Reduction of nitrate by NaY zeolite supported Fe, Cu/Fe and Mn/Fe nanoparticles

Difunctional chitosan-stabilized Fe/Cu bimetallic nanoparticles for removal of hexavalent chromium wastewater

Bimetallic Fe/Cu nanoparticles were successfully stabilized by chitosan used for remediating hexavatlent chromium contaminated wasterwater. However, the over-loaded chitosan on the surface of Fe/Cu particles limited the Cr(VI) reduction due to the occupation of the surface reactive sites. Weighing the colloid stability and the reduction reactivity, the optimal dosage of chitosan is 2.0 wt% and the optimal Cu doping dosage is 3.0 wt%. SEM and TEM images showed that the chitosan-stabilized Fe/Cu bimetallic nanoparticles (CS-Fe/Cu nanoparticles) were uniformly dispersed, which had loose and porous surface. FTIR characterization showed that the binding sites of nZVI and chitosan. XRD demonstrated that the presence of copper and chitosan did not change the existence form of zero-valent iron. Most importantly, the contribution of chitosan and Cu in the removal mechanism was studied by the reduction experiments and the XPS analysis. On the one hand, chitosan could effectively combine with Cr(VI) due to chelation, on the other hand, Cu played an important role in the precipitation and coprecipitation phenomena. These findings indicate that CS-Fe/Cu has the potential to be a promising material for wastewater treatment.

Chitosan-titanium oxide fibers supported zero-valent nanoparticles: Highly efficient and easily retrievable catalyst for the removal of organic pollutants

Different chitosan-titanium oxide (CS-TiO₂-x, with x = TiO₂ loadings of 1, 5, 10,15 and 20 wt%) nanocomposite fibers were prepared and kept separately in each salt solution of CuSO₄, CoNO₃, AgNO₃ and NiSO₄ to adsorb Cu²⁺, Co²⁺, Ag⁺, and Ni⁺ ions, respectively. The metal ions loaded onto CS-TiO₂ fibers were reduced to their respective zero-valent metal nanoparticles (ZV-MNPs) like Cu⁰, Co⁰, Ag⁰ and Ni⁰ by treating with NaBH₄. The CS-TiO₂ fibers templated with various ZV-MNPs were characterized and investigated for their catalytic efficiency. Among all prepared ZV-MNPs, Cu⁰ nanoparticles templated on CS-TiO₂-15 fibers exhibited high catalytic efficiency for the reduction of dyes (methyl orange (MO), congo red (CR), methylene blue (MB) and acridine orange (AO)) and nitrophenols (4-nitrohphenol (4-NP), 2-nitrophenol (2-NP), 3-nitrophenol (3-NP) and 2,6-dinitrophenol (2,6-DNP)). Besides the good catalytic activities of Cu/CS-TiO₂-15 fibers, it could be easily recovered by simply pulling the fiber from the reaction medium.

Removal of nitrate from water by acid-washed zero-valent iron/ferrous ion/hydrogen peroxide: influencing factors and reaction mechanism

In this paper, a system consisting of acid-washed zero-valent iron (ZVI), ferrous ion (Fe²⁺), and hydrogen peroxide (H₂O₂) was employed for the removal of nitrate (NO₃^-) from water, and the reaction mechanism for this is discussed. The effects of acid-washed ZVI, Fe²⁺, H₂O₂, and initial NO₃^- concentration on nitrate removal were investigated. Acid-washed ZVI before and after reaction with nitrate were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Results reveal that the combined system can enhance the corrosion of ZVI and facilitate aqueous nitrate reduction. The products of nitrate reduction are mainly ammonium, with some N₂. The ZVI particles after reaction may have a core of ZVI with an oxidation layer mainly consisting of Fe₃O₄.