Simultaneous optical and electrical recording of single gramicidin channels

Droplet interface bilayers

Droplet interface bilayers (DIBs) provide a superior platform for the biophysical analysis of membrane proteins. The versatile DIBs can also form networks, with features that include built-in batteries and sensors.

A practical guide to single-molecule FRET

Single-molecule fluorescence resonance energy transfer (smFRET) is one of the most general and adaptable single-molecule techniques. Despite the explosive growth in the application of smFRET to answer biological questions in the last decade, the technique has been practiced mostly by biophysicists. We provide a practical guide to using smFRET, focusing on the study of immobilized molecules that allow measurements of single-molecule reaction trajectories from 1 ms to many minutes. We discuss issues a biologist must consider to conduct successful smFRET experiments, including experimental design, sample preparation, single-molecule detection and data analysis. We also describe how a smFRET-capable instrument can be built at a reasonable cost with off-the-shelf components and operated reliably using well-established protocols and freely available software.

Using ion channel-forming peptides to quantify protein-ligand interactions

This paper proposes a method for sensing affinity interactions by triggering disruption of self-assembly of ion channel-forming peptides in planar lipid bilayers. It shows that the binding of a derivative of alamethicin carrying a covalently attached sulfonamide ligand to carbonic anhydrase II (CA II) resulted in the inhibition of ion channel conductance through the bilayer. We propose that the binding of the bulky CA II protein (MW approximately 30 kD) to the ion channel-forming peptides (MW approximately 2.5 kD) either reduced the tendency of these peptides to self-assemble into a pore or extracted them from the bilayer altogether. In both outcomes, the interactions between the protein and the ligand lead to a disruption of self-assembled pores. Addition of a competitive inhibitor, 4-carboxybenzenesulfonamide, to the solution released CA II from the alamethicin-sulfonamide conjugate and restored the current flow across the bilayer by allowing reassembly of the ion channels in the bilayer. Time-averaged recordings of the current over discrete time intervals made it possible to quantify this monovalent ligand binding interaction. This method gave a dissociation constant of approximately 2 microM for the binding of CA II to alamethicin-sulfonamide in the bilayer recording chamber: this value is consistent with a value obtained independently with CA II and a related sulfonamide derivative by isothermal titration calorimetry.

Electrical measurements of bilayer membranes formed by Langmuir-Blodgett deposition on single-crystal silicon

Bilayer membranes on solid supports are used for fundamental studies of biophysical properties and for the development of biosensors and other devices. Here we report on electrically addressable bilayer membranes formed by Langmuir-Blodgett (LB)-based deposition on single-crystal silicon. The incorporation of a polymer cushion ensures high lipid mobility in both the lower and upper leaflet, allowing the potential for combined investigations of electrical, structural, and dynamic characteristics of membrane-associated proteins. Impedance spectroscopy is used to demonstrate that the lipid bilayers are robust and reproducible with an impedance of about 10(4) Omega cm2 and a capacitance of about 0.8 microF cm(-2). The ability to characterize ion channels is demonstrated using the model system gramicidin. These results demonstrate that artificial bilayers formed by LB deposition have many unique advantages for electrical measurements of membranes and their components.

Enhanced stability and fluidity in droplet on hydrogel bilayers for measuring membrane protein diffusion

We form artificial lipid bilayers suitable for single-molecule fluorescence microscopy by contacting an aqueous droplet with a hydrogel support immersed in a solution of lipid in oil. Our results show that droplet on hydrogel bilayers (DHBs) have high lipid mobilities, similar to those observed in unsupported lipid bilayers. DHBs are also stable over a period of several weeks. We examine membrane protein diffusion in these bilayers and report a decreased lateral mobility of the heptameric beta-barrel pore-forming toxin alpha-hemolysin versus that of its monomeric precursor. These results corroborate previous models of the alpha-hemolysin insertion mechanism where the monomer binds to the lipid bilayer without insertion.

Designing nanosensors based on charged derivatives of gramicidin A

Detection of chemical processes on a single molecule scale is the ultimate goal of sensitive analytical assays. We recently reported the possibility to detect chemical modifications on individual molecules by monitoring a change in the single ion channel conductance of derivatives of gramicidin A (gA) upon reaction with analytes in solution. These peptide-based nanosensors detect reaction-induced changes in the charge of gA derivatives that were engineered to carry specific functional groups near their C-terminus.1 Here, we discuss five key design parameters to optimize the performance of such chemomodulated ion channel sensors. In order to realize an effective sensor that measures changes in charge of groups attached to the C-terminus of a gA pore, the following conditions should be fulfilled: (1) the change in charge should occur as close to the entrance of the pore as possible; (2) the charge before and after reaction should be well-defined within the operational pH range; (3) the ionic strength of the recording buffer should be as low as possible while maintaining a detectable flow of ions through the pore; (4) the applied transmembrane voltage should be as high as possible while maintaining a stable membrane; (5) the lipids in the supporting membrane should either be zwitterionic or charged differently than the derivative of gA. We show that under the condition of high applied transmembrane potential (>100 mV) and low ionic strength of the recording buffer (< or =0.10 M), a change in charge at the entrance of the pore is the dominant requirement to distinguish between two differently charged derivatives of gA; the conductance of the heterodimeric gA pore reported here does not depend on a difference in charge at the exit of the pore. We provide a simple explanation for this asymmetric characteristic based on charge-induced local changes in the concentration of cations near the lipid bilayer membrane. Charge-based ion channel sensors offer tremendous potential for ultrasensitive functional detection since a single chemical modification of each individual sensing element can lead to readily detectable changes in channel conductance.

Simple one-pot preparation of water-soluble, cysteine-reactive cyanine and merocyanine dyes for biological imaging

A simple one-pot-procedure for preparation of protein-reactive, water-soluble merocyanine and cyanine dyes has been developed. The 1-(3-ammoniopropyl)-2,3,3-trimethyl-3H-indolium-5-sulfonate bromide (1) was used as a common starting intermediate. The method allows easy preparation of dyes with chloro- and iodoacetamide side chains for covalent attachment to cysteine. By placing a sulfonato group directly on the dye fluorophore system, dyes with high fluorescence quantum yields in water were generated. Both iodo- and chloroacetamido derivatives were shown to be useful in protein labeling. Less reactive chloroacetamides will be preferential for selective labeling of the most reactive cysteines.

Sensitized photoinactivation of minigramicidin channels in bilayer lipid membranes

The method of sensitized photoinactivation based on the photosensitized damage of gramicidin A (gA) molecules was applied here to study ionic channels formed by minigramicidin (the 11-residue analogue of gramicidin A) in a planar bilayer lipid membrane (BLM) of different thickness. Irradiation of BLM with a single flash of visible light in the presence of a photosensitizer (aluminum phthalocyanine or Rose Bengal) generating singlet oxygen provoked a decrease in the minigramicidin-induced electric current across BLM, the kinetics of which had the characteristic time of several seconds, as observed with gA. For gA, there is good correlation between the characteristic time of photoinactivation and the single-channel lifetime. In contrast to the covalent dimer of gA characterized by extremely long single-channel lifetime and the absence of current relaxation upon flash excitation, the covalent head-to-head dimer of minigramicidin displayed the flash-induced current decrease with the kinetics being strongly dependent on the membrane thickness. The current decrease became slower both upon increasing the concentration of the minigramicidin covalent dimer and upon including cholesterol in the membrane composition. These data in combination with the quadratic dependence of the current on the peptide concentration can be rationalized by hypothesizing that the macroscopic current across BLM measured at high concentrations of the peptide is provided by dimers of minigramicidin covalent dimers in the double beta(5.7)-helical conformation having the lifetime of about 0.4 s, while single channels with the lifetime of 0.01 s, observed at a very low peptide concentration, correspond to the single-stranded beta(6.3)-helical conformation. Alternatively the results can be explained by clustering of channels at high concentrations of the minigramicidin covalent dimer.

Single-molecule methods for monitoring changes in bilayer elastic properties

Membrane-spanning proteins perturb the organization and dynamics of the adjacent bilayer lipids. For example, when the hydrophobic length (l) of a bilayer-spanning protein differs from the average thickness (d0) of the host bilayer, the bilayer thickness will vary locally in the vicinity of the protein in order to "match" the length of the protein's hydrophobic exterior to the thickness of the bilayer hydrophobic core. Such bilayer deformations incur an energetic cost, the bilayer deformation energy (DeltaG0def), which will vary as a function of the protein shape, the protein-bilayer hydrophobic mismatch (d0 - l), the lipid bilayer elastic properties, and the lipid intrinsic curvature (c0). Thus, if the membrane protein conformational changes underlying protein function involve the protein/bilayer interface, the ensuing changes in DeltaG0def (DeltaDeltaG0def) will contribute to the overall free-energy change of the conformational changes (DeltaG0tot)-meaning that the host lipid bilayer will modulate protein function. For a given protein, (DeltaDeltaG0def) varies as a function of the bilayer geometric properties (thickness and intrinsic curvature) and the elastic (bending and compression) moduli, which vary as a function of changes in lipid composition or with the adsorption of amphiphiles at the bilayer/solution interface. To understand how changes in bilayer properties modulate the function of bilayer-spanning proteins, single-molecule methods have been developed to probe changes in bilayer elastic properties using gramicidins as molecular force transducers. Different approaches to measuring the deformation energy are described: (1) measurements of changes in channel lifetimes and appearance rates as the lipid bilayer thickness or channel length are varied, (2) measurements of the equilibrium distribution among channels of different lengths, formed by homo- and heterodimers between gramicidin subunits of different lengths, and (3) measurements of the ratio of the appearance rates of heterodimer channels relative to parent homodimer channels formed by gramicidin subunits of different lengths.

Controlled delivery of membrane proteins to artificial lipid bilayers by nystatin-ergosterol modulated vesicle fusion

The study of ion channels and other membrane proteins and their potential use as biosensors and drug screening targets require their reconstitution in an artificial membrane. These applications would greatly benefit from microfabricated devices in which stable artificial lipid bilayers can be rapidly and reliably formed. However, the amount of protein delivered to the bilayer must be carefully controlled. A vesicle fusion technique is investigated where composite ion channels of the polyene antibiotic nystatin and the sterol ergosterol are employed to render protein-carrying vesicles fusogenic. After fusion with an ergosterol-free artificial bilayer, the nystatin-ergosterol channels do not dissociate immediately and thus cause a transient current signal that marks the vesicle fusion event. Experimental pitfalls of this method were identified, the influence of the nystatin and ergosterol concentration on the fusion rate and the shape of the fusion event marker was explored, and the number of different lipid species was reduced. Under these conditions, the -amyloid peptide could be delivered in a controlled manner to a standard planar bilayer. Additionally, electrical recordings were obtained of vesicles fusing with a planar lipid bilayer in a microfabricated device, demonstrating the suitability of nystatin-ergosterol modulated vesicle fusion for protein delivery within microsystems.

Highly reproducible method of planar lipid bilayer reconstitution in polymethyl methacrylate microfluidic chip

We developed a highly reproducible method for planar lipid bilayer reconstitution using a microfluidic system made of a polymethyl methacrylate (PMMA) plastic substrate. Planar lipid bilayers are formed at apertures, 100 microm in diameter, by flowing lipid solution and buffer alternately into an integrated microfluidic channel. Since the amount and distribution of the lipid solution at the aperture determines the state of the lipid bilayer, controlling them precisely is crucial. We designed the geometry of the fluidic system so that a constant amount of lipid solution is distributed at the aperture. Then, the layer of lipid solution was thinned by applying an external pressure and finally became a bilayer when a pressure of 200-400 Pa was applied. The formation process can be simultaneously monitored with optical and electrical recordings. The maximum yield for bilayer formation was 90%. Using this technique, four lipid bilayers are formed simultaneously in a single chip. Finally, a channel current through gramicidin peptide ion channels was recorded to prove the compatibility of the chip with single molecule electrophysiology.

Polymer-supported membranes as models of the cell surface

Lipid-bilayer membranes supported on solid substrates are widely used as cell-surface models that connect biological and artificial materials. They can be placed either directly on solids or on ultrathin polymer supports that mimic the generic role of the extracellular matrix. The tools of modern genetic engineering and bioorganic chemistry make it possible to couple many types of biomolecule to supported membranes. This results in sophisticated interfaces that can be used to control, organize and study the properties and function of membranes and membrane-associated proteins. Particularly exciting opportunities arise when these systems are coupled with advanced semiconductor technology.

Shedding light on membrane proteins

Membrane proteins are a cell's first line of communication with the world that exists just beyond the plasma membrane. These proteins afford the cell a peek at its external environment, signal the cell to adjust its internal chemistry in response to its surroundings, and ensure that the cell's metabolic state is faithfully coupled to the outside world. Because of their importance in cellular communication, membrane proteins have been the focus of intense study at the functional and structural levels. Here, we describe optical techniques that can either passively monitor or actively control the structural rearrangements that take place as these proteins peek at the outside world. Our focus is on ion channels, but the techniques described can be applied to a host of other proteins.

A novel method for artificial lipid-bilayer formation

Many proposals have been made regarding the development of biosensors using single-channel recording with an artificial planar bilayer. The fragile nature of bilayer membranes is the major difficulty for the application of the artificial bilayer technique to the development of biosensors. We have developed an apparatus that promptly forms artificial bilayers. This technique is more efficient than other techniques for forming artificial bilayers. Bilayer membranes could be formed within 10s requiring 1 microl of analyte solution to record single-channel currents using our apparatus. A bilayer was formed by pressing the membrane on an agarose layer with hydraulic pressure. With this novel apparatus, we have recorded single-channel currents of various types of channels such as the BK-channel, the nicotinic receptor channel and the ryanodine receptor channel. The properties of the channels determined with this novel technique agreed well with those determined with conventional techniques.

"Optical patch-clamping": single-channel recording by imaging Ca2+ flux through individual muscle acetylcholine receptor channels

We describe an optical technique using total internal reflection fluorescence (TIRF) microscopy to obtain simultaneous and independent recordings from numerous ion channels via imaging of single-channel Ca²⁺ flux. Muscle nicotinic acetylcholine (ACh) receptors made up of αβγδ subunits were expressed in Xenopus oocytes, and single channel Ca²⁺ fluorescence transients (SCCaFTs) were imaged using a fast (500 fps) electron-multiplied c.c.d. camera with fluo-4 as the indicator. Consistent with their arising through openings of individual nicotinic channels, SCCaFTs were seen only when a nicotinic agonist was present in the bathing solution, were blocked by curare, and increased in frequency as roughly the second power of [ACh]. Their fluorescence amplitudes varied linearly with membrane potential and extrapolated to zero at about +60 mV. The rise and fall times of fluorescence were as fast as 2 ms, providing a kinetic resolution adequate to characterize channel gating kinetics; which showed mean open times of 7.9 and 15.8 ms when activated, respectively, by ACh or suberyldicholine. Simultaneous records were obtained from >400 channels in the imaging field, and we devised a novel “channel chip” representation to depict the resultant large dataset as a single image. The positions of SCCaFTs remained fixed (<100 nm displacement) over tens of seconds, indicating that the nicotinic receptor/channels are anchored in the oocyte membrane; and the spatial distribution of channels appeared random without evidence of clustering. Our results extend single-channel TIRFM imaging to ligand-gated channels that display only partial permeability to Ca²⁺, and demonstrate an order-of-magnitude improvement in kinetic resolution. We believe that functional single-channel imaging opens a new approach to ion channel study, having particular advantages over patch-clamp recording in that it is massively parallel, and provides high-resolution spatial information that is inaccessible by electrophysiological techniques.

An automated method for generating analogic signals that embody the Markov kinetics of model ionic channels

In this work we present an automated method for generating electrical signals which reflect the kinetics of ionic channels that have custom-tailored intermediate sub-states and intermediate reaction constants. The concept of our virtual single-channel waveform generator makes use of two software platforms, one for the numerical generation of single channel traces stemming from a pre-defined model and another for the digital-to-analog conversion of such numerical generated single channel traces. This technique of continuous generation and recording of the activity of a model ionic channel provides an efficient protocol to teach neophytes in the field of single-channel electrophysiology about its major phenomenological facets. Random analogic signals generated by using our technique can be successfully employed in a number of applications, such us: assisted learning of the single-molecule kinetic investigation via electrical recordings, impedance spectroscopy, the evaluation of linear frequency response of neurons and the study of stochastic resonance of ion channels.

Probing single-molecule protein conformational dynamics

Protein conformational fluctuations and dynamics, often complex and associated with inhomogeneities, play a crucial role in biomolecular functions. It is extremely difficult to characterize such inhomogeneous dynamics in an ensemble-averaged measurement, especially when the proteins are involved in multiple-step, multiple-conformation complex chemical interactions and transformations, such as in enzymatic reactions, protein-protein interactions, and ion-channel membrane protein processes. Alternatively, single-molecule spectroscopy is a powerful approach to probing and analyzing protein conformational dynamics in real time.

Cross talk free fluorescence cross correlation spectroscopy in live cells

Fluorescence correlation spectroscopy (FCS) is now a widely used technique to measure small ensembles of labeled biomolecules with single molecule detection sensitivity (e.g., low endogenous concentrations). Fluorescence cross correlation spectroscopy (FCCS) is a derivative of this technique that detects the synchronous movement of two biomolecules with different fluorescence labels. Both methods can be applied to live cells and, therefore, can be used to address a variety of unsolved questions in cell biology. Applications of FCCS with autofluorescent proteins (AFPs) have been hampered so far by cross talk between the detector channels due to the large spectral overlap of the fluorophores. Here we present a new method that combines advantages of these techniques to analyze binding behavior of proteins in live cells. To achieve this, we have used dual color excitation of a common pair of AFPs, ECFP and EYFP, being discriminated in excitation rather than in emission. This is made possible by pulsed excitation and detection on a shorter timescale compared to the average residence time of particles in the FCS volume element. By this technique we were able to eliminate cross talk in the detector channels and obtain an undisturbed cross correlation signal. The setup was tested with ECFP/EYFP lysates as well as chimeras as negative and positive controls and demonstrated to work in live HeLa cells coexpressing the two fusion proteins ECFP-connexin and EYFP-connexin.

Advances in sequencing technology

Faster sequencing methods will undoubtedly lead to faster single nucleotide polymorphism (SNP) discovery. The Sanger method has served as the cornerstone for genome sequence production since 1977, close to almost 30 years of tremendous utility [Sanger, F., Nicklen, S., Coulson, A.R, DNA sequencing with chain-terminating inhibitors, Proc. Natl. Acad. Sci. U.S.A. 74 (1977) 5463-5467]. With the completion of the human genome sequence [Venter, J.C. et al., The sequence of the human genome, Science 291 (2001) 1304-1351; Lander, E.S. et al., Initial sequencing and analysis of the human genome, Nature 409 (2001) 860-921], there is now a focus on developing new sequencing methodologies that will enable "personal genomics", or the routine study of our individual genomes. Technologies that will lead us to this lofty goal are those that can provide improvements in three areas: read length, throughput, and cost. As progress is made in this field, large sections of genomes and then whole genomes of individuals will become increasingly more facile to sequence. SNP discovery efforts will be enhanced lock-step with these improvements. Here, the breadth of new sequencing approaches will be summarized including their status and prospects for enabling personal genomics.

Microchip Technology in Ion-Channel Research

The electrical activity of living cells can be monitored in various ways, but for the study of ion channels and the drugs that affect them, the patch-clamp techniques are the most sensitive. Recent developments in microfabricated patch-clamp electrodes are reviewed, and technical challenges for the future are discussed.

Voltage-Gated Ion Channels

Voltage-dependent ion channels are membrane proteins that conduct ions at high rates regulated by the voltage across the membrane. They play a fundamental role in the generation and propagation of the nerve impulse and in cell homeostasis. The voltage sensor is a region of the protein bearing charged amino acids that relocate upon changes in the membrane electric field. The movement of the sensor initiates a conformational change in the gate of the conducting pathway thus controlling the flow of ions. Major advances in molecular biology, spectroscopy, and structural techniques are delineating the main features and possible structural changes that account for the function of voltage-dependent channels.

Imaging single cardiac ryanodine receptor Ca2+ fluxes in lipid bilayers

In this and an accompanying report we describe two steps, single-channel imaging and channel immobilization, necessary for using optical imaging to analyze the function of ryanodine receptor (RyR) channels reconstituted in lipid bilayers. An optical bilayer system capable of laser scanning confocal imaging of fluo-3 fluorescence due to Ca2+ flux through single RyR2 channels and simultaneous recording of single channel currents was developed. A voltage command protocol was devised in which the amplitude, time course, shape, and hence the quantity of Ca2+ flux through a single RyR2 channel is controlled solely by the voltage imposed across the bilayer. Using this system, the voltage command protocol, and concentrations of Ca2+ (25-50 mM) that result in saturating RyR2 Ca2+ currents, proportional fluo-3 fluorescence was recorded simultaneously with Ca2+ currents having amplitudes of 0.25-14 pA. Ca2+ sparks, similar to those obtained with conventional microscope-based laser scanning confocal systems, were imaged in mouse ventricular cardiomyocytes using the optical bilayer system. The utility of the optical bilayer for systematic investigation of how cellular factors extrinsic to the RyR2 channel, such as Ca2+ buffers and diffusion, alter fluo-3 fluorescent responses to RyR2 Ca2+ currents, and for addressing other current research questions is discussed.

Microfabricated teflon membranes for low-noise recordings of ion channels in planar lipid bilayers

We present a straightforward, accessible method for the fabrication of micropores with diameters from 2 to 800 micro m in films of amorphous Teflon (Teflon AF). Pores with diameters </=40 micro m made it possible to record ion fluxes through ion channels in planar bilayers with excellent signal characteristics. These pores afforded: i), stable measurements at transmembrane voltages up to 460 mV; ii), recordings at low noise levels (0.4 pA rms at 4.3 kHz bandwidth); iii), recordings at high effective bandwidth (10.7 kHz); and iv), formation of multiple planar lipid bilayers in parallel. Microfabricated pores in films of Teflon AF made it possible to examine, experimentally and theoretically, the influence of the pore diameter on the current noise in planar bilayer recordings. Reducing the pore diameter below 40 micro m mainly increased the stability of the planar bilayers, but had only a small effect on the level of the current noise. The low-noise properties of bilayer recordings on micropores in Teflon AF films were exploited to record the smallest conductance state of alamethicin (24 pS) at an unprecedentedly high bandwidth of 10.7 kHz.

Imaging the activity and localization of single voltage-gated Ca(2+) channels by total internal reflection fluorescence microscopy

The patch-clamp technique has enabled functional studies of single ion channels, but suffers limitations including lack of spatial information and inability to independently monitor currents from more than one channel. Here, we describe the use of total internal reflection fluorescence microscopy as an alternative, noninvasive approach to optically monitor the activity and localization of multiple Ca(2+)-permeable channels in the plasma membrane. Images of near-membrane Ca(2+) signals were obtained from >100 N-type channels expressed within restricted areas (80 x 80 micro m) of Xenopus oocytes, thereby permitting simultaneous resolution of their gating kinetics, voltage dependence, and localization. Moreover, this technique provided information inaccessible by electrophysiological means, demonstrating that N-type channels are immobile in the membrane, show a patchy distribution, and display diverse gating kinetics even among closely adjacent channels. Total internal reflection fluorescence microscopy holds great promise for single-channel recording of diverse voltage- and ligand-gated Ca(2+)-permeable channels in the membrane of neurons and other isolated or cultured cells, and has potential for high-throughput functional analysis of single channels.

Structural Dynamics and Processing of Nucleic Acids Revealed by Single-Molecule Spectroscopy

Single-molecule fluorescence spectroscopy is a powerful method to observe real time movements of individual biological molecules while they are functioning without the need for synchronization. Dynamic characteristics of nucleic acids can now be easily and reliably studied, and new applications are emerging in which their recognition and processing by proteins and enzymes are being understood with unprecedented detail. The most recent examples are discussed, including the hairpin ribozyme, Holliday junction, G-quadruplex, Rep helicase, reverse transcriptase, and combination with mechanical manipulation.

Membrane surface dynamics of DNA-threaded nanopores revealed by simultaneous single-molecule optical and ensemble electrical recording

We describe a method for simultaneous single-molecule optical and electrical characterization of membrane-based sensors that contain ion-channel nanopores. The technique is used to study the specific and nonspecific interactions of streptavidin-capped DNA polymers with lipid bilayers composed of diphytanoyl phosphatidylcholine and diphytanoyl phosphatidylglycerol. Biotinylated DNA that is bound to fluorescently labeled streptavidin is electrophoretically driven into, or away from, the lumen of alpha hemolysin (alphaHL) ion channels by an external electric field. Confocal microscopy simultaneously captures single-molecule fluorescence dynamics from the membrane interface at different applied potentials. Fluorescence correlation analysis is used to determine the surface number density and diffusion constant of membrane-associated complexes. The dual optical and electrical approach can detect membrane-associated species at a surface coverage below 10(-5) monolayers of streptavidin, a sensitivity that surpasses most other in vitro surface analysis techniques. By comparing the change in transmembrane current to the number of fluorescent molecules leaving the bilayer when the electrical potential is reversed, we demonstrate the general utility of the approach within the context of nanopore-based sensing and discuss a mechanism by which DNA-streptavidin complexes can be nonspecifically retained at the membrane interface.

Gating gramicidin channels in lipid bilayers: reaction coordinates and the mechanism of dissociation

The dissociation of gramicidin A (gA) channels into monomers is the simplest example of a channel gating process. The initial steps in this process are studied via a computational model that simulates the reaction coordinate for dimer-monomer dissociation. The nonbonded interaction energy between the monomers is determined, allowing for their free relative translational and rotational motion. Lowest energy pathways and reaction coordinates of the gating process are determined. Partial rupture of the six hydrogen bonds (6HB) at the dimer junction takes place by coupling monomer rotation and lateral displacement. Coupling rotation with axial separation is far more expensive energetically. The transition state for channel dissociation occurs when monomers are displaced laterally by approximately 4-6 A, separated by approximately 1.6-2 A, and rotated by approximately 120 degrees, breaking two hydrogen bonds. In membranes with significant hydrophobic mismatch there is a much greater likelihood of forming 4HB and possibly even 2HB states. In the 4HB state the pore remains fully open and conductive. However, transitions from the 6HB to 4HB and 4HB to 2HB states take place via intermediates in which the gA pore is closed and nonconductive. These lateral monomer displacements give rise to transitory pore occlusion at the dimer junction, which provides a rationale for fast closure events (flickers). Local dynamics of gA monomers also leads to lateral and rotational diffusion of the whole gA dimer, giving rise to diffusional rotation of the dimer about the channel axis.

Probing conformational changes of gramicidin ion channels by single-molecule patch-clamp fluorescence microscopy

Complex conformational changes influence and regulate the dynamics of ion channels. Such conformational changes are stochastic and often inhomogeneous, which makes it extremely difficult, if not impossible, to characterize them by ensemble-averaged experiments or by single-channel recordings of the electric current that report the open-closed events but do not specifically probe the associated conformational changes. Here, we report our studies on ion channel conformational changes using a new approach, patch-clamp fluorescence microscopy, which simultaneously combines single-molecule fluorescence spectroscopy and single-channel current recordings to probe the open-closed transitions and the conformational dynamics of individual ion channels. We demonstrate patch-clamp fluorescence microscopy by measuring gramicidin ion channel conformational changes in a lipid bilayer formed at a patch-clamp micropipette tip under a buffer solution. By measuring single-pair fluorescence resonance energy transfer and fluorescence self-quenching from dye-labeled gramicidin channels, we observed that the efficiency of single-pair fluorescence resonance energy transfer and self-quenching is widely distributed, which reflects a broad distribution of conformations. Our results strongly suggest a hitherto undetectable correlation between the multiple conformational states of the gramicidin channel and its closed and open states in a lipid bilayer.

Combined single-molecule force and fluorescence measurements for biology

Recent advances in single-molecule techniques allow the application of force to an individual biomolecule whilst simultaneously monitoring its response using fluorescent probes. The effects of applied mechanical load on single-enzyme turnovers, biomolecular interactions and conformational changes can now be studied with nanometer precision and millisecond time resolution.