Isolated Single Iron Atoms Anchored on N-Doped Porous Carbon as an Efficient Electrocatalyst for the Oxygen Reduction Reaction

Highly efficient and selective electrocatalytic hydrogen peroxide production on Co-O-C active centers on graphene oxide

Electrochemical oxygen reduction provides an eco-friendly synthetic route to hydrogen peroxide (H2O2), a widely used green chemical. However, the kinetically sluggish and low-selectivity oxygen reduction reaction (ORR) is a key challenge to electrochemical production of H2O2 for practical applications. Herein, we demonstrate that single cobalt atoms anchored on oxygen functionalized graphene oxide form Co-O-C@GO active centres (abbreviated as Co1@GO for simplicity) that act as an efficient and durable electrocatalyst for H2O2 production. This Co1@GO electrocatalyst shows excellent electrochemical performance in O2-saturated 0.1 M KOH, exhibiting high reactivity with an onset potential of 0.91 V and H2O2 production of 1.0 mg cm-2 h-1 while affording high selectivity of 81.4% for H2O2. Our combined experimental observations and theoretical calculations indicate that the high reactivity and selectivity of Co1@GO for H2O2 electrogeneration arises from a synergistic effect between the O-bonded single Co atoms and adjacent oxygen functional groups (C-O bonds) of the GO present in the Co-O-C active centres.

Understanding the active sites of Fe-N-C materials and their properties in the ORR catalysis system

Metal-N-C-based catalysts prepared by pyrolysis are frequently used in the oxygen reduction reaction (ORR). Zeolitic imidazolate frameworks (ZIFs), a type of metal organic framework (MOF), are selected as precursors due to their special structure and proper pore sizes. A series of Fe-N-C catalysts with different concentrations of 2-methylimidazole were prepared with a simple solvothermal-pyrolysis method, and the transformation productivity, morphology and ORR activity were investigated. It was found that the Fe-N-C catalyst with a 2-methylimidazole concentration of 0.53 mol L-1 had the best performance. In 0.1 M KOH solution, the half-wave potential was 0.852 V (vs. RHE), with the highest electrochemically active surface area (ECSA) of 94.1 cm2, and the ORR reaction was dominated by a 4-electron process. The current only decreased by 10.5% after 50 000 s of chronoamperometry (CA), while the half-wave potential only decreased 20 mV in 3 M methanol. Additionally, this catalyst cannot be poisoned by Cl- and SO3 2- ions in the ORR process. Finally, some typical ions including SCN-, Fe(CN)6 3- and Fe(CN)6 4- were used to inhibit the active sites, and it was determined that Fe(ii) is the real active species. The series of synthesis and testing experiments has significance in guiding optimization of the synthesis conditions and analysis of the mechanism of active sites in Fe-N-C materials.

A clicking confinement strategy to fabricate transition metal single-atom sites for bifunctional oxygen electrocatalysis

Rechargeable zinc-air batteries call for high-performance bifunctional oxygen electrocatalysts. Transition metal single-atom catalysts constitute a promising candidate considering their maximum atom efficiency and high intrinsic activity. However, the fabrication of atomically dispersed transition metal sites is highly challenging, creating a need for for new design strategies and synthesis methods. Here, a clicking confinement strategy is proposed to efficiently predisperse transitional metal atoms in a precursor directed by click chemistry and ensure successful construction of abundant single-atom sites. Concretely, cobalt-coordinated porphyrin units are covalently clicked on the substrate for the confinement of the cobalt atoms and affording a Co-N-C electrocatalyst. The Co-N-C electrocatalyst exhibits impressive bifunctional oxygen electrocatalytic performances with an activity indicator ΔE of 0.79 V. This work extends the approach to prepare transition metal single-atom sites for efficient bifunctional oxygen electrocatalysis and inspires the methodology on precise synthesis of catalytic materials.

Ordered carbonaceous frameworks: a new class of carbon materials with molecular-level design

Ordered carbonaceous frameworks (OCFs) are a new class of carbon materials with a three-dimensional ordered structure synthesized by simple carbonization of metalloporphyrin crystals with polymerizable moieties. Carbonization via solid-state polymerization results in the formation of graphene-based ordered frameworks in which regularly aligned single-atomic metals are embedded. These unique structural features afford molecular-level designability like organic-based frameworks together with high electrical conductivity, thermal/chemical stability, and mechanical flexibility, towards a variety of applications including electrocatalysis and force-driven phase transition. This feature article summarizes the synthetic strategies and characteristics of OCFs in comparison with conventional organic-based frameworks and porous carbons, to discuss the potential applications and further development of the OCF family.

Engineering Dual Single-Atom Sites on 2D Ultrathin N-doped Carbon Nanosheets Attaining Ultra-Low-Temperature Zinc-Air Battery

Herein, a novel dual single-atom catalyst comprising adjacent Fe-N₄ and Mn-N₄ sites on 2D ultrathin N-doped carbon nanosheets with porous structure (FeMn-DSAC) was constructed as the cathode for a flexible low-temperature Zn-air battery (ZAB). FeMn-DSAC exhibits remarkable bifunctional activities for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Control experiments and density functional theory calculations reveal that the catalytic activity arises from the cooperative effect of the Fe/Mn dual-sites aiding *OOH dissociation as well as the porous 2D nanosheet structure promoting active sits exposure and mass transfer during the reaction process. The excellent bifunctional activity of FeMn-DSAC enables the ZAB to operate efficiently at ultra-low temperature of -40 °C, delivering 30 mW cm^-2 peak power density and retaining up to 86 % specific capacity from the room temperature counterpart.

Development of an Au-anchored Fe Single-atom nanozyme for biocatalysis and enhanced tumor photothermal therapy

Near-infrared light-induced photothermal therapy (PTT) can achieve effective tumor ablation, but the associated hyperthermic temperatures result in off-target inflammatory damage to proximal tissues. Therefore, killing the tumor at a lower temperature is vital to improving the clinical effect of PTT. In this study, an Au-integrated Fe single-atom nanozyme (FeSAzyme) was developed through the immobilization of an ultrasmall Au nanozyme within a metal-organic framework via an in situ reduction approach. The nanozyme was found to exhibit favorable glucose oxidase- (GOD) like activity and photosensitizing properties to better achieve low-temperature PTT. The Au-carbon nanozyme was able to markedly inhibit tumor growth both in vitro and in vivo due to its GOD-like activity and enhanced photodynamic and photothermal properties. In addition, the integration of the Au nanozyme enhanced the FeSAzyme's peroxidase activity and catalyzed endogenous H₂O₂ species to generate reactive oxide species, thereby facilitating chemodynamic therapy. Furthermore, its integration markedly enhanced the PTT performance of the FeSAzyme, which achieved pronounced synergistic anti-tumor efficacy. The enzymatic activity and photothermal/photosensitive properties of the Au-FeSAzyme may help to overcome traditional therapeutic limitations, indicating its potential for catalytic cascade nanozymes in biomedical applications.

A top-down strategy for amorphization of hydroxyl compounds for electrocatalytic oxygen evolution

Amorphous materials have attracted increasing attention in diverse fields due to their unique properties, yet their controllable fabrications still remain great challenges. Here, we demonstrate a top-down strategy for the fabrications of amorphous oxides through the amorphization of hydroxides. The versatility of this strategy has been validated by the amorphizations of unitary, binary and ternary hydroxides. Detailed characterizations indicate that the amorphization process is realized by the variation of coordination environment during thermal treatment, where the M-OH octahedral structure in hydroxides evolves to M-O tetrahedral structure in amorphous oxides with the disappearance of the M-M coordination. The optimal amorphous oxide (FeCoSn(OH)6-300) exhibits superior oxygen evolution reaction (OER) activity in alkaline media, where the turnover frequency (TOF) value is 39.4 times higher than that of FeCoSn(OH)6. Moreover, the enhanced OER performance and the amorphization process are investigated with density functional theory (DFT) and molecule dynamics (MD) simulations. The reported top-down fabrication strategy for fabricating amorphous oxides, may further promote fundamental research into and practical applications of amorphous materials for catalysis.

Nitrogen-Doped Carbon Polyhedrons Confined Fe-P Nanocrystals as High-Efficiency Bifunctional Catalysts for Aqueous Zn-CO2 Batteries

Emerging Fe bonded with heteroatom P in carbon matrix (FePC) holds great promise for electrochemical catalysis, but the design of highly active and cost-efficient FePC structure for the electrocatalytic CO₂ reduction reaction (CO₂ RR) and aqueous ZnCO₂ batteries (ZCBs) is still challenging. Herein, polyhedron-shaped bifunctional electrocatalysts, FeP nanocrystals anchored in N-doped carbon polyhedrons (Fe-P@NCPs), toward a reversible aqueous ZnCO₂ battery, are reported. The Fe-P@NCPs are synthesized through a facile strategy by using self-templated zeolitic imidazolate frameworks (ZIFs), followed by an in situ high-temperature calcination. The resultant catalysts exhibit aqueous CO₂ RR activity with a CO Faradaic efficiency up to 95% at -0.55 V versus reversible hydrogen electrode (RHE), comparable to the previously best-reported values of FeNC structure. The as-constructed ZCBs with designed Fe-P@NCPs cathode, show the peak power density of 0.85 mW cm^-2 and energy density of 231.8 Wh kg^-1 with a cycling durability over 500 cycles, and outstanding stability in terms of discharge voltage for 7 days. The high selectivity and efficiency of the battery are attributed to the presence of highly catalytic FeP nanocrystals in N-doped carbon matrix, which can effectively increase the number of catalytically active sites and interfacial charge-transfer conductivity, thereby improving the CO₂ RR activity.

A Hydrogen-Free Approach for Activating an Fe Catalyst Using Trace Amounts of Noble Metals and Confinement into Nanoparticles

Metallic iron (Fe) represents an exceptionally active catalyst, as shown in its use in the Haber-Bosch process to dissociate nitrogen molecules; however, the ease of corrosion by oxidation limits its usage. Hence, in most applications using metallic Fe catalysts, hydrogen is a necessary reactant. We report a novel hydrogen-free approach to fabricating reduced, highly active, and corrosion-resistive Fe-based catalysts using trace levels of noble metals (NMs) such as Ir, Rh, and Pt confined in the nanoparticle (NP). X-ray photoelectron spectroscopy (XPS) revealed that as little as ∼0.3 atom % was sufficient to induce the reduction of Fe. Extensive XPS analysis showed that the reduced NM atoms segregated to the NP surface and reduced the surrounding Fe atoms. We demonstrated the catalytic activity of the nanoparticles by the efficient synthesis of submillimeter tall, vertically aligned, and mainly double-walled carbon nanotube arrays using a completely hydrogen-free chemical vapor deposition process.

Single-atom Nanozymes for Biomedical Applications： Recent Advances and Challenges

Nanozymes have received extensive attention in the fields of sensing and detection, medical therapy, industry, and agriculture thanks to the combination of the catalytic properties of natural enzymes and the physicochemical properties of nanomaterials, coupled with superior stability and ease of preparation. Despite the promise of nanozymes, conventional nanozymes are constrained by their oversized size and low catalytic capacity in sophisticated practical application environments. single-atom nanozymes (SAzymes) were characterized as nanozymes with high catalytic efficiency by uniformly distributed single atoms as catalysis sites, thus effectively addressing the defects of conventional nanozymes. This paper reviews the activity improvement scheme and catalytic mechanism of SAzymes and highlights the latest research progress of SAzymes in the fields of biomedical sensing and therapy. Eventually, the challenges and future directions of SAzymes are discussed in this paper.

Confinement synthesis in porous molecule-based materials: a new opportunity for ultrafine nanostructures

A balance between activity and stability is greatly challenging in designing efficient metal nanoparticles (MNPs) for heterogeneous catalysis. Generally, reducing the size of MNPs to the atomic scale can provide high atom utilization, abundant active sites, and special electronic/band structures, for vastly enhancing their catalytic activity. Nevertheless, due to the dramatically increased surface free energy, such ultrafine nanostructures often suffer from severe aggregation and/or structural degradation during synthesis and catalysis, greatly weakening their reactivities, selectivities and stabilities. Porous molecule-based materials (PMMs), mainly including metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and porous organic polymers (POPs) or cages (POCs), exhibit high specific surface areas, high porosity, and tunable molecular confined space, being promising carriers or precursors to construct ultrafine nanostructures. The confinement effects of their nano/sub-nanopores or specific binding sites can not only effectively limit the agglomeration and growth of MNPs during reduction or pyrolysis processes, but also stabilize the resultant ultrafine nanostructures and modulate their electronic structures and stereochemistry in catalysis. In this review, we highlight the latest advancements in the confinement synthesis in PMMs for constructing atomic-scale nanostructures, such as ultrafine MNPs, nanoclusters, and single atoms. Firstly, we illustrated the typical confinement methods for synthesis. Secondly, we discussed different confinement strategies, including PMM-confinement strategy and PMM-confinement pyrolysis strategy, for synthesizing ultrafine nanostructures. Finally, we put forward the challenges and new opportunities for further applications of confinement synthesis in PMMs.

Highly Sensitive Chemiluminescent Immunoassay of Mycotoxins Using ZIF-8-Derived Yolk-Shell Co Single-Atom Site Catalysts as Superior Fenton-like Probes

Superior to traditional nanoscale catalysts, single-atom site catalysts (SASCs) show such merits as maximal catalysis efficiency and outstanding catalytic activity for the construction of analytical methodological platforms. Hereby, an in situ etching strategy was designed to prepare yolk-shell Co SASCs derived from ZIF-8@SiO₂ nanoparticles. On the basis of direct chemical interactions between precursors and supports, the Co element with isolated atomic dispersion was anchored on ZIF-8@SiO₂ nanoparticles. The Co SASCs possess high Fenton-like activity and thus can catalyze the decomposition of H₂O₂ to produce massive superoxide radical anions instead of singlet oxygen and hydroxyl radicals. With the activity for producing superoxide radical anion, Co SASCs can greatly improve the chemiluminescent (CL) response of a luminol system by 3133.7 times. Furthermore, the SASCs with active sites of Co-O₅ moieties were utilized as the CL probes for establishment of an immunoassay method for sensitive detection of mycotoxins by adopting aflatoxin B1 as a mode analyte. The quantitation range is 10-1000 pg/mL, and the limit of detection is 0.44 pg/mL (3σ) for aflatoxin B1. The proof-of-principle work elucidates the practicability of direct chemical interactions between precursors and supports for forming SASCs with ultrahigh CL response, which can be extended to the exploitation of more sorts of SASCs for tracing biological binding events.

Metal-Organic Frameworks Derived Electrocatalysts for Oxygen and Carbon Dioxide Reduction Reaction

The increasing demands of energy and environmental concerns have motivated researchers to cultivate renewable energy resources for replacing conventional fossil fuels. The modern energy conversion and storage devices required high efficient and stable electrocatalysts to fulfil the market demands. In previous years, we are witness for considerable developments of scientific attention in Metal-organic Frameworks (MOFs) and their derived nanomaterials in electrocatalysis. In current review article, we have discussed the progress of optimistic strategies and approaches for the manufacturing of MOF-derived functional materials and their presentation as electrocatalysts for significant energy related reactions. MOFs functioning as a self-sacrificing template bid different benefits for the preparation of metal nanostructures, metal oxides and carbon-abundant materials promoting through the porous structure, organic functionalities, abundance of metal sites and large surface area. Thorough study for the recent advancement in the MOF-derived materials, metal-coordinated N-doped carbons with single-atom active sites are emerging candidates for future commercial applications. However, there are some tasks that should be addressed, to attain improved, appreciative and controlled structural parameters for catalytic and chemical behavior.

In-Situ Silica Xerogel Assisted Facile Synthesis of Fe-N-C Catalysts with Dense Fe-Nx Active Sites for Efficient Oxygen Reduction

In the past decade, atomically dispersed Fe active sites (coordinated with nitrogen) on carbon materials (FeNC) have emerged rapidly as promising single-atom catalysts (SACs) for the oxygen reduction reaction (ORR) to substitute precious group metal (PGM) catalysts, owing to their earth abundance and low cost. Nonetheless, the production of highly active FeNC SACs is largely restricted by material cost, low product yield and difficulty of microstructure design. Herein, the authors demonstrate a facile in-situ xerogel (ISG) assisted synthetic strategy, using cheap materials, to construct FeNC SACs (ISG FeNC). The porous silica xerogel, formed in-situ with the FeNC precursors, encourages the emergence of enormous micropores/mesopores and homogeneous confinement/protection to the precursors during pyrolysis, benefiting to the formation of abundant accessible active sites (27.6 × 10¹⁹ sites g^-1 ). Correspondingly, the ISG FeNC exhibits excellent ORR activity with a half-wave potential (E_1/2  = 0.91 V) in alkaline medium. The Zn-air battery assembled using the ISG FeNC SACs as the bifunctional catalyst of air cathode, demonstrates commendable performance with high peak power density of 249.1 mW cm^-2 and superior long-term stability (660 cycles with 220 h). This work offers an economic and efficient way to fabricate PGM-free SACs for diverse applications.

Atomically Dispersed Iron with Densely Exposed Active Sites as Bifunctional Oxygen Catalysts for Zinc-Air Flow Batteries

Atomically dispersed iron embedded carbon is a promising bifunctional catalyst for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), but its exposed iron sites must be increased. Herein, the authors propose a double steric hindrance strategy by using zeolitic imidazolate frameworks-8 as the first barrier skeleton and encapsulated phenylboronic acid as the second space obstruction to realize densely exposed atomic iron sites. Prepared PA@Z8-FeNC has the highest iron content (5.49 wt%) among reported transition-metal-based single-atom oxygen catalysts. Meanwhile, its concave surfaces, hollow structures, and hierarchical pores enable the high utilization rate of iron sites to 88.5 ± 4.5% and exposed active site density to 5.2 ± 0.3 × 10²⁰ sites g^-1 . Resultantly, PA@Z8-FeNC exhibits superior activity and stability to commercial Pt/C and IrO₂ for the ORR and OER in half-cells and zinc-air flow batteries. This provides insight for developing densely and accessibly active sites in single-atom catalysts.

Self-Adaptive Single-Atom Catalyst Boosting Selective Ferroptosis in Tumor Cells

Ferroptosis, resulting from the catastrophic accumulation of lipid reactive oxygen species (ROS) and the inactivation of glutathione (GSH)-dependent peroxidase 4 (GPX4), has emerged as a form of regulated cell death for cancer therapy. Despite progress made with current ferroptosis inducers, efficient systems to trigger ferroptosis remain challenging, owing largely to their low activity, uncontrollable behavior, and even nonselective interactions. Here, we report a self-adaptive ferroptosis platform by engineering a DNA modulator onto the surface of single-atom nanozymes (SAzymes). The modulator could not only specifically intensify the ROS-generating activity but also endow the SAzymes with on-demand GSH-consuming ability in tumor cells, accelerating selective and safe ferroptosis. The self-adaptive antitumor response has been demonstrated in colon cancer and breast cancer, promoting the development of selective cancer therapy.

Interfacial-confined coordination to single-atom nanotherapeutics

Pursuing and developing effective methodologies to construct highly active catalytic sites to maximize the atomic and energy efficiency by material engineering are attractive. Relative to the tremendous researches of carbon-based single atom systems, the construction of bio-applicable single atom materials is still in its infancy. Herein, we propose a facile and general interfacial-confined coordination strategy to construct high-quality single-atom nanotherapeutic agent with Fe single atoms being anchored on defective carbon dots confined in a biocompatible mesoporous silica nanoreactor. Furthermore, the efficient energy conversion capability of silica-based Fe single atoms system has been demonstrated on the basis of the exogenous physical photo irradiation and endogenous biochemical reactive oxygen species stimulus in the confined mesoporous network. More importantly, the highest photothermal conversion efficiency with the mechanism of increased electron density and narrow bandgap of this single atom structure in defective carbon was proposed by the theoretical DFT calculations. The present methodology provides a scientific paradigm to design and develop versatile single atom nanotherapeutics with adjustable metal components and tune the corresponding reactions for safe and efficient tumor therapeutic strategy.

Developing single atom systems with improved catalytic potential for bio-application has major therapeutic potential. Here, the authors report on the development of a metal single-atom on a carbon dot support confined within mesoporous silica for the development of therapeutic agents.

Identifying the impact of the covalent-bonded carbon matrix to FeN4 sites for acidic oxygen reduction

The atomic configurations of FeN_x moieties are the key to affect the activity of oxygen rection reaction (ORR). However, the traditional synthesis relying on high-temperature pyrolysis towards combining sources of Fe, N, and C often results in the plurality of local environments for the FeN_x sites. Unveiling the effect of carbon matrix adjacent to FeN_x sites towards ORR activity is important but still is a great challenge due to inevitable connection of diverse N as well as random defects. Here, we report a proof-of-concept study on the evaluation of covalent-bonded carbon environment connected to FeN₄ sites on their catalytic activity via pyrolysis-free approach. Basing on the closed π conjugated phthalocyanine-based intrinsic covalent organic polymers (COPs) with well-designed structures, we directly synthesized a series of atomically dispersed Fe-N-C catalysts with various pure carbon environments connected to the same FeN₄ sites. Experiments combined with density functional theory demonstrates that the catalytic activities of these COPs materials appear a volcano plot with the increasement of delocalized π electrons in their carbon matrix. The delocalized π electrons changed anti-bonding d-state energy level of the single FeN₄ moieties, hence tailored the adsorption between active centers and oxygen intermediates and altered the rate-determining step.

Unveiling the effect of carbon matrix adjacent to Fe-N towards oxygen reduction reaction is important yet challenging. Here the authors investigate the carbon environment covalent-connected to FeN₄ sites on their catalytic activity using models prepared by pyrolysis-free approach.

MOF-derived Ru@ZIF-8 catalyst with the extremely low metal Ru loading for selective hydrogenolysis of C–O bonds in lignin model compounds under mild conditions

A MOF-derived Ru@ZIF-8 catalyst with extremely low Ru loading effectively cleaved the C–O bonds of lignin model compounds under mild conditions.

Recycling and valorization of LDPE: direct transformation into highly ordered doped-carbon materials and their application as electro-catalysts for the oxygen reduction reaction

A transformation of LDPE in highly ordered doped-carbon materials by a simple one-step pyrolysis in presence of transition metal precursors is proposed. The graphitization, metal dispersion and CNFs presence are key factors for the high ORR performance.

Single Atom Sites Catalysts based on High Specific Surface Area Supports

Catalysis is the heart of modern chemical industry. Supports with high specific surface area are crucial for the fabrication of efficient catalysts with elevated metal dispersion. Single atom sites catalysts...

The active structure of p-block SnNC single-atom electrocatalysts for the oxygen reduction reaction

The active structure and activity origin of intriguing SnNC single-atom catalysts in the oxygen reduction reaction are rationalized by theoretical simulations.

Recent Advances in Flexible Zn-Air Batteries: Materials for Electrodes and Electrolytes

Flexible Zn-air batteries (ZABs) draw much attention due to the merits of high energy density, stability, and safety, and show potential applications for wearable devices. However, the development of flexible ZABs with great energy density, high round-trip efficiency, and long cycle life for practical applications is highly restricted by the lack of highly active oxygen catalysts, high ion-conducting solid-state electrolytes, appropriate Zn anodes, and advanced battery configuration. Promising oxygen catalysts should possess both, superior oxygen reduction reaction and oxygen evolution reaction performance and can be directly used as self-supporting cathodes without loading catalysts on support materials such as carbon cloth. In addition, electrolytes play an important role in ZABs; a good electrolyte should be in all-solid state with high ion conductivity. Moreover, for an excellent Zn anode, it is required to stably contact the electrolyte interface during the bending process. Therefore, in this review, recent advances in ZABs are summarized, including: i) the powder and 3D self-supporting oxygen catalysts, ii) the species of solid-state electrolytes, and iii) the rational design of Zn anodes. Finally, the challenges and opportunities of this promising field are presented.

Boosting the catalytic performance of single-atom catalysts by tuning surface lattice expanding confinement

We report that Pt single atoms embedded on a disordered TiO2 surface have a weaker affinity for CO than those supported on a perfect TiO2 surface, thus generating much better CO oxidation activity.

Single atom catalysis for electrocatalytic ammonia synthesis

This review points out major challenges and outlook of NH3 synthesis via SACs. Summarizing the deficiencies of existing research can help researchers to continuously innovate and improve, and explore new research approaches.

Clusters Induced Electron Redistribution to Tune Oxygen Reduction Activity of Transition Metal Single-Atom for Metal-Air Batteries

Oxygen reduction reaction (ORR) activity can be effectively tuned by modulating the electron configuration and optimizing the chemical bonds. Herein, a general strategy to optimize the activity of metal single-atom is achieved by the decoration of metal clusters via a coating-pyrolysis-etching route. In this unique structure, the metal clusters are able to induce electron redistribution and modulate M-N species bond lengths. As a result, the M-ACSA@NC exhibits superior ORR activity compared with the nanoparticles-decorated counterparts. The performance enhancement is attributed to the optimized intermediates desorption benefiting from the unique electronic configuration. Theoretical analysis reinforces the significant roles of metal clusters by correlating the ORR activity with clusters induced charge transfer. As a proof-of-concept, various metal-air batteries assembled with the Fe-ACSA@NC deliver remarkable power densities and capacities. This strategy is an effective and universal technique for electron modulation of M-N-C, which shows great potential in application of energy storage devices.

Tumor Microenvironment Responsive Single-Atom Nanozymes for Enhanced Antitumor Therapy

Single-atom nanozymes (SAzymes) with specific response to the unique tumor microenvironment (TME) feature providing 100% metal atoms utilization for high-efficient enzyme-catalyzed therapy and accurate template for the study of therapeutic mechanisms. In this review, we first introduce the various synthetic strategies of SAzymes, and the TME-responsive SAzymes activities. Next, the TME-responsive enhanced antitumor therapeutic approaches based on the enzymatic activities of SAzymes are summarized, and the corresponding therapy mechanisms are elaborated. Subsequently, a concise but concentrated summary, and the challenges and opportunities for the future design and engineering of SAzyme are outlined. As a newly-built discipline, SAzymes have vast space for development in enhanced antitumor therapy. This timely review provides guidance and constructive suggestions for the future of SAzymes.

Dual enzyme-mimic nanozyme based on single-atom construction strategy for photothermal-augmented nanocatalytic therapy in the second near-infrared biowindow

Nanozyme-based catalytic therapy, an emerging therapeutic pattern, has significantly incorporated in the advancement of tumor therapy by generating lethal reactive oxygen species. Nevertheless, most of the nanozymes have mono catalytic performances with H₂O₂ in the tumor microenvironment (TME), which lowers their therapeutic efficiency. Herein, we design a newly-developed single-atom Fe dispersed N-doped mesoporous carbon nanospheres (SAFe-NMCNs) nanozyme with high H₂O₂ affinity for photothermal-augmented nanocatalytic therapy. The SAFe-NMCNs nanozyme possesses dual enzyme-mimic catalytic activity which not only acts as a catalase-mimic role to achieve ultrasonic imaging in tumor site by O₂ generation, but also exhibits the superior peroxidase-mimic catalytic performance to generate •OH for nanocatalytic therapy. Besides, the SAFe-NMCNs nanozyme with strong optical absorption in the second near-infrared (NIR-II) region shows excellent photothermal conversion performance. The peroxidase-mimic catalytic process of SAFe-NMCNs nanozyme is realized using density functional theory (DFT). Both in vitro and in vivo results indicate that the SAFe-NMCNs nanozyme can efficiently suppress tumor cells growth by a synergistic therapy effect with photothermal-augmented nanocatalytic therapy. The work developed a single-atom-coordinated nanozyme with dual-enzyme catalytic performance and achieve hyperthermia-augmented nanocatalytic therapy effect, can open a window for potential biological applications.

Active site engineering of single-atom carbonaceous electrocatalysts for the oxygen reduction reaction

The electrocatalytic oxygen reduction reaction (ORR) is the vital process at the cathode of next-generation electrochemical storage and conversion technologies, such as metal-air batteries and fuel cells. Single-metal-atom and nitrogen co-doped carbonaceous electrocatalysts (M-N-C) have emerged as attractive alternatives to noble-metal platinum for catalyzing the kinetically sluggish ORR due to their high electrical conductivity, large surface area, and structural tunability at the atomic level, however, their application is limited by the low intrinsic activity of the metal-nitrogen coordination sites (M-N x ) and inferior site density. In this Perspective, we summarize the recent progress and milestones relating to the active site engineering of single atom carbonous electrocatalysts for enhancing the ORR activity. Particular emphasis is placed on the emerging strategies for regulating the electronic structure of the single metal site and populating the site density. In addition, challenges and perspectives are provided regarding the future development of single atom carbonous electrocatalysts for the ORR and their utilization in practical use.

Ionothermal-Transformation Strategy to Synthesize Hierarchically Tubular Porous Single-Iron-Atom Catalysts for High-Performance Zinc-Air Batteries

Inexpensive carbon-based nitrogen-coordinated iron single-atom catalysts (CN-FeSACs) have been recently demonstrated as the most promising platinum substitutions for boosting the sluggish oxygen electrode performance in fuel cells and metal-air batteries. However, it is still a great challenge to develop economical and effective CN-FeSACs satisfying the needs of high output power. Herein, an ionothermal-transformation strategy is proposed to synthesize hierarchically tubular porous CN-FeSACs with an ultrahigh special surface area of 2500 m² g^-1 to host abundant single-atom iron sites with an attempt to simultaneously boost sluggish oxygen reduction reaction (ORR) kinetics and mass transport. Benefiting from the unique feature, the final obtained material shows an ORR half-wave potential of 0.885 V, higher than that of benchmark Pt/C (0.850 V). When assembled into zinc-air battery, a large peak power density of 208 mW cm^-2 is achieved, which is far superior to that of Pt/C (119 mW cm^-2). This work provides an economical and feasible strategy to prepare hierarchically porous CN-FeSACs for energy conversion.