High internal phase emulsion templates solely stabilised by functionalised titania nanoparticles

Preparation of Macroporous Polymers from Microcapsule-Stabilized Pickering High Internal Phase Emulsions

The ability to make stable water-in-oil (W/O) Pickering high internal phase emulsions (HIPEs) is demonstrated using microcapsules as a stabilizer. The microcapsules are prepared with glycidyl methacrylate (GMA) and poly(melamine-formaldehyde) (PMF) as core and wall materials, respectively. Using these GMA-loaded PMF-walled microcapsules as a sole stabilizer of water-in-styrene/divinylbenzene HIPE, the polymerization of this HIPE causes a closed-cell porous polymer. While with the addition of a certain amount of the nonionic surfactant Span80 to the microcapsule-stabilized HIPEs, a series of open-cell porous materials are obtained. The morphologies of the porous materials are tunable with changing the microcapsules content and/or surfactant amount in the HIPE templates. When Raft polymerization is introduced to cure these HIPEs, owing to both the self-healing agent GMA within the microcapsules and the residue of the chain-transfer agent from Raft polymerization of HIPEs, the resulting porous polymers are proved to be self-repairable. This work suggests a new type of Pickering HIPE and provides a novel idea for preparing self-healing porous materials.

Templating Interfacial Nanoparticle Assemblies via in Situ Techniques

In situ surface modification of nanoparticles has a rich industrial history, but in recent years, it has also received increased attention in the field of directed self-assembly. In situ techniques rely on components within a Pickering emulsion system, such as amphiphiles that act as hydrophobizers or ionic species that screen charges, to drive the interfacial assembly of particles. Instead of stepwise procedures to chemically tune the particle wettability, in situ methods use elements already present within the system to alter the nanoparticle interfacial behavior, often depending on Coulombic interactions to simplify operations. The surface modifications are not contingent on specific chemical reactions, which further enables a multitude of possible nanoparticles to be used within a given system. In recent studies, in situ methods have been combined with external means of shaping the interface to produce materials with high interfacial areas and complex geometries. These systems have facilely tunable properties, enabling their use in an extensive array of applications. In this feature article, in honor of the late Prof. Helmuth Möhwald, we review how in situ techniques have influenced the development of soft, advanced materials, covering the fundamental interfacial phenomena with an outlook on materials science.

Fabrication and Characterization of Novel Water-Insoluble Protein Porous Materials Derived from Pickering High Internal-Phase Emulsions Stabilized by Gliadin-Chitosan-Complex Particles

Pickering high internal-phase emulsions (HIPEs) and porous materials derived from the Pickering HIPEs have received increased attention in various research fields. Nevertheless, nondegradable inorganic and synthetic stabilizers present toxicity risks, thus greatly limiting their wider applications. In this work, we successfully developed nontoxic porous materials through the Pickering HIPE-templating process without chemical reactions. The obtained porous materials exhibited appreciable absorption capacity to corn oil and reached the state of saturated absorption within 3 min. The Pickering HIPE templates were stabilized by gliadin-chitosan complex particles (GCCPs), in which the volume fraction of the dispersed phase (90%) was the highest of all reported food-grade-particle-stabilized Pickering HIPEs so far, further contributing to the interconnected pore structure and high porosity (>90%) of porous materials. The interfacial particle barrier (Pickering mechanism) and three-dimensional network formed by the GCCPs in the continuous phase play crucial roles in stabilization of HIPEs with viscoelastic and self-supporting attributes and also facilitate the development of porous materials with designed pore structure. These materials, with favorable biocompatibility and biodegradability, possess excellent application prospects in foods, pharmaceuticals, materials, environmental applications, and so on.

Effect of shearing stress on the radial heterogeneity and chromatographic performance of styrene-based polymerised high internal phase emulsions prepared in capillary format

Poly(styrene-co-divinylbenzene) monoliths were prepared from the polymerisation of water-in-monomer high internal phase emulsions consisting of a 90 vol% internal phase and stabilised by the non-ionic surfactant Span 80®. The materials were prepared in capillary housings of various internal diameters ranging from 150 μm to 540 μm by simply passing the emulsion through the capillaries. When low shear (300 rpm) was used for emulsification, the droplet and resulting void size distributions were observed to shift towards lower values when the emulsions were forced through capillaries of internal diameter less than 540 μm and all columns exhibited significant radial heterogeneity. When high shear was employed (14 000 rpm) the resulting emulsions preserved their structure when forced through these capillaries and possessed narrower void size distributions with no obvious radial heterogeneity observed upon curing. This resulted in significantly improved chromatographic performance for the separation of a standard mixture of proteins when compared to the materials prepared under low shear.

High Internal Phase Emulsion Gels Stabilized by Natural Casein peptides

The surface and interfacial properties of casein-hydrolyzed peptides were evaluated using measurement of surface and interfacial tensions, surface viscosity, dynamic light scattering (DLS), and freeze-fracture transmission electron microscopy (FF-TEM). In this study, high internal oil phase emulsion (HIPE) gels were successfully prepared, using the surface and interfacial properties of casein peptides. The casein peptides exhibited surface and interfacial activities. The estimated critical micelle concentration (CMC) and γ_CMC values were 3.0 mg/mL and 47.8 mN/m, and the average size of casein peptide micelles was 13.2 ± 1.7 nm. The surface shear viscosity of an aqueous casein peptide solution at 10 mg/mL was 1603 µPa ms, which is fifteen times larger than that of sodium dodecyl sulfate (SDS, 106 µPa ms). The larger surface viscosity of casein peptide adsorbed layer could stabilize emulsions and prevent flocculation and coalescence. High internal oil phase gel emulsions were then prepared by slowly adding oil and polyisobutene into an aqueous casein peptide solution/glycerol mixture with different compositions. Based on the pseudo ternary 15 wt% aqueous casein peptide solution/polyisobutene/glycerol phase diagram, the HIPE containing the maximum 88.1 wt% (91.5 vol%) of oil is obtained by the addition of 0.36 wt% of casein peptides. The use of only a small amount of protein-hydrolyzed peptides instead of the commonly used synthetic surfactants for HIPE preparation has great advantages for the widespread application of HIPE technology.

Development of antioxidant gliadin particle stabilized Pickering high internal phase emulsions (HIPEs) as oral delivery systems and the in vitro digestion fate

In this paper, we demonstrate for the first time the use of gliadin particles to structure algal oil (rich in DHA) and to exert chemical stability against lipid oxidation via the Pickering high internal phase emulsion (HIPE) strategy.

Toward Maximizing the Mechanical Property of Interconnected Macroporous Polystyrenes Made from High Internal Phase Emulsions

Macroporous materials polymerized from high internal phase emulsions (PolyHIPEs) possess well-defined interconnected porous structures and tunable device shapes. This provides interesting property characteristics well-suited for a variety of applications. However, such materials also demonstrate poor mechanical performances, which limit their potential use. As will be demonstrated, this results from the high surfactant content required by PolyHIPEs. Herein, a new approach is introduced for designing a highly efficient polymeric surfactant, which generates interconnected pores in PolyHIPEs through designing an incompatible surfactant and skeleton material. The surfactant also possesses a hyperbranched topology, which combines the strong amphipathy of small molecular surfactants and the nanosphere structure of Pickering emulsifiers to provide an excellent colloidal stability to HIPEs. A hyperbranched polyethylene having pendant sodium sulfonate groups (HBPE-SO₃Na) was thus designed and synthesized via chain walking copolymerization of ethylene and 2-trimethylsilyloxyethyl acrylate followed by sulfonation. Stable HIPEs of styrene/divinylbenzene and water at a weight ratio of 1 to 5 were obtained with using HBPE-SO₃Na. The polymerization of HIPEs produced interconnected macroporous polystyrenes (PSs) at a substantially lower surfactant content, for example, 0.5 wt % HBPE-SO₃Na. The compressive Young's moduli of PolyHIPEs reached 104-111 MPa with 0.5-2 wt % HBPE-SO₃Na, which is the first reported case of a PS-based PolyHIPE achieving its theoretical modulus. The PolyHIPE was used to support Au nanoparticles and embed in a column for oxidation of dimethylphenylsilane. A complete conversion of dimethylphenylsilanol was achieved with low column back pressure in a 50 h continuous reaction with no degradation of PolyHIPE integrity and mechanical property.

Development of stable Pickering emulsions/oil powders and Pickering HIPEs stabilized by gliadin/chitosan complex particles

In this paper, we demonstrate the use of gliadin/chitosan complex particles (GCCPs) as particulate stabilizers of oil-in-water emulsions of natural oils and water. For this purpose, we fabricated GCCPs through a facile anti-solvent procedure and demonstrated their usage in the formation of Pickering emulsions and Pickering high internal phase emulsions (HIPEs). The GCCPs can be used to produce surfactant-free o/w Pickering emulsions and Pickering HIPEs; unfortunately these emulsions were labile to coalescence. NaCl addition and/or pH regulation, and the combination were used to modify the surface wettability of the complex particles to achieve stable emulsions. The microstructures, e.g., interfacial frameworks, GCCP partition between the continuous phase and interfacial region, and the state of the droplets, of Pickering emulsions were visualized by confocal laser scanning microscopy (CLSM), confirming that the inclusion of NaCl and slightly adjusting pH toward 4.0 and/or 5.0 benefited the adsorption and accumulation of colloid particles at the droplet surface to form an engineered interfacial structure, bridging droplets together through a percolating layer of colloidal particles at the oil/water interface. A schematic representation for the formation route of the emulsions is proposed to relate the physical performance and rheological property with the interfacial structures and aggregate behaviors in the Pickering system stabilized by the complex particles. Interestingly, direct freeze-drying of the emulsions transformed unstable Pickering emulsions into stable oil powders. This study opens a promising route based on Pickering HIPEs or oil powders to structure liquid oils into solid-like fats without artificial trans-fat, which outlines new directions for future fundamental research.

Porous Polystyrene Monoliths and Microparticles Prepared from Core Cross-linked Star (CCS) Polymers-Stabilized Emulsions

A hydrophobic CCS polymer of poly(benzyl methacrylate) (PBzMA) was prepared in toluene by reversible addition-fragmentation chain transfer (RAFT)-mediated dispersion polymerization. The CCS polymer, with poly(benzyl methacrylate) as the arm and crosslinked N, N′-bis(acryloyl)cystamine (BAC) as the core, was confirmed by characterization with gel permeation chromatography (GPC) and nuclear magnetic resonance (NMR) spectroscopy. Three kinds of oils (toluene, anisole and styrene) were chosen to study the emulsification properties of PBzMA CCS polymer. The oils can be emulsified by CCS polymer to form water-in-oil (w/o) emulsions. Moreover, w/o high internal phase emulsions (HIPEs) can be obtained with the increase of toluene and styrene volume fractions from 75% to 80%. Porous polystyrene monolith and microparticles were prepared from the emulsion templates and characterized by the scanning electronic microscopy (SEM). With the internal phase volume fraction increased, open-pore porous monolith was obtained.

Polyvinyl alcohol-based hydrophilic monoliths from water-in-oil high internal phase emulsion template

Herein, we report a new approach to fabricate polyvinyl alcohol (PVA) based hydrophilic monoliths by alcoholysis of porous emulsion-templated polyvinyl acetate (PVAc). The precursory PVAc-based monolith is obtained by polymerization of a W/O high internal phase emulsion (HIPE) containing vinyl acetate as the external phase while water as the internal phase. As an alcoholysis-stable tri-functional commonomer, triallyl isocyanurate is chosen as the crosslinking agent to prevent possible collapse of the polymeric skeleton and the consequent losses in mechanical properties during the alcoholysis step. By alcoholysis of the resulting PVAc-based monolith, the PVA-based monoliths are successful prepared as confirmed by FTIR analysis. BET analysis and SEM observation confirm the formation of open-cell and highly interconnected porous structures of PVA-based monoliths with surface areas of around 16m²/g. Stemming from the intrinsic hydrophilicity of hydroxyl and morphology, PVA-based monoliths exhibit great enhancement in hydrophilicity with a much lower water contact angles than that of PVAc-based monoliths.

Interconnected macroporous 3D scaffolds templated from gelatin nanoparticle-stabilized high internal phase emulsions for biomedical applications

Here we report on the successful preparation of open-cellular macroporous 3D scaffolds templated from gelatin nanoparticle-stabilized HIPEs with acrylamide (AM) as the monomer in the continuous phase. Tuning the gelatin nanoparticle concentration or AM content led to different porous structures with void diameters varying between 30 and 78 μm. More importantly, keeping HIPEs at room temperature to undergo a limited kinetic coarsening before polymerization could greatly improve the interconnectivity and pore size of the scaffolds, with the average diameters (approx. 118 μm) being enlarged 1.5-fold. Additionally, the scaffolds had a character of soft tissue with compressive modulus more than 150 kPa. The cell culture assay confirmed that HepG2 cells not only could adsorb on but also were grown inside the scaffolds, representing a characteristic of the good biocompatibility of the scaffolds. Our work suggests that the 3D scaffolds fabricated from gelatin nanoparticle-stabilized HIPE templates are promising culture substrates for a wide range of applications in the biomedical field.

High internal phase emulsions stabilised by supramolecular cellulose nanocrystals and their application as cell-adhesive macroporous hydrogel monoliths

Nanosized celluloses are attractive building blocks to generate hierarchically advanced materials and have been gradually explored in emulsion applications. Here we report a high internal phase emulsion (HIPE) prepared by using supramolecular cellulose nanocrystals (CNCs) as Pickering stabilisers via one-step emulsification, and interconnected macroporous hybrid hydrogels were produced by utilizing this HIPE as a template. A quadruple hydrogen bonding moiety 2-ureido-4[1H]-pyrimidone (UPy) was firstly grafted onto the surface of cellulose nanocrystals through simple free radical polymerization. The polymer grafting was confirmed by elemental analysis and thermogravimetry. The UPy modified CNCs (CNC-UPy) exhibited superior emulsion stabilising ability compared to the pristine CNCs, and the oil-in-water emulsions with an internal phase volume ratio of 80% showed good long-term stability. The properties of resulting macroporous polyHIPE hydrogels, such as swelling behaviours, porous structures and mechanical strength, were investigated on the dependence of CNC-UPy concentrations. In addition, the macroporous hybrid hydrogel exhibits excellent cytocompatibility and cell adhesion as demonstrated by mouse bone mesenchymal stem cell (mBMSC) culture. With these promising properties, the developed hydrogels demonstrate great potential as active biological scaffolds for tissue engineering.

Controlling the Rheology of Montmorillonite Stabilized Oil-in-Water Emulsions

The rheology of hexadecane-in-water emulsions stabilized by montmorillonite platelets was investigated. In these systems excess particles form a network in the continuous phase which strongly dictates their rheological behavior. The emulsions were modified by the addition of NaCl and Na₄P₂O₇ to the continuous phase at varying concentrations. Remarkably, changes of up to 3 orders of magnitude in elastic modulus and yield stress of the emulsions were achieved. The droplets retained long-term coalescence stability after the addition of NaCl or Na₄P₂O₇ and even after the removal of the continuous phase network. The latter finding shows that the droplets are primarily stabilized by the formation of a solid barrier at the interface. These emulsions are therefore highly versatile formulation materials with an exceptional degree of stability and tunability.

Processable high internal phase Pickering emulsions using depletion attraction

High internal phase emulsions have been widely used as templates for various porous materials, but special strategies are required to form, in particular, particle-covered ones that have been more difficult to obtain. Here, we report a versatile strategy to produce a stable high internal phase Pickering emulsion by exploiting a depletion interaction between an emulsion droplet and a particle using water-soluble polymers as a depletant. This attractive interaction facilitating the adsorption of particles onto the droplet interface and simultaneously suppressing desorption once adsorbed. This technique can be universally applied to nearly any kind of particle to stabilize an interface with the help of various non- or weakly adsorbing polymers as a depletant, which can be solidified to provide porous materials for many applications.

Monodisperse polystyrene foams via polymerization of foamed emulsions: structure and mechanical properties

A study on how to control the pore size of polystyrene foams generated from foamed emulsion templates and their mechanical properties.

Deep-Eutectic Solvents as MWCNT Delivery Vehicles in the Synthesis of Functional Poly(HIPE) Nanocomposites for Applications as Selective Sorbents

We report an alternative green strategy based on deep-eutectic solvents (DES) to deliver multiwalled carbon nanotubes (MWCNTs) for a bottom-up approach that allows for the selective interfacial functionalization of nonaqueous poly(high internal phase emulsions), poly(HIPEs). The formation and polymerization of methacrylic and styrenic HIPEs were possible through stabilization with nitrogen doped carbon nanotube (CN_X) and surfactant mixtures using a urea-choline chloride DES as a delivering phase. Subtle changes in CN_X concentration (less than 0.2 wt % to the internal phase) produced important changes in the macroporous monolith functionalization, which in turn led to increased monolith hydrophobicity and pore openness. These materials displayed great oleophilicity with water contact angles as high as 140° making them apt for biodiesel, diesel, and gasoline fuel sorption applications. Overall, styrene divinylbenzene (StDvB) based poly(HIPEs) showed hydrophobicity and fuel sorption capacities as high as 4.8 (g/g). Pore hierarchy, namely pore openness, regulated sorption capacity, and sorption times where greater openness resulted in faster sorption and increased sorption capacity. Monoliths were subject to 20 sorption-desorption cycles demonstrating recyclability and stable sorption capacity. Finally, CN_X/surfactant hybrids made it possible to reduce surfactant requirements for successful HIPE formation and stabilization during polymerization. All poly(HIPEs) retained acceptable conversion as a function of CN_X loading nearing 90% or better with thermal stability as high as 283 °C.

High-Surface-Area, Emulsion-Templated Carbon Foams by Activation of polyHIPEs Derived from Pickering Emulsions

Carbon foams displaying hierarchical porosity and excellent surface areas of >1400 m²/g can be produced by the activation of macroporous poly(divinylbenzene). Poly(divinylbenzene) was synthesized from the polymerization of the continuous, but minority, phase of a simple high internal phase Pickering emulsion. By the addition of KOH, chemical activation of the materials is induced during carbonization, producing Pickering-emulsion-templated carbon foams, or carboHIPEs, with tailorable macropore diameters and surface areas almost triple that of those previously reported. The retention of the customizable, macroporous open-cell structure of the poly(divinylbenzene) precursor and the production of a large degree of microporosity during activation leads to tailorable carboHIPEs with excellent surface areas.

Controlling Pickering Emulsion Destabilisation: A Route to Fabricating New Materials by Phase Inversion

The aim of this paper is to review the key findings about how particle-stabilised (or Pickering) emulsions respond to stress and break down. Over the last ten years, new insights have been gained into how particles attached to droplet (and bubble) surfaces alter the destabilisation mechanisms in emulsions. The conditions under which chemical demulsifiers displace, or detach, particles from the interface were established. Mass transfer between drops and the continuous phase was shown to disrupt the layers of particles attached to drop surfaces. The criteria for causing coalescence by applying physical stress (shear or compression) to Pickering emulsions were characterised. These findings are being used to design the structures of materials formed by breaking Pickering emulsions.

Macroporous Polymers with Aligned Microporous Walls from Pickering High Internal Phase Emulsions

A novel class of macroporous polymers, open macroporous polymers with aligned microporous void walls, were prepared by combining particle-stabilized high internal phase emulsion (Pickering HIPE) and unidirectional freezing technique. These Pickering HIPEs were prepared by utilizing poly(urethane urea)/(vinyl ester resin) nanoparticles as the sole stabilizer, and this nanoparticles also acted as building blocks for the resulting macroporous polymers. Moreover, the morphology and compression modulus of the resulting porous materials could be tuned easily. This means now Pickering-HIPE templated open-cell foams can be prepared, and this route was normally achieved with surfactant and/or chemical reaction involved.

Interconnected Porous Polymers with Tunable Pore Throat Size Prepared via Pickering High Internal Phase Emulsions

Interconnected macroporous polymers were prepared by copolymerizing methyl acrylate (MA) via Pickering high internal phase emulsion (HIPE) templates with modified silica particles. The pore structure of the obtained polymer foams was observed by field-emission scanning electron microscopy (FE-SEM). Gas permeability was characterized to evaluate the interconnectivity of macroporous polymers. The polymerization shrinkage of continuous phase tends to form open pores while the solid particles surrounding the droplets act as barriers to produce closed pores. These two conflicting factors are crucial in determining the interconnectivity of macroporous polymers. Thus, poly-Pickering HIPEs with high permeability and well-defined pore structure can be achieved by tuning the MA content, the internal phase fraction, and the content of modified silica particles.

Macrocellular polymer foams from water in oil high internal phase emulsion stabilized solely by polymer Janus nanoparticles: preparation and their application as support for Pd catalyst

Macrocellular polymer foam with open-cell structure was obtained from Pickering HIPE template stabilized solely by polymer Janus nanoparticles.

Functional nanoparticle-decorated graphene oxide sheets as stabilizers for Pickering high internal phase emulsions and graphene oxide based foam monoliths

A facile and versatile approach was developed for the preparation of graphene oxide sheet-based Pickering high internal phase emulsions by nanoparticle decoration.

Phase inversion of ionomer-stabilized emulsions to form high internal phase emulsions (HIPEs)

The phase inversion of ionomer-stabilized emulsions to form high internal phase emulsions can be induced by salt concentration and pH changes.

Synergetic effect based gel-emulsions and their utilization for the template preparation of porous polymeric monoliths

A polymerizable cholesteryl derivative (COA) was synthesized and used as a stabilizer for creating gel-emulsions with water in polymerizable monomers, of which they are styrene (ST), tert-butyl methacrylate (t-BMA), ethylene glycol dimethyl acrylate (EGDMA), and methyl methacrylate (MMA), etc. Interestingly, in addition to COA, the presence of a small amount of Span-80 is a necessity for the formation of the monomers containing gel-emulsions. Unlike conventional ones, the volume fraction of the dispersed phase in the gel-emulsions as created could be much lower than 74%, a critical value for routine gel-emulsions. Stabilization of these gel-emulsions as created has been attributed to the synergetic effect between COA, a typical low-molecular-mass gelator (LMMG), and Span-80, a surfactant, of which the former gels the continuous phase and the latter minimizes the interfacial energy of the continuous phase and the dispersed phase. SEM observation confirmed the network structures of COA in the gel-emulsions. Rheological tests demonstrated that the storage modulus, G', and the yield stress of the gel-emulsions decrease along with increasing the volume fraction of the dispersed phase, water, provided it is not greater than 74%-a result inconsistent with the theory explaining formation of routine gel-emulsions and in support of the conclusion that the systems under study follow a different mechanism. Furthermore, unlike LMMG-based stabilizers reported earlier, the gelator, COA, created in the present study has been functioning not only as a stabilizer but also a monomer. To illustrate the conceptual advantages, the gel-emulsions of water in ST/DVB/AIBN were polymerized. As expected, the densities and internal structures of the monoliths as prepared are highly adjustable, functionalization of the materials with cholesterol has been realized, and at the same time the problem of stabilizer leaking has been avoided. A preliminary test for gas adsorption demonstrated that the monoliths as prepared are good adsorbents for some volatile organic compounds (VOCs), in particular benzene, toluene, ethylbenzene, and xylene-the famous and toxic BTEX. It is believed that the findings reported in the present work provide not only a new strategy for creating novel gel-emulsions but also a new route for functionalizing porous polymeric monoliths.

Macroporous ZnO foams by high internal phase emulsion technique: synthesis and catalytic activity

Zinc(II) oxide nanoparticles were used for the stabilization of dicyclopentadiene (DCPD)-water-based high internal phase emulsions (HIPEs), which were subsequently cured using ring-opening metathesis polymerization (ROMP). The morphology of the resulting ZnO-pDCPD nanocomposite foams was investigated in correlation to the nanoparticle loading and nanoparticle surface chemistry. While hydrophilic ZnO nanoparticles were found to be unsuitable for stabilizing the HIPE, oleic acid coated, yet hydrophobic ZnO nanoparticles were effective HIPE stabilizers, yielding polymer foams with ZnO nanoparticles located predominately at their surface. These inorganic/organic hybrid foam-materials were subsequently calcined at 550 °C for 15 min to obtain inorganic macroporous ZnO foams with a morphology reminiscent to the original hybrid foam, and a specific surface area of 1.5 m(2) g(-1). Longer calcination time (550 °C, 15 h) resulted in a sea urchin like morphology of the ZnO foams, characterized by higher specific surface area of 5.5 m(2) g(-1). The latter foam type showed an appealing catalytic performance in the catalytic wet air oxidation (CWAO) process for the destruction of bisphenol A.