Palladium-catalysed cross-coupling of organosilicon reagents

Near-IR oxime-based solvatochromic perylene diimide probe as a chemosensor for Pd species and Cu2+ ions in water and live cells

A near-IR perylene diimide probe (OPR-PDI) containing an oxime-propargyl hybrid moiety at the bay position, was designed and synthesized for detection of Pd species and Cu²⁺ ions in 90% water, the solid state and MG-63 live cells. The aggregation tendency of OPR-PDI in different polarity solvents transmits solvatochromic and fluorochromic properties to differentiate certain organic solvents. Supramolecular aggregates of OPR-PDI in 90% water act as a dual chemosensor for palladium (Pd) species via de-propargylation or hydrolysis of the Schiff-base and Cu²⁺ ions via complexation with the O/N binding site with a low limit of detection (LOD) of the order of 7.9 × 10^-8 M and 3.4 × 10^-7 M respectively. TLC strips coated with OPR-PDI can be applied for sensing of Pd⁰ and Cu²⁺ ions in the solid state at levels as low as 34.6 ng cm^-2 and 10.5 ng cm^-2. OPR-PDI imprinted TLC strips could be used as paper sheets for writing coloured alphabets using Pd⁰ and Cu²⁺ ions as ink. Moreover, MTT assay showed that OPR-PDI has very low cytotoxicity (IC₅₀ = 230 μM), good permeability, biocompatibility and can be applied for bio-imaging of Pd species and Cu²⁺ ions in MG-63 cells. DFT calculations, and cyclic voltammetric (CV) and NMR titration studies have also been discussed.

Direct Hiyama Cross-Coupling of (Hetero)arylsilanes with C(sp2)-H Bonds Enabled by Cobalt Catalysis

We report a chelation-assisted C-H arylation of various indoles with sterically and electronically diverse (hetero)arylsilanes enabled by cost-effective Cp*-free cobalt catalysis. Key to the success of this strategy is the judicious choice of copper(II) fluoride as a bifunctional sliane activator and catalyst reoxidant. This methodology features a broad substrate scope and good functional group compatibility. The synthetic versatility of this protocol has been highlighted by the gram-scale synthesis and late-stage diversification of biologically active molecules.

Divergent Synthesis of Vinyl-, Benzyl-, and Borylsilanes: Aryl to Alkyl 1,5-Palladium Migration/Coupling Sequences

Organosilicon compounds have been extensively utilized both in industry and academia. Studies on the syntheses of diverse organosilanes is highly appealing. Through-space metal/hydrogen shifts allow functionalization of C-H bonds at a remote site, which are otherwise difficult to achieve. However, until now, an aryl to alkyl 1,5-palladium migration process seems to have not been presented. Reported herein is the remote olefination, arylation, and borylation of a methyl group on silicon to access diverse vinyl-, benzyl-, and borylsilanes, constituting a unique C(sp³ )-H transformation based on a 1,5-palladium migration process.

A Modular, Enantioselective Synthesis of Resolvins D3, E1, and Hybrids

Resolvins D3 and E1 are important signaling molecules in the resolution of inflammation. Here, we report a convergent and flexible strategy to prepare these natural products using Hiyama-Denmark coupling of five- and six-membered cyclic alkenylsiloxanes to connect three resolvin fragments, and control the stereochemistry of the natural product (Z)-alkenes. The modular nature of this approach enables the synthesis of novel resolvin hybrids, opening up opportunities for more-extensive investigations of resolvin biology.

Dicarbonylative benzannulation of 3-acetoxy-1,4-enynes with CO and silylboranes by Pd and Cu cooperative catalysis: one-step access to 3-hydroxyarylacylsilanes

A new, general Pd/Cu-cocatalysed dicarbonylative benzannulation of 3-acetoxy-1,4-enynes with CO and silylboranes is described. The method utilizes CO as both a one-carbon (C1) unit and an external addition functional reagent to achieve an unprecedented dicarbonylative benzannulation process, and represents a facile, efficient route to 3-hydroxyarylacylsilanes. Mechanistically, the silyl-Cu intermediate formed from CuF2 and silylboranes, and silyl-Pd intermediate generated by transmetallation are two key factors for successfully targeting the reaction and selectivity.

A conjugated microporous polymer as a recyclable heterogeneous ligand for highly efficient regioselective hydrosilylation of allenes

Pyridines containing adjacent C[triple bond, length as m-dash]C bonds were utilized as ligand units and integrated into the skeleton of conjugated microporous polymers. The resultant Pd-CMP-1 was first applied as a highly efficient heterogeneous catalytic system for Pd-catalyzed allene hydrosilylation towards a wide range of allenes to produce branched allylsilanes with high regioselectivity. The ligand units of the polymer, along with the confinement effect of the porous structure, jointly regulated the regioselectivity. The parts-per-million (ppm) levels of Pd, coordinated with the recyclable heterogeneous ligand, show promise for industrial applications. This work opens a new front of using CMP as an intriguing platform for developing highly efficient catalysts to control the regioselectivities in allene hydrosilylation.

Silylation of Pyridine, Picolines, and Quinoline with a Zinc Catalyst

Zn(OTf)2 (OTf- = trifluoromethanesulfonate) catalyzes the silylation of pyridine, 3-picoline, and quinoline to afford the silylated products, where the silyl groups are meta to the nitrogen. The isolated yields of the products range from 41 to 26%. The 2- and 4-picolines yielded the silylmethylpyridines, where the CH3 groups were silylated instead of the ring. The pyridine silylation can occur via two separate pathways, involving either a 1,4- or a 1,2-hydrosilylation of pyridine as the first step. A byproduct of the pyridine silylation is a head-to-tail dimerization of N-silyl-1,4-dihydropyridine to form a diazaditwistane molecule.

Transition metal-free electrocatalytic halodeborylation of arylboronic acids with metal halides MX (X = I, Br) to synthesize aryl halides

An efficient and regioselective ipso-halogenation of diverse arylboronic acids with metal halide salts MX (X = I, Br) has been well established under electrochemical conditions.

The direct trifluoromethylsilylation and cyanosilylation of aldehydes via an electrochemically induced intramolecular pathway

The trifluoromethylsilylation and cyanosilylation of aldehydes via the intramolecular cleavage of Si–CN and Si–CF₃ bonds are developed based on electrochemically induced Si–O affinity.

Access to branched allylsilanes by nickel-catalyzed regioselective hydrosilylation of allenes

A Ni(acac)₂/Xantphos-catalyzed hydrosilylation of allenes has been developed.

B(C6F5)3-Catalyzed C-C Coupling of 1,4-Naphthoquinones with the C-3 Position of Indole Derivatives in Water

An atom-economical and environmentally benign approach for the synthesis of indole-substituted 1,4-naphthoquinones from indoles and 1,4-naphthoquinones using readily available Lewis acidic B(C₆F₅)₃ in water and with the recycling of water and part of the catalyst is reported. The reaction proceeded through the B(C₆F₅)₃-catalyzed C(sp²)-H and C(sp²)-H bond coupling of 1,4-naphthoquinones with the C-3 position of indole derivatives in water. This methodology provides a facile protocol for the synthesis of some new indole-substituted 1,4-naphthoquinones in satisfactory yields and with a broad substrate scope. When compared to known methods for the synthesis of indole-substituted 1,4-naphthoquinones, this protocol is practical and efficient and does not require a transition-metal catalyst or toxic organic solvents. In addition, we utilized a simple filtration process for complete recycling of the solvent and the part of the catalyst in each reaction cycle.

Synthesis of Cyclic Alkenyl Dimethylsiloxanes from Alkynyl Benzyldimethylsilanes and Application in Polyene Synthesis

Cyclic dimethylalkenylsiloxanes, useful motifs for (Z)-selective Hiyama cross-coupling, are accessed from alkynyl benzyldimethylsilanes featuring adjacent allylic or homoallylic oxygen substituents by semihydrogenation/debenzylation/cyclization. While formation of 5- and 6-membered rings can be achieved from the free alcohols using fluoride or silanolate, allylic acetate precursors to 5-membered rings display distinct modes of activation. The utility of these compounds is demonstrated through the preparation of a variety of (Z)-alkene-containing polyenes and application to a concise total synthesis of leukotriene B₃.

Bidirectional Hiyama-Denmark Cross-Coupling Reactions of Bissilyldeca-1,3,5,7,9-pentaenes for the Synthesis of Symmetrical and Non-Symmetrical Carotenoids

The construction of the carotenoid skeleton by Pd-catalyzed Csp² -Csp² cross-coupling reactions of symmetrical and non-symmetrical 1,10-bissilyldeca-1,3,5,7,9-pentaenes and the corresponding complementary alkenyl iodides has been developed. Reaction conditions for these bidirectional and orthogonal Hiyama-Denmark cross-coupling reactions of bisfunctionalized pentaenes are mild and the carotenoid products preserve the stereochemical information of the corresponding oligoene partners. The carotenoids synthesized in this manner include β,β-carotene and (3R,3'R)-zeaxanthin (symmetrical) as well as 9-cis-β,β-carotene, 7,8-dihydro-β,β-carotene and β-cryptoxanthin (non-symmetrical).

Highly Enantioselective Hiyama Cross-Coupling via Rh-Catalyzed Allylic Arylation of Racemic Allyl Chlorides

Highly enantioselective Hiyama cross-coupling reactions have been achieved through rhodium(I)-catalyzed dynamic kinetic asymmetric transformations between aryl siloxanes and cyclic racemic allyl halides. This process affords valuable enantiomerically enriched aryl-substituted cyclic allyl products and is compatible with heterocyclic allyl chloride electrophiles.

A Regio- and Stereodivergent Synthesis of Homoallylic Amines by a One-Pot Cooperative-Catalysis-Based Allylic Alkylation/Hofmann Rearrangement Strategy

Herein, we report a modular synthetic route to linear and branched homoallylic amines that operates through a sequential one-pot Lewis base/transition-metal catalyzed allylic alkylation/Hofmann rearrangement strategy. This protocol is operationally trivial, proceeds from simple and easily prepared substrates and catalysts, and enables all aspects of regio- and stereoselectivity to be controlled through a conserved experimental protocol. Overall, the high levels of enantio-, regio-, and diastereoselectivity obtained, in concert with the ability to access orthogonally protected or free amines, render this a straightforward and effective approach for the preparation of useful enantioenriched homoallylic amines. We have also demonstrated the utility of the products in the context of pharmaceutical synthesis.

Cross-Coupling of Heteroatomic Electrophiles

At the advent of cross-coupling chemistry, carbon electrophiles based on halides or pseudohalides were the only suitable electrophilic coupling partners. Almost two decades passed before the first cross-coupling reaction of heteroatom-based electrophiles was reported. Early work by Murai and Tanaka initiated investigations into silicon electrophiles. Narasaka and Johnson pioneered the way in the use of nitrogen electrophiles, while Suginome began the exploration of boron electrophiles. The chemistry reviewed within provides perspective on the use of heteroatomic electrophiles, specifically silicon-, nitrogen-, boron-, oxygen-, and phosphorus-based electrophiles in transition-metal catalyzed cross-coupling. For the purposes of this review, a loose definition of cross-coupling is utilized; all reactions minimally proceed via an oxidative addition event. Although not cross-coupling in a traditional sense, we have also included catalyzed reactions that join a heteroatomic electrophile with an in situ generated nucleophile. However, for brevity, those involving hydroamination or C-H activation as a key step are largely excluded. This work includes primary references published up to and including October 2018.

Photocatalytic C-H silylation of heteroarenes by using trialkylhydrosilanes

The efficient and selective C-H silylation of heteroarenes, especially the pharmaceutically relevant electron-deficient heteroarenes, represents a great challenge in organic synthesis. Herein we wish to report a distinctive visible light-promoted photocatalytic C-H silylation approach that enables the direct coupling of trialkylhydrosilanes with both electron-deficient and -rich heteroarenes as well as with cyano-substituted arenes in moderate to high yields and with good regioselectivity. The protocol features operational simplicity, mild reaction conditions, and the use of safe and readily available Na2S2O8, bis(trimethylsilyl) peroxide (BTMSPO) or iPr3SiSH as the radical initiators. Notably, the challenging bulky and inert trialkylhydrosilanes, such as (t-butyldimethyl)silane ( t BuMe2SiH) and (triisopropyl)silane (iPr3SiH), work smoothly with the protocol. Moreover, despite the higher stability of t BuMe2Si silylation products, our studies revealed their great reactivity and versatility in diverse C-Si-based chemical transformations, providing an operationally simple, low-cost, and environmentally benign synthetic technology for molecule construction and elaboration.

NBE-Controlled Palladium-Catalyzed Interannular Selective C-H Silylation: Access to Divergent Silicon-Containing 1,1'-Biaryl-2-Acetamides

A novel palladium-catalyzed interannular selective C-H silylation of 1,1'-biaryl-2-acetamides is described. The combination of palladium catalyst with copper oxidant enables meta- or ortho-selective C-H silylation by employing hexamethyldisilane as a trimethylsilyl source, which relies on the control of NBE derivatives as a switch, thus providing straightforward access to divergent silicon-containing 1,1'-biaryl-2-acetamides.

An enantioselective synthesis of α-alkylated pyrroles via cooperative isothiourea/palladium catalysis

Herein we describe the direct enantioselective Lewis base/Pd catalysed α-allylation of pyrrole acetic acid esters. This provides high isolated yields of highly enantioenriched products and exhibits broad reaction scope with respect to both reaction partners. The products can be readily elaborated in a manner which points towards potential applications in target directed synthesis.

Cascade reaction based synthetic strategies targeting biologically intriguing indole polycycles

In this review, cascade reaction based synthesis strategies delivering biologically intriguing indole polycycles are presented.

Comparative DFT study of metal-free Lewis acid-catalyzed C–H and N–H silylation of (hetero)arenes: mechanistic studies and expansion of catalyst and substrate scope

Direct selective dehydrogenative silylation of thiophenes, pyridines, indoles and anilines to synthesize silyl-substituted aromatic compounds catalyzed by metal-free Lewis acids was achieved recently. However, there is still insufficient mechanistic data for these transformations. Using density functional theory calculations, we conducted a detailed investigation of the mechanism of the B(C₆F₅)₃-catalyzed dehydrogenative silylation of N-methylindole, N,N-dimethylaniline and N-methylaniline. We successfully located the most favourable reaction pathways that can explain the experimental observations notably well. The most favourable pathway for B(C₆F₅)₃-catalyzed C–H silylation of N-methylindole includes nucleophilic attack, proton abstraction and hydride migration. The C–H silylation of N,N-dimethylaniline follows a similar pathway to N-methylindole rather than that proposed by Hou's group. Our mechanism successfully explains that the transformations of N-methylindoline to N-methylindole produce different products at different temperatures. For N-methylaniline bearing both N–H and para-phenyl C–H bonds, the N–H silylation reaction is more facile than the C–H silylation reaction. Our proposed mechanism of N–H silylation of N-methylaniline is different from that proposed by the groups of Paradies and Stephan. Lewis acids Al(C₆F₅)₃, Ga(C₆F₅)₃ and B(2,6-Cl₂C₆H₃)(p-HC₆F₄)₂ can also catalyze the C–H silylation of N-methylindole like B(C₆F₅)₃, but the most favourable pathways are those promoted by N-methylindoline. Furthermore, we also found several other types of substrates that would undergo C–H or N–H silylation reactions under moderate conditions. These findings may facilitate the design of new catalysts for the dehydrogenative silylation of inactivated (hetero)arenes.

We investigated the mechanism of the dehydrosilylation of (hetero)arenes and extended the scope of the silylation catalysts and substrates.

A colorimetric and “off–on” fluorescent Pd2+ chemosensor based on a rhodamine-ampyrone conjugate: synthesis, experimental and theoretical studies along with in vitro applications

We successfully designed and developed a rhodamine based “turn-on” chemosensor L for the detection of Pd²⁺ ions down to 1.19 × 10⁻⁵ M (11.9 μM).

Probing enantioselectivity in rhodium-catalyzed Si–C bond cleavage to construct silicon-stereocenters: a theoretical study

Density functional theory (DFT) calculations indicate that favorable oxidative addition/reductive elimination process from arylrhodium complex determines the enantioselectivity.

Recent advances in transition metal-catalysed cross-coupling of (hetero)aryl halides and analogues under ligand-free conditions

The formation of new bonds is pivotal in organic chemistry and a prerequisite to life because it allows the construction of complex molecules from simple precursors.

Silver-mediated oxidative functionalization of alkylsilanes

A general approach to the functionalization of aliphatic C-Si bonds in the presence of silver salts and oxidants has been reported. This strategy encompasses a range of valuable C-Si transformations, including the direct conversions of a C-Si bond to C-OCF3, C-OBz, C-OCOCF3, C-SCF3, C-SCN, and C-N3 bonds. Among them, trifluoromethoxylation of alkylsilanes is reported for the first time. In addition, mechanistic studies indicate that this reaction may proceed through a radical mechanism.

Silyl radical initiated radical cascade addition/cyclization: synthesis of silyl functionalized 4H-pyrido[4,3,2-gh]phenanthridin-5(6H)-ones

A cyclization cascade initiated by the addition of a silyl radical to an electron-deficient carbon-carbon double bond of N-arylacrylamides, followed by intramolecular cyano group insertion and homolytic aromatic substitution has been reported. In the presence of di-lauroyl peroxide (LPO), under metal-free conditions, several readily available hydrosilanes were successfully used as the source of silyl radicals and a series of silyl functionalized 4H-pyrido[4,3,2-gh]phenanthridin-5(6H)-ones were obtained in moderate to good yields.

Applications of SBA-15 supported Pd metal catalysts as nanoreactors in C-C coupling reactions

Nanoreactors are material structures with engineered internal cavities which create exclusive confined nanoscale surroundings for chemical reactions. The cavities of mesoporous silica SBA-15 can be used as nanoreactors for incorporating catalytic species such as metal nanoparticles, complexes etc. Since SBA-15 silica has a neutral framework, organic functional groups and heteroatoms have been embedded by direct or post-synthesis approaches in order to modify their functionality. Palladium is the most used transition metal for C-C bond formations. Because of the great importance of C-C coupling reactions, this review article aims at providing a deep insight into the state of art in the field of the synthesis and the application of mesoporous SBA-15 silica-supported Pd catalysts in C-C coupling transformations. In most cases, synthesis and modification of the catalyst, time and yield of reactions, recyclability and leaching of the Pd species from the SBA-15 support are discussed to reveal the role of SBA-15 in C-C coupling reactions.

Designing Cross-Coupling Reactions using Aryl(trialkyl)silanes

Organo(trialkyl)silanes have several advantages, including high stability, low toxicity, good solubility, easy handling, and ready availability compared with heteroatom-substituted silanes. However, methods for the cross-coupling of organo(trialkyl)silanes are limited, most probably because of their exceeding robustness. Thus, a practical method for the cross-coupling of organo(trialkyl)silanes has been a long-standing challenging research target. This article discusses how aryl(trialkyl)silanes can be used in cross-coupling reactions. A pioneering example is Cu^II catalytic conditions with the use of electron-accepting aryl- or heteroaryl(triethyl)silanes and aryl iodides. The reaction forms biaryls or teraryls. This design concept can be extended to Pd/Cu^II -catalyzed cross-coupling polymerization reactions between such silanes and aryl bromides or chlorides and to Cu^I -catalyzed alkylation using alkyl halides.