Inflammation targeted chitosan-based hydrogel for controlled release of diclofenac sodium

A pH-sensitive drug delivery using biodegradable succinoglycan/chitosan hydrogels with synergistic antibacterial activity

Since succinoglycan (SG) produced by Sinorhizobium meliloti is an anionic polysaccharide having substituents such as succinate and pyruvate groups, a polyelectrolyte composite hydrogel can be made together with chitosan (CS), a cationic polysaccharide. We fabricated polyelectrolyte SG/CS hydrogels using the semi-dissolving acidified sol-gel transfer (SD-A-SGT) method. The hydrogel showed optimized mechanical strength and thermal stability at an SG:CS weight ratio of 3:1. This optimized SG/CS hydrogel exhibited a high compressive stress of 497.67 kPa at 84.65 % strain and a high tensile strength of 9.14 kPa when stretched to 43.73 %. Additionally, this SG/CS hydrogel showed a pH-controlled drug release pattern for 5-fluorouracil (5-FU), where a change from pH 7.4 to 2.0 increased the release from 60 % to 94 %. In addition, this SG/CS hydrogel not only showed a cell viability of 97.57 %, but also showed synergistic antibacterial activity of 97.75 % and 96.76 % against S. aureus and E. coli, respectively. These results indicate the potential of this hydrogel as a biocompatible and biodegradable hydrogel material for wound healing, tissue engineering, and drug release systems.

Engineered Highly Porous Polyvinyl Alcohol Hydrogels with Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Graphene Nanosheets for Musculoskeletal Tissue Engineering: Morphology, Water Sorption, Thermal, Mechanical, Electrical Properties, and Biocompatibility

Electroactive composite materials are very promising for musculoskeletal tissue engineering because they can be applied in combination with electrostimulation. In this context, novel graphene-based poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/polyvinyl alcohol (PHBV/PVA) semi-interpenetrated networks (semi-IPN) hydrogels were engineered with low amounts of graphene (G) nanosheets dispersed within the polymer matrix to endow them with electroactive properties. The nanohybrid hydrogels, obtained by applying a hybrid solvent casting-freeze-drying method, show an interconnected porous structure and a high water-absorption capacity (swelling degree > 1200%). The thermal characterization indicates that the structure presents microphase separation, with PHBV microdomains located between the PVA network. The PHBV chains located in the microdomains are able to crystallize; even more after the addition of G nanosheets, which act as a nucleating agent. Thermogravimetric analysis indicates that the degradation profile of the semi-IPN is located between those of the neat components, with an improved thermal stability at high temperatures (>450 °C) after the addition of G nanosheets. The mechanical (complex modulus) and electrical properties (surface conductivity) significantly increase in the nanohybrid hydrogels with 0.2% of G nanosheets. Nevertheless, when the amount of G nanoparticles increases fourfold (0.8%), the mechanical properties diminish and the electrical conductivity does not increase proportionally, suggesting the presence of G aggregates. The biological assessment (C2C12 murine myoblasts) indicates a good biocompatibility and proliferative behavior. These results reveal a new conductive and biocompatible semi-IPN with remarkable values of electrical conductivity and ability to induce myoblast proliferation, indicating its great potential for musculoskeletal tissue engineering.

An Appraisal of pH triggered Bacitracin drug release, through composite hydrogel systems

Comparative investigations on environmentally triggered drug delivery and wound healing characteristics of flexible hydrogel composites, Chitosan-Gelatin (C/G) and 2-Hydroxyethyl Methacrylate-Gelatin (H/G); are presented here. These composites, prepared through facile synthesis and curing methods, indicate the potential to smartly respond to the pH changes in wounds by releasing drug simultaneously and aiding in faster healing. An in-vitro investigation of the composite characteristics were included testing for Equilibrium Water Capacity Studies, Fourier Transform Infrared Spectroscopy (FTIR) investigations as well as UV based drug release and gravimetric hydrogel degradation profiles. This was followed by cutaneous application testing of the hydrogel systems in balb-c mice. Observations and testing results indicated the potential applicability of the hydrogel systems as dressings for topical/transdermal applications, provided that further detailed in-vivo characteristics are accounted for.

Controlled release of curcumin from gelatin hydrogels by the molecular-weight modulation of an oxidized dextran cross-linker

Controlled drug delivery could minimize side effects while maintaining a high local dose. Herein, a hydrogel carrier was prepared by forming dynamic imine bonds between gelatin and oxidized dextran (ODex) of different molecular weights (Mw = 10, 70, and 150 kDa). The morphology, thermal stability, rheology, mechanical properties, and swelling properties of the hydrogels and the controlled release of curcumin were characterized. When dextran with a higher Mw was used, the ODex contained more aldehyde groups, which led to a higher degree of cross-linking, considerably shorter gel time, decreased hydrogel porosity, and well-controlled release of curcumin. In addition, the cross-linked hydrogels exhibited not only high thermal stability but also excellent mechanical properties. However, because the matrix was hydrophilic, the swelling properties of the hydrogels were not significantly affected by the Mw of ODex. These observations suggest an approach for designing nutrient delivery carriers with improved controlled release.

Swelling induced mechanically tough starch-agar based hydrogel as a control release drug vehicle for wound dressing applications

In recent years, polysaccharide-based hydrogels have received increased attention due to their inherent biodegradability, biocompatibility, and non-toxicity. The feasibility of using polysaccharides for the synthesis of hydrogels is dependent on their noteworthy mechanical strength and cell compatibility, which are required for practical applications, especially for biomedical uses. In this study, we demonstrate a facile synthetic route for the construction of a mechanically tough, biocompatible, and biodegradable hydrogel using polysaccharides such as starch and agar. A synthetic monomer-free hydrogel was synthesized using epichlorohydrin as a cross-linker, and a mechanical strength of 9.49 ± 1.29-6.16 ± 0.37 MPa was achieved. The introduction of agar into the hydrogel resulted in agar dose-dependent swelling-induced mechanical strength. Moreover, along with incredible mechanical strength, the hydrogel also exhibited prominent cell viability against human embryonic kidney cells. In addition, the hydrogel showed good encapsulation efficiency for antibacterial drugs like ciprofloxacin hydrochloride hydrate, with controlled releasing ability over a sustained period. The antibacterial activity of the encapsulated drug was observed against Staphylococcus aureus and Bacillus subtilis bacterial strains. Thus, the studied hydrogel with loaded drug exhibited all the required qualities to be utilized as a promising candidate in wound dressing applications.

Assessment of synthesized chitosan/halloysite nanocarrier modified by carbon nanotube for pH-sensitive delivery of curcumin to cancerous media

Constructing a system to carry medicine for more effective remedy of cancer has been a leading challenge, as the number of cancer cases continues to increase. In this present research, a curcumin-loaded chitosan/halloysite/carbon nanotube nanomixture was fabricated by means of water/oil/water emulsification method. The drug loading efficiency (DL) and entrapment efficiency (EE), as a result, reached 42 % and 88 %, respectively and FTIR and XRD analysis confirmed the bonding between the drug and nanocarrier. Morphological observation through FE-SEM and characterization through DLS analysis demonstrated that the average size of nanoparticles is 267.37 nm. Assessment of release within 96 h in pH 7.4 and 5.4 showed sustained release. For more investigation, release data was analyzed by diverse kinetic models to understand the mechanism in the release procedure. An MTT assay was also carried out, and the results illustrated apoptosis induction on MCF-7 cells and exhibited ameliorated cytotoxicity of the drug-loaded nanocomposite compared to the free curcumin. These findings suggest that the unique pH-responsive chitosan/halloysite/carbon nanotube nanocomposite might make a good option for drug delivery systems, particularly for the cancer treatment.

Self-cross-linked starch/chitosan hydrogel as a biocompatible vehicle for controlled release of drug

A facile one-pot approach was adopted to prepare a polysaccharide-based hydrogel of oxidized starch (OS)-chitosan. The synthetic monomer-free, eco-friendly hydrogel was prepared in an aqueous solution and employed for controlled drug release application. The starch was first oxidized under mild conditions to prepare its bialdehydic derivative. Subsequently, the amino group-containing a modified polysaccharide, "chitosan" was introduced on the backbone of OS via a dynamic Schiff-base reaction. The bio-based hydrogel was obtained via a one-pot in-situ reaction, where functionalized starch acts as a macro-cross-linker that contributes structural stability and integrity to the hydrogel. The introduction of chitosan contributes stimuli-responsive properties and thus pH-sensitive swelling behavior was obtained. The hydrogel showed its potential as a pH-dependent controlled drug release system and a maximum of 29 h sustained release period was observed for ampicillin sodium salt drug. In vitro studies confirmed that the prepared drug-loaded hydrogels showed excellent antibacterial ability. Most importantly, the hydrogel could find potential use in the biomedical field due to its facile reaction conditions, biocompatibility along with the controlled releasing ability of the encapsulated drug.

Multi-responsive chitosan-based hydrogels for controlled release of vincristine

As medical research progresses, the derivation and development of biological materials such as hydrogels have steadily gained more interest. The biocompatibility and non-toxicity of chitosan make chitosan hydrogels potential carriers for drug delivery. This work aims to develop two multi-reactive, safe, and highly swellable bio-hydrogels consisting of chitosan-graft-glycerol (CS-g-gly) and carboxymethyl chitosan-graft-glycerol (CMCS-g-gly), for sustained and controlled drug release, improved bioavailability along with entrapment in nanocarriers, which reduces side effects of vincristine sulphate. CS-g-gly and CMCS-g-gly are successfully prepared and fully characterized using analytical techniques. Under various conditions, the prepared hydrogels exhibit a high swelling ratio. Vincristine-loaded CS-g-gly (VCR/CS-g-gly), and CMCS-g-gly (VCR/CMCS-g-gly) show high encapsulation efficiency between 72.28-89.97%, and 56.97-71.91%, respectively. VCR/CS-g-gly show a sustained release behavior, and the maximum release of VCR from hydrogels reached 82% after 120 h of incubation. MCF-7 (breast cancer cell line) and MCF-10 (normal breast cell line) are evaluated for cell viability and apoptosis induction. The in-vitro anti-tumor efficacy is investigated using flow cytometry. The tetrazolium-based MTT assay of hydrogels shows no evidence of significant cytotoxicity in MCF-7 and MCF-10 cells. According to these findings, these hydrogels can effectively deliver drugs to MCF-7 and other breast cancer cells.

A pH responsive and superporous biocomposite hydrogel of Salvia spinosa polysaccharide-co-methacrylic acid for intelligent drug delivery

Herein, a drug delivery system (SSH-co-MAA) based on the mucilage from seeds of Salvia spinosa (SSH; polymer) and methacrylic acid (MAA; monomer) is introduced for the controlled delivery of venlafaxine HCl using a sustainable chemical approach. The optimized conditions for the designing of the ideal formulation (M4) of SSH-co-MAA were found to be 2.5% (w/w) of SSH, 30.0% (w/w) of MAA, 0.4% (w/w) of both N,N'-methylene-bis-acrylamide (MBA; cross-linker) and potassium persulfate (KPS; initiator). The structure characterization of SSH-co-MAA by Fourier transform infrared and solid-state CP/MAS ¹³C-NMR spectroscopy has confirmed the grafting of MAA onto SSH. The thermogravimetric analysis revealed that SSH-co-MAA is a stable entity before and after loading of the venlafaxine HCl-loaded SSH-co-MAA (VSSH-co-MAA). Scanning electron microscopy images of SSH-co-MAA after swelling then freeze drying showed the superporous nature of the hydrogel. The gel fraction (%) of SSH-co-MAA depended upon concentration of SSH, MAA, and MBA. The porosity (%) was increased with the increase in the concentration of SSH and decreased with the decrease in the concentration of MAA and MBA. The swelling indices, venlafaxine HCl loading, and release (24 h at the pH of the gastrointestinal tract) from VSSH-co-MAA were found to be dependent on the pH of the swelling media and the concentration of SSH, MAA, and MBA. The release of venlafaxine HCl followed non-Fickian diffusion mechanism. Conclusively, SSH-co-MAA is a novel material for potential application in targeted drug delivery applications.

Chitin-Glucan Complex Hydrogels: Physical-Chemical Characterization, Stability, In Vitro Drug Permeation, and Biological Assessment in Primary Cells

Chitin-glucan complex (CGC) hydrogels were fabricated by coagulation of the biopolymer from an aqueous alkaline solution, and their morphology, swelling behavior, mechanical, rheological, and biological properties were studied. In addition, their in vitro drug loading/release ability and permeation through mimic-skin artificial membranes (Strat-M) were assessed. The CGC hydrogels prepared from 4 and 6 wt% CGC suspensions (Na5₁*⁴ and Na5₁*⁶ hydrogels, respectively) had polymer contents of 2.40 ± 0.15 and 3.09 ± 0.22 wt%, respectively, and displayed a highly porous microstructure, characterized by compressive moduli of 39.36 and 47.30 kPa and storage moduli of 523.20 and 7012.25 Pa, respectively. Both hydrogels had a spontaneous and almost immediate swelling in aqueous media, and a high-water retention capacity (>80%), after 30 min incubation at 37 °C. Nevertheless, the Na5₁*⁴ hydrogels had higher fatigue resistance and slightly higher-water retention capacity. These hydrogels were loaded with caffeine, ibuprofen, diclofenac, or salicylic acid, reaching entrapment efficiency values ranging between 13.11 ± 0.49% for caffeine, and 15.15 ± 1.54% for salicylic acid. Similar release profiles in PBS were observed for all tested APIs, comprising an initial fast release followed by a steady slower release. In vitro permeation experiments through Strat-M membranes using Franz diffusion cells showed considerably higher permeation fluxes for caffeine (33.09 µg/cm²/h) and salicylic acid (19.53 µg/cm²/h), compared to ibuprofen sodium and diclofenac sodium (4.26 and 0.44 µg/cm²/h, respectively). Analysis in normal human dermal fibroblasts revealed that CGC hydrogels have no major effects on the viability, migration ability, and morphology of the cells. Given their demonstrated features, CGC hydrogels are very promising structures, displaying tunable physical properties, which support their future development into novel transdermal drug delivery platforms.

Curcumin loaded hydrogel with anti-inflammatory activity to promote cartilage regeneration in immunocompetent animals

Stable cartilage regeneration in immunocompetent animals remains a huge challenge, mainly ascribing to the in vivo implantation of tissue-engineered cartilage inevitably arousing inflammatory reactions, resulting in cartilage-specific extracellular matrix erosion, chondrogenic niche destruction, and chondrocyte deterioration. Herein, we developed an anti-inflammatory platform, namely, Cur/GelMA hydrogel, by loading a potent anti-inflammatory drug of curcumin (Cur) into gelatin methacryloyl (GelMA) hydrogel. The Cur/GelMA hydrogel exhibited satisfactory Cur release kinetics in vitro and exerted favorable anti-inflammatory effects when cocultured with lipopolysaccharide-induced RAW264.7 macrophages in vitro. Furthermore, the Cur/GelMA hydrogel showed gratifying biocompatibility and supported cartilage regeneration in vitro when colonized with rabbit- and goat-derived chondrocytes. In addition, the in vitro engineered cartilages in the Cur/GelMA hydrogel were able to maintain a cartilaginous phenotype and achieved stable cartilage regeneration when subcutaneously implanted in autologous rabbits and goats for 2 and 4 weeks compared to the GelMA hydrogel. Furthermore, our data revealed that the in vivo-generated cartilage in the Cur/GelMA group apparently alleviated the inflammatory reaction compared to its GelMA counterpart, suggesting that the locally released Cur endowed the Cur/GelMA hydrogel with potent anti-inflammatory capacity. This study provides a reliable anti-inflammatory platform for stable cartilage regeneration in immunocompetent animals, significantly advancing the clinical application of tissue-engineered cartilage.

Preparation and Characterization of Chitosan/LDH Composite Membranes for Drug Delivery Application

In this study, composite membranes based on chitosan (CS), layered double hydroxide (LDH), and diclofenac were prepared via dispersing of LDH and diclofenac (DCF) in the chitosan matrix for gradual delivery of diclofenac sodium. The effect of using LDH in composites was compared to chitosan loaded with diclofenac membrane. LDH was added in order to develop a system with a long release of diclofenac sodium, which is used in inflammatory conditions as an anti-inflammatory drug. The prepared composite membranes were characterized by Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscope Analysis (SEM), X-ray Photoelectron Spectroscopy (XPS), Thermogravimetric Analysis (TGA) and UV-Vis Spectroscopy. The results of the FTIR and XPS analyses confirmed the obtaining of the composite membrane and the efficient incorporation of diclofenac. It was observed that the addition of LDH can increase the thermal stability of the composite membrane and favors the gradual release of diclofenac, highlighted by UV-Vis spectra that showed a gradual release in the first 48 h. In conclusion, the composite membrane based on CS-LDH can be used in potential drug delivery application.

Chitosan-based nanoscale systems for doxorubicin delivery: Exploring biomedical application in cancer therapy

Green chemistry has been a growing multidisciplinary field in recent years showing great promise in biomedical applications, especially for cancer therapy. Chitosan (CS) is an abundant biopolymer derived from chitin and is present in insects and fungi. This polysaccharide has favorable characteristics, including biocompatibility, biodegradability, and ease of modification by enzymes and chemicals. CS-based nanoparticles (CS-NPs) have shown potential in the treatment of cancer and other diseases, affording targeted delivery and overcoming drug resistance. The current review emphasizes on the application of CS-NPs for the delivery of a chemotherapeutic agent, doxorubicin (DOX), in cancer therapy as they promote internalization of DOX in cancer cells and prevent the activity of P-glycoprotein (P-gp) to reverse drug resistance. These nanoarchitectures can provide co-delivery of DOX with antitumor agents such as curcumin and cisplatin to induce synergistic cancer therapy. Furthermore, co-loading of DOX with siRNA, shRNA, and miRNA can suppress tumor progression and provide chemosensitivity. Various nanostructures, including lipid-, carbon-, polymeric- and metal-based nanoparticles, are modifiable with CS for DOX delivery, while functionalization of CS-NPs with ligands such as hyaluronic acid promotes selectivity toward tumor cells and prevents DOX resistance. The CS-NPs demonstrate high encapsulation efficiency and due to protonation of amine groups of CS, pH-sensitive release of DOX can occur. Furthermore, redox- and light-responsive CS-NPs have been prepared for DOX delivery in cancer treatment. Leveraging these characteristics and in view of the biocompatibility of CS-NPs, we expect to soon see significant progress towards clinical translation.

Molecular dynamics simulation of hyaluronic acid hydrogels: Effect of water content on mechanical and tribological properties

BACKGROUND AND OBJECTIVE

Recently conducted biomedical studies have shown that the drug diffusivity of hyaluronic acid hydrogel plays an important role in the treatment of joint diseases. The drug diffusivity is closely related to the water content of hydrogel. In addition, different water content will not only affect its mechanical and tribological properties, but also change the effect of drug release.

METHODS

In this work, a Molecular dynamics simulation was used to investigate the effect of water content on spatial distribution, tribological and mechanical properties of a hyaluronic acid hydrogel network. This paper focuses on the analysis and calculation of the radial distribution function of 20, 40, 60, and 80% water content model and the friction force and mechanical parameters under the influence of different load and friction speed.

RESULTS

The results show that at 20 and 40% water content, the spatial distribution is loose and the intermolecular force is not strong, resulting in a major lack in tribological and mechanical properties; whereas at 60 and 80% water content, the spatial distribution becomes gradually compact and the intermolecular force is gradually increased. The tribological and mechanical properties manifest a marked improvement.

CONCLUSIONS

The calculations reveal that the hydrogel model has the best wear resistance, pressure resistance, and plastic deformation resistance at 80% water content. In the range of 20-80% water content, the mechanical properties and friction properties of hydrogels become better and better with the increase of water content.

Adsorption of Non-Steroidal Anti-Inflammatory Drugs on Alginate-Carbon Composites-Equilibrium and Kinetics

In this work, alginate-carbon composites with different active carbon content were synthesized and studied by various techniques. The obtained materials can be used as adsorbents in the processes of removing organic pollutants from water. In this study, the effect of the immobilization of activated carbon in calcium alginate was investigated. Textural properties were determined by measuring low-temperature nitrogen adsorption/desorption isotherms. The largest specific surface area was recorded for ALG_C8 and amounted to 995 m2/g. The morphology of alginate materials was determined on the basis of scanning electron microscopy. The adsorption properties were estimated based on the measurements of equilibrium and adsorption kinetics. The highest sorption capacities were 0.381 and 0.873 mmol/g for ibuprofen and diclofenac, respectively. The generalized Langmuir isotherm was used to analyze the equilibrium data. A number of equations and kinetic models were used to describe the adsorption rate data, including first (FOE) and second (SOE) order kinetic equations, 1,2-mixed-order kinetic equation (MOE), fractal-like MOE equation (f-MOE), multi-exponential equation (m-exp), in addition to diffusion models: intraparticle diffusion model (IDM) and pore diffusion model (PDM). Thermal stability was determined on the basis of data from thermal analysis in an atmosphere of synthetic air.

Preparation, physicochemical and application evaluation of raspberry anthocyanin and curcumin based on chitosan/starch/gelatin film

Raspberry anthocyanin (RA) from Rubus idaeus L. (Rosaceae) and curcumin (Cur) from Curcuma longa L. (Zingiberaceae) can effectively improve the physicochemical properties of composite films, and as bioactive pigment components, they can impart pH-responsive properties to the film. In this study, RA and Cur were added to chitosan/starch/gelatin composite film (CSG) to prepare CSG-RA, CSG-Cur, CSG-RA/Cur₈₂ and CSG-RA/Cur₇₃ color films by solution casting method. The color films could change color under different pH conditions and had higher antioxidant activities using ABTS (2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid)) assay. The results from fourier transform infrared spectroscopy and scanning electron microscopy showed that RA and Cur were well dispersed in the CSG matrix and improved the structure of the composite films. The hydrophobic Cur increased the tensile strength from 6 Mpa (CSG) to 14 Mpa (CSG-Cur), but reduced the elongation at break from 55 % (CSG) to 40 % (CSG-Cur). These color films had a good fresh-keeping effect and freshness monitoring, in particular, CSG-RA/Cur₇₃, had the better opacity, water solubility, thickness, moisture content and water vapor permeability than the other films. Briefly, binary pigment films had the potential to become a pH-sensitive indicator/packing film.

Synthesis and Characterization of a Biodegradable and Robust Film Using Gracilarialichenoides and Sargassumhorneri for Packaging Applications

In this study, a biodegradable and mechanically robust film was synthesized using seaweeds (Gracilarialichenoides and Sargassumhorneri), and its physicochemical and mechanical properties were characterized. In addition, its applicability in the packaging area was studied. A synthetic process including cleaning, drying, softening, pulping, and forming was developed. The microscopic morphology of the developed biodegradable film was similar to wood-based paper. In order to characterize its chemical composition and structure, FE-SEM, FT-IR, GC-MS, and TGA analyses have been performed. In addition, an aerobic biodegradability test was performed in accordance with ISO 14855-1:2012. From those experimental studies, it was shown that the major ingredient of the developed material is cellulose and other bio-originated organic substances. The developed seaweed-based film has excellent biodegradability which is 17 times higher than biodegradable polybutylene succinate (PBSe, hereafter) film, and seven times higher than other seaweed-based film in literature. The tensile strength of the film was enhanced by more than 40% compared with other seaweed-based film of previous studies. A hazardous material test was conducted in accordance with IEC62321, and the result indicated that all of the concerned toxic material was estimated to be under the method detection limit (MDL). Based on the aforementioned results, a prototype egg carton was successfully developed in accordance with ISO 534.

Reduction-responsive and bioorthogonal carboxymethyl cellulose based soft hydrogels cross-linked via IEDDA click chemistry for cancer therapy application

In this work, novel biocompatible and reduction-responsive soft hydrogels were formulated from norbornene (Nb)-functionalized carboxymethyl cellulose (CMCNb). To cross-link the CMC-Nb via a highly bioorthogonal inverse electron demand Diels-Alder (IEDDA) reaction, we employed a water-soluble and reduction-responsive diselenide-based cross-linker possessing two terminal tetrazine (Tz) groups with varying molar concentrations (Nb/Tz molar ratios of 10/10, 10/05, and 10/2.5). The N₂ microbubbles liberated as a by-product during the IEDDA reaction generated in-situ pores in hydrogel networks. The resulting hydrogels had highly porous structures and relatively soft mechanical properties (storage moduli in the range 74 ⁓160 Pa). The hydrogels showed high swelling ratios (>35 times), tunable gelation times (1-5 min), and excellent doxorubicin (DOX) loading efficiencies (>85 %). The hydrogels exhibited stimuli-responsive and fast release of DOX (99 %, after 12 h) in the presence of 10 mmol of glutathione as compared to the normal PBS solution (38 %). The cytotoxic effects of blank hydrogels were not observed against HEK-239 cells, while the DOX-encapsulated hydrogels exhibited anti-tumor activity in BT-20 cancer cells. The results indicate potential applications of the CMC-based soft hydrogels in injectable drug delivery systems.

Multifunctional Modified Chitosan Biopolymers for Dual Applications in Biomedical and Industrial Field: Synthesis and Evaluation of Thermal, Chemical, Morphological, Structural, In Vitro Drug-Release Rate, Swelling and Metal Uptake Studies

The hydrogel materials are getting attention from the research due to their multidimensional usage in various fields. Chitosan is one of the most important hydrogels used in this regard. In this paper multifunctional binary graft copolymeric matrices of chitosan with monomer AA and various comonomers AAm and AN were prepared by performing free radical graft copolymerization in the presence of an initiator KPS. The binary grafting can be done at five different molar concentrations of binary comonomers at already optimized concentration of AA, KPS and other reaction conditions such as time, temperature, solvent amount, etc. Various optimum reaction conditions were investigated and presented in this work; the backbone as well as binary grafts Ch-graft-poly (AA-cop-AAm) and Ch-graft-poly (AA-cop-AN) were characterized via various physio-chemical techniques of analysis such as SEM analysis, Xray diffraction (XRD), TGA/DTA and FTIR. In the batch experiments, the binary grafts were investigated for the percent swelling with respect to pH (pH of 2.2, 7.0, 7.4 and 9.4) and time (contact time 1 to 24 h). Uploading and controllable in vitro release of the drug DS (anti-inflammatory) was examined with reverence to gastrointestinal pH and time. The binary grafts showed significantly better-controlled drug diffusion than the unmodified backbone. The kinetic study revealed that the diffusion of the drug occurred by the non-Fickian way. In the case of separation technologies, experiments (batch tests) were executed for the toxic bivalent metal ions Fe (II) and Pb (II) sorption from the aqueous media with respect to the parameters such as interaction period, concentration of fed metal ions in solution, pH and temperature. The binary grafted matrices showed superior results compared to chitosan. The kinetics study revealed that the matrices show pseudo-second order adsorption. The graft copolymer Ch-graft-poly (AA-cop-AAm) provided superior results in sustainable drug release as well as metal ion uptake. The study explored the potential of chitosan-based materials in the industry as well in the biomedical field. The results proved these to be excellent materials with a lot of potential as adsorbents.

Comparative Drug Release Investigations for Diclofenac Sodium Drug (DS) by Chitosan-Based Grafted and Crosslinked Copolymers

The hydrogels responding to pH synthesized by graft copolymerization only and then concurrent grafting and crosslinking of monomer N-isopropyl acrylamide (NIPAAM) and binary comonomers acrylamide, acrylic acid and acrylonitrile (AAm, AA and AN) onto chitosan support were explored for the percent upload and release study for anti-inflammatory diclofenac sodium drug (DS), w.r.t. time and pH. Diclofenac sodium DS was seized in polymeric matrices by the equilibration process. The crosslinked-graft copolymers showed the highest percent uptake than graft copolymers (without crosslinker) and chitosan itself. The sustainable release of the loaded drug was studied with respect to time at pH 2.2, 7.0, 7.4 and 9.4. Among graft copolymers (without crosslinking), Chit-g-polymer (NIPAAM-co-AA) and Chit-g-polymer (NIPAAM-co-AN) exhibited worthy results for sustainable drug deliverance, whereas Crosslink-Chit-g-polymer (NIPAAM-co-AA) and Crosslink-Chit-g-polymer (NIPAAM-co-AAm) presented the best results for controlled/sustained release of diclofenac sodium DS with 93.86 % and 96.30 % percent release, respectively, in 6 h contact time. Therefore, the grafted and the crosslinked graft copolymers of the chitosan showed excellent delivery devices for the DS with sustainable/prolonged release in response to pH. Drug release kinetics was studied using Fick’s law. The kinetic study revealed that polymeric matrices showed the value of n as n > 1.0, hence drug release took place by non-Fickian diffusion. Hence, the present novel findings showed the multidirectional drug release rate. The morphological changes due to interwoven network structure of the crosslinked are evident by the Scanning electron microscopy (SEM) analysis.

Biopolymers for Surgical Applications

Biopolymers have gained significant attention as a class of polymer materials with a wide range of applications, especially in the medical and pharmaceutical field. Due to particular characteristics, such as biocompatibility, biodegradability, non-toxicity, and functionality, they have become promising candidates for various surgical applications, including as bioadhesives, sealants, wound dressings, sutures, drug carriers, coating materials, etc. Recent research shows that further modification of biopolymers by advanced techniques can improve their functionality i.e., antibacterial activity, cell viability, drug-releasing capability, good wet adhesion performance, and good mechanical properties. This mini review aims to provide a brief report on the type of biopolymers and recent developments regarding their use in various surgical applications.

Angiogenic potential and wound healing efficacy of chitosan derived hydrogels at varied concentrations of APTES in chick and mouse models

Chitosan (Cs) based biomaterials seem to be indispensable for neovasculogenesis and angiogenesis that ensure accelerated wound healing. Cs/poly (vinyl alcohol) (PVA) bio-constructs were cross-linked and investigated with varying concentrations of aminopropyltriethoxysilane (APTES). This study comprised of three phases: fabrication of hydrogels, characterization, assessment of angiogenic potential along with toxico-pathological effects, wound healing efficacy in chick and mice, respectively. The hydrogels were characterized by FTIR, SEM and TGA and the swelling response was examined in different solvents. The hydrogels swelling ratio was decreased with increasing amount of APTES, showed the highest swelling at acidic and basic pH while low swelling at neutral pH. Chorioallantoic membranes (CAM) assay was performed to study in-vivo angiogenesis, toxicological, morphological, biochemical and histological analyses in developing chicks. The results showed remarkably improved angiogenesis with little deviations in morphological, histological features and liver enzymes of chick embryos at higher concentrations of APTES. Besides, full thickness wounds were excised on mice dorsolateral skin to assess the wound healing. The rate of wound size reduction was significantly higher after topical application of hydrogels with elevated levels of crosslinker. Hence, the hydrogels showed enhanced angiogenesis, accelerated wound healing with little or no observable in-vivo toxicity.

Biocompatible and Thermoresistant Hydrogels Based on Collagen and Chitosan

Hydrogels are considered good biomaterials for soft tissue regeneration. In this sense, collagen is the most used raw material to develop hydrogels, due to its high biocompatibility. However, its low mechanical resistance, thermal stability and pH instability have generated the need to look for alternatives to its use. In this sense, the combination of collagen with another raw material (i.e., polysaccharides) can improve the final properties of hydrogels. For this reason, the main objective of this work was the development of hydrogels based on collagen and chitosan. The mechanical, thermal and microstructural properties of the hydrogels formed with different ratios of collagen/chitosan (100/0, 75/25, 50/50, 25/75 and 0/100) were evaluated after being processed by two variants of a protocol consisting in two stages: a pH change towards pH 7 and a temperature drop towards 4 °C. The main results showed that depending on the protocol, the physicochemical and microstructural properties of the hybrid hydrogels were similar to the unitary system depending on the stage carried out in first place, obtaining FTIR peaks with similar intensity or a more porous structure when chitosan was first gelled, instead of collagen. As a conclusion, the synergy between collagen and chitosan improved the properties of the hydrogels, showing good thermomechanical properties and cell viability to be used as potential biomaterials for Tissue Engineering.

Cyclodextrin-Containing Hydrogels: A Review of Preparation Method, Drug Delivery, and Degradation Behavior

Hydrogels possess porous structures, which are widely applied in the field of materials and biomedicine. As a natural oligosaccharide, cyclodextrin (CD) has shown remarkable application prospects in the synthesis and utilization of hydrogels. CD can be incorporated into hydrogels to form chemically or physically cross-linked networks. Furthermore, the unique cavity structure of CD makes it an ideal vehicle for the delivery of active ingredients into target tissues. This review describes useful methods to prepare CD-containing hydrogels. In addition, the potential biomedical applications of CD-containing hydrogels are reviewed. The release and degradation process of CD-containing hydrogels under different conditions are discussed. Finally, the current challenges and future research directions on CD-containing hydrogels are presented.

Development and evaluation of pH-sensitive biodegradable ternary blended hydrogel films (chitosan/guar gum/PVP) for drug delivery application

pH responsive hydrogels have gained much attraction in biomedical fields. We have formulated ternary hydrogel films as a new carrier of drug. Polyelectrolyte complex of chitosan/guar gum/polyvinyl pyrrolidone cross-linked via sodium tripolyphosphate was developed by solution casting method. Fourier transform infrared spectroscopy, scanning electron microscopy and thermogravimetric analysis were conducted to examine the interactions between the polymeric chains, surface morphology and thermal stability, respectively. The swelling tests resulted that the swelling was reduced with the increase in the concentration of crosslinker due to the more entangled arrangement and less availability of pores in hydrogels. Ciprofloxacin hydrochloride was used as a model drug and its release in simulated gastric fluid, simulated intestinal fluid and phosphate buffer saline solution was studied. pH responsive behaviour of the hydrogels have subjected these hydrogels for drug release applications.

Chitosan: An Overview of Its Properties and Applications

Chitosan has garnered much interest due to its properties and possible applications. Every year the number of publications and patents based on this polymer increase. Chitosan exhibits poor solubility in neutral and basic media, limiting its use in such conditions. Another serious obstacle is directly related to its natural origin. Chitosan is not a single polymer with a defined structure but a family of molecules with differences in their composition, size, and monomer distribution. These properties have a fundamental effect on the biological and technological performance of the polymer. Moreover, some of the biological properties claimed are discrete. In this review, we discuss how chitosan chemistry can solve the problems related to its poor solubility and can boost the polymer properties. We focus on some of the main biological properties of chitosan and the relationship with the physicochemical properties of the polymer. Then, we review two polymer applications related to green processes: the use of chitosan in the green synthesis of metallic nanoparticles and its use as support for biocatalysts. Finally, we briefly describe how making use of the technological properties of chitosan makes it possible to develop a variety of systems for drug delivery.

Quaternary ammonium N,N,N-trimethyl chitosan derivative and povidone‑iodine complex as a potent antiseptic with enhanced wound healing property

The importance of developing more potent antimicrobials and robust infection prevention practices has been highlighted recently with the increase in reports of emerging bacterial resistance mechanisms and the development of antibiotic-resistant microbes. In this study, a quaternary ammonium chitosan derivative, N,N,N-trimethyl chitosan chloride (TMC) with inherent bactericidal property was synthesized and complexed with povidone‑iodine (PVP-I) to create a potentially more potent antiseptic solution that could also significantly enhance the wound healing process. TMC, a positively charged, water-soluble derivative of chitosan, formed stable solutions with PVP-I at 5% w/v TMC concentration (TMC5/PVP-I). TMC5/PVP-I was significantly effective against multidrug-resistant bacteria S. aureus compared with PVP-I alone. TMC/PVP-I solutions also showed fungicidal property against C. albicans, with no cytotoxic effects when tested against human fibroblast cells cultured in vitro. Wound healing assessment in vivo revealed early collagen formation and re-epithelialization for TMC5/PVP-I treated wounds in rats relative to control and PVP-I only. Formulation of TMC/PVP-I solutions presented in the study can be easily adapted in the existing production of commercial PVP-I creating a new product with more potent bactericidal and enhanced wound healing properties for optimal wound care.

Development and characterization of chitosan and acrylic acid-based novel biodegradable polymeric films for soil conditioning

In this study, biodegradable polymeric films (BPFs) based on chitosan and acrylic acid cross-linked with 3-aminopropyl triethoxysilane (APTES) were developed for water retention and soil-conditioning applications in areas sufferings from water scarcity. A series of BPFs were prepared by varying the amount of silica nanoparticles (SiNPs) (0.67% to 2.6%) and a correlation of the optimum amount of SiNPs with thermal stability, morphology, swellability (at various pH), degradability, and anti-microbial activity were deduced. The obtained results showed that the NP 8 (containing 2.51% of SiNPs) exhibited the maximum absorption capacity (1815%) in distilled water, whereas NP6 (including 1.88% of SiNPs) expressed the maximum thermal stability (T_50% at 375.61 °C). The microscopic images further strengthen this observation because the maximum number of micro-porous cavities was shown on the surface of NP8. The time-dependent swelling response in distilled water accomplished that hydrophilicity (percentage swelling) of films was enhanced with an increase in the concentration of SiNPs. All BPFs samples exhibited inhibitory response against both gram-positive (for Staphylococcus aureus was 2.9 cm for NP6) and gram-negative (for Escherichia coli was 0.9 cm for NP8) bacteria. The biodegradation test inferred that the degradation of BPFs in soil did not affect the soil fertility as nano-silica is proven as growth-promoting miniatures. It can be concluded that these BPFs may be efficiently employed in the agriculture sector for water retention and as a soil conditioner.

Synthesis and characterization of hydrogels based on carboxymethyl chitosan and poly(vinylpyrrolidone) blends prepared by electron beam irradiation having anticancer efficacy, and applications as drug carrier for controlled release of drug

Herein, carboxymethyl chitosan and poly(vinylpyrrolidone) based hydrogels were synthesized by electron beam irradiation with dose variations (15 kGy, 30 kGy, and 45 kGy) for drug delivery applications. Irradiation crosslinked hydrogels were characterized for swellings in different medias, chemical, thermal, cell cytotoxicity, and drug release aspects. Swelling analysis was evaluated in distilled water, buffer, and saline solutions. Fourier transform infrared analysis revealed the establishment of physical interactions and confirmed the presence of functional groups present in the drug carriers. Scanning electron microscopy depicted the porous structure, which is responsible for swelling, drug loading, and release. Cell cytotoxicity assays indicated good cell viability on RAW 264.7 cells and anticancer activity on cancerous AGS cell lines. Cumulative drug release (%) of kanamycin in PBS at pH 7.4 was more than 90 % at 168 h. These drug carriers show promise to be developed as a sustained drug delivery system.

Sodium alginate blended membrane with polyurethane: Desalination performance and antimicrobial activity evaluation

A series of polymeric membranes were synthesized by blending polyurethane with sodium alginate (0.2, 0.4, 0.6, 0.8 and 1.0%). The structural, morphological and thermal properties of the membranes were examined by FTIR, SEM, AFM and TGA, respectively. Performance evaluation (salt rejection and flux) was assessed through reverse osmosis technique (RO). The FTIR spectra of membranes confirmed extensive hydrogen bonding (3350 cm^-1). The SEM and AFM analyses supported a progressively rising surface roughness of blended membranes. The hydrophilicity, crosslinking density and thermal stability of the membranes were improved with an increase in alginate content. The capability of salt (NaCl and MgCl₂) rejection was improved with alginate up to 0.8%. In addition, the rejection of divalent ions was better than monovalent ions (94 ± 0.96% for NaCl and 98 ± 0.98% for MgCl₂). The blended membranes ascertained an effective chlorine resistivity. The antibacterial activity was also promising, which enhanced with the alginate content in the membrane. The sodium alginate blended membrane with polyurethane proved to be an efficient approach to develop the blended membranes with tunable properties for water desalination.

Polymer-based biomaterials for chronic wound management: Promises and challenges

Chronic non-healing wounds tender a great challenge to patients, physicians, and wound care professionals. In view of the increasing prevalence of chronic wounds due to ischemia, diabetic foot, venous, and pressure ulcers, their appropriate management requires significant attention. Along with the basic techniques of medical and surgical treatments; an ideal dressing is essential for a speedy recovery and rapid healing of such wounds. Mechanistic understanding of chronic wound pathology will not only help towards future directions for an ideal dressing model but also to resonant advance research related to specific dressings for various wound types. This review provides key insights into causes, pathophysiology, and critical issues pertaining to chronic wounds and their management. It also summarizes the challenges faced for chronic wound treatment and specified factors responsible for delayed healing. Moreover, this review delivers a detailed discussion on available polymeric materials (alginate, chitosan, hyaluronic acid, collagen, polyurethane, cellulose, dextran, gelatin, silk, and polyaniline), their functional characteristics, and usage as chronic wound healing agents for polymeric wound dressing development. Incorporation and comparison of the research studies for their thermal behavior, structural analysis, and microscopic studies by Fourier transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy, respectively and swelling studies of different polymeric materials are discussed. Additionally, studies of anatomy cum physiology of wound healing, pathophysiology, tissue engineering and advance healing management approaches makes the content of this review a significant tool for future studies on chronic wounds healing by polymeric wound dressings. In this review, polymeric wound dressings have been explained in terms of their structures, function, chemistry, and key characteristics. These features are directly linked to the polymeric systems' potential in the management of chronic wounds. These polymeric systems have gained promising success in solving real word global health problems. More recently, innovative approaches to fabricate the polymer dressings have been introduced, but their commercial, sustainable, and high-scale production largely remains unexplored. This review also summarizes the promises of polymeric wound dressings and provides a future perspective on how the clinical and commercial landscape could potentially be propelled by utilizing polymers in wound care management.

Investigation on the tunable effect of oxidized konjac glucomannan with different molecular weight on gelatin-based composite hydrogels

Herein, oxidized konjac glucomannan (OKG) with different molecular weight (M_w) were prepared as polysaccharide crosslinker to reinforce gelatin-based hydrogels. Then, properties of composite hydrogels with various OKGs were investigated via a series of methods, including Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), rheology, mechanical and biocompatibility tests. The results confirmed an increased degree of crosslinking and entanglement between gelatin and OKG with higher M_w. Besides, composite hydrogels not only showed increased mechanical strength, but self-healing ability at the same time, which were closely affected by the M_w of OKG. Furthermore, both composite hydrogels could support well proliferation of cells, which showed excellent capacity in tissue engineering and biomedical applications. In brief, this work provides a facile method to promote the overall properties of gelatin-based hydrogels, meanwhile revealed the relationship and mechanism underlying the effects of OKG with different M_w on composite hydrogels.

Synthesis, characterization, and in vitro evaluation of the starch-based α-amylase responsive hydrogels

Controlled-release drug delivery systems are promising platforms in medicine. Among various types of material in drug delivery, hydrogels are interesting ones. They are water-soluble and tissue compatible polymers with a high capacity to carry and release drugs in a controllable manner. In this study, we introduce the synthesis, characterization, and application of an α-amylase responsive hydrogel in controlled drug delivery. The newly synthesized starch-based hydrogels structurally characterized by means of Fourier-transform infrared spectroscopy and scanning electron microscopy. A proapoptotic drug, doxorubicin, was loaded into the hydrogels and the controlled release of the drug was assessed in the presence of α-amylase and ultimately it was evaluated to controlled-drug release in vitro and subsequently in killing cancer cells. Our results highlight the effectiveness of temporal drug delivery using α-amylase responsive hydrogels in killing cancer cells.