Reactivity triggered by an organic microcrystal interface: a case study involving an environmentally benign, aromatic boric acid reaction

At a self-assembled {002} crystal-solution interface, inactive 9-anthracene boric acid was transformed into a highly active state, for catalyst-free aromatic substitution and oxidation.

Making natural products from renewable feedstocks: back to the roots?

This review highlights the utilization of biomass-derived building blocks in the total synthesis of natural products.

Boron-doped carbon nanodots dispersed on graphitic carbon as high-performance catalysts for acetylene hydrochlorination

Boron-doped carbon nanodot materials, comprising evenly distributed BC₃-nanodots in a layered carbon matrix, are prepared through a pre-assembly assisted carbonization synthetic strategy.

Linear β-amino alcohol catalyst anchored on functionalized magnetite nanoparticles for enantioselective addition of dialkylzinc to aromatic aldehydes

A linear β-amino alcohol ligand, previously found to be a very efficient catalyst for enantioselective addition of dialkylzinc to aromatic aldehydes, has been anchored on differently functionalized superparamagnetic core–shell magnetite–silica nanoparticles (1a and 1b). Its catalytic activity in the addition of dialkylzinc to aldehydes has been evaluated, leading to promising results, especially in the case of 1b for which the recovery by simple magnetic decantation and reuse was successfully verified.

The catalytic activity of a linear β-amino alcohol ligand anchored on functionalized magnetite/silica core–shell nanoparticles has been evaluated in the addition of dialkylzinc to aldehydes leading to promising results.

Biotransformation of cladribine using a stabilized biocatalyst in calcium alginate beads

Cladribine is a nucleoside analogue widely used in the pharmaceutical industry for the treatment of several neoplasms, including hairy-cell leukemia among others. This compound has also shown efficacy in the treatment of autoimmune diseases such as rheumatoid arthritis and multiple sclerosis. In this work, a green bioprocess for cladribine biosynthesis using immobilized Arthrobacter oxydans was developed. The microorganism was stabilized by entrapment immobilization in the natural matrix alginate. Different reaction parameters were optimized obtaining a biocatalyst able to achieve cladribine bioconversion values close to 85% after 1 hr, the shortest reaction times reported so far. The developed bioprocess was successfully scaled-up reaching a productivity of 138 mg L^-1 hr^-1 . Also, the biocatalyst was stable for 5 months in storage and in 96 hr at operational conditions.

New Perspectives for Fisetin

Fisetin is a flavonol that shares distinct antioxidant properties with a plethora of other plant polyphenols. Additionally, it exhibits a specific biological activity of considerable interest as regards the protection of functional macromolecules against stress which results in the sustenance of normal cells cytoprotection. Moreover, it shows potential as an anti-inflammatory, chemopreventive, chemotherapeutic and recently also senotherapeutic agent. In view of its prospective applications in healthcare and likely demand for fisetin, methods for its preparation and their suitability for pharmaceutical use are discussed herein.

Functionalized Silicas for Metal-Free and Metal-Based Catalytic Applications: A Review in Perspective of Green Chemistry

Heterogeneous catalysis plays a key role in promoting green chemistry through many routes. The functionalizable reactive silanols highlight silica as a beguiling support for the preparation of heterogeneous catalysts. Metal active sites anchored on functionalized silica (FS) usually demonstrate the better dispersion and stability due to their firm chemical interaction with FSs. Having certain functional groups in structure, FSs can act as the useful catalysts for few organic reactions even without the need of metal active sites which are termed as the covetous reusable organocatalysts. Magnetic FSs have laid the platform where the effortless recovery of catalysts is realized just using an external magnet, resulting in the simplified reaction procedure. Using FSs of multiple functional groups, we can envisage the shortened reaction pathway and, reduced chemical uses and chemical wastes. Unstable bio-molecules like enzymes have been stabilized when they get chemically anchored on FSs. The resultant solid bio-catalysts exhibited very good reusability in many catalytic reactions. Getting provoked from the green chemistry aspects and benefits of FS-based catalysts, we confer the recent literature and progress focusing on the significance of FSs in heterogeneous catalysis. This review covers the preparative methods, types and catalytic applications of FSs. A special emphasis is given to the metal-free FS catalysts, multiple FS-based catalysts and magnetic FSs. Through this review, we presume that the contribution of FSs to green chemistry can be well understood. The future perspective of FSs and the improvements still required for implementing FS-based catalysts in practical applications have been narrated at the end of this review.

Green synthesis and characterization of novel 1,2,4,5-tetrasubstituted imidazole derivatives with eco-friendly red brick clay as efficacious catalyst

Use of cheaper and recyclable materials contributes positively to economic growth with environmental sustainability. We report the prospect of utilizing red brick clay as catalyst, which exhibited excellent activity in rapid one-pot four-component condensation of 1,2,4,5-tetrasubstituted imidazoles with high conversion and yields (91-96%) in aqueous medium at 60 °C in short reaction times (25-40 min). The red brick clay material was fully characterized by XRD, FT-IR, SEM, TEM, EDX and BET analyses. Red brick clay consisted of oxides of Si (20.38%), Fe (19.55%), Al (14.30%) and minor amounts of Ca (3.60%) and Mg (1.68%). The slate-like-shaped structure morphology and flaky appearance of inexpensive solid clay material proved competent material for the synthesis of 15 novel 1,2,4,5-tetrasubstituted imidazole derivatives. In addition, the advantages of the eco-friendly method are non-toxicity and re-usability of the catalyst. Reaction offers 78% atom economy and 84% carbon capture.

Robust synthesis of sugar-coumarin based fluorescent 1,4-disubstituted-1,2,3-triazoles using highly efficient recyclable citrate grafted β-cyclodextrin@magnetite nano phase transfer catalyst in aqueous media

Green synthesis of 1,4-disubstituted-1,2,3-triazoles via click reaction using nano magnetic Fe₃O₄ core decorated with cyclodextrin-citric acid (Fe₃O₄@CD-CIT) acting as a phase transfer nanoreactor with low copper loading under ultrasonication at 40 °C, in aqueous media is described. Anchoring the surface of magnetite with cyclodextrin (CD) prevents its agglomeration and at the same time, CD provides a hydrophobic niche for lipophilic reactants while its outer hydrophilic core makes the reaction feasible in water yielding almost quantitative yield of desired products. Magnetic separation using an external magnet, recyclability and reuse (7 times), without appreciably affecting the %yield of the products are its other attractive attributes. Gram scale synthesis was also achieved with 93% yield.

Sustainable synthesis of uridine-5'-monophosphate analogues by immobilized uracil phosphoribosyltransferase from Thermus thermophilus

Nowadays enzymatic synthesis of nucleic acid derivatives is gaining momentum over traditional chemical synthetic processes. Biotransformations catalyzed by whole cells or enzymes offer an ecofriendly and efficient alternative to the traditional multistep chemical methods, avoiding the use of chemical reagents and organic solvents that are expensive and environmentally harmful. Herein we report for the first time the covalent immobilization a uracil phosphoribosyltransferase (UPRT). In this sense, UPRT from Thermus thermophilus HB8 was immobilized onto glutaraldehyde-activated MagReSyn®Amine magnetic iron oxide porous microparticles (MTtUPRT). According to the catalyst load experiments, MTtUPRT3 was selected as optimal biocatalyst for further studies. MTtUPRT3 was active and stable in a broad range of temperature (70-100 °C) and in the pH interval 6-8, displaying maximum activity at 100 °C and pH 7 (activity 968 IU/g_support, retained activity 100%). In addition, MTtUPRT3 could be reused up to 8 times in the synthesis of uridine-5'-monophosphate (UMP). Finally, MTtUPRT3 was successfully applied in the sustainable synthesis of different 5-modified uridine-5'-monophosphates at short times. Taking into account these results, MTtUPRT3 would emerge as a valuable biocatalyst for the synthesis of nucleoside monophosphates through an efficient and environmentally friendly methodology.

Broadening the Scope of Biocatalysis in Sustainable Organic Synthesis

This Review is aimed at synthetic organic chemists who may be familiar with organometallic catalysis but have no experience with biocatalysis, and seeks to provide an answer to the perennial question: if it is so attractive, why wasn't it extensively used in the past? The development of biocatalysis in industrial organic synthesis is traced from the middle of the last century. Advances in molecular biology in the last two decades, in particular genome sequencing, gene synthesis and directed evolution of proteins, have enabled remarkable improvements in scope and substantially reduced biocatalyst development times and cost contributions. Additionally, improvements in biocatalyst recovery and reuse have been facilitated by developments in enzyme immobilization technologies. Biocatalysis has become eminently competitive with chemocatalysis and the biocatalytic production of important pharmaceutical intermediates, such as enantiopure alcohols and amines, has become mainstream organic synthesis. The synthetic space of biocatalysis has significantly expanded and is currently being extended even further to include new-to-nature biocatalytic reactions.

Zn-Catalyzed Multicomponent KA2 Coupling: One-Pot Assembly of Propargylamines Bearing Tetrasubstituted Carbon Centers

Tetrasubstituted propargylamines comprise a unique class of highly useful compounds, which can be accessed through the multicomponent coupling between ketones, amines, and alkynes (KA² coupling), an underexplored transformation. Herein, the development of a novel, highly efficient, and user-friendly catalytic system for the KA² coupling, based on the environmentally benign, inexpensive, and readily available zinc acetate, is described. This system is employed in the multicomponent assembly of unprecedented, tetrasubstituted propargylamines derived from structurally diverse, challenging, and even biorelevant substrates. Notable features of this protocol include the demonstration of the enhancing effect that neat conditions can have on catalytic activity, as well as the expedient functionalization of hindered, prochiral cyclohexanones, linear ketones, and interesting molecular scaffolds such as norcamphor and nornicotine.

Stimulus-Responsive Regulation of Enzyme Activity for One-Step and Multi-Step Syntheses

Multi-step biocatalytic reactions have gained increasing importance in recent years because the combination of different enzymes enables the synthesis of a broad variety of industrially relevant products. However, the more enzymes combined, the more crucial it is to avoid cross-reactivity in these cascade reactions and thus achieve high product yields and high purities. The selective control of enzyme activity, i.e., remote on-/off-switching of enzymes, might be a suitable tool to avoid the formation of unwanted by-products in multi-enzyme reactions. This review compiles a range of methods that are known to modulate enzyme activity in a stimulus-responsive manner. It focuses predominantly on in vitro systems and is subdivided into reversible and irreversible enzyme activity control. Furthermore, a discussion section provides indications as to which factors should be considered when designing and choosing activity control systems for biocatalysis. Finally, an outlook is given regarding the future prospects of the field.

Synthesis and Structure of Copper Complexes of a N6O4 Macrocyclic Ligand and Catalytic Application in Alcohol Oxidation

Reactions between N6O4 macrocyclic 1,4,19,22,25,40-hexaaza-10,13,31,34-tetraoxa-6,14,27,35(1,4)-tetrabenzenacyclopentacontane (L) and several copper salts (viz. trifuoromethane and toluene sulfonates, nitrate, perchlorate, benzoate, and acetate) led to the formation of dinuclear compounds [Cu2(OSO2CF3)2(DMF)2L](SO3CF3)2 (1), [Cu2(p-OSO2C6H4Me)2L(DMF)2](SO3C6H4Me)2 (2), [Cu2(ONO2)2L(DMF)2](NO3)2 (3), [Cu2(OClO3)2(DMF)2L](ClO4)2 (4), [Cu2(OOCPh)2L(H2O)2](O2CPh)2 (5), and [Cu2(OOCMe)4L] (6), which were characterized by IR, elemental analysis and TG-DTA (thermogravimetric-differential thermal analysis), as well as by single-crystal X-ray diffraction, EPR (electron paramagnetic resonance) spectroscopy, and electrochemical techniques (cyclic voltammetry and controlled potential electrolysis). The molecular structures of compounds 1–6 reveal a considerable conformational flexibility of the ligand L, which allowed its readjustment for the formation of the metal compounds and confirmed the presence of dinuclear endo macrocyclic species. In every case, the L ligand coordinates to each copper cation via three nitrogen atoms, with the remaining coordination positions of the metal square pyramid environment being accomplished by neutral or anionic ligands. The macrocyclic cavities appear to be adequate for the enclosure of a neutral species as proved by compound 6 with 1,4-dioxane. The compounds, in combination with the TEMPO (2,2,6,6-tetramethyl-piperidinyloxyl) radical and in alkaline aqueous solution, act as efficient catalysts in the aerobic oxidation of different alcohols to the corresponding aldehydes (yields up to 99% and TON up 232) after 20 h at 70 °C. In addition, the microwave-assisted solvent-free peroxidative oxidation (by tert-butylhydroperoxide, TBHP) of 1-phenylethanol led to acetophenone yields up to 99% and TOF of 1.1 × 103 after 0.5 h, without any additive.

An atom efficient synthesis of tamoxifen

The direct carbolithiation of diphenylacetylenes and their cross-coupling procedure taking advantage of the intermediate alkenyllithium reagents are presented. By employing our recently discovered highly active palladium nanoparticle based catalyst, we were able to couple an alkenyllithium reagent with a high (Z/E) selectivity (10 : 1) and good yield to give the breast cancer drug tamoxifen in just 2 steps from commercially available starting materials and with excellent atom economy and reaction mass efficiency.

Catalytic Generation and Chemoselective Transfer of Nucleophilic Hydrides from Dihydrogen

Copper(I)-N-heterocyclic-carbene (NHC) complexes enabled the catalytic generation of nucleophilic hydrides from dihydrogen (H₂ ) and their subsequent transfer to allylic chlorides. The highly chemoselective catalyst displayed no concomitant hydrogenation reactivity; in fact, the terminal double bond formed in the hydride transfer remained intact. Switching to deuterium gas (D₂ ) allowed for regioselective monodeuteration with excellent isotope incorporation.

Characterization and application of chemical-resistant polyurethane-based enzyme and whole cell compartments

This study presents the preparation and physical-chemical characterization of chemical resistant polyurethane-based compartments for biocatalytic application. The artificial compartments were prepared from an emulsion of polymer precursor and an aqueous phase that includes a biocatalytic reaction system. After curing, highly dispersed aqueous domains were obtained, which still contain the entire biocatalytic reaction system and remain fixed in the solid polymer preparation. The tensile and compression behavior of the prepared polymeric material is not significantly affected by the incorporation and facilitates excellent stability against various organic solvents and acid solutions. Thereby, the compartments can be used not only for enantioselective alcohol-dehydrogenase catalyzed reduction but also for a whole cell catalyzed hydrolysis of esters. Moreover, the compartmented whole-cell system was considerably stable to allow multiple reuses without a noticeable loss of catalytic activity of the incorporated whole cell catalytic reaction system.

Bromination of tetrapyrrolic scaffolds: a sustainable approach

A sustainable procedure developed for the bromination of organic substrates, such as olefins and small aromatic rings, has been applied to porphyrin derivatives.

Synthesis, characterization and catalytic epoxidation properties of a new tellurotungstate(iv)-supported rhenium carbonyl derivative

We synthesized a new tellurotungstate(iv)-supported rhenium carbonyl derivative, Na₂H₂[(CH₃)₄N]₆[Te₂W₂₀O₇₀{Re(CO)₃}₂]·20H₂O (1). Additionally, compound 1 showed excellent catalytic activity in the selective epoxidation of alkenes under comparatively mild reaction conditions.

Recent trends in the development of sustainable catalytic systems for the oxidative cleavage of cycloalkenes by hydrogen peroxide

This review proposes a comprehensive, critical, and accessible assessment of reaction conditions for cycloolefin oxidative cleavage regarding green chemistry criteria.

Multicomponent Reactions Accelerated by Aqueous Micelles

Multicomponent reactions are powerful synthetic tools for the efficient creation of complex organic molecules in an one-pot one-step fashion. Moreover, the amount of solvents and energy needed for separation and purification of intermediates is significantly reduced what is beneficial from the green chemistry issues point of view. This review highlights the development of multicomponent reactions conducted using aqueous micelles systems during the last two decades.

Peroxidative Oxidation of Alkanes and Alcohols under Mild Conditions by Di- and Tetranuclear Copper (II) Complexes of Bis (2-Hydroxybenzylidene) Isophthalohydrazide

Bis(2-hydroxybenzylidene)isophthalohydrazide (H₄L) has been used to synthesize the dinuclear [Cu₂(1κNO²:2κN′O′²-H₂L)(NO₃)₂(H₂O)₂] (1) and the tetranuclear [Cu₄(μ-1κNO²:2κN′O²-H₂L)₂(μ-NO₃)₂(H₂O)₄]·2C₂H₅OH (2) complexes. The solvent plays an important role in determining the ligand behaviour in the syntheses of the complexes. An ethanol-acetonitrile mixture of solvents favours partials enolization in the case of 2. Both complexes have been characterized by elemental analysis, infrared radiation (IR), single crystal X-ray crystallography and electrochemical methods. The variable temperature magnetic susceptibility measurements of 2 show strong antiferromagnetic coupling between the central nitrato-bridged Cu (II) ions. The catalytic activity of both 1 and 2 has been screened toward the solvent-free microwave-assisted oxidation of alcohols and the peroxidative oxidation of alkanes under mild conditions. Complex 1 exhibits the highest activity for both oxidation reactions, leading selectively to a maximum product yield of 99% (for the 1-phenylethanol oxidation after 1 h without any additive) and 13% (for the cyclohexane oxidation to cyclohexyl hydroperoxide, cyclohexanol and cyclohexanone after 3 h).

Combined Cross-Linked Enzyme Aggregates as Biocatalysts

Enzymes are efficient biocatalysts providing an important tool in many industrial biocatalytic processes. Currently, the immobilized enzymes prepared by the cross-linked enzyme aggregates (CLEAs) have drawn much attention due to their simple preparation and high catalytic efficiency. Combined cross-linked enzyme aggregates (combi-CLEAs) including multiple enzymes have significant advantages for practical applications. In this review, the conditions or factors for the preparation of combi-CLEAs such as the proportion of enzymes, the type of cross-linker, and coupling temperature were discussed based on the reaction mechanism. The recent applications of combi-CLEAs were also reviewed.

Electrification of Biotechnology: Quo Vadis?

Electrobiotechnology has come a long way and has gained much interest among researchers all over the world. In the previous chapters of this book, an abundance of successful developments of lab-scale electrobiosynthesis and their underlying fundamentals are described. Thereby the individual needs and lines of research are highlighted. In this final chapter we will try to shed light on the overall performance of electrobiosynthetic processes with regard to their technological maturity, as well as the potential ecological and economic incentives for their industrial implementation.The evaluation of technical maturity, in particular, clearly demonstrates that electrobiosynthesis is still in its infancy. Bridging the "valley of death" between promising lab-scale results and first industrial applications as a market opener can only be achieved by the joint efforts of researchers from different disciplines in academia and industry, as well as by public funding and venture capital.Unfortunately, among other factors, the low degree of technical maturity hampers ecological evaluation, which so far has been limited to a small number of complete life cycle assessments. Therefore, we suggest using simplified evaluation tools (e.g., the environmental E-factor) to at least acquire clues about different parameters that influence the ecological impact. Ultimately, money makes the world go round and, hence, economic aspects will determine whether or not electrobiotechnological processes are implemented in industry. The existing examples show that different production routes based on electrobiosynthesis can become economically feasible.

The limits to biocatalysis: pushing the envelope

In the period 1985 to 1995 applications of biocatalysis, driven by the need for more sustainable manufacture of chemicals and catalytic, (enantio)selective methods for the synthesis of pharmaceutical intermediates, largely involved the available hydrolases. This was followed, in the next two decades, by revolutionary developments in protein engineering and directed evolution for the optimisation of enzyme function and performance that totally changed the biocatalysis landscape. In the same period, metabolic engineering and synthetic biology revolutionised the use of whole cell biocatalysis in the synthesis of commodity chemicals by fermentation. In particular, developments in the enzymatic enantioselective synthesis of chiral alcohols and amines are highlighted. Progress in enzyme immobilisation facilitated applications under harsh industrial conditions, such as in organic solvents. The emergence of biocatalytic or chemoenzymatic cascade processes, often with co-immobilised enzymes, has enabled telescoping of multi-step processes. Discovering and inventing new biocatalytic processes, based on (meta)genomic sequencing, evolving enzyme promiscuity, chemomimetic biocatalysis, artificial metalloenzymes, and the introduction of non-canonical amino acids into proteins, are pushing back the limits of biocatalysis function. Finally, the integral role of biocatalysis in developing a biobased carbon-neutral economy is discussed.

A Two-Step Process for the Synthesis of Hydroxytyrosol

A new process for the synthesis of hydroxytyrosol (3,4-dihydroxyphenylethanol), the most powerful natural antioxidant currently known, by means of a two-step approach is reported. Catechol is first reacted with 2,2-dimethoxyacetaldehyde in basic aqueous medium to produce the corresponding mandelic derivative with >90 % conversion of the limiting reactant and about 70 % selectivity to the desired para-hydroxyalkylated compound. Thereafter, the intermediate is hydrogenated to hydroxytyrosol by using a Pd/C catalyst, with total conversion of the mandelic derivative and 68 % selectivity. This two-step process is the first example of a synthetic pathway for hydroxytyrosol that does not involve the use of halogenated components or reduction methodologies that produce stoichiometric waste. It also avoids the complex procedure currently used for hydroxytyrosol purification when it is extracted from wastewater of olive oil production.

Investigating the Mechanism of Horseradish Peroxidase as a RAFT-Initiase

A detailed mechanistic and kinetic study of enzymatically initiated RAFT polymerization is performed by combining enzymatic assays and polymerization kinetics analysis. Horseradish peroxidase (HRP) initiated RAFT polymerization of dimethylacrylamide (DMAm) was studied. This polymerization was controlled by 2-(propionic acid)ylethyl trithiocarbonate (PAETC) in the presence of H₂O₂ as a substrate and acetylacetone (ACAC) as a mediator. In general, well controlled polymers with narrow molecular weight distributions and good agreement between theoretical and measured molecular weights are consistently obtained by this method. Kinetic and enzymatic assay analyses show that HRP loading accelerates the reaction, with a critical concentration of ACAC needed to effectively generate polymerization initiating radicals. The PAETC RAFT agent is required to control the reaction, although the RAFT agent also has an inhibitory effect on enzymatic performance and polymerization. Interestingly, although H₂O₂ is the substrate for HRP there is an optimal concentration near 1 mM, under the conditions studies, with higher or lower concentrations leading to lower polymerization rates and poorer enzymatic activity. This is explained through a competition between the H₂O₂ acting as a substrate, but also an inhibitor of HRP at high concentrations.