The sensitive and selective adsorption of aromatic compounds with highly crosslinked polymer nanoparticles

Enhanced Photocatalytic Degradation of Environmental Pollutants under Visible Irradiation by a Composite Coating

Although nanotechnology has offered effective and efficient solutions for environmental remediation, the full utilization of sustainable energy and the avoidance of secondary pollution are still challenges. Herein, we report a two-step modification strategy for TiO₂ nanoparticles by first forming a thin, surface-adherent polydopamine (PDA) shell onto the nanoparticles and then assembling core-shell nanoparticles as a photodegradation coating. The composite coating modified from TiO₂ could not only realize the highly efficient utilization of photons from the visible region but also avoid the secondary pollution of nanoparticles during application. Additionally, improvements in the adsorption ability after modification greatly facilitated the photocatalytic process of the modified materials. A preliminary in vivo study on Daphnia magna and a wastewater treatment experiment suggest that treatment with the composite coating can effectively eliminate fluorene and significantly reduce its lethality. We believe the two-step modification scheme can open new avenues for the facile modification of nanomaterials for designed purposes, especially in the field of environmental remediation.

Fabrication of a polymeric composite incorporating metal-organic framework nanosheets for solid-phase microextraction of polycyclic aromatic hydrocarbons from water samples

In this contribution, it was discovered that even distribution of a metal-organic framework (MOF) [e.g. copper 1,4-benzenedicarboxylate (CBDC)] within polymeric matrixes (e.g. polyimide) resulted in a high-efficient coating material on the surface of a stainless steel wire (SSW). Consequently, a home-made solid phase microextraction (SPME) fiber was fabricated for fast determination of target analytes in real water samples. Scanning electron microscope images indicated that the coating possessed homogenously porous surface. Coupled with gas chromatography-mass spectrometry (GC-MS) and direct immersion SPME (DI-SPME) technique, the fiber was evaluated through the analysis of five polycyclic aromatic hydrocarbons (PAHs) in aqueous samples. Under optimized extraction and desorption conditions, the established method based on the home-made fiber exhibited good repeatability (4.2-12.7%, n = 6) and reproducibility (0.9-11.7%, n = 3), low limits of detection (LODs, 0.11-2.10 ng L^-1), low limits of quantification (LOQs, 0.36-6.99 ng L^-1) and wide linear ranges (20-5000 ng L^-1). Eventually, the method was proven applicable in the determination of PAHs in real samples, as the recoveries were in a satisfactory range (81.7-116%).

Knitting aromatic polymers for efficient solid-phase microextraction of trace organic pollutants

A series of knitting aromatic polymers (KAPs) were successfully synthesized using a simple one-step Friedel-Crafts alkylation of aromatic monomers and were characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). Then, as-synthesized KAPs with large surface areas, unique pore structures and high thermal stability were prepared as solid-phase microextraction (SPME) coatings that exhibited good extraction abilities for a series of benzene compounds (i.e., benzene, toluene, ethylbenzene and m-xylene, which are referred to as BTEX) and polycyclic aromatic hydrocarbons (PAHs). Under the optimized conditions, the methodologies established for the determination of BTEX and PAHs using the KAPs-triPB and KAPs-B coatings, respectively, possessed wide linear ranges, low limits of detection (LODs, 0.10-1.13ngL(-1) for BTEX and 0.05-0.49ngL(-1) for PAHs) and good reproducibility. Finally, the proposed methods were successfully applied to the determination of BTEX and PAHs in environmental water samples, and satisfactory recoveries (93.6-124.2% for BTEX and 77.2-113.3% for PAHs) were achieved. This study provides a benchmark for exploiting novel microporous organic polymers (MOPs) for SPME applications.

Hyper-Cross-Linked Organic Microporous Polymers Based on Alternating Copolymerization of Bismaleimide

A novel type of hyper-cross-linked organic microporous polymer (HOMP) has been successfully prepared based on the radical copolymerization of bismaleimides and divinylbenzene. In comparison with the HOMPs prepared with cross-linking techniques, the new radical strategy circumvents some intractable problems, such as low atom economy, structure irregularity and corrosive byproducts. The obtained HOMPs have defined molecular structures due to the intrinsic alternating copolymerization properties of the two monomers. A maximum BET surface area of 841 m² g^-1 and high gas capture capacity (CO₂, 11.22 wt %, 273 K/1.0 bar; H₂, 0.82 wt %, 77.3 K/1.0 bar; benzene, 545 mg g^-1, room temperature/0.6 bar; and cyclohexane, 1736 mg g^-1, room temperature/0.6 bar) were achieved. In addition, the polymers also displayed good chemical and thermal stability, which is critical for the practical application.