A new approach to improve antifouling property of PVDF membrane using in situ polymerization of PAA functionalized TiO2 nanoparticles

Novel Photocatalytic PVDF/Nano-TiO₂ Hollow Fibers for Environmental Remediation

Polyvinylidene difluoride (PVDF) mixed matrix membranes loaded with inorganic TiO₂ nanoparticles have received increasing attention in the last few years as self-cleaning membranes for possible application in wastewater treatment and seawater filtration. These novel membranes show increased hydrophilicity, stability and catalytic activity under UV-A irradiation. In this work, PVDF-TiO₂ hollow fibers were prepared by employing new strategies for enhancing the stability of the TiO₂ dispersion, reducing particle agglomeration and improving their distribution. The spinning conditions for producing ultrafiltration hollow fiber membranes from PVDF material and nano-TiO₂ were investigated. Finally, the optimized fibers have been characterized and tested for methylene blue (MB) degradation in water and salty seawater, revealing good permeability, long-term stability under UV-A irradiation, and photo-catalytic activity in both test solutions.

Synthesis of High Crystalline TiO2 Nanoparticles on a Polymer Membrane to Degrade Pollutants from Water

Titanium dioxide (TiO2) is described as an established material to remove pollutants from water. However, TiO2 is still not applied on a large scale due to issues concerning, for example, the form of use or low photocatalytic activity. We present an easily upscalable method to synthesize high active TiO2 nanoparticles on a polyethersulfone microfiltration membrane to remove pollutants in a continuous way. For this purpose, titanium(IV) isopropoxide was mixed with water and hydrochloric acid and treated up to 210 °C. After cooling, the membrane was simply dip-coated into the TiO2 nanoparticle dispersion. Standard characterization was undertaken (i.e., X-ray powder diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, water permeance, contact angle). Degradation of carbamazepine and methylene blue was executed. By increasing synthesis temperature crystallinity and photocatalytic activity elevates. Both ultrasound modification of nanoparticles and membrane pre-modification with carboxyl groups led to fine distribution of nanoparticles. The ultrasound-treated nanoparticles gave the highest photocatalytic activity in degrading carbamazepine and showed no decrease in degradation after nine times of repetition. The TiO2 nanoparticles were strongly bound to the membrane. Photocatalytic TiO2 nanoparticles with high activity were synthesized. The innovative method enables a fast and easy nanoparticle production, which could enable the use in large-scale water cleaning.

New insight into the adsorption behaviour of effluent organic matter on organic-inorganic ultrafiltration membranes: a combined QCM-D and AFM study

Adsorption of organic matter on membranes plays a major role in determining the fouling behaviour of membranes. This study investigated effluent organic matter (EfOM) adsorption behaviour onto poly(vinylidene fluoride) (PVDF) membrane blended with SiO₂ nanoparticles using quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM). The QCM-D results suggested that low adsorption of EfOM and an EfOM layer with a non-rigid and open structure was formed on SiO₂-terminated membrane surfaces. Conformational assessment showed that EfOM undergoes adsorption via two steps: (i) in the initial stage, a rapid adsorption of EfOM accumulated onto the membrane; (ii) the change in dissipation was still occurring when the adsorption frequency reached balance, and the layer tended towards a more rearranged or organized secondary structure upon adsorption onto the more hydrophilic surface. For the AFM force test, when a self-made EfOM-coated probe approached the membrane, a 'jump-in' was observed for the hydrophobic membrane after repulsion at a small distance, while only repulsive forces were observed for PVDF/SiO₂ membranes. This study demonstrated that the PVDF/SiO₂ membrane changed the entire filtration process, forming a 'soft' open conformation in the foulant layer.

Functionalization Effect on Polymer Nanocomposite Coatings Based on TiO₂⁻SiO₂ Nanoparticles with Superhydrophilic Properties

In this study, a novel binary nanocomposite system based on TiO₂-SiO₂ was functionalized with trimethylolpropane triacrylate (TMPTA) and characterized by XPS and XRD. Results revealed that TiO₂-SiO₂ nanoparticles were covalently functionalized. Functionalized nanoparticles at low concentrations (0.1 wt % and 0.5 wt %) were dispersed in acrylic acid acting as a polymer matrix. Nanocomposite coatings analysis demonstrate to achieve superhydrophilic properties as well as very good optical characteristics. Water contact angle characterization showed the functionalization effect by achieving a superhydrophilic behavior with a contact angle less than 5°. UV-Vis measurements demonstrated high optical transmittance above 95% for the coatings. Based on the obtained results a mechanism describing the chemical interactions of the constituents responsible for the synergy in the nanocomposite as well as the morphological play role in the behavior are presented.

Progress of Nanocomposite Membranes for Water Treatment

The use of membrane-based technologies has been applied for water treatment applications; however, the limitations of conventional polymeric membranes have led to the addition of inorganic fillers to enhance their performance. In recent years, nanocomposite membranes have greatly attracted the attention of scientists for water treatment applications such as wastewater treatment, water purification, removal of microorganisms, chemical compounds, heavy metals, etc. The incorporation of different nanofillers, such as carbon nanotubes, zinc oxide, graphene oxide, silver and copper nanoparticles, titanium dioxide, 2D materials, and some other novel nano-scale materials into polymeric membranes have provided great advances, e.g., enhancing on hydrophilicity, suppressing the accumulation of pollutants and foulants, enhancing rejection efficiencies and improving mechanical properties and thermal stabilities. Thereby, the aim of this work is to provide up-to-date information related to those novel nanocomposite membranes and their contribution for water treatment applications.

Modifications of polyethersulfone membrane by doping sulfated-TiO2 nanoparticles for improving anti-fouling property in wastewater treatment

Polyethersulfone (PES) composite membranes mixed with sulfated-TiO₂ nanoparticles were fabricated using a non-solvent induced phase inversion method.

Tabas coal preparation plant wastewater treatment with membrane technology

The goal of the present work is the Tabas coal preparation plant wastewater treatment using membrane technology. Polyacrylonitrile membrane was prepared through phase inversion method and then developed by annealing process. Also, high fouling resistance membranes were prepared by the embedding of TiO2 nanoparticles using self-assembling and blending methods. The effect of immersion time and TiO2 nanoparticles concentration was investigated using two techniques. The chemical structure, morphology, hydrophilicity, molecular weight cut-off and antifouling properties of membranes were characterized using energy-dispersive X-ray spectroscopy, scanning electron microscopy, contact angle, polyethylene glycol tracers, and cationic polyacrylamide (C-PAM) filtration, respectively. The optimized self-assembled membrane was shown to have more than 31.2% higher water flux with the best antifouling properties. Improving hydrophilicity leads to excellent antifouling properties for composite membranes and illustrates a promising method for fabrication of high performance membrane for C-PAM separation.

Preparation of Two-Layer Anion-Exchange Poly(ethersulfone) Based Membrane: Effect of Surface Modification

The present work deals with the surface modification of a commercial microfiltration poly(ethersulfone) membrane by graft polymerization technique. Poly(styrene-co-divinylbenzene-co-4-vinylbenzylchloride) surface layer was covalently attached onto the poly(ethersulfone) support layer to improve the membrane electrochemical properties. Followed by amination, a two-layer anion-exchange membrane was prepared. The effect of surface layer treatment using the extraction in various solvents on membrane morphological and electrochemical characteristics was studied. The membranes were tested from the point of view of water content, ion-exchange capacity, specific resistance, permselectivity, FT-IR spectroscopy, and SEM analysis. It was found that the two-layer anion-exchange membranes after the extraction using tetrahydrofuran or toluene exhibited smooth and porous surface layer, which resulted in improved ion-exchange capacity, electrical resistance, and permselectivity of the membranes.

Effect of functionalized multi-walled carbon nanotubes on the microstructure and performances of PVDF membranes

Functionalized multi-walled carbon nanotubes (f-MWCNTs) were synthesized by grafting carboxyl groups and 3-aminopropyltriethoxysilane (APTS) on the nanotube surface, respectively.