Limonene: a versatile chemical of the bioeconomy

Essential Oils in Citrus Fruit Ripening and Postharvest Quality

Citrus essential oils (EOs) are widely used as flavoring agents in food, pharmaceutical, cosmetical and chemical industries. For this reason, their demand is constantly increasing all over the world. Besides industrial applications, the abundance of EOs in the epicarp is particularly relevant for the quality of citrus fruit. In fact, these compounds represent a natural protection against postharvest deteriorations due to their remarkable antimicrobial, insecticidal and antioxidant activities. Several factors, including genotype, climatic conditions and cultural practices, can influence the assortment and accumulation of EOs in citrus peels. This review is focused on factors influencing variation of the EOs’ composition during ripening and on the implications on postharvest quality of the fruit.

Circular bioeconomy: Life cycle assessment of scaled-up cascading production from orange peel waste under current and future electricity mixes

Orange peel waste (OPW) is present in large quantities both locally and globally, which makes them feasible input into the circular bioeconomy. However, due to their antimicrobial and anti-nutritional activity, they are problematic biomass, and proper waste management is yet to be determined. This life cycle assessment (LCA) quantifies the environmental performance of biorefinery producing limonene, citric acid, and animal feed from OPW generated from juice factories. Only previously assessed sustainable technologies were considered (cold press, microwave extraction, solid-state fermentation). The life cycle inventories were refined by a scale-up procedure to reflect industrial production at i) 0.5 t, ii) 100 t, and iii) 1000 t of OPW weekly. The data were translated per functional unit of 1 tonne OPW. Three electricity mixes and both attributional (average) and consequential (marginal) inventories were compared. Results showed that the environmental performance, in particular for climate change, was essentially dependent upon the electricity input, with 4388 CO₂ eq for current electricity mix, 2404 CO₂ eq using renewable, and 594 CO₂ eq using electricity from wind. Business-as-usual scenarios for OPW (incineration and animal feed) showed better performance in most scenarios, representing -150 CO₂ eq (animal feed) and -135 CO₂ eq (incineration) in the climate change. Lower impacts are reached due to avoided impacts of fossil fuel use and conventional feed cultivation. Renewable energy had better environmental performance than the current electricity mix, except for eutrophication, due to digestate spreading associated with biogas use, calling for mitigation action. Our results suggest that stopping the biorefinery processes immediately after the recovery of limonene via solvent-free microwave extraction process, with subsequent use of the dried OPW as animal feed, is the most environmentally performant option. This represents a feasible strategy for the circular bioeconomy and is in line with the updated food waste hierarchy.

Simple Strategies to Modulate the pH-Responsiveness of Lignosulfonate-Based Delivery Systems

The extensive use of non-degradable microplastics in a wide plethora of daily life products is causing serious pollution problems. More ecofriendly solutions are therefore urgently needed. In this context, the use of lignin, a largely available aromatic polymer, may represent a viable option. Due to the self-assembly ability of its molecules, lignin is in fact an ideal matrix for the fabrication of nanostructures. In this study, lignosulfonate microcapsules containing a limonene core were prepared and characterized in terms of their dimensions and of the physicochemical characteristics of the capsule-forming lignosulfonate molecules. The main purpose is to elucidate the key properties governing the pH-responsive behavior of the capsules to be able to achieve better control over the release kinetics of the entrapped compound(s). The results demonstrate that both the molecular weight and the concentration of sulfonate groups are the most important factors in this respect. Based on these findings, two strategies were followed to further tailor the capsules' behavior: (i) fractionation of the starting lignosulfonate by solvent extraction and (ii) introduction of a specific additive in the formulation. The first approach permitted to fabricate highly resistant capsules both in acidic, as well as in alkaline conditions, while in the second case the chemical structure of the additive, the diester diveratryl sebacate, allowed for fast kinetics of release, as values above 70% were reached after 24 h of incubation at pH 4 and pH 12.

Novel Biobased Epoxy Thermosets and Coatings from Poly(limonene carbonate) Oxide and Synthetic Hardeners

In the area of coating development, it is extremely difficult to find a substitute for bisphenol A diglycidyl ether (DGEBA), the classical petroleum-based raw material used for the formulation of epoxy thermosets. This epoxy resin offers fast curing reaction with several hardeners and the best thermal and chemical resistance properties for applications in coatings and adhesive technologies. In this work, a new biobased epoxy, derived from poly(limonene carbonate) oxide (PLCO), was combined with polyetheramine and polyamineamide curing agents, offering a spectrum of thermal and mechanical properties, superior to DGEBA-based thermosets. The best formulation was found to be a combination of PLCO and a commercial curing agent (Jeffamine) in a stoichiometric 1:1 ratio. Although PLCO is a solid due to its high molecular weight, it was possible to create a two-component partially biobased epoxy paint without the need of volatile organic compounds (i.e., solvent-free formulation), intended for use in coating technology to partially replace DGEBA-based thermosets.

Chemistry and human exposure implications of secondary organic aerosol production from indoor terpene ozonolysis

Surface cleaning using commercial disinfectants, which has recently increased during the coronavirus disease 2019 pandemic, can generate secondary indoor pollutants both in gas and aerosol phases. It can also affect indoor air quality and health, especially for workers repeatedly exposed to disinfectants. Here, we cleaned the floor of a mechanically ventilated office room using a commercial cleaner while concurrently measuring gas-phase precursors, oxidants, radicals, secondary oxidation products, and aerosols in real-time; these were detected within minutes after cleaner application. During cleaning, indoor monoterpene concentrations exceeded outdoor concentrations by two orders of magnitude, increasing the rate of ozonolysis under low (<10 ppb) ozone levels. High number concentrations of freshly nucleated sub-10-nm particles (≥10⁵ cm^-3) resulted in respiratory tract deposited dose rates comparable to or exceeding that of inhalation of vehicle-associated aerosols.

Highly selective acid-catalyzed olefin isomerization of limonene to terpinolene by kinetic suppression of the overreactions in a confined space of porous metal-macrocycle framework

Natural enzymes control the intrinsic reactivity of chemical reactions in the natural environment, giving only the necessary products. In recent years, challenging research on the reactivity control of terpenes with structural diversity using artificial host compounds that mimic such enzymatic reactions has been actively pursued. A typical example is the acid-catalyzed olefin isomerization of (+)-limonene, which generally gives a complex mixture due to over-isomerization to thermodynamically favored isomers. Herein we report a highly controlled conversion of (+)-limonene by kinetic suppression of over-isomerization in a confined space of a porous metal–macrocycle framework (MMF) equipped with a Brønsted acid catalyst. The terminal double bond of (+)-limonene migrated to one neighbor, preferentially producing terpinolene. This reaction selectivity was in stark contrast to the homogeneous acid-catalyzed reaction in bulk solution and to previously reported catalytic reactions. X-ray structural analysis and examination of the reaction with adsorption inhibitors suggest that the reactive substrates may bind non-covalently to specific positions in the confined space of the MMF, thereby inhibiting the over-isomerization reaction. The nanospaces of the MMF with substrate binding ability are expected to enable highly selective synthesis of a variety of terpene compounds.

A porous metal–macrocycle framework (MMF) equipped with a Brønsted acid catalyst in nanochannels enables highly selective isomerization of limonene to terpinolene by kinetically suppressing over-isomerization at confined acid sites.

Activated Carbon Modification towards Efficient Catalyst for High Value-Added Products Synthesis from Alpha-Pinene

DT0-activated carbons modified with HCl and HNO₃ acids, which were used for the first time in the catalytic process of alpha-pinene isomerization, are presented in this study. The carbon materials DT0, DT0_HCl, DT0_HNO₃, and DT0_HCl_HNO₃ were examined with the following methods: XRF, SEM, EDX, XPS, FT-IR, XRD, and N₂ adsorption at −196 °C. It was shown that DT0_HCl_HNO₃-activated carbon was the most active material in the alpha-pinene isomerization process. Detailed studies of alpha-pinene isomerization were carried out over this carbon by changing the reaction parameters such as time (5–180 min) and temperature (60–175 °C). The 100% conversion of alpha-pinene was achieved at the temperature of 160 °C and catalyst content of 5 wt% after 3 h over the DT0_HCl_HNO₃ catalyst. Camphene and limonene were the main products of the alpha-pinene isomerization reaction.

Water-Soluble Ruthenium (II) Complex Derived From Optically Pure Limonene and Its Microencapsulation Are Efficient Tools Against Bacterial Food Pathogen Biofilms: Escherichia coli, Staphylococcus aureus, Enteroccocus faecalis, and Listeria monocytogenes

Bioactive aminooxime ligands based on optically pure (R)-limonene have been synthesized in two steps. Their ruthenium (II) cationic water-soluble complex was prepared by a reaction between dichloro (para-cymene) ruthenium (II) dimers and aminooxime ligands in a 1:2 molar ratio. Antibacterial and antibiofilm activities of the synthetized complex were assessed against Escherichia coli, Staphylococcus aureus, Listeria monocytogenes, and Enterococcus faecalis. The results revealed that the ruthenium (II) complex has higher antibacterial and antibiofilm activities in comparison with free ligands or the enantiopure (R)-limonene. Moreover, microencapsulation of this complex reduced its cytotoxicity and improved their minimum inhibitory concentration and antibiofilm activity toward the considered bacteria. The ruthenium (II) complex targets the bacterial cell membrane, which leads to rapid leakage of intracellular potassium. Our study suggests that the developed ruthenium (II) complexes could be useful as an alternative to conventional disinfectants.

Advances in sustainable approaches utilizing orange peel waste to produce highly value-added bioproducts

Orange peel waste (OPW), a discarded part of orange fruit, is a rich source of essential constituents that can be transformed into highly value-added bioproducts. OPW is being generated in million tonnes globally and returns to the environment without complete benefit. Thus, a high volume of annually produced OPW in the industry requires effective valorization. In this regard, limited data is available that summarizes the broader spectrum for the sustainable fate of OPW to produce value-added bioproducts. The main objective of this treatise is to explore the sustainable production of bioproducts from OPW. Therefore, this review covers all the aspects of OPW, from its production to complete valorization. The review encompasses the extraction technologies employed for extracting different valuable bioactive compounds, such as: essential oil (EO), pectin, and carotenoids, from OPW. Furthermore, the suitability of bioconversion technologies (digestion/fermentation) in transforming OPW to other useful bioproducts, such as: biochemicals (lactic acid and succinic acid), biopolysaccharides (xanthan and curdlan gum), and bioenergy (biomethane and bioethanol) is discussed. Also, it includes the concept of OPW-based biorefineries and their development that shall play a definite role in future to cover demands for: food, chemicals, materials, fuels, power, and heat. Lastly, this review focuses on OPW-supplemented functional food products such as: beverages, yogurts, and extruded products. In conclusion, insights provided in this review maximize the potential of OPW for commercial purposes, leading to a safe, and waste-free environment.

A 5-(2-Pyridyl)tetrazolate Complex of Molybdenum(VI), Its Structure, and Transformation to a Molybdenum Oxide-Based Hybrid Heterogeneous Catalyst for the Epoxidation of Olefins

There is a considerable practical interest in discovering new ways to obtain organomolybdenum heterogeneous catalysts for olefin epoxidation that are easier to recover and reuse and display enhanced productivity. In this study, the complex salt (H2pytz)[MoO2Cl2(pytz)] (1) (Hpytz = 5-(2-pyridyl)tetrazole) has been prepared, structurally characterized, and employed as a precursor for the hydrolysis-based synthesis of a microcrystalline molybdenum oxide/organic hybrid material formulated as [MoO3(Hpytz)] (2). In addition to single-crystal X-ray diffraction (for 1), compounds 1 and 2 were characterized by FT-IR and Raman spectroscopies, solid-state 13C{1H} cross-polarization (CP) magic-angle spinning (MAS) NMR, and scanning electron microscopy (SEM). Compounds 1 and 2 were evaluated as olefin epoxidation catalysts using the model reaction of cis-cyclooctene (Cy8) with tert-butyl hydroperoxide (TBHP), at 70 °C, which gave 100% epoxide selectivity up to 100% conversion. While 1 behaved as a homogeneous catalyst, hybrid 2 behaved as a heterogeneous catalyst and could be recovered for recycling without showing structural degradation or loss of catalytic performance over consecutive reaction cycles. The substrate scope was broadened to monoterpene DL-limonene (Lim) and biobased unsaturated fatty acid methyl esters, methyl oleate (MeOle), and methyl linoleate (MeLin), which gave predominantly epoxide products.

Allergic contact dermatitis from ("hypoallergenic") adhesives containing D-limonene

BACKGROUND

Besides being a potential component of (some species of) colophonium, D-limonene is also used as a tackifier in the production of adhesives. Hydroperoxides of limonene are well-known skin sensitizers.

OBJECTIVES

To show that D-limonene may be present in colophonium-containing but also colophonium-free ("hypoallergenic") adhesives, and that patients suffering from allergic contact dermatitis (ACD) from both types of adhesives might display positive patch test reactions to limonene hydroperoxides in this regard.

METHODS

Five patients with suspected ACD from adhesives were patch tested to the baseline series (containing limonene hydroperoxides 0.3 and 0.2% pet.), additional series and, if available, to the culprit adhesives. The adhesives labelled as containing colophonium (n = 3) or free from it (n = 2) were analysed with gas chromatography - mass spectrometry (GC-MS) for the presence of D-limonene.

RESULTS

All five patients sensitised to adhesives had (strong) positive patch test reactions to limonene hydroperoxides. The presence of D-limonene, and/or related components, could be demonstrated in all three colophonium-containing and, surprisingly, also in two colophonium-free ("hypoallergenic") tapes.

CONCLUSIONS

D-limonene may be present in both regular and "hypoallergenic" adhesives, with limonene hydroperoxides potentially contributing to ACD from such medical devices. The use of fragrance chemicals in adhesives deserves further research.

Effect of Limonene on Cancer Development in Rodent Models: A Systematic Review

Cancer is a major health issue and one of the leading causes of death worldwide. Many natural compounds, e.g., lycopene, curcumin, resveratrol, etc., have been shown to inhibit the growth of cancer cells. Similarly, limonene, a major active component in citrus essential oils and widely used flavoring additive, has demonstrated anticarcinogenic effects in both cell and animal studies. This systematic review aimed to evaluate the anticarcinogenic effects of limonene and its potential underlying mechanisms. Eight peer-reviewed articles published in English between 2000 and 2020 were identified after screening using MEDLINE, Academic Search Premier, and CINAHL plus. All 8 studies showed an effect of limonene on reducing tumor burden, resulting in either decreased size, number, weight, or multiplicities of tumors. Limonene treatment extended the latency and survival periods in 2 studies yet did not reduce tumor incidence rate in another study. Limonene was shown to promote cell apoptosis in 4 studies that examined either the apoptosis index or apoptosis related gene/protein expressions. Two studies tried to explain the cancer preventive mechanisms of limonene and found limonene could restore the antioxidant capacity or immune functions that were impaired by cancer. These results supported the potential applicability of limonene on inhibiting cancer development, yet the real-world applicability on human requires more research and evaluation through clinical studies.

Systematic Review Registration: PROSPERO, identifier: CRD42020168387.

Metabolic engineering of microbes for monoterpenoid production

Monoterpenoids are an important class of natural products that are derived from the condensation of two five‑carbon isoprene subunits. They are widely used for flavouring, fragrances, colourants, cosmetics, fuels, chemicals, and pharmaceuticals in various industries. They can also serve as precursors for the production of many industrially important products. Currently, monoterpenoids are produced predominantly through extraction from plant sources. However, the small quantity of monoterpenoids in nature renders this method of isolation non-economically viable. Similarly impractical is the chemical synthesis of these compounds as they suffer from high energy consumption and pollutant discharge. Microbial biosynthesis, however, exists as a potential solution to these hindrances, but the transformation of cells into efficient factories remains a major impediment. Here, we critically review the recent advances in engineering microbes for monoterpenoid production, with an emphasis on categorized strategies, and discuss the challenges and perspectives to offer guidance for future engineering.

Mesoporous silica particles functionalized with newly extracted fish oil (Omeg@Silica) inhibit lung cancer cell growth

Aim: To assess whether Omeg@Silica microparticles - fish oil from anchovy fillet leftovers (AnchoisOil) encapsulated within mesoporous silica particles - are effective in promoting antitumor effects in lung cancer cells. Methods: Three human non-small-cell lung cancer cell lines (A549, Colo 699 and SK-MES-1) were used. Cells were treated with AnchoisOil dispersed in ethanol (10 and 15 μg/ml) or encapsulated in silica and further formulated in aqueous ethanol. Cell cycle, reactive oxygen species, mitochondrial stress and long-term proliferation were assessed. Results & conclusion: Omeg@Silica microparticles were more effective than fish oil in increasing reactive oxygen species and mitochondrial damage, and in altering the cell cycle and reducing cell proliferation, in lung cancer cells. These in vitro antitumor effects of Omeg@Silica support its investigation in lung cancer therapy.

Increased disinfection byproducts in the air resulting from intensified disinfection during the COVID-19 pandemic

Intensified use of disinfectants to control COVID-19 could unintentionally increase the disinfection byproducts (DBPs) in the environment. In indoor spaces, it is critical to determine the optimal disinfection practice to prevent the spread of the virus while keeping DBPs at relatively low levels in the air. The formation of DBPs exceed 0.1 μg/mg while hypochlorite dosed at >10 mg/m3. The total DBP concentrations in highly disinfected places (100-200 mg/m3 hypochlorite) were as high as 66.8 μg/m3, and the Hazard Index (HI) was up to 0.84, and both values were much higher than those in less disinfected places (<10 mg/m3 hypochlorite). Taking into account the HI, formation yields and the origin of the DBPs, we recommended 10 mg/m3 as the suggested hypochlorite dose to minimize DBPs generation during routine disinfection for controlling the coronavirus. DBPs in indoor air could be eliminated by ventilation, reducing the usage of personal care products, and wiping the solid surface with water before or after disinfection. These results highlighted the necessity to control air-borne DBPs and their associated health risks arising from intensified disinfection, and will guide the further development of evidence-based regulation on DBP exposure during disinfection and improve public health protection.

Stereospecific Epoxidation of Limonene Catalyzed by Peroxygenase from Oat Seeds

Limonene is one of the most abundant naturally occurring cyclic monoterpenes and has recently emerged as a sustainable alternative to petroleum-based solvents as well as a chemical platform for the production of value-added compounds. The biocatalytic epoxidation of both enantiomers of limonene was carried out in the presence of a peroxygenase-containing preparation from oat (Avena sativa) flour. Different reaction profiles were observed depending on the starting enantiomer of limonene, but in both cases the 1,2-monoepoxide was obtained as the main product with excellent diastereoselectivity. Trans-1,2-monoepoxide and cis-1,2-monoepoxide were isolated from the reaction of (R)-limonene and (S)-limonene, respectively, and the reactions were scaled-up to 0.17 M substrate concentration. The process is valuable for operational simplicity, lack of toxic metal catalysts, and cost-effectiveness of the enzymatic source. Pure stereoisomers of 1,2-monoepoxides of limonene constitute a useful starting material for biorenewable polymers, but can be also converted into other chiral derivatives by epoxide ring opening with nucleophiles. As a proof of concept, a tandem protocol for the preparation of enantiopure (1S,2S,4R)-1,2-diol from (R)-limonene and (1R,2R,4S)-1,2-diol from (S)-limonene was developed.

Effect of d-limonene and its derivatives on breast cancer in human trials: a scoping review and narrative synthesis

BACKGROUND

D-limonene and its derivatives have demonstrated potential chemopreventive and anticancer activity in preclinical and clinical studies. The aim of this scoping review was to assess and critically appraise current literature on the effect of these bioactive citrus peel compounds on breast cancer in human trials and to identify knowledge gaps for exploration in future studies.

METHODS

This study followed a scoping review framework. Peer-reviewed journal articles were included if they reported the effect of d-limonene or its derivatives on breast cancer in human subjects. Articles were retrieved from academic databases - PubMed, EMBASE, CINAHL, Web of Science, and Cochrane reviews - and iteratively through review of bibliographies of relevant manuscripts. Titles and abstracts were appraised against the aforementioned inclusion criteria in a first round of screening. Through consensus meetings and full article review by authors, a final set of studies were selected. Results were reported according to the PRISMA extension for scoping reviews.

RESULTS

Our search strategy yielded 367 records. Following screening and adjudication, five articles reporting on phase 1(n = 2), phase 2 (n = 2) and both trial phases (n = 1) were included as the final dataset for this review. Trials evaluating the effect of d-limonene (n = 2) showed it was well tolerated in subjects. One study (n = 43 participants) showed d-limonene concentrated in breast tissue (mean 41.3 μg/g tissue) and reduction in tumor cyclin D1 expression, which is associated with tumor proliferation arrest. This study did not show meaningful change in serum biomarkers associated with breast cancer, except for a statistically significant increase in insulin-like growth factor-1 (IGF-I) levels. While elevation of IGF-I is associated with increased cancer risk, the clinical implication of this study remains uncertain given its short duration. Trials with perillyl alcohol (n = 3) showed low tolerance and no effect on breast cancer.

CONCLUSION

This review demonstrated a dearth of clinical studies exploring the effect of d-limonene and its derivatives on breast cancer. Limited literature suggests d-limonene is safe and tolerable in human subjects compared to its derivative, perillyl alcohol. Our review demonstrates the need for additional well-powered placebo-controlled trials that assess d-limonene's efficacy on breast cancer compared to other therapies.

Influence of Synthetic Flavorings on the Migration Activity of Tribolium confusum and Sitophilus granarius

Flavorings and volatile biologically active substances, used by humans for various purposes, may potentially have fumigating, repellent, or attractive effects on various species of anthropod storage pests. Tribolium confusum Jacquelin du Val, 1863 (Tenebrionidae) and Sitophilus granarius (Linnaeus, 1758) (Curculionidae) are the two most abundant pests of grain and grain products; the damage they cause to stored products of horticulture is 5–20% of the total yield of grain crops. In the experiment, we video-recorded migratory activity of beetles and evaluated it according to standard time periods (10, 20, 30, 60, and 120 seconds after the start of the experiment). No reliable influence of the 15 tested flavoring substances (benzyl alcohol, benzoic acid, toluene, hydroquinone, phenethyl alcohol, pinene, methylparaben, kojic acid, formic acid, isoamyl alcohol, tartaric acid, glycine, succinic acid, stearic acid, and ethylenediaminetetraacetic acid) on moving activity of Tribolium confusum was found. Exposure to benzyl alcohol brought a reliable decrease in locomotor activity of Sitophilus granarius (it exerted an attractant effect on imagoes as compared with the variant of the experiment without aromatic substances): 6.09 times more imagoes of S. granarius remained at a minimal distance from the aroma source than in the control, 6.07 more while exposed to hydroquinone, 5.50 to phenethyl alcohol, 4.50 to glycine, 3.44 to EDTA, 3.30 to toluene, 3.18 to methylparaben, 2.84 to succinic acid, 2.65 to benzoic acid, and 2.15 more when exposed to formic acid compared with the control variant of the experiment. Other surveyed flavoring substances (benzyl alcohol, pinene, kojic acid, isoamyl alcohol, tartaric acid, and stearic acid) had no significant effect on migratory activity of imagoes of S. granarius. The results allow us to recommend benzyl alcohol, hydroquinone, phenethyl alcohol, and glycine as potential luring substances or components of multicomponent flavoring mixtures during the assessment of the number of S. granarius in grain storage and processing facilities.

Epoxidation of Terpenes

Terpene epoxides are considered as potential primary intermediates in the synthesis of numerous green polymers including epoxy resins, polycarbonates, nonisocyanate polyurethanes and even some polyamides. In this chapter we describe recent efforts from our group to develop catalytic and noncatalytic processes for terpene epoxidation using a variety of oxidizing agents and process intensification methods. Most experimental tests deal with limonene epoxidation with applicability to some other terpenes also demonstrated.

Chitosan nanoparticles containing limonene and limonene-rich essential oils: potential phytotherapy agents for the treatment of melanoma and breast cancers

BACKGROUND

Melanoma and breast cancers are two common cancers worldwide. Due to the side effects of chemotherapy drugs and the occurring resistance against them, the development of green drugs has been received more attention.

METHODS

The anticancer effects of three essential oils from the Citrus family and their identified major constituents (limonene) were first investigated against melanoma and breast cancer cell lines (A-375 and MDA-MB-468). By preparing chitosan nanoparticles containing them, an attempt was then made to improve their effectiveness.

RESULTS

Chitosan nanoparticles containing Citrus sinensis and Citrus limon essential oils with IC50s of 0.03 and 0.124 μg/mL on A-375 cells, and 23.65 and 40.32 μg/mL on MDA-MB-468 showed distinct anticancer efficacies.

CONCLUSION

The prepared formulations could thus be considered as green anticancer agents in complementary medicine and therapies.

Bio-based Poly(hydroxy urethane)s: Synthesis and Pre/Post-Functionalization

New and emerging demand for polyurethane (PU) continues to rise over the years. The harmful isocyanate binding agents and their integrated PU products are at the height of environmental concerns, in particular PU (macro and micro) pollution and their degradation problems. Non-isocyanate poly(hydroxy urethane)s (NIPUs) are sustainable and green alternatives to conventional PUs. Since the introduction of NIPU in 1957, the market value of NIPU and its hybridized materials has increased exponentially in 2019 and is expected to continue to rise in the coming years. The secondary hydroxyl groups of these NIPU's urethane moiety have revolutionized them by allowing for adequate pre/post functionalization. This minireview highlights different strategies and advances in pre/post-functionalization used in biobased NIPU. We have performed a comprehensive evaluation of the development of new ideas in this field to achieve more efficient synthetic biobased hybridized NIPU processes through selective and kinetic understanding.

High Performance, Fully Bio-Based, and Optically Transparent Wood Biocomposites

The sustainable development of engineering biocomposites has been limited due to a lack of bio-based monomers combining favorable processing with high performance. Here, the authors report a novel and fully bio-based transparent wood biocomposite based on green synthesis of a new limonene acrylate monomer from renewable resources. The monomer is impregnated and readily polymerized in a delignified, succinylated wood substrate to form optically transparent biocomposites. The chemical structure of the limonene acrylate enables diffusion into the cell wall, and the polymer phase is both refractive index-matched and covalently linked to the wood substrate. This results in nanostructured biocomposites combining an excellent optical transmittance of 90% at 1.2 mm thickness and a remarkably low haze of 30%, with a high mechanical performance (strength 174 MPa, Young's modulus 17 GPa). Bio-based transparent wood holds great potential towards the development of sustainable wood nanotechnologies for structural applications, where transparency and mechanical performance are combined.

Essential oils as additives in active starch-based food packaging films: A review

The production of sustainable food packaging from renewable sources represents a prominent alternative to the use of petrochemical-based plastics. For example, starch remains one of the more closely studied replacement options due to its broad availability, low cost and significant advances in improving properties. In this context, essential oils as additives fulfil a key role in the manufacture of renewable active packaging with superior performances. In this review, a comprehensive summary of the impact of adding essential oils to the starch-based films is provided. After a brief introduction to the fundamental concepts related to starch and essential oils, details on the most recent advances in obtaining active starch-based films are presented. Subsequently, the effects of essential oils addition on the structure-property relationships (from physicochemical to antimicrobial ones) are thoroughly addressed. Finally, applications and challenges to the widespread use of essential oils are critically discussed.

Antimicrobial Activity of Selected Essential Oils against Selected Pathogenic Bacteria: In Vitro Study

The worldwide problem of infectious diseases has appeared in recent years, and antimicrobial agents are crucial in reducing disease emergence. Nevertheless, the development and distribution of multidrug-resistant (MDR) strains in pathogenic bacteria, such as Escherichia coli, Staphylococcus aureus, Salmonella Typhi and Citrobacter koseri, has become a major society health hazard. Essential oils could serve as a promising tool as a natural drug in fighting the problem with these bacteria. The current study aimed to investigate the antimicrobial effectiveness of tea tree (Melaleuca alternifolia (Maiden and Betche) Cheel), rosemary (Rosmarinus officinalis L.), eucalyptus (Eucalyptus obliqua L'Hér.), and lavender (Lavandula angustifolia Mill) essential oils. The antimicrobial properties of essential oils were screened against four pathogenic bacteria, E. coli, S. aureus, S. Tyhpi, and C. koseri, and two reference bacterial strains, while for the testing, the agar well diffusion method was used. Gas chromatography (GC) and gas chromatography-mass spectrometric (GC-MSD) analyses were performed on essential oils. The obtained results showed that M. alternifolia essential oil is the richest in terpinen-4-ol, R. officinalis and E. oblique essential oils in 1,8-cineole, and L. angustifolia essential oil in α-terpinyl acetate. In addition, the main bioactive compounds present in the essential oil of tea tree are rich in α-pinene (18.38%), limonene (7.55%) and γ-terpinene (14.01%). The essential oil of rosemary is rich in α-pinene (8.38%) and limonene (11.86%); eucalyptus essential oil has significant concentrations of α-pinene (12.60%), p-cymene (3.24%), limonene (3.87%), and γ-terpinene (7.37%), while the essential oil of lavender is rich in linalool (10.71%), linalool acetate (9.60%), α-terpinyl acetate (10.93%), and carbitol (13.05%) bioactive compounds, respectively. The obtained results from the in vitro study revealed that most of the essential oils exhibited antimicrobial properties. Among the tested essential oils, tea tree was discovered to demonstrate the strongest antimicrobial activity. The recorded MIC of S. Typhi was 6.2 mg/mL, 3.4 mg/mL of C. koseri, 3.1 mg/mL of E. coli, and 2.7 mg/mL of E. coli ATCC 25922, compared to M. alternifolia. Similarly, only S. aureus ATCC 25923 showed antimicrobial activity towards R. officinalis (1.4 mg/mL), E. oblique (2.9 mg/mL), and L. angustifolia (2.1 mg/mL). Based on the obtained results, it is possible to conclude that tea tree essential oil might be used as an ecological antimicrobial in treating infectious diseases caused by the tested pathogens.

Omeg@Silica: Entrapment and Stabilization of Sustainably Sourced Fish Oil

Fish oil rich in long-chain polyunsaturated fatty acids, vitamin D3 and carotenoid pigments have been sustainably extracted from anchovy fillet leftovers using biobased limonene. The oil is conveniently stabilized by adsorption on periodic mesoporous silicas. The simplicity of the process, the high load of fish oil, and the biocompatible nature of mesoporous silica support numerous forthcoming applications of this new class of "Omeg@Silica" materials.

Simultaneous Improvement of Limonene Production and Tolerance in Yarrowia lipolytica through Tolerance Engineering and Evolutionary Engineering

Limonene is an important plant natural product widely used in food and cosmetics production as well as in the pharmaceutical and chemical industries. However, low efficiency of plant extraction and high energy consumption in chemical synthesis limit the sustainability of industrial limonene production. Recently, the advancement of metabolic engineering and synthetic biology has facilitated the engineering of microbes into microbial cell factories for producing limonene. However, the deleterious effects on cellular activity by the toxicity of limonene is the major obstacle in achieving high-titer production of limonene in engineered microbes. In this study, by using transcriptomics, we identified 82 genes from the nonconventional yeast Yarrowia lipolytica that were up-regulated when exposed to limonene. When overexpressed, 8 of the gene candidates improved tolerance of this yeast to exogenously added limonene. To determine whether overexpression of these genes could also improve limonene production, we individually coexpressed the tolerance-enhancing genes with a limonene synthase gene. Indeed, expression of 5 of the 8 candidate genes enhanced limonene production in Y. lipolytica. Particularly, overexpressing YALI0F19492p led to an 8-fold improvement in product titer. Furthermore, through short-term adaptive laboratory evolution strategy, in combination with morphological and cytoplasmic membrane integrity analysis, we shed light on the underlying mechanism of limonene cytotoxicity to Y. lipolytica. This study demonstrated an effective strategy for improving limonene tolerance of Y. lipolytica and limonene titer in the host strain through the combinatorial use of tolerance engineering and evolutionary engineering.

The Limonene Biorefinery: From Extractive Technologies to Its Catalytic Upgrading into p-Cymene

Limonene is a renewable cyclic monoterpene that is easily obtainable from citrus peel and it is commonly used as a nutraceutical ingredient, antibacterial, biopesticide and green extraction solvent as well as additive in healthcare, fragrance and food and beverage industries for its characteristic lemon-like smell. Indeed, the lack of toxicity makes limonene a promising bio-alternative for the development of a wide range of effective products in modern biorefineries. As a consequence, industrial demand largely exceeds supply by now. Limonene can be also used as starting substrate for the preparation of building block chemicals, including p-cymene that is an important intermediate in several industrial catalytic processes. In this contribution, after reviewing recent advances in the recovery of limonene from citrus peel and residues with particular attention to benign-by-design extractive processes, we focus on the latest results in its dehydrogenation to p-cymene via heterogeneous catalysis. Indeed, the latest reports evidence that the selective production of p-cymene still remains a scientific and technological challenge since, in order to drive the isomerization and dehydrogenation of limonene, an optimal balance between the catalyst nature/content and the reaction conditions is needed.

A step closer to circular bioeconomy for citrus peel waste: A review of yields and technologies for sustainable management of essential oils

This study presents a critical overview of reported essential oil (EO) extractions from citrus peel wastes (CPW), including harmonized data on the various citrus species and cultivars. Harmonization is vital to enable sustainable management practices. The review only includes eco-efficient extraction techniques. In total, the review contains 66 quantified examples using i) mechanical cold press ii) thermal extraction with water or steam media iii) thermal microwave-assisted extraction iv) other innovative methods (such as ultrasound). The technologies were assessed for their potential use in cascading production to achieve economies of scope, particularly considering the use of extraction residues for subsequent fermentation to produce various products from energy carriers to enzymes. Two techniques were found insufficient for direct use in fermentation. Cold press extracts an inadequate amount of EO (average yield 2.85% DW) to ensure suitable fermentation, while solvent extraction contaminates the residues for its subsequent use. Extractions using water media, such as hydrodistillation and microwave-assisted hydrodistillation (average EO yield 2.87% DW), are feasible for the liquid-based fermentation processes, such as submerged fermentation. Steam extraction is feasible for any type of fermentation. Our review highlighted solvent-free microwave extraction (average EO yield 5.29% DW) as the most effective method, which provides a high yield in a short extraction time. We also uncovered and discussed several inconsistencies in existing yields and energy consumption published data.

Plant Secondary Metabolites: An Opportunity for Circular Economy

Moving toward a more sustainable development, a pivotal role is played by circular economy and a smarter waste management. Industrial wastes from plants offer a wide spectrum of possibilities for their valorization, still being enriched in high added-value molecules, such as secondary metabolites (SMs). The current review provides an overview of the most common SM classes (chemical structures, classification, biological activities) present in different plant waste/by-products and their potential use in various fields. A bibliographic survey was carried out, taking into account 99 research articles (from 2006 to 2020), summarizing all the information about waste type, its plant source, industrial sector of provenience, contained SMs, reported bioactivities, and proposals for its valorization. This survey highlighted that a great deal of the current publications are focused on the exploitation of plant wastes in human healthcare and food (including cosmetic, pharmaceutical, nutraceutical and food additives). However, as summarized in this review, plant SMs also possess an enormous potential for further uses. Accordingly, an increasing number of investigations on neglected plant matrices and their use in areas such as veterinary science or agriculture are expected, considering also the need to implement "greener" practices in the latter sector.

Effects of storage on the oxidative stability of acorn oils extracted from three different Quercus species

BACKGROUND

Acorn fruit and its components and by-products are receiving renewed interest due to their nutritional and phytochemical features. In particular, the oil extracted from acorns is recognized for having high nutritional quality and for being rich in bioactive compounds. Despite the growing interest, few papers are available that consider the evolution of acorn-oil characteristics during storage. Our aim was to investigate the storage-related changes in acorn oils extracted from three Quercus species grown in Algeria (Q. ilex, Q. suber, and Q. coccifera) 180 days after production, with a focus on polar and volatile compounds, not yet investigated. Basic quality parameters, phenolic content, antioxidant activity and induction time were also monitored.

RESULTS

The oxidation markers (peroxide value and UV absorptions) increased during storage, whereas antioxidants decreased. A distinctive volatile profile was observed at the time of production, which underwent changes during storage. Polar compounds increased, whereas induction time decreased. The oil extracted from Quercus suber L. was the most affected by storage time.

CONCLUSION

Floral and fruity volatile compounds detected in the oils' headspace could explain the pleasant flavor of acorn oils reported by other authors. As with other vegetable oils, storage depletes both volatiles and antioxidants and produces oxidation compounds, such as oxidized triacylglycerols. However, the acorn oils that were studied were quite stable under storage in the dark at room temperature for 6 months. © 2020 Society of Chemical Industry.

Opportunities for the Use of Brazilian Biomass to Produce Renewable Chemicals and Materials

This Review highlights the principal crops of Brazil and how their harvest waste can be used in the chemicals and materials industries. The Review covers various plants; with grains, fruits, trees and nuts all being discussed. Native and adopted plants are included and studies on using these plants as a source of chemicals and materials for industrial applications, polymer synthesis, medicinal use and in chemical research are discussed. The main aim of the Review is to highlight the principal Brazilian agricultural resources; such as sugarcane, oranges and soybean, as well as secondary resources, such as andiroba brazil nut, buriti and others, which should be explored further for scientific and technological applications. Furthermore, vegetable oils, carbohydrates (starch, cellulose, hemicellulose, lignocellulose and pectin), flavones and essential oils are described as well as their potential applications.

Kinetic investigation of aerobic epoxidation of limonene over cobalt substituted mesoporous SBA-16

Incorporation of low coordination Co²⁺ within the structure of mesoporous silica SBA-16 has been accomplished through a facile and green “pH adjusting” method.

Current Advances in the Bacterial Toolbox for the Biotechnological Production of Monoterpene-Based Aroma Compounds

Monoterpenes are plant secondary metabolites, widely used in industrial processes as precursors of important aroma compounds, such as vanillin and (-)-menthol. However, the physicochemical properties of monoterpenes make difficult their conventional conversion into value-added aromas. Biocatalysis, either by using whole cells or enzymes, may overcome such drawbacks in terms of purity of the final product, ecological and economic constraints of the current catalysis processes or extraction from plant material. In particular, the ability of oxidative enzymes (e.g., oxygenases) to modify the monoterpene backbone, with high regio- and stereo-selectivity, is attractive for the production of "natural" aromas for the flavor and fragrances industries. We review the research efforts carried out in the molecular analysis of bacterial monoterpene catabolic pathways and biochemical characterization of the respective key oxidative enzymes, with particular focus on the most relevant precursors, β-pinene, limonene and β-myrcene. The presented overview of the current state of art demonstrates that the specialized enzymatic repertoires of monoterpene-catabolizing bacteria are expanding the toolbox towards the tailored and sustainable biotechnological production of values-added aroma compounds (e.g., isonovalal, α-terpineol, and carvone isomers) whose implementation must be supported by the current advances in systems biology and metabolic engineering approaches.

Analysis of the Circular Economic Production Models and Their Approach in Agriculture and Agricultural Waste Biomass Management

As of now, circular economic production models of the circular economy (CEPMs), which include circular economy, bioeconomy, and circular bioeconomy, are among the main tools characterizing development policies in different countries. During the last five years, policies and strategies regarding CEPMs have promoted and contributed to the development of research on this topic. The evolution and most relevant aspects of the three CEPMs previously mentioned have been analyzed from a sample of 2190 scientific publications obtained from the Scopus database. Bibliometric analysis has been used to evaluate the approach of these models in agriculture and to introduce the ways in which they address the management of agricultural waste biomass (AWB). Results show that the circular economy is the most studied and prioritized model in China and most European countries, with the UK leading the way. Germany leads in topics related to the bioeconomy. The management policies and strategies of the circular bioeconomy are key to promoting research focused on AWB valorization since bioenergy and/or biofuel production continue to be a priority.

Transforming yeast peroxisomes into microfactories for the efficient production of high-value isoprenoids

Current approaches for the production of high-value compounds in microorganisms mostly use the cytosol as a general reaction vessel. However, competing pathways and metabolic cross-talk frequently prevent efficient synthesis of target compounds in the cytosol. Eukaryotic cells control the complexity of their metabolism by harnessing organelles to insulate biochemical pathways. Inspired by this concept, herein we transform yeast peroxisomes into microfactories for geranyl diphosphate-derived compounds, focusing on monoterpenoids, monoterpene indole alkaloids, and cannabinoids. We introduce a complete mevalonate pathway in the peroxisome to convert acetyl-CoA to several commercially important monoterpenes and achieve up to 125-fold increase over cytosolic production. Furthermore, peroxisomal production improves subsequent decoration by cytochrome P450s, supporting efficient conversion of (S)-(-)-limonene to the menthol precursor trans-isopiperitenol. We also establish synthesis of 8-hydroxygeraniol, the precursor of monoterpene indole alkaloids, and cannabigerolic acid, the cannabinoid precursor. Our findings establish peroxisomal engineering as an efficient strategy for the production of isoprenoids.

Optimal Design of THEDES Based on Perillyl Alcohol and Ibuprofen

Therapeutic deep eutectic systems (THEDES) have dramatically expanded their popularity in the pharmaceutical field due to their ability to increase active pharmaceutical ingredients (APIs) bioavailability. However, their biological performance has not yet been carefully scrutinized. Herein, THEDES based on the binary mixture of perillyl alcohol (POH) and ibuprofen (IBU) were prepared using different molar ratios. Our comprehensive strategy includes the characterization of their thermal and structural behavior to identify the molar ratios that successfully form deep eutectic systems. The in vitro solubility of the different systems prepared has demonstrated that, unlike other reported examples, the presence of the terpene did not affect the solubility of the anti-inflammatory agent in a physiological simulated media. The biological performance of the systems was studied in terms of their antimicrobial activity against a wide panel of microorganisms. The examined THEDES showed relevant antimicrobial activity against all tested microbial strains, with the exception of P. aeruginosa. A synergistic effect from the combination of POH and IBU as a eutectic system was verified. Furthermore, the cytotoxic profile of these eutectic systems towards colorectal cancer (CRC) in vitro cell models was also evaluated. The results provide the indication that the cell viability varies in a dose-dependent manner, with a selective THEDES action towards CRC cells. With tunable bioactivities in a ratio-dependent manner, THEDES enhanced the antimicrobial and anticancer properties, representing a possible alternative to conventional therapies. Therefore, this study provides foreseeable indications about the utility of THEDES based on POH and IBU as strong candidates for novel active pharmaceutical systems.

Diastereoselective Synthesis of P-Stereogenic Secondary Phosphine Oxides (SPOs) Bearing a Chiral Substituent by Ring Opening of (+)-Limonene Oxide with Primary Phosphido Nucleophiles

Kinetic separation of the commercially available cis/trans-(+)-limonene oxide mixture by ring opening with primary phosphido nucleophiles LiPHR (R = ferrocenyl, Ph, Cy, t-Bu, Mes* (Mes* = 2,4,6-(t-Bu)₃C₆H₂)), followed by treatment with aqueous NH₄Cl and H₂O₂, gave unreacted cis-(+)-limonene oxide and diastereoenriched mixtures of the secondary phosphine oxides (SPOs) PHR(trans-(+)-Lim-OH)(O), which could be separated by chromatography and/or recrystallization. This one-pot synthesis uses a cheap chiral material and commercially available primary phosphines to control the configuration of the new P-stereogenic SPOs, which are potentially useful as ligands for metal complexes in asymmetric catalysis.

Detrimental sublethal effects hamper the effective use of natural and chemical pesticides in combination with a key natural enemy of Bemisia tabaci on tomato

BACKGROUND

Bemisia tabaci (Hemiptera: Aleyrodidae) represents one of the greatest threats to agricultural crops. Chemical control is the primary tool used in integrated pest management (IPM) programs. However, release of the predator Nesidiocoris tenuis (Hemiptera: Miridae) on tomato plants is a highly recommended control tactic. The objective of this study was to evaluate the efficacy of a commercial borax plus citrus oil (BCO) product against B. tabaci in the presence and absence of N. tenuis. The synthetic insecticide lambda-cyhalothrin was used as a positive control. We also evaluated the sublethal effects of BCO on the behavior and predation rate of N. tenuis.

RESULTS

Our results demonstrated that BCO, alone and at its maximum recommended field rate for B. tabaci, was not effective in controlling the pest under laboratory conditions. Application of BCO simultaneous with N. tenuis release did not reduce the increase in the B. tabaci population. Effective control of B. tabaci was achieved using only N. tenuis. However, synthetic lambda-cyhalothrin pyrethroid, used here as a control, caused high pest mortality and led to on-site extinction of N. tenuis, which did not occur for insects exposed to BCO. Lambda-cyhalothrin and BCO significantly affected the foraging behavior of N. tenuis, reducing the predation rate, especially following exposure to lambda-cyhalothrin.

CONCLUSION

The insecticide lambda-cyhalothrin achieved satisfactory results in suppressing B. tabaci, but was harmful to N. tenuis. Additionally, lambda-cyhalothrin and BCO affected predator behavior. © 2020 Society of Chemical Industry.