Origins of nanoscale damage to glass-sealed platinum electrodes with submicrometer and nanometer size

Multifunctional scanning ion conductance microscopy

Scanning ion conductance microscopy (SICM) is a nanopipette-based technique that has traditionally been used to image topography or to deliver species to an interface, particularly in a biological setting. This article highlights the recent blossoming of SICM into a technique with a much greater diversity of applications and capability that can be used either standalone, with advanced control (potential-time) functions, or in tandem with other methods. SICM can be used to elucidate functional information about interfaces, such as surface charge density or electrochemical activity (ion fluxes). Using a multi-barrel probe format, SICM-related techniques can be employed to deposit nanoscale three-dimensional structures and further functionality is realized when SICM is combined with scanning electrochemical microscopy (SECM), with simultaneous measurements from a single probe opening up considerable prospects for multifunctional imaging. SICM studies are greatly enhanced by finite-element method modelling for quantitative treatment of issues such as resolution, surface charge and (tip) geometry effects. SICM is particularly applicable to the study of living systems, notably single cells, although applications extend to materials characterization and to new methods of printing and nanofabrication. A more thorough understanding of the electrochemical principles and properties of SICM provides a foundation for significant applications of SICM in electrochemistry and interfacial science.

Atomic force microscopy with nanoelectrode tips for high resolution electrochemical, nanoadhesion and nanoelectrical imaging

Multimodal nano-imaging in electrochemical environments is important across many areas of science and technology. Here, scanning electrochemical microscopy (SECM) using an atomic force microscope (AFM) platform with a nanoelectrode probe is reported. In combination with PeakForce tapping AFM mode, the simultaneous characterization of surface topography, quantitative nanomechanics, nanoelectronic properties, and electrochemical activity is demonstrated. The nanoelectrode probe is coated with dielectric materials and has an exposed conical Pt tip apex of ∼200 nm in height and of ∼25 nm in end-tip radius. These characteristic dimensions permit sub-100 nm spatial resolution for electrochemical imaging. With this nanoelectrode probe we have extended AFM-based nanoelectrical measurements to liquid environments. Experimental data and numerical simulations are used to understand the response of the nanoelectrode probe. With PeakForce SECM, we successfully characterized a surface defect on a highly-oriented pyrolytic graphite electrode showing correlated topographical, electrochemical and nanomechanical information at the highest AFM-SECM resolution. The SECM nanoelectrode also enabled the measurement of heterogeneous electrical conductivity of electrode surfaces in liquid. These studies extend the basic understanding of heterogeneity on graphite/graphene surfaces for electrochemical applications.

The Dynamic Steady State of an Electrochemically Generated Nanobubble

This article describes the dynamic steady state of individual H₂ nanobubbles generated by H⁺ reduction at inlaid and recessed Pt nanodisk electrodes. Electrochemical measurements coupled with finite element simulations allow analysis of the nanobubble geometry at dynamic equilibrium. We demonstrate that a bubble is sustainable at Pt nanodisks due to the balance of nanobubble shrinkage due to H₂ dissolution and growth due to H₂ electrogeneration. Specifically, simulations are used to predict stable geometries of the H₂/Pt/solution three-phase interface and the width of exposed Pt at the disk circumference required to sustain the nanobubble via steady-state H₂ electrogeneration. Experimentally measured currents, i^ss, corresponding to the electrogeneration of H₂, at or near the three-phase interface, needed to sustain the nanobubble are between 0.2 and 2.4 nA for Pt nanodisk electrodes with radii between 2.5 and 40 nm. However, simple theoretical analysis shows that the diffusion-limited currents required to sustain such a single nanobubble at an inlaid Pt nanodisk are 1-2 orders larger than the observed values. Finite element simulation of the dynamic steady state of a nanobubble at an inlaid disk also demonstrates that the expected steady-state currents are much larger than the experimental currents. Better agreement between the simulated and experimental values of i^ss is obtained by considering recession of the Pt disk nanoelectrode below the plane of the insulating surface, which reduces the outward flux of H₂ from the nanobubble and results in smaller values of i^ss.

Advanced electroanalytical chemistry at nanoelectrodes

Nanoelectrodes, with dimensions below 100 nm, have the advantages of high sensitivity and high spatial resolution. These electrodes have attracted increasing attention in various fields such as single cell analysis, single-molecule detection, single particle characterization and high-resolution imaging. The rapid growth of novel nanoelectrodes and nanoelectrochemical methods brings enormous new opportunities in the field. In this perspective, we discuss the challenges, advances, and opportunities for nanoelectrode fabrication, real-time characterizations and high-performance electrochemical instrumentation.

Laplace Pressure of Individual H2 Nanobubbles from Pressure-Addition Electrochemistry

The Young-Laplace equation is central to the thermodynamic description of liquids with highly curved interfaces, e.g., nanoscale droplets and their inverse, nanoscale bubbles. The equation relates the pressure difference across an interface to its surface tension and radius of curvature, but the validity in using the macroscopic surface tension for describing curved interfaces with radii smaller than tens of nanometers has been questioned. Here we present electrochemical measurement of Laplace pressures within single H₂ bubbles between 7 and 200 nm radius (corresponding, respectively, to between 200 and 7 atm). Our results demonstrate a linear relationship between a bubble's Laplace pressure and its reciprocal radius, verifying the classical thermodynamic description of H₂ nanobubbles as small as ∼10 nm.

Resistive Pulse Delivery of Single Nanoparticles to Electrochemical Interfaces

An experimental system for controlling and interrogating the collisions of individual nanoparticles at electrode/electrolyte interfaces is described. A nanopipet positioned over a 400 nm radius Pt ultramicroelectrode is used to deliver individual nanoparticles, via pressure-driven solution flow, to the underlying electrode, where the nanoparticles undergo collisions and are detected electrochemically. High-velocity collisions result in elastic collisions of negatively charged polystyrene nanospheres at the Pt/water interface, while low-velocity collisions result in nanoparticle adsorption ("sticky" collisions). The ability to position the nanopipet with respect to the underlying ultramicroelectrode also allows the time between particle release from the nanopipet and electrode collision to be investigated as a function of nanopipet-electrode separation, d. The time between release and collision of the nanoparticle is found to be proportional to d³, in excellent agreement with an analytical expression for convective fluid flow from a pipet orifice.

Scanning Electrochemical Microscopy of Carbon Nanomaterials and Graphite

Carbon materials are tremendously important as electrode materials in both fundamental and applied electrochemistry. Recently, significant attention has been given not only to traditional carbon materials, but also to carbon nanomaterials for various electrochemical applications in energy conversion and storage as well as sensing. Importantly, many of these applications require fast electron-transfer (ET) reactions between a carbon surface and a redox-active molecule in solution. It, however, has not been well understood how heterogeneous ET kinetics at a carbon/solution interface is affected by the electronic structure, defect, and contamination of the carbon surface. Problematically, it is highly challenging to measure the intrinsic electrochemical reactivity of a carbon surface, which is readily passivated by adventitious organic contaminants. This Account summarizes our recent studies of carbon nanomaterials and graphite by scanning electrochemical microscopy (SECM) not only to reveal the fast ET kinetics of simple ferrocene derivatives at their graphitic surfaces, but also to obtain mechanistic insights into their extraordinary electrochemical reactivity. Specifically, we implemented new principles and technologies to reliably and reproducibly enable nanoscale SECM measurements. We took advantage of a new SECM imaging principle to resolve the high reactivity of the sidewall of individual single walled carbon nanotubes. In addition, we developed SECM-based nanogap voltammetry to find that monolayer graphene grown by chemical vapor deposition yields an unprecedentedly high standard ET rate constant, k(0), of ≥25 cm/s, which was >1000 times higher than that reported in the literature. Remarkably, the nonideal asymmetry of paired nanogap voltammograms revealed that the high reactivity of graphitic surfaces is compromised by their contamination with airborne hydrocarbons. Most recently, we protected the clean surface of highly oriented pyrolytic graphite from the airborne contaminants during its exfoliation and handling by forming a water adlayer to obtain a reliable k(0) value of ≥12 cm/s from symmetric pairs of nanogap voltammograms. We envision that SECM of clean graphitic surfaces will enable us to reliably address not only effects of their electronic structures on their electrochemical reactivity, but also the activity of carbon-based or carbon-supported electrocatalysts for fuel cells and batteries.

Focused-Ion-Beam-Milled Carbon Nanoelectrodes for Scanning Electrochemical Microscopy

Nanoscale scanning electrochemical microscopy (SECM) has emerged as a powerful electrochemical method that enables the study of interfacial reactions with unprecedentedly high spatial and kinetic resolution. In this work, we develop carbon nanoprobes with high electrochemical reactivity and well-controlled size and geometry based on chemical vapor deposition of carbon in quartz nanopipets. Carbon-filled nanopipets are milled by focused ion beam (FIB) technology to yield a flat disk tip with a thin quartz sheath as confirmed by transmission electron microscopy. The extremely high electroactivity of FIB-milled carbon nanotips is quantified by enormously high standard electron-transfer rate constants of ≥10 cm/s for Ru(NH3)63+. The tip size and geometry are characterized in electrolyte solutions by SECM approach curve measurements not only to determine inner and outer tip radii of down to ~27 and ~38 nm, respectively, but also to ensure the absence of a conductive carbon layer on the outer wall. In addition, FIB-milled carbon nanotips reveal the limited conductivity of ~100 nm-thick gold films under nanoscale mass-transport conditions. Importantly, carbon nanotips must be protected from electrostatic damage to enable reliable and quantitative nanoelectrochemical measurements.

Scanning Electrochemical Microscopy Study of Permeability of a Thiolated Aryl Multilayer and Imaging of Single Nanocubes Anchored to It

Electroreduction of diazonium salts is a widely used technique for grafting organic films on various surfaces. In this paper, scanning electrochemical microscopy (SECM) was used for high-resolution characterization of a thiolated aryl multilayer film obtained by electrografting of thiophenol diazonium on highly ordered pyrolytic graphite (HOPG). The blocking properties of the film were evaluated, and the origins of incomplete surface passivation were elucidated by comparing current-distance curves and surface reactivity maps obtained with nanometer- and micrometer-sized tips. In this way, one can distinguish between different pathways of charge transport in the film, e.g., pinhole defects versus rate-limiting charge transfer through the film. Pd nanocubes were anchored to the film by thiol groups and imaged by SECM. The applicability of SECM to in situ visualization of the geometry of non-spherical nanoparticles has been demonstrated.

Development of Au Disk Nanoelectrode Down to 3 nm in Radius for Detection of Dopamine Release from a Single Cell

A Au disk nanoelectrode down to 3 nm in radius was developed by a facile and reliable method and successfully applied for monitoring dopamine release from single living vesicles. A fine etched Au wire was coated with cathodic electrophoretic paint followed by polyimide, which retracted from the tip end during curing to expose the Au nanotip. By cyclic voltammetric scanning the above tip in 0.5 M KCl, the transformation of a core-shaped apex into a geometrically well-defined Au disk nanoelectrode with different dimensions can be controllably and reproducibly achieved. Scanning electron microscopy, transmission electron microscopy, and steady-state voltammetry were used to determine the size of nanoelectrodes. The results showed that the specific etching and insulation method not only avoids the use of toxic etching solution and the uncontrollable treatment to expose the tip but also makes possible the controllable and reproducible fabrication of Au disk nanoelectrode down to 3 nm in radius. The nanoelectrodes with well-demonstrated analytical performance were further applied for amperometrically monitoring dopamine release from single rat pheochromacytoma cells with high spatial resolution.

Cleaning nanoelectrodes with air plasma

Unlike macroscopic and micrometer-sized solid electrodes whose surface can be reproducibly cleaned by mechanical polishing, cleaning the nanoelectrode surface is challenging because of its small size and extreme fragility. Even very gentle polishing typically changes the nanoelectrode size and geometry, thus, complicating the replication of nanoelectrochemical experiments. In this letter, we show the possibility of cleaning nanoelectrode surfaces nondestructively by using an air plasma cleaner. The effects of plasma cleaning have been investigated by atomic force microscopy (AFM) imaging, voltammetry, and scanning electrochemical microscopy (SECM). A related issue, the removal of an insoluble organic film from the nanoelectrode by plasma cleaning, is also discussed.

Electrochemistry at highly oriented pyrolytic graphite (HOPG): lower limit for the kinetics of outer-sphere redox processes and general implications for electron transfer models

Electron transfer kinetics for outer-sphere redox couples is fast on the basal surface of highly oriented pyrolytic graphite (HOPG).

Preparation, electrochemical responses and sensing application of Au disk nanoelectrodes down to 5 nm

Single Au nano-disk nanoelectrodes with the radii down to 5 nm have been prepared, which can be used to measure ferritin molecules in the amount of ∼3900 molecules or 6.1 zmol.

Development of a versatile in vitro platform for studying biological systems using micro-3D printing and scanning electrochemical microscopy

We report a novel strategy for studying a broad range of cellular behaviors in real time by combining two powerful analytical techniques, micro-3D printing and scanning electrochemical microscopy (SECM). This allows one, in microbiological studies, to isolate a known number of cells in a micrometer-sized chamber with a roof and walls that are permeable to small molecules and observe metabolic products. In such studies, the size and spatial organization of a population play a crucial role in cellular group behaviors, such as intercellular interactions and communication. Micro-3D printing, a photolithographic method for constructing cross-linked protein microstructures, permits one to compartmentalize a small population of microbes by forming a porous roof and walls around cells in situ. Since the roof and walls defining the microchamber are porous, any small molecules can freely diffuse from the chamber to be detected and quantified using SECM. The size of the chamber and the roof permeability can be obtained by SECM using a small probe molecule, ferrocenemethanol (FcMeOH). The chamber permeability to FcMeOH can be tuned by varying printing parameters that influence the cross-linking density of the proteinaceous material. These analyses establish a versatile strategy as a sensitive platform to quantitatively monitor small molecules produced by microbes.

Fabrication of metal nanoelectrodes by interfacial reactions

Despite great improvements in the past decades, the controllable fabrication of metal nanoelectrodes still remains very challenging. In this work, a simple and general way to fabricate metal nanoelectrodes (Ag, Au, and Pt) is developed. On the basis of interfacial reactions at nano-liquid/liquid interfaces supported at nanopipettes, the nanoparticles can be formed in situ and have been used to block the orifices of pipettes to make nanoelectrodes. The effect of the driving force for interfacial reaction at the liquid/liquid interface, the ratio of redox species in organic and aqueous phases, and the surface charge of the inner wall of a pipette have been studied. The fabricated nanoelectrodes have been characterized by scanning electron microscopy (SEM) and electrochemical techniques. A silver electrode with about 10 nm in radius has been employed as the scanning electrochemical microscopy (SECM) probe to explore the thickness of a water/nitrobenzene (W/NB) interface, and this value is equal to 0.8 ± 0.1 nm (n = 5). This method of fabrication of nanoelectrodes can be extended to other metal or semiconductor electrodes.

Ion permeability of the nuclear pore complex and ion-induced macromolecular permeation as studied by scanning electrochemical and fluorescence microscopy

Efficient delivery of therapeutic macromolecules and nanomaterials into the nucleus is imperative for gene therapy and nanomedicine. Nucleocytoplasmic molecular transport, however, is tightly regulated by the nuclear pore complex (NPC) with the hydrophobic transport barriers based on phenylalanine and glycine repeats. Herein, we apply scanning electrochemical microscopy (SECM) to quantitatively study the permeability of the NPCs to small probe ions with a wide range of hydrophobicity as a measure of their hydrophobic interactions with the transport barriers. Amperometric detection of the redox-inactive probe ions is enabled by using the ion-selective SECM tips based on the micropipet- or nanopipet-supported interfaces between two immiscible electrolyte solutions. The remarkably high ion permeability of the NPCs is successfully measured by SECM and theoretically analyzed. This analysis demonstrates that the ion permeability of the NPCs is determined by the dimensions and density of the nanopores without a significant effect of the transport barriers on the transported ions. Importantly, the weak ion-barrier interactions become significant at sufficiently high concentrations of extremely hydrophobic ions, i.e., tetraphenylarsonium and perfluorobutylsulfonate, to permeabilize the NPCs to naturally impermeable macromolecules. Dependence of ion-induced permeabilization of the NPC on the pathway and mode of macromolecular transport is studied by using fluorescence microscopy to obtain deeper insights into the gating mechanism of the NPC as the basis of a new transport model.

Electrochemical nanoprobes for single-cell analysis

The measurement of key molecules in individual cells with minimal disruption to the biological milieu is the next frontier in single-cell analyses. Nanoscale devices are ideal analytical tools because of their small size and their potential for high spatial and temporal resolution recordings. Here, we report the fabrication of disk-shaped carbon nanoelectrodes whose radius can be precisely tuned within the range 5-200 nm. The functionalization of the nanoelectrode with platinum allowed the monitoring of oxygen consumption outside and inside a brain slice. Furthermore, we show that nanoelectrodes of this type can be used to impale individual cells to perform electrochemical measurements within the cell with minimal disruption to cell function. These nanoelectrodes can be fabricated combined with scanning ion conductance microscopy probes, which should allow high resolution electrochemical mapping of species on or in living cells.

Double Potential Pulse Chronocoulometry for Detection of Plasma Membrane Cholesterol Efflux at Disk Platinum Microelectrodes

A double potential pulse scheme is reported for observation of cholesterol efflux from the plasma membrane of a single neuron cell. Capillary Pt disk microelectrodes having a thin glass insulator allow the 10 μm diameter electrode and cell to be viewed under optical magnification. The electrode, covalently functionalized with cholesterol oxidase, is positioned in contact with the cell surface resulting in enzyme catalyzed cholesterol oxidation and efflux of cholesterol from the plasma membrane at the electrode contact site. Enzymatically generated hydrogen peroxide accumulates at the electrode/cell interface during a 5 s hold-time and is oxidized during application of a potential pulse. A second, replicate potential pulse is applied 0.5 s after the first potential pulse to gauge background charge prior to significant accumulation of hydrogen peroxide. The difference in charge passed between the first and second potential pulse provides a measure of hydrogen peroxide generated by the enzyme and is an indication of the cholesterol efflux. Control experiments for bare Pt microelectrodes in contact with the cell plasma membrane show difference charge signals in the range of about 7-10 pC. Enzyme-modified electrodes in contact with the plasma membrane show signals in the range of 16-26 pC.