Capillary Electrophoresis

Chiral ligand exchange capillary electrochromatography with dual ligands for enantioseparation of D,L-amino acids

Utilizing block copolymers as coatings, a protocol of chiral ligand exchange capillary electrochromatography (CLE-CEC) protocol was designed and developed with dual ligands for D,L-amino acids enantioseparation. Four block copolymers including poly maleic anhydride-co-styrene-co-N-methacryloyl-L-histidine methyl ester [P(MAn-St-MAH)], poly maleic anhydride-co-styrene-co-N-methacryloyl-L-lysine methyl ester [P(MAn-St-MAL)], poly maleic anhydride-co-styrene-co-N-methacryloyl-L-phenylalanine methyl ester [P(MAn-St-MAP)] and poly maleic anhydride-co-styrene-co-N-methacryloyl-L-threonine methyl ester [P(MAn-St-MAT)] were synthesized by reversible addition fragmentation chain transfer polymerization reaction. Key factors affecting the enantioresolution were optimized, including the concentration of Zn (II) central ion, pH value of buffer solution and monomers of the block copolymers. The enantioresolution of the proposed CLE-CEC system could be enhanced dramatically by employing P(MAn-St-MAH) as the immobilized chiral ligand and by coordinating the synergistic effect of free ligand in buffer solution. The principle of improved enantioresolution of the CLE-CEC system with dual ligands was discussed. Well enantioseparation was successfully realized with 7 pairs of D,L-amino acids enantiomers baseline separation and 5 pairs part separation. For quantitative analysis of D,L-alanine, a good linearity was established in the range of 9.4 μM to 1.5 mM (r² = 0.997) with the limits of detection (LODs) 3.7 μM of D-alanine, 2.0 μM for L-alanine, and limits of quantification (LOQs) 9.0 μM for D-alanine and 6.0 μM for L-alanine. The peak area and migration time reproducibility (n = 6) were 4.1% and 3.5% for D-alanine, 3.7% and 3.1% for L-alanine. Further, the enzyme kinetics study of alanine aminotransferase was investigated with the constructed CLE-CEC system.

Coupling of CE-MS for protein and peptide analysis

The review is focused on the latest developments in the analysis of proteins and peptides by capillary electrophoresis techniques coupled to mass spectrometry. First, the methodology and instrumentation are overviewed. In this section, recent progress in capillary electrophoresis with mass spectrometry interfaces and capillary electrophoresis with matrix-assisted laser desorption/ionization is mentioned, as well as separation tasks. The second part is devoted to applications-mainly bottom-up and top-down proteomics. It is obvious that capillary electrophoresis with mass spectrometry methods are well suited for peptide and protein analysis (proteomic research) and it is described how these techniques are complementary and not competitive with the often used liquid chromatography with mass spectrometry methods.

Relaxation of surface-tethered polymers under moderate confinement

We study the relaxation of surface-tethered polymers in microchannels under moderate confinement (i.e. h ∼ Rg, where h is the channel height and Rg is the radius of gyration of the polymer) by experiments with fluorescence-marked DNA molecules and coupled lattice-Boltzmann/molecular dynamics simulations. The determined scaling exponent suggests that the relaxation is dominated by Zimm-dynamics with significant intra-chain hydrodynamic interactions. The relaxation of the DNA molecules is slower in shallower channels, indicating a pronounced effect of confinement on the longest relaxation time. An experimental correlation is obtained for the longest relaxation time as a function of the molecular contour length and the channel height. Good agreement between the experimental and the simulation results is found.

Sensitive determination of aldehyde metabolites in exhaled breath condensate using capillary electrophoresis with laser-induced fluorescence detection

A novel capillary electrophoresis with laser-induced fluorescence detection method has been developed for the analysis of aldehyde metabolism biomarkers for oxidative stress in exhaled breath condensate (EBC), and fluorescein 5-thiosemicarbazide was used as a derivatization reagent. In a simple capillary zone electrophoresis mode, ten low molecular weight aldehydes (LMWAs) could be well separated within 30 min. The reaction efficiency was doubled by increasing sample solution pH and magnetic stirring, and the LODs of this method reached 0.16-3.4 nM (S/N = 3). Acceptable recoveries (82.1-115%) were obtained for EBC samples, and the RSD data were within 7.9%. This developed method has been applied for the analyses of EBC samples and evaluation of the correlation between smoking and the contents of aldehyde metabolites in EBC. Due to no need of buffer additives and sample preconcentration, this proposed method may provide an appealing alternative for the trace analyses of LMWAs in noninvasive biofluids. Graphical abstract ᅟ.

Wavelength Modulated Back-Scatter Interferometry for Universal, On-Column Refractive Index Detection in Picoliter Volumes

Wavelength-modulated back scatter interferometry (M-BSI) is shown to improve the detection metrics for refractive index (RI) sensing in microseparations. In M-BSI, the output of a tunable diode laser is focused into the detection zone of a separation channel as the excitation wavelength is rapidly modulated. This spatially modulates the observed interference pattern, which is measured in the backscattered direction. Phase-sensitive detection using a split photodiode detector aligned on one fringe of the interference pattern is used to monitor RI changes as analytes are separated. Using sucrose standards, we report a detection limit of 700 μg/L in a 75 μm i.d. capillary at the 3σ level, corresponding to a detection volume of 90 pL. To validate the approach for electrophoretic separations, Na⁺ and Li⁺ were separated and detected with M-BSI and indirect-UV absorbance on the same capillary. A 4 mg/L NaCl and LiCl mixture leads to comparable separation efficiencies in the two detection schemes, with better signal-to-noise in the M-BSI detection, but less baseline stability. The latter arises in part from Joule heating, which influences RI measurements through the thermo-optic properties of the run buffer. To reduce this effect, a 25 μm i.d. capillary combined with active temperature control was used to detect the separation of sucrose, glucose, and lactose with M-BSI. The lack of suitable UV chromophores makes these analytes challenging to detect directly in ultrasmall volumes. Using a 55 mM NaOH run buffer, M-BSI is shown to detect the separation of a mixture of 174 mg/L sucrose, 97 mg/L glucose, and 172 mg/L lactose in a 15 pL detection volume. The universal on-column detection in ultrasmall volumes adds new capabilities for microanalysis platforms, while potentially reducing the footprint and costs of these systems.

Enhanced Peptide Detection Toward Single-Neuron Proteomics by Reversed-Phase Fractionation Capillary Electrophoresis Mass Spectrometry

The ability to detect peptides and proteins in single cells is vital for understanding cell heterogeneity in the nervous system. Capillary electrophoresis (CE) nanoelectrospray ionization (nanoESI) provides high-resolution mass spectrometry (HRMS) with trace-level sensitivity, but compressed separation during CE challenges protein identification by tandem HRMS with limited MS/MS duty cycle. Here, we supplemented ultrasensitive CE-nanoESI-HRMS with reversed-phase (RP) fractionation to enhance identifications from protein digest amounts that approximate to a few mammalian neurons. An ~1 to 20 μg neuronal protein digest was fractionated on a RP column (ZipTip), and 1 ng to 500 pg of peptides were analyzed by a custom-built CE-HRMS system. Compared with the control (no fractionation), RP fractionation improved CE separation (theoretical plates ~274,000 versus 412,000 maximum, resp.), which enhanced detection sensitivity (2.5-fold higher signal-to-noise ratio), minimized co-isolation spectral interferences during MS/MS, and increased the temporal rate of peptide identification by up to ~57%. From 1 ng of protein digest (<5 neurons), CE with RP fractionation identified 737 protein groups (1,753 peptides), or ~480 protein groups (~1,650 peptides) on average per analysis. The approach was scalable to 500 pg of protein digest (~a single neuron), identifying 225 protein groups (623 peptides) in technical triplicates, or 141 protein groups on average per analysis. Among identified proteins, 101 proteins were products of genes that are known to be transcriptionally active in single neurons during early development of the brain, including those involved in synaptic transmission and plasticity and cytoskeletal organization. Graphical abstract ᅟ.

Tributyl phosphate assisted hollow-fiber liquid-phase microextraction of short-chain fatty acids in microbial degradation fluid using capillary electrophoresis-contactless coupled conductivity detection

A tributyl phosphate assisted hollow-fiber liquid-phase microextraction coupled with capillary electrophoresis-contactless coupled conductivity detection (HF-LPME/CE-C⁴D) method has been developed for trace analysis of common short-chain fatty acids (SCFAs) without derivatization. Under the optimum conditions, ten SCFAs including a pair of isomers were well separated from their homologous FAs and the main coexisting inorganic anions within 40 min. Tributyl phosphate assisted HF-LPME produced excellent purification and enrichment for the model sample with high-salt matrix, microbial degradation fluid, and the limits of detection could reach 0.072-0.67 ng/mL (S/N = 3). Owing to its high sensitivity, good linearity, and acceptable recovery, this proposed method provided a sensitive and environment-friendly alternative for trace analysis of SCFAs in complicated samples.

Determination of the stereoisomers in aqueous medium and serum and validation studies of racemic aminoalkanol derivatives of 1,7-dimethyl-8,9-diphenyl-4-azatricyclo[5.2.1.0(2,6) ]dec-8-ene-3,5,10-trione, potential new anticancer drugs, by capillary electrophoresis

A new method for the determination of the stereoisomers, in aqueous medium and serum, of the racemic aminoalkanol derivatives I and II of 1,7-dimethyl-8,9-diphenyl-4-azatricyclo[5.2.1.0(2,6) ]dec-8-ene-3,5,10-trione, which were found in earlier studies to be potential anticancer drugs, was developed and validated. The optimized conditions included 25 mM phosphate buffer adjusted to pH 2.5, containing γ-cyclodextrin at a concentration of 5% m/v, as background electrolyte, an applied voltage of +10 kV, and a temperature of 25°C. Separations were carried out using a fused-silica capillary. The developed method of determining the enantiomers of compounds I(S), I(R) and II(S), II(R) was characterized by the following parameters: a detection time within 10.8 min, a detection limit in the range of 141.2-141.7 ng/mL using the UV absorption detection at 200 nm. Good linearity (R(2) = 0.9989-0.9998) was achieved within the range of concentrations studied. A very good extraction yield of 95.4-99.7% was achieved, and recoveries were carried out from both aqueous solutions and matrix serum. The repeatability of the method for peak areas with an accuracy of the determined concentrations of the analytes in the range of 1.43-1.89%, and limits of quantitation in the range of 432.4-436.3 ng/mL were achieved.

A rapid high-resolution method for resolving DNA topoisomers

OBJECTIVE

Agarose gel electrophoresis has been the mainstay technique for the analysis of DNA samples of moderate size. In addition to separating linear DNA molecules, it can also resolve different topological forms of plasmid DNAs, an application useful for the analysis of the reactions of DNA topoisomerases. However, gel electrophoresis is an intrinsically low-throughput technique and suffers from other potential disadvantages. We describe the application of the QIAxcel Advanced System, a high-throughput capillary electrophoresis system, to separate DNA topoisomers, and compare this technique with gel electrophoresis.

RESULTS

We prepared a range of topoisomers of plasmids pBR322 and pUC19, and a 339 bp DNA minicircle, and compared their separation by gel electrophoresis and the QIAxcel System. We found superior resolution with the QIAxcel System, and that quantitative analysis of topoisomer distributions was straightforward. We show that the QIAxcel system has advantages in terms of speed, resolution and cost, and can be applied to DNA circles of various sizes. It can readily be adapted for use in compound screening against topoisomerase targets.

Single-Shot Top-Down Proteomics with Capillary Zone Electrophoresis-Electrospray Ionization-Tandem Mass Spectrometry for Identification of Nearly 600 Escherichia coli Proteoforms

Capillary zone electrophoresis-electrospray ionization-tandem mass spectrometry (CZE-ESI-MS/MS) has been recognized as an invaluable platform for top-down proteomics. However, the scale of top-down proteomics using CZE-MS/MS is still limited due to the low loading capacity and narrow separation window of CZE. In this work, for the first time we systematically evaluated the dynamic pH junction method for focusing of intact proteins during CZE-MS. The optimized dynamic pH junction-based CZE-MS/MS approached a 1 μL loading capacity, 90 min separation window, and high peak capacity (∼280) for characterization of an Escherichia coli proteome. The results represent the largest loading capacity and the highest peak capacity of CZE for top-down characterization of complex proteomes. Single-shot CZE-MS/MS identified about 2800 proteoform-spectrum matches, nearly 600 proteoforms, and 200 proteins from the Escherichia coli proteome with spectrum-level false discovery rate (FDR) less than 1%. The number of identified proteoforms in this work is over three times higher than that in previous single-shot CZE-MS/MS studies. Truncations, N-terminal methionine excision, signal peptide removal, and some post-translational modifications including oxidation and acetylation were detected.

Two-Dimensional Capillary Electrophoresis with On-Line Sample Preparation and Cyclodextrin Separation Environment for Direct Determination of Serotonin in Human Urine

An advanced two-dimensional capillary electrophoresis method, based on on-line combination of capillary isotachophoresis and capillary zone electrophoresis with cyclodextrin additive in background electrolyte, was developed for effective determination of serotonin in human urine. Hydrodynamically closed separation system and large bore capillaries (300–800 µm) were chosen for the possibility to enhance the sample load capacity, and, by that, to decrease limit of detection. Isotachophoresis served for the sample preseparation, defined elimination of sample matrix constituents (sample clean up), and preconcentration of the analyte. Cyclodextrin separation environment enhanced separation selectivity of capillary zone electrophoresis. In this way, serotonin could be successfully separated from the rest of the sample matrix constituents migrating in capillary zone electrophoresis step so that human urine could be directly (i.e., without any external sample preparation) injected into the analyzer. The proposed method was successfully validated, showing favorable parameters of sensitivity (limit of detection for serotonin was 2.32 ng·mL⁻¹), linearity (regression coefficient higher than 0.99), precision (repeatability of the migration time and peak area were in the range of 0.02–1.17% and 5.25–7.88%, respectively), and recovery (ranging in the interval of 90.0–93.6%). The developed method was applied for the assay of the human urine samples obtained from healthy volunteers. The determined concentrations of serotonin in such samples were in the range of 12.4–491.2 ng·mL⁻¹ that was in good agreement with literature data. This advanced method represents a highly effective, reliable, and low-cost alternative for the routine determination of serotonin as a biomarker in human urine.

Detection of human neutrophil elastase by aptamer affinity capillary electrophoresis coupled with laser-induced fluorescence using specified site fluorescently labeled aptamer

As a multifunctional serine protease, human neutrophil elastase (HNE) plays critical roles in a variety of physiopathological processes, such as acute lung injury, emphysema, atherosclerosis, and arthritis. The quantification of HNE is important in many applications. In this paper, we report an aptamer affinity capillary electrophoresis coupled with laser-induced fluorescence (CE-LIF) assay for detection of HNE using a tetramethylrhodamine (TMR)-labeled DNA aptamer probe. The affinity complex of HNE and DNA aptamer probe was well separated from the unbound aptamer probe in CE separation based on the difference of electrophoretic mobility. Broad complex peaks appeared due to possible multiple binding. The 45-mer aptamer having TMR labeling on the 40th T base was used as affinity probe, as larger complex peaks were obtained. We investigated the effects of various metal cations (Na⁺, K⁺, and Mg²⁺) in sample buffer on the binding of HNE and the aptamer in CE-LIF analysis. The presence of Na⁺, K⁺, or Mg²⁺ in sample buffer caused a decrease of complex peaks, and Mg²⁺ showed a larger effect. Under optimized conditions, this aptamer CE-LIF assay enabled the detection of HNE at 0.5 nM. This assay showed good specificity and allowed for detection of HNE spiked in diluted human serum sample. Graphical abstract The complex of HNE and DNA aptamer probe was isolated from the unbound aptamer probe in CE separation due to difference of electrophoretic mobility, allowing a CE-LIF assay for HNE.

Recent developments in capillary and microchip electroseparations of peptides (2015-mid 2017)

The review brings a comprehensive overview of recent developments and applications of high performance capillary and microchip electroseparation methods (zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) to analysis, microscale isolation, purification, and physicochemical and biochemical characterization of peptides in the years 2015, 2016, and ca. up to the middle of 2017. Advances in the investigation of electromigration properties of peptides and in the methodology of their analysis (sample preseparation, preconcentration and derivatization, adsorption suppression and EOF control, and detection) are described. New developments in particular CE and CEC methods are presented and several types of their applications to peptide analysis are reported: qualitative and quantitative analysis, determination in complex (bio)matrices, monitoring of chemical and enzymatical reactions and physical changes, amino acid, sequence and chiral analysis, and peptide mapping of proteins. Some micropreparative peptide separations are shown and capabilities of CE and CEC methods to provide important physicochemical characteristics of peptides are demonstrated.

Electric-field-induced stretching of surface-tethered polyelectrolytes in a microchannel

We study the stretching of a surface-tethered polyelectrolyte confined between parallel surfaces under the application of a dc electric field. We explore the influence of the electric-field strength, the length of the polyelectrolyte, and the degree of confinement on the conformation of the polyelectrolyte by single-molecule experiments and coarse-grained coupled lattice-Boltzmann molecular-dynamics simulations. The fractional extension of the polyelectrolyte is found to be a universal function of the product of the applied electric field and the molecular contour length, which is explained by simple scaling arguments. The degree of confinement does not have any significant influence on the stretching. We also confirm that an electrohydrodynamic equivalence principle relating the stretching in an electric field to that in a flow field is applicable.

Enhancing the Affinity of Anti-Human α-Thrombin 15-mer DNA Aptamer and Anti-Immunoglobulin E Aptamer by PolyT Extension

Aptamer affinity capillary electrophoresis-laser-induced fluorescence (CE-LIF) for protein detection takes advantage of aptamers for their ease of synthesis and labeling, small size, and having many negative charges. Its success relies on the high binding affinity of aptamers. One 15-mer DNA aptamer (5'-GGT TGG TGT GGT TGG-3', Apt15) shows desirable specificity for human α-thrombin, an important enzyme with multiple functions in blood. However, Apt15 has weak binding affinity, and the use of Apt15 in affinity CE-LIF analysis remains challenging. Here we reported that extension of Apt15 at the 3'-end with a polyT tail having length of 18 T or longer significantly enhanced its affinity and enabled a well-isolated and stable peak for thrombin-aptamer complex in affinity CE. It was likely that the improvement of binding affinity resulted from double binding, an additional interaction of the polyT tail with thrombin in addition to the Apt15 section binding to thrombin. With dye-labeled Apt15 having a T₂₅ tail, we achieved detection of thrombin at concentrations as low as 0.1 nM by affinity CE-LIF. This aptamer probe specifically bound to human α-thrombin, showing negligible affinity for human β- and γ-thrombin, which are proteolyzed derivatives of human alpha α-thrombin and share similar structure. This strategy of adding a polyT extension also enhanced the binding affinity of anti-immunoglobulin E aptamer in CE-LIF analysis, showing that the affinity enhancement approach is not limited to the thrombin-binding aptamer and has potential for more applications in bioanalysis.

Recent advances in protein analysis by capillary and microchip electrophoresis

This review article describes the significant recent advances in the analysis of proteins by capillary and microchip electrophoresis during the period from mid-2014 to early 2017. This review highlights the progressions, new methodologies, innovative instrumental modifications, and challenges for efficient protein analysis in human specimens, animal tissues, and plant samples. The protein analysis fields covered in this review include analysis of native, reduced, and denatured proteins in addition to Western blotting, protein therapeutics and proteomics.

Affinity capillary electrophoresis with laser induced fluorescence detection for thrombin analysis using nuclease-resistant RNA aptamers

Aptamer affinity capillary electrophoresis coupled with laser-induced fluorescence (CE-LIF) combines the advantages of affinity aptamer, rapid CE separation, and high sensitivity detection. Here we reported an affinity CE-LIF assay for thrombin by using a fluorophore-labeled RNA aptamer containing 2'-fluoro modification in sugar rings of pyrimidine nucleotides (C and U) as affinity ligand. This RNA aptamer has high binding affinity, specificity and biostability. Thrombin at 0.2nM was successfully detected. This RNA aptamer allowed for the detection of thrombin spiked in diluted human serum sample due to the nuclease resistance. The RNA aptamer has comparable binding affinity to a 29-mer DNA aptamer for thrombin, and the binding site of the RNA aptamer on thrombin partially overlaps with the binding site of the 29-mer DNA aptamer on thrombin. It shows the nuclease-resistant RNA aptamers are promising in assays for thrombin.

Analysis of proteins and peptides by electromigration methods in microchips

This review presents the developments and applications of microchip electromigration methods in the separation and analysis of peptides and proteins in the period 2011-mid-2016. The developments in sample preparation and preconcentration, microchannel material, and surface treatment are described. Separations by various microchip electromigration methods (zone electrophoresis in free and sieving media, affinity electrophoresis, isotachophoresis, isoelectric focusing, electrokinetic chromatography, and electrochromatography) are demonstrated. Advances in detection methods are reported and novel applications in the areas of proteomics and peptidomics, quality control of peptide and protein pharmaceuticals, analysis of proteins and peptides in biomatrices, and determination of physicochemical parameters are shown.

Recent Advances in Microscale Western Blotting

Western blotting is a ubiquitous tool used extensively in the clinical and research settings to identify proteins and characterize their levels. It has rapidly become a mainstay in research laboratories due to its specificity, low cost, and ease of use. The specificity arises from the orthogonal processes used to identify proteins. Samples are first separated based on size and then probed with antibodies specific for the protein of interest. This confirmatory approach helps avoid pitfalls associated with antibody cross-reactivity and specificity issues. While the technique has evolved since its inception, the last decade has witnessed a paradigm shift in Western blotting technology. The introduction of capillary and microfluidic platforms has significantly decreased time and sample requirements while enabling high-throughput capabilities. These advances have enabled Western analysis down to the single cell level in highly parallel formats, opening vast new opportunities for studying cellular heterogeneity. Recent innovations in microscale Western blotting are surveyed, and the potential for enhancing detection using advances in label-free biosensing is briefly discussed.

Recent progress of sample stacking in capillary electrophoresis (2014-2016)

The term "sample stacking" comprises a relatively broad spectrum of techniques that already form an almost inherent part of the methodology of CZE. Their principles are different but the effect is the same: concentration of a diluted analyte into a narrow zone and considerable increase of the method sensitivity. This review brings a survey of papers on electrophoretic sample stacking published approximately since the second quarter of 2014 till the first quarter of 2016. It is organized according to the principles of the stacking methods and includes chapters aimed at the concentration adjustment principle (Kohlrausch stacking), techniques based on pH changes, micellar methods, and other stacking techniques. Not reviewed are papers on transient ITP that are covered by another review in this issue.

Capillary electrophoresis coupled with in-column fiber-optic laser-induced fluorescence detection for the rapid separation of neodymium

In this study, in-column fiber-optic (ICFO) laser-induced fluorescence (LIF) detection technique is coupled with capillary electrophoresis (CE) for the rapid separation of neodymium for the first time. The effects of buffer concentration, buffer pH, and separation voltage on the CE behaviors, including electrophoretic efficiency and detection sensitivity, are investigated in detail. Under the optimal condition determined in this study (15 mM borate buffer, pH 10.50, separation voltage 24 kV), neodymium could be separated effectively from the neighboring lanthanides (praseodymium and samarium) within several minutes, and the limit of detection for neodymium is estimated to be at the ppt level. The ICFO-LIF-CE system assembled in this study exhibits unique performance characteristics such as low cost and flexibility. Meanwhile, the separation efficiency and detection sensitivity of the assembled CE system are comparable to or somewhat better than those obtained in the previous traditional CE systems, indicating the potential of the assembled CE system for practical applications in the fields of spent nuclear fuel analysis, nuclear waste disposal/treatment, and nuclear forensics.