101
|
Miao W, Bard AJ. Electrogenerated chemiluminescence. 72. Determination of immobilized DNA and C-reactive protein on Au(111) electrodes using tris(2,2'-bipyridyl)ruthenium(II) labels. Anal Chem 2004; 75:5825-34. [PMID: 14588023 DOI: 10.1021/ac034596v] [Citation(s) in RCA: 161] [Impact Index Per Article: 8.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Anodic electrogenerated chemiluminescence (ECL) with tri-n-propylamine (TPrA) as a coreactant was used to determine DNA and C-reactive protein (CRP) by immobilizations on Au(111) electrodes using tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)(3)(2+)) labels. A 23-mer synthetic single-stranded (ss) DNA derived from the Bacillus anthracis with an amino-modified group at the 5' end position was covalently attached to the Au(111) substrate precoated with a self-assembled thiol monolayer of 3-mercaptopropanoic acid (3-MPA) in the presence of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDAC) and then hybridized with a target ssDNA tagged with Ru(bpy)(3)(2+) ECL labels. Similarly, biotinylated anti-CRP species were immobilized effectively onto the Au(111) substrate precovered with a layer of avidin linked covalently via the reaction between avidin and a mixed thiol monolayer of 3-MPA and 16-mercaptohexadecanoic acid on Au(111) in the presence of EDAC and N-hydroxysuccinimide. CRP and anti-CRP tagged with Ru(bpy)(3)(2+) labels were then conjugated to the surface layer. ECL responses were generated from the modified electrodes described above by immersing them in a TPrA-containing electrolyte solution. A series of electrode treatments, including blocking free -COOH groups with ethanol amine, pinhole blocking with bovine serum albumin, washing with EDTA/NaCl/Tris buffer, and spraying with inert gases, were used to reduce the nonspecific adsorption of the labeled species. The ECL peak intensity was linearly proportional to the analyte CRP concentration over the range 1-24 microg/mL. CRP concentrations of two unknown human plasma/serum specimens were measured by the standard addition method based on this technique.
Collapse
Affiliation(s)
- Wujian Miao
- Department of Chemistry and Biochemistry, 1 University Station A5300, The University of Texas at Austin, Austin, Texas 78712-0165, USA
| | | |
Collapse
|
102
|
Wolf M, Juncker D, Michel B, Hunziker P, Delamarche E. Simultaneous detection of C-reactive protein and other cardiac markers in human plasma using micromosaic immunoassays and self-regulating microfluidic networks. Biosens Bioelectron 2004; 19:1193-202. [PMID: 15046750 DOI: 10.1016/j.bios.2003.11.003] [Citation(s) in RCA: 154] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/25/2003] [Revised: 10/21/2003] [Accepted: 11/13/2003] [Indexed: 11/19/2022]
Abstract
We show a proof-of-concept in which we combine our previously published concepts of micromosaic immunoassays (microMIAs) with self-regulating microfluidic networks (microFNs) to detect C-reactive protein (CRP) and other cardiac markers such as myoglobin (Mb) and cardiac Troponin I (cTnI). The microFNs are microfabricated in Si, have a well-defined surface chemistry, and are affixed to a bibulous material so as to self-regulate the displacement of an aliquot of liquid through the microFNs using capillary forces. An open section of the channels of the microFNs is covered with a hydrophobic poly(dimethylsiloxane) (PDMS) slab that acts as the substrate for a solid-phase immunoassay. Here, individual assays are conducted using independent channels. These assays are "sequential": series of samples, reagents, and buffers are displaced one after the other over the PDMS surface, and, as these assays are conducted under "microfluidic" conditions, they are fast to perform, very economical in their use of reagents, extremely integrated, and yield high-quality signals. The combinatorial character of microMIAs is exploited to optimize the assay parameters for detecting CRP. In particular, we found it optimal to deposit the capture antibody for CRP on PDMS at a concentration between 20 and 500 microg ml(-1) in PBS in 1 min and to detect captured CRP in 2 min using a detection antibody having a concentration in PBS of 120 microg ml(-1). With this method, CRP is quantitatively detected within 10 min in one microliter of human plasma down to concentrations of 30 ng ml(-1), which suggests the possibility to detect CRP at clinically relevant concentrations for the management of coronary heart disease (CHD) and systemic inflammation.
Collapse
Affiliation(s)
- Marc Wolf
- IBM Research, Zurich Research Laboratory, IBM Research, Saumerstrasse 4/Posfach, CH-8803 Rüschlikon, Switzerland
| | | | | | | | | |
Collapse
|
103
|
Direct immobilization in poly(dimethylsiloxane) for DNA, protein and enzyme fluidic biochips. Anal Chim Acta 2004. [DOI: 10.1016/j.aca.2003.11.015] [Citation(s) in RCA: 32] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
104
|
Shumaker-Parry JS, Zareie MH, Aebersold R, Campbell CT. Microspotting Streptavidin and Double-Stranded DNA Arrays on Gold for High-Throughput Studies of Protein−DNA Interactions by Surface Plasmon Resonance Microscopy. Anal Chem 2004; 76:918-29. [PMID: 14961721 DOI: 10.1021/ac034964v] [Citation(s) in RCA: 107] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
We present two strategies for microspotting 10 x 12 arrays of double-stranded DNAs (dsDNAs) onto a gold-coated glass slide for high-throughput studies of protein-DNA interactions by surface plasmon resonance (SPR) microscopy. Both methods use streptavidin (SA) as a linker layer between a biotin-containing mixed self-assembled monolayer (SAM) and biotinylated dsDNAs to produce arrays with high packing density. The primary mixed SAM is produced from biotin- and oligo(ethylene glycol)-terminated thiols bonded as thiolates onto the gold surface. In the first method, a robotic microspotter is used to deliver nanoliter droplets of dsDNA solution onto a uniform layer of this SA ( approximately 2 x 10(12) SA/cm(2)). SPR microscopy shows a density of (5-6) x 10(11) dsDNA/cm(2) (0.2-0.3 dsDNA/SA) in the array elements. The second method uses instead a microspotted array of this SA linker layer, onto which the microspots of dsDNA are added with spatial registry. SPR microscopy before addition of the dsDNA shows a SA coverage of 2 x 10(12) SA/cm(2) within the spots and a dsDNA density of 8.5 +/- 3.5 x 10(11) dsDNA/cm(2) (0.3-0.7 dsDNA/SA, depending on the length of dsDNA) after dsDNA spotting. We demonstrate the ability to simultaneously monitor protein binding with the SPR microscope in many 200-microm spots with 1-s time resolution and sensitivity to <1 pg of protein.
Collapse
|
105
|
Brevig T, Krühne U, Kahn RA, Ahl T, Beyer M, Pedersen LH. Hydrodynamic guiding for addressing subsets of immobilized cells and molecules in microfluidic systems. BMC Biotechnol 2003; 3:10. [PMID: 12875662 PMCID: PMC183863 DOI: 10.1186/1472-6750-3-10] [Citation(s) in RCA: 16] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/03/2003] [Accepted: 07/23/2003] [Indexed: 11/27/2022] Open
Abstract
BACKGROUND The interest in microfluidics and surface patterning is increasing as the use of these technologies in diverse biomedical applications is substantiated. Controlled molecular and cellular surface patterning is a costly and time-consuming process. Methods for keeping multiple separate experimental conditions on a patterned area are, therefore, needed to amplify the amount of biological information that can be retrieved from a patterned surface area. We describe, in three examples of biomedical applications, how this can be achieved in an open microfluidic system, by hydrodynamically guiding sample fluid over biological molecules and living cells immobilized on a surface. RESULTS A microfluidic format of a standard assay for cell-membrane integrity showed a fast and dose-dependent toxicity of saponin on mammalian cells. A model of the interactions of human mononuclear leukocytes and endothelial cells was established. By contrast to static adhesion assays, cell-cell adhesion in this dynamic model depended on cytokine-mediated activation of both endothelial and blood cells. The microfluidic system allowed the use of unprocessed blood as sample material, and a specific and fast immunoassay for measuring the concentration of C-reactive protein in whole blood was demonstrated. CONCLUSION The use of hydrodynamic guiding made multiple and dynamic experimental conditions on a small surface area possible. The ability to change the direction of flow and produce two-dimensional grids can increase the number of reactions per surface area even further. The described microfluidic system is widely applicable, and can take advantage of surfaces produced by current and future techniques for patterning in the micro- and nanometer scale.
Collapse
Affiliation(s)
- Thomas Brevig
- Department of Molecular Characterization, Biotechnological Institute, Kogle Allé 2, DK-2970 Hørsholm, Denmark
| | - Ulrich Krühne
- CelTor Biosystems, Inc., Windamere Venture Partners, LLC, 12230 El Camino Real, Suite 300, San Diego, CA 92130, USA
| | - Rachel A Kahn
- Department of Molecular Characterization, Biotechnological Institute, Kogle Allé 2, DK-2970 Hørsholm, Denmark
| | - Thomas Ahl
- CelTor Biosystems, Inc., Windamere Venture Partners, LLC, 12230 El Camino Real, Suite 300, San Diego, CA 92130, USA
| | - Michael Beyer
- CelTor Biosystems, Inc., Windamere Venture Partners, LLC, 12230 El Camino Real, Suite 300, San Diego, CA 92130, USA
| | - Lars H Pedersen
- Department of Molecular Characterization, Biotechnological Institute, Kogle Allé 2, DK-2970 Hørsholm, Denmark
| |
Collapse
|
106
|
Geddes CD, Parfenov A, Roll D, Fang J, Lakowicz JR. Electrochemical and Laser Deposition of Silver for Use in Metal-Enhanced Fluorescence. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2003; 19:6236-6241. [PMID: 20725608 PMCID: PMC2923409 DOI: 10.1021/la020930r] [Citation(s) in RCA: 69] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/25/2023]
Abstract
We describe two reagentless methods of silver deposition for metal-enhanced fluorescence. Silver was deposited on glass positioned between two silver electrodes with a constant current in pure water. Illumination of the glass between the electrodes resulted in localized silver deposition. Alternatively, silver was deposited on an Indium Tin Oxide cathode, with a silver electrode as the anode. Both types of deposited silver produced a 5-18-fold increase in the fluorescence intensity of a nearby fluorophore, indocyanine green (ICG). Additionally, the photostability of ICG was dramatically increased by proximity to the deposited silver. These results suggest the use of silver deposited from pure water for surface-enhanced fluorescence, with potential applications in surface assays and lab-on-a-chip-based technologies, which ideally require highly fluorescent photostable systems.
Collapse
Affiliation(s)
- Chris D Geddes
- Institute of Fluorescence and Center for Fluorescence Spectroscopy, Medical Biotechnology Center, University of Maryland Biotechnology Institute, 725 West Lombard Street, Baltimore, Maryland 21201, Department of Biochemistry and Molecular Biology, Center for Fluorescence Spectroscopy, University of Maryland School of Medicine, 725 West Lombard Street, Baltimore, Maryland 21201, Department of Chemistry, Roberts Wesleyan College, 2301 Westside Drive, Rochester, New York 14624, and Center for Biomolecular Science and Engineering (Code 6900), Naval Research Laboratory, Washington, D.C. 20375
| | | | | | | | | |
Collapse
|
107
|
Zhi ZL, Murakami Y, Morita Y, Hasan Q, Tamiya E. Multianalyte immunoassay with self-assembled addressable microparticle array on a chip. Anal Biochem 2003; 318:236-43. [PMID: 12814627 DOI: 10.1016/s0003-2697(03)00117-9] [Citation(s) in RCA: 16] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
This paper describes the random fluidic self-assembly of metallic particles into addressable two-dimensional microarrays and the use of these arrays as a platform for constructing a biochip useful for bioassays. The basic units in the assembly were the microfabricated particles carrying a straightforward visible code and the corresponding array template patterned on a glass substrate. The particles consisted of a hydrophobic and magnetic Ni-polytetrafluoroethylene (PTFE) composite layer on one face, and on the other face a gold layer that was modified for biomolecular attachment. An array template was photoresist-patterned with spatially discrete microwells in which an electrodeposited Ni-PTFE hydrophobic composite layer and a hydrophobic photo-adhesive coating were deposited. The particles, after biomaterial attachment and binding processes in bulk, were self-assembled randomly onto the lubricated bonding sites on the chip substrate, driven by a combination of magnetic, hydrophobic, and capillary interactions. The encoding symbol carried by the particles was used as the signature for the identification of each target/assay attached to the particle surface. We demonstrate here the utility of microfabricated-encoded particle arrays for conducting multianalyte immunoassays in a parallel fashion with the use of imaging detection.
Collapse
Affiliation(s)
- Zheng-liang Zhi
- School of Materials Science, Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Tatsunokuchi, Ishikawa 923-1292, Japan
| | | | | | | | | |
Collapse
|
108
|
Seong GH, Heo J, Crooks RM. Measurement of enzyme kinetics using a continuous-flow microfluidic system. Anal Chem 2003; 75:3161-7. [PMID: 12964765 DOI: 10.1021/ac034155b] [Citation(s) in RCA: 145] [Impact Index Per Article: 6.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
This paper describes a microanalytical method for determining enzyme kinetics using a continuous-flow microfluidic system. The analysis is carried out by immobilizing the enzyme on microbeads, packing the microbeads into a chip-based microreactor (volume approximately 1.0 nL), and flowing the substrate over the packed bed. Data were analyzed using the Lilly-Hornby equation and compared to values obtained from conventional measurements based on the Michaelis-Menten equation. The two different enzyme-catalyzed reactions studied were chosen so that the substrate would be nonfluorescent and the product fluorescent. The first reaction involved the horseradish peroxidase-catalyzed reaction between hydrogen peroxide and N-acetyl-3,7-dihydroxyphenoxazine (amplex red) to yield fluorescent resorufin, and the second the beta-galactosidase-catalyzed reaction of nonfluorescent resorufin-beta-D-galactopyranoside to yield D-galactose and fluorescent resorufin. In both cases, the microfluidics-based method yielded the same result obtained from the standard Michaelis-Menten treatment. The continuous-flow method required approximately 10 microL of substrate solution and 10(9) enzyme molecules. This approach provides a new means for rapid determination of enzyme kinetics in microfluidic systems, which may be useful for clinical diagnostics, and drug discovery and screening.
Collapse
Affiliation(s)
- Gi Hun Seong
- Department of Chemistry, Texas A&M University, P.O. Box 30012, College Station, Texas 77842-3012, USA
| | | | | |
Collapse
|
109
|
Geddes CD, Parfenov A, Roll D, Gryczynski I, Malicka J, Lakowicz JR. Silver Fractal-like Structures for Metal-Enhanced Fluorescence: Enhanced Fluorescence Intensities and Increased Probe Photostabilities. J Fluoresc 2003; 13:267-276. [PMID: 26005313 PMCID: PMC4439014 DOI: 10.1023/a:1025046101335] [Citation(s) in RCA: 70] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
Abstract
Substantial increases in fluorescence emission from fluorophore-protein-coated fractal-like silver structures have been observed. We review two methods for silver fractal structure preparation, which have been employed and studied. The first, a roughened silver electrode, typically yielded a 100-fold increase in fluorophore emission, and the second, silver fractal-like structures grown on glass between two silver electrodes, produced a ≈500-fold increase. In addition, significant increases in probe photostability were observed for probes coated on the silver fractal like structures. These results further serve to compliment our recent work on the effects of nobel metal particles with fluorophores, a relatively new phenomenon in fluorescence we have termed both "metal-enhanced fluorescence" [1] and "radiative decay engineering" [2,3]. These results are explained by the metallic surfaces modifying the radiative decay rate (Γ) of the fluorescent labels. We believe that this new silver-surface preparation, which results in ultrabright and photostable fluorophores, offers a new generic technology platform for increased fluorescence signal levels, with widespread potential applications to the analytical sciences, imaging, and medical diagnostics.
Collapse
Affiliation(s)
- Chris D. Geddes
- Center for Fluorescence Spectroscopy and Institute of Fluorescence, Medical Biotechnology Center, University of Maryland Biotechnology Institute, 725 West Lombard St, Baltimore, Maryland, 21201
| | - Alexandr Parfenov
- University of Maryland School of Medicine, Center for Fluorescence Spectroscopy, Department of Biochemistry and Molecular Biology, 725 West Lombard St, Baltimore, Maryland 21201
| | - David Roll
- Department of Chemistry, Roberts Wesleyan College, 2301 Westside Drive, Rochester, New York
| | - Ignacy Gryczynski
- University of Maryland School of Medicine, Center for Fluorescence Spectroscopy, Department of Biochemistry and Molecular Biology, 725 West Lombard St, Baltimore, Maryland 21201
| | - Joanna Malicka
- University of Maryland School of Medicine, Center for Fluorescence Spectroscopy, Department of Biochemistry and Molecular Biology, 725 West Lombard St, Baltimore, Maryland 21201
| | - Joseph R. Lakowicz
- University of Maryland School of Medicine, Center for Fluorescence Spectroscopy, Department of Biochemistry and Molecular Biology, 725 West Lombard St, Baltimore, Maryland 21201
| |
Collapse
|
110
|
Vykoukal J, Vykoukal DM, Sharma S, Becker FF, Gascoyne PRC. Dielectrically Addressable Microspheres Engineered Using Self-Assembled Monolayers. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2003; 19:2425-2433. [PMID: 20686640 PMCID: PMC2913622 DOI: 10.1021/la0264318] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/25/2023]
Abstract
We have used self-assembled monolayer techniques to produce a new class of microspheres with specifically engineered dielectric properties to enable their dielectrophoretic manipulation and identification in microsystems. Dielectrophoresis is an electrokinetic phenomenon that exploits frequency-dependent polarizability differences between a particle and its suspending medium to drive the movement of the particle toward or away from the high-field regions of an inhomogeneous electric field. While dielectrophoretic methods have been used extensively for cell manipulation, separation, and identification, we wished to extend the applicability of dielectrophoresis to molecular analysis by developing a panel of dielectric microspheres or "handles". Dielectric shell theory was used to model the dielectrophoretic response for a biomimetic particle composed of a thin insulating shell over a conductive interior. We specifically sought to modulate the specific capacitance, and thereby the dielectric properties, of the particle by controlling the thickness of the insulating layer. Such a structure was fabricated by covering a gold-coated polystyrene core particle with self-assembled monolayers of alkanethiol and phospholipid. To test the prediction that the carbon chain length of these layers should dictate the dielectric properties of the particles, we constructed a panel of six microsphere types with shell compositions ranging from a C(9) alkanethiol monolayer to a C(32) hybrid bilayer membrane. These microsphere populations were distinguishable and manipulatable by dielectrophoresis in a characteristic, frequency-dependent manner as predicted by theory. Experimentally derived specific membrane capacitance values were inversely related to the insulating shell thickness and agreed with published capacitance values for planar layers of similar thicknesses. These proof of principle studies are the first to demonstrate that the dielectric properties of particles can be specifically engineered to allow their dielectrophoretic manipulation and are a first step toward the development of bead-based dielectrophoretic microsystems for multiplexed molecular separation and analysis.
Collapse
Affiliation(s)
- Jody Vykoukal
- To whom correspondence should be addressed. E-mail: . Phone: 713-792-7607. Fax: 713-792-5940
| | | | | | | | | |
Collapse
|
111
|
Goodey AP, McDevitt JT. Multishell microspheres with integrated chromatographic and detection layers for use in array sensors. J Am Chem Soc 2003; 125:2870-1. [PMID: 12617642 DOI: 10.1021/ja029696h] [Citation(s) in RCA: 30] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
The development of miniaturized chromatographic systems localized within individual polymer microspheres and their incorporation into a bead-based cross-reactive sensor array platform is reported. The integrated chromatographic and detection concept is based on the creation of distinct functional layers within the microspheres. In this first example of the new methodology, complexing ligands have been selectively immobilized to create "separation" layers harboring an affinity for various metal cations. Additionally, a broadly responsive compleximetric dye is used to yield the "detection" layers that exhibit optical responses in the presence of a wide range of metal cations. Information concerning the identities and concentrations of solution-dissolved metal cations can be drawn from the temporal properties of the beads' optical responses. Varying the nature of the ligand in the separation shell yields a collection of cross-reactive sensing elements well-suited for use in array-based micrototal analysis systems. Accordingly, such beads have been incorporated into the "Electronic Taste Chip" platform and used for discriminating among aqueous metal cation solutions.
Collapse
Affiliation(s)
- Adrian P Goodey
- Department of Chemistry and Biochemistry, The University of Texas at Austin, Austin, Texas 78712, USA
| | | |
Collapse
|
112
|
Parfenov A, Gryczynski I, Malicka J, Geddes CD, Lakowicz JR. Enhanced Fluorescence from Fluorophores on Fractal Silver Surfaces. J Phys Chem B 2003; 107:8829-8833. [PMID: 20686644 PMCID: PMC2913721 DOI: 10.1021/jp022660r] [Citation(s) in RCA: 162] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Recent reports have shown enhanced fluorescence for fluorophores in close proximity to chemically deposited silver islands or colloids. To expand the usefulness of metal-enhanced fluorescence we tested fractal silver structures formed on, or near, silver electrodes by passage of electric currents. The emission intensity of fluorescein-labeled human serum albumin (FITC-HSA) was enhanced over 100-fold when adsorbed to the fractal silver structures as compared to glass. The amplitude-weighted lifetime is dramatically reduced to near 3 ps. Enhanced fluorescence was shown to result in selective observation of FITC-HSA over a fluorophore not attached to the silver surface. And finally, photostability measurements indicate 160-fold more photons are detectable from FITC-HSA on the fractal silver surface. These results suggest the use of in situ generated silver structures for metal-enhanced fluorescence.
Collapse
Affiliation(s)
- Alexandr Parfenov
- Center for Fluorescence Spectroscopy, University of Maryland at Baltimore, Department of Biochemistry and Molecular Biology, 725 West Lombard Street, Baltimore, Maryland 21201
| | - Ignacy Gryczynski
- Center for Fluorescence Spectroscopy, University of Maryland at Baltimore, Department of Biochemistry and Molecular Biology, 725 West Lombard Street, Baltimore, Maryland 21201
| | - Joanna Malicka
- Center for Fluorescence Spectroscopy, University of Maryland at Baltimore, Department of Biochemistry and Molecular Biology, 725 West Lombard Street, Baltimore, Maryland 21201
| | - Chris D. Geddes
- Institute of Fluorescence and Center for Fluorescence Spectroscopy, Medical Biotechnology Center, University of Maryland Biotechnology Institute, 725 West Lombard Street, Baltimore, Maryland 21201
| | - Joseph R. Lakowicz
- Center for Fluorescence Spectroscopy, University of Maryland at Baltimore, Department of Biochemistry and Molecular Biology, 725 West Lombard Street, Baltimore, Maryland 21201
| |
Collapse
|
113
|
Cho EJ, Tao Z, Tehan EC, Bright FV. Multianalyte pin-printed biosensor arrays based on protein-doped xerogels. Anal Chem 2002; 74:6177-84. [PMID: 12510736 DOI: 10.1021/ac020454+] [Citation(s) in RCA: 58] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
We report the first biosensor arrays based on pin printing protein-doped xerogels. The individual biosensor elements are on the order of 100 microm in diameter. Arrays are formed (1) onto a planar substrate that is excited by an external source (laser) or (2) directly on the face of a light-emitting diode. We illustrate the potential of our approach by fabricating, testing, and characterizing four types of pin-printed biosensor arrays (PPBSA) for the simultaneous detection of glucose and O2. The analytically reliable operating ranges for the PPBSAs are 0.1-10 mM for glucose and 0.1-100% for O2. The PPBSAs exhibit short- and long-term reproducibilities of no worse than 4 and 8%, respectively. The overall array-to-array response reproducibilities are < or = 12%. These results demonstrate for the first time the combination sol-gel processing and pin printing methods as a way to rapidly form ensembles of integrated, reusable, and stable biosensor arrays for simultaneous multianalyte detection.
Collapse
Affiliation(s)
- Eun Jeong Cho
- Department of Chemistry, Natural Sciences Complex, University at Buffalo, The State University of New York, Buffalo, New York 14260-3000, USA
| | | | | | | |
Collapse
|