Catalytic Carbene Insertion into C−H Bonds

"Sandwich" Diimine-Copper Catalyzed Trifluoroethylation and Pentafluoropropylation of Unactivated C(sp3 )-H Bonds by Carbene Insertion

We report here "sandwich"-diimine copper complex-catalyzed trifluoroethylation and pentafluoropropylation of unactivated C(sp3 )-H bonds in alkyl esters, halides, and protected amines by employing CF3 CHN2 and CF3 CF2 CHN2 reagents. Reactions proceed in dichloromethane solvent at room temperature. Identical C-H functionalization conditions and stoichiometries are employed for generality and convenience. Selectivities for C-H insertions are higher for compounds possessing stronger electron-withdrawing substituents. Preliminary mechanistic studies point to a mechanism involving a pre-equilibrium forming a "sandwich"-diimine copper-CF3 CHN2 complex followed by rate-determining loss of nitrogen affording the reactive copper carbene. It reacts with trifluoromethyldiazomethane about 6.5 times faster than with 1-fluoroadamantane explaining the need for slow addition of the diazo compound.

C-C bond formation via photocatalytic direct functionalization of simple alkanes

The direct functionalization of alkanes represents a very important challenge in the goal to develop more atom-efficient and clean C-C bond forming reactions. These processes, however, are hampered by the low reactivity of the aliphatic C-H bonds. Photocatalytic processes based on hydrogen atom transfer C-H bond activation strategies have become a useful tool to activate and functionalize these inert compounds. In this article, we summarize the main achievements in this field applied to the development of C-C bond forming reactions, and we discuss the key mechanistic features that enable these transformations.

Site-specific proximity labeling at single residue resolution for identification of protein partners in vitro and on cells

The cell surface proteome, or surfaceome, is encoded by more than 4000 genes, but we are only beginning to understand the complexes they form. Rapid proximity labeling around specific membrane targets allows for capturing weak and transient interactions expected in the crowded and dynamic environment of the surfaceome. Recently, a high-resolution approach called μMap has been described (Geri, J. B., Oakley, J. V., Reyes-Robles, T., Wang, T., McCarver, S. J., White, C. H., Rodriguez-Rivera, F. P., Parker, D. L., Hett, E. C., Fadeyi, O. O., Oslund, R. C., and MacMillan, D. W. C. (2020) Science 367 , 1091-1097) in which an iridium (Ir)-based photocatalyst is attached to a specific antibody to target labeling of neighbors utilizing light-activated generation of carbenes from diazirine compounds via Dexter Energy Transfer (DET). Here we studied and optimized the spatial resolution for the method using an oncoprotein complex between the antibody drug, trastuzumab (Traz), and its target HER2. A set of eight single site-specific Ir-catalytic centers were engineered into Traz to study intra- and inter-molecular labeling in vitro and on cells by mass spectrometry. From this structurally well-characterized complex we observed a maximum distance of ∼110 Å for labeling. Labeling occurred almost uniformly over the full range of amino acids, unlike the residue specific labeling of other techniques. To examine on cell labeling that is specific to HER2 as opposed to simply being on the membrane, we compared the labeling patterns for the eight Traz-catalyst species to random labeling of membrane proteins using a metabolically integrated fatty acid catalyst. Our results identified 20 high confidence HER2 neighbors, many novel, that were more than 6-fold enriched compared to the non-specific membrane tethered catalyst. These studies define distance labeling parameters from single-site catalysts placed directly on the membrane target of interest, and more accurately compare to non-specific labeling to identify membrane complexes with higher confidence.

Catalytic generation of ortho-quinone dimethides via donor/donor rhodium carbenes

Substrates engineered to undergo a 1,4-C-H insertion to yield benzocyclobutenes resulted in a novel elimination reaction to yield ortho-quinone dimethide (o-QDM) intermediates that undergo Diels-Alder or hetero-Diels-Alder cycloadditions. The analogous benzylic acetals or ethers avoid the C-H insertion pathway completely and, after hydride transfer, undergo a de-aromatizing elimination reaction to o-QDM at ambient temperature. The resulting dienes undergo a variety of cycloaddition reactions with high diastereo- and regio-selectivity. This is one of the few examples of catalytic generation of o-QDM without the intermediacy of a benzocyclobutene and represents one of the mildest, ambient temperature processes to access these useful intermediates. This proposed mechanism is supported by DFT calculations. Moreover, the methodology was applied to the synthesis of (±)-isolariciresinol in 41% overall yield.

Flow photolysis of aryldiazoacetates leading to dihydrobenzofurans via intramolecular C-H insertion

Flow photolysis of aryldiazoacetates 3-5 leads to C-H insertion to form dihydrobenzofurans 6-8 in a metal-free process, using either a medium pressure mercury lamp (250-390 nm) or LEDs (365 nm or 450 nm) with comparable synthetic outcomes. Significantly, addition of 4,4'-dimethoxybenzophenone 9 results in an increased yield and also alters the stereochemical outcome leading to preferential isolation of the trans dihydrobenzofurans 6a-8a (up to 50% yield), while the cis and trans diastereomers of 6-8 are recovered in essentially equimolar amounts in the absence of a photosensitiser (up to 26% yield).

Latent Carbene in Diaminomethylation of Benzenes: Mechanism and Practical Application

Silylformamidine 1 exists in equilibrium with its carbenic form 1' due to an easy migration of the silyl group. The reaction of 1 with variously substituted fluorobenzenes proceeds as an insertion of the nucleophilic carbene 1' into the most acidic C-H bond upon mixing the reagents and does not require any catalyst. According to DFT calculations, the classical interpretation of the insertion reaction proceeding via a three-membered transition state structure requires high activation energy. Instead, low activation barriers are predicted for a transfer of the most acidic proton in the aromatic substrate to the carbene carbon. As the next step, a barrierless rearrangement of the formed ion pair toward the product completes the process. The reactivity of substituted benzenes in the reaction with silylformamidine can be roughly assessed by calculated pK_a (DMSO) values for the C-H hydrogens. Benzene derivatives having pK_a approx. less than 31 can undergo C-H insertion. The reaction provides aminals as the first products, which can easily be transformed into the corresponding aldehydes via acidic hydrolysis. As silylformamidine 1 is tolerant to many functional groups, the reaction can be applied to numerous benzene derivatives, making it a reliable strategy for application in organic synthesis.

Confronting the Challenge of Asymmetric Carbonyl Addition to Sterically Bulky Isatins: Upgrading Dirhodium(II)/Biphosphine Catalytic System

Catalytic asymmetric addition of arylboronic acids to ketones is a powerful transformation for directly delivering chiral tertiary alcohols. However, there is no successful example of enantioselective addition to steric bulky isatins, which contain bulky substituent at the 4-position. To confront this challenge, in this work a dirhodium/(BTFM-Garphos) system was developed that showed extremely high activity and stereoselectivity, and the reactions were usually finished within a few minutes.

Complete integration of carbene-transfer chemistry into biosynthesis

Biosynthesis is an environmentally benign and renewable approach that can be used to produce a broad range of natural and, in some cases, new-to-nature products. However, biology lacks many of the reactions that are available to synthetic chemists, resulting in a narrower scope of accessible products when using biosynthesis rather than synthetic chemistry. A prime example of such chemistry is carbene-transfer reactions1. Although it was recently shown that carbene-transfer reactions can be performed in a cell and used for biosynthesis2,3, carbene donors and unnatural cofactors needed to be added exogenously and transported into cells to effect the desired reactions, precluding cost-effective scale-up of the biosynthesis process with these reactions. Here we report the access to a diazo ester carbene precursor by cellular metabolism and a microbial platform for introducing unnatural carbene-transfer reactions into biosynthesis. The α-diazoester azaserine was produced by expressing a biosynthetic gene cluster in Streptomyces albus. The intracellularly produced azaserine was used as a carbene donor to cyclopropanate another intracellularly produced molecule-styrene. The reaction was catalysed by engineered P450 mutants containing a native cofactor with excellent diastereoselectivity and a moderate yield. Our study establishes a scalable, microbial platform for conducting intracellular abiological carbene-transfer reactions to functionalize a range of natural and new-to-nature products and expands the scope of organic products that can be produced by cellular metabolism.

Reactivities of α-Oxo BMIDA Gold Carbenes Generated by Gold-Catalyzed Oxidation of BMIDA-Terminated Alkynes

An oxidative strategy is reported to access α-oxo BMIDA gold carbenes directly from BMIDA-terminated alkynes. Besides offering expedient access to seldom studied boryl metal carbenes, these BMIDA gold carbene species undergo facile insertions into methyl, methylene, methine, and benzylic C-H bonds in the absence of the Thorpe-Ingold effect. They also undergo efficient OH insertion, cyclopropanation, and F-C alkylations. This chemistry provides rapid access to structurally diverse α-BMIDA ketones, which are scarcely documented. In combination with DFT studies, the role of BMIDA is established to be an electron-donating group that attenuates the high electrophilicity of the gold carbene center.

Improving a Methane C-H Activation Complex by Metal and Ligand Alterations from Computational Results

We present results for a series of complexes derived from a titanium complex capable of activating C-H bonds under mild conditions (PNP)Ti═CHtBu(CH2tBu), where PNP = N[2-PiPr2-4-methylphenyl]2-. In addition to the initial activation of methane, a tautomerization reaction to a terminal methylidene is also explored due to methylidene's potential use as a synthetic starting point. Analogous complexes with other low-cost 3d transition metals were studied, such as scandium, titanium, vanadium, and chromium as both isoelectronic and isocharged complexes. Our results predict that V(IV) and V(V) complexes are promising for methane C-H bond activation. The V(V) complex has a low rate-determining barrier for methane activation, specifically 16.6 kcal/mol, which is approximately 12 kcal/mol less than that for the Ti complex, as well as having a moderate tautomerization barrier of 29.8 kcal/mol, while the V(IV) complex has a methane activation barrier of 19.0 kcal/mol and a tautomerization barrier of 31.1 kcal/mol. Scandium and chromium complexes are much poorer for C-H bond activation; scandium has very high barriers, while chromium strongly overstabilizes the alkylidene intermediate, potentially stopping the further reaction. In addition to the original PNP ligand, some of the most promising ligands from a previous work were tested, although (as shown previously) modification of the ligand does not typically have large effects on the activity of the system. Our best ligand modification improves the performance of the V(V) complex via the substitution of the nitrogen in PNP by phosphorus, which reduces the tautomerization barrier by 5 to 24.4 kcal/mol.

Visible-Light-Induced Trifluoromethylsulfonylation Reaction of Diazo Compounds Enabled by Manganese Catalysis

A visible-light-induced trifluoromethylsulfonylation reaction of diazo compounds is herein reported. This developed synthetic method captures the relatively rare trifluoromethyl sulfone radicals via coordination to the Mn(acac)₃ catalyst, delivering the corresponding α-trifluoromethyl sulfone esters in good to moderate yields (up to 82%). This protocol exhibits broad substrate scope and is easily carried out under mild reaction conditions. Furthermore, a plausible mechanism of the reaction was investigated through DFT calculations.

Synthesis of Alkynyl Hydrazones from Unprotected Hydrazine and Their Reactivity as Diazo Precursors

Alkynyl hydrazones are synthesized conveniently from 2-oxo-3-butynoates and hydrazine by suppressing the susceptible formation of pyrazoles. The resultant hydrazones are transformed into alkynyl diazoacetates under metal-free and mild oxidative conditions in excellent yields. Further, the alkynyl cyclopropane and propargyl silane carboxylates are synthesized in good yields by developing an unprecedented copper-catalyzed alkynyl carbene transfer reaction.

Tunable Key [3 + 2] and [2 + 1] Cycloaddition of Enaminones and α-Diazo Compounds for the Synthesis of Isomeric Isoxazoles: Metal-Controlled Selectivity

The three-component reactions of enaminones, α-diazo esters/ketones, and t-butyl nitrite (TBN) for the switchable synthesis of isomeric isoxazoles have been realized. The catalysis with Cu(II) salt provides 3,4-disubsituted isoxazoles via [3 + 2] cycloaddition. On the other hand, the catalysis of Ag(I) with identical substrates leads to isomeric isoxazoles with reversed C3 and C4 substitution based on a key [2 + 1] cycloaddition.

Electron-Rich Oxycarbenes: New Synthetic and Catalytic Applications beyond Group 6 Fischer Carbene Complexes

Oxycarbenes have emerged as useful intermediates in synthetic chemistry. Compared to the widely studied oxycarbene metal complexes bearing Group 6 metals, the synthetic and catalytic applications of oxycarbenes beyond Group 6 Fischer carbene complexes are less explored because of the difficulty in controlling their reactivity and the need to use a stoichiometric amount of a presynthesized Group 6 metal carbene complex as the starting material. This Minireview summarizes early synthetic and catalytic applications of late-transition-metal oxycarbene complexes and highlights recent advances in free oxycarbene reactions and transition-metal-catalyzed reactions involving oxycarbenes. We hope this Minireview will inspire further developments in this emerging area.

Dirhodium C-H Functionalization of Hole-Transport Materials

Hole-transport materials (HTMs) based on triarylamine derivatives play important roles in organic electronics applications including organic light-emitting diodes and perovskite solar cells. For some applications, triarylamine derivatives bearing appropriate binding groups have been used to functionalize surfaces, while others have been incorporated as side chains into polymers to manipulate the processibility of HTMs for device applications. However, only a few approaches have been used to incorporate a single surface-binding group or polymerizable group into triarylamine materials. Here, we report that Rh-carbenoid chemistry can be used to insert carboxylic esters and norbornene functional groups into sp² C-H bonds of a simple triarylamine and a 4,4'-bis(diarylamino)biphenyl, respectively. The norbenene-functionalized monomer was polymerized by ring-opening metathesis; the electrochemical, optical, and charge-transport properties of these materials were similar to those of related materials synthesized by conventional means. This method potentially offers straightforward access to a diverse range of HTMs with different functional groups.

Tweezer-Based C-H Oxidation Catalysts Overriding the Intrinsic Reactivity of Aliphatic Ammonium Substrates

The site-selective C-H oxygenation of alkyl chains as well as deactivated positions remains a great challenge for chemists. Here, we report the synthesis and application of four new supramolecular tweezer-based oxidation catalysts. They consist of the well-explored M(pdp/mcp) oxidation moiety and a molecular tweezer capable of binding ammonium salts. All catalysts display preferential oxidation of the strongly deactivated C3/C4 positions, however to different degrees. Furthermore, the best performing catalyst Fe(pdp)Twe was explored with an expanded substrate scope. It was demonstrated that the deactivated positions C3/C4 are also preferentially oxidized in these cases.

A Convergent, Modular Approach to Trifluoromethyl-Bearing 5-Membered Rings via Catalytic C(sp3 )-H Activation

Trifluoromethyl-bearing 5-membered rings are prevalent in bioactive molecules, but modular approaches to these compounds by functionalization of robust C(sp³ )-H bonds in a direct and selective manner are extremely challenging. Herein we report the rhodium-catalyzed α-CF₃ -α-alkyl carbene insertion into C(sp³ )-H bonds of a broad range of substrates to access 7 types of CF₃ -bearing saturated 5-membered carbo- and heterocycles. The reaction is particularly effective for benzylic C-H insertion exerting good site-, diastereo- and enantiocontrol, and applicable to the synthesis of chiral CF₃ analogues of bioactive molecules. Ruthenium α-CF₃ -α-alkyl carbene complexes underwent stoichiometric reactions to give C-H insertion products, lending evidence for the involvement of metal α-CF₃ -α-alkyl carbene species in the catalytic cycle. DFT calculations revealed that the π⋅⋅⋅π attraction and intra-carbene C-H⋅⋅⋅F hydrogen bond elucidate the origin of selectivity of the benzylic C-H insertion reactions.

Theoretical Study on the Copper-Catalyzed ortho-Selective C-H Functionalization of Naphthols with α-Phenyl-α-Diazoesters

The aromatic C(sp2)-H functionalization of unprotected naphthols with α-phenyl-α-diazoesters under mild conditions catalyzed by CuCl and CuCl2 exhibits high efficiency and unique ortho-selectivity. In this study, the combination of density functional theory (DFT) calculations and experiments is employed to investigate the mechanism of C-H functionalization, which reveals the fundamental origin of the site-selectivity. It explains that CuCl-catalyzed ortho-selective C-H functionlization is due to the bimetallic carbene, which differs from the reaction catalyzed by CuCl2 via monometallic carbene. The results demonstrate the function of favourable H-bond interactions on the site- and chemo-selectivity of reaction through stabilizing the rate-determining transition states in proton (1,3)-migration.

Cu-Catalyzed Cross-Electrophilic Coupling of α-Diazoesters with O-Benzoyl Hydroxylamines for the Synthesis of Unnatural N-Alkyl α-Amino Acid Derivatives

We describe a Cu-catalyzed cross-electrophilic coupling reaction for synthesizing α-amino acid derivatives from α-diazoesters with O-benzoyl hydroxylamines with Cu(OAc)₂ as the catalyst and polymethylhydrosilane (PMHS) as the hydride reagent. Excellent functional group compatibilities were demonstrated. With ethyl 2-diazo-3-oxobutanoate as the precursor, a Cu-acetoacetate complex has been characterized by ESI-MS analysis. Results from the radical trap experiments are consistent with the intermediacy of nitrogen-centered radicals. This strategy offers a simple and inexpensive synthesis of α-amino acid derivatives.

Chemodivergent C(sp3)-H and C(sp2)-H Cyanomethylation Using Engineered Carbene Transferases

The ubiquity of C-H bonds presents an attractive opportunity to elaborate and build complexity in organic molecules. Methods for selective functionalization, however, often must differentiate among multiple chemically similar and, in some cases indistinguishable, C-H bonds. An advantage of enzymes is that they can be finely tuned using directed evolution to achieve control over divergent C-H functionalization pathways. Here, we demonstrate engineered enzymes that effect a new-to-nature C-H alkylation with unparalleled selectivity: two complementary carbene C-H transferases derived from a cytochrome P450 from Bacillus megaterium deliver an α-cyanocarbene into the α-amino C(sp3)-H bonds or the ortho-arene C(sp2)-H bonds of N-substituted arenes. These two transformations proceed via different mechanisms, yet only minimal changes to the protein scaffold (nine mutations, less than 2% of the sequence) were needed to adjust the enzyme's control over the site-selectivity of cyanomethylation. The X-ray crystal structure of the selective C(sp3)-H alkylase, P411-PFA, reveals an unprecedented helical disruption which alters the shape and electrostatics in the enzyme active site. Overall, this work demonstrates the advantages of enzymes as C-H functionalization catalysts for divergent molecular derivatization.

Intramolecular Interception of the Remote Position of Vinylcarbene Silver Complex Intermediates by C(sp3 )-H Bond Insertion

The trapping of the elusive vinylogous position of a vinyl carbene with an aliphatic C(sp³ )-H bond has been achieved for the first time during a silver-catalyzed carbene/alkyne metathesis (CAM) process. A Tp^x -containing silver complex first promotes the generation of a donor-acceptor silver carbene which triggers CAM, generating a subsequent donor-donor vinyl silver carbene species, which then undergoes a selective vinylogous C(sp³ )-H bond insertion, leading to the synthesis of a new family of benzoazepines. Density functional theory (DFT) calculations unveil the reaction mechanism, which allows proposing that the C-H bond insertion reaction takes place in a stepwise manner, with the hydrogen shift being the rate determining step.

Visible-light-induced organocatalytic enantioselective N-H insertion of α-diazoesters enabled by indirect free carbene capture

While asymmetric insertion of metal carbenes into H-X (X = C, N, O, etc.) bonds has been well-established, asymmetric control over free carbenes is challenging due to the presence of strong background reactions and lack of any anchor for a catalyst interaction. Here we have achieved the first photo-induced metal-free asymmetric H-X bond insertion of this type. With visible light used as a promoter and a chiral phosphoric acid used as a catalyst, α-diazoesters and aryl amines underwent smooth N-H bond insertion to form enantioenriched α-aminoesters with high efficiency and good enantioselectivity under mild conditions. Key to the success was the use of DMSO as an additive, which served to rapidly capture the highly reactive free carbene intermediate to form a domesticated sulfoxonium ylide.

Copper Complexes with Diazoolefin Ligands and their Photochemical Conversion into Alkenylidene Complexes

Homometallic copper complexes with alkenylidene ligands are discussed as intermediates in catalysis but the isolation of such complexes has remained elusive. Herein, we report the structural characterization of copper complexes with bridging and terminal alkenylidene ligands. The compounds were obtained by irradiation of Cu^I complexes with N-heterocyclic diazoolefin ligands. The complex with a terminal alkenylidene ligand required isolation in a crystalline matrix, and its structural characterization was enabled by in crystallo photolysis at low temperature.

Metal-organic frameworks as chemical nanoreactors for the preparation of catalytically active metal compounds

Since the emergence of metal-organic frameworks (MOFs), a myriad of thrilling properties and applications, in a wide range of fields, have been reported for these materials, which mainly arise from their porous nature and rich host-guest chemistry. However, other important features of MOFs that offer great potential rewards have been only barely explored. For instance, despite the fact that MOFs are suitable candidates to be used as chemical nanoreactors for the preparation, stabilization and characterization of unique functional species, that would be hardly accessible outside the functional constrained space offered by MOF channels, only very few examples have been reported so far. In particular, we outline in this feature recent advances in the use of highly robust and crystalline oxamato- and oxamidato-based MOFs as reactors for the in situ preparation of well-defined catalytically active single atom catalysts (SACS), subnanometer metal nanoclusters (SNMCs) and supramolecular coordination complexes (SCCs). The robustness of selected MOFs permits the post-synthetic (PS) in situ preparation of the desired catalytically active metal species, which can be characterised by single-crystal X-ray diffraction (SC-XRD) taking advantage of its high crystallinity. The strategy highlighted here permits the always challenging large-scale preparation of stable and well-defined SACs, SNMCs and SCCs, exhibiting outstanding catalytic activities.

Mechanistic Details of the Pd-catalyzed and MPAA Ligand-Enabled β-C(sp3 )-H Acetoxylation of Free Carboxylic Acid

Transition metal-catalyzed C-H bond oxidation of free carboxylic acid stands as an economic, selective, and efficient strategy to generate lactones, hydroxylated products, and acetoxylated products and attracts much of the chemists' attention. Herein, we performed a density functional theory study on the mechanism and selectivity in Pd-catalyzed and MPAA ligand-enabled C-H bond acetoxylation reaction. It was found that the ligand, base, and substrate are important in determining the reaction mechanism and the selectivity. The acetic anhydride additive is critical in leading the reaction to be acetoxylation, instead of the lactonization, through a facile σ-bond metathesis mechanism that leads to the Pd-OAc in-termediate. Our study sheds light on the further development of transition metal-catalyzed C-H bond oxidation reactions.

Efficient Synthesis of Diaryl Quaternary Centers by Rh(II)/Xantphos Catalyzed Relay C-H Functionalization and Allylic Alkylation

A three-component reaction of N, N-disubstituted aniline, α-diazo ester, and an allylic electrophile has been realized by [Rh(II)]₂ /Xantphos catalysis, providing a direct access to various aniline derivatives bearing diaryl allylic quaternary centers in good yields. The synthetic utility of this protocol was demonstrated by facile derivatization of the products for preparation of biologically relevant molecules and structural scaffolds, which offers a high potential for increasing the molecular diversity. Mechanistic studies identified α, α-diarylacetate species as an active intermediate, thereby revealing the presence of a C(sp² )-H functionalization of aniline derivatives/allylic alkylation cascade in this attractive catalytic transformation.

Synthesis of 2-iminothiazolidin-4-ones via copper-catalyzed [2 + 1 + 2] tandem annulation

In this paper, an efficient synthesis of 2-iminothiazolidin-4-ones through a copper-catalyzed tandem annulation reaction of alkyl amines, isothiocyanates and diazo acetates is presented. Notable advantages of this [2 + 1 + 2] cyclization methodology include readily accessible starting materials, simple operation, mild reaction conditions, high yields, step-economy and diverse functional group tolerance. In addition, the reaction is applicable to the gram scale synthesis and the preparation of bioactive molecules.

X-H Bond Insertion Promoted by Heterogeneous Dirhodium Metal-Organic Cage with Alkynes as Safe Carbene Precursors

A facile and efficient methodology for the generation of the C-X (X = Si, B) bond through a carbene insertion process was demonstrated using a dirhodium metal-organic cage, MOC-Rh-1, as a heterogeneous catalyst. A series of functionalized alkynes were utilized as safe carbene precursors to furnish Si-H and B-H insertion products in moderate to excellent yields. These reactions featured a high atom-economy, a broad substrate scope, and mild reaction conditions. Moreover, the as-prepared MOC-Rh-1 catalyst was recovered easily from the reaction system by simple centrifugation and reused for ten runs without a significant loss in activity, which made good use of the valuable precious metal rhodium.

α-Aminocarbene-Mediated Si-H Insertion: Deoxygenative Silylation of Aromatic Amides with Silanes

While metal carbene-mediated Si-H insertion reactions have become a powerful strategy to build new C-Si bonds, the utilization of α-aminocarbene intermediates generated from readily available precursors in the Si-H insertion reaction remains a longstanding challenge. Herein, we develop a practical and general strategy to synthesize α-aminosilanes through a deoxygenative cross-coupling of amides and silanes mediated by Sm/SmI₂. Given the simplicity and versatility, this methodology represents a fascinating example for the effective utilization of inert amides as α-aminocarbene precursors in organic synthesis.

Metal-Free C-H Difluoromethylation of Imidazoles with the Ruppert-Prakash Reagent

The reaction of trimethyl(trifluoromethyl)silane-tetrabutylammonium difluorotriphenylsilicate (CF₃SiMe₃-TBAT) with a series of imidazoles gives products of the formal difluorocarbene insertion into the C-H bond at the C-2 position (i.e., C-difluoromethylation). According to NMR spectra, the corresponding 2-(trimethylsilyl)difluoromethyl-substituted derivatives are likely formed as the intermediates in the reaction, and then, they slowly convert to 2-difluoromethyl-substituted imidazoles. Quantum chemical calculations of two plausible reaction mechanisms indicate that it proceeds through the intermediate imidazolide anion stabilized through the interaction with solvent molecules and counterions. In the first proposed mechanism, the anion reacts with difluorocarbene without an activation barrier, and then, the CF₂ moiety of the adduct attacks the CF₃SiMe₃ molecule. After the elimination of the CF₃ anion, 2-(trimethylsilyl)difluromethyl-substituted imidazole is formed. Another possible reaction pathway includes silylation of imidazolide anion at the N-3 atom, followed by the barrierless addition of difluorocarbene at the C-2 atom and then by 1,3-shift of the SiMe₃ group from N-3 to the carbon atom of the CF₂ moiety. Both proposed mechanisms do not include steps with high activation barriers.

A rhodium-catalyzed ylide formation/Smiles rearrangement reaction of chalcogenide ether and triazoles

A Rh(ii)-catalyzed highly stereoselective chalcogenide ylide formation/Smiles rearrangement reaction of diaryl thioether/selenoethers and triazoles was successfully developed.

Enantioselective Single and Dual α-C-H Bond Functionalization of Cyclic Amines via Enzymatic Carbene Transfer

Cyclic amines are ubiquitous structural motifs found in pharmaceuticals and biologically active natural products, making methods for their elaboration via direct C-H functionalization of considerable synthetic value. Herein, we report the development of an iron-based biocatalytic strategy for enantioselective α-C-H functionalization of pyrrolidines and other saturated N-heterocycles via a carbene transfer reaction with diazoacetone. Currently unreported for organometallic catalysts, this transformation can be accomplished in high yields, high catalytic activity, and high stereoselectivity (up to 99:1 e.r. and 20,350 TON) using engineered variants of cytochrome P450 CYP119 from Sulfolobus solfataricus. This methodology was further extended to enable enantioselective α-C-H functionalization in the presence of ethyl diazoacetate as carbene donor (up to 96:4 e.r. and 18,270 TON), and the two strategies were combined to achieve a one-pot as well as a tandem dual C-H functionalization of a cyclic amine substrate with enzyme-controlled diastereo- and enantiodivergent selectivity. This biocatalytic approach is amenable to gram-scale synthesis and can be applied to drug scaffolds for late-stage C-H functionalization. This work provides an efficient and tunable method for direct asymmetric α-C-H functionalization of saturated N-heterocycles, which should offer new opportunities for the synthesis, discovery, and optimization of bioactive molecules.

Heterometallic bond activation enabled by unsymmetrical ligand scaffolds: bridging the opposites

Heterobi- and multimetallic complexes providing close proximity between several metal centers serve as active species in artificial and enzymatic catalysis, and in model systems, showing unique modes of metal-metal cooperative bond activation. Through the rational design of well-defined, unsymmetrical ligand scaffolds, we create a convenient approach to support the assembly of heterometallic species in a well-defined and site-specific manner, preventing them from scrambling and dissociation. In this perspective, we will outline general strategies for the design of unsymmetrical ligands to support heterobi- and multimetallic complexes that show reactivity in various types of heterometallic cooperative bond activation.

Visible-Light-Mediated Energy Transfer Enables the Synthesis of β-Lactams via Intramolecular Hydrogen Atom Transfer

The synthesis of 2-azetidinones (β-lactams) from simple acrylamide starting materials by visible-light-mediated energy transfer catalysis is reported. The reaction features a C(sp3 )-H functionalization via a variation of the Norrish-Yang photocyclization involving a carbon-to-carbon 1,5-hydrogen atom transfer (supported by deuterium labelling and DFT calculations) and can be used for the construction of a diverse range of β-lactam products.

B(C6F5)3-catalyzed oxidation of α-diazoesters using DMF and molecular oxygen as oxygen sources

A metal-free catalytic oxidation of α-diazoesters via a green environmental-friendly route was developed. The α-diazoesters were converted to α-ketoesters using DMF and molecular oxygen as oxygen sources and B(C₆F₅)₃ as the catalyst, without any additives. This protocol has a broad adaptability of substrates and good compatibility with a range of functional groups, and it offers new insight into reactions catalyzed by B(C₆F₅)₃.

Photochemical synthesis of 1,2,4-triazoles via addition reaction of triplet intermediates to diazoalkanes and azomethine ylide intermediates

The reactivity of diazoalkanes most commonly proceeds through the formation of carbene intermediates or dipolar cycloaddition reactions. The reaction of diazoalkanes with intermediates with unpaired electrons, however, is much less elaborated. Herein, we report on the photochemical reaction of acceptor-only diazoalkanes with azodicarboxylates. Photoexcitation of the latter results in the formation of a triplet species, which undergoes an addition reaction with diazoalkanes and formation of an azomethine ylide followed by dipolar cycloaddition reaction with organic nitriles to give a 1,2,4-triazole. The application of this transformation was elaborated in a broad and general substrate scope (48 examples), including scale-up via flow chemistry and downstream transformations. Experimental and computational studies were performed to elucidate the reaction mechanism and to rationalize the reaction outcome.

Chiral Bismuth-Rhodium Paddlewheel Complexes Empowered by London Dispersion: The C-H Functionalization Nexus

Heterobimetallic [BiRh] tetracarboxylate catalysts endowed with 1,3-disilylated phenylglycine paddlewheels benefit from interligand London dispersion. They were originally designed for asymmetric cyclopropanation but are now shown to perform very well in asymmetric C-H functionalization reactions too. Because of the confined ligand sphere about the derived donor/acceptor carbenes, insertions into unhindered methyl groups are kinetically favored, although methylene units also react with excellent levels of asymmetric induction; even gaseous ethane is a suitable substrate. Moreover, many functional groups in both partners are tolerated. The resulting products are synthetically equivalent to the outcome of traditional asymmetric ester alkylation, allylation, benzylation, propargylation and aldol reactions and therefore constitute a valuable nexus to more conventional chemical logic.

Strategies That Utilize Ion Pairing Interactions to Exert Selectivity Control in the Functionalization of C-H Bonds

Electrostatic attraction between two groups of opposite charge, typically known as ion-pairing, offers unique opportunities for the design of systems to enable selectivity control in chemical reactions. Catalysis using noncovalent interactions is an established and vibrant research area, but it is noticeable that hydrogen bonding interactions are still the main interaction of choice in system design. Opposite charges experience the powerful force of Coulombic attraction and have the ability to exert fundamental influence on the outcome of reactions that involve charged reagents, intermediates or catalysts. In this Perspective, we will examine how ion-pairing interactions have been used to control selectivity in C-H bond functionalization processes. This broad class of reactions provides an interesting and thought-provoking lens through which to examine the application of ion-pairing design strategies because it is one that encompasses great mechanistic diversity, poses significant selectivity challenges, and perhaps most importantly is of immense interest to synthetic chemists in both industry and academia. We survey reactions that proceed via radical and ionic mechanisms alongside those that involve transition metal catalysis and will deal with control of site-selectivity and enantioselectivity. We anticipate that as this emerging area develops, it will become an ever-more important design strategy for selectivity control.

Chemo- and Regioselective Multiple C(sp2 )-H Insertions of Malonate Metal Carbenes for Late-Stage Functionalizations of Azahelicenes

Chiral quinacridines react up to four times, step-by-step, with α-diazomalonates under RuII and RhII catalysis. By selecting the catalyst, [CpRu(CH3 CN)3 ][PF6 ] (Cp=cyclopentadienyl) or Rh2 (oct)4 , chemo and regioselective insertions of derived metal carbenes are achieved in favor of mono- or bis-functionalized malonate derivatives, respectively, (r.r.>49 : 1, up to 77 % yield, 12 examples). This multi-introduction of malonate groups is particularly useful to tune optical and chemical properties such as absorption, emission or Brønsted acidity but also cellular bioimaging. Density-functional theory further elucidates the origin of the carbene insertion selectivity and also showcases the importance of conformations in the optical response.