Nanozyme Sensor Arrays Based on Heteroatom-Doped Graphene for Detecting Pesticides

Direct and Specific Detection of Glyphosate Using a Phosphatase-like Nanozyme-Mediated Chemiluminescence Strategy

Most organophosphorus pesticide (OP) sensors reported in the literature rely on the inhibition effect of OPs on the activity of acetylcholinesterase (AChE), which suffer from the drawbacks of lack of selective recognition of OPs, high cost, and poor stability. Herein, we proposed a novel chemiluminescence (CL) strategy for the direct detection of glyphosate (an organophosphorus herbicide) with high sensitivity and specificity, which is based on the porous hydroxy zirconium oxide nanozyme (ZrO_X-OH) obtained via a facile alkali solution treatment of UIO-66. ZrO_X-OH displayed excellent phosphatase-like activity, which could catalyze the dephosphorylation of 3-(2'-spiroadamantyl)-4-methoxy-4-(3'-phosphoryloxyphenyl)-1,2-dioxetane (AMPPD) to generate strong CL. The experimental results showed that the phosphatase-like activity of ZrO_X-OH is closely related to the content of hydroxyl groups on their surface. Interestingly, ZrO_X-OH with phosphatase-like properties exhibited a unique response to glyphosate because of the consumption of the surface hydroxyl group by the unique carboxyl group of glyphosates and was thus employed to develop a CL sensor for direct and selective detection of glyphosate without using bio-enzymes. The recovery for glyphosate detection of cabbage juice ranged from 96.8 to 103.0%. We believe that the as-proposed CL sensor based on ZrO_X-OH with phosphatase-like properties supplies a simpler and more highly selective approach for OP assay and provides a new method for the development of CL sensors for the direct analysis of OPs in real samples.

Colorimetric Sensors for Chemical and Biological Sensing Applications

Colorimetric sensors have been widely used to detect numerous analytes due to their cost-effectiveness, high sensitivity and specificity, and clear visibility, even with the naked eye. In recent years, the emergence of advanced nanomaterials has greatly improved the development of colorimetric sensors. This review focuses on the recent (from the years 2015 to 2022) advances in the design, fabrication, and applications of colorimetric sensors. First, the classification and sensing mechanisms of colorimetric sensors are briefly described, and the design of colorimetric sensors based on several typical nanomaterials, including graphene and its derivatives, metal and metal oxide nanoparticles, DNA nanomaterials, quantum dots, and some other materials are discussed. Then the applications, especially for the detection of metallic and non-metallic ions, proteins, small molecules, gas, virus and bacteria, and DNA/RNA are summarized. Finally, the remaining challenges and future trends in the development of colorimetric sensors are also discussed.

Iron oxides based nanozyme sensor arrays for the detection of active substances in licorice

With the increasing applications of traditional Chinese medicines worldwide, authenticity identification and quality control are significant for them to go global. Licorice is a kind of medicinal material with various functions and wide applications. In this work, colorimetric sensor arrays based on iron oxide nanozymes were constructed to discriminate active indicators in licorice. Fe₂O₃, Fe₃O₄, and His-Fe₃O₄ nanoparticles were synthesized by a hydrothermal method, possessing excellent peroxidase-like activity that can catalyze the oxidation of 3,3',5,5' -tetramethylbenzidine (TMB) in the presence of H₂O₂ to produce a blue product. When licorice active substances were introduced in the reaction system, they showed competitive effect on peroxidase-mimicking activity of nanozymes, resulting in inhibitory effect on the oxidation of TMB. Based on this principle, four licorice active substances including glycyrrhizic acid, liquiritin, licochalcone A, and isolicoflavonol with the concentration ranging from 1 μM to 200 μM were successfully discriminated by the proposed sensor arrays. This work supplies a low cost, rapid and accurate method for multiplex discrimination of active substances to guarantee the authenticity and quality of licorice, which is also expected to be applied to distinguish other substances.

Oriented Design of Transition-Metal-Oxide Hollow Multishelled Micropolyhedron Derived from Bimetal-Organic Frameworks for the Electrochemical Detection of Multipesticide Residues

Transition-metal oxides (TMOs) with a hollow multishelled structure have emerged as highly potential materials for high-performance electrochemical sensing, benefiting from their superior electronic conductivity, exceptionally large specific surface area, excellent stability, and electrochemistry properties. In particular, binary TMOs are expected to outperform unitary TMOs due to the synergistic effect of the different metals. Herein, MnCo₂O_4.5 hollow quadruple-shelled porous micropolyhedrons (MnCo₂O_4.5 HoQS-MPs) were prepared and employed to construct an ultrasensitive sensing platform for a multipesticide assay. Profiting from complex hollow interior structures and abundant active sites, the MnCo₂O_4.5 HoQS-MPs manifest outstanding electrochemical properties as electrode materials for the pesticide assay. The MnCo₂O_4.5 HoQS-MP-based biosensor demonstrated remarkable performance for monocrotophos, methamidophos, and carbaryl detection, with wide linear ranges, as well as low detection limits. This work unveils a new pathway for the ultrasensitive detection of pesticides and demonstrates tremendous potential for detecting other environmentally deleterious chemicals.

Self-assembled Cr2O3@nanogel/Au nanozymes to simulate peroxidase activity as a H2O2 sensor

The low temperature solvothermal method synthesized Cr₂O₃ NPs has not only peroxidase activity, but also oxidase activity. Then, the oxidase activity of Cr₂O₃ NPs is effectively shielded by nanogel immobilization using three monomers acrylamide, NIPAAM (N-isopropylacrylamide) and MBA (N,N'-methylene bisacrylamide) in HEPES (4-(2-hydroxyerhyl)piperazine-1-erhanesulfonic acid) buffer. Ultimately, the enzymatic activity of Cr₂O₃@nanogel/Au is significantly enhanced after doping Au NPs by SERS (Surface Enhanced Raman Spectroscopy) evaluation. A SERS strategy was proposed for the detection of H₂O₂ by Cr₂O₃@nanogel/Au. The linear range was 10^-8 mol·L^-1-10^-1 mol·L^-1.

Applications of Nanomaterials in Dentistry: A Review

Aim and Objective

Currently, the major priority in the field of nanotechnology or nanoscience is research and development at the atomic- or molecular-level sciences. Almost every aspects of human health, including pharmaceutical, clinical research and analysis, and supplemental immunological systems, are significantly impacted by it. Diverse dental applications to the realm of nanotechnology, which also reflect developments in material sciences, have given rise to the field of nanodentistry and nanocatalytic drug development, especially in oral nanozyme research and application. This review is aimed to provide readers an in-depth analysis of nanotechnology's characteristics, varied qualities, and applications toward dentistry.

Materials and Methods

A query was carried out in PubMed and Google Scholar databases for the articles published from 2007 to 2022 using the keywords/MESH term nanomaterials, dentistry, nanoenzymes, metals, and antibacterial activity. Data extraction and evidence synthesis have been performed by three researchers individually.

Results

A total of 901 articles have been extracted, out of which 108 have been removed due to repetitions and overlapping. After further screening following exclusion and inclusion criteria, 74 papers were considered to be pertinent and that primarily addressed dental nanotechnology were chosen. Further, the data havebeen extracted and interpreted for the review. The results of the review indicated that the development of multifunctional nanozymes has been continuously assessed in relation to oro-dental illnesses to show the significant impact that nanozymes have on oral health.

Conclusion

As evidenced by the obtained results, with the advent of ongoing breakthroughs in nanotechnology, dental care could be improved with advanced preventive measures.

Nanozyme-based pollutant sensing and environmental treatment: Trends, challenges, and perspectives

Nanozymes are defined as nanomaterials exhibiting enzyme-like properties, and they possess both catalytic functions and nanomaterial's unique physicochemical characteristics. Due to the excellent stability and improved catalytic activity in comparison to natural enzymes, nanozymes have established a wide base for applications in environmental pollutants monitoring and remediation. Nanozymes have been applied in the detection of heavy metal ions, molecules, and organic compounds, both quantitatively and qualitatively. Additionally, within the natural environment, nanozymes can be employed for the degradation of organic and persistent pollutants such as antibiotics, phenols, and textile dyes. Further, the potential sphere of applications for nanozymes traverses from indoor air purification to anti-biofouling agents, and even they show promise in combatting pathogenic bacteria. However, nanozymes may have inherent toxicity, which can restrict their widespread utility. Thus, it is important to evaluate and monitor the interaction and transformation of nanozymes towards biosphere damage when employed within the natural environment in a cradle-to-grave manner, to assure their utmost safety. In this context, various studies have concluded that the green synthesis of nanozymes can efficiently overcome the toxicity limitations in real life applications, and nanozymes can be well utilized in the sensing and degradation of several toxic pollutants including metal ions, pesticides, and chemical warfare agents. In this seminal review, we have explored the great potential of nanozymes, whilst addressing a range of concerns, which have often been overlooked and currently restrict widespread applications and commercialization of nanozymes.

Determination Methods of the Risk Factors in Food Based on Nanozymes: A Review

Food safety issues caused by foodborne pathogens, chemical pollutants, and heavy metals have aroused widespread concern because they are closely related to human health. Nanozyme-based biosensors have excellent characteristics such as high sensitivity, selectivity, and cost-effectiveness and have been used to detect the risk factors in foods. In this work, the common detection methods for pathogenic microorganisms, toxins, heavy metals, pesticide residues, veterinary drugs, and illegal additives are firstly reviewed. Then, the principles and applications of immunosensors based on various nanozymes are reviewed and explained. Applying nanozymes to the detection of pathogenic bacteria holds great potential for real-time evaluation and detection protocols for food risk factors.

Heteroatom Codoped Graphene: The Importance of Nitrogen

Although graphene has exceptional properties, they are not enough to solve the extensive list of pressing world problems. The substitutional doping of graphene using heteroatoms is one of the preferred methods to adjust the physicochemical properties of graphene. Much effort has been made to dope graphene using a single dopant. However, in recent years, substantial efforts have been made to dope graphene using two or more dopants. This review summarizes all the hard work done to synthesize, characterize, and develop new technologies using codoped, tridoped, and quaternary doped graphene. First, I discuss a simple question that has a complicated answer: When can an atom be considered a dopant? Then, I briefly discuss the single atom doped graphene as a starting point for this review's primary objective: codoped or dual-doped graphene. I extend the discussion to include tridoped and quaternary doped graphene. I review most of the systems that have been synthesized or studied theoretically and the areas in which they have been used to develop new technologies. Finally, I discuss the challenges and prospects that will shape the future of this fascinating field. It will be shown that most of the graphene systems that have been reported involve the use of nitrogen, and much effort is needed to develop codoped graphene systems that do not rely on the stabilizing effects of nitrogen. I expect that this review will contribute to introducing more researchers to this fascinating field and enlarge the list of codoped graphene systems that have been synthesized.

Lighting Up Agricultural Sustainability in the New Era through Nanozymology: An Overview of Classifications and Their Agricultural Applications

With the concept of sustainable agriculture receiving increasing attention from humankind, nanozymes, nanomaterials with enzyme-like activity but higher environmental endurance and longer-term stability than natural enzymes, have enabled agricultural technologies to be reformative, economic, and portable. Benefiting from their multiple catalytic activities and renewable nanocharacteristics, nanozymes can shine in agricultural scenarios using enzyme engineering and nanoscience, acting as sustainable toolboxes to improve agricultural production and reduce the risk to agricultural systems. Herein, we comprehensively discuss the classifications of nanozymes applied in current agriculture, including peroxidase-like, oxidase-like, catalase-like, superoxide dismutase-like, and laccase-like nanozymes, as well as their biocatalytic mechanisms. Especially, different applications of nanozymes in agriculture are deeply reviewed, covering crop protection and nutrition, agroenvironmental remediation and monitoring, and agroproduct quality monitoring. Finally, the challenges faced by nanozymes in agricultural applications are proposed, and we expect that our review can further enhance agricultural sustainability through nanozymology.

Portable and Label-Free Sensor Array for Discriminating Multiple Analytes via a Handheld Gas Pressure Meter

Cross-reactive sensor arrays are useful for discriminating multiple analytes in a complex sample. Herein, a portable and label-free gas pressure sensor array was proposed for multiplex analysis via a handheld gas pressure meter. It is based on the interaction diversity of analytes with catalase-like nanomaterials, including Pt nanoparticles (PtNP), Co₃O₄ nanosheets (Co₃O₄NS), and Pt-Co alloy nanosheets (PtCoNS), respectively. Thus, the diverse influence of analytes on the catalase-like activity could be output as the difference in the gas pressure. By using principal component analysis, eight proteins were well distinguished by the gas pressure sensor array at the 10 nM level within 12 min. Moreover, different concentrations of proteins and mixtures of proteins could likewise be discriminated. More importantly, the effective discrimination of proteins in human serum and discrimination of five kinds of cells further confirmed the potential of the gas pressure sensor array. Therefore, it provides a portable, cheap, sensitive, and label-free gas pressure sensor array, which is totally different from the reported sensor arrays and holds great potential for portable and cheap discrimination of multiple analytes.

A portable smartphone-based detection of glyphosate based on inhibiting peroxidase-like activity of heptanoic acid/Prussian blue decorated Fe3O4 nanoparticles

The rapid and onsite detection of glyphosate in tobacco products is still a great challenge. In this study, a novel smartphone-assisted sensing platform for the detection of glyphosate has been successfully proposed through the peroxidase-like activity of Fe3O4-based nanozyme. Heptanoic acid/Prussian blue (PB) decorated Fe3O4 nanoparticles (Fe3O4@C7/PB) could catalyze and oxidize 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS, colorless) into a steel blue colored product in the presence of hydrogen peroxide. Glyphosate could specifically inhibit the peroxidase-like activity of Fe3O4@C7/PB by occupying the active site, thereby the glyphosate detection could be accomplished within 10 min by monitoring the color change of ABTS. This study has developed a smartphone-based portable detection platform for online analysis of glyphosate with a detection limit of 0.1 μg mL-1. The absorbance response curve of glyphosate showed good linearity in the concentration range of 0.125-15 μg mL-1 at 415, 647, and 730 nm. Moreover, by employing a co-precipitation technology and inhibiting the peroxidase-like activity, the glyphosate analysis would be less affected by the tobacco sample matrix. The nanosensor possesses excellent selectivity and anti-interference ability, which has application value in actual samples for onsite screening.

Irradiation-Induced Synthesis of Ag/ZnO Nanostructures as Surface-Enhanced Raman Scattering Sensors for Sensitive Detection of the Pesticide Acetamiprid

Detecting pesticides using techniques that involve simple fabrication methods and conducting the detection at very low levels are challenging. Herein, we report the detection of acetamiprid at the quadrillionth level using surface-enhanced Raman scattering (SERS). The SERS chip comprises Ag nanoparticles deposited on a tetrapod structure of ZnO coated onto indium tin oxide glass (denoted as Ag@ZnO-ITO). Controlled Ag decoration of ZnO occurs via irradiation-induced synthesis. The morphology of the surface plays a significant role in achieving an enhanced SERS performance for acetamiprid detection. 4,4'-Dipyridyl (DPY) is used to investigate synthesis conditions for the chip, leading to an optimal irradiation time of 60 min. Furthermore, the enhancement factor for acetamiprid on Ag@ZnO-ITO is higher than 107. These results demonstrate that SERS sensors have the potential for practical use in acetamiprid detection.

Sulfur-Doped Graphene-Based Electrochemical Sensors for Fast and Sensitive Determination of (R)-(+)-Limonene from Beverages

Two sensors based on sulfur-doped graphene, a gold nanoparticle paste modified with 5,10,15,20-tetraphenyl-21H,23H-porphine and 5,10,15,20-tetrakis (pentafluorophenyl chloride)-21H,23H-iron (III) porphyrin, were proposed for the determination of R-limonene in beverages (triple sec liqueur and limoncello). Differential pulse voltammetry was the method used to characterize and validate the proposed sensors. The response characteristics showed that the detection limits for both sensors were 3 × 10^-6 mol L^-1, while the quantification limits were 1 × 10^-5 mol L^-1. Both sensors can be used to determine R-limonene in a concentration range between 1 × 10^-5-6 × 10^-4 mol L^-1 for TPP/AuNPs-S-Gr and 1 × 10^-5-1 × 10^-3 mol L^-1 for Fe(TPFPP)Cl/AuNPs-S-Gr. The highest sensitivity (0.7068 µA/mol L^-1) was recorded when the TPP/AuNPs-S-Gr sensor was used, proving that the electrocatalytic effect of this electrocatalyst is higher compared to that of Fe(TPFPP)Cl/AuNPs-S-Gr. High recoveries (values greater than 99.00%) and low RSD values (%) (below 5.00%) were recorded for both sensors when used to determine R-limonene in triple sec liqueur and limoncello.

Adsorption of Pesticides, Antibiotics and Microcystin-LR by Graphene and Hexagonal Boron Nitride Nano-Systems: A Semiempirical PM7 and Theoretical HSAB Study

In recent years, graphene (CC) and hexagonal boron nitride (h-BN) have been widely used in water purification and environmental remediation because of their unique physical and chemical properties. Therefore, based on the reaction enthalpy, equilibrium structure, atomic charge, molecular, orbital and electronic spectrum provided by a semiempirical PM7 method, the adsorption of pesticides, antibiotics and microcystin-LR on graphene and hexagonal boron nitride (h-BN) nano-systems was examined. For the adsorption of diazinon, parathion, oxacillin and ciprofloxacin, the results show that as the bond length decreases and the atomic partial charge increases, the adsorption energy increases. The removal efficiency for antibiotics is higher than that for pesticides. Regarding the co-adsorption of pesticides/antibiotics and microcystin-LR on nano-systems, hydrogen bonds play a crucial role in stabilizing the whole structure. In addition, the non-covalent interaction (NCI) diagrams show the adsorption strength of the nano-systems to the pesticides/antibiotics. The energy gap and HSAB global descriptors are calculated based on the energy values of HOMO and LUMO. It is proved that the graphene nano-system has excellent electron-accepting ability, and suitable sensor materials can be designed.

A two-step strategy for simultaneous dual-mode detection of methyl-paraoxon and Ni (Ⅱ)

Exogenous pollution of Chinese medicinal materials by pesticide residues and heavy metal ions has attracted great attention. Relying on the rapid development of nanotechnology and multidisciplinary fields, fluorescent techniques have been widely applied in contaminant detection and pollution monitoring due to their advantages of simple preparation, low cost, high throughput and others. Most importantly, synchronous detection of multi-targets has always been pursued as one of the major goals in the design of fluorescent probes. Herein, we firstly develop a simultaneous sensing method for methyl-paraoxon (MP) and Nickel ion (Ni, Ⅱ) by using carbon based fluorescent nanocomposite with ratiometric signal readout and nanozyme. Notably, the designed system showed excellent effectiveness even when the two pollutants co-exist. Under the optimum conditions, this method provides low limits of detection of 1.25 µM for methyl-paraoxon and 0.01 µM for Ni (Ⅱ). To further verify the reliability, recovery studies of these two analytes were performed on ginseng radix et rhizoma, nelumbinis semen, and water samples. In addition, smartphone-based visual analysis has been introduced to expand its applicability in point of care detection. This work not only expands the application of the dual-mode approach to pollutant detection, but also provides insights into the analysis of multiple pollutants in a single assay.

Recent advances in biomedical applications of 2D nanomaterials with peroxidase-like properties

Significant progress has been made in developing two-dimensional (2D) nanomaterials owing to their ultra-thin structure, high specific surface area, and many other advantages. Recently, 2D nanomaterials with enzyme-like properties, especially peroxidase (POD)-like activity, are highly desirable for many biomedical applications. In this review, we first classify the types of 2D POD-like nanomaterials and then summarize various strategies for endowing 2D nanomaterials with POD-like properties. Representative examples of biomedical applications are reviewed, emphasizing in antibacterial, biosensing, and cancer therapy. Last, the future challenges and prospects of 2D POD-like nanomaterials are discussed. This review is expected to provide an in-depth understanding of 2D POD-like materials for biomedical applications.

In situ synthesis of Co-doped MoS2 nanosheet for enhanced mimicking peroxidase activity

To enhance the catalytic activity of two-dimensional layered materials as versatile materials, the modification of transition metal dichalcogenide nanosheets such as MoS₂ by doping with heteroatoms has drawn great interests. However, few reports are available on the study of the enzyme-like activity of doped MoS₂. In this study, a facile in situ hydrothermal method for the preparation of various ultrathin transition metals (Fe, Cu, Co, Mn, and Ni) doped MoS₂ nanosheets has been reported. Through the density functional theory (DFT) and steady-state kinetic analysis, the Co-doped MoS₂ nanosheets exhibited the highest peroxidase-like catalytic activity among them. Furthermore, a typical colorimetric assay for H₂O₂ was presented based on the catalytic oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to a blue product (oxTMB) by Co-MoS₂. The proposed colorimetric method showed excellent tolerance under extreme conditions and a broad linear range from 0.0005 to 25 mM for H₂O₂ determination. Concerning the practical application, in situ detection of H₂O₂ generated from SiHa cells was also fulfilled, fully confirming the great practicability of the proposed method in biosensing fields.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10853-022-07201-z.

Prussian Blue Nanoparticle Supported MoS2 Nanocomposites as a Peroxidase-Like Nanozyme for Colorimetric Sensing of Dopamine

An abnormal level of dopamine (DA) is usually related to neurological disorders, including Parkinson's disease. Herein, cubic-shaped, Prussian blue nanoparticle-supported MoS2 nanocomposites (MoS2-CPBNPs) were prepared as peroxidase-like nanozymes for the label-free, colorimetric detection of DA. As expected, the as-prepared MoS2-CPBNPs nanozymes have outstanding peroxidase-like mimicking activity, which can catalyze 3,3',5,5'-Tetramethylbenzidine (TMB) to generate blue, oxidized TMB in the presence of hydrogen peroxide (H2O2). DA can inhibit the oxidation of TMB, which causes blue solutions to fade and become colorless. According to this phenomenon, the developed colorimetric sensor can qualitatively and quantitatively analyze DA ranging from 0 to 300 μM with a detection limit of 0.09 μM. In addition, the high recovery and low relative standard deviation for practical DA determination suggested that this colorimetric sensor has potential for application in biological biosensing and diagnostic fields.

CsPbBr3 and CsPbBr3/SiO2 Nanocrystals as a Fluorescence Sensing Platform for High-Throughput Identification of Multiple Thiophene Sulfides

Air pollution is a serious problem. Refractory thiophene sulfides, which cause air pollution, bring great challenges to their rapid and accurate identification. In this work, we propose a fluorescent sensor array based on two perovskite nanocrystals (CsPbBr₃ NCs and CsPbBr₃/SiO₂ NCs) to distinguish different thiophene sulfides. The hydrogen bonding force between the thiophenics of thiophene sulfides and the amino groups of the perovskite NCs results in the weakening of the fluorescence signals of the perovskite NCs. The diverse interactions between thiophene sulfides and two perovskite NCs provide rich information, which can be obtained on the sensor array and identified by linear discriminant analysis. Five thiophene sulfides (i.e., benzothiophene, dibenzothiophene, 2-methylbenzothiophene, 3-methylthiophene, and thiophene) were discriminated by the sensor array at concentrations of 10-50 ppm. The effectiveness of the sensor array was further verified in the discrimination of blinded samples, in which all 10 samples were correctly identified. In addition, it is gratifying that even binary mixtures of thiophene sulfides could be distinguished by the proposed sensor array.

Two-Dimensional Cobalt-Doped Ti3C2 MXene Nanozyme-Mediated Homogeneous Electrochemical Strategy for Pesticides Assay Based on In Situ Generation of Electroactive Substances

Common homogeneous electrochemical (HEC) sensors usually suffer from the drawbacks of high background signal, low signal-to-noise ratio, and even false positive results due to the preaddition of electroactive substances. Thus, it is necessary to develop novel HEC sensors based on in situ generation of electroactive substances to overcome these shortcomings, which, however, is underexplored. In this work, two-dimensional (2D) nanozymes, i.e., cobalt-doped 2D Ti₃C₂ MXene nanosheets (CMNSs), with excellent peroxidase-like properties were utilized to develop HEC sensors based on the in situ generation of electroactive substances for organophosphate pesticides (OPs) detection. The 2D CMNSs were synthesized via a template-directed wet chemical approach and displayed outstanding features of hydrophilia and water dispersibility, which could catalyze the oxidation of o-phenylenediamine (OPD) to generate significantly increased reduction current. Interestingly, the 2D CMNSs with peroxidase-like properties exhibited a unique response to thiol compounds and were thus employed as highly efficient catalysts to develop HEC sensors for OPs based on the hydrolysis of acetylthiocholine (ATCh) to form thiocholine catalyzed by acetylcholinesterase (AChE) and the inhibition of AChE activity by OPs. The recovery for OPs analysis of pakchoi extract solutions ranged from 97.4% to 103.3%. The as-proposed HEC sensor based on in situ generation of electroactive substances will provide a new way for the development of high-performance electrochemical sensors and demonstrate potential applicability for the determination of pesticide residues in real samples.

L-Cysteine functionalized graphene oxide nanoarchitectonics: A metal-free Hg2+ nanosensor with peroxidase-like activity boosted by competitive adsorption

Developing non-noble metal, even metal-free chemical sensors for the detection of toxic heavy metal ions is significantly desirable for economically and environmentally sustainable application but has heretofore remained elusive. Herein, a _L-cysteine functionalized graphene oxide nanosheet (CGO) nanoarchitectonics, greenly synthesized by a very simple method at room temperature, was utilized to realize the simultaneous enrichment and colorimetric detection of trace mercury ions (Hg²⁺). It was discovered that CGO, as a nanozyme mimic exhibited greatly enhanced peroxidase-like catalytic activity than the pristine graphene oxide. By exploring the interactions of CGO nanozyme with colorimetric substrate, 3,3',5,5'-tetramethylbenzidine (TMB) and target Hg²⁺ ions, we found that the sensing principle was based mainly on the competitive adsorption between Hg²⁺ ions and TMB over CGO. The pre-capture of Hg²⁺ ions hindered the TMB binding on CGO, resulting in the promoted oxidation of TMB by H₂O₂ to produce more colored oxidation products, from which the colorimetric sensing of Hg²⁺ was realized with a good detection effect on 5 μg L^-1 solution. As an enrichment-sensing integration platform, this metal-free sensor is cost-effective and sensitive, and presents considerable anti-interference ability over other metal ions. Overall, this work not only expands the application of graphene-based materials in colorimetric detection but also provides a general sensing principle to construct highly sensitive sensors.

Carbon-Based Nanomaterials for Sustainable Agriculture: Their Application as Light Converters, Nanosensors, and Delivery Tools

Nano-enabled agriculture is now receiving increasing attentions. Among the used nanomaterials, carbon-based nanomaterials are good candidates for sustainable agriculture. Previous review papers about the role of carbon-based nanomaterials in agriculture are either focused on one type of carbon-based nanomaterial or lack systematic discussion of the potential wide applications in agriculture. In this review, different types of carbon-based nanomaterials and their applications in light converters, nanosensors, and delivery tools in agriculture are summarized. Possible knowledge gaps are discussed. Overall, this review helps to better understand the role and the potential of carbon-based nanomaterials for nano-enabled agriculture.

Green synthesis of kudzu vine biochar decorated graphene-like MoSe2 with the oxidase-like activity as intelligent nanozyme sensing platform for hesperetin

It is an urgent need to exploit a potentially green, cost efficient and eco-friendly strategy for the utilization of waste kudzu vine. We developed a one-step green preparation of kudzu vine biochar (BC) decorated graphene-like molybdenum selenide (MoSe₂) with the oxidase-like activity as intelligent nanozyme sensing platform for voltametric detection of hesperetin (HP) in orange peel using the in-situ hydrothermal synthesis method. The structure and properties of MoSe₂-BC was characterized, and found that BC significantly improved electrochemical cycle stability, electronic conductivity, electrochemical active area, and electrocatalytic activity of MoSe₂. The oxidase-like activity of MoSe₂-BC was confirmed by the oxidization of the colorless substrate 3,3',5,5'-tetramethylbenzidine (TMB) to form blue products and the change of absorbance intensity of UV-vis absorption spectra. The MoSe₂-BC exhibited excellent electrochemical sensing performance for the detection of HP in wide linear ranges from 10 nM to 9.5 μM with a low limit of detection of 2 nM using differential pulse voltammetric method. An emerging machine learning technique is used to realize the intelligent sensing of HP, and the performance evaluation of regression analysis was selected to evaluate this technique. This work will provide a guidance for the preparation and application of biochar decorated graphene-like nanomaterials with the oxidase-like activity and the development of intelligent nanozyme sensing platform.

A Methodical Review on the Applications and Potentialities of Using Nanobiosensors for Disease Diagnosis

Presently, with the introduction of nanotechnology, the evolutions and applications of biosensors and/or nanobiosensors are becoming prevalent in various scientific domains such as environmental and agricultural sciences as well as biomedical, clinical, and healthcare sciences. Trends in these aspects have led to the discovery of various biosensors/nanobiosensors with their tremendous benefits to mankind. The characteristics of the various biosensors/nanobiosensors are primarily based on the nature of nanomaterials/nanoparticles employed in the sensing mechanisms. In the last few years, the identification, as well as the detection of biological markers linked with any form of diseases (communicable or noncommunicable), has been accomplished by several sensing procedures using nanotechnology vis-à-vis biosensors/nanobiosensors. Hence, this study employs a systematic approach in reviewing some contemporary developed exceedingly sensitive nanobiosensors alongside their biomedical, clinical, or/and healthcare applications as well as their potentialities, specifically for the detection of some deadly diseases drawn from some of the recent publications. Ways forward in the form of future trends that will advance creative innovations of the potentialities of nanobiosensors for biomedical, clinical, or/and healthcare applications particularly for disease diagnosis are also highlighted.

Nitrogen-Enriched Conjugated Polymer Enabled Metal-Free Carbon Nanozymes with Efficient Oxidase-Like Activity

Metal-free carbon nanozymes could be promising with the unique features of intrinsic catalytic ability, structure diversity, and strong tolerance to acidic/alkaline media. However, to date, the study of metal-free carbon nanozymes fell far behind metal-based nanomaterials, in which, the majority reported much more peroxidase-like activity than other enzyme-mimicking behavior (e.g., oxidase). Thus, the exploit of high-performance carbon nanozymes is of importance but challenging. In this work, the nitrogen-rich conjugated polymer (Aza-CPs) with rigid network structure is utilized as precursor to yield N-doped carbon material QAU-Z1 in high yield via a direct pyrolysis method. Surprisingly, QAU-Z1 stood out in oxidase-like behavior, which significantly outperformed the control materials GNC-900 and QAU-Z2 with nucleobase or conjugated small molecule as precursor, respectively. More importantly, it is a crucial revelation that the catalytic performance is closely related to the change of zeta potential for carbon nanozyme during the substrate 3,3',5,5'-tetramethylbenzidine oxidation process, as well as its catalytical capacity to O₂ , which could be insightful to understand the inherent mechanism. This work not only presents the potential of conjugated polymers in constructing highly efficient carbon nanozyme, but also reveals the vital role of interaction mode between the nanozyme and substrate in the catalytic performance.

The recent development of nanozymes for food quality and safety detection

As potential mimics of natural enzymes, nanozymes overcome many disadvantages of natural enzymes such as complex preparation and purification process, high price, poor stability and low recycling efficiency. Combined with...

Nickel oxide@nickel-graphene quantum dot self-healing hydrogel for colorimetric detection and removal of lambda-cyhalothrin in kumquat

Detection and removal of pesticide residues in fruit and vegetable are important to ensure human health, but the current methods face challenges in sensitivity, specificity and convenience of use. The...

A highly selective and sensitive CdS fluorescent quantum dot for the simultaneous detection of multiple pesticides

We presented one-pot prepared CdS fluorescent quantum dots (QDs) which can sensitively and selectively detect three different organic pesticides.

Detection and discrimination of sulfur dioxide using a colorimetric sensor array

Discrimination and detection of sulfur dioxide residues in foods using a simple colorimetric array have been achieved. The difference maps before and after the reaction showed that the specific color fingerprint was related to the amount of sulfur dioxide. The results of principal component analysis (PCA), hierarchical clustering analysis (HCA) and linear discriminant analysis (LDA) demonstrated that the as-fabricated colorimetric sensor array have good performance for the discrimination of sulfur dioxide and other interferents, as well as different concentrations of sulfur dioxide. Moreover, the array has been successfully applied to determine the concentration of sulfur dioxide residues in real samples and revealed good accuracy, precision and repeatability.

In this work, a colorimetric sensor array based on six specific color reactions was developed and used for the determination of sulfur dioxide content. The qualitative and quantitative analysis of sulfur dioxide residues in real samples was achieved.

Iridium Single-Atomic Site Catalysts with Superior Oxygen Reduction Reaction Activity for Sensitive Monitoring of Organophosphorus Pesticides

Tremendous efforts have been made in developing single-atomic site catalysts (SASCs) for oxygen reduction reaction (ORR), which is regarded as a pivotal cornerstone in electrochemical energy conversion. However, SASCs for ORR have not been explored for electrochemical sensing. Herein, a template-sacrificed strategy is reported for the synthesis of atomically dispersed Ir SASCs, serving as a sensing platform to detect organophosphorus pesticides (OPs) with high sensitivity and selectivity. Owing to abundant Ir single-atom active sites, Ir SASCs show excellent ORR activity and stability in a neutral medium. It is found that the ORR activity of Ir SASCs can be inhibited by thiocholine, which is the hydrolysate of acetylthiocholine. After being integrated with acetylcholinesterase (AChE), the AChE-Ir SASC-based electrochemical sensor is established and shows a superior sensitivity, which shows a wide detection range of 0.5-500 ng mL^-1 with a low detection limit of 0.17 ng mL^-1 for OPs. This work exhibits a broad application prospect of ORR for sensitive detection of biomolecules.

Ultrathin Ruthenium Nanosheets with Crystallinity-Modulated Peroxidase-like Activity for Protein Discrimination

Noble-metal-based nanozymes have attracted great interest as enzyme mimics because of their unique properties. To modulate the performance and meet the requirements of practical biosensing applications, phase engineering is promising for the design of novel noble-metal-based nanomaterials. Herein, a simple salt-assist strategy was employed for the synthesis of Ru nanosheets (NSs) with the controlled crystalline degree. The crystalline degree plays a significant role in tuning peroxidase-like activity by optimizing the affinity toward the catalytic substrate. Furthermore, the inhibition effect of mercapto molecules on the peroxidase-like activity of Ru NSs was investigated. As a proof-of-concept, the Ru NSs-based colorimetric sensing arrays were developed to distinguish mercapto molecules, and five model molecules were well classified according to the different inhibition effects. Given the complexity of practical conditions, the sensing array was further applied to discriminate proteins possessing rich mercapto groups. This work not only provides an effective strategy for the design of highly active nanozymes but also achieves promising sensing arrays for practical needs.

FeMoO4 nanospheres-based nanozymatic colorimetry for rapid and sensitive pyrophosphate detection

Assays of pyrophosphate ion (PPi) are of remarkable biochemical significance due to their vital roles in the bioenergetic and metabolic processes or as disease indicators. Colorimetry is popular in the field of biosensing and detection because of its simplicity, speed and cost-effectiveness, but there is a lack of a suitable colorimetric probe. Herein, a novel colorimetric sensing platform has been established for the detection of pyrophosphate based on the FeMoO₄-H₂O₂-3,3',5,5'-tetra-methylbenzidine (TMB) system. Compared with most previously reported iron-based nanozymes, the as-obtained FeMoO₄ nanospheres with a rough surface possessed a much superior peroxidase-like catalytic activity (V_max = 28.47 × 10^-8 M s^-1) and substrate affinity (K_m = 0.174 mM) toward H₂O₂ catalysis. Due to the Fe(II) and PPi reaction, the presence of PPi could specifically restore blue oxidized TMB to colorless TMB, which led to a decrease in UV absorption at 652 nm. The absorbance change is proportional to the PPi concentration, with a linear detection range (from 0.5 to 25 μM) and a low detection limit of 0.3 μM (S/N = 3). Accordingly, its excellent selectivity and high sensitivity made it a potential colorimetric sensor for PPi analysis in actual water samples.

Portable electrochemical biosensor based on laser-induced graphene and MnO2 switch-bridged DNA signal amplification for sensitive detection of pesticide

Developing portable, quantitative, and user-friendly analytical tools for sensitive pesticide assay is of significant importance for guaranteeing food safety. Herein, a novel electrochemical biosensor was constructed by integrating laser-induced graphene (LIG) electrode on polyimide (PI) foil and MnO₂ nanosheets loaded on the paper for point-of-care test (POCT) of organophosphorus (OPs) residues. The principle of this biosensor relied on acetylcholinesterase (AChE)-catalyzed hydrolytic product-triggered disintegration of MnO₂ nanosheets for releasing assistant DNA to initiate nicking enzyme-aided recycling amplification. In the presence of OPs, the activity of AChE was inhibited and could not initiate the cleavage of the electroactive molecules-labeled hairpin probe on the electrode, resulting in the maintenance of the electrochemical response to realize a "sign-on" determination of OPs. The proposed biosensor exhibited satisfactory analytical performance for OPs assay with a linear range from 3 to 4000 ng/mL and a limit of detection down to 1.2 ng/mL. Moreover, the biosensor was useful for evaluating the residual level of pesticides in the vegetables. Therefore, this novel biosensor holds great promise for OPs assay and opens a new avenue on the development of higher-performance POCT device for sensing applications in the environment and food safety fields.

A peroxidase-like activity-based colorimetric sensor array of noble metal nanozymes to discriminate heavy metal ions

Heavy metal ions (HMIs), including Cu²⁺, Ag⁺, Cd²⁺, Hg²⁺, and Pb²⁺ from the environment pose a threat to human beings and can cause a series of life-threatening diseases. Therefore, colorimetric sensors with convenience and flexibility for HMI discrimination are still required. To provide a solution, a peroxidase-like activity-based colorimetric sensor array of citrate-capped noble metal nanozymes (osmium, platinum, and gold) has been fabricated. Some studies reported that some HMIs could interact with the noble metal nanozymes leading to a change in their peroxidase-like activity. This phenomenon was confirmed in our work. Based on this principle, different concentrations of HMIs (Cu²⁺, Ag⁺, Cd²⁺, Hg²⁺, and Pb²⁺) were discriminated. Moreover, their practical application has been tested by discriminating HMIs in tap water and SiYu lake water. What is more, as an example of the validity of our method to quantify HMIs at nanomolar concentrations, the LOD of Hg²⁺ was presented. To sum up, our study not only demonstrates the differentiation ability of this nanozyme sensor array but also gives hints for using nanozyme sensor arrays for further applications.

Highly selective and sensitive fluorescence detection of tetracyclines based on novel tungsten oxide quantum dots

Tetracyclines (TCs) residues in animal products have attracted extensive concern due to their potential toxic to human health. Accordingly, it is urgent to develop an efficient method to determine TCs for providing consumers with risk pre-warning. Herein, a novel tungsten oxide quantum dots (W_xO_y QDs) fluorescence probe for tetracycline (TET) detection was constructed through ethanol-thermal method, which exhibited intense blue fluorescence under 365 nm UV light. Interestingly, blue-emitting W_xO_y QDs could be quenched obviously after the addition of TET, which may be attributed to the synergism of inner filter effect (IFE), fluorescence resonance energy transfer (FRET) and photo-induced electron transfer (PET). Thereby, the fluorescence method was established for TET detection based on W_xO_y QDs. Additionally, the presented method was demonstrated by monitoring TET in milk and milk powder with satisfactory recoveries. More importantly, this work offered good demonstration for the detection of food hazard factors.

Dual-mode immunoassay for diethylstilbestrol based on peroxidase activity and photothermal effect of black phosphorus-gold nanoparticle nanohybrids

Nanozyme-mediated 3,3',5,5'-tetramethylbenzidine (TMB) - H₂O₂ systems have spawned the establishment of multiple colorimetric sensing platforms that are effective but sometimes subject to low sensitivity. Taking temperature as the output signal, photothermal effects lead to new strategies for sensitive detection. In this paper, a colorimetric and photothermal dual-mode immunoassay for diethylstilbestrol (DES) was constructed. It is based on the oxidation reaction of TMB catalyzed by black phosphorus-gold nanoparticle (BP/Au) nanohybrids, and the kinetics as well as catalytic mechanism of the nanohybrids were investigated in detail for the first time. Herein, the nanohybrids playcatalytic and photothermal dual roles. Moreover, the one-electron oxidation product of TMB (oxidized TMB) not only acts as chromogenic agent but also an excellent NIR laser-driven photothermal agent. The temperature (ΔT/°C) was gauged by a portable digital thermometer. Through an indirect competition strategy, a simple, sensitive, and economic immunosensor was proposed. Higher DES content in the sample correlated with less BP/Au nanohybrids conjugated to the surface of ELISA microplate, a weaker color change, and a lower temperature variation when exposed to laser irradiation. This method was applied for DES determination in real samples with gratifying recovery rates, showing great promise in food safety inspection applications.

Nanobiotechnological advancements in agriculture and food industry: Applications, nanotoxicity, and future perspectives

The high demand for sufficient and safe food, and continuous damage of environment by conventional agriculture are major challenges facing the globe. The necessity of smart alternatives and more sustainable practices in food production is crucial to confront the steady increase in human population and careless depletion of global resources. Nanotechnology implementation in agriculture offers smart delivery systems of nutrients, pesticides, and genetic materials for enhanced soil fertility and protection, along with improved traits for better stress tolerance. Additionally, nano-based sensors are the ideal approach towards precision farming for monitoring all factors that impact on agricultural productivity. Furthermore, nanotechnology can play a significant role in post-harvest food processing and packaging to reduce food contamination and wastage. In this review, nanotechnology applications in the agriculture and food sector are reviewed. Implementations of nanotechnology in agriculture have included nano- remediation of wastewater for land irrigation, nanofertilizers, nanopesticides, and nanosensors, while the beneficial effects of nanomaterials (NMs) in promoting genetic traits, germination, and stress tolerance of plants are discussed. Furthermore, the article highlights the efficiency of nanoparticles (NPs) and nanozymes in food processing and packaging. To this end, the potential risks and impacts of NMs on soil, plants, and human tissues and organs are emphasized in order to unravel the complex bio-nano interactions. Finally, the strengths, weaknesses, opportunities, and threats of nanotechnology are evaluated and discussed to provide a broad and clear view of the nanotechnology potentials, as well as future directions for nano-based agri-food applications towards sustainability.

Screening and Discrimination of Perfluoroalkyl Substances in Aqueous Solution Using a Luminescent Metal-Organic Framework Sensor Array

The extensive production and large-scale use of perfluoroalkyl substances (PFASs) have raised their presence in aquatic environments worldwide. Thus, the facile and reliable screening of PFASs in aqueous systems is of great significance. Herein, we designed a novel fluorescent sensor array for the rapid screening and discrimination of multiple PFASs in water. The sensor array comprised three highly stable zirconium porphyrinic luminescent metal-organic frameworks (i.e., PCNs) with different topological structures. The sensing mechanism was based on the static fluorescence quenching of PCNs by PFASs upon their adsorptive interactions. The fluorescence response patterns were characteristic for each PFAS because of their different adsorption affinities toward different PCNs. Through the interpretation of response patterns by statistical methods, the proposed PCN array successfully discriminated six different kinds of PFASs, each PFAS at different concentrations and PFAS mixtures at different molar ratios. The practicability of this array was further verified by effectively discriminating PFASs in two real water samples. Remarkably, the PCN sensors exhibited a very short response time toward PFASs (within 10 s) due to the ordered pore structure allowing fast PFAS diffusion. This study not only provides a facile method for rapid PFAS screening in waters but also broadens the application of luminescent metal-organic frameworks and array techniques in sensing fields.