Electrostatic layer-by-layer nanoassembly on biological microtemplates: platelets

Nanotechnology and site-targeted drug delivery

Nanotechnology, building on its ability to control or manipulate structures at the atomic level, promises to develop effective drug-delivery systems. This is to be achieved through creating structures that have novel properties because of their small size. This is not an entirely new concept in site-targeted drug delivery, and this critical review examines recent contributions made by 'nanotechnology' to solve critical issues concerning the development of therapeutically effective and acceptable site-targeted drug delivery systems. It is shown that very little progress has been made. For nanotechnology rationally to generate materials useful in human therapy it will need to progress in full recognition of all the requirements biology places on the acceptability of exogenous materials.

Functionalization of whole-cell bacterial reporters with magnetic nanoparticle

We developed a biocompatible and highly efficient approach for functionalization of bacterial cell wall with magnetic nanoparticles (MNPs). Three Acinetobacter baylyi ADP1 chromosomally based bioreporters, which were genetically engineered to express bioluminescence in response to salicylate, toluene/xylene and alkanes, were functionalized with 18 ± 3 nm iron oxide MNPs to acquire magnetic function. The efficiency of MNPs functionalization of Acinetobacter bioreporters was 99.96 ± 0.01%. The MNPs‐functionalized bioreporters (MFBs) can be remotely controlled and collected by an external magnetic field. The MFBs were all viable and functional as good as the native cells in terms of sensitivity, specificity and quantitative response. More importantly, we demonstrated that salicylate sensing MFBs can be applied to sediments and garden soils, and semi‐quantitatively detect salicylate in those samples by discriminably recovering MFBs with a permanent magnet. The magnetically functionalized cells are especially useful to complex environments in which the indigenous cells, particles and impurities may interfere with direct measurement of bioreporter cells and conventional filtration is not applicable to distinguish and harvest bioreporters. The approach described here provides a powerful tool to remotely control and selectively manipulate MNPs‐functionalized cells in water and soils. It would have a potential in the application of environmental microbiology, such as bioremediation enhancement and environment monitoring and assessment.

A direct technique for magnetic functionalization of living human cells

Functionalized living cells are regarded as effective tools in directed cell delivery and tissue engineering. Here we report the facile functionalization of viable isolated HeLa cells with superparamagnetic cationic nanoparticles via a single-step biocompatible process. Nanoparticles are localized on the cellular membranes and do not penetrate into the cytoplasm. The magnetically responsive cells are viable and able to colonize and grow on substrates. Magnetically facilitated microorganization of functionalized cells into viable living clusters is demonstrated. We believe that the technique described here may find a number of potential applications in cell-based therapies and in development of whole-cell biosensors.

Interfacing living yeast cells with graphene oxide nanosheaths

The first example of the encapsulation of living yeast cells with multilayers of GO nanosheets via LbL self-assembly is reported. The GO nanosheets with opposite charges are alternatively coated onto the individual yeast cells while preserving the viability of the yeast cells, thus affording a means of interfacing graphene with living yeast cells. This approach is expanded by integrating other organic polymers or inorganic nanoparticles to the cells by hybridizing the entries with GO nanosheets through LbL self-assembly. It is demonstrated that incorporated iron oxide nanoparticles can deliver magnetic properties to the biological systems, allowing the integration of new physical and chemical functions for living cells with a combination of GO nanosheets.

Direct probing of micromechanical properties of hydrogen-bonded layer-by-layer microcapsule shells with different chemical compositions

The mechanical properties of hydrogen-bonded layer-by-layer (LbL) microcapsule shells constructed from tannic acid (TA) and poly(vinylpyrrolidone) (PVPON) components have been studied in both the dry and swollen states. In the dry state, the value of the elastic modulus was measured to be within 0.6-0.7 GPa, which is lower than the typical elastic modulus for electrostatically assembled LbL shells. Threefold swelling of the LbL shells in water results in a significant reduction of the elastic modulus to values well below 1 MPa, which is typical value seen for highly compliant gel materials. The increase of the molecular weight of the PVPON component from 55 to 1300 kDa promotes chain entanglements and causes a stiffening of the LbL shells with a more than 2-fold increase in elastic modulus value. Moreover, adding a polyethylenimine prime layer to the LbL shell affects the growth of hydrogen-bonded multilayers which consequently results in dramatically stiffer, thicker, and rougher LbL shells with the elastic modulus increasing by more than an order of magnitude, up to 4.3 MPa. An alternation of the elastic properties of very compliant hydrogen-bonded shells by variation of molecular weight is a characteristic feature of weakly bonded LbL shells. Such an ability to alter the elastic modulus in a wide range is critically important for the design of highly compliant microcapsules with tunable mechanical stability, loading ability, and permeability.

Layer-by-layer capsules for magnetic resonance imaging and drug delivery

Layer-by-layer (LbL) self-assembled polyelectrolyte capsules have demonstrated their unique advantages and capability in drug delivery applications. These ordered micro/nano-structures are also promising candidates as imaging contrast agents for diagnostic and theranostic applications. Magnetic resonance imaging (MRI), one of the most powerful clinical imaging modalities, is moving forward to the molecular imaging field and requires the availability of advanced imaging probes. In this review, we are focusing on the design of MRI visible LbL capsules, which incorporate either paramagnetic metal-ligand complexes or superparamagnetic iron oxide (SPIO) nanoparticles. The design criteria cover the topics of probe sensitivity, biosafety, long-circulation property, targeting ligand decoration, and drug loading strategies. Examples of MRI visible LbL capsules with paramagnetic or superparamagnetic moieties were given and discussed. This carrier platform can also be chosen for other imaging modalities.

Truly nonionic polymer shells for the encapsulation of living cells

Engineering surfaces of living cells with natural or synthetic compounds can mediate intercellular communication and provide a protective barrier from hostile agents. We report on truly nonionic hydrogen-bonded LbL coatings for cell surface engineering. These ultrathin, highly permeable polymer membranes are constructed on living cells without the cationic component typically employed to increase the stability of LbL coatings. Without the cytotoxic cationic PEI pre-layer, the viability of encapsulated cells drastically increases to 94%, in contrast to 20% viability in electrostatically-bonded LbL shells. Moreover, the long-term growth of encapsulated cells is not affected, thus facilitating efficient function of protected cells in hostile environment.

Interfacing multicellular organisms with polyelectrolyte shells and nanoparticles: a Caenorhabtidis elegans study

We report the surface modification of microscopic live multicellular nematodes Caenorhabtidis elegans with polyelectrolyte multilayers (pure and doped with 20 nm gold nanoparticles) and the direct magnetic functionalization of nematodes with biocompatible magnetic nanoparticles. Magnetically functionalized "ironoxideclad" nematodes can be effectively separated and moved using an external magnetic field. The surface-functionalized nematodes preserve their viability and reproduction.

A whole-cell amperometric herbicide biosensor based on magnetically functionalised microalgae and screen-printed electrodes

We report the fabrication of an amperometric whole-cell herbicide biosensor based on magnetic retention of living cells functionalised with magnetic nanoparticles (MNPs) on the surface of a screen-printed electrode. We demonstrate that Chlorella pyrenoidosa microalgae cells coated with biocompatible MNPs and retained on the electrode with a permanent magnet act as a sensing element for the fast detection of herbicides. The magnetic functionalisation does not affect the viability and photosynthesis activity-mediated triazine herbicide recognition in microalgae. The current of ferricyanide ion was recorded during alternating illumination periods and biosensor fabricated was used to detect atrazine (from 0.9 to 74 µM) and propazine (from 0.6 to 120 µM) (the limits of detection 0.7 and 0.4 µM, respectively). We believe that the methodology presented here can be widely used in fabrication of a number of whole cell biosensors since it allows for efficient and reversible cells immobilisation and does not affect the cellular metabolism.

Investigation of layer-by-layer assembly of polyelectrolytes on fully functional human red blood cells in suspension for attenuated immune response

The encapsulation of live cells with polymeric coat-ings is a versatile approach to modulate or control the response cells to their environment. The layer-by-layer (LbL) self-assembly of nonimmunogenic polyelectrolytes is employed here to attenuate or suppress the binding of antibodies to live red blood cells (RBCs) and, consequently, decrease their inherent immunogenicity toward foreign RBCs. The optimized shell was composed of four bilayers of alginate (AL) and chitosan-graft-phosphorylcholine (CH-PC) surrounded by two bilayers of AL and poly-l-lysine-graft-polyethylene glycol (PLL-PEG). Experimental parameters, including the polyelectrolytes and RBCs concentrations and the cell handling and purification protocols, were optimized to achieve effective encapsulation of live and functional RBCs in suspension. The viability and functionality of coated RBCs were confirmed by a hemolysis assay and by their ability to take up oxygen. The successful immunocamouflage of RBCs was confirmed by observing that the recognition of the ABO/D (Rh) blood group antigens present on the surface of RBCs by their respective antibodies was muted in the case of coated RBCs. The results of this studies mark an important step toward the production of universal RBCs.

Nanoencapsulating living biological cells using electrostatic layer-by-layer self-assembly: platelets as a model

In the literature, a few biological cells have been used as templates to form microcapsules of a variety of shapes and sizes. In this study, we proved the concept that living cells like platelets can be encapsulated with polyelectrolytes using electrostatic layer-by-layer self-assembly (LBL), and, most importantly, the encapsulation process did not induce activation of the platelets. Glycol-chitosan and poly-L-glutamic acid were electrostatically deposited onto platelets, and the encapsulation was confirmed using confocal laser scanning microscopy and scanning electron microscopy. Transmission electron microscopy observation further confirmed that the encapsulation process was mild and the activation of platelets was negligible. The encapsulation of living biological cells like platelets can serve as a model system in a wide range of biomedical applications including local and sustained drug delivery, immune protection of artificial tissues, and versatile artificial blood.

Polypeptide multilayer film co-delivers oppositely-charged drug molecules in sustained manners

The current state-of-the-art for drug-carrying biomedical devices is mostly limited to those that release a single drug. Yet there are many situations in which more than one therapeutic agent is needed. Also, most polyelectrolyte multilayer films intended for drug delivery are loaded with active molecules only during multilayer film preparation. In this paper, we present the integration of capsules as vehicles within polypeptide multilayer films for sustained release of multiple oppositely charged drug molecules using layer-by-layer nanoassembly technology. Calcium carbonate (CaCO(3)) particles were impregnated with polyelectrolytes, shelled with polyelectrolyte multilayers, and then assembled onto polypeptide multilayer films using glutaraldehyde. Capsule-integrated polypeptide multilayer films were obtained after decomposition of CaCO(3) templates. Two oppositely charged drugs were loaded into capsules within polypeptide multilayer films postpreparation based on electrostatic interactions between the drugs and the polyelectrolytes impregnated within capsules. We determined that the developed innovative capsule-integrated polypeptide multilayer films could be used to load multiple drugs of very different properties (e.g., opposite charges) any time postpreparation (e.g., minutes before surgical implantation inside an operating room), and such capsule-integrated films allowed simultaneous delivery of two oppositely charged drug molecules and a sustained (up to two weeks or longer) and sequential release was achieved.

Layer-by-layer nano-encapsulation of microbes: controlled cell surface modification and investigation of substrate uptake in bacteria

LbL nano self-assembly coating of A. vinosum with different polyelectrolyte combinations is presented as an example to investigate substrate uptake in bacteria. The effects of surface charge and the formation of a physical barrier provides new insights in the contact mechanisms between the cell surface and insoluble elemental sulfur. Furthermore, uptake of sulfide by encapsulated cells was investigated. Growth experiments of coated cells showed that surface charge did neither affect sulfide uptake nor the contact formation between the cells and solid sulfur. However, increasing layers slowed or inhibited the uptake of sulfide and elemental sulfur. This work demonstrates how defining surface properties of bacteria has potential for microbiological and biotechnological applications.

Control of cell surface and functions by layer-by-layer nanofilms

Various nanometer-sized multilayers were directly prepared onto the surface of mouse L929 fibroblast cells by a layer-by-layer (LbL) assembly technique to control the cell surface microenvironment and cell functions, such as viability, morphology, and proliferation. The species of LbL nanofilms strongly affected the cell morphology and growth. Polyelectrolyte (PE) multilayers induced a round-shaped morphology of the adhered cells, although each component of the multilayers had high cytocompatibility, whereas fibronectin (FN)-gelatin (G) and -dextran sulfate (DS) multilayers with FN-binding domain interactions (FN films) showed extended morphologies of the cells similar to that of control cells (without films). A clear difference in cell proliferation was observed for PE and FN films. The cells with FN films on their surfaces showed good proliferation profiles independent of the film thickness, but cell proliferation was not observed using the PE films although the cells survived during the culture period. Fluorescence microscopic and scanning electron microscopic observations clearly suggested a nanometer-sized meshwork morphology of the FN films on the cell surface after 24 h of incubation, whereas the PE films showed homogeneous film morphologies on the cell surface. These nanomeshwork morphologies seemed to be similar to the fibrous structure of the natural extracellular matrix. The results of this study demonstrated that the components, charge, and morphology of LbL nanofilms prepared directly on the cell surface strongly affected cell functions, and the effects of these LbL nanofilms on cell functions differed vastly as compared to PE films prepared on a substrate. The preparation of LbL nanofilms onto a cell surface might be a novel and interesting technique to control cell functions.

Polyelectrolyte-mediated assembly of multiwalled carbon nanotubes on living yeast cells

Here we report the three-dimensional assembly of carbon nanotubes on the polyelectrolyte-coated living Saccharomyces cerevisiae cells using the polyelectrolyte-mediated layer-by-layer approach. Synthetic polyelectrolytes poly(allylamine hydrochloride) and poly(sodium 4-styrenesulfonate) were layer-by-layer deposited on the surfaces of the yeast cells followed by the deposition of water-soluble oxidized multiwalled carbon nanotubes (MWNTs) and an additional outermost polyelectrolyte bilayer. This resulted in the fabrication of polyelectrolyte/nanotubes composite coatings on the cell walls of the yeast cells, which could be clearly seen using the conventional optical microscopy. Transmission and scanning electron microscopy was applied to further investigate the composite coatings. Viability of the encapsulated cells was confirmed using the intercellular esterase activity test. Finally, electrochemical studies using voltammetry and electrochemical impedance measurements were performed, indicating that the composite polyelectrolytes/MWNTs coatings sufficiently affect the electron mediation between the encapsulated yeast cells and the artificial electron acceptor, making it possible to distinguish between living and dead cells. The technique described here may find potential application in the development of microelectronic devices, core-shell and hollow composite microparticles, and electrochemical cell-based biosensors.

Multiple functionalities of polyelectrolyte multilayer films: new biomedical applications

The design of advanced functional materials with nanometer- and micrometer-scale control over their properties is of considerable interest for both fundamental and applied studies because of the many potential applications for these materials in the fields of biomedical materials, tissue engineering, and regenerative medicine. The layer-by-layer deposition technique introduced in the early 1990s by Decher, Moehwald, and Lvov is a versatile technique, which has attracted an increasing number of researchers in recent years due to its wide range of advantages for biomedical applications: ease of preparation under "mild" conditions compatible with physiological media, capability of incorporating bioactive molecules, extra-cellular matrix components and biopolymers in the films, tunable mechanical properties, and spatio-temporal control over film organization. The last few years have seen a significant increase in reports exploring the possibilities offered by diffusing molecules into films to control their internal structures or design "reservoirs," as well as control their mechanical properties. Such properties, associated with the chemical properties of films, are particularly important for designing biomedical devices that contain bioactive molecules. In this review, we highlight recent work on designing and controlling film properties at the nanometer and micrometer scales with a view to developing new biomaterial coatings, tissue engineered constructs that could mimic in vivo cellular microenvironments, and stem cell "niches."

Gold nanorods: from synthesis and properties to biological and biomedical applications

Noble metal nanoparticles are capable of confining resonant photons in such a manner as to induce coherent surface plasmon oscillation of their conduction band electrons, a phenomenon leading to two important properties. Firstly, the confinement of the photon to the nanoparticle's dimensions leads to a large increase in its electromagnetic field and consequently great enhancement of all the nanoparticle's radiative properties, such as absorption and scattering. Moreover, by confining the photon's wavelength to the nanoparticle's small dimensions, there exists enhanced imaging resolving powers, which extend well below the diffraction limit, a property of considerable importance in potential device applications. Secondly, the strongly absorbed light by the nanoparticles is followed by a rapid dephasing of the coherent electron motion in tandem with an equally rapid energy transfer to the lattice, a process integral to the technologically relevant photothermal properties of plasmonic nanoparticles. Of all the possible nanoparticle shapes, gold nanorods are especially intriguing as they offer strong plasmonic fields while exhibiting excellent tunability and biocompatibility. We begin this review of gold nanorods by summarizing their radiative and nonradiative properties. Their various synthetic methods are then outlined with an emphasis on the seed-mediated chemical growth. In particular, we describe nanorod spontaneous self-assembly, chemically driven assembly, and polymer-based alignment. The final section details current studies aimed at applications in the biological and biomedical fields.

Encapsulation of bacterial spores in nanoorganized polyelectrolyte shells

Layer-by-layer assembly uses alternating charged layers of polyionic polymers to coat materials sequentially in a sheath of functionalized nanofilms. Bacterial spores were encapsulated in organized ultrathin shells using layer-by-layer assembly in order to assess the biomaterial as a suitable core and determine the physiological effects of the coating. The shells were constructed on Bacillus subtilis spores using biocompatible polymers polyglutamic acid, polylysine, albumin, lysozyme, gelatin A, protamine sulfate, and chondroitin sulfate. The assembly process was monitored by measuring the electrical surface potential (zeta-potential) of the particles at each stage of assembly. Fluorescent laser confocal microscopy and scanning electron microscopy confirmed the formation of uniform coatings on the spores. The coating surface charge and thickness (20-100 nm) could be selectively tuned by using appropriate polymers and the number of bilayers assembled. The effect of each coating type on germination was assessed and compared to native spores. The coated spores were viable, but the kinetics and extent of germination were changed from control spores in all instances. The results and insight gained from the experiments may be used to design various bioinspired systems. The spores can be made dormant for a desired amount of time using the LbL encapsulation technique and can be made active when appropriate.

Fabrication of Anti-human Cardiac Troponin I Immunogold Nanorods for Sensing Acute Myocardial Damage

A facile, rapid, solution-phase method of detecting human cardiac troponin I for sensing myocardial damage has been described using gold nanorods-based biosensors. The sensing is demonstrated by the distinct change of the longitudinal surface plasmon resonance wavelength of the gold nanorods to specific antibody-antigen binding events. For a higher sensitivity, the aspect ratio of gold nanorods is increased up to ca 5.5 by simply adding small amount of HCl in seed-mediated growth solution. Experimental results show that the detecting limit of the present method is 10 ng/mL. Contrast tests reveal that these gold nanorods-based plasmonic biosensors hold much higher sensitivity than that of conventionally spherical gold nanoparticles.

Modulating colloidal adsorption on a two-dimensional protein crystal

The geometric and physicochemical properties of the protein streptavidin make it a useful building block in the construction and manipulation of nanoscale structures and devices. However, one requirement in exploiting streptavidin for "bottom-up" assembly is the capability to modulate protein-nanoparticle interactions. This work examines the effects of pH and the biotin-streptavidin interaction on the adsorption of colloidal gold onto a two-dimensional streptavidin crystal. Particle deposition was carried out below (pH 6), at (pH 7), and above (pH 8) the protein's isoelectric point with both biotinylated and nonbiotinylated nanoparticles. Particle surface coverage depends on deposition time and pH, and increases by 1.4-10 times when biotin is incorporated onto the particle surface. This coverage is highest for both particle types at pH 6 and decreases monotonically with increasing pH. Calculations of interparticle potentials based on Derjaguin-Landau-Verwey-Overbeek (DLVO) theory demonstrate that this trend in surface coverage is most likely due to alterations in particle-surface electrostatic interactions and not a result of changes in interparticle electrostatic repulsion. Furthermore, post-adsorption alterations in pH demonstrate that electrostatically adsorbed particles can be selectively desorbed from the surface. Evaluation of the nonspecifically adsorbed fraction of biotinylated particles indicates that the receptor-ligand adsorption mechanism gives a higher rate of attachment to the substrate than nonspecific, electrostatic adsorption. This results in faster adsorption kinetics and higher coverages for biotinylated particles relative to the nonbiotinylated case.

Investigation of the nonspecific interaction between quantum dots and immunoglobulin G using Rayleigh light scattering

Quantum dots (QDs) have been used as a new class of bioprobes in medical imaging in recent years. The study of interaction between QDs and biomacromolecules is important for interpreting biological data. In this work, Rayleigh light scattering (RLS) was employed to investigate the nonspecific interaction between mercaptoacetic acid modified CdSe/ZnS quantum dots (MAA-QDs) and human immunoglobulin G (IgG). The conjugation processes between QDs and IgG in different conditions including addition sequence, pH were carefully studied. The addition of IgG to QDs solution was found to form a fixed size of QDs-IgG conjugate, with the QDs-to-IgG ratio of approximately 13, while the addition of QDs to IgG solution resulted in a gradually increased conjugate size, with variable QDs-to-IgG ratio till the binding saturation was reached.

Studies on the drug release properties of nano-encapsulated indomethacin microparticles

Indomethacin micro-crystals sized approximately 2 microm have been encapsulated with polyelectrolyte multi-layers for the purpose of controlled release. Charged linear poly (dimethyldiallyl ammonium chloride) (PDDA) and poly (styrene sulphonate) (PSS) were alternatively deposited on approximately 2 microm drug micro-crystals. The release of indomethacin from coated micro-crystals was measured in aqueous solutions of pH 1.4 and 6.8. The polyelectrolyte multi-layer capsule thickness was proved to control. The results provided a method of achieving prolonged drug release through self-assembly of polymeric shells on drug microcrystals.

Nanotechnology in regenerative medicine: the materials side

Regenerative medicine is an emerging multidisciplinary field that aims to restore, maintain or enhance tissues and hence organ functions. Regeneration of tissues can be achieved by the combination of living cells, which will provide biological functionality, and materials, which act as scaffolds to support cell proliferation. Mammalian cells behave in vivo in response to the biological signals they receive from the surrounding environment, which is structured by nanometre-scaled components. Therefore, materials used in repairing the human body have to reproduce the correct signals that guide the cells towards a desirable behaviour. Nanotechnology is not only an excellent tool to produce material structures that mimic the biological ones but also holds the promise of providing efficient delivery systems. The application of nanotechnology to regenerative medicine is a wide issue and this short review will only focus on aspects of nanotechnology relevant to biomaterials science. Specifically, the fabrication of materials, such as nanoparticles and scaffolds for tissue engineering, and the nanopatterning of surfaces aimed at eliciting specific biological responses from the host tissue will be addressed.

Plasmonic photothermal therapy (PPTT) using gold nanoparticles

The use of lasers, over the past few decades, has emerged to be highly promising for cancer therapy modalities, most commonly the photothermal therapy method, which employs light absorbing dyes for achieving the photothermal damage of tumors, and the photodynamic therapy, which employs chemical photosensitizers that generate singlet oxygen that is capable of tumor destruction. However, recent advances in the field of nanoscience have seen the emergence of noble metal nanostructures with unique photophysical properties, well suited for applications in cancer phototherapy. Noble metal nanoparticles, on account of the phenomenon of surface plasmon resonance, possess strongly enhanced visible and near-infrared light absorption, several orders of magnitude more intense compared to conventional laser phototherapy agents. The use of plasmonic nanoparticles as highly enhanced photoabsorbing agents has thus introduced a much more selective and efficient cancer therapy strategy, viz. plasmonic photothermal therapy (PPTT). The synthetic tunability of the optothermal properties and the bio-targeting abilities of the plasmonic gold nanostructures make the PPTT method furthermore promising. In this review, we discuss the development of the PPTT method with special emphasis on the recent in vitro and in vivo success using gold nanospheres coupled with visible lasers and gold nanorods and silica-gold nanoshells coupled with near-infrared lasers.

Nanoencapsulation of Stem Cells within Polyelectrolyte Multilayer Shells

Mouse mesenchymal stem cells have been individually encased by polyelectrolyte layers of poly (L-lysine) and hyaluronic acid using the electrostatic layer-by-layer assembly technique, resulting in a shell consisting of nanolayers of thickness around 6-9 nm. Maintenance of cell morphology and viability were demonstrated for up to one week. Further adjustments to shell permeability and flexibility will facilitate the use of these encapsulated cells in tissue engineering and targeted-delivery applications.

Nanostructure-mediated drug delivery

Nanotechnology is expected to have an impact on all industries including semiconductors, manufacturing, and biotechnology. Tools that provide the capability to characterize and manipulate materials at the nanoscale level further elucidate nanoscale phenomena and equip researchers and developers with the ability to fabricate novel materials and structures. One of the most promising societal impacts of nanotechnology is in the area of nanomedicine. Personalized health care, rational drug design, and targeted drug delivery are some of the benefits of a nanomedicine-based approach to therapy. This review will focus on the development of nanoscale drug delivery mechanisms. Nanostructured drug carriers allow for the delivery of not only small-molecule drugs but also the delivery of nucleic acids and proteins. Delivery of these molecules to specific areas within the body can be achieved, which will reduce systemic side effects and allow for more efficient use of the drug.

Layer-by-layer assembly as a versatile bottom-up nanofabrication technique for exploratory research and realistic application

The layer-by-layer (LbL) adsorption technique offers an easy and inexpensive process for multilayer formation and allows a variety of materials to be incorporated within the film structures. Therefore, the LbL assembly method can be regarded as a versatile bottom-up nanofabrication technique. Research fields concerned with LbL assembly have developed rapidly but some important physicochemical aspects remain uninvestigated. In this review, we will introduce several examples from physicochemical investigations regarding the basics of this method to advanced research aimed at practical applications. These are selected mostly from recent reports and should stimulate many physical chemists and chemical physicists in the further development of LbL assembly. In order to further understand the mechanism of the LbL assembly process, theoretical work, including thermodynamics calculations, has been conducted. Additionally, the use of molecular dynamics simulation has been proposed. Recently, many kinds of physicochemical molecular interactions, including hydrogen bonding, charge transfer interactions, and stereo-complex formation, have been used. The combination of the LbL method with other fabrication techniques such as spin-coating, spraying, and photolithography has also been extensively researched. These improvements have enabled preparation of LbL films composed of various materials contained in well-designed nanostructures. The resulting structures can be used to investigate basic physicochemical phenomena where relative distances between interacting groups is of great importance. Similarly, LbL structures prepared by such advanced techniques are used widely for development of functional systems for physical applications from photovoltaic devices and field effect transistors to biochemical applications including nano-sized reactors and drug delivery systems.

Formation, stability and properties of multilayer emulsions for application in the food industry

The formation of multilayered interfaces around oil droplets in oil-in-water emulsions provides food technologists with a novel means of improving the quality and stability of many food products, as well as the ability to develop novel encapsulation and delivery systems. This article reviews the basic principles of multilayer emulsion formation, discusses the factors that influence the characteristics of the interfaces formed, and highlights the relationship between interfacial properties and emulsion functionality. Finally, it highlights some potential applications of the multilayer emulsion technology in the food industry for improving the stability of emulsions to environmental stresses or for developing controlled or triggered release systems.

Crosslinked polysaccharide nanocapsules: preparation and drug release properties

Crosslinked polysaccharide and composite polysaccharide capsules with diameters ranging from 200 nm to several microns and wall thicknesses of several tens of nanometers have been fabricated by interfacial polymerization of methacrylated N,N-diethylaminoethyl dextran (DdexMA) and DdexMA-vinyl terminated polylactide macromonomers (PLAM). In this method, chloroform droplets or PLAM-containing chloroform droplets were dispersed in water, on which water soluble DdexMA was polymerized to form closed shell structure. Their hollow nature was confirmed by confocal laser scanning microscopy and transmission electron microscopy. Dynamic light scattering revealed that these capsules possess good stability against coagulation during storage. Fourier transform infrared and elemental analysis found that the DdexMA capsules were actually composed of crosslinked DdexMA, while the DdexMA-PLAM capsules were composed of the crosslinked DdexMA-PLAM copolymers and PLAM. By dissolution of ibuprofen in the chloroform droplets, drug-loaded capsules were also fabricated. It was found that the loaded drug could be released again in a sustained manner for up to 100 h. The capsule walls had a prominent effect in slowing down the drug release rate, particularly for the DdexMA-PLAM capsules.

Building three-dimensional nanostructures with active enzymes by surface templated layer-by-layer assembly

We show that well-defined three-dimensional nanostructures of functional enzymes can be controllably fabricated by layer-by-layer assembly of avidin and biotinylated horseradish peroxidase on micro-contact printing patterned surface templates.

Nanoscale internally referenced oxygen sensors produced from self-assembled nanofilms on fluorescent nanoparticles

A novel sensor fabrication concept using indicators trapped in nanoengineered ultrathin films deposited on fluorescent nanoparticles is demonstrated for oxygen sensing. The nanoscale systems are based on the quenching of tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) immobilized within polyelectrolyte multilayers deposited on the surface of nanoparticle templates. The ionically bound nanofilms create a porous scaffold into which controlled precipitation of the chromophore is achieved using a combination of electrostatic attraction and dye insolubility in water. The fluorescent nanoparticles act as physical scaffolds and also provide a complementary spectral signature for use as an internal intensity reference. Oxygen sensors created on 100-nm yellow-green fluorescent particles exhibit a linear Stern-Volmer behavior with a quenching constant of 1.06 mM and sensitivity of 60%, which demonstrates that the dye is still partially accessible to oxygen following immobilization. To demonstrate the feasibility of intracellular metabolic monitoring with such nanoprobes, the oxygen sensors were chemically delivered into human dermal fibroblasts with no apparent loss in cell viability. The results prove that the approach to sensor production is facile and leads to sensitive systems that can be further optimized for improved response, and these findings support the further development of similar self-referenced probes toward quantitative intracellular analysis.

Deposition temperature effect on release rate of indomethacin microcrystals from microcapsules of layer-by-layer assembled chitosan and alginate multilayer films

Indomethacin (IDM) microcrystals sized 5 approximately 10 microm were directly encapsulated with nature polysaccharides chitosan (CHI) and sodium alginate (ALG) through layer-by-layer (LbL) self-assembly. Due to partial dissolution of IDM in the deposition solution, the retention of the IDM microcrystals gradually decreased with increasing deposition times and became 47.7% as 10 layers of polysaccharides formed. The release rate of the IDM from the microcapsules was monitored with UV absorbance. The half release time t(1/2) of IDM in the microcapsule increased with the layer number and the initial burst phenomenon was relieved after encapsulation. It was found that added NaCl did not affect the release rate even up to 0.5 M of its concentration, while increasing the release temperature remarkably speeded up the release process. The prolonged release of the encapsulated IDM was still observed when the aqueous release solution containing 20 vol.% ethanol. It was very significant that increasing deposition temperature from 20 to 60 degrees C reduced the release rate efficiently, owing to the increase in multilayer thickness and formation of a more perfect multilayer film. This finding provides a new and simple method to control the permeability of the LbL assembled multilayer films. Because of the biodegradability of CHI and ALG and various methods to tune the release rate, the LbL self-assembly on drug microcrystals promises high potential for encapsulation used in controlled release.

Ultrathin antibiotic walled microcapsules

Ultrathin microcapsules comprised of anionic polyelectrolytes (PE) and a polycationic aminoglycoside (AmG) antibiotic drug were prepared by depositing PE/AmG multilayers on zinc oxide (ZnO) colloid particles using the layer-by-layer self-assembly technique and subsequently dissolving the ZnO templated cores. The polyelectrolytes, dextran sulfate sodium (DxS) and poly(styrenesulfonate) (PSS), were selected owing to their different backbone structure. An aminoglycoside, tobramycin sulfate (TbS), was used for studying DxS/TbS or PSS/TbS multilayer films. The multilayer growth on ZnO cores was characterized by alternating zeta potential values that were different for the DxS/TbS and PSS/TbS multilayers due to the PE chemistry and its interaction with Zn(2+) ions. Transmission and scanning electron microscopy provide evidence of PE/TbS multilayer coating on ZnO core particles. The slow acid-decomposition of the ZnO cores using weak organic acids and the presence of sufficient quantity of Zn(2+) in the dispersion were required to produce antibiotic multilayer capsules. There was no difference in the morphological characteristics of the two types of capsules; although, the yield for [PSS/TbS](5) capsules was significantly higher than for [DxS/TbS](5) capsules which was related to the physicochemical properties of DxS/TbS/Zn(2+) and PSS/TbS/Zn(2+) complexes forming the capsule wall. The TbS quantity in the multilayer films was determined using a quartz crystal microbalance and high performance liquid chromatography techniques which showed less TbS loading in both, capsules and multilayers on planar gold substrate, than the theoretical DxS:TbS or PSS:TbS stoichiometric ratio. The decomposition of the [PE/TbS](6) multilayers was fastest in physiological buffer followed by mannitol and water. The decomposition rate of the [PSS/TbS](6) multilayers was slower than [DxS/TbS](6) monolayers. The incomplete decomposition of DxS/TbS under saline conditions suggests the major role of hydrogen bonding for stability of DxS/TbS multilayers. A combination of hydrogen bonding and hydrophobic interaction between phenyl rings in PSS was responsible for PSS/TbS multilayer stability. In vivo studies in rabbits highlight the safety and sustained drug delivery potential of the PE/AmG microcapsules. The antibiotic walled ultrathin capsules presented here are suitable for sustained ophthalmic antibiotic delivery.

Encapsulated cells: an atomic force microscopy study

Two types of cells--human platelets and spore cells--were encapsulated in polymer shells by adsorbing polyanions and polycations in a stepwise fashion. The encapsulated cells were attached to gold and silicon surfaces and their morphological and adhesion properties were studied in air using tapping mode atomic force microscopy (AFM). The roughness of the encapsulated cells increased upon the addition of a new polymer layer. The increase in roughness can be attributed to the formation of a shell around the cells, which is stabilized by electrostatic interactions, as well as to the drying effects associated with the immobilization and dehydration of the cells. Trigger mode was used to perform the force imaging and map out the adhesion characteristics of the cells. Systematic "maps" of the adhesion properties of the encapsulated cells to clean and amine terminated AFM tips were collected. The adhesion force data for the different tips and encapsulated cells showed dependence not only on the number and thickness of the polymer layers, but also on the interactions between these layers. The encapsulated cells' morphology and roughness characteristics remained intact over a substantial storage period. This stability and adhesion properties make them suitable building blocks for the design and construction of biomimetic templates where AFM is used as the primary tool to do the fabrication.