamboo-based adsorbents for the removal of contaminants and pollutants in wastewater in the form of activated carbon, biochar, and aerogel. This review highlighted bamboo utilization and its relevance as an adsorbent for wastewater treatment. The technologies for the processing and improvement of bamboo as well as the performance of the bamboo-based adsorbents are also discussed in this study. The adsorption capacity of bamboo has shown improvement with modification and good adsorption capacity achieved with some of the adsorbent being able to be recycled and reused.

A Comprehensive Insight on Adsorption of Polyaromatic Hydrocarbons, Chemical Oxygen Demand, Pharmaceuticals, and Chemical Dyes in Wastewaters Using Biowaste Carbonaceous Adsorbents

Recent trends in adsorption of hazardous organic pollutants including Polyaromatic Hydrocarbons (PAHs), Chemical Oxygen Demand (COD), Pharmaceuticals, and Chemical Dyes in wastewater using carbonaceous materials such as activated carbon (AC) and biochar (BC) have been discussed in this paper. Utilization of biomass waste in the preparation of AC and BC has gained a lot of attention recently. This review outlines the techniques used for preparation, modification, characterization, and application of the above-mentioned materials in batch studies. The approaches towards understanding the adsorption mechanisms have also been discussed. It is observed that in the majority of the studies, high removal efficiencies were reported using biowaste adsorbents. Regarding the full potential of adsorption, varying values were obtained that are strongly influenced by the adsorbent preparation technique and adsorption method. In addition, most of the studies were concentrated on the kinetic, isotherm equilibrium, and thermodynamic aspects of adsorption, suggesting the dominant isotherm and kinetic models as Langmuir or Freundlich and pseudo-second-order models. Due to development in biosorbents, adsorption has been found to be increasingly economical. However, application of these adsorbents at commercial scale has not been adequately investigated and needs to be studied. Most of the studies have been conducted on synthetic solutions that do not completely represent the discharged effluents. This also needs attention in future studies.

Sulfur-zinc modified kaolin/steel slag: A particle electrode that efficiently degrades norfloxacin in a neutral/alkaline environment

In this work, sulfur and zinc were used to modify the steel slag/kaolin particle electrodes. Sulfur-zinc modified kaolin/steel slag particle electrodes (S-Zn-KSPEs) was successfully prepared. In a wide pH range (pH 3-10), S-Zn-KSPEs could efficiently degrade norfloxacin at low voltage (4 V) within 90 min. The removal rate of NOR by S-Zn-KSPEs was about 100% in acidic environment, more than 90% in neutral environment, and more than 80% in alkaline environment. And S-Zn-KSPEs could also efficiently degrade methylene blue, diuron, levofloxacin and other refractory pollutants under neutral conditions. S-Zn-KSPEs showed good stability and recyclability, and could maintain high catalytic activity after 8 cycles in a neutral or alkaline environment. The possible degradation mechanism and the degradation pathway of norfloxacin are proposed. In addition, S-Zn-KSPEs also showed a higher treatment effect in the treatment of actual surface water bodies. And S-Zn-KSPEs had a strong acid-base buffering capacity, which could avoid some pretreatment measures of wastewater in practical applications.

The sorption of Tebuconazole and Linuron from an Aqueous Environment with a Modified Sludge-Based Biochar: Effect, Mechanisms, and Its Persistent Free Radicals Study

In this study, the sludge-based biochar was prepared and utilized as an adsorbent for the removal of two commonly used pesticides in agriculture, namely tebuconazole (Teb) and linuron (Lin) in an aqueous solution. The main contributing factors such as biochar preparation conditions, persistent free radicals as well as contact time, agitation speed, biochar dose, temperature, and pH were investigated. The physicochemical properties were characterized by SEM + EDS, FTIR, BET, EPR, etc. The results showed that the maximum adsorption capacities based on the Langmuir model was 7.8650 mg g−1 for tebuconazole and that based on Freundlich model was 9.0645 mg·g-1 for linuron at 25°C. The pseudo-second-order kinetic equations were all fitted well to the kinetic process of the adsorption of the two pesticides with all R2 ≥ 0.915. The maximum values of tebuconazole adsorption capacity occur at pH = 3. Meanwhile, linuron was not affected by pH. Both Cr6+ (r = −0.793∗∗/ −0.943∗∗) and humic acid (r = −0.798∗∗/ −0.947∗∗) significantly inhibited the adsorption amount of tebuconazole and linuron onto the biochar. Electron spin resonance signals (ESR) indicated that environmentally persistent radicals (EPFRs) are preferentially formed at lower pyrolysis temperatures and lower transition metal concentrations. The g-factors for BC400, BC600, BCF400, and BCF600 were 2.0036, 2.0035, 2.0034, and 2.0033, respectively, indicating that the EPFRs mainly have a carbon-centered structure with adjacent oxygen atoms. In addition, to close to the actual situation, natural water (from YanTai) was collected to simulate pesticide contamination. This study demonstrates that sludge-based biochar can achieve efficient removal of tebuconazole and linuron in aqueous environment in a short period of time with no secondary environmental risk especially on the waste activated sludge.

Preparation of ammonium-modified cassava waste-derived biochar and its evaluation for synergistic adsorption of ternary antibiotics from aqueous solution

Mono- and co-sorption of the three antibiotics i.e., norfloxacin (NOR), sulfamerazine (SMR) and oxytetracycline (OTC), to raw and NH₄⁺-modified cassava waste biochar added to aqueous solutions were investigated. The NH₄⁺-modified biochar showed higher sorption affinity for both NOR and SMR than the raw biochar, while the raw biochar showed higher sorption affinity for OTC than the modified biochar. The highest sorption to both biochars in both the mono- and competitive sorption systems was found for OTC followed by NOR and SMR. Sorption equilibrium in all systems analyzed was reached within 15 h. Electrostatic interactions among the ionic antibiotics in the multicomponent solution increased NOR and SMR sorption to both biochars. Antibiotics' mono- and co-sorption to biochars decreased with increasing solution pH. The co-sorption of NOR and SMR to the two biochars was regulated by π-π electron-donor-acceptor (EDA) interactions; besides, electrostatic interactions and Hydrogen (H-) bonding played an important part. Cation bridging might have been a potential mechanism to contribute to SMR sorption to the raw biochar, and OTC sorption to the NH₄⁺-modified biochar. These observations will improve our understanding of the simultaneous removal of multiple antibiotics from water or wastewater.

Highly efficient UV/H2O2 technology for the removal of nifedipine antibiotics: Kinetics, co-existing anions and degradation pathways

This study investigates the degradation of nifedipine (NIF) by using a novel and highly efficient ultraviolet light combined with hydrogen peroxide (UV/H2O2). The degradation rate and degradation kinetics of NIF first increased and then remained constant as the H2O2 dose increased, and the quasi-percolation threshold was an H2O2 dose of 0.378 mmol/L. An increase in the initial pH and divalent anions (SO42- and CO32-) resulted in a linear decrease of NIF (the R2 of the initial pH, SO42- and CO32- was 0.6884, 0.9939 and 0.8589, respectively). The effect of monovalent anions was complex; Cl- and NO3- had opposite effects: low Cl- or high NO3- promoted degradation, and high Cl- or low NO3- inhibited the degradation of NIF. The degradation rate and kinetics constant of NIF via UV/H2O2 were 99.94% and 1.45569 min-1, respectively, and the NIF concentration = 5 mg/L, pH = 7, the H2O2 dose = 0.52 mmol/L, T = 20 ℃ and the reaction time = 5 min. The ·OH was the primary key reactive oxygen species (ROS) and ·O2- was the secondary key ROS. There were 11 intermediate products (P345, P329, P329-2, P315, P301, P274, P271, P241, P200, P181 and P158) and 2 degradation pathways (dehydrogenation of NIF → P345 → P274 and dehydration of NIF → P329 → P315).

Potassium hydroxide-modified algae-based biochar for the removal of sulfamethoxazole: Sorption performance and mechanisms

Biochar has been deemed one of the most promising sorbents for the removal of organic pollutants from aqueous solution. In this study, potassium hydroxide-modified Enteromorpha prolifera biochars (PEBCs) were prepared for the first time and applied for efficient sorption of a typical antibiotic, sulfamethoxazole (SMX). The characteristics of PEBCs, including morphology, pore structure, graphitization degree, surface functional groups, and surface element composition, were investigated. Moreover, sorption kinetic and isotherm experiments were carried out to explore the sorption process, performance, and mechanisms. The maximum sorption capacity for SMX can reach 744 mg g^-1, which is much higher than that reported for sorbents. The sorption of SMX onto PEBCs was controlled by both physical and chemical processes. Moreover, pore filling, hydrogen bonding, partitioning, π-π stacking, and electrostatic interactions were possible sorption mechanisms. This study indicated that the structure and properties of algal biochar can be further improved by potassium hydroxide modification at high temperature and applied as an excellent sorbent for the removal of antibiotics from aqueous solution.

Review of organic and inorganic pollutants removal by biochar and biochar-based composites

Biochar (BC) has exhibited a great potential to remove water contaminants due to its wide availability of raw materials, high surface area, developed pore structure, and low cost. However, the application of BC for water remediation has many limitations. Driven by the intense desire of overcoming unfavorable factors, a growing number of researchers have carried out to produce BC-based composite materials, which not only improved the physicochemical properties of BC, but also obtained a new composite material which combined the advantages of BC and other materials. This article reviewed previous researches on BC and BC-based composite materials, and discussed in terms of the preparation methods, the physicochemical properties, the performance of contaminant removal, and underlying adsorption mechanisms. Then the recent research progress in the removal of inorganic and organic contaminants by BC and BC-based materials was also systematically reviewed. Although BC-based composite materials have shown high performance in inorganic or organic pollutants removal, the potential risks (such as stability and biological toxicity) still need to be noticed and further study. At the end of this review, future prospects for the synthesis and application of BC and BC-based materials were proposed. This review will help the new researchers systematically understand the research progress of BC and BC-based composite materials in environmental remediation.

Mechanisms by which different polar fractions of dissolved organic matter affect sorption of the herbicide MCPA in ferralsol

Exogenous dissolved organic matter (DOM) modifies the sorption of 4-chloro-2-methylphenoxyacetic acid (MCPA, a polar herbicide) in soil. However, how the chemodiversity and diverse fractions of DOM affect MCPA sorption is still unknown. Here, DOM was extracted from compost and rice straw; the structure-activity correlations between DOM chemodiversity and their effects on MCPA sorption were investigated by redundancy analysis. Moreover, the mechanism involved was explored by spectroscopic techniques, microbeam and modeling. DOM mainly affected MCPA sorption by altering soil surface properties and MCPA complexed form. Hydrophobic neutral (HON) and acid insoluble matter (AIM) were the fractions of DOM that most inhibited MCPA sorption through soil pore blockage, and were related to the humic-like substances with high aromaticity and large molecular weight. The hydrophobic acid fraction (HOA) only showed an intermediate inhibition on the sorption, although the largest competitive sorption occurred. This was because HOA contained abundant aromatic acid and polar groups with moderate polarity. Thus, the reduced effect caused by competitive sorption was partly compensated by the greatest co-sorption by HOA. The hydrophilic matter (HIM) had the weakest inhibition on MCPA sorption, because this fraction was rich in simple sugars, poly- and oligosaccharides, but lacked aryl groups. The results will aid in the risk assessments and prevention of MCPA in DOM-introduced soil.

A novel CNTs-Fe3O4 synthetized via a ball-milling strategy as efficient fenton-like catalyst for degradation of sulfonamides

A novel composite (CNTs-Fe₃O₄) was synthesized by a ball-milling strategy and characterized by BET, SEM, FTIR, XRD and VSM. The as-fabricated CNTs-Fe₃O₄ was used to remove six sulfonamides by a Fenton degradation process, including sulfanilamide (SAM), sulfamerazine (SMR), sulfadimethoxine (SMX), sulfadiazine (SDZ), sulfamethazine (SMT) and sulfametoxydiazine (SMD). The degradation behaviors of six sulfonamides in CNTs-Fe₃O₄/H₂O₂ system and the relationship between molecular structure of sulfonamides and their degradation behaviors were investigated systematically. Batch experimental results showed that the as-fabricated CNTs-Fe₃O₄ had excellent Fenton catalytic activity for the degradation of sulfonamides due to its unique porous structure and the good combination mode of CNTs with Fe₃O₄ particles. The first-order kinetic mode could better describe the degradation behaviors of six sulfonamides in CNTs-Fe₃O₄/H₂O₂ system, and the degradation rate constant could be ordered as: SAM < SMT < SDZ < SMR < SMD < SMX. The quantitative relationship between the Mulliken charge of sulfonamides (x) and their degradation rate constant (y) in CNTs-Fe₃O₄/H₂O₂ system could be described as: y = - 28.719x + 15.67 (R² = 0.957). Finally, the possible synthesis mechanisms of CNTs-Fe₃O₄ and the degradation mechanisms of sulfonamides in CNTs-Fe₃O₄/H₂O₂ system was proposed.

Biochar derived from chicken manure as a green adsorbent for naphthalene removal

In this study, biochar was generated from chicken manure by using a tube furnace under different temperatures (300, 500, and 700 °C), and the treatments were noted as J300, J500, and J700, respectively. In comparison, another type of biochar was prepared under 500 °C with a muffle furnace, and the treatment was noted as JM500. Biochar in treatment group J500 was subsequently modified with HNO₃ and NaOH, and the treatments were noted as J500-HNO₃ and J500-NaOH, respectively. The sorption efficiencies of naphthalene by the above six types of biochar were evaluated. Characteristic results showed that the surface pores of the biochar were improved with the increase of temperature, and biochar under the treatments J300, J500, J700, and JM500 experienced a high speed of adsorption within 1 h after the naphthalene adsorption started. The adsorption capacity of naphthalene increased with the increase of the initial concentration of naphthalene. Treatment J700 exhibited the largest adsorption capacity since its biochar surface pore structure was more fully developed with a crystal structure formed, and its specific surface area was increased by about 20 times compared to the original chicken manure. After biochar modification using HNO₃ and NaOH, the infrared spectrum changed, and the adsorption active sites were increased. The biochar modification by HNO₃ had a high naphthalene adsorption efficiency compared to NaOH. The order of adsorption capacity was as follows: J500 ≈ JM500 < J300 < J500-NaOH < J500-HNO₃ < J700.

Biosugarcane-based carbon support for high-performance iron-based Fischer-Tropsch synthesis

Exploiting new carbon supports with adjustable metal-support interaction and low price is of prime importance to realize the maximum active iron efficiency and industrial-scale application of Fe-based catalysts for Fischer-Tropsch synthesis (FTS). Herein, a simple, tunable, and scalable biochar support derived from the sugarcane bagasse was successfully prepared and was first used for FTS. The metal-support interaction was precisely controlled by functional groups of biosugarcane-based carbon material and different iron species sizes. All catalysts synthesized displayed high activities, and the iron-time-yield of Fe₄/C_bio even reached 1,198.9 μmol g_Fe⁻¹ s⁻¹. This performance was due to the unique structure and characteristics of the biosugarcane-based carbon support, which possessed abundant C−O, C=O (η¹(O) and η²(C, O)) functional groups, thus endowing the moderate metal-support interaction, high dispersion of active iron species, more active ε-Fe₂C phase, and, most importantly, a high proportion of Fe_xC/Fe_surf, facilitating the maximum iron efficiency and intrinsic activity of the catalyst.

•

A kind of carbon support, derived from the sugarcane bagasse, is prepared

•

This biochar catalyst reaches an excellent FTY value in Fischer-Tropsch synthesis

•

Functional groups and Fe species sizes regulate metal-support interactions

•

Superior performance is due to abundant functional groups and ε-Fe₂C

Performance of wild plants-derived biochar in the remediation of water contaminated with lead: sorption optimization, kinetics, equilibrium, thermodynamics and reusability studies

This study aims to investigate the sorptive performance of Pb(II) from water of a novel biochar (WPC) produced by fast pyrolysis under anoxic conditions of wild plants (WP). The maximum Pb(II) sorption capacity of WPC is 50.25 mg/g under determined optimum conditions, which are solution pH 5.0, WPC dose 50 mg, contact time 180 min and solution temperature 50 °C. The sorption kinetics and isotherm data were observed to fit well with the Ho-McKay and Langmuir models, respectively. The thermodynamic parameters (ΔG^o, ΔH^o and ΔS^o) calculated for the WPC-Pb(II) sorption system showed that the process was spontaneous and endothermic. The Pb(II) desorption and regeneration studies of WPC with different desorbent agents was also performed. The findings in this study showed that WP can be used as an abundant precursor in the production of very low cost and eco-friendly biochar, and also that its biochar can be used as an environmentally-friendly sorbent in wastewater treatment. Novelty statementWith increasing population and developing industry in the world, agriculture and industrial wastes are increasing. These wastes create environmental and water pollution and adversely affect the health of living things. Efforts to eliminate these negativities have a negative impact on the world economy. For this purpose, various improvement methods are applied. However, the adsorption method is widely used due to its ease of application, efficiency and economic. In order to make this method more economical, many researchers have carried out researches on the preparation of low-cost adsorbents, especially from vegetable wastes.The novelty of this study is the first reporting to use wild plants as a sustainable precursor to produce a low-cost biochar using the traditional pyrolysis method and to examine its adsorption performance for Pb(II) ion removal from water. I believe that if this study is published, it will create a paradigm in environmental improvement studies on wild plants evaluation.

Carbon-based adsorbents for fluoroquinolone removal from water and wastewater: A critical review

This review summarizes the adsorptive removal of Fluoroquinolones (FQ) from water and wastewater. The influence of different physicochemical parameters on the adsorptive removal of FQ-based compounds is detailed. Further, the mechanisms involved in the adsorption of FQ-based antibiotics on various adsorbents are succinctly described. As the first of its kind, this paper emphasizes the performance of each adsorbent for FQ-type antibiotic removal based on partition coefficients of the adsorbents that is a more sensitive parameter than adsorption capacity for comparing the performances of adsorbents under various adsorbate concentrations and heterogeneous environmental conditions. It was found that π-π electron donor-acceptor interactions, electrostatic interactions, and pore-filling were the most prominent mechanisms for FQ adsorption by carbon and clay-based adsorbents. Among all the categories of adsorbents reviewed, graphene showed the highest performance for the removal of FQ antibiotics from water and wastewater. Based on the current state of knowledge, this review fills the gap through methodolically understanding the mechanism for further improvement of FQ antibiotics adsorption performance from water and wastewater.

Impacts of biochars on bacterial community shifts and biodegradation of antibiotics in an agricultural soil during short-term incubation

This study investigated the effects of applying different biochars to soil on shifts in the bacterial community, the biodegradation of antibiotics, and their relationships. In total, nine biochars were applied to agricultural soil contaminated with 16 antibiotics. Clustering analysis showed that the responses of bacteria at the genus level to biochars were highly dependent on the biochar feedstock rather than the pyrolysis temperature. Among the antibiotics tested in the study, the biodegradation percentage was lower for tetracyclines (TCs, 6-14%) than sulfonamides (SAs, 8-26%) and quinolones (QLs, 8-24%). For specific individual antibiotics from the same class with similar structures, the high adsorption affinity of soil particles for antibiotics due to hydrophobic interactions (logK_ow) and electrostatic interactions (pK_a) resulted in low biodegradation percentages for antibiotics in the soil. The biodegradation of TCs was affected more by the biochar type (effect size: -10% to 42%) than those of QLs (-26% to 14%) and SAs (-24% to 22%). According to the relationships determined between the bacterial taxonomic composition and biodegradation of antibiotics, Steroidobacter from the phylum Proteobacteria has significant positive correlations with the biodegradation of all SAs (p < 0.01), thereby indicating that Steroidobacter had a high capacity for biodegrading SAs. Significant positive correlations were also detected (p < 0.05) between specific genera (Iamia, Parviterribacter, and Gaiella) from the phylum Actinobacteria and the biodegradation of SAs. No significant positive correlations were found between bacterial genera and the biodegradation percentages for QLs and TCs, possibly due to the specific microorganisms involved in these biodegradation processes. The results in this study provide insights into the biodegradation mechanisms of antibiotics in soil and they may facilitate the development of strategies for the bioremediation of antibiotic-contaminated soil.

Rapid modification of waste expanded polystyrene with H2SO4/trace persulfate in one pot for effective adsorption of fluoroquinolone antibiotic and its regeneration

Norfloxacin, a fluoroquinolone antibiotic, is widely used to treat microbial infections. However, untreated norfloxacin-containing wastewater poses serious threats to the ecosystem and human health. The treatment of waste expanded polystyrene (EPS) by landfilling or incineration could cause environmental problems. In this research, the feasibility of converting EPS into a valuable adsorbent for norfloxacin was evaluated. Results showed that EPS treated with H₂SO₄ (EPS_H2SO4) effectively adsorbed norfloxacin. The optimal sulfonation conditions were 95% H₂SO₄ and 100 °C. Addition of 0.001 M of persulfate during sulfonation obviously shortened the sulfonation time to 7.5 min, and the adsorption ability of modified EPS increased with increasing persulfate dose. Under the experimental conditions of 25 mg L^-1 norfloxacin, pH₀ 6.2, and 0.4 g L^-1 EPS_{H2SO4+persulfate} (dry weight), 97.2% of norfloxacin could be removed after 30 min of adsorption. The adsorption ability of EPS_{H2SO4+persulfate} decreased with increasing solution pH₀, and the optimal pH₀ was 6.2. The Langmuir isotherm best described the adsorption behavior of EPS_{H2SO4+persulfate} (q_max = 140.9 mg L^-1, b = 1.97 L mg^-1, R² = 0.9992). 1 M HCl effectively regenerated the exhausted EPS_{H2SO4+persulfate} at the optimal solid/solution ratio of 8 g L^-1. EPS_{H2SO4+persulfate} maintained excellent adsorption capacity (>80.9%) after eight adsorption-regeneration cycles.

Adsorption behaviors of the pristine and aged thermoplastic polyurethane microplastics in Cu(II)-OTC coexisting system

In this work, the hypothesis that thermoplastic polyurethane (TPU) microplastics (MPs) could form complex toxic pollution by absorbing both antibiotics and heavy metals simultaneously was proposed. The unique features of the adsorption of Cu(II) and oxytetracycline (OTC) on the pristine TPU and photo-aged (aged) TPU MPs in single and coexisting system were investigated, which included the kinetics, isothermal equilibrium and thermodynamics. The possibly synergistic or competitive effects between Cu(II) and OTC were also evaluated. The results showed that the adsorption process of Cu(II) and OTC could be described well by pseudo-second-order kinetic equation. The entire process could be divided into two stages: internal diffusion and external diffusion. The Sips model could give good fitting for the isothermal adsorption equilibrium. The thermodynamic parameters depicted the endothermic nature of adsorptions and the process was spontaneous. In the coexisting system, synergistic or competitive effects depended critically on the ratio of concentrations (Cu(II) vs OTC). When the ratio was 1:1, Cu(II) significantly enhanced the adsorption of OTC, while OTC showed a weak effect on Cu(II) adsorption. The synergies could be attributed to the formation of Cu(II)-OTC complex and the bridging effect of Cu(II). Overall, the adsorption capacity of aged TPU was higher than that of pristine TPU, which was due to the differences in morphological characteristics and functional groups. FTIR studies revealed that ester carbonyl and acylamino groups in the TPU may be involved in the adsorption of Cu(II) and OTC.

Evaluation of sewage sludge biochar and modified derivatives as novel SPE adsorbents for monitoring of bisphenol A

Sewage sludge is abundant biomass, the sustainable management of which remains a big issue worldwide. It was demonstrated that pyrolysis of sewage sludge using simple and cost-effective apparatus can produce biochars, suitable for solid-phase extraction applications of hydrophobic analytes. Detailed characterization showed that modification lead to three more hydrophobic and one more hydrophilic sample, compared to the original biochar. All samples were evaluated in the solid-phase extraction of the emerging contaminant Bisphenol A from aqueous solutions. KOH-SSB and KOH/MeOH-SSB exhibited the most promising behavior, with the latter achieving recoveries of 88.1%, at a quantity of 0.1 g at the natural pH of the BPA solution (6.5). The effect of solution pH was insignificant in the range of 4-7, whereas the initial BPA concentration had no effect in the recovery within the range of 1-100 μg L^-1. The mechanism of interaction between the optimum sample and BPA was based on hydrogen bonding and π-π interactions, establishing earlier observations that the type (and not concentration) of individual surface groups and the total surface area play a significant role in the process.

Effect of carbonization methods on the properties of tea waste biochars and their application in tetracycline removal from aqueous solutions

The properties of biochars and their adsorption performance are highly dependent on the carbonation methods. In this study, five carbonation methods, namely, hydrothermal treatment (HT), direct carbonization (BC), carbonization of hydrochar (HBC), KHCO₃ activation carbonation (KBC), and KHCO₃ activation carbonation of hydrochar (KHBC), were adopted to prepare tea waste biochars. Adsorption behaviors and mechanisms toward tetracycline (TC) by biochar in the aquatic environment were investigated. The results showed that carbonation methods significantly influence the morphology, carbon structure, chemical composition, and functional groups of the biochars based on the characterization of surface area and pore volume analysis, Fourier Transform Infrared Spectroscopy, Raman spectrum, Scanning Electron Microscope, Transmission Electron Microscope, X-ray photoelectron spectroscopy, X-Ray Diffraction, and elemental analysis. Combination of hydrothermal treatment with KHCO₃ activation can significantly increase the surface area and enlarge the pore structure of biochar (KHBC and KBC). The BET of KHCO₃-activated BCs nearly increased 280 times (KHBC: 1350.80 m² g^-1; KBC: 1405.06 m² g^-1). BET, total pore volume and micropores volume of biochar has a positive influence on TC adsorption capacity. In addition, all adsorption processes can be well fitted by Langmuir and pseudo-second-order kinetic models. The maximum adsorption capacity of KHCO₃-activated BCs nearly increased approximately 40 times (KHBC: 451.45 mg g^-1; KBC: 425.17 mg g^-1). The dominant mechanisms of biochar-adsorbed TC were pore-filling effect and π-π interactions, followed by hydrogen bonds and electrostatic interactions. Therefore, KHBC has the potential to act as sorbents for TC removal from aquatic environment.

Sorption of Sulfamethoxazole on Inorganic Acid Solution-Etched Biochar Derived from Alfalfa

The properties of alfalfa-derived biochars etched with phosphoric (PBC) or hydrochloric acid (ClBC) compared with raw materials (BC) were examine in this paper. SEM, FT-IR, XRD, BET and elemental analysis were performed to characterize the micromorphology and chemical structure comprehensibly. The results showed that the porous structure was enhanced, and surface area was increased via etching with inorganic acids. Batch adsorption experiments were performed for sulfamethoxazole (SMX) to biochars. The experimental data showed that modified biochars exhibited higher adsorption capacity for SMX, i.e., the adsorption quantity of ClBC and PBC had risen by 38% and 46%. The impact on pH values suggested that the physisorption, including pore-filling and electrostatic interaction, might be applied to original biochar. In addition, chemisorption also played a role, including hydrogen bonding, π-π electron donor acceptor interaction (π-π EDA), and so on. Furthermore, both pH and coexisting ions also had a certain effect on sorption. Enhancement of the electrostatic attraction between biochar and SMX might also account for the enhanced capacity of SMX at pH < 7, and coexisting ions could decrease the amount of SMX adsorbed onto biochars, mainly because of competition for adsorption sites.

Recent advances in photodegradation of antibiotic residues in water

Antibiotics are widely present in the environment due to their extensive and long-term use in modern medicine. The presence and dispersal of these compounds in the environment lead to the dissemination of antibiotic residues, thereby seriously threatening human and ecosystem health. Thus, the effective management of antibiotic residues in water and the practical applications of the management methods are long-term matters of contention among academics. Particularly, photocatalysis has attracted extensive interest as it enables the treatment of antibiotic residues in an eco-friendly manner. Considerable progress has been achieved in the implementation of photocatalytic treatment of antibiotic residues in the past few years. Therefore, this review provides a comprehensive overview of the recent developments on this important topic. This review primarily focuses on the application of photocatalysis as a promising solution for the efficient decomposition of antibiotic residues in water. Particular emphasis was laid on improvement and modification strategies, such as augmented light harvesting, improved charge separation, and strengthened interface interaction, all of which enable the design of powerful photocatalysts to enhance the photocatalytic removal of antibiotics.

Adsorption of emerging contaminants from water and wastewater by modified biochar: A review

Emerging contaminants (ECs), a group of relatively low-concentration but high-toxicity pollutants in the environment, have attracted widespread attention in recent years. These trace pollutants can be enriched in organisms and finally transferred to human bodies, posing a potential hazard to public health. Biochar, a low-cost and high-efficiency adsorbent, has been used to treat ECs in water. However, due to certain limitations of pristine biochar, such as poor adsorption capacity, narrow adsorption range, and other shortcomings, it is necessary to modify biochar to improve its applications in water treatment for ECs. Currently, there are a lot of reports on the removal of ECs from water by modified biochar. These studies explored different modification methods to functionalize biochar with various physicochemical properties, which resulted in distinct adsorption effects, behaviors and mechanisms of modified biochar on different ECs. There is a need to systematically review and digest the knowledge on the adsorption of ECs on modified biochar. In this review, recent biochar modification methods used in ECs removal are firstly summarized, and the adsorption performance and mechanisms of modified biochar on typical ECs are then systematically reviewed. Finally, the main research directions and trends, as well as recommendations and suggestions for future development are pointed out.

Iron-activated bermudagrass-derived biochar for adsorption of aqueous sulfamethoxazole: Effects of iron impregnation ratio on biochar properties, adsorption, and regeneration

This work focused on the impacts of FeCl₃ impregnation ratio on the properties of FeCl₃-activated bermudagrass (BG)-derived biochars (IA-BCs), adsorption of sulfamethoxazole (SMX) onto IA-BCs and regeneration of SMX-spent IA-BC. Compared with the control BC (85.82 m²/g), IA-BCs made via pyrolysis with FeCl₃ to BG mass ratio between 1 and 3 (1-3 g FeCl₃/g BG) resulted in significantly enhancing surface area (1014-1035 m²/g), hydrophobicity, Fe content in IA-BCs (3.87-7.27%), and graphitized carbon. The properties of IA-BCs supported magnetic separation and higher adsorption (32-265 mg SMX/g BC) than the control BC (6-14 mg SMX/g BC) at various pH. Adsorption experiments indicated various adsorption mechanisms between SMX and IA-BCs via π-π EDA, hydrophobic interactions, and hydrogen bond with intraparticle diffusion limitation. The adsorption was also found to be spontaneous and exothermic. The IA-BC made at FeCl₃ to BG mass ratio of 2 (IA-BC_2.0) showed the maximum adsorption capacity for SMX (253 mg SMX/g BC) calculated from Langmuir isotherm model. Additionally, both NaOH desorption and thermal oxidation showed effective regeneration of SMX-saturated IA-BC_2.0 over multiple cycles. After three cycles of adsorption-regeneration, 64% and 62% of regeneration efficiencies were still achieved under thermal treatment at 300 °C and desorption with 0.1 M NaOH solution, respectively, indicating a cost-efficient adsorbent for the elimination of SMX in water.

Enhanced adsorption of tetracycline by an iron and manganese oxides loaded biochar: Kinetics, mechanism and column adsorption

A Fe/Mn oxides loaded biochar (FeMn-BC) was prepared to enhance the adsorption of tetracycline (TC). γ-Fe₂O₃ and MnO₂ were assigned to the Fe and Mn oxides, respectively. The enhanced adsorption of TC was dominated by the loaded γ-Fe₂O₃ and MnO₂. According to Akaike-Information-Criteria evaluation, Elovich kinetic and Langmuir isotherm models could best describe the adsorption with a maximum capacity of 14.24 mg/g. During adsorption process, the γ-Fe₂O₃ and MnO₂ hydrolyzed into hydroxides (FeOOH and MnOOH) which acted as bases to complex with TC^2- ion under alkaline condition (pH = 11). After the adsorption, the concentrations of leached Fe and Mn could meet the requirements PRC standards GB13456-2012 and GB8978-1996, respectively. The FeMn-BC had ~24% on TC removal (initial concentration of 20 mg/L) after four-cycles regeneration. The FeMn-BC was also available for TC adsorptions in column tests and actual wastewater.

Effective removal of carbamazepine and diclofenac by CuO/Cu2O/Cu-biochar composite with different adsorption mechanisms

In this study, the CuO/Cu₂O/Cu-biochar composite (CBC) was fabricated by calcining Cu²⁺-loaded cauliflower root at 500 °C. The CBC displayed the higher specific surface area and total pore volume than raw biochar, which attributed to Cu²⁺ acting as a pore-forming agent in the synthesis process. The adsorption experiments indicated that CBC could remove 88.96% diclofenac and 93.02% carbamazepine, which was nearly double higher than the raw biochar. The film diffusion mainly controlled the adsorption rate. Meanwhile, the common adsorption mechanisms for two pollutants were deemed to hydrogen-bonding interaction, π-π interaction and micropore filling effect, and copper oxide particles providing more adsorption sites. In addition, the adsorption of diclofenac involved electrostatic attraction. Lastly, the higher adsorption capacity of carbamazepine than diclofenac on CBC was mainly attributed to two mechanisms: Lewis acid-base interaction enhancing the adsorption of carbamazepine and size exclusion effect reducing the adsorption of diclofenac. Therefore, the study provided a possible method that Cu-contaminated biomass converted to CuO/Cu₂O/Cu-biochar, which could achieve win-win results.

Macro, colloidal and nanobiochar for oxytetracycline removal in synthetic hydrolyzed human urine

Macro (BC), colloidal (CBC) and nanobiochar (NBC) were examined for the particle size effect for adsorptive removal of oxytetracycline (OTC) and co-occurring nutrients, which are present in synthetic hydrolyzed human urine. The surface morphologies and functionality of biochars were characterized using Scanning Electron Microscopy (SEM), Brunauer-Emmett-Teller (BET) specific surface area and Fourier Transform Infra-Red (FTIR) Spectroscopy. Experiments for the removal of OTC were performed at the natural pH (pH 9.0) of hydrolyzed human urine using solid-solutions of 3 types of chars (1 g/L) with a contact time of 5 h, at initial OTC concentration of 50 mg/L where isotherm experiments were investigated with OTC concentrations from 25 to 1000 mg/L. The highest maximum adsorption capacity of 136.7 mg/g was reported for CBC, while BC reported slightly low value (129.34 mg/g). Interestingly, NBC demonstrated a two-step adsorption process with two adsorption capacities (16.9 and 113.2 mg/g). Colloidal biochar depicted the highest adsorption for NH₄⁺, PO₄^3-, and SO₄^2- nutrients. All 3 types of chars showed strong retention with a poor desorption (6% in average) of OTC in synthetic hydrolyzed urine medium. CBC and NBC demonstrated both physisorption and chemisorption, whereas the OTC removal by BC was solely via physisorption. Nevertheless, CBC biochar demonstrated the best performance in adsorptive removal of OTC and nutrients in hydrolyzed human urine and its capability towards wastewater treatment. As the removal of nutrients were low, the treated urine can possibly be used as a safe fertilizer.

Biochar affects the dissipation of antibiotics and abundance of antibiotic resistance genes in pig manure

Manure from medicated livestock contains pharmaceutical antibiotics and antibiotic resistance genes (ARGs). Bioavailable antibiotics trigger further ARGs amplification during manure storage. It was tested whether biochar lowers the bioavailability of the antibiotics sulfamethazine (SMZ), ciprofloxacin (CIP), oxytetracycline (OTC) and florfenicol (FF) in manure and the amplification of sul1 and tet(W) ARGs. To that end, liquid pig manure was treated with 5% (w/w) pinecone biochar (BCP). Antibiotics dissipated during 30-d incubation in the order SMZ < OTC < CIP < FF. Added BCP further immobilized SMZ, OTC and CIP, while the effect was not significant for FF. Both sul1 and tet(W) ARGs copy numbers significantly increased by factors of 5.8 and 2.5, respectively, in OTC and SMZ spiked manure. The abundance of sul1 was significantly decreased in BCP amended manure, while the impact on tet(W) was less. Consequently, biochar is suitable for the management of antibiotics contaminated manure during storage.

Unraveling influence of metal species on norfloxacin removal by mesoporous metallic silicon adsorbent

Metal-modified adsorbent had appreciable adsorption capacity and fast rate toward norfloxacin (NOR), but limited studies focused on the influence of metal species on adsorbents' performance. In this study, Fe and Cu were chosen to be loaded on mesoporous silicon SBA-15 for absorbing NOR and investigating the key function of metal species. An obvious synergy effect was found between active species and supporter. A high adsorption capacity (44.8 mg g^-1 for Fe/SBA-15 and 78.3 mg g^-1 for Cu/SBA-15) and short equilibration time (< 2 h) were obtained. NOR adsorptions on two processes were described well by pseudo-second-order kinetics, particle diffusion equation, and Langmuir isotherm. The adsorption processes were spontaneous, but NOR adsorption on Cu/SBA-15 was endothermic while its adsorption on Fe/SBA-15 was exothermic. HA had dual effect on the adsorption efficiency, with a promotion at low HA concentration but an inhibition at high concentration. NOR removal increased first and then decreased with pH ascension from 3 to 9 for both Fe/SBA-15 and Cu/SBA-15, achieving maximum at pH = 7. Comparative characterizations and experiments suggested that NOR adsorption processes were dominated by electrostatic interactions, n-π EDA interactions, hydrogen bonds, and surface complex. The greater n-π EDA and complex efficiency of Cu with NOR resulted in the superior performance of Cu/SBA-15. Graphical abstract.

Singlet oxygen mediated the selective removal of oxytetracycline in C/Fe3C/Fe0 system as compared to chloramphenicol

Reactive oxygen species (ROS) production for Fe⁰ is limited because of the formed iron corrosion products. In this study, C/Fe₃C/Fe⁰ composite which produces enhanced ROS has been specifically designed and fabricated to remove typical antibiotics (i.e., oxytetracycline (OTC) and chloramphenicol (CAP)) as a heterogeneous Fenton-like catalyst. The C/Fe₃C/Fe⁰ composite demonstrated excellent performance for both OTC and CAP removal as compared with Fe⁰ and biochar. Furthermore, X-ray photoelectron spectrometry, Fourier transform infrared spectrometry, high performance liquid chromatography-mass spectra and electron spin resonance analyses were conducted to elucidate the adsorption and degradation mechanisms. The adsorption of OTC and CAP was mainly dominated by H bonds and the electron-acceptor-acceptor on the surface of the C/Fe₃C/Fe⁰ composite, respectively. In particular, OH simultaneously induced the degradation of OTC and CAP, while ¹O₂ presented the selective oxidation to OTC. More specifically, the degradation of OTC over C/Fe₃C/Fe⁰ was stronger and faster than that of CAP, leading to 65.84% and 16.84% of removal efficiency for OTC and CAP, respectively. Furthermore, C/Fe₃C/Fe⁰ exhibited superior reusability and stability after regeneration, but regenerated Fe⁰ almost lost its reactivity. Therefore, the efficiency in situ generation of ¹O₂ using C/Fe₃C/Fe⁰ would shed new light on the selective oxidation of aqueous organic compounds.

Adsorption characteristics and mechanism of norfloxacin in water by γ-Fe2O3@BC

Using waste pomelo peel as raw material, pomelo peel-based biochar (BC) was prepared by pyrolysis at 400 °C, and the pomelo peel-based biochar was prepared by loading γ-Fe₂O₃ onto the surface of the pomelo peel-based biochar by unlimited oxygen chemical precipitation. The results showed that the pomelo peel biochar loaded with γ-Fe₂O₃ had higher specific surface area and larger pore volume. The load of γ-Fe₂O₃ gives γ-Fe₂O₃@BC excellent magnetic separation ability, and its magnetic saturation intensity is as high as 30.60 emu/g. BC and γ-Fe₂O₃@BC were applied to remove norfloxacin (NOR) from a water body. It was found that the adsorption of NOR by both of them followed the pseudo-second-order kinetic model. The adsorption isotherm mainly conforms to the Sips model, and the adsorption process of NOR is a spontaneous endothermic reaction. The pH and ionic strength have a great influence on the adsorption of NOR by BC and γ-Fe₂O₃@BC, and they play a role mainly by influencing the morphology of NOR in water. The adsorption mechanism showed that cation exchange and hydrogen bonding were the main forces for BC to adsorb NOR. Moreover, the γ-Fe₂O₃ particles enhanced the hydrophobicity of the pomelo peel-based biochar, making the hydrophobicity become the main force for the adsorption of NOR by the γ-Fe₂O₃@BC. The adsorption-desorption experiment showed that after four cycles of recycling, the adsorption capacity of γ-Fe₂O₃@BC for NOR was still up to 61.43% of the initial adsorption capacity, and it had a good recycling property.

Chemical Activation of Forage Grass-Derived Biochar for Treatment of Aqueous Antibiotic Sulfamethoxazole

Chemically activated forage Bermudagrass-derived biochar (A-BC) was produced, characterized, and utilized for adsorption of sulfamethoxazole (SMX) in water for the first time. After NaOH activation, A-BC showed a higher surface area (1991.59 m2/g) and maximum adsorption capacity for SMX (425 mg SMX/g BC) than those of various biochars and commercial activated carbons. The detailed analysis for adsorption of SMX onto A-BC indicated the efficient sorption of SMX through π-π EDA and hydrophobic and hydrogen bond interactions. Additionally, the adsorption of SMX on A-BC was limited by pore and liquid film diffusions. The SMX adsorption on A-BC was found to be endothermic and spontaneous from thermodynamic studies. Furthermore, the highly efficient regeneration of SMX-saturated A-BC over multiple cycles was achieved by NaOH-driven desorption, indicating that the adsorption of SMX onto A-BC would have high potential for cost-effective solution for elimination of SMX from water.

Feasibility study on a new pomelo peel derived biochar for tetracycline antibiotics removal in swine wastewater

Removal of tetracycline antibiotics (TCs) by biochar adsorption is emerging as a cost-effective and environmentally friendly strategy. This study developed a novel pomelo peel derived biochar, which was prepared at 400 °C (BC-400) and 600 °C (BC-600) under nitrogen conditions. To enhance the adsorption capacity, BC-400 was further activated by KOH at 600 °C with a KOH: BC-400 ratio of 4:1. The activated biochar (BC-KOH) displayed a much larger surface area (2457.37 m²/g) and total pore volume (1.14 cm³/g) than BC-400 and BC-600. High adsorption capacity of BC-KOH was achieved for removing tetracycline (476.19 mg/g), oxytetracycline (407.5 mg/g) and chlortetracycline (555.56 mg/g) simultaneously at 313.15 K, which was comparable with other biochars derived from agricultural wastes reported previously. The adsorption data could be fitted by the pseudo-second-order kinetic model and Langmuir isotherm model successfully. The initial solution pH indicated the potential influence of TCs adsorption capacity on BC-KOH. These results suggest that pore filling, electrostatic interaction and π-π interactions between the adsorbent and adsorbate may constitute the main adsorption mechanism. BC-KOH can be used as a potential adsorbent for removing TCs from swine wastewater effectively, cheaply and in an environmentally friendly way.

Characteristics and applications of biochar for remediating Cr(VI)-contaminated soils and wastewater

Chromium (Cr) is a common environmental contaminant due to industrial processes and anthropogenic activities such as mining of chrome ore, electroplating, timber treatment, leather tanning, fertilizer and pesticide, etc. Cr exists mainly in both hexavalent [Cr(VI)] and trivalent [Cr(III)] form, being Cr(VI) with non-degradability and potential to be hidden, thereby affecting surrounding environment and being toxic to human health. Therefore, researches on remediation of Cr pollution in the environment have received much attention. Biochar is a low-cost adsorbent, which has been identified as a suitable material for Cr(VI) immobilization and removal from soil and wastewater. This review incorporates existing literature to provide a detailed examination into the (1) Cr chemistry, the source and current status of Cr pollution, and Cr toxicity and health; (2) feedstock and characterization of biochar; (3) processes and mechanisms of immobilization and removal of Cr by biochar, including oxidation-reduction, electrostatic interactions, complexation, ion exchange, and precipitation; (4) applications of biochar for Cr(VI) remediation and the modification of biochar to improve its performance; (5) factors affecting removal efficiency of Cr(VI) with respect to its physico-chemical conditions, including pH, temperature, initial concentration, reaction time, biochar characteristics, and coexisting contaminants. Finally, we identify current issues, challenges, and put forward recommendations as well as proposed directions for future research. This review provides a thorough understanding of using biochar as an emerging biomaterial adsorbent in Cr(VI)-contaminated soils and wastewater.

Critical study of crop-derived biochars for soil amendment and pharmaceutical ecotoxicity reduction

In this study, biochars (BCs) produced from crops (straw and seeds) were tested for the applicability as additive to soils. The effect on pH, water capacity and cation exchange capacity of soil were tested. The ability for the sorption of pharmaceuticals (beta-blockers, anti-inflammatory drugs, sulfonamides, 17α-ethinylestradiol, carbamazepine, caffeine) using the batch sorption test was performed, and the effect of water pH was investigated. In addition, the metals removed from the biochar was analyzed as a potential toxicity factor. The mechanism of adsorption (Langmuir, Freundlich) was tested for sulfadimetoxine. The effect of the rye-derived biochar on water cress germination and the reduction of the sulfonamides toxicity to this plant was tested. The advantages of crop-derived biochar application to different soils (sand soil, clay soil and reference soil) was presented. It was found that tested BCs effectively increase the water capacity of soils, especially sand type soil, but in the same time it had increase the pH of pure-buffering soils. The driving force of pharmaceutical sorption was its ionization form - the highest sorption occurs for cations, medium for neutral forms, while the lowest sorption for anions. The opposite situation have been noted for desorption from biochar. The washing of biochars increases sorption for the neutral and anionic species, but not for the cations. The application of biochars into the soils can from one site protect the plants from toxic impact of sulfonamides, but from the other hamper the root prolongation by the pH increase.

Carbon nanotube supported sludge biochar as an efficient adsorbent for low concentrations of sulfamethoxazole removal

A novel adsorbent of sludge biochar (SBC) and multi-walled carbon nanotube (CNT) composite was synthesized (CNT-SBC) to remove low concentrations of sulfamethoxazole (SMX) from water. The key factors of dose, contact time, pH and temperature were investigated. Higher dose of adsorbents provided more active sites for SMX adsorption. The effect of pH was due to the electrostatic interaction. Increasing the temperature was beneficial to SMX adsorption, which was a spontaneous endothermic process and the strength of the spontaneous increased with CNT supporting. As pseudo-second-order, Elovich, Langmuir and Freundlich models fitted the experimental data better, this suggested that both physisorption and chemisorption played vital roles during the adsorption process. In addition, liquid film diffusion was the main rate-limiting step of adsorption. Compared with SBC (5.43 × 10³ μg g^-1), CNT-SBC-1 (CNT:SBC = 1:2), CNT-SBC-2 (CNT:SBC = 1:4) and CNT-SBC-3 (CNT:SBC = 1:6) exhibited better adsorption performance with up to 2.35 × 10⁴, 1.49 × 10⁴ and 1.22 × 10⁴ μg g^-1 at 25 °C, respectively. The characterization analysis demonstrated that the stronger adsorption capacity of CNT-SBC was mainly attributed to the pore filling, functional groups complexation and π-π interaction. In summary, as an efficient and environment-friendly adsorbent, CNT-SBC has promising potential for low concentrations of SMX and other emerging contaminants removal from water.