Single-crystal-to-single-crystal metalation of a metal-organic framework: a route toward structurally well-defined catalysts

Crystallographic characterization of the metal-organic framework Fe2(bdp)3 upon reductive cation insertion

Precisely locating extra-framework cations in anionic metal–organic framework compounds remains a long-standing, yet crucial, challenge for elucidating structure–performance relationships in functional materials. Single-crystal X-ray diffraction is one of the most powerful approaches for this task, but single crystals of frameworks often degrade when subjected to post-synthetic metalation or reduction. Here, we demonstrate the growth of sizable single crystals of the robust metal–organic framework Fe₂(bdp)₃ (bdp²⁻ = benzene-1,4-dipyrazolate) and employ single-crystal-to-single-crystal chemical reductions to access the solvated framework materials A₂Fe₂(bdp)₃·yTHF (A = Li⁺, Na⁺, K⁺). X-ray diffraction analysis of the sodium and potassium congeners reveals that the cations are located near the center of the triangular framework channels and are stabilized by weak cation–π interactions with the framework ligands. Freeze-drying with benzene enables isolation of activated single crystals of Na_0.5Fe₂(bdp)₃ and Li₂Fe₂(bdp)₃ and the first structural characterization of activated metal–organic frameworks wherein extra-framework alkali metal cations are also structurally located. Comparison of the solvated and activated sodium-containing structures reveals that the cation positions differ in the two materials, likely due to cation migration that occurs upon solvent removal to maximize stabilizing cation–π interactions. Hydrogen adsorption data indicate that these cation–framework interactions are sufficient to diminish the effective cationic charge, leading to little or no enhancement in gas uptake relative to Fe₂(bdp)₃. In contrast, Mg_0.85Fe₂(bdp)₃ exhibits enhanced H₂ affinity and capacity over the non-reduced parent material. This observation shows that increasing the charge density of the pore-residing cation serves to compensate for charge dampening effects resulting from cation–framework interactions and thereby promotes stronger cation–H₂ interactions.

Single-crystal X-ray diffraction reveals structural influences on gas adsorption properties in anionic metal–organic frameworks.

Highly Active Gas Phase Organometallic Catalysis Supported Within Metal-Organic Framework Pores

Metal-organic frameworks (MOFs) can act as a platform for the heterogenization of molecular catalysts, providing improved stability, allowing easy catalyst recovery and a route toward structural elucidation of the active catalyst. We have developed a MOF, 1, possessing vacant N,N-chelating sites which are accessible via the porous channels that penetrate the structure. In the present work, cationic rhodium(I) norbornadiene (NBD) and bis(ethylene) (ETH) complexes paired with both noncoordinating and coordinating anions have been incorporated into the N,N-chelation sites of 1 via postsynthetic metalation and facile anion exchange. Exploiting the crystallinity of the host framework, the immobilized Rh(I) complexes were structurally characterized using X-ray crystallography. Ethylene hydrogenation catalysis by 1·[Rh(NBD)]X and 1·[Rh(ETH)₂]X (X = Cl and BF₄) was studied in the gas phase (2 bar, 46 °C) to reveal that 1·[Rh(ETH)₂](BF₄) was the most active catalyst (TOF = 64 h^-1); the NBD materials and the chloride salt were notably less active. On the basis of these observations, the activity of the Rh(I) bis(ethylene) complexes, 1·[Rh(ETH)₂]BF₄ and 1·[Rh(ETH)₂]Cl, in butene isomerization was also studied using gas-phase NMR spectroscopy. Under one bar of butene at 46 °C, 1·[Rh(ETH)₂]BF₄ rapidly catalyzes the conversion of 1-butene to 2-butene with a TOF averaging 2000 h^-1 over five cycles. Notably, the chloride derivative, 1 [Rh(ETH)₂]Cl displays negligible activity in comparison. XPS analysis of the postcatalysis sample, supported by DFT calculations, suggest that the catalytic activity is inhibited by the strong interactions between a Rh(III) allyl hydride intermediate and the chloride anion.

Single-Site Cobalt-Catalyst Ligated with Pyridylimine-Functionalized Metal-Organic Frameworks for Arene and Benzylic Borylation

We report a highly active single-site heterogeneous cobalt-catalyst based on a porous and robust pyridylimine-functionalized metal-organic frameworks (pyrim-MOF) for chemoselective borylation of arene and benzylic C-H bonds. The pyrim-MOF having UiO-68 topology, constructed from zirconium-cluster secondary building units and pyridylimine-functionalized dicarboxylate bridging linkers, was metalated with CoCl₂ followed by treatment of NaEt₃BH to give the cobalt-functionalized MOF-catalyst (pyrim-MOF-Co). Pyrim-MOF-Co has a broad substrate scope, allowing the C-H borylation of halogen-, alkoxy-, alkyl-substituted arenes as well as heterocyclic ring systems using B₂pin₂ or HBpin (pin = pinacolate) as the borylating agent to afford the corresponding arene- or alkyl-boronate esters in good yields. Pyrim-MOF-Co gave a turnover number (TON) of up to 2500 and could be recycled and reused at least 9 times. Pyrim-MOF-Co was also significantly more robust and active than its homogeneous control, highlighting the beneficial effect of active-site isolation within the MOF framework that prevents intermolecular decomposition. The experimental and computational studies suggested (pyrim^•-)Co^I(THF) as the active catalytic species within the MOF, which undergoes a mechanistic pathway of oxidative addition, turnover limiting σ-bond metathesis, followed by reductive elimination to afford the boronate ester.

Dual-fixations of europium cations and TEMPO species on metal-organic frameworks for the aerobic oxidation of alcohols

The efficient and selective aerobic oxidation of alcohols has been investigated with judicious combinations of europium-incorporated and/or TEMPO ((2,2,6,6-tetramethylpiperidin-1-yl)oxyl)-functionalized zirconium-based porous metal-organic frameworks (MOFs). Although MOFs are well-known catalytic platforms for the aerobic oxidation with radical-functionalities and metal nanoparticles, these systematic approaches involving metal cations and/or radical species introduce numerous interesting aspects for cooperation between metals and TEMPO for the aerobic oxidation of alcohols. The role of TEMPO as the oxidant in the heterogeneous catalytic aerobic oxidation of alcohols was revealed through a series of comparisons between metal-anchored, TEMPO-anchored, and metal and TEMPO-anchored MOF catalysis. The fine tunability of the MOF allowed the homogeneously and doubly functionalized catalysts to undergo organic reactions in the heterogeneous media. In addition, the well-defined and carefully designed heterogeneous molecular catalysts displayed reusability along with better catalytic performance than the homogeneous systems using identical coordinating ligands. The role of metal-cation fixation should be carefully revised to control their coordination and maximize their catalytic activity. Lastly, the metal cation-fixed MOF displayed better substrate tolerance and reaction efficiencies than the TEMPO-anchored MOF or mixture MOF systems.

Fluorescence Enhancement in the Solid State by Isolating Perylene Fluorophores in Metal-Organic Frameworks

Polycyclic aromatic hydrocarbons such as perylene and pyrene and their derivatives are highly emissive fluorophores in solution. However, the practical applications of these materials in the field of molecular electronic and light-emitting devices are often hindered by self-quenching effects because of the formation of nonfluorescent aggregates in concentrated solutions or in the solid state. Herein, we demonstrate that aggregation-caused quenching of perylenes can be minimalized by molecular incorporation into metal-organic frameworks (MOFs). This study utilized a stable Zr₆ cluster-based MOF, UiO-67, as a matrix. Linear linkers containing photoresponsive moieties were designed and incorporated into the parent UiO-67 scaffold through the partial replacement of the nonfluorescent linkers of a similar length, forming mixed-linker MOFs. The average distance between perylene moieties was tuned by changing the linker ratios, thus controlling the fluorescence intensity, emission wavelength, and quantum yield. Molecular modeling was further adopted to correlate the number of isolated perylene linkers within the framework with the ratio between the two linkers, thereby rationalizing the change in the observed fluorescent properties. Taking advantage of the tunable fluorescence, inherent porosity, and high chemical stability of this MOF platform, it was applied as a fluorescent sensor for oxygen detection in the gas phase, a model reaction, showing fast response and good recyclability.

Metal-Organic Framework-Based Catalysts with Single Metal Sites

Metal-organic frameworks (MOFs) are a class of distinctive porous crystalline materials constructed by metal ions/clusters and organic linkers. Owing to their structural diversity, functional adjustability, and high surface area, different types of MOF-based single metal sites are well exploited, including coordinately unsaturated metal sites from metal nodes and metallolinkers, as well as active metal species immobilized to MOFs. Furthermore, controllable thermal transformation of MOFs can upgrade them to nanomaterials functionalized with active single-atom catalysts (SACs). These unique features of MOFs and their derivatives enable them to serve as a highly versatile platform for catalysis, which has actually been becoming a rapidly developing interdisciplinary research area. In this review, we overview the recent developments of catalysis at single metal sites in MOF-based materials with emphasis on their structures and applications for thermocatalysis, electrocatalysis, and photocatalysis. We also compare the results and summarize the major insights gained from the works in this review, providing the challenges and prospects in this emerging field.

Isolating reactive metal-based species in Metal-Organic Frameworks - viable strategies and opportunities

Structural insight into reactive species can be achieved via strategies such as matrix isolation in frozen glasses, whereby species are kinetically trapped, or by confinement within the cavities of host molecules. More recently, Metal-Organic Frameworks (MOFs) have been used as molecular scaffolds to isolate reactive metal-based species within their ordered pore networks. These studies have uncovered new reactivity, allowed observation of novel metal-based complexes and clusters, and elucidated the nature of metal-centred reactions responsible for catalysis. This perspective considers strategies by which metal species can be introduced into MOFs and highlights some of the advantages and limitations of each approach. Furthermore, the growing body of work whereby reactive species can be isolated and structurally characterised within a MOF matrix will be reviewed, including discussion of salient examples and the provision of useful guidelines for the design of new systems. Novel approaches that facilitate detailed structural analysis of reactive chemical moieties are of considerable interest as the knowledge garnered underpins our understanding of reactivity and thus guides the synthesis of materials with unprecedented functionality.

Solid-State Molecular Organometallic Catalysis in Gas/Solid Flow (Flow-SMOM) as Demonstrated by Efficient Room Temperature and Pressure 1-Butene Isomerization

The use of solid–state molecular organometallic chemistry (SMOM–chem) to promote the efficient double bond isomerization of 1-butene to 2-butenes under flow–reactor conditions is reported. Single crystalline catalysts based upon the σ-alkane complexes [Rh(R₂PCH₂CH₂PR₂)(η²η²-NBA)][BAr^F₄] (R = Cy, ^tBu; NBA = norbornane; Ar^F = 3,5-(CF₃)₂C₆H₃) are prepared by hydrogenation of a norbornadiene precursor. For the ^tBu-substituted system this results in the loss of long-range order, which can be re-established by addition of 1-butene to the material to form a mixture of [Rh(^tBu₂PCH₂CH₂P^tBu₂)(cis-2-butene)][BAr^F₄] and [Rh(^tBu₂PCH₂CH₂P^tBu₂)(1-butene)][BAr^F₄], in an order/disorder/order phase change. Deployment under flow-reactor conditions results in very different on-stream stabilities. With R = Cy rapid deactivation (3 h) to the butadiene complex occurs, [Rh(Cy₂PCH₂CH₂PCy₂)(butadiene)][BAr^F₄], which can be reactivated by simple addition of H₂. While the equivalent butadiene complex does not form with R = ^tBu at 298 K and on-stream conversion is retained up to 90 h, deactivation is suggested to occur via loss of crystallinity of the SMOM catalyst. Both systems operate under the industrially relevant conditions of an isobutene co-feed. cis:trans selectivites for 2-butene are biased in favor of cis for the ^tBu system and are more leveled for Cy.

Recent highlights and future prospects on mixed-metal MOFs as emerging supercapacitor candidates

Mixed-metal metal-organic frameworks (M-MOFs) consist of at least two different metal ions as nodes in the same framework. The incorporation of a second or more metal ions provides structural/compositional diversity, multi-functionality and stability to the framework. Moreover, the periodical array of different metal ions in the framework may alter the physical/chemical properties of M-MOFs and result in fascinating applications. M-MOFs with exciting structural features offer superior supercapacitor performances compared to single metal MOFs due to the synergic effect of different metal ions. In this review, we summarize several synthetic methods to construct M-MOFs by employing various organic ligands or metalloligands. Further, we discuss the electrochemical performance of several M-MOFs and their derived composite materials for supercapacitor applications.

Metal–organic frameworks as acid- and/or base-functionalized catalysts for tandem reactions

In this article, we have reviewed the development of MOFs anchored with acidic and/or basic sites as heterogeneous catalysts for tandem/cascade (domino) reactions over the past five years.

Diversity-Oriented Metal Decoration on UiO-Type Metal-Organic Frameworks: an Efficient Approach to Increase CO2 Uptake and Catalytic Conversion to Cyclic Carbonates

A library of metallo-bipyridine UiO-type metal-organic frameworks (MOFs) has been successfully synthesized by postmetallation of a wide range of metal complexes into bidentate bipyridine moieties. Then, a systematic investigation is devoted to a catalytic evaluation of the resultant MOFs containing a binary Lewis acid function for the synthesis of cyclic carbonates from epoxides and carbon dioxide (CO2). The result indicated that the metal-grafted MOFs exhibit improvement in terms of CO2 uptake capacity and catalytic activity in comparison with their nonmetallated counterparts. The comprehensive investigation provides a valuable insight into the synergetic effects of MOF functionalities including metal node, grafted metal, and its counterion in the cycloaddition reaction. Furthermore, the metal coordination modulation due to its benefits such as being a solvent-free process, nearly full conversion to cyclic carbonates, high selectivity and high CO2 uptake, applying atmospheric CO2 pressure, and excellent stability and easy recyclability of the catalyst demonstrates them as promising candidates for practical utilization of CO2 conversion into value-added chemicals.

Confinement of atomically defined metal halide sheets in a metal-organic framework

The size-dependent and shape-dependent characteristics that distinguish nanoscale materials from bulk solids arise from constraining the dimensionality of an inorganic structure^1-3. As a consequence, many studies have focused on rationally shaping these materials to influence and enhance their optical, electronic, magnetic and catalytic properties^4-6. Although a select number of stable clusters can typically be synthesized within the nanoscale regime for a specific composition, isolating clusters of a predetermined size and shape remains a challenge, especially for those derived from two-dimensional materials. Here we realize a multidentate coordination environment in a metal-organic framework to stabilize discrete inorganic clusters within a porous crystalline support. We show confined growth of atomically defined nickel(II) bromide, nickel(II) chloride, cobalt(II) chloride and iron(II) chloride sheets through the peripheral coordination of six chelating bipyridine linkers. Notably, confinement within the framework defines the structure and composition of these sheets and facilitates their precise characterization by crystallography. Each metal(II) halide sheet represents a fragment excised from a single layer of the bulk solid structure, and structures obtained at different precursor loadings enable observation of successive stages of sheet assembly. Finally, the isolated sheets exhibit magnetic behaviours distinct from those of the bulk metal halides, including the isolation of ferromagnetically coupled large-spin ground states through the elimination of long-range, interlayer magnetic ordering. Overall, these results demonstrate that the pore environment of a metal-organic framework can be designed to afford precise control over the size, structure and spatial arrangement of inorganic clusters.

Mixed-Metal MOFs: Unique Opportunities in Metal-Organic Framework (MOF) Functionality and Design

Mixed-metal metal-organic frameworks (MM-MOFs) can be considered to be those MOFs having two different metals anywhere in the structure. Herein we summarize the various strategies for the preparation of MM-MOFs and some of their applications in adsorption, gas separation, and catalysis. It is shown that compared to homometallic MOFs, MM-MOFs bring about the opportunity to take advantage of the complexity and the synergism derived from the presence of different metal ions in the structure of MOFs. This is reflected in a superior performance and even stability of MM-MOFs respect to related single-metal MOFs. Emphasis is made on the use of MM-MOFs as catalysts for tandem reactions.

A concentrated array of copper porphyrin candidate qubits

Synthetic chemistry offers a pathway to realize atomically precise arrays of qubits, the smallest unit of a quantum information science system. We harnessed framework chemistry to create an array of qubit candidates, featuring one qubit every 13.6 Å, by synthesizing the new copper(ii) variant of the porphyrinic metal-organic framework PCN-224. We subjected the framework to pulse-electron paramagnetic resonance (EPR) measurements, establishing spin coherence at temperatures up to 80 K within a fully spin concentrated framework. Observation of Rabi oscillations further support the viability of the qubits within these arrays. To interrogate the spin dynamics of qubit arrays, we investigated spin-lattice relaxation, T 1, through a combination of pulse-EPR and alternating current (ac) magnetic susceptibility measurements. These data revealed distinct vibrational environments within the frameworks that contribute to spin dynamics. The aggregate results establish a pathway for a synthetic approach to create spatially precise networks of qubits.

Tuning Pt and Cu sites population inside functionalized UiO-67 MOF by controlling activation conditions

The exceptional thermal and chemical stability of the UiO-66, -67 and -68 classes of isostructural MOFs [J. Am. Chem. Soc., 2008, 130, 13850] makes them ideal materials for functionalization purposes aimed at introducing active centres for potential application in heterogeneous catalysis. We previously demonstrated that a small fraction (up to 10%) of the linkers in the UiO-67 MOF can be replaced by bipyridine-dicarboxylate (bpydc) moieties exhibiting metal-chelating ability and enabling the grafting of Pt(ii) and Pt(iv) ions in the MOF framework [Chem. Mater., 2015, 27, 1042] upon interaction with PtCl₂ or PtCl₄ precursors. Herein we extend this functionalization approach in two directions. First, we show that by controlling the activation of the UiO-67-Pt we can move from a material hosting isolated Pt(ii) sites anchored to the MOF framework with Pt(ii) exhibiting two coordination vacancies (potentially interesting for C-H bond activation) to the formation of very small Pt nanoparticles hosted inside the MOF cavities (potentially interesting for hydrogenation reactions). The second direction consists of the extension of the approach to the insertion of Cu(ii), obtained via interaction with CuCl₂, and exhibiting interesting redox properties. All materials have been characterized by in situ X-ray absorption spectroscopy at the Pt L₃- and Cu K-edges.

From fundamentals to applications: a toolbox for robust and multifunctional MOF materials

In recent years, metal-organic frameworks (MOFs) have been regarded as one of the most important classes of materials. The combination of various metal clusters and ligands, arranged in a vast array of geometries has led to an ever-expanding MOF family. Each year, new and novel MOF structures are discovered. The structural diversity present in MOFs has significantly expanded the application of these new materials. MOFs show great potential for a variety of applications, including but not limited to: gas storage and separation, catalysis, biomedicine delivery, and chemical sensing. This review intends to offer a short summary of some of the most important topics and recent development in MOFs. The scope of this review shall cover the fundamental aspects concerning the design and synthesis of MOFs and range to the practical applications regarding their stability and derivative structures. Emerging trends of MOF development will also be discussed. These trends shall include multicomponent MOFs, defect development in MOFs, and MOF composites. The ever important structure-property-application relationship for MOFs will also be investigated. Overall, this review provides insight into both existing structures and emerging aspects of MOFs.

Stable Metal-Organic Frameworks: Design, Synthesis, and Applications

Metal-organic frameworks (MOFs) are an emerging class of porous materials with potential applications in gas storage, separations, catalysis, and chemical sensing. Despite numerous advantages, applications of many MOFs are ultimately limited by their stability under harsh conditions. Herein, the recent advances in the field of stable MOFs, covering the fundamental mechanisms of MOF stability, design, and synthesis of stable MOF architectures, and their latest applications are reviewed. First, key factors that affect MOF stability under certain chemical environments are introduced to guide the design of robust structures. This is followed by a short review of synthetic strategies of stable MOFs including modulated synthesis and postsynthetic modifications. Based on the fundamentals of MOF stability, stable MOFs are classified into two categories: high-valency metal-carboxylate frameworks and low-valency metal-azolate frameworks. Along this line, some representative stable MOFs are introduced, their structures are described, and their properties are briefly discussed. The expanded applications of stable MOFs in Lewis/Brønsted acid catalysis, redox catalysis, photocatalysis, electrocatalysis, gas storage, and sensing are highlighted. Overall, this review is expected to guide the design of stable MOFs by providing insights into existing structures, which could lead to the discovery and development of more advanced functional materials.

New Metal-Organic Frameworks for Chemical Fixation of CO2

A novel series of two zirconium- and one indium-based metal-organic frameworks (MOFs), namely, MOF-892, MOF-893, and MOF-894, constructed from the hexatopic linker, 1',2',3',4',5',6'-hexakis(4-carboxyphenyl)benzene, were synthesized and fully characterized. MOF-892 and MOF-893 are two new exemplars of materials with topologies previously unseen in the important family of zirconium MOFs. MOF-892, MOF-893, and MOF-894 exhibit efficient heterogeneous catalytic activity for the cycloaddition of CO₂, resulting in a cyclic organic carbonate formation with high conversion, selectivity, and yield under mild conditions (1 atm CO₂, 80 °C, and solvent-free). Because of the structural features provided by their building units, MOF-892 and MOF-893 are replete with accessible Lewis and Brønsted acid sites located at the metal clusters and the non-coordinating carboxylic groups of the linkers, respectively, which is found to promote the catalytic CO₂ cycloaddition reaction. As a proof-of-concept, MOF-892 exhibits high catalytic activity in the one-pot synthesis of styrene carbonate from styrene and CO₂ without preliminary synthesis and isolation of styrene oxide.

Influence of nanoscale structuralisation on the catalytic performance of ZIF-8: a cautionary surface catalysis study

Nanoscale structuralisation is demonstrated to influence the stability and catalytic properties of zeolitic imidazolate framework-8.

Acidic ionic liquid based UiO-67 type MOFs: a stable and efficient heterogeneous catalyst for esterification

Acidic ionic liquid groups were introduced into the frameworks successfully and the resulting materials showed excellent activity.

Highly active, separable and recyclable bipyridine iridium catalysts for C–H borylation reactions

Iridium complexes generated from Ir(i) precursors and PIB oligomer functionalized bpy ligands efficiently catalyzed the reaction of arenes with bis(pinacolato)diboron under mild conditions to produce a variety of arylboronate compounds.

Recent status on MOF thin films on transparent conductive oxides substrates (ITO or FTO)

MOF thin films on a conductive support are reviewed with a particular focus on the growth control and the binding strength of the films.

Breathing 3D Frameworks with T-Shaped Connecting Ligand Exhibiting Solvent Induction, Metal Ions Effect and Luminescent Properties

To study the structural effects in three-dimensional porous coordination polymers, three novel flexible porous coordination polymers—[Cd2(bpdc)2](DMF)3(H2O) (1) and [M(bpdc)](DMF)(H2O) (M = Cd (2), Zn (3))—have been synthesized under solvothermal conditions with d10 block metal ions and T-shaped connecting ligand. Complexes 1–3 crystallize in different space groups, but they display the same ant network. The first two complexes can transform into each other via the alteration of guest, whereas complex 3 shows no structural change. The structural details reveal that the size of metal ions might be responsible for the transformation of porous frameworks. Furthermore, luminescent properties have been explored, and a guest-dependent shift of emission peaks was observed, suggesting potential application of the complexes as a probe.

Solid-state molecular organometallic chemistry. Single-crystal to single-crystal reactivity and catalysis with light hydrocarbon substrates

Solid-state molecular organometallic catalysis (SMOM-cat): synthetic routes, unique structural motifs, mobility in the solid-state and very active gas/solid isomerization catalysts.

Single-crystal to single-crystal solid/gas reactivity and catalysis starting from the precursor sigma-alkane complex [Rh(Cy₂PCH₂CH₂PCy₂)(η²η²-NBA)][BAr^F₄] (NBA = norbornane; Ar^F = 3,5-(CF₃)₂C₆H₃) is reported. By adding ethene, propene and 1-butene to this precursor in solid/gas reactions the resulting alkene complexes [Rh(Cy₂PCH₂CH₂PCy₂)(alkene)_x][BAr^F₄] are formed. The ethene (x = 2) complex, [Rh(Cy₂PCH₂CH₂PCy₂)(ethene)₂][BAr^F₄]-Oct, has been characterized in the solid-state (single-crystal X-ray diffraction) and by solution and solid-state NMR spectroscopy. Rapid, low temperature recrystallization using solution methods results in a different crystalline modification, [Rh(Cy₂PCH₂CH₂PCy₂)(ethene)₂][BAr^F₄]-Hex, that has a hexagonal microporous structure (P6₃22). The propene complex (x = 1) [Rh(Cy₂PCH₂CH₂PCy₂)(propene)][BAr^F₄] is characterized as having a π-bound alkene with a supporting γ-agostic Rh···H₃C interaction at low temperature by single-crystal X-ray diffraction, variable temperature solution and solid-state NMR spectroscopy, as well as periodic density functional theory (DFT) calculations. A fluxional process occurs in both the solid-state and solution that is proposed to proceed via a tautomeric allyl-hydride. Gas/solid catalytic isomerization of d₃-propene, H₂C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> CHCD₃, using [Rh(Cy₂PCH₂CH₂PCy₂)(η²η²-NBA)][BAr^F₄] scrambles the D-label into all possible positions of the propene, as shown by isotopic perturbation of equilibrium measurements for the agostic interaction. Periodic DFT calculations show a low barrier to H/D exchange (10.9 kcal mol^–1, PBE-D3 level), and GIPAW chemical shift calculations guide the assignment of the experimental data. When synthesized using solution routes a bis-propene complex, [Rh(Cy₂PCH₂CH₂PCy₂)(propene)₂][BAr^F₄], is formed. [Rh(Cy₂PCH₂CH₂PCy₂)(butene)][BAr^F₄] (x = 1) is characterized as having 2-butene bound as the cis-isomer and a single Rh···H₃C agostic interaction. In the solid-state two low-energy fluxional processes are proposed. The first is a simple libration of the 2-butene that exchanges the agostic interaction, and the second is a butene isomerization process that proceeds via an allyl-hydride intermediate with a low computed barrier of 14.5 kcal mol^–1. [Rh(Cy₂PCH₂CH₂PCy₂)(η²η²-NBA)][BAr^F₄] and the polymorphs of [Rh(Cy₂PCH₂CH₂PCy₂)(ethene)₂][BAr^F₄] are shown to be effective in solid-state molecular organometallic catalysis (SMOM-Cat) for the isomerization of 1-butene to a mixture of cis- and trans-2-butene at 298 K and 1 atm, and studies suggest that catalysis is likely dominated by surface-active species. [Rh(Cy₂PCH₂CH₂PCy₂)(η²η²-NBA)][BAr^F₄] is also shown to catalyze the transfer dehydrogenation of butane to 2-butene at 298 K using ethene as the sacrificial acceptor.

Structural characterization of framework-gas interactions in the metal-organic framework Co2(dobdc) by in situ single-crystal X-ray diffraction

The crystallographic characterization of framework-guest interactions in metal-organic frameworks allows the location of guest binding sites and provides meaningful information on the nature of these interactions, enabling the correlation of structure with adsorption behavior. Here, techniques developed for in situ single-crystal X-ray diffraction experiments on porous crystals have enabled the direct observation of CO, CH4, N2, O2, Ar, and P4 adsorption in Co2(dobdc) (dobdc4- = 2,5-dioxido-1,4-benzenedicarboxylate), a metal-organic framework bearing coordinatively unsaturated cobalt(ii) sites. All these molecules exhibit such weak interactions with the high-spin cobalt(ii) sites in the framework that no analogous molecular structures exist, demonstrating the utility of metal-organic frameworks as crystalline matrices for the isolation and structural determination of unstable species. Notably, the Co-CH4 and Co-Ar interactions observed in Co2(dobdc) represent, to the best of our knowledge, the first single-crystal structure determination of a metal-CH4 interaction and the first crystallographically characterized metal-Ar interaction. Analysis of low-pressure gas adsorption isotherms confirms that these gases exhibit mainly physisorptive interactions with the cobalt(ii) sites in Co2(dobdc), with differential enthalpies of adsorption as weak as -17(1) kJ mol-1 (for Ar). Moreover, the structures of Co2(dobdc)·3.8N2, Co2(dobdc)·5.9O2, and Co2(dobdc)·2.0Ar reveal the location of secondary (N2, O2, and Ar) and tertiary (O2) binding sites in Co2(dobdc), while high-pressure CO2, CO, CH4, N2, and Ar adsorption isotherms show that these binding sites become more relevant at elevated pressures.

Mapping-Out Catalytic Processes in a Metal-Organic Framework with Single-Crystal X-ray Crystallography

Single-crystal X-ray crystallography is employed to characterize the reaction species of a full catalytic carbonylation cycle within a Mn^II -based metal-organic framework (MOF) material. The structural insights explain why the Rh metalated MOF is catalytically competent toward the carbonylation of MeBr but only affords stoichiometric turn-over in the case of MeI. This work highlights the capability of MOFs to act as platform materials for studying single-site catalysis in heterogeneous systems.

Facile synthesis of an ultra-stable metal–organic framework with excellent acid and base resistance

A novel ultra-stable metal–organic framework, MCIF-1, [Cu₂(DCI)₂](MeCN), based on dicyanoimidazole and Cu(i), has been synthesized at room temperature successfully. MCIF-1 shows excellent water stability and can retain crystallinity after soaking in water for about one week. In addition, MCIF-1 also shows exceptional resistance under both acidic and basic conditions within a large pH range from 0 to 13.5. What is more, after modifying the synthesis procedure slightly, we can produce this material in a large scale during a very short time. Mild synthesis conditions, excellent stability and ease of large scale production give MCIF-1 great potential for practical use.

Organometallic chemistry using partially fluorinated benzenes

Fluorobenzenes, in particular fluorobenzene (FB) and 1,2-difluorobenzene (1,2-DiFB), are versatile solvents for conducting organometallic chemistry and transition-metal-based catalysis.

Ethylene oligomerization in metal–organic frameworks bearing nickel(ii) 2,2′-bipyridine complexes

The metal–organic frameworks Zr₆O₄(OH)₄(bpydc)₆ (1; bpydc²⁻ = 2,2′-bipyridine-5,5′-dicarboxylate) and Zr₆O₄(OH)₄(bpydc)_0.84(bpdc)_5.16 (2; bpdc²⁻ = biphenyl-4,4′-dicarboxylate) were readily metalated with Ni(DME)Br₂ (DME = dimethoxyethane) to produce the corresponding metalated frameworks 1(NiBr₂)₆ and 2(NiBr₂)_0.84. Both nickel(ii)-containing frameworks catalyze the oligomerization of ethylene in the presence of Et₂AlCl. In these systems, the pore environment around the active nickel sites significantly influences their selectivity for formation of oligomers over polymer. Specifically, the single-crystal structure of 1(NiBr₂)_5.64 reveals that surrounding metal–linker complexes enforce a steric environment on each nickel site that causes polymer formation to become favorable. Minimizing this steric congestion by isolating the nickel(ii) bipyridine complexes in the mixed-linker framework 2(NiBr₂)_0.84 markedly improves both the catalytic activity and selectivity for oligomers. Furthermore, both frameworks give product mixtures that are enriched in shorter olefins (C_4–10), leading to deviations from the expected Schulz–Flory distribution of oligomers. Although these deviations indicate possible pore confinement effects on selectivity, control experiments using the nickel-treated biphenyl framework Zr₆O₄(OH)₄(bpdc)₆(NiBr₂)_0.14 (3(NiBr₂)_0.14) reveal that they likely arise at least in part from the presence of nickel species that are not ligated by bipyridine within 1(NiBr₂)_5.64 and 2(NiBr₂)_0.84.

Sorption and photodegradation under visible light irradiation of an organic pollutant by a heterogeneous UiO-67–Ru–Ti MOF obtained by post-synthetic exchange

By exchanging metals in a photoactive MOF, it has been possible to obtain a material for the photodegradation of methylene blue.

Metalation Triggers Single Crystalline Order in a Porous Solid

We report the dramatic triggering of structural order in a Zr(IV)-based metal-organic framework (MOF) through docking of HgCl₂ guests. Although as-made crystals were unsuitable for single crystal X-ray diffraction (SCXRD), with diffraction limited to low angles well below atomic resolution due to intrinsic structural disorder, permeation of HgCl₂ not only leaves the crystals intact but also resulted in fully resolved backbone as well as thioether side groups. The crystal structure revealed elaborate HgCl₂-thioether aggregates nested within the host octahedra to form a hierarchical, multifunctional net. The chelating thioether groups also promote Hg(II) removal from water, while the trapped Hg(II) can be easily extricated by 2-mercaptoethanol to reactivate the MOF sorbent.