Affinity probe capillary electrophoresis: analysis of recombinant human growth hormone with a fluorescent labeled antibody fragment

Affinity capillary electrophoresis

The application of affinity capillary electrophoresis (ACE) to the study of molecular interactions is reviewed. ACE appears to be a sensitive, versatile and convenient tool to obtain reliable data on binding constants and stoichiometries of interacting systems using the Hummel-Dreyer method and variants thereof. A powerful feature is the possibility to analyze simultaneously the affinity of a large number of compounds for the same ligand, making it a promising tool for the screening of large combinatorial libraries.

HPCE methods for the identification and quantitation of antibodies, their conjugates and complexes

We review here much of the existing literature that deals with analysis, resolution, characterization, and (at times) quantitation of antibodies in capillary electrophoresis modes. Each major mode of CE shown applicable to antibody analysis is described, along with the major applications of that mode for antibodies. Discussions are presented as to the mechanisms of antibody resolution in CE, interactions of various buffer components with the proteins leading to resolution, and methods of quantitation for antibodies. The literature is critically reviewed with regard to true application of CE for antibody analysis, limitations, information possible, information implied, and which samples have actually been assayed by CE modes. The literature is critically reviewed up to and including 1996, both for the scientific and commercial literature, especially vendor applications and real world applications possible.

Capillary electrophoresis based immunoassays: a critical review

The purpose of this article is to review and evaluate the uses and potentials of capillary electrophoresis (CE) in immunoassay analysis (IA). This review will be divided into four sections. First, a brief summary of the fundamentals, applications and requirements of immunoassays in both research and clinical diagnostics will be given. This section will also cover the rationale behind the current research to combine CE and IA. Also, the specific needs to CE in this field will be addressed. Second, the modes of use of CE in IA will be discussed and typical applications for each will be given. Third, a separate section will be devoted to the investigation of performing immunoassays on micro fabricated devices, an interesting alternative to the conventional capillary-based approach. Finally, a critical assessment of the current status and merits of this technology will be presented.

Capillary isoelectric focusing

Capillary isoelectric focusing (CIEF) provides excellent resolution of proteins with the advantage that separations are carried out in a capillary format with on-tube detection and automated analysis. Recent advances in the technique provide improved resolution, reproducibility and reliability. This review summarizes improvements in sample preparation, capillary selection, and focusing and zone mobilization procedures which have helped CIEF become a more robust analytical method. New applications are reviewed, in particular the use of CIEF in analysis of biopharmaceutical products.

Labeling reactions applicable to chromatography and electrophoresis of minute amounts of proteins

Chromatography and electrophoresis have become extremely valuable and important methods for the separation, purification, detection and analysis of biopolymers and HPLC/HPCE may become the premier, preferable approaches for both qualitative and quantitative analyses of most proteins, especially from recombinant materials. This includes smaller peptides, polypeptides, proteins, antibodies and all types of protein or antibody-conjugates (antibody-enzyme, protein-fluorescent probe, antibody-drug and so forth). This entire Topical Issue of Journal of Chromatography emphasizes the application of chromatography and electrophoresis to protein analysis. This particular review deals with approaches to the selective tagging or labeling of proteins at trace (minute) levels, again using either chromatography or electrophoresis, with the emphasis on modern HPLC/HPCE methods and approaches. We discuss here both pre- and post-column labeling methods and reagents, techniques for realizing selective labeling of proteins or antibodies, applicable approaches to protein preconcentration in both HPLC and HPCE areas and in general, methods for improving (lowering) detection limits for proteins utilizing chemical or physical derivatization and/or preconcentration techniques. There are really two major goals or emphases in that which follows: (1) methods for selective labeling of proteins prior to or after HPLC/HPCE and (2) labeling of proteins at trace levels for improved separation-detection and lowered detection limits. We discuss here a large number of specific references related to both pre- and post-column/capillary derivatizations for proteins, as well as methods for improved detectability in both HPLC and HPCE by, for example, analyte preconcentration on a solid-phase extractor or membrane support, capillary isotachophoresis and other methods. Selective reactions or derivatizations on proteins refers to the ability to tag the protein at specific (e.g. reactive amino sites) in a controlled manner, with the products having the same number of tags all at the very same site or sites. The products are all the same species, having the same number of tags at the same locations on the protein. Selective reactions can also refer to the idea of tagging all of the protein sample at only a single, same site or at all available sites, homogeneously.

Recent advances in chromatographic and electrophoretic methods for the study of drug-protein interactions

Drug-protein binding is an important process in determining the activity and fate of a pharmaceutical agent once it has entered the body. This review examines various chromatographic and electrophoretic methods that have been developed to study such interactions. An overview of each technique is presented along with a discussion of its strengths, weaknesses and potential applications. Formats that are discussed include the use of both soluble and immobilized drugs or proteins, and approaches based on zonal elution, frontal analysis or vacancy peak measurements. Furthermore, examples are provided that illustrate the use of these methods in determining the overall extent of drug-protein binding, in examining the displacement of a drug by other agents and in measuring the equilibrium or rate constants for drug-protein interactions. Examples are also given demonstrating how the same methods, particularly when used in high-performance liquid chromatography or capillary electrophoresis systems, can be employed as rapid screening tools for investigating the binding of different forms of a chiral drug to a protein or the binding of different proteins and peptides to a given pharmaceutical agent.

Capillary electrophoretic immunoassays

Capillary electrophoretic immunoassay (CEIA) has recently emerged as a new analytical technique. CEIA, when combined with sensitive detection methods such as laser induced fluorescence (LIF), offers several advantages over conventional immunoassays. CEIA can perform rapid separations with high mass sensitivity, simultaneously determine multiple analytes and is compatible with automation. The objective of this review is to describe the applications of CE in antibody related studies, focussing especially on recent developments of CEIA technique. The principles for competitive and non-competitive CEIA are described with examples. Several detection methods and various applications are summarized and future developments in CEIA are speculated. CEIA has many potential applications, especially if the throughput is improved by using either multicapillary array or microchips with multiple channels.

Determination of the association constant for slow phosphoserine-anti-phosphoserine interaction kinetics by capillary zone electrophoresis

Capillary zone electrophoresis (CZE) was used to study the interaction of a monoclonal anti-phosphoserine antibody with its antigen. A model system that allows the determination of the real binding constant in a solution based on the change in peak areas at different concentrations of phosphoserine has been used for studying slow monoclonal antibody-antigen interaction kinetics involving low-molecular-weight antigens. CZE was applied in preincubation experiments. The slow interaction kinetics led to band broadening and resulted in far lower efficiency of the separation of complexed antibody from unbound antibody. However, when the run-to-run reproducibility of free phosphoserine was examined, it was found that it can be recovered quantitatively under electrophoresis conditions. On the basis of measurement of peak areas at different phosphoserine concentrations, the association constant was estimated (Ka = 5.21 X 10[5] M[-1]) and shown to be in close agreement with that obtained by equilibrium dialysis (Ka = 4.65 X 10[5] M[-1]). As long as the antigen participating in the interaction can be detected and recovered quantitatively in the CZE system, the method is generally useful for the study of monoclonal antibody-antigen interaction where the kinetics is slow and where the charge/ mass ratio of the unbound antigen differs from that of the complexed molecule.

Immunoassay for thyroxine (T4) in serum using capillary electrophoresis and micromachined devices

As part of our ongoing effort to develop electrophoretic assay technology for clinical diagnostics, we describe a competitive immunoassay for the determination of serum thyroxine (T4) based on electrophoresis and laser induced fluorescence (LIF). Measurements of total T4 are useful for the clinical evaluation of thyroid function. A fluorescein thyroxine conjugate was utilized in conjunction with a polyclonal antibody preparation as assay reagents. Capillary electrophoresis (CE) conditions tolerant of the direct injection of serum without extraction or other sample preparation steps were developed and used for quantitation of total T4 in serum. We have been exploring the use of micromachined devices with arrays of channels for high assay throughput. Our assay protocol was carried in a microchip format. The results illustrate that gains in speed can be additionally achieved, with the electrophoretic separation of free from bound labelled T4 being performed in about 15 s for serum samples.

New approaches in clinical chemistry: on-line analyte concentration and microreaction capillary electrophoresis for the determination of drugs, metabolic intermediates, and biopolymers in biological fluids

The use of capillary electrophoresis (CE) for clinically relevant assays is attractive since it often presents many advantages over contemporary methods. The small-diameter tubing that holds the separation medium has led to the development of multicapillary instruments, and simultaneous sample analysis. Furthermore, CE is compatible with a wide range of detectors, including UV-Vis, fluorescence, laser-induced fluorescence, electrochemistry, mass spectrometry, radiometric, and more recently nuclear magnetic resonance, and laser-induced circular dichroism systems. Selection of an appropriate detector can yield highly specific analyte detection with good mass sensitivity. Another attractive feature of CE is the low consumption of sample and reagents. However, it is paradoxical that this advantage also leads to severe limitation, namely poor concentration sensitivity. Often high analyte concentrations are required in order to have injection of sufficient material for detection. In this regard, a series of devices that are broadly termed 'analyte concentrators' have been developed for analyte preconcentration on-line with the CE capillary. These devices have been used primarily for non-specific analyte preconcentration using packing material of the C18 type. Alternatively, the use of very specific antibody-containing cartridges and enzyme-immobilized microreactors have been demonstrated. In the current report, we review the likely impact of the technology of capillary electrophoresis and the role of the CE analyte concentrator-microreactor on the analysis of biomolecules, present on complex matrices, in a clinical laboratory. Specific examples of the direct analysis of physiologically-derived fluids and microdialysates are presented, and a personal view of the future of CE in the clinical environment is given.

Capillary electrophoresis with laser-induced fluorescence detection for the analysis of free and immune-complexed green fluorescent protein

Naturally fluorescing green fluorescent protein (GFP) was separated by capillary electrophoresis (CE) and detected by laser-induced fluorescence (LIF). Exploiting recombinant technology and the natural fluorescence of GFP presents the capability of preempting the need for fluorescent derivatization. Such an approach would circumvent the obstacles typically associated with covalently labeling and purifying analytes that undergo fluorescent labeling. The unique property of GFP to fluoresce naturally was combined with CE-LIF to compare GFP isoforms prepared recombinantly or in vitro with wild-type GFP isoforms isolated from native jellyfish Aequorea victoria. Second, GFP antisera were reacted with wild-type GFP and the formation of the GFP antigen-antibody complex was monitored. A simple borate buffer, pH 8.5, was ample for resolving the two isoforms of the naturally fluorescent GFP in less than 5 min. The separation of GFP from GFP-Ab was complete in less than 7 min with the individual components detectable at the picogram level. A number of factors influence CE separation and/or LIF detection including sample buffer pH and incorporation of the additive 1,4-diamino butane. Remarkably, conditions that severely impair fluorescence detection of free GFP do not diminish fluorescence detection of the GFP antigen-antibody complex in a similar manner. Thus, the antibody appears to preserve the natural fluorophore of GFP. These data lend credence to the utility of coupling naturally fluorescent GFP to the speed, automation, and reduced sample size benefits of CE-LIF analysis for efficient separation and detection of an immunoreaction. In principle, a fusion protein of antibody with GFP as the label in CE-based immunoassays offers an advantageous alternative to the fluor-labeling process usually required in LIF detection.

Clinical potential of microchip capillary electrophoresis systems

Clinical interest in the use of capillary electrophoresis (CE) has recently been extended to the microchip environment. Clinical analyses demand careful handling of complex samples that are often limited in quantity and in concentration. The integrated sample handling and analysis capabilities of microchip substrates thus seem ideally suited to clinical applications. This review surveys the development of sample handling (injection, mixing, and reaction) and separation elements on-chip. The integration of these elements to create a variety of clinical analyzers has been demonstrated. The application of microchip CE systems to human serum protein analysis, immunoassay, and DNA studies is reviewed, along with various other clinical applications. In addition, the clinical potential of the lab-on-a-chip concept is discussed.

Microscale epitope mapping by affinity capillary electrophoresis-mass spectrometry

Using beta-endorphin as a model system, a new microscale solution-based approach for linear epitope mapping based on affinity capillary electrophoresis-mass spectrometry (ACE-MS) is demonstrated. Tryptic peptides are separated in a neutral coated capillary and monitored by ultraviolet absorbance and electrospray mass spectrometry. Then, following injection of the peptide digest mixture, anti-beta-endorphin antibody is injected. The peptide, which binds to the antibody, is captured and disappears from its migration time. Following this subtraction-screening procedure, the binding of the individually synthesized or isolated immunoreactive peptide is examined by the ACE-MS procedure to confirm that the epitope resides on the peptide. A series of truncated peptides can then be made and the precise epitope determined by ACE-MS. The method utilizes low femtomole amounts of antibody and peptide digest per run and is rapid and easily automatable.

Capillary biomolecular separations

This article summarizes the recent advances in microcolumn separations of biopolymers. Microcolumn liquid chromatography is primarily emphasized for its role as a micropreparative and fractionation tool, whereas high-performance capillary electrophoresis is demonstrated as a highly efficient technique for final analyses. Following a brief discussion of new trends in instrumentation, the recent applications of capillary techniques to proteins, DNA and glycoconjugates are reviewed.

Microchip-based capillary electrophoresis for immunoassays: analysis of monoclonal antibodies and theophylline

A microchip capillary electrophoresis device has been used to separate the reaction products of homogeneous, immunological reactions within approximately 40 s. Determination of monoclonal mouse IgG in mouse ascites fluid, via a direct assay, and the drug theophylline in serum samples, via a competitive assay, was demonstrated on-chip. The mouse anti-bovine serum albumin IgG assay gave a linear calibration curve up to at least 135 micrograms/mL, with +/- 3% precision. The theophylline assay gave a threshold for detection of 1.25 ng/mL in diluted serum. A calibration curve of signal vs undiluted log[theophylline] is linear from 2.5 to 40 micrograms/mL, which includes the therapeutically useful range. Theophylline recoveries in spiked samples were 100%, within an experimental error of +/- 5%. A buffer system consisting of 0.05 M tricine adjusted to pH 8.0, 0.01% (w/v) Tween 20, and approximately 40 mM NaCl was used. This buffer allowed for adequate separation (40,000 plates for theophylline; 1000 plates for theophylline-antibody complex and for human IgG) and gave reproducibility of migration times of 1-1.5% over 4-day periods, indicating minimal problems from adsorption in the uncoated chips.

Measurement of antibody-antigen dissociation constants using fast capillary electrophoresis with laser-induced fluorescence detection

The dissociation constant (Kd) of a monoclonal antibody with fluorescein isothiocyanate (FITC)-labeled insulin and unlabeled insulins from several species were measured using capillary electrophoresis with laser-induced fluorescence detection (CE-LIF). Kd determinations were made by separating free FITC-insulin and its complex with the antibody in equilibrated solutions in 6 s or less. The use of LIF detection allowed quantification of free and bound FITC-insulin in the picomolar range, as is required to measure Kd's below 1 nM. The Kd of FITC-insulin with the antibody was determined to be 0.25 nM by Scatchard analysis. The Kd's of the antibody with unlabeled insulins from several species were obtained by fitting bound over free FITC-insulin as a function of unlabeled insulin concentration data from a series of solutions containing a fixed concentration of FITC-insulin and antibody and variable concentrations of insulin to the expected curve derived from the equilibria and mass balance of the solutions. Kd's for the different insulins were between 0.34 and 0.64 nM.

On-line competitive immunoassay for insulin based on capillary electrophoresis with laser-induced fluorescence detection

An on-line competitive immunoassay for insulin has been developed and applied to monitoring insulin concentration in a flowing stream. In the assay, solutions of fluorescein-labeled insulin (FITC-insulin), monoclonal anti-insulin, and sample containing insulin are pumped into a cross where they begin to mix. The mixture flows through a fused silica reactor capillary to a flow-gated interface. During transfer to the interface, insulin and FITC-insulin compete to form a complex with the antibody. At the interface, a plug of the mixture is injected into a separation capillary, where the bound and free FITC-insulin are separated and detected by capillary electrophoresis with laser-induced fluorescence detection. The amount of bound FITC-insulin, amount of free FITC-insulin, or bound/free ratio can be used to quantify insulin concentration. Typical relative standard deviations of bound over free ratio are 5%. The detection limit of the immunoassay in the on-line mode is < 0.3 nM. Each separation requires as little as 3 s, and over 1600 consecutive assays can be acquired with no need to rinse the separation capillary. Thus, the system can be used to monitor insulin in a flowing stream for flow injection analysis or for sensor-like monitoring. Dilution and zone broadening during transfer of sample to the interface limit the response time of the on-line system to about 25 s. As a demonstration of the on-line immunoassay, the insulin content of single islets of Langerhans was determined by flow injection analysis.

Separation of recombinant human growth hormone from Escherichia coli cell pellet extract by capillary zone electrophoresis

Free zone capillary electrophoresis (FZCE) was used to resolve recombinant human growth hormone (rhGH) and its variants from very crude mixtures of Escherichia coli (E. coli) cell paste extract. The methodology employs a phosphate deactivated fused-silica capillary and a 250 mM phosphate (pH 6.8), 1% (v/v) propylene glycol buffer with a high field strength of 600 V/cm. Resolution of rhGH and its variants from very crude mixtures did not change after 80 injections for the PSC capillaries. Bare silica and PVA coated capillaries had a more limited lifetime when injected with the same crude mixtures (10 to 30 injections). This FZC method provides a very powerful tool for assessing rhGH modification during the fermentation and isolation of rhGH that is not possible with other current analytical techniques.

Design and optimization of a capillary electrophoretic mobility shift assay involving trp repressor-DNA complexes

An investigation of DNA-protein interactions by capillary electrophoresis (CE) with laser fluorometric detection is performed that combines the rapid and minimal sample consumption methods of CE with the selective separation influence of mobility shift assays. An inspection of the well characterized interaction between the trp repressor of Escherichia coli and the trp operator (DNA) is the basis of the assay. The use of fluorescently tagged operator not only lends itself to laser-induced fluorescence detection but also precludes the use of radiolabeled detection. It is demonstrated that composition and pH of the running buffer are critical for maximized efficiency and resolution of operator from the repressor-operator complex. Quantitative studies showed reaction of repressor with operator resulted in the diminishing of free operator signal and the simultaneous creation of the repressor-operator peak that is well resolved from the free operator. Also examined was the ability to perform qualitative studies involving non-specific interactions between the operator and a complex protein sample. It is shown that the specificity of operator for repressor can be used to selectively separate the repressor from a complex sample that includes non-specific proteins.

Capillary isoelectric focusing as a tool in the examination of antibodies, peptides and proteins of pharmaceutical interest

This paper describes the recent history and development of capillary isoelectric focusing (cIEF), as it has evolved over the past 10 years forming a distinct mode of high-performance capillary electrophoresis (HPCE). The theory, equations, fundamentals and basics of cIEF are discussed and described, including modes of focusing and mobilization, coated vs uncoated capillaries, different detection schemes, resolutions possible, peak capacity possible and final commercialized approaches now available. Then, the applications of the technique are emphasized, as applied to smaller peptides, larger proteins and still larger antibodies and antibody-protein complexes. The emphasis has been on the application of capillary electromigration techniques in drug analysis. Throughout, attempts have been made to emphasize the potential applications and uses of cIEF methods, and how these might be successfully utilized in drug analysis and assays for larger biopolymers.

Improvements in a competition assay to detect scrapie prion protein by capillary electrophoresis

Scrapie in sheep and goats is the prototype of transmissible spongiform encephalopathies found in humans and animals. A feature of these diseases is the accumulation of rod-shaped fibrils in the brain that form from an aggregated protein. This protein is a protease-resistant form of a normal host cell protein. When the aggregated protein is denatured in SDS and beta-mercaptoethanol, a monomer form (prion protein) with a molecular mass of 27 kDa is observed. Free zone capillary electrophoresis and peptides labeled with fluorescein were used to detect the prion protein through competition for a labeled peptide in immune complex formation. The separation of the immune complexes from the unbound peptide using 200 mM Tricine (pH 8.0) was faster and was better resolved than that obtained with phosphate or borate buffer systems. The amount of immune complex formation was dependent on the amount of antibody in the assay. The amount of bound labeled peptide and unbound labeled peptide could be measured directly by calculating the area of each respective peak. As increasing amounts of unlabeled peptide were added to the assay, a concentration dependent reduction in the immune complex peak was observed. The assay could detect less than 10.0 fmol of unlabeled peptide. There was a quantitative difference in the competition of preparations from scrapie infected sheep brain and normal sheep brain.

Capillary electrophoresis

Capillary electorphoresis is rapidly maturing as a major technique for the analysis of proteins, nucleic acids, and glycoconjugates. Recently, efforts have concentrated on the application of its two most powerful ancillary techniques, laser-induced fluorescence detection and mass spectrometry. In addition, affinity capillary electrophoresis is rapidly becoming popular in ligand-biomolecule binding studies. The integration of sample treatment with separation on a microchip is yet another interesting development.

Microchip electrophoretic immunoassay for serum cortisol

An immunoassay performed using a microchip electrophoretic system is described. Separation and quantitation of free and bound labeled antigen in a competitive assay are carried out in channels micromachined into fused silica substrates. Such microchips are attractive because of their small size, ruggedness, and amenability to automated handling. The assay achieves the determination of cortisol in blood serum over the range of clinical interest (1-60 micrograms/dL) without the need for extraction or other sample preparation steps. The separation is performed in less than 30 s. Very high throughput is possible by operating the assay in multiple channels in parallel. These characteristics make microchip electrophoretic systems a promising technology for the rapid analysis of clinical samples.

Analysis of protein fractions by micropreparative capillary isoelectric focusing and matrix-assisted laser desorption time-of-flight mass spectrometry

In this study, the use of capillary isoelectric focusing (cIEF) as a micropreparative tool for protein analysis by matrix-assisted laser desorption time-of-flight mass spectrometry (MALDI-TOF-MS) is demonstrated. A newly designed, automated, collection interface equipped with a fiber-optic UV detector and a sheath flow connection was employed for collection of protein fractions. Multiple fractions were collected during a single cIEF run and further analyzed by MALDI-TOF-MS for mass assignment. The feasibility of the method was tested with a mixture of model proteins with different isoelectric points and molecular masses, and with variants of human hemoglobins differing in pI, but with negligible difference in M(r). Some practical considerations of the collection procedure and subsequent TOF analysis are presented.

Feasibility study of a drug immunoassay based on micellar electrokinetic capillary chromatography with laser induced fluorescence detection: determination of theophylline in serum

This paper presents principle and first results of a novel competitive binding immunoassay for monitoring of theophylline in human serum. The assay is based upon short time incubation of a mixture of antiserum, containing the antibody raised against theophylline, fluorescein labelled theophylline (tracer) and serum prior to injection of a few nanoliter of this mixture onto a fused-silica capillary for subsequent separation and analysis of free tracer and the antibody-tracer-complex by micellar electrokinetic capillary chromatography with laser induced fluorescence detection. Quantitation based upon multi-level calibration using the height of the peak produced by the free tracer is shown to provide theophylline serum levels which are in agreement with those obtained by a commercial fluorescence polarization immunoassay and with those determined by micellar elektrokinetic capillary chromatography with direct serum injection and on-column UV absorption detection.

Fluorescence-labeled peptides as isoelectric point (pI) markers in capillary isoelectric focusing with fluorescence detection

Commercially available peptides, mostly angiotensin derivatives, were labeled at their N-terminal amino group with 5-carboxytetramethylrhodamine succinimidyl ester, to obtain fluorescent pI markers for capillary isoelectric focusing with fluorescence detection. The labeled peptides were purified by reversed-phase chromatography. They were well separated on isoelectric focusing in a polyacrylamide gel slab and their pIs were determined by comigration with protein-pI markers. The fluorescent markers could be detected as sharp peaks in capillary isoelectric focusing with laser-induced fluorescence detection (He-Ne laser, 1 mW, 543.5 nm). The detection limit was found to be around 3 x 10(-12) M (0.8 amol). Tetramethylrhodamine-labeled pea lectin (3 pg) was subjected to capillary isoelectric focusing and the pIs of the fluorescent derivatives of the lectin were determined by using the fluorescence-labeled peptides as pI markers.

Analysis of immunoglobulin G using a capillary electrophoretic affinity assay with protein A and laser-induced fluorescence detection

A method for the rapid and sensitive determination of immunoglobulin G (IgG) in cultivation media by an affinity assay using capillary electrophoresis is presented. For that purpose we evaluated protein A conjugated with a fluorescent dye such as fluorescein diisocyanate or dichlorotriazinyl-aminofluorescein as an affinity ligand. The ligand formed a fluorescing complex with immunoglobulin G in the sample and rapid separation from excess protein A was performed by capillary zone electrophoresis. However, only partial resolution of the zones was achieved when protein A as a whole molecule was utilized. In contrast, baseline resolution of the zones was obtained when recombinant fragments of protein A were used as affinity ligands. Immunoglobulin concentrations in the range of two orders of magnitude were determined. Due to the specificity of protein A for immunoglobulin G, analysis can be carried out even in the presence of high concentrations of other components and in cultivation media. Thus, the capillary electrophoretic affinity assay was successfully applied to monitor monoclonal antibodies in a cultivation process.

Monitoring of a conjugation reaction between fluorescein isothiocyanate and myoglobin by capillary zone electrophoresis

The conjugation reaction between the amine reactive fluorescent probe fluorescein isothiocyanate and the protein horse heart myoglobin was directly monitored as the reaction progressed by capillary zone electrophoresis with UV absorbance detection. Kinetic analysis of the data indicated that the order of the reaction was first with respect to myoglobin and 1.3 with respect to fluorescein isothiocyanate. The separation of peaks attributable to the incorporation of n = 1,2, ... 7 fluorochrome labels into the protein has some significance for the generation of single-label protein probes, such as antibodies.

Characterization of digoxigenin-labeled B-phycoerythrin by capillary electrophoresis with laser-induced fluorescence. Application to homogeneous digoxin immunoassay

A laser-induced fluorescence (LIF) immunoassay technique based on capillary electrophoretic (CE) separation is demonstrated. The analysis of digoxin in serum at clinically useful concentration levels of 10(-9) to 10(-10) M is achieved using this technique. The chemistry presented here using digoxigenin-labeled B-phycoerythrin was selected as a convenient model for the exploration of CE-LIF-based immunoassays. The LIF system described here exhibits detection limits in the low 10(-11) M range for several common fluorophores. The data presented in this report are one of the first examples of nanomolar quantitative analysis in a human serum matrix by CE.

Analysis of structural specificity in antibody-antigen reactions by capillary electrophoresis with laser-induced fluorescence detection

A rapid and simple procedure for screening antibodies for binding to an antigen is proposed. A fluorescent hapten-dye conjugate was prepared by labeling the amino moiety of the hapten with a commercially available reactive cyanine dye, Cy5 (excitation maximum: 650 nm, emission maximum: 670 nm). A fixed amount of the Cy5-hapten was titrated with serial dilution of the antibody. Each of the titration mixture was analyzed by capillary electrophoresis (25 cm x 20 microns column) monitored by laser-induced fluorescence (laser: 10 mW helium-neon, 632.8 nm). Free and antibody-bound Cy5-hapten were analyzed simultaneously on the electropherogram. Competitive immunoassay of hapten was demonstrated with low-end sensitivity of 5.10(-8) M, about 10x more sensitive than the present drug screening methods. Using morphine as an example, the screening of various antibodies (from different vendors) and cross-reactivity of morphine analogues using the present procedure will be discussed.