In vivo studies to elucidate the role of extracellular polymeric substances from Azotobacter in immobilization of heavy metals

Role of extracellular polymeric substance (EPS) in toxicity response of soil bacteria Bacillus sp. S3 to multiple heavy metals

Heavy metal resistant bacteria are of great interest because of their potential use in bioremediation. Understanding the survival and adaptive strategies of these bacteria under heavy metal stress is important for better utilization of these bacteria in remediation. The objective of this study was to investigate the role of bacterial extracellular polymeric substance (EPS) in detoxifying against different heavy metals in Bacillus sp. S3, a new hyper antimony-oxidizing bacterium previously isolated from contaminated mine soils. The results showed that Bacillus sp. S3 is a multi-metal resistant bacterial strain, especially to Sb(III), Cu(II) and Cr(VI). Toxic Cd(II), Cr(VI) and Cu(II) could stimulate the secretion of EPS in Bacillus sp. S3, significantly enhancing the adsorption and detoxification capacity of heavy metals. Both Fourier transform infrared spectroscopy (FTIR) and three-dimensional excitation-emission matrix (3D-EEM) analysis further confirmed that proteins were the main compounds of EPS for metal binding. In contrast, the EPS production was not induced under Sb(III) stress. Furthermore, the TEM-EDX micrograph showed that Bacillus sp. S3 strain preferentially transported the Sb(III) to the inside of the cell rather than adsorbed it on the extracellular surface, indicating intracellular detoxification rather than extracellular EPS precipitation played an important role in microbial resistance towards Sb(III). Together, our study suggests that the toxicity response of EPS to heavy metals is associated with difference in EPS properties, metal types and corresponding environmental conditions, which is likely to contribute to microbial-mediated remediation.

Enhancement in adsorption potential of microplastics in sewage sludge for metal pollutants after the wastewater treatment process

Microplastics (MPs) as new pollutants of environmental concern have been widely detected in sewage sludge, and may act as significant vectors for metal pollutants due to their adsorption property. Our findings show that Cd, Pb, and Co, but not Ni, contents in sewage sludge are lower than that of corresponding metal irons adsorbed on sludge-based MPs, indicating that the MPs accumulate such metal pollutants as Cd in the sludge samples. In contrast to virgin MPs, sludge-based MPs are one order of magnitude higher adsorption capacity for Cd, which reaches up to 2.523 mg g^-1, implying that there is a considerable enhancement in adsorption potential of the MPs for metals after the wastewater treatment process. SEM analysis shows that sludge-based MPs have rougher and more porous surface than virgin MPs, and FTIR spectra reveal that functional groups such as CO and OH are found on sludge-based MPs. Further, two-dimensional FTIR correlation spectroscopy indicates that CO and NH functional groups play a vital role in the process that sludge-based MPs adsorb Cd, which are not found in virgin MPs. The results imply that increased adsorption potentials of the sludge-based MPs to Cd are attributed to changes in the MP physicochemical properties during wastewater treatment process. In addition, such factors as pH value, and sludge inorganic and organic components also have an effect on the MP adsorption to Cd. Principal component analysis shows that the MPs could be divided into three categories, i.e. polyamide, rubbery MPs (polyethylene and polypropylene) and glassy MPs (polyvinyl chloride and polystyrene). Their adsorption potentials to Cd follow the decreasing order: polyamide > rubbery MPs > glassy MPs. In summary, these findings indicate that MPs may exert an important influence on fate and transport of metal pollutants during sewage sludge treatment process, which deserves to be further concerned.

Impact of double inoculation with Bradyrhizobium japonicum E109 and Azospirillum brasilense Az39 on soybean plants grown under arsenic stress

Inoculation practice with plant growth-promoting bacteria (PGPB) has been proposed as a good biotechnological tool to enhance plant performance and alleviate heavy metal/metalloid stress. Soybean is often cultivated in soil with high arsenic (As) content or irrigated with As-contaminated groundwater, which causes deleterious effects on its growth and yield, even when it was inoculated with rhizobium. Thus, the effect of double inoculation with known PGPB strains, Bradyrhizobium japonicum E109 and Azospirillum brasilense Az39 was evaluated in plants grown in pots under controlled conditions and treated with As. First, the viability of these co-cultivated bacteria was assayed using a flow cytometry analysis using SYTO9 and propidium iodide (PI) dyes. This was performed in vitro to evaluate the bacterial population dynamic under 25 μM AsV and AsIII treatment. A synergistic effect was observed when bacteria were co-cultured, since mortality diminished, compared to each growing alone. Indole acetic acid (IAA) produced by A. brasilense Az39 would be one of the main components involved in B. japonicum E109 mortality reduction, mainly under AsIII treatment. Regarding in vivo assays, under As stress, plant growth improvement, nodule number and N content increase were observed in double inoculated plants. Furthermore, double inoculation strategy reduced As translocation to aerial parts thus improving As phytostabilization potential of soybean plants. These results suggest that double inoculation with B. japonicum E109 and A. brasilense Az39 could be a safe and advantageous practice to improve growth and yield of soybean exposed to As, accompanied by an important metalloid phytostabilization.

Molecular characterization of acutely and gradually heavy metal acclimated aquatic bacteria by FTIR spectraoscopy

In the environment, bacteria can be exposed to the concentration gradient of toxic heavy metals (gradual) or sudden high concentration of them (acute). In both situations, bacteria get acclimated to toxic heavy metal concentrations. Acclimation causes metabolic and molecular changes in bacteria. In this study, we aimed to understand whether there are differences between molecular profiles of the bacteria (Brevundimonas, Gordonia and Microbacterium) which are under acute or gradual exposure to cadmium or lead by using ATR-FTIR spectroscopy. Our results revealed the differences between the acclimation groups in membrane dynamics including changes in the structure and composition of the membrane lipids and proteins. Furthermore, protein concentrations decreased in acclimated bacterial groups. Also, a remarkable increase in exopolymer production occurred in acclimated groups. Interestingly, bacteria under acute cadmium exposure produced the significantly higher amount of exopolymer than they did under gradual exposure. On the contrary, under lead exposure gradually acclimate strains produced significantly higher amounts of exopolymer than those of acutely acclimated ones. This information can be used in bioremediation studies to obtain bacterial strains producing a higher amount of exopolymer.

Extracellular Polymeric Substances Acting as a Permeable Barrier Hinder the Lateral Transfer of Antibiotic Resistance Genes

Antibiotic resistance genes (ARGs) in bacteria are emerging contaminants as their proliferation in the environment poses significant threats to human health. It is well recognized that extracellular polymeric substances (EPS) can protect microorganisms against stress or damage from exogenous contaminants. However, it is not clear whether EPS could affect the lateral transfer of ARGs into bacteria, which is one of the major processes for the dissemination of ARGs. This study investigated the lateral transfer of ARGs carried by plasmids (pUC19, pHSG298, and pHSG396) into competent Escherichia coli cells with and without EPS. Transformant numbers and transformation efficiency for E. coli without EPS were up to 29 times of those with EPS at pH 7.0 in an aqueous system. The EPS removal further increased cell permeability in addition to the enhanced cell permeability by Ca²⁺, which could be responsible for the enhanced lateral transfer of ARGs. The fluorescence quenching experiments showed that EPS could strongly bind to plasmid DNA in the presence of Ca²⁺ and the binding strength (LogK_A = 10.65–15.80 L mol^-1) between EPS and plasmids was positively correlated with the enhancement percentage of transformation efficiency resulting from the EPS removal. X-ray photoelectron spectroscopy (XPS) analyses and model computation further showed that Ca²⁺ could electrostatically bind with EPS mainly through the carboxyl group, hydroxyl group, and RC-O-CR in glucoside, thus bridging the plasmid and EPS. As a result, the binding of plasmids with EPS hindered the lateral transfer of plasmid-borne ARGs. This study improved our understanding on the function of EPS in controlling the fate and transport of ARGs on the molecular and cellular scales.

A novel waste activated sludge multistage utilization strategy for preparing carbon-based Fenton-like catalysts: Catalytic performance assessment and micro-interfacial mechanisms

Waste activated sludge (WAS) contains many anionic functional groups which can interact with heavy metal ions through electrostatic action and complexation reactions. The transition metals adsorbed in WAS can catalyze sludge pyrolysis in anaerobic conditions and improve structural properties of organic matter. In this work, a multistage WAS utilization process for preparing the carbon-based Fenton-like catalysis materials is proposed. More specifically, WAS is firstly used as an adsorbent for heavy metals (Cu and Ni) removal, and then complexes are converted into heterogeneous Fenton-like carbon-based catalysts through oxygen-free pyrolysis. The mechanisms of interactions between extracellular polymeric substances (EPS) and metals are investigated, and the physicochemical properties of sludge-based carbons (SBC) are comprehensively characterized using varies techniques. It is found that WAS is an excellent adsorbent for Cu and Ni removal, which is mainly due to the coordination and electrostatic interactions between EPS and heavy metals. Cu and Ni adsorbed in WAS significantly improved the porous structure of SBC. Both adsorption and catalytic oxidization of Cu/Ni-SBC contribute the removal of E2 in real wastewater. The E2 removal mechanism is explored by electron-spin resonance spectroscopy (ESR) analysis, and it is found that both of ^.O₂^- and ^.OH radicals are responsible for E2 degradation in Cu(II)-SBC-H₂O₂, while ^.O₂^- radicals contributes to E2 degradation in Ni(II)-SBC-H₂O₂ system, so the former performed better than the latter in total removal of E2. Besides, Cu(II) and Cu(I) are both formed in Cu(II)-SBC during the oxidation process, while only Ni(II) is found in the Ni(II)-SBC-H₂O₂ process, confirming that different catalytic oxidation reactions are occurred in the Cu(II)-SBC-H₂O₂ and Ni(II)-SBC-H₂O₂ processes. This study facilitates a great strategy to the sludge multi-stage circulating utilization and a better understanding about the role of the Cu/Ni existed in SBC during the estrogens removal process.

Identification and function of extracellular protein in wastewater treatment using proteomic approaches: A minireview

Microbial extracellular proteins serve as important functions in wastewater treatment process. Analysis of their compositions and properties is crucial to probe their specific functions. However, conventional analytical techniques cannot obtain interest protein information from complex proteins. Recently, the extracellular proteomics method has been applied to resolve the composition of extracellular proteins. In order to better understand the roles of extracellular protein in wastewater treatment process, this review provides the information on the proteomics methods and their application in investigating extracellular proteins involved in microbial attachment/aggregation, biodegradation of pollutants, and response to environmental stresses. Future work needs to exploit the full capability of the proteome.

Role of Extracellular Polymeric Substances in a Methane Based Membrane Biofilm Reactor Reducing Vanadate

For the first time, we demonstrated vanadate (V(V)) reduction in a membrane biofilm reactor (MBfR) using CH₄ as the sole electron donor. The V(V)-reducing capability of the biofilm kept increasing, with complete removal of V(V) achieved when the influent surface loading of V(V) was 363 mg m^-2 day^-1. Almost all V(V) was reduced to V(IV) precipitates, which is confirmed by a scanning electron microscope coupled to energy dispersive X-ray spectroscopy (SEM-EDS) and X-ray photoelectron spectroscopy (XPS). Microbial community analysis revealed that denitrifiers Methylomonas and Denitratisoma might be the main genera responsible for V(V) reduction. The constant enrichment of Methylophilus suggests that the intermediate (i.e., methanol) from CH₄ metabolism might be used as the electron carriers for V(V) bioreduction. Intrusion of V(V) (2-5 mg/L, at the surface loading of 150-378 mg m^-2 day^-1) into the biofilm stimulated the secretion of extracellular polymeric substances (EPS), but high loading of V(V) (10 mg/L, at the surface loading of 668 mg m^-2 day^-1) decreased the amount of EPS. Metagenomic prediction analysis established the strong correlation between the secretion of EPS and the microbial metabolism associated with V(V) reduction, tricarboxylic acid cycle (TCA) cycle, methane oxidation, and ATP production, and EPS might relieve the oxidative stress induced by high loading of V(V). Colorimetric determination and a three-dimensional excitation-emission matrix (3D-EEM) showed that tryptophan and humic acid-like substances might play important roles in microbial cell protection and V(V) binding. Fourier transform infrared (FTIR) spectroscopy identified hydroxyl (-OH) and carboxyl (COO^-) groups in EPS as the candidate functional groups for binding V(V).

Long-term effects of environmentally relevant concentrations of silver nanoparticles on microbial biomass, enzyme activity, and functional genes involved in the nitrogen cycle of loamy soil

The increasing production and use of engineered silver nanoparticles (AgNP) in industry and private households are leading to increased concentrations of AgNP in the environment. An ecological risk assessment of AgNP is needed, but it requires understanding the long term effects of environmentally relevant concentrations of AgNP on the soil microbiome. Hence, the aim of this study was to reveal the long-term effects of AgNP on soil microorganisms. The study was conducted as a laboratory incubation experiment over a period of one year using a loamy soil and AgNP concentrations ranging from 0.01 to 1 mg AgNP/kg soil. The short term effects of AgNP were, in general, limited. However, after one year of exposure to 0.01 mg AgNP/kg, there were significant negative effects on soil microbial biomass (quantified by extractable DNA; p = 0.000) and bacterial ammonia oxidizers (quantified by amoA gene copy numbers; p = 0.009). Furthermore, the tested AgNP concentrations significantly decreased the soil microbial biomass, the leucine aminopeptidase activity (quantified by substrate turnover; p = 0.014), and the abundance of nitrogen fixing microorganisms (quantified by nifH gene copy numbers; p = 0.001). The results of the positive control with AgNO3 revealed predominantly stronger effects due to Ag⁺ ion release. Thus, the increasing toxicity of AgNP during the test period may reflect the long-term release of Ag⁺ ions. Nevertheless, even very low concentrations of AgNP caused disadvantages for the microbial soil community, especially for nitrogen cycling, and our results confirmed the risks of releasing AgNP into the environment.

Robust performance of a membrane bioreactor for removing antibiotic resistance genes exposed to antibiotics: Role of membrane foulants

Antibiotic resistance genes (ARGs) are an emerging concern in wastewater treatment plants (WWTPs), as dissemination of ARGs can pose a serious risk to human health. Few studies, however, have quantified ARGs in membrane bioreactors (MBRs), although MBRs have been widely used for both municipal and industrial wastewater treatment. To reveal the capacity of MBRs for removal of ARGs and the response of membrane fouling after antibiotic exposure, five typical ARG subtypes (sulI, sulII, tetC, tetX and ereA) and int1 were quantified affiliated by systematic membrane foulants analysis in a laboratory-scale anoxic/aerobic membrane bioreactor (A/O-MBR). Sulfamethoxazole and tetracycline hydrochloride additions increased ARG abundances by 0.5-1.4 orders of magnitude in the activated sludge, while the ARG removal performance of the membrane module remained stable (or even increased with ARG absolute abundance in several cases), with the abundance of removed ARGs ranging from 0.6 to 5.6 orders of magnitude. Specifically, the distribution of ARGs in membrane foulants accounted for 13%-25% of the total absolute abundance of all tested MBR samples. Indeed, substantial fouling occurred after the antibiotic additions, with the mean concentrations of soluble microbial product (SMP) and extracellular polymeric substance (EPS) increasing by 340% and 220%, respectively, in a membrane fouling cycle; moreover, the contents of EPS and SMP in the membrane foulants were significantly correlated with the ARG absolute abundance of membrane foulants (p < 0.05), among which more significant correlations occurred between both the protein and polysaccharide of foulants than that with humic acid. The dense membrane fouling layer and the membrane itself constituted dual barriers that effectively avoided the leakage of ARGs from the membrane module. Our findings provide fundamental insights into the proliferation and removal of ARGs in MBR systems, and highlight the contribution of membrane fouling to ARG removals in terms of the potential of MBR as an effective strategy to reduce ARG levels in WWTP effluent.

Exopolysaccharides from Marine and Marine Extremophilic Bacteria: Structures, Properties, Ecological Roles and Applications

The marine environment is the largest aquatic ecosystem on Earth and it harbours microorganisms responsible for more than 50% of total biomass of prokaryotes in the world. All these microorganisms produce extracellular polymers that constitute a substantial part of the dissolved organic carbon, often in the form of exopolysaccharides (EPS). In addition, the production of these polymers is often correlated to the establishment of the biofilm growth mode, during which they are important matrix components. Their functions include adhesion and colonization of surfaces, protection of the bacterial cells and support for biochemical interactions between the bacteria and the surrounding environment. The aim of this review is to present a summary of the status of the research about the structures of exopolysaccharides from marine bacteria, including capsular, medium released and biofilm embedded polysaccharides. Moreover, ecological roles of these polymers, especially for those isolated from extreme ecological niches (deep-sea hydrothermal vents, polar regions, hypersaline ponds, etc.), are reported. Finally, relationships between the structure and the function of the exopolysaccharides are discussed.

Adsorption of cesium ion by marine actinobacterium Nocardiopsis sp. 13H and their extracellular polymeric substances (EPS) role in bioremediation

This paper evaluates the cesium adsorption of marine actinobacterium Nocardiposis sp. 13H strain isolated from nuclear power plant sites in India. It could remove 88.6 ± 0.72% of Cs⁺ from test solution containing 10 mM CsCl₂. The biosorption of Cs⁺ with different environmental factors such as pH, temperature, and time interval is also determined. Scanning electron microscopy coupled with energy dispersive spectroscopy (EDS) confirmed the Cs⁺ adsorption by Nocardiopsis sp. 13H. Most of the bound cesium was found to be associated extracellular polymeric substances (EPS) suggesting its interaction with the surface active groups. The main component of the EPS was carbohydrate followed by protein and nucleic acid. Further, Fourier transform infrared (FTIR) spectroscopy suggested the carboxyl, hydroxyl, and amide groups on the strain cell surface were likely to be involved in Cs⁺ adsorption. Results from this study show Nocardiopsis sp. 13H microorganism could be useful in exploring the biosorption of radioisotope pollution and developing efficient and eco-friendly biosorbent for environmental cleanup.

Reduction of cadmium uptake in rice endophytically colonized with the cadmium-tolerant bacterium Cupriavidus taiwanensis KKU2500-3

The effects of the cadmium (Cd)-tolerant bacterium Cupriavidus taiwanensis KKU2500-3 on the growth, yield, and Cd concentration in rice grains were investigated in the rice variety Phitsanulok 2 (PL2), which was cultivated in a hydroponic greenhouse. The numbers of Cd-tolerant bacteria isolated from the roots and shoots of plants under the RB (rice with bacteria) and RBC (rice with bacteria and Cd) treatments ranged from 2.60 to 9.03 and from 3.99 to 9.60 log cfu·g−1 of PL2, respectively. This KKU2500-3 strain was successfully colonized in rice, indicating that it was not only nontoxic to the plants but also became distributed and reproduced throughout the plants. Scanning electron microscopy analysis revealed attachment of the bacterium to the root surface, whereas the internally colonized bacteria were located in the vascular tissue, cell wall, and intercellular space. Although the Cd contents found in PL2 were very high (189.10 and 79.49 mg·kg−1 in the RC (rice with Cd) and RBC roots, respectively), the Cd accumulated inside the rice seeds at densities of only 3.10 and 1.31 mg·kg−1, respectively; thus, the bacteria reduced the Cd content to 57.74% of the control content. Therefore, the colonizing bacteria likely acted as an inhibitor of Cd translocation in PL2.

Bacterial mediated alleviation of heavy metal stress and decreased accumulation of metals in plant tissues: Mechanisms and future prospects

Heavy metal pollution of agricultural soils is one of main concerns causing some of the different ecological and environmental problems. Excess accumulation of these metals in soil has changed microbial community (e.g., structure, function, and diversity), deteriorated soil, decreased the growth and yield of plant, and entered into the food chain. Plants' tolerance to heavy metal stress needs to be improved in order to allow growth of crops with minimum or no accumulation of heavy metals in edible parts of plant that satisfy safe food demands for the world's rapidly increasing population. It is well known that PGPRs (plant growth-promoting rhizobacteria) enhance crop productivity and plant resistance to heavy metal stress. Many recent reports describe the application of heavy metal resistant-PGPRs to enhance agricultural yields without accumulation of metal in plant tissues. This review provides information about the mechanisms possessed by heavy metal resistant-PGPRs that ameliorate heavy metal stress to plants and decrease the accumulation of these metals in plant, and finally gives some perspectives for research on these bacteria in agriculture in the future.

Characterization of extracellular polymeric substance (EPS) fractions produced by Microcystis aeruginosa under the stress of linoleic acid sustained-release microspheres

This paper focuses on the characterization of extracellular polymeric substances (EPS), which are composed of soluble EPS (SL-EPS), loosely bound EPS (LB-EPS), and tightly bound EPS (TB-EPS) produced by Microcystis aeruginosa under the stress of linoleic acid (LA) and LA sustained-release microspheres. Three-dimensional excitation-emission matrix (3D-EEM) fluorescence spectroscopy and Fourier transform infrared (FTIR) spectrometry were used to characterize three forms of EPS while the content of polysaccharide and protein was tested, respectively. The results showed that the highest inhibitor rate (IR) occurred when M. aeruginosa were exposed to LA sustained-release microspheres of 0.3 g L^-1. The 3D-EEM contour demonstrated that tryptophan and protein-like substances were detected in all three EPS fractions, whereas humic acid-like substance was only distributed in SL-EPS, and aromatic proteins merely existed in LB-EPS and TB-EPS. The infrared spectrum showed that functional groups in three EPS fractions had no obvious change in all experimental groups. Polysaccharide (1120-1270 cm^-1, C-O-C and C-O stretching vibration) and protein (1384-1670 cm^-1, C-N and N-H stretching) were detected in three forms of EPS. Graphical abstract ᅟ.

Plant growth-promoting actinobacteria: a new strategy for enhancing sustainable production and protection of grain legumes

Grain legumes are a cost-effective alternative for the animal protein in improving the diets of the poor in South-East Asia and Africa. Legumes, through symbiotic nitrogen fixation, meet a major part of their own N demand and partially benefit the following crops of the system by enriching soil. In realization of this sustainability advantage and to promote pulse production, United Nations had declared 2016 as the "International Year of pulses". Grain legumes are frequently subjected to both abiotic and biotic stresses resulting in severe yield losses. Global yields of legumes have been stagnant for the past five decades in spite of adopting various conventional and molecular breeding approaches. Furthermore, the increasing costs and negative effects of pesticides and fertilizers for crop production necessitate the use of biological options of crop production and protection. The use of plant growth-promoting (PGP) bacteria for improving soil and plant health has become one of the attractive strategies for developing sustainable agricultural systems due to their eco-friendliness, low production cost and minimizing consumption of non-renewable resources. This review emphasizes on how the PGP actinobacteria and their metabolites can be used effectively in enhancing the yield and controlling the pests and pathogens of grain legumes.

Role of microgel formation in scavenging of chromophoric dissolved organic matter and heavy metals in a river-sea system

We use riverine and marine dissolved organic carbon (DOC) polymers to examine their aggregation behavior, and to evaluate the roles of microgel formation in scavenging of chromophoric dissolved organic matter (CDOM) and heavy metals in a river-sea system. Our results indicate that riverine and marine microgels did not exhibit very much difference in size and self-assembly curve; however, the assembly effectiveness ([microgel]/DOC) of marine samples was much higher than riverine. Instead of concentration of DOC, other factors such as types and sources of DOC polymers may control the microgel abundance in aquatic environments. After filtering water samples (microgels removed), the CDOM and selected metals (Cu, Ni, Mn) in the filtrate were quantified. CDOM and metals were concurrently removed to an extent via DOC polymer re-aggregation, which also suggested that the microgels had sequestering capability in CDOM and metals. This finding provides an alternative route for CDOM and heavy metals removal from the water column. As such the process of re-aggregation into microgels should then be considered besides traditional phase partitioning in the assessment of the ecological risk and fate of hazardous materials.

Acute Responses of Microorganisms from Membrane Bioreactors in the Presence of NaOCl: Protective Mechanisms of Extracellular Polymeric Substances

Extracellular polymeric substances (EPS) are key foulants in membrane bioreactors (MBRs). However, their positive functions of protecting microorganisms from environmental stresses, e.g., during in situ hypochlorite chemical cleaning of membranes, have not been adequately elucidated. In this work, we investigated the response of microorganisms in an MBR to various dosages of NaOCl, with a particular emphasis on the mechanistic roles of EPS. Results showed that functional groups in EPS such as the hydroxyl and amino groups were attacked by NaOCl, causing the oxidation of polysaccharides, denaturation of amino acids, damage to protein secondary structure, and transformation of tryptophan protein-like substances to condensed aromatic ring substances. The presence of EPS alleviated the negative impacts on catalase and superoxide dismutase, which in turn reduced the concentration of reactive oxygen species (ROS) in microbial cells. The direct extracellular reaction and the mitigated intracellular oxidative responses facilitated the maintenance of microbial metabolism, as indicated by the quantity of adenosine triphosphate and the activity of dehydrogenase. The reaction with NaOCl also led to the changes of cell integrity and adhesion properties of EPS, which promoted the release of organic matter into bulk solution. Our results systematically demonstrate the protective roles of EPS and the underlying mechanisms in resisting the environmental stress caused by NaOCl, which provides important implications for in situ chemical cleaning in MBRs.

Influence of bacterial extracellular polymeric substances on the sorption of Zn on γ-alumina: A combination of FTIR and EXAFS studies

Extracellular polymeric substances (EPS) isolated from bacteria, are abound of functional groups which can react with metals and consequently influence the immobilization of metals. In this study, we combined with Zn K-edge Extended X-ray Absorption Fine Structure (EXAFS), Fourier Transform Infrared (FTIR) spectroscopy, and High-Resolution Transmission Electron Microscopy (HRTEM) techniques to study the effects of EPS isolated from Bacillus subtilis and Pseudomonas putida on Zn sorption on γ-alumina. The results revealed that Zn sorption on aluminum oxide was pH-dependent and significantly influenced by bacterial EPS. At pH 7.5, Zn sorbed on γ-alumina was in the form of Zn-Al layered doubled hydroxide (LDH) precipitates, whereas at pH 5.5, Zn sorbed on γ-alumina was as a Zn-Al bidentate mononuclear surface complex. The amount of sorbed Zn at pH 7.5 was 1.3-3.7 times higher than that at pH 5.5. However, in the presence of 2 g L^-1 EPS, regardless of pH conditions and EPS source, Zn + EPS + γ-alumina ternary complex was formed on the surface of γ-alumina, which resulted in decreased Zn sorption (reduced by 8.4-67.8%) at pH 7.5 and enhanced Zn sorption (increased by 10.0-124.7%) at pH 5.5. The FTIR and EXAFS spectra demonstrated that both the carboxyl and phosphoryl moieties of EPS were crucial in this process. These findings highlight EPS effects on Zn interacts with γ-alumina.

Optimization of Extracellular Polymeric Substances production using Azotobacter beijreinckii and Bacillus subtilis and its application in chromium (VI) removal

Extracellular Polymeric Substances (EPS) of microbial origin are complex biopolymers and vary greatly in their chemical composition. They have a great potential in chelation of metal ions. In this work, the effect of growth phase, temperature and pH on production of EPS by two bacteria Azotobacter beijreinckii and Bacillus subtilis have been studied. Extracted EPS was used to remove Cr(VI) from aqueous system. A. beijreinckii produced maximum EPS after 24h at pH 7 and temperature 30°C while B. subtilis produced maximum EPS after 96h at pH 7 and temperature 37°C. For an initial concentration of 10ppm, 26% and 48% Cr(VI) removal was recorded for EPS derived from A. beijreinckii and B. subtilis respectively. The presence of functional groups on EPS and their interaction with Cr(VI) was confirmed using Fourier-transform infrared (FTIR) spectra analysis. In both the bacteria, carboxyl and phosphate groups show involvement in metal binding.

Beneficial role of bacterial endophytes in heavy metal phytoremediation

Phytoremediation is an emerging technology that uses plants and their associated microbes to clean up pollutants from the soil, water and air. In recent years, phytoremediation assisted by bacterial endophytes has been highly recommended for cleaning up of metal polluted soils since endophytic bacteria can alleviate metal toxicity in plant through their own metal resistance system and facilitate plant growth under metal stress. Endophytic bacteria improve plant growth in metal polluted soils in two different ways: 1) directly by producing plant growth beneficial substances including solubilization/transformation of mineral nutrients (phosphate, nitrogen and potassium), production of phytohormones, siderophores and specific enzymes; and 2) indirectly through controlling plant pathogens or by inducing a systemic resistance of plants against pathogens. Besides, they also alter metal accumulation capacity in plants by excreting metal immobilizing extracellular polymeric substances, as well as metal mobilizing organic acids and biosurfactants. The present work aims to review the progress of recent research on the isolation, identification and diversity of metal resistant endophytic bacteria and illustrate various mechanisms responsible for plant growth promotion and heavy metal detoxification/phytoaccumulation/translocation in plants.

Mechanistic understanding of reduced AgNP phytotoxicity induced by extracellular polymeric substances

A knowledge gap concerning the potential effects of extracellular polymeric substances (EPS), a common organic material but highly variable in their composition of microbial origin, on the fate and phytotoxicity of silver nanoparticles (AgNP) still remains. A 48-h root elongation toxicity test showed that AgNP toxicity to wheat Triticum aestivum L. was dramatically alleviated by EPS isolated from Pseudomonas putida, as revealed by 7-59% increase in relative root elongation (RRE), 8-99% increase in root weight, 27-32% decrease in malondialdehyde (MDA) content and 11-43% decrease in H2O2 content compared to the treatment with AgNP in the absence of EPS. This was coincident with 7-69% decrease in root Ag concentrations. Our results showed that EPS could protect wheat seedlings from AgNP toxicity by reducing dissolved Ag concentration ([Ag]diss) and by forming AgNP-EPS complex. The FTIR spectra further showed that the amide, carboxyl, and phosphoryl functional groups of EPS were involved in binding with AgNP and/or Ag(+). All these processes worked simultaneously to reduce AgNP bioavailability, and subsequently mitigate AgNP toxicity. These findings highlight the importance of EPS in AgNP biogeochemistry in the terrestrial environment. EPS could be highly useful in developing strategies to counteract the phytotoxicty of metal-based nanoparticles in crops.

Diazotrophs-assisted phytoremediation of heavy metals: a novel approach

Heavy metals, which have severe toxic effects on plants, animals, and human health, are serious pollutants of the modern world. Remediation of heavy metal pollution is utmost necessary. Among different approaches used for such remediation, phytoremediation is an emerging technology. Research is in progress to enhance the efficiency of this plant-based technology. In this regard, the role of rhizospheric and symbiotic microorganisms is important. It was assessed by enumeration of data from the current studies that efficiency of phytoremediation can be enhanced by assisting with diazotrophs. These bacteria are very beneficial because they bring metals to more bioavailable form by the processes of methylation, chelation, leaching, and redox reactions and the production of siderophores. Diazotrophs also posses growth-promoting traits including nitrogen fixation, phosphorous solubilization, phytohormones synthesis, siderophore production, and synthesis of ACC-deaminase which may facilitate plant growth and increase plant biomass, in turn facilitating phytoremediation technology. Thus, the aim of this review is to highlight the potential of diazotrophs in assisting phytoremediation of heavy metals in contaminated soils. The novel current assessment of literature suggests the winning combination of diazotroph with phytoremediation technology.

Extracellular polymeric substances of bacteria and their potential environmental applications

Biopolymers are considered a potential alternative to conventional chemical polymers because of their ease of biodegradability, high efficiency, non-toxicity and non-secondary pollution. Recently, extracellular polymeric substances (EPS, biopolymers produced by the microorganisms) have been recognised by many researchers as a potential flocculent for their applications in various water, wastewater and sludge treatment processes. In this context, literature information on EPS is widely dispersed and is very scarce. Thus, this review marginalizes various studies conducted so far about EPS nature-production-recovery, properties, environmental applications and moreover, critically examines future research needs and advanced application prospective of the EPS. One of the most important aspect of chemical composition and structural details of different moieties of EPS in terms of carbohydrates, proteins, extracellular DNA, lipid and surfactants and humic substances are described. These chemical characteristics of EPS in relation to formation and properties of microbial aggregates as well as degradation of EPS in the matrix (biomass, flocs etc) are analyzed. The important engineering properties (based on structural characteristics) such as adsorption, biodegradability, hydrophilicity/hydrophobicity of EPS matrix are also discussed in details. Different aspects of EPS production process such as bacterial strain maintenance; inoculum and factors affecting EPS production were presented. The important factors affecting EPS production include growth phase, carbon and nitrogen sources and their ratio, role of other nutrients (phosphorus, micronutrients/trace elements, and vitamins), impact of pH, temperature, metals, aerobic versus anaerobic conditions and pure and mixed culture. The production of EPS in high concentration with high productivity is essential due to economic reasons. Therefore, the knowledge about all the aspects of EPS production (listed above) is highly essential to formulate a logical and scientific basis for the research and industrial activities. One of the very important issues in the production/application/biodegradation of EPS is how the EPS is extracted from the matrix or a culture broth. Moreover, EPS matrix available in different forms (crude, loosely bound, tightly bound, slime, capsular and purified) can be used as a bioflocculant material. Several chemical and physical methods for the extraction of EPS (crude form or purified form) from different sources have been analyzed and reported. There is ample information available in the literature about various EPS extraction methods. Flocculability, dewaterability and biosorption ability are the very attractive engineering properties of the EPS matrix. Recent information on important aspects of these properties qualitatively as well as quantitatively has been described. Recent information on the mechanism of flocculation mediated by EPS is presented. Potential role of EPS in sludge dewatering and biosorption phenomenon has been discussed in details. Different factors influencing the EPS ability to flocculate and dewaterability of different suspensions have been included. The factors considered for the discussion are cations, different forms of EPS, concentration of EPS, protein and carbohydrate content of EPS, molecular weight of EPS, pH of the suspension, temperature etc. These factors were selected for the study based upon their role in the flocculation and dewatering mechanism as well the most recent available literature findings on these factors. For example, only recently it has been demonstrated that there is an optimum EPS concentration for sludge flocculation/dewatering. High or low concentration of EPS can lead to destabilization of flocs. Role of EPS in environmental applications such as water treatment, wastewater flocculation and settling, colour removal from wastewater, sludge dewatering, metal removal and recovery, removal of toxic organic compounds, landfill leachate treatment, soil remediation and reclamation has been presented based on the most recent available information. However, data available on environmental application of EPS are very limited. Investigations are required for exploring the potential of field applications of EPS. Finally, the limitations in the knowledge gap are outlined and the research needs as well as future perspectives are highlighted.

Characterization of exopolymeric substances from selected Rhodopseudomonas palustris strains and their ability to adsorb sodium ions

Removal of Na(+) by binding with exopolymeric substances (EPS) from Rhodopseudomonas palustris TN114 and PP803 was investigated. The moderate negative correlation pairs (rp) between remaining Alcian blue and amount of Na(+) adsorbed on EPS from strains TN114 and PP803 were -0.652 and -0.609. Both strains showed positive relationships between the amounts of EPS produced and bacterial growth. EPS from strain PP803 had a higher efficiency in removing Na(+) than the EPS from strain TN114 based on their EC50 values (1.79 and 1.49 mg/mL for TN114 and PP803, respectively). The principal component from EPS of strain PP803 which was responsible for salt removal was purified and it was identified as a polysaccharide (≈18 kDa) mainly composed of galacturonic acid. Overall results suggested that EPS is a key factor that our strains used to bind Na(+) allowing their survival in high NaCl concentrations.

Insight into the roles of microbial extracellular polymer substances in metal biosorption

Biosorption presents a potent technology to remediate metal-contaminated aqueous environment or even to recover precious metals. Extracellular polymeric substances (EPS) are believed to play an important role in metal biosorption by microorganisms, but the reported results have been rather contradictory and the underlying mechanisms remain largely unclear so far. This review aims to clarify why large discrepancies existed for different EPS-metal systems through systematically exploring into the adsorption mechanisms and influential factors, and to offer some implications for advancing the implementation of metal biosorption technologies. The state-of-the-art methodologies for characterizing metal-EPS binding are summarized; several interaction mechanisms, including ion exchange, complexation and surface precipitation, are analyzed; the major influential factors such as EPS composition, metal species, solution chemistry and operating conditions are discussed; and lastly future research needs to advance the investigations and implementations of such biosorption processes are proposed.

Influence of copper nanoparticles on the physical-chemical properties of activated sludge

The physical-chemical properties of activated sludge, such as flocculating ability, hydrophobicity, surface charge, settleability, dewaterability and bacteria extracellular polymer substances (EPS), play vital roles in the normal operation of wastewater treatment plants (WWTPs). The nanoparticles released from commercial products will enter WWTPs and can induce potential adverse effects on activated sludge. This paper focused on the effects of copper nanoparticles (CuNPs) on these specific physical-chemical properties of activated sludge. It was found that most of these properties were unaffected by the exposure to lower CuNPs concentration (5 ppm), but different observation were made at higher CuNPs concentrations (30 and 50 ppm). At the higher CuNPs concentrations, the sludge surface charge increased and the hydrophobicity decreased, which were attributed to more Cu²⁺ ions released from the CuNPs. The carbohydrate content of EPS was enhanced to defense the toxicity of CuNPs. The flocculating ability was found to be deteriorated due to the increased cell surface charge, the decreased hydrophobicity, and the damaged cell membrane. The worsened flocculating ability made the sludge flocs more dispersed, which further increased the toxicity of the CuNPs by increasing the availability of the CuNPs to the bacteria present in the sludge. Further investigation indicated that the phosphorus removal efficiency decreased at higher CuNPs concentrations, which was consistent with the deteriorated physical-chemical properties of activated sludge. It seems that the physical-chemical properties can be used as an indicator for determining CuNPs toxicity to the bacteria in activated sludge. This work is important because bacteria toxicity effects to the activated sludge caused by nanoparticles may lead to the deteriorated treatment efficiency of wastewater treatment, and it is therefore necessary to find an easy way to indicate this toxicity.

Extracellular polymeric substances from copper-tolerance Sinorhizobium meliloti immobilize Cu²⁺

The copper tolerance gene of wild-type heavy metal-tolerance Sinorhizobium meliloti CCNWSX0020 was mutated by transposon Tn5-a. The mutant was sensitive up to 1.4mM Cu(2+). Production, components, surface morphology, and functional groups of extracellular polymeric substances (EPS) of the wild-type strains were compared with sensitive mutant in immobilization of Cu(2+). EPS produced by S. meliloti CCNWSX0020 restricts uptake of Cu(2+). The cell wall EPS were categorized based on the compactness and fastness: soluble EPS (S-EPS), loosely bound EPS (LB-EPS), and tightly bound EPS (TB-EPS). LB-EPS played a more important role than S-EPS and TB-EPS in Cu(2+) immobilization. Scanning electron microscopy (SEM) analysis LB-EPS had rough surface and many honeycomb pores, making them conducive to copper entry; therefore, they may play a role as a microbial protective barrier. Fourier transform-infrared (FT-IR) analysis further confirm that proteins and carbohydrates were the main extracellular compounds which had functional groups such as carboxyl (COOH), hydroxyl (OH), and amide (NH), primarily involved in metal ion binding.

Abiotic reduction of 1,3-dinitrobenzene by aqueous dissolved extracellular polymeric substances produced by microorganisms

Extracellular polymeric substances (EPS) secreted by microorganisms make up an important constituent of labile and semilabile dissolved organic matter in surface water. There are no literature reports on the capability of EPS to reduce organic pollutants. This study demonstrated that EPS could effectively reduce a probe nitroaromatic compound, 1,3-dinitrobenzene. In aqueous dissolved EPS (60.3 mg L, produced by ), 1,3-dinitrobenzene (2.1 mg L) was completely reduced to 3-hydroxylaminonitrobenzene and 3-nitroaniline within 45 h (30°C; pH 5.6). The reduction of 1,3-dinitrobenzene followed pseudo-first-order kinetics (rate constant [], 4.3 × 10 h). Fourier transform infrared and C nuclear magnetic resonance spectroscopy analyses combined with Tollen's test suggest that hemiacetal of rhamnose structures and reduced phenolic groups in EPS acted as the reducing agents. The abiotic nature of the reaction was further verified by the electrochemical cell experiments where the measured quantity of electron transfer through the external circuit was in principle equal to the stoichiometric demand to reduce 1,3-dinitrobenzene. The reduction of 1,3-dinitrobenzene by EPS was markedly facilitated by the addition of model juglone (1 mg L), confirming the "electron shuttle" role of quinoid-like structures in EPS. Moreover, the reaction was dependent on the pH and the concentration of metal ions (Na, Zn, or Cu). Additional tests confirmed the universality of 1,3-dinitrobenzene reduction by other sources of EPS (, , , and natural freshwater biofilm). The results indicate that EPS are reductively labile and can contribute to the natural attenuation and remediation of environmental organic contaminants.

Metal binding properties of extracellular polymeric substances extracted from anaerobic granular sludges

Extracellular polymeric substances (EPS) were extracted from four anaerobic granular sludges with different procedures to study their involvement in biosorption of metallic elements. EPS extracts are composed of closely associated organic and mineral fractions. The EPS macromolecules (proteins, polysaccharides, humic-like substances, nucleic, and uronic acids) have functional groups potentially available for the binding of metallic elements. The acidic constants of these ionizable groups are: pKa1 (4-5) corresponding to the carboxyl groups; pKa2 (6-7) corresponding to the phosphoric groups; pKa3 (8-10) and pKa4 (≈10) corresponding to the phenolic, hydroxyl, and amino groups. The polarographic study confirms the higher affinity of the EPS to bind to lead than to cadmium. Moreover, the binding of these metallic compounds with the EPS is a mix of several sorption mechanisms including surface complexation, ion exchange, and flocculation. Inorganic elements were found as ions linked to organic molecules or as solid particles. The mineral fraction affects the binding properties of the EPS, as the presence of salts decreases the EPS binding ability. Calcite and apatite particles observed on SEM images of EPS extracts can also sorb metallic elements through ion exchange or surface complexation.

Impacts of silver nanoparticles on cellular and transcriptional activity of nitrogen-cycling bacteria

The widespread use of silver nanoparticles (AgNPs) raises the potential for environmental releases that could impact microbial ecosystem services. In the present study, the authors address how the AgNPs and Ag(+) that they release may impact nitrogen-cycling bacteria. The authors studied the cellular and transcriptional response of the denitrifier Pseudomonas stutzeri, the nitrogen fixer Azotobacter vinelandii, and the nitrifier Nitrosomonas europaea exposed to 35 nm (carbon-coated) AgNPs or to Ag(+) (added as AgNO3 ). Based on minimum inhibitory concentrations (MICs), Ag(+) was 20 times to 48 times more toxic to the tested strains than AgNPs (including Ag(+) released during exposure). Exposure to sublethal concentrations of AgNPs or Ag(+) (representing 10% of the respective MIC for AgNO3 ) resulted in no significant effect on the expression of the denitrifying genes narG, napB, nirH, and norB in P. stutzeri or the nitrogen-fixing genes nifD, nifH, vnfD, and anfD in A. vinelandii, whereas nitrifying genes (amoA1 and amoC2) in N. europaea were upregulated (2.1- to 3.3-fold). This stimulatory effect disappeared at higher silver concentrations (60% of the Ag(+) MIC), and toxicity was exerted at concentrations higher than 60% of the Ag(+) MIC. The MIC for N. europaea was 8 times to 24 times lower than for the other strains, indicating higher susceptibility to AgNPs. This was corroborated by the lower half-lethal concentration for N. europaea (87 µg/L) compared with P. stutzeri (124 µg/L) and A. vinelandii (>250 µg/L) when cells were exposed with Ag(+) for 24 h in 1 mM bicarbonate buffer. This suggests that ammonia oxidation would be the most vulnerable nitrogen-cycling process in wastewater treatment plants receiving AgNPs and in agricultural soils amended with biosolids that concentrate them.

Impact of Azotobacter exopolysaccharides on sustainable agriculture

Recently, increasing attention have lead to search other avenue of biofertilizers with multipurpose activities as a manner of sustainable soil health to improve the plant productivity. Azotobacter have been universally accepted as a major inoculum used in biofertilizer to restore the nitrogen level into cultivated field. Azotobacter is well characterized for their profuse production of exopolysaccharides (EPS). Several reviews on biogenesis and multifunctional role of Azotobacter EPS have been documented with special emphasis on industrial applications. But the impact of Azotobacter EPS in plant growth promotion has not received adequate attention. This review outlines the evidence that demonstrates not only the contribution of Azotobacter EPS in global nutrient cycle but also help to compete successfully in different adverse ecological and edaphic conditions. This also focuses on new insights and concepts of Azotobacter EPS which have positive effects caused by the biofilm formation on overall plant growth promotion with other PGPRs. In addition, their potentials in agricultural improvement are also discussed. Recent data realized that Azotobacter EPS have an immense agro-economical importance including the survivability and maintenance of microbial community in their habitat. This leads us to confirm that the next generation Azotobacter inoculum with high yielding EPS and high nitrogen fixing ability can be utilized to satisfy the future demand of augmented crop production attributed to increase plant growth promoting agents.

Perspectives of plant-associated microbes in heavy metal phytoremediation

"Phytoremediation" know-how to do-how is rapidly expanding and is being commercialized by harnessing the phyto-microbial diversity. This technology employs biodiversity to remove/contain pollutants from the air, soil and water. In recent years, there has been a considerable knowledge explosion in understanding plant-microbes-heavy metals interactions. Novel applications of plant-associated microbes have opened up promising areas of research in the field of phytoremediation technology. Various metabolites (e.g., 1-aminocyclopropane-1-carboxylic acid deaminase, indole-3-acetic acid, siderophores, organic acids, etc.) produced by plant-associated microbes (e.g., plant growth promoting bacteria, mycorrhizae) have been proposed to be involved in many biogeochemical processes operating in the rhizosphere. The salient functions include nutrient acquisition, cell elongation, metal detoxification and alleviation of biotic/abiotic stress in plants. Rhizosphere microbes accelerate metal mobility, or immobilization. Plants and associated microbes release inorganic and organic compounds possessing acidifying, chelating and/or reductive power. These functions are implicated to play an essential role in plant metal uptake. Overall the plant-associated beneficial microbes enhance the efficiency of phytoremediation process directly by altering the metal accumulation in plant tissues and indirectly by promoting the shoot and root biomass production. The present work aims to provide a comprehensive review of some of the promising processes mediated by plant-associated microbes and to illustrate how such processes influence heavy metal uptake through various biogeochemical processes including translocation, transformation, chelation, immobilization, solubilization, precipitation, volatilization and complexation of heavy metals ultimately facilitating phytoremediation.

Optimization of production of extracellular polymeric substances by Arthrobacter viscosus and their interaction with a 13X zeolite for the biosorption of Cr(VI)

In this work we aimed to optimize the production of extracellular polymeric substances (EPS) by an Arthrobacter viscosus biofilm supported on 13X zeolite to be used in the biosorption of Cr(VI). The optimization parameters were agitation rate, work volume, pH and glucose concentration. Following the optimization of EPS production, the biofilm was used in the biosorption of hexavalent Cr from liquid solutions. Differences between the use of dead or active biomass and between the performance of zeolite in powder or in pellet form were also studied. The optimized EPS production allowed values of metal uptake between 2.72 mg/g(biosorbent) and 7.88 mg/g(biosorbent) for initial Cr(VI) concentrations of 20-60 mg/L. For an initial concentration of 20 mg/L, the optimal conditions of EPS production allowed an increase of 10% on the removal percentage of total Cr, and the use of zeolite as a powder rather than the pelleted form produced an increase of 46.5% in the removal percentage. For the initial concentration of 60 mg/L, the use of active biomass compared to dried biomass allowed a reduction of the time required for the total removal of Cr(VI) from 20 to 13 days.

Physical and ecological controls on freshwater floc trace metal dynamics

Significantly higher concentrations of Ag, As, Cu, Co, Ni, and Pb are found in suspended floc compared to surficial bed sediments for a freshwater beach in Lake Ontario. Contrasting observed element-specific bed sediment metal partitioning patterns, floc sequestration for all elements is dominated by one substrate: amorphous oxyhydroxides. More specifically, floc metal scavenging is controlled by floc biogeochemical architecture. Floc organics, largely living microbial cells and associated exopolymeric substances (EPS), act as scaffolds for the collection and/or templating of amorphous Fe oxyhydroxides. While interactions between floc organics and amorphous Fe oxyhydroxides affected floc sorption behavior, specific element affinities and competition for these limited substrates was important for overall floc partitioning. Further, assessment of metal dynamics during stormy conditions indicated energy-regime driven shifts in floc and bed sediment partitioning that were specifically linked to the exchange of floc and bed sedimentary materials. These novel results demonstrate that the microbial nature of floc formation exerts an important control on floc metal dynamics distinguishable from surficial bed sediments and that hydrologic energy-regime is an important factor to consider in overall floc metal behavior, especially in beach environments.

Extracellular polymeric substances from Shewanella sp. HRCR-1 biofilms: characterization by infrared spectroscopy and proteomics

The composition of extracellular polymeric substances (EPS) from Shewanella sp. HRCR-1 biofilms was investigated using infrared spectroscopy and proteomics to provide insight into potential ecophysiological functions and redox activity of the EPS. Both bound and loosely associated EPS were extracted from Shewanella sp. HRCR-1 biofilms prepared using a hollow-fibre membrane biofilm reactor. Fourier transform infrared spectra revealed the presence of proteins, polysaccharides, nucleic acids, membrane lipids and fatty acids in the EPS fractions. Using a global proteomic approach, a total of 58 extracellular and outer membrane proteins were identified in the EPS. These included homologues of multiple Shewanella oneidensis MR-1 proteins that potentially contribute to key physiological biofilm processes, such as biofilm-promoting protein BpfA, surface-associated serine protease, nucleotidases (CpdB and UshA), an extracellular lipase, and oligopeptidases (PtrB and a M13 family oligopeptidase lipoprotein). In addition, 20 redox proteins were found in extracted EPS. Among the detected redox proteins were the homologues of two S. oneidensis MR-1 c-type cytochromes, MtrC and OmcA, which have been implicated in extracellular electron transfer. Given their detection in the EPS of Shewanella sp. HRCR-1 biofilms, c-type cytochromes may contribute to the possible redox activity of the biofilm matrix and play important roles in extracellular electron transfer reactions.

Phytoprotective influence of bacteria on growth and cadmium accumulation in the aquatic plant Lemna minor

Certain plants are known to accumulate heavy metals, and can be used in remediation of polluted soil or water. Plant-associated bacteria, especially those that are metal tolerant, may enhance the total amount of metal accumulated by the plant, but this process is still unclear. In this study, we investigated metal enhancement vs. exclusion by plants, and the phytoprotective role plant-associated bacteria might provide to plants exposed to heavy metal. We isolated cadmium-tolerant bacteria from the roots of the aquatic plant Lemna minor grown in heavy metal-polluted waters, and tested these isolates for tolerance to cadmium. The efficiency of plants to accumulate heavy metal from their surrounding environment was then tested by comparing L. minor plants grown with added metal tolerant bacteria to plants grown axenically to determine, whether bacteria associated with these plants increase metal accumulation in the plant. Unexpectedly, cadmium tolerance was not seen in all bacterial isolates that had been exposed to cadmium. Axenic plants accumulated slightly more cadmium than plants inoculated with bacterial isolates. Certain isolates promoted root growth, but overall, addition of bacterial strains did not enhance plant cadmium uptake, and in some cases, inhibited cadmium accumulation by plants. This suggests that bacteria serve a phytoprotective role in their relationship with Lemna minor, preventing toxic cadmium from entering plants.