Photocatalytic H2 Production Using Semiconductor Nanomaterials via Water Splitting – An Overview

Heterogeneous semiconductor based photocatalytic hydrogen (H2) production by water splitting is one of the widely recognized promising sustainable technologies to deliver clean energy for future energy demands. The present review article mainly focus on the overview of principle of water splitting, different semiconductor nanomaterials used for photocatalytic water splitting in the presence of UV and solar light irradiation, role of sacrificial reagents, simultaneous degradation of pollutants and H2 production reaction, strategy for development of efficient photocatalyst for H2 production. Further the flaws associated with present photocatalytic system like recombination rate of electron–hole pairs, low visible-light response, use of hazardous irradiation sources and surface area of photocatalyst etc. has also been discussed. Recently the use of energy efficient light emitting diodes (LEDs) as an irradiation source for H2 production is highly attracted due to its unique characteristics. Recent literature on LED source based photocatalytic system for H2 production has also been summarized and highlighted. At last, the future prospects and challenges towards the designing of better photocatalytic system for H2 production have also been discussed. From the literature survey, it is concluded that construction of efficient photocatalytic system for simultaneous degradation of pollutants and H2 production under energy efficient irradiation source offer clean and simple system for solving the futuristic environmental concerns and energy crisis.

Light-driven generation of hydrogen: New chromophore dyads for increased activity based on Bodipy dye and Pt(diimine)(dithiolate) complexes

New dyads consisting of a strongly absorbing Bodipy (dipyrromethene-BF2) dye and a platinum diimine dithiolate (PtN2S2) charge transfer (CT) chromophore have been synthesized and studied in the context of the light-driven generation of H2 from aqueous protons. In these dyads, the Bodipy dye is bonded directly to the benzenedithiolate ligand of the PtN2S2 CT chromophore. Each of the new dyads contains either a bipyridine (bpy) or phenanthroline (phen) diimine with an attached functional group that is used for binding directly to TiO2 nanoparticles, allowing rapid electron photoinjection into the semiconductor. The absorption spectra and cyclic voltammograms of the dyads show that the spectroscopic and electrochemical properties of the dyads are the sum of the individual chromophores (Bodipy and the PtN2S2 moieties), indicating little electronic coupling between them. Connection to TiO2 nanoparticles is carried out by sonication leading to in situ attachment to TiO2 without prior hydrolysis of the ester linking groups to acids. For H2 generation studies, the TiO2 particles are platinized (Pt-TiO2) so that the light absorber (the dyad), the electron conduit (TiO2), and the catalyst (attached colloidal Pt) are fully integrated. It is found that upon 530 nm irradiation in a H2O solution (pH 4) with ascorbic acid as an electron donor, the dyad linked to Pt-TiO2 via a phosphonate or carboxylate attachment shows excellent light-driven H2 production with substantial longevity, in which one particular dyad [4(bpyP)] exhibits the highest activity, generating ∼ 40,000 turnover numbers of H2 over 12 d (with respect to dye).

Supramolecular activation of a molecular photocatalyst

The effects of the planar aromatic organic molecules anthracene and pyrene on the catalytic performance of the intramolecular hydrogen evolving photocatalyst [Ru(tbbpy)2(tpphz)PdCl2](PF6)2 functioning as a photocatalytic dyad have been studied. (1)H-NMR studies on [Ru(tbbpy)2(tpphz)PdCl2](PF6)2 and [Ru(tbbpy)2(tpphz)](PF6)2 show a pronounced interaction of pyrene with the ruthenium complexes due to π-π-interactions. The solid state structure of [Ru(tbbpy)2(tpphz)PdCl2]2[Mo8O24] shows a pronounced π-π-stacking of the polyaromatic ligands. In addition, dimerization constants for the complexes and association constants between the complexes and pyrene were determined. Studies on the photocatalytic hydrogen production show a decreased induction phase and increased turn over frequencies during the initial phase of the catalysis in the presence of anthracene and pyrene utilising the catalyst [Ru(tbbpy)2(tpphz)PdCl2](PF6)2 irrespective of the nature of the polycyclic aromatic hydrocarbon.

Enhancing H2 evolution performance of an immobilised cobalt catalyst by rational ligand design

The catalyst [Co^IIIBr((DO)(DOH)(4-BnPO₃H₂)(2-CH₂py)pn)]Br, CoP³ , has been synthesised to improve the stability and activity of cobalt catalysts immobilised on metal oxide surfaces. The CoP³ catalyst contains an equatorial diimine-dioxime ligand, (DOH)₂pn = N²,N²'-propanediyl-bis(2,3-butanedione-2-imine-3-oxime), with a benzylphosphonic acid (4-BnPO₃H₂) group and a methylpyridine (2-CH₂py) ligand covalently linked to the bridgehead of the pseudo-macrocyclic diimine-dioxime ligand. The phosphonic acid functionality provides a robust anchoring group for immobilisation on metal oxides, whereas the pyridine is coordinated to the Co ion to enhance the catalytic activity of the catalyst. Electrochemical investigations in solution confirm that CoP³ shows electrocatalytic activity for the reduction of aqueous protons between pH 3 and 7. The metal oxide anchor provides the catalyst with a high affinity for mesostructured Sn-doped In₂O₃ electrodes (mesoITO; loading of approximately 22 nmol cm^-2) and the electrostability of the attached CoP³ was confirmed by cyclic voltammetry. Finally, immobilisation of the catalyst on ruthenium-dye sensitised TiO₂ nanoparticles in aqueous solutions in the presence of a hole scavenger establishes the activity of the catalyst in this photocatalytic scheme. The advantages of the elaborate catalyst design in CoP³ in terms of stability and catalytic activity are shown by direct comparison with previously reported phosphonated Co catalysts. We therefore demonstrate that rational ligand design is a viable route for improving the performance of immobilised molecular catalysts.

A computational mechanistic investigation of hydrogen production in water using the [RhIII(dmbpy)2Cl2]+/[RuII(bpy)3]2+/ascorbic acid photocatalytic system

The involvement of the Rh^III(H) and Rh^II(H) hydride species in the mechanism of H₂ production could explain the high efficiency of the photocatalytic system.

Synthesis and characterization of a trinuclear iridium(iii) based catalyst for the photocatalytic reduction of CO2

A trimetallic Ir(iii) based photocatalyst for the reduction of CO₂ was developed and investigated, regarding the influence of spatial proximity between the catalyst centers towards the catalytic performance.

Biomimetic Water-Oxidation Catalysts: Manganese Oxides

The catalytic oxidation of water to molecular oxygen is a key process for the production of solar fuels. Inspired by the biological manganese-based active site for this reaction in the enzyme Photosystem II, researchers have made impressive progress in the last decades regarding the development of synthetic manganese catalysts for water oxidation. For this, it has been especially fruitful to explore the many different types of known manganese oxides MnOx. This chapter first offers an overview of the structural, thermodynamic, and mechanistic aspects of water-oxidation catalysis by MnOx. The different test systems used for catalytic studies are then presented together with general reactivity trends. As a result, it has been possible to identify layered, mixed Mn (III/IV)-oxides as an especially promising class of bio-inspired catalysts and an attempt is made to give structure-based reasons for the good performances of these materials. In the outlook, the challenges of catalyst screenings (and hence the identification of a "best MnOx catalyst") are discussed. There is a great variety of reaction conditions which might be relevant for the application of manganese oxide catalysts in technological solar fuel-producing devices, and thus catalyst improvements are currently still addressing a very large parameter space. Nonetheless, detailed knowledge about the biological catalyst and a solid experimental basis concerning the syntheses and water-oxidation reactivities of MnOx materials have been established in the last decade and thus this research field is well positioned to make important contributions to solar fuel research in the future.

Nickel-supported carbon nitride photocatalyst combined with organic dye for visible-light-driven hydrogen evolution from water

The combination of an active Ni site and thiazole orange photosensitizer on g-C₃N₄ enables visible-light-driven H₂ production in aqueous media.

Versatile photocatalytic systems for H2 generation in water based on an efficient DuBois-type nickel catalyst

The generation of renewable H2 through an efficient photochemical route requires photoinduced electron transfer (ET) from a light harvester to an efficient electrocatalyst in water. Here, we report on a molecular H2 evolution catalyst (NiP) with a DuBois-type [Ni(P2(R')N2(R"))2](2+) core (P2(R')N2(R") = bis(1,5-R'-diphospha-3,7-R"-diazacyclooctane), which contains an outer coordination sphere with phosphonic acid groups. The latter functionality allows for good solubility in water and immobilization on metal oxide semiconductors. Electrochemical studies confirm that NiP is a highly active electrocatalyst in aqueous electrolyte solution (overpotential of approximately 200 mV at pH 4.5 with a Faradaic yield of 85 ± 4%). Photocatalytic experiments and investigations on the ET kinetics were carried out in combination with a phosphonated Ru(II) tris(bipyridine) dye (RuP) in homogeneous and heterogeneous environments. Time-resolved luminescence and transient absorption spectroscopy studies confirmed that directed ET from RuP to NiP occurs efficiently in all systems on the nano- to microsecond time scale, through three distinct routes: reductive quenching of RuP in solution or on the surface of ZrO2 ("on particle" system) or oxidative quenching of RuP when the compounds were immobilized on TiO2 ("through particle" system). Our studies show that NiP can be used in a purely aqueous solution and on a semiconductor surface with a high degree of versatility. A high TOF of 460 ± 60 h(-1) with a TON of 723 ± 171 for photocatalytic H2 generation with a molecular Ni catalyst in water and a photon-to-H2 quantum yield of approximately 10% were achieved for the homogeneous system.

A cobalt–NHC complex as an improved catalyst for photochemical hydrogen evolution from water

A macrocyclic N-heterocyclic carbene (NHC)–cobalt complex was found to act as an improved H₂-evolving catalyst in a [Ru(bpy)₃]²⁺-sensitized photosystem using methylviologen as a redox acceptor (MV²⁺ + e⁻ → MV⁺˙, MV²⁺ = N,N′-dimethyl-4,4′-bipyridinium), which provides a driving force of only 150 meV for H₂ evolution at pH 5.0.

The coordination chemistry of organo-hydride donors: new prospects for efficient multi-electron reduction

In biological reduction processes the dihydronicotinamides NAD(P)H often transfer hydride to an unsaturated substrate bound within an enzyme active site. In many cases, metal ions in the active site bind, polarize and thereby activate the substrate to direct attack by hydride from NAD(P)H cofactor. This review looks more widely at the metal coordination chemistry of organic donors of hydride ion--organo-hydrides--such as dihydronicotinamides, other dihydropyridines including Hantzsch's ester and dihydroacridine derivatives, those derived from five-membered heterocycles including the benzimidazolines and benzoxazolines, and all-aliphatic hydride donors such as hexadiene and hexadienyl anion derivatives. The hydride donor properties--hydricities--of organo-hydrides and how these are affected by metal ions are discussed. The coordination chemistry of organo-hydrides is critically surveyed and the use of metal-organo-hydride systems in electrochemically-, photochemically- and chemically-driven reductions of unsaturated organic and inorganic (e.g. carbon dioxide) substrates is highlighted. The sustainable electrocatalytic, photochemical or chemical regeneration of organo-hydrides such as NAD(P)H, including for driving enzyme-catalysed reactions, is summarised and opportunities for development are indicated. Finally, new prospects are identified for metal-organo-hydride systems as catalysts for organic transformations involving 'hydride-borrowing' and for sustainable multi-electron reductions of unsaturated organic and inorganic substrates directly driven by electricity or light or by renewable reductants such as formate/formic acid.

Photogeneration of hydrogen from water using CdSe nanocrystals demonstrating the importance of surface exchange

Unique tripodal S-donor capping agents with an attached carboxylate are found to bind tightly to the surface of CdSe nanocrystals (NCs), making the latter water soluble. Unlike that in similarly solubilized CdSe NCs with one-sulfur or two-sulfur capping agents, dissociation from the NC surface is greatly reduced. The impact of this behavior is seen in the photochemical generation of H2 in which the CdSe NCs function as the light absorber with metal complexes in aqueous solution as the H2-forming catalyst and ascorbic acid as the electron donor source. This precious-metal-free system for H2 generation from water using [Co(bdt)2](-) (bdt, benzene-1,2-dithiolate) as the catalyst exhibits excellent activity with a quantum yield for H2 formation of 24% at 520 nm light and durability with >300,000 turnovers relative to catalyst in 60 h.

Visible-light photoredox catalysis: selective reduction of carbon dioxide to carbon monoxide by a nickel N-heterocyclic carbene-isoquinoline complex

The solar-driven reduction of carbon dioxide to value-added chemical fuels is a longstanding challenge in the fields of catalysis, energy science, and green chemistry. In order to develop effective CO2 fixation, several key considerations must be balanced, including (1) catalyst selectivity for promoting CO2 reduction over competing hydrogen generation from proton reduction, (2) visible-light harvesting that matches the solar spectrum, and (3) the use of cheap and earth-abundant catalytic components. In this report, we present the synthesis and characterization of a new family of earth-abundant nickel complexes supported by N-heterocyclic carbene-amine ligands that exhibit high selectivity and activity for the electrocatalytic and photocatalytic conversion of CO2 to CO. Systematic changes in the carbene and amine donors of the ligand have been surveyed, and [Ni((Pr)bimiq1)](2+) (1c, where (Pr)bimiq1 = bis(3-(imidazolyl)isoquinolinyl)propane) emerges as a catalyst for electrochemical reduction of CO2 with the lowest cathodic onset potential (E(cat) = -1.2 V vs SCE). Using this earth-abundant catalyst with Ir(ppy)3 (where ppy = 2-phenylpyridine) and an electron donor, we have developed a visible-light photoredox system for the catalytic conversion of CO2 to CO that proceeds with high selectivity and activity and achieves turnover numbers and turnover frequencies reaching 98,000 and 3.9 s(-1), respectively. Further studies reveal that the overall efficiency of this solar-to-fuel cycle may be limited by the formation of the active Ni catalyst and/or the chemical reduction of CO2 to CO at the reduced nickel center and provide a starting point for improved photoredox systems for sustainable carbon-neutral energy conversion.

Water reduction systems associated with homoleptic cyclometalated iridium complexes of various 2-phenylpyridines

The photoreduction of water to hydrogen represents a promising method for generating sustainable clean fuel. The molecular processes of this photoreduction require an effective light absorber, such as the ruthenium polybipyridine complex, to collect and convert the solar energy into a usable chemical form. In the search for a highly active and stable photosensitizer (PS), iridium complexes are attractive because of their desirable photophysical characteristics. Herein, a series of homoleptic tris-cyclometalated iridium complexes, based on different 2-phenylpyridine ligands, were utilized as PSs in photocatalytic systems for hydrogen production with [Rh(dtb-bpy)3 ](PF6 )3 (dtb-bpy=4,4'-di-tert-butyl-2,2'-dipyridyl) serving as the water reduction catalyst (WRC) and triethanolamine (TEOA) as the electron donor. The photophysical and electrochemical properties of these complexes were systematically investigated. The excited state of neutral iridium complexes (PS*) could not be quenched by using TEOA as an electron donor, but they could be quenched by using [Rh(dtb-bpy)3 ](PF6 )3 as an electron acceptor, indicating that the PS* quenching pathway in catalytic reactions was most likely an oxidative quenching process. A set of long-lived and highly active systems for hydrogen evolution were obtained in Ir(III) -Rh(III) -TEOA systems. These systems maintained their activity for more than 72 h with visible-light irradiation, and the total turnover number was up to 3040. Comparative studies indicated that the photocatalytic performance of these homoleptic tris-cyclometalated iridium compounds was superior to that of the cationic iridium complex [Ir(ppy)2 (bpy)](PF6 ) (ppy=2-phenylpyridine, bpy=2,2'-dipyridyl) (4), which was used as a reference. The significant increase in the photocatalytic efficiencies was in part attributed to the higher photostability of the neutral Ir(III) complexes. This assumption was supported by their different coordination modes, photophysical, and electrochemical properties.

Toward Highlighting the Ultrafast Electron Transfer Dynamics at the Optically Dark Sites of Photocatalysts

Building a detailed understanding of the structure-function relationship is a crucial step in the optimization of molecular photocatalysts employed in water splitting schemes. The optically dark nature of their active sites usually prevents a complete mapping of the photoinduced dynamics. In this work, transient X-ray absorption spectroscopy highlights the electronic and geometric changes that affect such a center in a bimetallic model complex. Upon selective excitation of the ruthenium chromophore, the cobalt moiety is reduced through intramolecular electron transfer and undergoes a spin flip accompanied by an average bond elongation of 0.20 ± 0.03 Å. The analysis is supported by simulations based on density functional theory structures (B3LYP*/TZVP) and FEFF 9.0 multiple scattering calculations. More generally, these results exemplify the large potential of the technique for tracking elusive intermediates that impart unique functionalities in photochemical devices.

Cobalt complexes as artificial hydrogenases for the reductive side of water splitting

The generation of H2 from protons and electrons by complexes of cobalt has an extensive history. During the past decade, interest in this subject has increased as a result of developments in hydrogen generation that are driven electrochemically or photochemically. This article reviews the subject of hydrogen generation using Co complexes as catalysts and discusses the mechanistic implications of the systems studied for making H2. This article is part of a Special Issue entitled: Metals in Bioenergetics and Biomimetics Systems.

Synthetic applications of photoredox catalysis with visible light

In the past five years, visible-light mediated photoredox catalysis has been emerging as one of the fastest growing fields in organic chemistry because of its low cost, easy availability and environmental benignness. This review intends to summarize recent research progress in novel methodology development and application in organic synthesis, and is organized in terms of key reactive intermediates.