Effect of charge, hydrophobicity, and sequence of nucleoporins on the translocation of model particles through the nuclear pore complex

Metallacarboranes on the Road to Anticancer Therapies: Cellular Uptake, DNA Interaction, and Biological Evaluation of Cobaltabisdicarbollide [COSAN]. Chemistry 2018;24:17239-17254. [PMID: 30222214 DOI: 10.1002/chem.201803178]

After uptake by U87 MG and A375 cancer cells, cobaltabisdicarbollide [COSAN]^- distributes between membrane and nucleus and presents no relevant cytotoxicity against both cell lines even for long incubation times. The cytotoxicity of Na[COSAN] was also tested towards one normal cell line, the V79 fibroblasts, in order to ascertain the noncytotoxic profile of the compound. As the cell's nucleus contains DNA, the interaction between [COSAN]^- and double-stranded calf thymus DNA (CT-dsDNA) has been investigated. There is a strong interaction between both molecules forming a nanohybrid CT-dsDNA-[COSAN] biomaterial, which was fully characterized. Moreover, Na[COSAN] shows characteristic redox peaks ascribed to the oxidation/reduction of Co^3+/2+ at a formal potential of -1.444 V and it can be accumulated at a surface-immobilized DNA layer of glassy carbon electrodes. The equilibrium surface-binding constants (K_ox /K_red ), which confirm that [COSAN]^- interacts with DNA by an intercalative or electrostatic mode, depending on the ionic strength of the solution, were estimated. In addition, high binding affinity of Na[COSAN] to proteins was observed by ¹¹ B{¹ H} NMR and confirmed in vivo. Finally, biodistribution studies of [COSAN]^- in normal mice were run. After administration, Na[COSAN] was distributed into many organs but mainly accumulated in the reticuloendothelial system (RES), including liver and spleen. After 1 h, the formation of aggregates by plasma protein interaction plays a role in the biodistribution profile; the aggregates accumulate mostly in the lungs. Na[COSAN], which displays low toxicity and high uptake by relevant cancer cells accumulating boron within the nucleus, could act as a suitable compound for further developments as boron neutron capture therapy (BNCT) agents.

Interactions between a fluctuating polymer barrier and transport factors together with enzyme action are sufficient for selective and rapid transport through the nuclear pore complex

The nuclear pore complex, the only pathway for transport between the nucleus and cytoplasm, functions as a highly selective gate that blocks nonspecific macromolecules while allowing the rapid transport of tagged [transport factor (TF) bound] cargo up to an order of magnitude larger. The mechanism of this gate's operation is not yet fully understood and progress has been primarily hindered by the inherent complexity and multiscale nature of the problem. One needs to consider the hundreds of disordered proteins (phenylalanine glycine nucleoporins or FG nups) lining the pore, as well as their overall architecture and dynamics at the microsecond scale, while also accounting for transport at the millisecond scale across the entire pore. Here we formulate an approach that addresses transport properties over a large range of length and time scales. We do this by incorporating microscopic biophysical details, such as charge and specific TF-FG nup interactions, to compute the free energy landscape encountered by the cargo. We connect this to macroscopic transport by treating cargo translocation as a stochastic barrier crossing process and computing the current and the translocation time. We then identify distinct transport regimes (fast permeable, slow permeable, and impermeable) determined by the cargo size, TF affinity for FG nups, and the activity of the enzymes that cleave TFs from cargo. Our results, therefore provide an integrated picture of transport through the NPC, while highlighting how FG nup interactions with TFs and enzyme activity cooperate to produce selectivity and efficiency.

Effect of copolymer sequence on structure and relaxation times near a nanoparticle surface

We simulate a simple nanocomposite consisting of a single spherical nanoparticle surrounded by coarse-grained polymer chains. The polymers are composed of two different monomer types that differ only in their interaction strengths with the nanoparticle. We examine the effect of adjusting copolymer sequence on the structure as well as the end-to-end vector autocorrelation, bond vector autocorrelation, and self-intermediate scattering function relaxation times as a function of distance from the nanoparticle surface. We show how the range and magnitude of the interphase of slowed dynamics surrounding the nanoparticle depend strongly on sequence blockiness. We find that, depending on block length, blocky copolymers can have faster or slower dynamics than a random copolymer. Certain blocky copolymer sequences lead to relaxation times near the nanoparticle surface that are slower than those of either homopolymer system. Thus, tuning copolymer sequence could allow for significant control over the nanocomposite behavior.

Routes for nanoparticle translocation through polymer-brush-modified nanopores

This work presents a theoretical study of the translocation routes of nanoparticles through polymer-brush modified nanopores. The calculations were performed with a molecular theory that explicitly accounts for the shape, size, conformations and interactions of all molecular species in the system. This work reports molecular-theory calculations allowing inhomogeneities in the three spatial dimensions, which allows us to study for the first time off-axis translocation routes, i.e. routes that do not coincide with the axis of the pore. Free-energy landscapes within the pore were obtained for particles of different sizes and affinity for the polymer brush. The minimum free-energy paths on these landscapes determine the translocation routes. Decreasing the size of the particle or increasing its affinity for the polymer, shifts the translocation route from the central axis of the pore towards its walls. Interestingly, for a given polymer-particle affinity, there exists an intermediate particle size that results in the most flat potential of mean force for translocation, therefore, that will optimize the rate of translocation.

A Programmable DNA Origami Platform for Organizing Intrinsically Disordered Nucleoporins within Nanopore Confinement

Nuclear pore complexes (NPCs) form gateways that control molecular exchange between the nucleus and the cytoplasm. They impose a diffusion barrier to macromolecules and enable the selective transport of nuclear transport receptors with bound cargo. The underlying mechanisms that establish these permeability properties remain to be fully elucidated but require unstructured nuclear pore proteins rich in Phe-Gly (FG)-repeat domains of different types, such as FxFG and GLFG. While physical modeling and in vitro approaches have provided a framework for explaining how the FG network contributes to the barrier and transport properties of the NPC, it remains unknown whether the number and/or the spatial positioning of different FG-domains along a cylindrical, ∼40 nm diameter transport channel contributes to their collective properties and function. To begin to answer these questions, we have used DNA origami to build a cylinder that mimics the dimensions of the central transport channel and can house a specified number of FG-domains at specific positions with easily tunable design parameters, such as grafting density and topology. We find the overall morphology of the FG-domain assemblies to be dependent on their chemical composition, determined by the type and density of FG-repeat, and on their architectural confinement provided by the DNA cylinder, largely consistent with here presented molecular dynamics simulations based on a coarse-grained polymer model. In addition, high-speed atomic force microscopy reveals local and reversible FG-domain condensation that transiently occludes the lumen of the DNA central channel mimics, suggestive of how the NPC might establish its permeability properties.

Spatial structure of disordered proteins dictates conductance and selectivity in nuclear pore complex mimics

Nuclear pore complexes (NPCs) lined with intrinsically disordered FG-domains act as selective gatekeepers for molecular transport between the nucleus and the cytoplasm in eukaryotic cells. The underlying physical mechanism of the intriguing selectivity is still under debate. Here, we probe the transport of ions and transport receptors through biomimetic NPCs consisting of Nsp1 domains attached to the inner surface of solid-state nanopores. We examine both wildtype FG-domains and hydrophilic SG-mutants. FG-nanopores showed a clear selectivity as transport receptors can translocate across the pore whereas other proteins cannot. SG mutant pores lack such selectivity. To unravel this striking difference, we present coarse-grained molecular dynamics simulations that reveal that FG-pores exhibit a high-density, nonuniform protein distribution, in contrast to a uniform and significantly less-dense protein distribution in the SG-mutant. We conclude that the sequence-dependent density distribution of disordered proteins inside the NPC plays a key role for its conductivity and selective permeability.

Effect of Grafting on Aggregation of Intrinsically Disordered Proteins

A significant part of the proteome is composed of intrinsically disordered proteins (IDPs). These proteins do not fold into a well-defined structure and behave like ordinary polymers. In this work, we consider IDPs that have the tendency to aggregate, model them as heteropolymers that contain a small number of associating monomers, and use computer simulations to compare the aggregation of such IDPs that are grafted to a surface or free in solution. We then discuss how such grafting may affect the analysis of in vitro experiments and could also be used to suppress harmful aggregation.

Charge Influences Substrate Recognition and Self-Assembly of Hydrophobic FG Sequences

The nuclear pore complex controls the passage of molecules via hydrophobic phenylalanine-glycine (FG) domains on nucleoporins. Such FG domains consist of repeating units of FxFG, FG, or GLFG sequences, many of which are interspersed with highly charged amino acid sequences. Despite the high density of charge in certain FG domains, if and how charge influences FG-domain self-assembly and selective binding of nuclear transport receptors is largely unexplored. Using rationally designed short peptide sequences, we determined that the charge type and identity of amino acids surrounding FG sequences impact the structure and selectivity of FG-based gels. Moreover, we showed that spatial localization of the charged amino acids with respect to the FG sequence determines the degree to which charge influences hydrophobic interactions. Taken together, our study highlights that charge type and placement of amino acids regulate FG-sequence function and are important considerations when studying the mechanism of nuclear pore complex transport in vivo.

Investigating molecular crowding within nuclear pores using polarization-PALM

The key component of the nuclear pore complex (NPC) controlling permeability, selectivity, and the speed of nucleocytoplasmic transport is an assembly of natively unfolded polypeptides, which contain phenylalanine-glycine (FG) binding sites for nuclear transport receptors. The architecture and dynamics of the FG-network have been refractory to characterization due to the paucity of experimental methods able to probe the mobility and density of the FG-polypeptides and embedded macromolecules within intact NPCs. Combining fluorescence polarization, super-resolution microscopy, and mathematical analyses, we examined the rotational mobility of fluorescent probes at various locations within the FG-network under different conditions. We demonstrate that polarization PALM (p-PALM) provides a rich source of information about low rotational mobilities that are inaccessible with bulk fluorescence anisotropy approaches, and anticipate that p-PALM is well-suited to explore numerous crowded cellular environments. In total, our findings indicate that the NPC's internal organization consists of multiple dynamic environments with different local properties.

A coarse-grained computational model of the nuclear pore complex predicts Phe-Gly nucleoporin dynamics

The phenylalanine-glycine–repeat nucleoporins are essential for transport through the nuclear pore complex. Pulupa et al. observe reptation of these nucleoporins on a physiological timescale in coarse-grained computational simulations.

The phenylalanine-glycine–repeat nucleoporins (FG-Nups), which occupy the lumen of the nuclear pore complex (NPC), are critical for transport between the nucleus and cytosol. Although NPCs differ in composition across species, they are largely conserved in organization and function. Transport through the pore is on the millisecond timescale. Here, to explore the dynamics of nucleoporins on this timescale, we use coarse-grained computational simulations. These simulations generate predictions that can be experimentally tested to distinguish between proposed mechanisms of transport. Our model reflects the conserved structure of the NPC, in which FG-Nup filaments extend into the lumen and anchor along the interior of the channel. The lengths of the filaments in our model are based on the known characteristics of yeast FG-Nups. The FG-repeat sites also bind to each other, and we vary this association over several orders of magnitude and run 100-ms simulations for each value. The autocorrelation functions of the orientation of the simulated FG-Nups are compared with in vivo anisotropy data. We observe that FG-Nups reptate back and forth through the NPC at timescales commensurate with experimental measurements of the speed of cargo transport through the NPC. Our results are consistent with models of transport where FG-Nup filaments are free to move across the central channel of the NPC, possibly informing how cargo might transverse the NPC.

Protein Transport by the Nuclear Pore Complex: Simple Biophysics of a Complex Biomachine

In eukaryotic cells, transport of molecules between the nucleus and the cytoplasm is facilitated by highly selective and efficient biomachines known as nuclear pore complexes (NPCs). The structural details of NPCs vary across species, with many of their constituent proteins exhibiting relatively low sequence conservation; yet the NPC as a whole retains its general architecture and mechanism of action in all eukaryotes from yeast to humans. This functional conservation in the absence of precise molecular conservation suggests that many aspects of the NPC transport mechanism may be understood based on general biophysical considerations. Accordingly, some aspects of NPC function have been recapitulated in artificial nanochannel mimics, even though they lack certain molecular elements of the endogenous NPC. Herein, we review biophysical aspects of NPC architecture and function and cover recent progress in the field. We also review recent advances in man-made molecular filters inspired by NPCs, and their applications in nanotechnology. We conclude the review with an outlook on outstanding questions in the field and biomedical aspects of NPC transport.

Looking "Under the Hood" of Cellular Mechanotransduction with Computational Tools: A Systems Biomechanics Approach across Multiple Scales

Signal modulation has been developed in living cells throughout evolution to promote utilizing the same machinery for multiple cellular functions. Chemical and mechanical modules of signal transmission and transduction are interconnected and necessary for organ development and growth. However, due to the high complexity of the intercommunication of physical intracellular connections with biochemical pathways, there are many missing details in our overall understanding of mechanotransduction processes, i.e., the process by which mechanical signals are converted to biochemical cascades. Cell-matrix adhesions are mechanically coupled to the nucleus through the cytoskeleton. This modulated and tightly integrated network mediates the transmission of mechanochemical signals from the extracellular matrix to the nucleus. Various experimental and computational techniques have been utilized to understand the basic mechanisms of mechanotransduction, yet many aspects have remained elusive. Recently, in silico experiments have made important contributions to the field of mechanobiology. Herein, computational modeling efforts devoted to understanding integrin-mediated mechanotransduction pathways are reviewed, and an outlook is presented for future directions toward using suitable computational approaches and developing novel techniques for addressing important questions in the field of mechanotransduction.

The particle in the spider's web: transport through biological hydrogels

Biological hydrogels such as mucus, extracellular matrix, biofilms, and the nuclear pore have diverse functions and compositions, but all act as selectively permeable barriers to the diffusion of particles. Each barrier has a crosslinked polymeric mesh that blocks penetration of large particles such as pathogens, nanotherapeutics, or macromolecules. These polymeric meshes also employ interactive filtering, in which affinity between solutes and the gel matrix controls permeability. Interactive filtering affects the transport of particles of all sizes including peptides, antibiotics, and nanoparticles and in many cases this filtering can be described in terms of the effects of charge and hydrophobicity. The concepts described in this review can guide strategies to exploit or overcome gel barriers, particularly for applications in diagnostics, pharmacology, biomaterials, and drug delivery.

Structural dynamics of the nuclear pore complex

Nuclear pore complexes (NPCs) are the sole conduits that facilitate macromolecular exchange between the nucleus and cytosol. Recent advancements have led to a more highly resolved NPC structure. However, our understanding of the NPC modus operandi that facilitates transport selectivity, and speed, of diverse cargoes remains incomplete. For the most part, assorted cargo-complexes of different sizes traverse the NPC central channel in milliseconds, yet little is known about the nanoscopic movements of its barrier-forming Phe-Gly nucleoporins (FG Nups) and related sub-structures at transport-relevant time and length scales. Here, we discuss how dynamic FG Nup behavior may confer NPCs with an effective permeability barrier according to the functional needs of the cell. Moreover, we postulate that structural flexibility might resonate throughout the NPC framework from the cytoplasmic filaments to the nuclear basket.

Design of Multifunctional Nanogate in Response to Multiple External Stimuli Using Amphiphilic Diblock Copolymer

Nature uses the interplay between hydrophobic and electrostatic interactions of disordered proteins to orchestrate complicated molecular gates such as the nuclear pore complex to control the transport of biological masses. Inspired by nature, we here theoretically show that well-defined gate shape, sensitive response to pH and salt concentration, and selectivity in cargo transport can be simultaneously achieved by grafting amphiphilic diblock copolymers made of sequence-controlled hydrophobic and ionizable monomers on the inner surface of solid-state nanopore. As a result, multiple functions such as ionic gating and molecular filtering can be implemented into one single copolymer nanogate. The gate structure and thermodynamics is a result of the self-assembly of the sequence-designed copolymer in the confined geometry that minimizes the free energy of the system. Our theory further predicts a phase transition and discontinuous charge regulation of the confined copolymer that allows logical gating in biosensors and nanofluidic devices. As an example of application, a nanolocker with the potential of molecular pumping has also been designed with the cooperation of two amphiphilic copolymer gates. Our results highlight the importance of polymer sequence in nanogating, and these insights can be used to guide the rational design of polymer-coated smart nanopores.

Cooperative Interactions between Different Classes of Disordered Proteins Play a Functional Role in the Nuclear Pore Complex of Baker's Yeast

Nucleocytoplasmic transport is highly selective, efficient, and is regulated by a poorly understood mechanism involving hundreds of disordered FG nucleoporin proteins (FG nups) lining the inside wall of the nuclear pore complex (NPC). Previous research has concluded that FG nups in Baker's yeast (S. cerevisiae) are present in a bimodal distribution, with the "Forest Model" classifying FG nups as either di-block polymer like "trees" or single-block polymer like "shrubs". Using a combination of coarse-grained modeling and polymer brush modeling, the function of the di-block FG nups has previously been hypothesized in the Di-block Copolymer Brush Gate (DCBG) model to form a higher-order polymer brush architecture which can open and close to regulate transport across the NPC. In this manuscript we work to extend the original DCBG model by first performing coarse grained simulations of the single-block FG nups which confirm that they have a single block polymer structure rather than the di-block structure of tree nups. Our molecular simulations also demonstrate that these single-block FG nups are likely cohesive, compact, collapsed coil polymers, implying that these FG nups are generally localized to their grafting location within the NPC. We find that adding a layer of single-block FG nups to the DCBG model increases the range of cargo sizes which are able to translocate the pore through a cooperative effect involving single-block and di-block FG nups. This effect can explain the puzzling connection between single-block FG nup deletion mutants in S. cerevisiae and the resulting failure of certain large cargo transport through the NPC. Facilitation of large cargo transport via single-block and di-block FG nup cooperativity in the nuclear pore could provide a model mechanism for designing future biomimetic pores of greater applicability.

Gated Molecular Transport in Highly Ordered Heterogeneous Nanochannel Array Electrode

In biology, all protein channels share a common feature of containing narrow pore regions with hydrophobic functional groups and selectivity filter regions abundant with charged residues, which work together to account for fast and selective mass transport in and out of cells. In this work, an ultrathin layer of polydimethylsiloxane (PDMS) was evaporated on the top orifices of charged silica nanochannels (2-3 nm in diameter and 60 nm in length) vertically attached to the electrode surface, and the resulting structure is designated as heterogeneous silica nanochannels (HSNs). As evidenced by voltammetric studies, the transport of ionic species in these HSNs was controlled by both hydrophobic rejection and electrostatic force arising from the top PDMS layer and from the bottom silica nanochannels, respectively. Anionic species encountered both hydrophobic rejection and electrostatic repulsion forces, and thus, their transport was strongly prohibited, while the transport of cationic species was permitted once the electrostatic attraction exceeded the hydrophobic rejection. Moreover, the magnitude of hydrophobic force could be regulated by the PDMS layer thickness, and that of the electrostatic force can be modulated by the salt concentration, solution pH, or applied voltage. It was demonstrated that the HSNs could be activated from an OFF state (no ion can transport) to an ON state (only cation transport occurs) by decreasing the salt concentration, increasing the solution pH, or applying negative voltages.

Simple rules for passive diffusion through the nuclear pore complex

Passive macromolecular diffusion through nuclear pore complexes is thought to decrease dramatically beyond ∼40 kD. Using time-resolved fluorescence microscopy and Brownian dynamics simulations, Timney et al. show that this barrier is in fact much softer, decreasing along a continuum.

Passive macromolecular diffusion through nuclear pore complexes (NPCs) is thought to decrease dramatically beyond a 30–60-kD size threshold. Using thousands of independent time-resolved fluorescence microscopy measurements in vivo, we show that the NPC lacks such a firm size threshold; instead, it forms a soft barrier to passive diffusion that intensifies gradually with increasing molecular mass in both the wild-type and mutant strains with various subsets of phenylalanine-glycine (FG) domains and different levels of baseline passive permeability. Brownian dynamics simulations replicate these findings and indicate that the soft barrier results from the highly dynamic FG repeat domains and the diffusing macromolecules mutually constraining and competing for available volume in the interior of the NPC, setting up entropic repulsion forces. We found that FG domains with exceptionally high net charge and low hydropathy near the cytoplasmic end of the central channel contribute more strongly to obstruction of passive diffusion than to facilitated transport, revealing a compartmentalized functional arrangement within the NPC.

The selective permeability barrier in the nuclear pore complex

The nuclear pore complex (NPC) mediates the shuttle transport of macromolecules between the nucleus and cytoplasm in eukaryotic cells. The permeability barrier formed by intrinsically disordered phenylalanine-glycine-rich nucleoporins (FG-Nups) in the NPC functions as the critical selective control for nucleocytoplasmic transport. Signal-independent small molecules (< 40 kDa) passively diffuse through the pore, but passage of large cargo molecules is inhibited unless they are chaperoned by nuclear transport receptors (NTRs). NTRs are capable of interacting with FG-Nups and guide the cargos to cross the barrier by facilitated diffusion. The native conformation of the FG-Nups permeability barrier and the competition among multiple NTRs interacting with this barrier in the native NPCs are the 2 core questions still being highly debated in the field. Recently, we applied high-speed super-resolution fluorescence microscopy to map out the natural structure of the FG-Nups barrier and determined the competition among multiple NTRs as they interact with the barrier in the native NPCs. In this extra-view article, we will review the current understanding in the configuration and function of FG-Nups barrier and highlight the new evidence obtained recently to answer the core questions in nucleocytoplasmic transport.

Spatiotemporal dynamics of the nuclear pore complex transport barrier resolved by high-speed atomic force microscopy

Nuclear pore complexes (NPCs) are biological nanomachines that mediate the bidirectional traffic of macromolecules between the cytoplasm and nucleus in eukaryotic cells. This process involves numerous intrinsically disordered, barrier-forming proteins known as phenylalanine-glycine nucleoporins (FG Nups) that are tethered inside each pore. The selective barrier mechanism has so far remained unresolved because the FG Nups have eluded direct structural analysis within NPCs. Here, high-speed atomic force microscopy is used to visualize the nanoscopic spatiotemporal dynamics of FG Nups inside Xenopus laevis oocyte NPCs at timescales of ∼100 ms. Our results show that the cytoplasmic orifice is circumscribed by highly flexible, dynamically fluctuating FG Nups that rapidly elongate and retract, consistent with the diffusive motion of tethered polypeptide chains. On this basis, intermingling FG Nups exhibit transient entanglements in the central channel, but do not cohere into a tightly crosslinked meshwork. Therefore, the basic functional form of the NPC barrier is comprised of highly dynamic FG Nups that manifest as a central plug or transporter when averaged in space and time.

Rapid Brownian Motion Primes Ultrafast Reconstruction of Intrinsically Disordered Phe-Gly Repeats Inside the Nuclear Pore Complex

Conformational behavior of intrinsically disordered proteins, such as Phe-Gly repeat domains, alters drastically when they are confined in, and tethered to, nan channels. This has challenged our understanding of how they serve to selectively facilitate translocation of nuclear transport receptor (NTR)-bearing macromolecules. Heterogeneous FG-repeats, tethered to the NPC interior, nonuniformly fill the channel in a diameter-dependent manner and adopt a rapid Brownian motion, thereby forming a porous and highly dynamic polymeric meshwork that percolates in radial and axial directions and features two distinguishable zones: a dense hydrophobic rod-like zone located in the center, and a peripheral low-density shell-like zone. The FG-meshwork is locally disrupted upon interacting with NTR-bearing macromolecules, but immediately reconstructs itself between 0.44 μs and 7.0 μs, depending on cargo size and shape. This confers a perpetually-sealed state to the NPC, and is solely due to rapid Brownian motion of FG-repeats, not FG-repeat hydrophobic bonds. Elongated-shaped macromolecules, both in the presence and absence of NTRs, penetrate more readily into the FG-meshwork compared to their globular counterparts of identical volume and surface chemistry, highlighting the importance of the shape effects in nucleocytoplasmic transport. These results can help our understanding of geometrical effects in, and the design of, intelligent and responsive biopolymer-based materials in nanofiltration and artificial nanopores.

Core-shell nanocarriers with high paclitaxel loading for passive and active targeting

Rapid blood clearance and premature burst release are inherent drawbacks of conventional nanoparticles, resulting in poor tumor selectivity. iRGD peptide is widely recognized as an efficient cell membrane penetration peptide homing to αVβ3 integrins. Herein, core-shell nanocapsules (NCs) and iRGD-modified NCs (iRGD-NCs) with high drug payload for paclitaxel (PTX) were prepared to enhance the antitumor activities of chemotherapy agents with poor water solubility. Improved in vitro and in vivo tumor targeting and penetration were observed with NCs and iRGD-NCs; the latter exhibited better antitumor activity because iRGD enhanced the accumulation and penetration of NCs in tumors. The NCs were cytocompatible, histocompatible, and non-toxic to other healthy tissues. The endocytosis of NCs was mediated by lipid rafts in an energy-dependent manner, leading to better cytotoxicity of PTX against cancer cells. In contrast with commercial product, PTX-loaded NCs (PTX-NCs) increased area under concentration-time curve (AUC) by about 4-fold, prolonged mean resident time (MRT) by more than 8-fold and reduced the elimination rate constant by greater than 68-fold. In conclusion, the present nanocarriers with high drug-loading capacity represent an efficient tumor-targeting drug delivery system with promising potential for cancer therapy.

Design strategy of surface decoration for efficient delivery of nanoparticles by computer simulation

Understanding the role of surface decoration of nanoparticles in protein adsorption and cellular uptake is of great importance in biomedicine. Here, by using dissipative particle dynamics simulations, we take two typical coating polymers (i.e., hydrophilic and zwitterionic polymers) as an example, and systematically investigate their effect on cellular delivery of hydrophobic and charged nanoparticles (in the presence of serum protein). Our results show that though two types of polymers are charge-neutral and can both reduce the protein adsorption, there exist some differences between their ability of protein resistance, especially in the case of positively charged nanoparticles. Besides, it is found that the coating polymers may also greatly decrease the cellular uptake efficiency of nanoparticles. Nevertheless, and importantly, since the zwitterionic polymers may become positively charged under low pH environments, the nanoparticle can attach onto cell membrane more firmly than that coated with hydrophilic polymers, which can further enhance the active targeting of nanoparticles. Finally, we also provide the design maps for surface decoration to achieve efficient cellular delivery. These results can help better understand how to keep the balance between protein resistance and cell targeting, which may give some useful guidelines on optimal design of future nanomaterials in drug delivery.

Simple biophysics underpins collective conformations of the intrinsically disordered proteins of the Nuclear Pore Complex

Nuclear Pore Complexes (NPCs) are key cellular transporter that control nucleocytoplasmic transport in eukaryotic cells, but its transport mechanism is still not understood. The centerpiece of NPC transport is the assembly of intrinsically disordered polypeptides, known as FG nucleoporins, lining its passageway. Their conformations and collective dynamics during transport are difficult to assess in vivo. In vitro investigations provide partially conflicting results, lending support to different models of transport, which invoke various conformational transitions of the FG nucleoporins induced by the cargo-carrying transport proteins. We show that the spatial organization of FG nucleoporin assemblies with the transport proteins can be understood within a first principles biophysical model with a minimal number of key physical variables, such as the average protein interaction strengths and spatial densities. These results address some of the outstanding controversies and suggest how molecularly divergent NPCs in different species can perform essentially the same function.

DOI:http://dx.doi.org/10.7554/eLife.10785.001

Animal, plant and fungal cells contain a structure called the nucleus, inside which the genetic material of the cell is stored. For the cell to work properly, certain proteins and other molecules need to be able to enter and exit the nucleus. This transport is carried out by pore-like molecular “devices” known as Nuclear Pore Complexes, whose architecture and mode of operation are unique among cellular transporters.

Nuclear Pore Complexes are charged with a daunting task of deciding which of the hundreds of molecules it conducts per second should go through and which should not. Small molecules can pass freely through Nuclear Pore Complexes. However, larger molecules can only pass through the pore efficiently if they are bound to specialized transport proteins that interact with the proteins – called FG nucleoporins – that line the pore. A unique feature of the FG nucleoporins is that, unlike typical proteins, they do not have a defined three-dimensional structure. Instead, they form a soft and pliable lining inside the Nuclear Pore Complex passageway.

Exactly how interacting with transport proteins affects the structure and spatial arrangements of the FG nucleoporins in a way that allows them to control transport is not well understood. This is in part because existing experimental techniques are unable to study the structures of the FG nucleoporins in enough detail to track how they change during transport. The complexity and the diversity of the FG nucleoporins also make them difficult to model in detail.

Vovk, Gu et al. have developed a theoretical model that is based on just three basic physical properties of the FG nucleoporins – their flexibility, their ability to interact with each other, and their binding with the transport proteins. Future work can refine the model by incorporating further molecular details about the interactions between FG nucleoporins and transport proteins.

The predictions made by this simple model agree well with experimental results in a wide range of situations – from single molecules to complex spatial assemblies. They also explain why some of the experimental results appear to contradict each other and suggest how several outstanding controversies in the field can be reconciled. Because the model invokes only fundamental physical principles of FG nucleoporin assemblies, it shows that some of their general properties do not depend on the exact conditions. In particular, this might shed light on why Nuclear Pore Complexes in different organisms perform essentially the same function, although the details of their molecular structure may differ. This also suggests how the FG nucleoporins can be manipulated to build artificial devices based on the same principles.

DOI:http://dx.doi.org/10.7554/eLife.10785.002

What is the role of curvature on the properties of nanomaterials for biomedical applications?

The use of nanomaterials for drug delivery and theranostics applications is a promising paradigm in nanomedicine, as it brings together the best features of nanotechnolgy, molecular biology, and medicine. To fully exploit the synergistic potential of such interdisciplinary strategy, a comprehensive description of the interactions at the interface between nanomaterials and biological systems is not only crucial, but also mandatory. Routine strategies to engineer nanomaterial-based drugs comprise modifying their surface with biocompatible and targeting ligands, in many cases resorting to modular approaches that assume additive behavior. However, emergent behavior can be observed when combining confinement and curvature. The final properties of functionalized nanomaterials become dependent not only on the properties of their constituents but also on the geometry of the nano-bio interface, and on the local molecular environment. Modularity no longer holds, and the coupling between interactions, chemical equilibrium, and molecular organization has to be directly addressed in order to design smart nanomaterials with controlled spatial functionalization envisioning optimized biomedical applications. Nanoparticle's curvature becomes an integral part of the design strategy, enabling to control and engineer the chemical and surface properties with molecular precision. Understanding how nanoparticle size, morphology, and surface chemistry are interrelated will put us one step closer to engineering nanobiomaterials capable of mimicking biological structures and their behaviors, paving the way into applications and the possibility to elucidate the use of curvature by biological systems. WIREs Nanomed Nanobiotechnol 2016, 8:334-354. doi: 10.1002/wnan.1365 For further resources related to this article, please visit the WIREs website.

Slide-and-exchange mechanism for rapid and selective transport through the nuclear pore complex

Nucleocytoplasmic transport is mediated by the interaction of transport factors (TFs) with disordered phenylalanine-glycine (FG) repeats that fill the central channel of the nuclear pore complex (NPC). However, the mechanism by which TFs rapidly diffuse through multiple FG repeats without compromising NPC selectivity is not yet fully understood. In this study, we build on our recent NMR investigations showing that FG repeats are highly dynamic, flexible, and rapidly exchanging among TF interaction sites. We use unbiased long timescale all-atom simulations on the Anton supercomputer, combined with extensive enhanced sampling simulations and NMR experiments, to characterize the thermodynamic and kinetic properties of FG repeats and their interaction with a model transport factor. Both the simulations and experimental data indicate that FG repeats are highly dynamic random coils, lack intrachain interactions, and exhibit significant entropically driven resistance to spatial confinement. We show that the FG motifs reversibly slide in and out of multiple TF interaction sites, transitioning rapidly between a strongly interacting state and a weakly interacting state, rather than undergoing a much slower transition between strongly interacting and completely noninteracting (unbound) states. In the weakly interacting state, FG motifs can be more easily displaced by other competing FG motifs, providing a simple mechanism for rapid exchange of TF/FG motif contacts during transport. This slide-and-exchange mechanism highlights the direct role of the disorder within FG repeats in nucleocytoplasmic transport, and resolves the apparent conflict between the selectivity and speed of transport.

A physical model describing the interaction of nuclear transport receptors with FG nucleoporin domain assemblies

The permeability barrier of nuclear pore complexes (NPCs) controls bulk nucleocytoplasmic exchange. It consists of nucleoporin domains rich in phenylalanine-glycine motifs (FG domains). As a bottom-up nanoscale model for the permeability barrier, we have used planar films produced with three different end-grafted FG domains, and quantitatively analyzed the binding of two different nuclear transport receptors (NTRs), NTF2 and Importin β, together with the concomitant film thickness changes. NTR binding caused only moderate changes in film thickness; the binding isotherms showed negative cooperativity and could all be mapped onto a single master curve. This universal NTR binding behavior - a key element for the transport selectivity of the NPC - was quantitatively reproduced by a physical model that treats FG domains as regular, flexible polymers, and NTRs as spherical colloids with a homogeneous surface, ignoring the detailed arrangement of interaction sites along FG domains and on the NTR surface.

How successful is nuclear targeting by nanocarriers?

The nucleus is ultimately the final target for many therapeutics treating various disorders including cancers, heart dysfunction and brain disorders. Owing to their specialized cell uptake and trafficking mechanisms, nanoparticles (NPs) allow drug targeting where degradation sensitive therapeutics could be delivered to their target tissues and cell in active form and sufficient concentration. However, it has recently become increasingly obvious that cytosolic internalization of a drug molecule does not entail its interaction with its subcellular target and hence careful nanoparticle design and optimization is required to enable nuclear targeting. This review, discusses the barriers to NP nuclear delivery; crossing the cell membrane, endo/lysosomal escape, cytoplasmic trafficking and finally nuclear entry focusing on how NP synthesis and modification could allow for bypassing each of the aforementioned barriers and successfully reaching the nucleus. Examples of nuclear targeted NPs are also discussed, stressing on the critical aspects of nuclear targeting and pointing out how the disease state might change the normal NP path and how such change could be exploited to increase efficiency of nuclear targeting. Finally, the criteria set for the evaluation of nanocarriers for nuclear delivery are discussed highlighting that quantitative rather than qualitative evaluation is required to evaluate how successful nanocarriers for nuclear delivery are, particularly with regards to the amount of drug delivered and released in the nucleus.

Deciphering the Structure and Function of Nuclear Pores Using Single-Molecule Fluorescence Approaches

Due to its central role in macromolecular trafficking and nucleocytoplasmic information transfer, the nuclear pore complex (NPC) has been studied in great detail using a wide spectrum of methods. Consequently, many aspects of its architecture, general function, and role in the life cycle of a cell are well understood. Over the last decade, fluorescence microscopy methods have enabled the real-time visualization of single molecules interacting with and transiting through the NPC, allowing novel questions to be examined with nanometer precision. While initial single-molecule studies focused primarily on import pathways using permeabilized cells, it has recently proven feasible to investigate the export of mRNAs in living cells. Single-molecule assays can address questions that are difficult or impossible to answer by other means, yet the complexity of nucleocytoplasmic transport requires that interpretation be based on a firm genetic, biochemical, and structural foundation. Moreover, conceptually simple single-molecule experiments remain technically challenging, particularly with regard to signal intensity, signal-to-noise ratio, and the analysis of noise, stochasticity, and precision. We discuss nuclear transport issues recently addressed by single-molecule microscopy, evaluate the limits of existing assays and data, and identify open questions for future studies. We expect that single-molecule fluorescence approaches will continue to be applied to outstanding nucleocytoplasmic transport questions, and that the approaches developed for NPC studies are extendable to additional complex systems and pathways within cells.

Dynamic Protein Interaction Networks and New Structural Paradigms in Signaling

Understanding signaling and other complex biological processes requires elucidating the critical roles of intrinsically disordered proteins (IDPs) and regions (IDRs), which represent ∼30% of the proteome and enable unique regulatory mechanisms. In this review, we describe the structural heterogeneity of disordered proteins that underpins these mechanisms and the latest progress in obtaining structural descriptions of conformational ensembles of disordered proteins that are needed for linking structure and dynamics to function. We describe the diverse interactions of IDPs that can have unusual characteristics such as "ultrasensitivity" and "regulated folding and unfolding". We also summarize the mounting data showing that large-scale assembly and protein phase separation occurs within a variety of signaling complexes and cellular structures. In addition, we discuss efforts to therapeutically target disordered proteins with small molecules. Overall, we interpret the remodeling of disordered state ensembles due to binding and post-translational modifications within an expanded framework for allostery that provides significant insights into how disordered proteins transmit biological information.

Energetics of Transport through the Nuclear Pore Complex

Molecular transport across the nuclear envelope in eukaryotic cells is solely controlled by the nuclear pore complex (NPC). The NPC provides two types of nucleocytoplasmic transport: passive diffusion of small molecules and active chaperon-mediated translocation of large molecules. It has been shown that the interaction between intrinsically disordered proteins that line the central channel of the NPC and the transporting cargoes is the determining factor, but the exact mechanism of transport is yet unknown. Here, we use coarse-grained molecular dynamics simulations to quantify the energy barrier that has to be overcome for molecules to pass through the NPC. We focus on two aspects of transport. First, the passive transport of model cargo molecules with different sizes is studied and the size selectivity feature of the NPC is investigated. Our results show that the transport probability of cargoes is significantly reduced when they are larger than ∼5 nm in diameter. Secondly, we show that incorporating hydrophobic binding spots on the surface of the cargo effectively decreases the energy barrier of the pore. Finally, a simple transport model is proposed which characterizes the energy barrier of the NPC as a function of diameter and hydrophobicity of the transporting particles.

Nucleoporin's Like Charge Regions Are Major Regulators of FG Coverage and Dynamics Inside the Nuclear Pore Complex

Nucleocytoplasmic transport has been the subject of a large body of research in the past few decades. Recently, the focus of investigations in this field has shifted from studies of the overall function of the nuclear pore complex (NPC) to the examination of the role of different domains of phenylalanine-glycine nucleoporin (FG Nup) sequences on the NPC function. In our recent bioinformatics study, we showed that FG Nups have some evolutionarily conserved sequence-based features that might govern their physical behavior inside the NPC. We proposed the ‘like charge regions’ (LCRs), sequences of charged residues with only one type of charge, as one of the features that play a significant role in the formation of FG network inside the central channel. In this study, we further explore the role of LCRs in the distribution of FG Nups, using a recently developed coarse-grained molecular dynamics model. Our results demonstrate how LCRs affect the formation of two transport pathways. While some FG Nups locate their FG network at the center of the NPC forming a homogeneous meshwork of FG repeats, other FG Nups cover the space adjacent to the NPC wall. LCRs in the former group, i.e. FG Nups that form an FG domain at the center, tend to regulate the size of the highly dense, doughnut-shaped FG meshwork and leave a small low FG density area at the center of the pore for passive diffusion. On the other hand, LCRs in the latter group of FG Nups enable them to maximize their interactions and cover a larger space inside the NPC to increase its capability to transport numerous cargos at the same time. Finally, a new viewpoint is proposed that reconciles different models for the nuclear pore selective barrier function.

Evolutionarily Conserved Sequence Features Regulate the Formation of the FG Network at the Center of the Nuclear Pore Complex

The nuclear pore complex (NPC) is the portal for bidirectional transportation of cargos between the nucleus and the cytoplasm. While most of the structural elements of the NPC, i.e. nucleoporins (Nups), are well characterized, the exact transport mechanism is still under much debate. Many of the functional Nups are rich in phenylalanine-glycine (FG) repeats and are believed to play the key role in nucleocytoplasmic transport. We present a bioinformatics study conducted on more than a thousand FG Nups across 252 species. Our results reveal the regulatory role of polar residues and specific sequences of charged residues, named 'like charge regions' (LCRs), in the formation of the FG network at the center of the NPC. Positively charged LCRs prepare the environment for negatively charged cargo complexes and regulate the size of the FG network. The low number density of charged residues in these regions prevents FG domains from forming a relaxed coil structure. Our results highlight the significant role of polar interactions in FG network formation at the center of the NPC and demonstrate that the specific localization of LCRs, FG motifs, charged, and polar residues regulate the formation of the FG network at the center of the NPC.

Molecular and Thermodynamic Factors Explain the Passivation Properties of Poly(ethylene glycol)-Coated Substrate Surfaces against Fluorophore-Labeled DNA Oligonucleotides

Poly(ethylene glycol) (PEG) nanofilms are used to avert the nonspecific binding of biomolecules on substrate surfaces in biomedicine and bioanalysis including modern fluorescence-based DNA sensing and sequencing chips. A fundamental and coherent understanding of the interactions between fluorophore-tagged DNA, PEG-films, and substrates in terms of molecular and energetic factors is, however, missing. Here we explore a large parameter space to elucidate how PEG layers passivate metal oxide surfaces against Cy3-labeled DNA probes. The driving force for probe adsorption is found to be the affinity of the fluorophore to the substrate, while the high-quality PEG films prevent adsorption to bare ITO surfaces. The amount of nonrepelled, surface-bound DNA strongly depends on oligonucleotide size, PEG chain length, and incubation temperature. To explain these observations, we develop an experimentally validated theory to provide a microscopic picture of the PEG layer and show that adsorbed DNA molecules reside within the film by end-tethering the fluorophore to the ITO surface. To compensate for the local accumulation of negatively charged DNA, counterions condense on the adsorbed probes within the layer. The model furthermore explains that surface passivation is governed by the interdependence of molecular size, conformation, charge, ion condensation, and environmental conditions. We finally report for the first time on the detailed thermodynamic values that show how adsorption results from a balance between large opposing energetic factors. The insight of our study can be applied to rationally engineer PEG nanolayers for improved functional performance in DNA analysis schemes and may be expanded to other polymeric thin films.

Novel delivery approaches for cancer therapeutics

Currently, a majority of cancer treatment strategies are based on the removal of tumor mass mainly by surgery. Chemical and physical treatments such as chemo- and radiotherapies have also made a major contribution in inhibiting rapid growth of malignant cells. Furthermore, these approaches are often combined to enhance therapeutic indices. It is widely known that surgery, chemo- and radiotherapy also inhibit normal cells growth. In addition, these treatment modalities are associated with severe side effects and high toxicity which in turn lead to low quality of life. This review encompasses novel strategies for more effective chemotherapeutic delivery aiming to generate better prognosis. Currently, cancer treatment is a highly dynamic field and significant advances are being made in the development of novel cancer treatment strategies. In contrast to conventional cancer therapeutics, novel approaches such as ligand or receptor based targeting, triggered release, intracellular drug targeting, gene delivery, cancer stem cell therapy, magnetic drug targeting and ultrasound-mediated drug delivery, have added new modalities for cancer treatment. These approaches have led to selective detection of malignant cells leading to their eradication with minimal side effects. Lowering multi-drug resistance and involving influx transportation in targeted drug delivery to cancer cells can also contribute significantly in the therapeutic interventions in cancer.

A Polymer-Brush-Based Nanovalve Controlled by Nanoparticle Additives: Design Principles

Polymer-grafted surfaces and channels are increasingly used for the design of responsive materials and sensors due to robust performance and ease of use. Various strategies for the control of the nanoscale morphologies of such materials and devices are being tested. Entropic repulsion between the polymer chains in a grafted brush of sufficient density causes the chains to extend in the direction perpendicular to the grafting surface in comparison to the position of unattached polymers. When nanoparticles having attractive interactions with the polymers are introduced into the solvent, these nanoparticles tend to infiltrate into the brush and reduce its extension. Under certain conditions, a sharp reduction in brush height extension can occur over a narrow range of nanoparticle concentrations in solution. We describe a way of controlling transport through polymer-functionalized nanochannels with nanoparticle additives, relying on the physics of nanoparticles and polymer brushes under confinement, and we suggest a blueprint for the creation of a tunable nanovalve. The nanovalve is modeled as a cylinder with a polymer brush grafted on its inside surface. Brush properties such as the chain length and the grafting density are chosen so that the brush chains extend into the center of the cylinder in the absence of nanoparticles, occluding the flux of analyte molecules through the pore. When nanoparticles that are attracted to the polymers are introduced into solution, they infiltrate into the brush and partially collapse it against the cylindrical grafting surface, opening space in the center of the cylinder through which analyte molecules can flow. The operation of such a nanovalve is analyzed via self-consistent field theory calculations in the strong-stretching approximation. Self-consistent field analysis is supported by Langevin dynamics simulations of the underlying coarse-grained model of the polymer-nanoparticle system.

Theoretical and computational investigations of nanoparticle-biomembrane interactions in cellular delivery

With the rapid development of nanotechnology, nanoparticles have been widely used in many applications such as phototherapy, cell imaging, and drug/gene delivery. A better understanding of how nanoparticles interact with bio-system (especially cells) is of great importance for their potential biomedical applications. In this review, the current status and perspective of theoretical and computational investigations is presented on the nanoparticle-biomembrane interactions in cellular delivery. In particular, the determining parameters (including the properties of nanoparticles, cell membranes and environments) that govern the cellular uptake of nanoparticles (direct penetration and endocytosis) are discussed. Further, some special attention is paid to their interactions beyond the translocation of nanoparticles across membranes (e.g., nanoparticles escaping from endosome and entering into nucleus). Finally, a summary is given, and the challenging problems of this field in the future are identified.

Probing the disordered domain of the nuclear pore complex through coarse-grained molecular dynamics simulations

The distribution of disordered proteins (FG-nups) that line the transport channel of the nuclear pore complex (NPC) is investigated by means of coarse-grained molecular dynamics simulations. A one-bead-per-amino-acid model is presented that accounts for the hydrophobic/hydrophilic and electrostatic interactions between different amino acids, polarity of the solvent, and screening of free ions. The results indicate that the interaction of the FG-nups forms a high-density, doughnut-like distribution inside the NPC, which is rich in FG-repeats. We show that the obtained distribution is encoded in the amino-acid sequence of the FG-nups and is driven by both electrostatic and hydrophobic interactions. To explore the relation between structure and function, we have systematically removed different combinations of FG-nups from the pore to simulate inviable and viable NPCs that were previously studied experimentally. The obtained density distributions show that the maximum density of the FG-nups inside the pore does not exceed 185 mg/mL in the inviable NPCs, whereas for the wild-type and viable NPCs, this value increases to 300 mg/mL. Interestingly, this maximum density is not correlated to the total mass of the FG-nups, but depends sensitively on the specific combination of essential Nups located in the central plane of the NPC.

Nanoscale stiffness topography reveals structure and mechanics of the transport barrier in intact nuclear pore complexes

The nuclear pore complex (NPC) is the gate for transport between the cell nucleus and the cytoplasm. Small molecules cross the NPC by passive diffusion, but molecules larger than ∼5 nm must bind to nuclear transport receptors to overcome a selective barrier within the NPC. Although the structure and shape of the cytoplasmic ring of the NPC are relatively well characterized, the selective barrier is situated deep within the central channel of the NPC and depends critically on unstructured nuclear pore proteins, and is therefore not well understood. Here, we show that stiffness topography with sharp atomic force microscopy tips can generate nanoscale cross-sections of the NPC. The cross-sections reveal two distinct structures, a cytoplasmic ring and a central plug structure, which are consistent with the three-dimensional NPC structure derived from electron microscopy. The central plug persists after reactivation of the transport cycle and resultant cargo release, indicating that the plug is an intrinsic part of the NPC barrier. Added nuclear transport receptors accumulate on the intact transport barrier and lead to a homogenization of the barrier stiffness. The observed nanomechanical properties in the NPC indicate the presence of a cohesive barrier to transport and are quantitatively consistent with the presence of a central condensate of nuclear pore proteins in the NPC channel.

Karyopherin-centric control of nuclear pores based on molecular occupancy and kinetic analysis of multivalent binding with FG nucleoporins

Intrinsically disordered Phe-Gly nucleoporins (FG Nups) within nuclear pore complexes exert multivalent interactions with transport receptors (Karyopherins (Kaps)) that orchestrate nucleocytoplasmic transport. Current FG-centric views reason that selective Kap translocation is promoted by alterations in the barrier-like FG Nup conformations. However, the strong binding of Kaps with the FG Nups due to avidity contradicts rapid Kap translocation in vivo. Here, using surface plasmon resonance, we innovate a means to correlate in situ mechanistic (molecular occupancy and conformational changes) with equilibrium (binding affinity) and kinetic (multivalent binding kinetics) aspects of Karyopherinβ1 (Kapβ1) binding to four different FG Nups. A general feature of the FxFG domains of Nup214, Nup62, and Nup153 is their capacity to extend and accommodate large numbers of Kapβ1 molecules at physiological Kapβ1 concentrations. A notable exception is the GLFG domain of Nup98, which forms a partially penetrable cohesive layer. Interestingly, we find that a slowly exchanging Kapβ1 phase forms an integral constituent within the FG Nups that coexists with a fast phase, which dominates transport kinetics due to limited binding with the pre-occupied FG Nups at physiological Kapβ1 concentrations. Altogether, our data reveal an emergent Kap-centric barrier mechanism that may underlie mechanistic and kinetic control in the nuclear pore complex.