Membranes with Great Hydrophobicity: A Review on Preparation and Characterization

Membrane distillation for industrial wastewater treatment: Studying the effects of membrane parameters on the wetting performance

Substantial amounts of trace hazardous elements have been detected in industrial wastewater (e.g fluoride > 900 mg/L). Feed water characteristics, operational parameters, and membrane properties are major factors affecting flux and rejection of the MD process. Membrane parameters such as membrane material type and pore size have been investigated. Fluoride ion rejection was selected to setup a methodology to remove trace elements from wastewater by adjusting the membrane parameters in DCMD. Study of the fouling thickness of the MD membrane using pH and feed water composition revealed that a PVDF membrane with a smooth surface holds a thicker fouling layer, which enhances fluoride rejection while reducing the permeate flux. On the other hand, PTFE and PP membranes showed higher mass transfer and higher wetting performance, respectively. Therefore,a PVDF membrane with low organic feed water at higher alkaline pH can be utilized to obtain high-quality permeate, while PTFE can provide the highest flux with acceptable permeate water quality. Therefore, this methodology can be applied toidentify the optimum membrane to fit the required permeate flux, rejection requirements,and operating pH to treat any kind of non-volatileinorganic pollutants from industrial wastewater.

Effects of nanofillers on the characteristics and performance of PEBA-based mixed matrix membranes

Mixed matrix membranes (MMMs) with superior structural and functional properties provide an interesting approach to enhance the separation properties of polymer membranes. As a matter of fact, MMMs combine the advantages of both components; polymeric continuous phase and nanoparticle dispersed phase. Generally, the separation performance of polymeric membranes suffers from an upper-performance limit. Hence, the incorporation of nanoparticles helps to overcome such limitations. Block copolymers such as poly(ether-block-amide) (PEBA) composed of immiscible soft ether segments as well as hard amide segments have been shown as excellent materials for the synthesis of membranes. Consequently, PEBA membranes have been extensively used in scientific research and industrial processes. It is thus aimed to provide an overview of PEBA MMMs. This review is especially devoted to summarizing the effects of nanoparticle loading on PEBA performance and properties such as selectivity, permeability, thermal and mechanical properties, and others. In addition, the preparation techniques of PEBA MMMs and solvent selection are discussed. This article also discusses the many types of nanoparticles incorporated into PEBA membranes. Furthermore, the future direction in PEBA MMMs research for separation processes is briefly predicted.

Superhydrophobic membrane: progress in preparation and its separation properties

Superhydrophobic membrane that is highly resistant to wetting by aqueous solution has gained great attention because of its potential to be applied in many emerging membrane processes such as membrane gas absorption (MGA) and membrane distillation (MD). Numerous approaches have been proposed to obtain membranes with superhydrophobic surface from materials with various degrees of hydrophobicity. This paper then reviews the progress in superhydrophobic membrane preparation and its separation properties. A brief description of superhydrophobicity is firstly presented. Preparation methods of the superhydrophobic membrane are subsequently reviewed, including direct processing method and surface modification of the existing membrane. Finally, the separation properties and challenges of superhydrophobic membranes are discussed. This article could provide an insight for further development of superhydrophobic membrane.

Advances in preparation, modification, and application of polypropylene membrane

Polypropylene (PP) is one of the most used polymers for microporous membrane fabrication due to its good thermal stability, chemical resistance, mechanical strength, and low cost. There have been numerous studies reporting the developments and applications of PP membranes. However, PP membrane with high performance is still a challenge. Thus, this article presents a comprehensive overview of the advances in the preparation, modification and application of PP membrane. The preparation methods of PP membrane are firstly reviewed, followed by the modification approaches of PP membrane. The modifications includes hydrophilic and superhydrophobic modification so that the PP membranes become more suitable to be applied either in aqueous applications or in non-aqueous ones. The fouling resistant of hydrophilized PP membrane and the wetting resistant of superhydrophobized PP membrane are then reviewed. Finally, special attention is given to the various potential applications and industrial outlook of the PP membranes.

Plasma-assisted multi-layered coating towards improved gas permeation properties for organosilica membranes

Plasma treatment enhanced separation performance of multi-layered membranes consisting of a hydrophobic top-layer and hydrophobic intermediate-layer.