Enhanced adsorption performance of UiO-66 via modification with functional groups and integration into hydrogels

University of Oslo-66 (UiO-66) was a potential adsorbent for removing various pollutants from wastewater. Modifying the UiO-66 surface with different functional groups could enhance the adsorption performance. In this study, the UiO-66 modified with a functional group of -NH₂ or -NO₂ was prepared and tested to adsorb different pollutants. The results showed that -NO₂ modified UiO-66 increased the adsorption capacity of tetracycline by 17 times to 94.08 mg g^-1 compared with unmodified UiO-66. The adsorption process of UiO-66-NO₂ followed the pseudo-second-order adsorption kinetic model and Langmuir isotherm model with a maximum isotherm adsorption capacity of 127.32 mg g^-1. The adsorption interaction was hydrogen bonding and electrostatic attraction. The UiO-66-NO₂ also showed good adsorption performance to Co²⁺, Methylene blue, Congo red. Fixing UiO-66-NO₂ into hydrogel performed a stable absorption performance with a high absorption capacity (71.56 mg g^-1) to TC and a good regeneration rate (85%) after five cycles, providing a novel applicable way to remove pollutants from wastewater.

Coordination-Guided Conformational Locking of 1D Metal-Organic Frameworks for a Tunable Stimuli-Responsive Luminescence Region

One-dimensional (1D) metal-organic frameworks (MOFs) have shown great potential for designing more sensitive and smart stimuli-responsive photoluminescence metal-organic frameworks (PL-MOFs). Herein, we propose a strategy for constructing the 1D MOFs with tunable stimuli-responsive luminescence regions based on coordination-guided conformational locking. Two flexible 1D MOF microcrystals with trans- and cis-coordination modes, respectively, were synthesized by controlling the spatial constraint of solvents. The two 1D frameworks possess different conformation lockings of gain ligands, which have a great influence on the rotating restrictions and corresponding excited-state behaviors, generating the remarkably distinct color-tunable ranges (cyan-blue to green and cyan-blue to yellow, respectively). On this basis, the two 1D MOF materials, benefiting from the varied stimuli-responsive ranges, have displayed great potential in fulfilling the anticounterfeiting and information encryption applications. These results provide valuable guidance for the development of smart MOF-based stimuli-responsive materials in information identification and data encryption.

Multicomponent, Functionalized HKUST-1 Analogues Assembled via Reticulation of Prefabricated Metal-Organic Polyhedral Cavities

Metal–organic frameworks (MOFs) assembled from multiple building blocks exhibit greater chemical complexity and superior functionality in practical applications. Herein, we report a new approach based on using prefabricated cavities to design isoreticular multicomponent MOFs from a known parent MOF. We demonstrate this concept with the formation of multicomponent HKUST-1 analogues, using a prefabricated cavity that comprises a cuboctahedral Rh(II) metal–organic polyhedron functionalized with 24 carboxylic acid groups. The cavities are reticulated in three dimensions via Cu(II)-paddlewheel clusters and (functionalized) 1,3,5-benzenetricarboxylate linkers to form three- and four-component HKUST-1 analogues.

Heterometallic Molecular Complexes Act as Messenger Building Units to Encode Desired Metal-Atom Combinations to Multivariate Metal-Organic Frameworks

A novel synthetic approach is described for the targeted preparation of multivariate metal-organic frameworks (MTV-MOFs) with specific combinations of metal elements. This methodology is based on the use of molecular complexes that already comprise desired metal-atom combinations, as building units for the MTV-MOF synthesis. These units are transformed into the MOF structural constituents through a ligand/linker exchange process that involves structural modifications while preserving their originally encoded atomic combination. Thus, through the use of heterometallic ring-shaped molecules combining gallium and nickel or cobalt, we have obtained MOFs with identical combinations of the metal elements, now incorporated in the rod-shaped secondary building unit, as confirmed with a combination of X-ray and electron diffraction, electron microscopy, and X-ray absorption spectroscopy techniques.

Influence of the Synthesis and Crystallization Processes on the Cation Distribution in a Series of Multivariate Rare-Earth Metal-Organic Frameworks and Their Magnetic Characterization

The incorporation of multiple metal atoms in multivariate metal-organic frameworks is typically carried out through a one-pot synthesis procedure that involves the simultaneous reaction of the selected elements with the organic linkers. In order to attain control over the distribution of the elements and to be able to produce materials with controllable metal combinations, it is required to understand the synthetic and crystallization processes. In this work, we have completed a study with the RPF-4 MOF family, which is made of various rare-earth elements, to investigate and determine how the different initial combinations of metal cations result in different atomic distributions in the obtained materials. Thus, we have found that for equimolar combinations involving lanthanum and another rare-earth element, such as ytterbium, gadolinium, or dysprosium, a compositional segregation takes place in the products, resulting in crystals with different compositions. On the contrary, binary combinations of ytterbium, gadolinium, erbium, and dysprosium result in homogeneous distributions. This dissimilar behavior is ascribed to differences in the crystallization pathways through which the MOF is formed. Along with the synthetic and crystallization study and considering the structural features of this MOF family, we also disclose here a comprehensive characterization of the magnetic properties of the compounds and the heat capacity behavior under different external magnetic fields.

Metal organic framework-based antibacterial agents and their underlying mechanisms

Bacteria, as the most abundant living organisms, have always been a threat to human life until the development of antibiotics. However, with the wide use of antibiotics over a long time, bacteria have gradually gained tolerance to antibiotics, further aggravating threat to human beings and environmental safety significantly. In recent decades, new bacteria-killing methods based on metal ions, hyperthermia, free radicals, physical pricks, and the coordination of several multi-mechanisms have attracted increasing attention. Consequently, multiple types of new antibacterial agents have been developed. Among them, metal organic frameworks (MOFs) appear to play an increasingly important role. The unique characteristics of MOFs make them suitable multiple-functional platforms. By selecting the appropriate metastable coordination bonds, MOFs can act as reservoirs and release antibacterial metal ions or organic linkers; by constructing a porous structure, MOFs can act as carriers for multiple types of agents and achieve slow and sustained release; and by designing their composition and the pore structure precisely, MOFs can be endowed with properties to produce heat and free radicals under stimulation. Importantly, in combination with other materials, MOFs can act as a platform to kill bacteria effectively through the synergistic effect of multiple types of mechanisms. In this review, we focus on the recent development of MOF-based antibacterial agents, which are classified according to their antibacterial mechanisms.

Synthesis of Metal–Organic Frameworks Quantum Dots Composites as Sensors for Endocrine-Disrupting Chemicals

Hazardous chemical compounds such as endocrine-disrupting chemicals (EDCs) are widespread and part of the materials we use daily. Among these compounds, bisphenol A (BPA) is the most common endocrine-disrupting chemical and is prevalent due to the chemical raw materials used to manufacture thermoplastic polymers, rigid foams, and industrial coatings. General exposure to endocrine-disrupting chemicals constitutes a serious health hazard, especially to reproductive systems, and can lead to transgenerational diseases in adults due to exposure to these chemicals over several years. Thus, it is necessary to develop sensors for early detection of endocrine-disrupting chemicals. In recent years, the use of metal–organic frameworks (MOFs) as sensors for EDCs has been explored due to their distinctive characteristics, such as wide surface area, outstanding chemical fastness, structural tuneability, gas storage, molecular separation, proton conductivity, and catalyst activity, among others which can be modified to sense hazardous environmental pollutants such as EDCs. In order to improve the versatility of MOFs as sensors, semiconductor quantum dots have been introduced into the MOF pores to form metal–organic frameworks/quantum dots composites. These composites possess a large optical absorption coefficient, low toxicity, direct bandgap, formidable sensing capacity, high resistance to change under light and tunable visual qualities by varying the size and compositions, which make them useful for applications as sensors for probing of dangerous and risky environmental contaminants such as EDCs and more. In this review, we explore various synthetic strategies of (MOFs), quantum dots (QDs), and metal–organic framework quantum dots composites (MOFs@QDs) as efficient compounds for the sensing of ecological pollutants, contaminants, and toxicants such as EDCs. We also summarize various compounds or materials used in the detection of BPA as well as the sensing ability and capability of MOFs, QDs, and MOFs@QDs composites that can be used as sensors for EDCs and BPA.

Straightforward Mechanosynthesis of a Phase-Pure Interpenetrated MOF-5 Bearing a Size-Matching Tetrazine-Based Linker

The archetypal metal-organic framework-5 (MOF-5 or IRMOF-1) has been explored as a benchmark sorbent material with untapped potential to be studied in the capture and storage of gases and chemical confinement. Several derivatives of this framework have been prepared using the multivariate (MTV) strategy through mixing size-matching linkers to isolate, for example, MIXMOFs that outperform same-linker congeners when employed as gas reservoirs. Herein, we describe a straightforward protocol that uses mechanosynthesis (solvent-free grinding) followed by mild activation in dimethylformamide (DMF)/CHCl₃ (40 °C and ambient pressure) to synthesize a functional phase-pure interpenetrated MOF-5 (int-MOF-5) bearing the size-matching 1,4-benzene dicarboxylate (BDC) and 1,2,4,5-tetrazine-3,6-dicarboxylate (TZDC) linkers in the backbone of the interpenetrated MIXMOF. We found that the grinding involving a mixture of H₂TZDC and H₂BDC in a 1:4 ratio (20% of H₂TZDC) in the presence of zinc(II) acetate yields a crystalline solid that upon activation forms a phase-pure int-MOF-5 herein referred to as 20%TZDC-MOF-5. The crystalline phase, thermal stability, and porous structure of 20%TZDC-MOF-5 were thoroughly characterized, and the gas adsorption performance of the MIXMOF was investigated through the isotherms of N₂ and H₂ at 77 K and CO₂ at 273 and 296 K. The pore size distribution for 20%TZDC-MOF-5 was found to be very similar to that determined using single crystals of the same-linker int-MOF-5. The presence of TZDC in the MIXMOF led to a slight increase in the uptake values for both H₂ and CO₂, suggesting that beneficial interactions take place. To the best of our knowledge, this is the first report presenting a suitable protocol to yield a functionalized int-MOF-5 as a promising means of synergistically fine-tuning the confinement of small target molecules such as CO₂ and H₂.

Portable visual assay of Bacillus anthracis biomarker based on ligand-functionalized dual-emission lanthanide metal-organic frameworks and smartphone-integrated mini-device

A single-functionalized ligand single-Ln³⁺ based dual-emission Ln-MOF fluorescent sensor was established for portable and visual dipicolinic acid (DPA, Bacillus anthracis biomarker) detection. First, a theory calculation-based prediction model was developed for designing single-functionalized ligand single-Ln³⁺ dual-emission Ln-MOFs. The model consisted of three calculation modules: intramolecular hydrogen bonds, excited state energy levels, and coordination stability with Ln³⁺ of ligands. Tb³⁺ and Eu³⁺ were selected as metal luminescence centers, PTA-X (PTA: p-phthalic acid, X = NH₂, CH₃, H, OH) with different functional groups as one-step functionalization ligands, and the luminescent feature of four Tb-MOFs and four Eu-MOFs was predicted with the model. Coupled with prediction results and experimental verification results, Tb-PTA-OH was rapidly determined to be the sole dual-emission Ln-MOF. Then, Tb-PTA-OH was applied to DPA detection by ratiometric fluorescence, and an ultra-low limit of detection (13.4 nM) was obtained, which is much lower than the lowest anthrax infectious dose (60 μM). A portable visual assay method based on paper-microchip and smartphone integrated mini-device was further established (limit of qualification 0.48 μM). A new sensing mechanism and a "triple gates" selectivity mechanism to DPA were proposed. This work reveals guidelines for material design and mini-device customization in detecting hazardous substances.

Metal-Organic Frameworks Functionalized Separators for Lithium-Sulfur Batteries

Lithium sulfur batteries (LSBs) have attracted tremendous attention owing to their high theoretical specific capacity and specific energy. However, their practical applications are hindered by poor cyclic life, mainly caused by polysulfide shuttling. The development of advanced materials to mitigate the polysulfide shuttling effect is urgently demanded. Metal-organic frameworks (MOFs) have been exploited as multifunctional materials for the decoration of separators owing to their high surface area, structural diversity, tunable pore size, and easy tailor ability. In this review, we aim to present the state-of-the-art MOF-based separators for LSBs. Particular attention is paid to the rational design (pore aperture, metal node, functionality, and dimension) of MOFs with enhanced ability for anchoring polysulfides and facilitating Li⁺ transportation. Finally, the challenges and perspectives are provided regarding to the future design MOF-based separators for high-performance LSBs.

Synthesis, Structure, and Thermal Stability of a Mesoporous Titanium(III) Amine-Containing MOF

The first mesoporous bimetallic Ti^III/Al metal-organic framework (MOF) containing amine functionalities on its linkers has been selectively obtained by converting the cheap commercially available (TiCl₃)₃AlCl₃ into Ti_3-xAl_xCl₃(THF)₃ and reacting this complex with 2-aminoterephthalic acid in dimethylformamide (DMF) under soft solvothermal conditions. This compound is structurally related to the previously described NH₂-MIL-101(M) (M = Cr, Al, and Fe) MOFs. Thermal gravimetric analyses and in situ powder X-ray diffraction (PXRD) measurements demonstrated that this highly air-sensitive Ti^III-containing MOF is structurally stable up to 200 °C. Nuclear magnetic resonance (NMR) spectroscopy, elemental analysis, and inductively coupled plasma (ICP) revealed that NH₂-MIL-101(Ti^III) contains trinuclear Ti₃(μ₃-O)Cl(DMF)₂(RCOO)₆ clusters with strongly bound DMF molecules and a small amount of aluminum. Sorption experiments revealed a higher affinity of this MOF for hydrogen compared to the previously described monometallic unfunctionalized MIL-101(Ti^III) MOF.

Synthesis of various dimensional metal organic frameworks (MOFs) and their hybrid composites for emerging applications - A review

Metal organic frameworks (MOFs) represent the organic and inorganic hybrid porous materials. MOFs are low dense and highly porous materials which in turn provide large surface area that can accumulate and store numerous molecules within the pores. The pore size may also act as a mesh to separate molecules. The porous nature of MOFs is beneficial for altering the intrinsic properties of the materials. Over the past decade, different types of hybrid MOFs have been reported in combination with polymers, carbon materials, metal nanoparticles, metal oxides, and biomolecules for various applications. MOFs have also been used in the fabrication of electronic devices, sensors, energy storage, gas separation, supercapacitors, drug delivery and environmental clean-up. In this review, the unique structural orientation, exceptional properties and recent applications of MOFs have been discussed in the first section along with their porosity, stability and other influencing factors. In addition, various methods and techniques involved in the synthesis and designing of MOFs such as solvothermal, electrochemical, mechanochemical, ultrasonication and microwave methods are highlighted. In order to understand the scientific feasibility of MOFs in developing new products, various strategies have been applied to obtain different dimensional MOFs (0D, 1D, 2D and 3D) and their composite materials are also been conferred. Finally, the future prospects of MOFs, remaining challenges, research gaps and possible solutions that need to be addressed by advanced experimental design, computational models, simulation techniques and theoretical concepts have been deliberated.

Dynamic network of intermolecular interactions in metal-organic frameworks functionalized by molecular machines

Molecular machines enable external control of structural and dynamic phenomena at the atomic level. To efficiently transfer their tunable properties into designated functionalities, a detailed understanding of the impact of molecular embedding is needed. In particular, a comprehensive insight is fundamental to design hierarchical multifunctional systems that are inspired by biological cells. Here, we applied an on-the-fly trained force field to perform atomistic simulations of a systematically modified rotaxane functionalized metal-organic framework. Our atomistic studies reveal a symmetric and asymmetric interplay of the mechanically bonded rings (MBRs) within the framework depending on the local environment. As a result, their translational motion is modulated ranging from fast oscillatory behavior to cooperative and potentially directed shuttling. The derived picture of competitive interactions, which influence the operation mechanism of the MBRs embedded in these soft porous materials, promotes the development of responsive functional materials, which is a key step toward intelligent matter.

Enhancing of CO Uptake in Metal-Organic Frameworks by Linker Functionalization: A Multi-Scale Theoretical Study

In the present work, the interaction strength of Carbon Monoxide (CO) with a set of forty-two, strategically selected, functionalized benzenes was calculated. Our ab initio calculations at the MP2/6-311++G** level of theory reveal that phenyl hydrogen sulfate (-OSO3H) showed the highest interaction with CO (−19.5 kJ/mol), which was approximately three times stronger compared with the unfunctionalized benzene (−5.3 kJ/mol). Moreover, the three top-performing functional groups (-OSO3H, -OPO3H2, -SO3H) were selected to modify the organic linker of IRMOF-8 and test their ability to capture CO at 298 K for a wide pressure range. Our Grand Canonical Monte Carlo (GCMC) simulations showed a significant increase in the CO uptake in the functionalized MOFs compared with the parent IRMOF-8. It is distinctive that for the volumetric uptake, a 60× increase was observed at 1 bar and 2× was observed at 100 bar. The proposed functionalization strategy can be applied for improving the CO uptake performance not only in MOFs but also in various other porous materials.

Mixed-Ligand Metal-Organic Frameworks for All-in-One Theranostics with Controlled Drug Delivery and Enhanced Photodynamic Therapy

Mixed-ligand metal-organic frameworks (MOFs) multiply the properties and improve the versatility of conventional MOFs for theranostic applications. A tumor targeting and tumoral microenvironment-responsive system is significant for specific and efficient cancer theranostics. Herein, we report a kind of versatile mixed-porphyrin ligand MOF as a multifunctional matrix for multimodality-imaging-guided synergistic therapy. Tetrakis(4-carboxyphenyl)porphyrin (TCPP) shows the properties of fluorescence (FL) and photodynamic therapy (PDT), while Mn-TCPP owns magically the properties of T1-weighted magnetic resonance (MR) imaging and photothermal conversion for photothermal imaging and photothermal therapy (PTT). Because of the same coordination capacity and mode of TCPP and Mn-TCPP to Zr4+ ions, MOFs with adjustable ligand ratios were easily prepared. The mixed-ligand MOFs exhibited a high drug loading capacity for 10-hydroxycamptothecin (HCPT, 65%). After modification with hyaluronic acid (HA) through a disulfide bond (-S-S-), the MOF-S-S-HA composites possess enhanced PDT and tumor-targeted redox-responsive drug release properties due to the -S-S- bond. Thus, excellent fluorescence, MR, and photothermal trimodality imaging, redox-responsive drug release, and enhanced PDT/PTT are integrated together in the mixed-ligand MOFs as "all-in-one" theranostic agents.

Electrocatalytic water oxidation from a mixed linker MOF based on NU-1000 with an integrated ruthenium-based metallo-linker

A novel tetratopic metallo-linker, [Ru(tda)(py(PhCOOH)₂)₂], 1, (tda = 2,2':6',2''-terpyridine-6,6''-dicarboxylate; py(PhCOOH)₂ = (4,4'-(pyridine-3,5-diyl)dibenzoic acid), that is structurally based on one of the most active molecular water oxidation catalysts has been prepared and fully characterized, including single crystal X-ray diffraction. 1 bears geometric similarities to H₄TBAPy (H₄TBAPy = 4,4',4'',4'''-(pyrene-1,3,6,8-tetrayl)tetrabenzoic acid), i.e. the native linker in NU-1000, which offers the possibility to synthesize NU-1000-Ru mixed linker MOFs solvothermally. Mixed linker MOF formation was demonstrated by powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM), and Ru linker incorporation confirmed by FT-IR, energy-dispersive X-ray (EDX) spectroscopy and inductively coupled plasma optical emission spectroscopy (ICP-OES). It was found that the Ru contents in the final mixed linker MOFs correlate with the amount of Ru linker present during solvothermal synthesis, albeit not in a linear fashion. The cyclic voltammograms (CV) of the mixed linker MOFs are largely dominated by TBAPy-based oxidations with features attributed to 1. Interestingly, Ru linkers near the crystal surface are oxidized directly by interfacial hole transfer form the electrode, while those in the crystal interior can be oxidized indirectly from oxidized TBAPy linkers at more anodic potential. Upon repeated scanning, the CVs show the appearance of new waves that arise from irreversible TBAPy oxidation, as well as from the activation of the Ru-based water oxidation catalyst. Of the materials prepared, the one with the highest Ru content, NU-1000-Ru_high, was shown to catalyze the electrochemical oxidation of water to dioxygen. The Faradaic efficiency (FE) of the construct is 37%, due to water oxidation being accompanied by oxidative transformations of the TBAPy linkers. Despite the low FE, NU-1000-Ru_high is still among the best MOF-based water oxidation catalysts, operating by a unique co-linker mediated hole-transport mechanism to supply oxidizing equivalents also to catalysts in the crystal interior.

Two-Dimensional Metal-Organic Framework Nanosheets: Synthesis and Applications in Electrocatalysis and Photocatalysis

Two-dimensional metal-organic nanosheets (2D MONs) are an emerging class of ultrathin, porous, and crystalline materials. The organic/inorganic hybrid nature offers MONs distinct advantages over other inorganic nanosheets in terms of diversity of organic ligands and metal notes. Compared to bulk three-dimensional metal-organic frameworks, 2D MONs possess merits of high density and readily accessible catalytic sites, reduced diffusion pathways for reactants/products, and fast electron transport. These features endow MONs with enhanced physical/chemical properties and are ideal for heterogeneous catalysis. In this Review, state-of-the-art synthetic methods for the fabrication of 2D MONs were summarized. The advances of 2D MONs-based materials for electrocatalysis and photocatalysis, including hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO₂ RR), and electro-/photocatalytic organic transformations were systematically discussed. Finally, the challenges and perspectives regarding future design and synthesis of 2D MONs for high-performance electrocatalysis and photocatalysis were provided.

Nanofused Hierarchically Porous MIL-101(Cr) for Enhanced Methyl Orange Removal and Improved Catalytic Activity

Hierarchically porous MIL-101(Cr) (H-MIL-101(Cr)) with meso/macro-pores was directly prepared via nanofusion progress by using butyric acid as a modulating agent. In the methyl orange (MO) adsorption experiments, H-MIL-101(Cr) showed a high adsorption capability of 369.8 mg g⁻¹, which was 1.52-fold greater than that of pristine MIL-101(Cr) (P-MIL-101(Cr)). While in the oxidation reaction of indene and 1-dodecene tests, H-MIL-101(Cr) presented much higher catalytic efficiency, with turnover frequency (TOF) values of 0.7242 mmol g⁻¹ min⁻¹ and 0.1492 mmol g⁻¹ min⁻¹, respectively, which were 28% and 34% greater than that in the case of P-MIL-101(Cr). Thus, compared with P-MIL-101(Cr), H-MIL-101(Cr) exhibited better removal efficiency and higher levels of activity in the oxidation reactions of indene and 1-dodecene. The unique structure of H-MIL-101(Cr) also contributed to its superior performance in these processes.

Tuning the Photocatalytic Activity of Ti-Based Metal-Organic Frameworks through Modulator Defect-Engineered Functionalization

Defect engineering is a valuable tool to tune the photocatalytic activity of metal-organic frameworks (MOFs). Inducing defects through the attachment of functionalized modulators can introduce cooperative units that can tune the bandgap of the material and enhance their chemical, thermal, and photostabilities among other properties. However, the majority of defect engineering studies for photocatalytic applications are limited to Zr-based MOFs, and there is still a lack of interrelation between synthetic variables, the resultant MOF properties, and their effect on their photocatalytic performance. We report a comprehensive study on the defect engineering of the titanium heterometallic MOF MUV-10 by fluoro- and hydroxy-isophthalic acid (Iso) modulators, rationalizing the effect of the materials' properties on their photocatalytic activity for hydrogen production. The Iso-OH modified MOFs present a volcano-type profile with a 2.3-fold increase in comparison to the pristine materials, whereas the Iso-F modified samples have a gradual increase with up to a 4.2-fold enhancement. It has been demonstrated that ∼9% of Iso-OH modulator incorporation produces ∼40% defects, inducing band gap reduction and longer excited states lifetime. Similar defect percentages have been generated upon near 40% Iso-F modulator incorporation; however, negligible band gap changes and shorter excited states lifetimes were determined. The higher photocatalytic activity in Iso-F modulator derived MOF has been attributed to the effect of the divergent defect-compensation modes on the materials' photostability and to the increase in the external surface area upon introduction of Iso-F modulator.

Customized Synthesis: Solvent- and Acid-Assisted Topology Evolution in Zirconium-Tetracarboxylate Frameworks

Metal-organic frameworks (MOFs) demonstrate strong potential for various important applications due to their well tunable structures and compositions through metal and organic linker engineering. As an effective approach, topology evolution by controlling linker conformation has received considerable attention, where solvents and acids have crucial effects on structural formation. However, a systematic study of such effects remains under investigated. Herein, we carried out a methodical study on the topology evolution in Zr-MOFs directed by solvothermal conditions with various combinations of three common solvents and six different acids. As a result, three Zr-MOFs with different topologies, scu (HIAM-4007), scp (HIAM-4008), and csq (HIAM-4009), were obtained using the same Zr₆-cluster and tetratopic carboxylate linker, in which structure diversity shows significant influence on their corresponding photoluminescence quantum yields. Further experiments revealed that the acidity of acids and the basicity of solvents strongly influenced the linker conformation in the resultant MOFs, leading to the topology evolution. Such a solvent- and acid-assisted topology evolution represents a general approach that can be used with other tetratopic carboxylate linkers to realize structural diversity. The present work demonstrates an effective structure designing strategy by controlling synthetic conditions, which may prove to be powerful for customized synthesis of MOFs with specific structure and functionality.

The pioneering role of metal-organic framework-5 in ever-growing contemporary applications - a review

MOF-5 with a Zn(ii) cluster and terephthalic acid is a distinctive porous material among the metal–organic frameworks (MOFs), with unique physical, chemical and mechanical properties. MOF-5 based composites possess ample applications in modern chemistry. Huge surface area, suitable pore dimensions and scope of tunability make MOF-5 noteworthy in advanced materials. The extensive features of MOF-5 provided an opportunity for researchers to explore atomic/molecular scale materials. Various MOF-5 based composites have been designed with revamped properties appropriate to the application by altering and fabricating MOF-5 in situ or using a post-synthetic approach. Surface modification via the dispersion and impregnation of active substances into the pores of MOF-5 enhances its applicability. The boundless topologies and morphologies of MOF-5 combined with other chemical entities has provided opportunities in various fields, including catalysis, gas storage and sensors. The present review illuminates the leading role of MOF-5 and its composites in contemporary applications based on the current literature in heterogeneous catalysis, H₂ and CO₂ storage and sensors.

MOF-5 with a Zn(ii) cluster and terephthalic acid is a distinctive porous material among the metal–organic frameworks (MOFs), with unique physical, chemical and mechanical properties.

Designing Multicomponent Metal-Organic Frameworks with Hierarchical Structure-Mimicking Distribution for High CO2 Capture Performance

By utilizing a mixed-ligand strategy, a novel multicomponent Cu-metal-organic framework (MOF) (JLU-MOF107) has been successfully synthesized. JLU-MOF107 has an unusual hierarchical structure-mimicking distribution structure. The triangular 4,4',4″-benzene-1,3,5-triyl-tribenzoate (BTB) ligand and the binuclear Cu cluster form a threefold interpenetration layer, while the linear ligand 1,4-phenylene-4,4'-bis(1,2,4-triazole) (p-tr₂ph) and tetranuclear Cu cluster form a noninterpenetration pillared-layer structure. Then, the two types of layers are connected by tetranuclear Cu clusters to construct the final sandwichlike framework. JLU-MOF107 exhibits good water and humidity stability. Due to the presence of various active sites and pores, JLU-MOF107 shows an outstanding performance for CO₂ capture (171.0 cm³ g^-1 at 273 K). Density functional theory (DFT)-based calculations further prove the interactions between CO₂ molecules and multiple active sites. The innovative synthesis of this multicomponent structure offers a new perspective on making hierarchical porous materials and multifunctional MOFs.

Mixed Metal-Organic Framework Stationary Phases for Liquid Chromatography

Strategic design of the stationary phase in liquid chromatography (LC) is crucial for modern separation science. Herein, a design approach using mixed metal-organic frameworks (MOFs) as tunable LC stationary phases is proposed. Three MOFs with an isostructural pillared-layer structure are employed, with pore sizes tuned by the systematic design of the constituent ligands, using 1,4-benzenedicarboxylate (bdc), 1,4-naphthalenedicarboxylate (ndc), and 9,10-anthracenedicarboxylate (adc). Packed columns filled with the MOFs and their mixed-particle/solid-solution stationary phases are prepared and examined for the retention capability of polyethylene glycol (PEG) in LC. While the MOF-packed columns filled with binary mixtures of different MOF particles provide good control of the retention with respect to the particle mixing ratio, the columns filled with mixed-linker solid-solution MOFs show a significant multicomponent effect on the retention behavior. Specifically, mixed-linker solid-solution MOFs consisting of bdc/ndc binary ligands are found to show a strong retention that surpasses even their parent MOFs, namely, pure bdc- and ndc-MOF stationary phases. The retention behavior on the MOF-packed columns is explained by the specific nanostructures of the solid-solution MOFs, which affects the balance between substrate affinity and adsorption kinetics into the MOF pores, dictating the total retention capability. The results provide an extra dimension for stationary phase design using MOFs as a promising recognition medium for LC.

Adsorptive removal of organic dyes via porous materials for wastewater treatment in recent decades: A review on species, mechanisms and perspectives

Organic dyes, a type of high toxic and carcinogenic chemicals that present severe threats to human and aquatic life, are the most commonly seen organic pollutants in wastewater of industries such as textile, rubber, cosmetic industry etc. Various techniques for the removal of dyes are compared in this review. Adsorption has proven to be a facile and promising approach for the removal of dyes in wastewater. This work focuses on the latest development of various porous materials for the adsorption of organic dyes. The characteristics, functionalization and modification of different porous materials are also presented. Furthermore, adsorption behaviors and mechanism of these adsorbents in the adsorption of organic dyes are critically reviewed. Finally, challenges and opportunities for future research in the development of novel materials for the highly efficient removal of dyes are proposed.

Metal-Organic Polyhedra as Building Blocks for Porous Extended Networks

Metal-organic polyhedra (MOPs) are a subclass of coordination cages that can adsorb and host species in solution and are permanently porous in solid-state. These characteristics, together with the recent development of their orthogonal surface chemistry and the assembly of more stable cages, have awakened the latent potential of MOPs to be used as building blocks for the synthesis of extended porous networks. This review article focuses on exploring the key developments that make the extension of MOPs possible, highlighting the most remarkable examples of MOP-based soft materials and crystalline extended frameworks. Finally, the article ventures to offer future perspectives on the exploitation of MOPs in fields that still remain ripe toward the use of such unorthodox molecular porous platforms.

Multivariate Strategy Preparation of Nanoscale Ru-Doped Metal-Organic Frameworks with Boosted Photoactivity for Bioimaging and Reactive Oxygen Species Generation

How to incorporate chromophores into MOFs is a key for the development of multifunctional photoactive systems. The poor internalization by cancer cells and low efficiency of ROS generation hamper the potential clinic application of Ru-based molecular agents. In this work, a nanoscale Ru-doped metal-organic framework Hf-UiO-Ru (Hf-Ru) with framework-boosted photoactivities was prepared via a multivariate strategy for use in bioimaging and ROS generation. The as-synthesized Hf-Ru nanocrystals not only maintain the well regular morphology and crystal structure in comparison with that of the Hf-UiO-66 prototype but also give an oxygen-independent emission with a much longer lifetime, higher quantum yield, and stronger ROS generation than molecular Ru(dcbpy)₃. Additionally, the enhanced cellular uptake and high brightness in fluorescence and CT imaging of Hf-Ru nanocrystals have also been well studied in vitro. This multivariate strategy may be utilized as a general paradigm to develop a photoactive nanosystem for bioimaging and cancer treatment.

Large Cages of Zeolitic Imidazolate Frameworks

The design and synthesis of permanently porous materials with extended cage structures is a long-standing challenge in chemistry. In this Account, we highlight the unique role of zeolitic imidazolate frameworks (ZIFs), a class of framework materials built from tetrahedral nodes connected through imidazolate linkers, in meeting this challenge and illustrate specific features that set ZIFs apart from other porous materials. The structures of ZIFs are characteristic of a variety of large, zeolite-like cages that are covalently connected with neighboring cages and fused in three-dimensional space. In contrast to molecular cages, the fusion of cages results in extraordinary architectural and chemical stability for the passage of gases and molecules through cages and for carrying out chemical reactions within these cages while keeping the cages intact. The combination of the advantages from both cage chemistry and extended structures allows uniquely interconnected yet compartmentalized void spaces inside ZIF solids, rendering their wide range of applications in catalysis, gas storage, and gas separation.While the field of ZIFs has seen rapid development over the past decade, with hundreds of ZIF structures built from dozens of different cages of varying composition, size, and shapes reported, rational approaches to their design are largely unknown. In this Account, we summarize a vast number of cages formed in reported ZIFs and then review how the thermodynamic factors and traditional guest-templating strategies from zeolites influence the formation of cages. We highlight how the link-link interactions perform in the ZIF formation mechanism and serve as a means to target the formation of frameworks containing cages of specific sizes with structures exhibiting a level of complexity as yet unachieved in discrete coordination cages. For example, the giant ucb cage features a dimension of 46 Å and the complex moz cage is constructed from as many as 660 components.With the finding of these large and complex cages in ZIFs, we envision that the collection of cage structures will further be diversified by a mixed-linker approach utilizing a more complex combination of link-link interactions or by creating multivariant (MTV) systems that have been realized in other framework materials yet not widely employed in ZIFs. The more complicated cage structures can provide extra variations in chemical environments, and in addition to that, MTV systems can generate inhomogeneity inside each type of cage structure. The fused cages at such complexity that are difficult to be realized in solution environments will potentially enable more complex materials for smart applications.

Spatial distribution modulation of mixed building blocks in metal-organic frameworks

The placement of mixed building blocks at precise locations in metal-organic frameworks is critical to creating pore environments suitable for advanced applications. Here we show that the spatial distribution of mixed building blocks in metal-organic frameworks can be modulated by exploiting the different temperature sensitivities of the diffusion coefficients and exchange rate constants of the building blocks. By tuning the reaction temperature of the forward linker exchange from one metal-organic framework to another isoreticular metal-organic framework, core-shell microstructural and uniform microstructural metal-organic frameworks are obtained. The strategy can be extended to the fabrication of inverted core-shell microstructures and multi-shell microstructures and applied for the modulation of the spatial distribution of framework metal ions during the post-synthetic metal exchange process of a Zn-based metal-organic framework to an isostructural Ni-based metal-organic framework.

Multivariate metal-organic framework MTV-MIL-101 via post-synthetic cation exchange: is it truly achievable?

The post-synthetic exchange (PSE) method is a well-proven route to replace, modify, and add different functionalities to metal-organic frameworks (MOFs). Particularly, the solvent-assisted cation substitution (SACS) technique has been reported to prepare mixed-metal multivariate metal-organic frameworks (MTV-MOFs). However, such a technique does not apply to all types of MOFs. In 2013, Szilágyi et al. reported the achievement of the mixed-metal MTV-MIL-101 framework via PSE. Since then, a debate has been taking place about the validity of these findings. On the other hand, the attainment of the mixed-metal MIL-101 was reported to be obtainable through the direct synthesis, which is, to some, the only way to achieve it. Here, we settle this dispute by investigating Szilágyi's method not only as described, but also at extended conditions of time and different metal precursors: all attempts were vain. However, by reconsidering the refluxing solvent (dimethylformamide "DMF" instead of water) and the applied reaction conditions (110 °C-20 h), mixed-metal MIL-101(Cr/Fe) was achieved via a simple PSE method.

Preparation of multivariate zirconia metal-organic frameworks for highly efficient adsorption of endocrine disrupting compounds

Owing to their structural and functional tunability, the preparation of multivariate metal-organic frameworks (MTV-MOFs) and investigation of their potential application has become a hot topic in fields of environment and energy. To achieve more adsorption and removal performance, a series of multivariate Zr-MOFs (TCPP@MOF-808s) were prepared via mixed-ligands strategy for the first time. The morphology, as well as adsorption and removal properties of TCPP@MOF-808s can be controlled by adjusting ratio of the linkers. 57%TCPP@MOF-808 could provide ideal appearance with excellent stability. By using 57%TCPP@MOF-808 as sorbent, a dispersive solid-phase extraction (dSPE) was developed for extraction of endocrine disrupting compounds (EDCs) including BPA, 17β-E2, 17α-E2, E1, and HEX from environmental water prior to HPLC analysis. The pseudo-second-order model can describe the adsorption kinetic data well. Using Langmuir isotherm model, the maximum adsorption capacities of BPA, 17β-E2, 17α-E2, and E1 were calculated as 94.34, 104.17, 109.89, and 121.95 mg·g^-1, respectively. The LODs for the analysis of EDCs with HPLC-DAD by using 57%TCPP@MOF-808 as sorbent were achieved in the range of 0.01-0.03 ng·mL^-1. The recoveries were obtained in the range of 74.63-98.00%. Enrichment factors were calculated in the range of 146-312. This work provides an effective strategy for design and preparation of multifunctional nanomaterials to improve their potential applications in the detection of environmental pollutants.

Multivariate sodalite zeolitic imidazolate frameworks: a direct solvent-free synthesis

Different mixed-ligand Zeolitic Imidazolate Frameworks (ZIFs) with sodalite topology, i.e. isoreticular to ZIF-8, unachievable by conventional synthetic routes, have been prepared using a solvent-free methodology. In particular, the versatility of this method is demonstrated with three different metal centres (Zn, Co and Fe) and binary combinations of three different ligands (2-methylimidazole, 2-ethylimidazole and 2-methylbenzimidazole). One combination of ligands, 2-ethylimidazole and 2-methylbenzimidazole, results in the formation of SOD frameworks for the three metal centres despite this topology not being obtained for the individual ligands. Theoretical calculations confirm that this topology is the lowest in energy upon ligand mixing.

PoreMatMod.jl: Julia Package for in Silico Postsynthetic Modification of Crystal Structure Models

PoreMatMod.jl is a free, open-source, user-friendly, and documented Julia package for modifying crystal structure models of porous materials such as metal-organic frameworks (MOFs). PoreMatMod.jl functions as a find-and-replace algorithm on crystal structures by leveraging (i) Ullmann's algorithm to search for subgraphs of the crystal structure graph that are isomorphic to the graph of a query fragment and (ii) the orthogonal Procrustes algorithm to align a replacement fragment with a targeted substructure of the crystal structure for installation. The prominent application of PoreMatMod.jl is to generate libraries of hypothetical structures for virtual screenings. For example, one can install functional groups on the linkers of a parent MOF, mimicking postsynthetic modification. Other applications of PoreMatMod.jl to modify crystal structure models include introducing defects with precision and correcting artifacts of X-ray structure determination (adding missing hydrogen atoms, resolving disorder, and removing guest molecules). The find-and-replace operations implemented by PoreMatMod.jl can be applied broadly to diverse atomistic systems for various in silico structural modification tasks.

Framework-Shrinkage-Induced Wavelength-Switchable Lasing from a Single Hydrogen-Bonded Organic Framework Microcrystal

Porous organic materials (POMs) have shown great potential for fabricating tunable miniaturized lasers. However, most pure-POM micro/nanolasers are achieved via coordination interactions, during which strong charge exchanges inevitably destroy the intrinsic gain property and even lead to optical quenching, hindering their practical applications. Herein, we reported on an approach to realize hydrogen-bonded organic framework (HOF)-based in situ wavelength-switchable lasing based on the framework-shrinkage effect. A flexible HOF with reversible framework shrinkage was constructed from gain blocks with multiple rotors. The framework shrinkage of the HOF induced the in situ regulation on the conformation and conjugation degree of gain blocks, leading to distinct energy-level structures with blue/green-color gain emissions. Inspired by this, the in situ wavelength-switchable lasing from HOF microcrystals was achieved through reversibly controlling the framework shrinkage via the absorption/desorption of guests. The results offer useful insight into the use of flexible HOFs for exploiting miniaturized lasers with on-demand nanophotonics performance.

Composite SPE Paper Membrane Based on the Functional Superstructure of Metal-Organic Frameworks and Ionic Liquids for Detection of Tetracycline-like Antibiotics

Composite adsorbents based on metal-organic frameworks (MOFs) are excellent candidates for solid-phase extraction (SPE) due to their diverse chemical functionality and multilevel porosity. MOF superstructures based on self-assembly at room temperature (RT) could have less energy consumption and easier manipulation due to the larger complex geometry. The π-π stacking of the benzene ring could not only enhance the interaction toward hydrophobic or plane-structured targets but also be expected to promote the formation of the MOF superstructure. In this work, in the established RT self-assembly synthesis system, several factors were investigated to see how to obtain functional MOF superstructures with a regular geometry, among which the number of benzene rings in the ligand was mainly tested for its impact on self-assembly and adsorption capacity. By means of adsorption experiments and computational fluid dynamics (CFD) simulation, the relationship between structure and activity (SARs) was further explored. Interestingly, the MOF unit with the lowest specific surface area performed the best in adsorption. Then, the selected functional MOF superstructure and ionic liquid were used to produce the composite paper membrane facilely applied in the SPE device. After optimization of the preparation conditions and operation parameters, the established SPE-HPLC-UV method could selectively analyze tetracycline-like antibiotics in the range of 16.6-833.3 ng/g (ppb) in a meat sample. This work provided an RT synthesis method to produce a microsize MOF superstructure, with experimental and theoretical insights into the SARs, which could be expanded in the design of other MOF-based SPE composite membranes toward one group of analogues.

Occurrence, toxicity and adsorptive removal of the chloramphenicol antibiotic in water: a review

Chloramphenicol is a broad-spectrum bacterial antibiotic used against conjunctivitis, meningitis, plague, cholera, and typhoid fever. As a consequence, chloramphenicol ends up polluting the aquatic environment, wastewater treatment plants, and hospital wastewaters, thus disrupting ecosystems and inducing microbial resistance. Here, we review the occurrence, toxicity, and removal of chloramphenicol with emphasis on adsorption techniques. We present the adsorption performance of adsorbents such as biochar, activated carbon, porous carbon, metal-organic framework, composites, zeolites, minerals, molecularly imprinted polymers, and multi-walled carbon nanotubes. The effect of dose, pH, temperature, initial concentration, and contact time is discussed. Adsorption is controlled by π-π interactions, donor-acceptor interactions, hydrogen bonding, and electrostatic interactions. We also discuss isotherms, kinetics, thermodynamic data, selection of eluents, desorption efficiency, and regeneration of adsorbents. Porous carbon-based adsorbents exhibit excellent adsorption capacities of 500-1240 mg g^-1. Most adsorbents can be reused over at least four cycles.

Functionalization of a stable AIE-based hydrogen-bonded organic framework for white light-emitting diodes

Hydrogen-bonded organic frameworks (HOFs) have received tremendous attention in recent years due to the good designability. However, the pure organic nature of HOFs sometimes limits the application development and performance improvement. Functionalizing is an effective strategy to control and modulate material properties, which can achieve properties that cannot be achieved by a pristine material. Herein, a series of HOF-76⊃DSMI were synthesized through functionalizing the stable AIE-based HOF-76 by incorporating a red dye which complements the deficiency of the red component of HOF-76. Then, a single matrix white light-emitting diode (WLED) was fabricated by coating the HOF-76⊃DSMI material on a 460 nm blue LED with CIE chromaticity coordinates of (0.333, 0.329), a correlated colour temperature (CCT) of 5490 K and a colour rendering index (CRI) of 80.

We successfully fabricated a white light-emitting diode by coating functionalized AIE-based HOF-76 material on a 460 nm blue LED chip.

Hexahydric Components Metal Organic Frameworks Constructed by Multiple Ligands and Mixed-Valence Ions

In this work, we report two multi-component MOFs [CH3NH2CH3]2[FeIII2MII10(tz)11(HCO2)12(btc)5/3] (MII10 = FeII10 for 1 and MII10 = FeII2CoII8 for 2) obtained by solvothermal assembling formate, benzene-1,3,5-tricarboxylate (btc) and 1,2,4 triazole...