In Situ Growth of Surfactant-Free Gold Nanoparticles on Nitrogen-Doped Graphene Quantum Dots for Electrochemical Detection of Hydrogen Peroxide in Biological Environments

Energy transfer-based biodetection using optical nanomaterials

This review focuses on recent progress in the development of FRET probes and the applications of FRET-based sensing systems.

Novel synthesis of a Cu2O–graphene nanoplatelet composite through a two-step electrodeposition method for selective detection of hydrogen peroxide

Optimized electrodeposition technique for the synthesis of Cu₂O–graphene composite for H₂O₂sensing.

A label-free electrochemical immunosensor based on the novel signal amplification system of AuPdCu ternary nanoparticles functionalized polymer nanospheres

A sensitive label-free electrochemical immunosensor was designed using a novel signal amplification system for quantitative detecting hepatitis B surface antigen (HBsAg). Nitrogen-doped graphene quantum dots (N-GQDs) supported surfactant-free AuPdCu ternary nanoparticles (AuPdCu/N-GQDs), which featured with good conductivity and excellent catalytic properties for the reduction of hydrogen peroxide (H₂O₂), was synthesized by a simple and benign hydrothermal procedure. At the same time, the electroactive polymer nanospheres (PS) was synthesized by infinite coordination polymers of ferrocenedicarboxylic acid, which could play as carrier and electronic mediator to load AuPdCu/N-GQDs. The PS not only improved the ability to load antibodies because of the good biocompatibility, but also accelerated electron transport of the electrode interface attribute to plentiful ferrocene unit. Thus, the prepared AuPdCu/N-GQDs@PS has abilities of good biocompatibility, catalytic activity and electrical conductivity to be applied as transducing materials to amplify electrochemical signal in detection of HBsAg. Under optimal conditions, the fabricated immunosensor exhibited high sensitivity and stability in the detection of HBsAg. A linear relationship between current signals and the concentrations of HBsAg was obtained in the range from 10fg/mL to 50ng/mL and the detection limit of HBsAg was 3.3fg/mL (signal-to-noise ratio of 3). Moreover, the designed immunosensor with excellent selectivity, reproducibility and stability shows excellent performance in detection of human serum samples. Furthermore, this label-free electrochemical immunosensor has promising application in clinical diagnosis of HBsAg.

In Situ Electrochemical Sensing and Real-Time Monitoring Live Cells Based on Freestanding Nanohybrid Paper Electrode Assembled from 3D Functionalized Graphene Framework

In this work, we develop a new type of freestanding nanohybrid paper electrode assembled from 3D ionic liquid (IL) functionalized graphene framework (GF) decorated by gold nanoflowers (AuNFs), and explore its practical application in in situ electrochemical sensing of live breast cell samples by real-time tracking biomarker H₂O₂ released from cells. The AuNFs modified IL functionalized GF (AuNFs/IL-GF) was synthesized via a facile and efficient dopamine-assisted one-pot self-assembly strategy. The as-obtained nanohybrid assembly exhibits a typical 3D hierarchical porous structure, where the highly active electrocatalyst AuNFs are well dispersed on IL-GF scaffold. And the graft of hydrophilic IL molecules (i.e., 1-butyl-3-methylimidazolium tetrafluoroborate, BMIMBF₄) on graphene nanosheets not only avoids their agglomeration and disorder stacking during the self-assembly but also endows the integrated IL-GF monolithic material with unique hydrophilic properties, which enables it to be readily dispersed in aqueous solution and processed into freestanding paperlike material. Because of the unique structural properties and the combinational advantages of different components in the AuNFs/IL-GF composite, the resultant nanohybrid paper electrode exhibits good nonenzymatic electrochemical sensing performance toward H₂O₂. When used in real-time tracking H₂O₂ secreted from different breast cells attached to the paper electrode without or with radiotherapy treatment, the proposed electrochemical sensor based on freestanding AuNFs/IL-GF paper electrode can distinguish the normal breast cell HBL-100 from the cancer breast cells MDA-MB-231 and MCF-7 cells, and assess the radiotherapy effects to different breast cancer cells, which opens a new horizon in real-time monitoring cancer cells by electrochemical sensing platform.

Nitrogen-Rich Polyacrylonitrile-Based Graphitic Carbons for Hydrogen Peroxide Sensing

Catalytic substrate, which is devoid of expensive noble metals and enzymes for hydrogen peroxide (H₂O₂), reduction reactions can be obtained via nitrogen doping of graphite. Here, we report a facile fabrication method for obtaining such nitrogen doped graphitized carbon using polyacrylonitrile (PAN) mats and its use in H₂O₂ sensing. A high degree of graphitization was obtained with a mechanical treatment of the PAN fibers embedded with carbon nanotubes (CNT) prior to the pyrolysis step. The electrochemical testing showed a limit of detection (LOD) 0.609 µM and sensitivity of 2.54 µA cm^-2 mM^-1. The promising sensing performance of the developed carbon electrodes can be attributed to the presence of high content of pyridinic and graphitic nitrogens in the pyrolytic carbons, as confirmed by X-ray photoelectron spectroscopy. The reported results suggest that, despite their simple fabrication, the hydrogen peroxide sensors developed from pyrolytic carbon nanofibers are comparable with their sophisticated nitrogen-doped graphene counterparts.

Nitrogen doped nanographene structures; study on the adsorption of nucleobases, nucleotides, and their triphosphate derivatives using mixed docking, MD, and QM/MM approaches

The interactions of the nucleobases, nucleotides, and their triphosphate derivatives in both neutral and anionic forms with the nitrogen doped graphenes (NG) were studied using docking and molecular dynamic simulation methods. In docking studies, based on binding energy results, the anionic species and nucleobases were showing the most and the least tendency toward the surface of the NG, respectively. The molecular mechanic/Poisson-Boltzmann surface area results revealed similar results, except for the anionic species; in these studies, the anionic species showed a lesser affinity toward the NG. The time-dependent density functional theory studies were carried out to investigate the effects of the NG on the electronic nature of the investigated ligands; a red-shift in all of the cases was observed. The results of binding energy decomposition and atoms in molecules studies showed that the interactions are van der Waals in nature. The graphitic, pyridinic, and pyrrolic nitrogen atoms which were considered in this study behaved similar to each other.

One-Pot Synthesis of Carbon Nanodots in an Organic Medium with Aggregation-Induced Emission Enhancement (AIEE): A Rationale for "Enzyme-Free" Detection of Cholesterol

Addressing the limitations associated with the detection of cholesterol, we present a one-pot synthesis of a carbon nanodot (CD) in an organic medium (CD_org) from a novel bile acid hydrazone-based organogel. Interestingly, CD_org possesses the aggregation-induced emission enhancement (AIEE) phenomenon, which rationally aids in the "enzyme-free" detection of cholesterol through a fluorescence turn-on mechanism. On dilution of the THF/water mixture of CD_org with its poor solvent (water), a 9.8-fold enhancement in its photoluminescence (PL) emission is witnessed. Such an enhancement in PL emission is credited to the occurrence of molecular restrictions due to the formation of nanoaggregates of CD_org, thereby initiating a radiative pathway for exciton decay. Excitingly on adding cholesterol to CD_org, we observed a similar enhancement in its PL emission without the use of any cholesterol oxidase (ChO _x ) enzyme. The limit of detection and limit of quantification of cholesterol is found to be as low as 1.09 and 3.64 μM, respectively. Hence, this contribution highlights the enzyme-free fluorescence turn-on detection of cholesterol by a novel CD rationally designed to extend its applicability in an organic medium, where it is still considered a major restraint.

Sustained and Cost Effective Silver Substrate for Surface Enhanced Raman Spectroscopy Based Biosensing

While surface enhanced Raman spectroscopy (SERS) based biosensing has demonstrated great potential for point-of-care diagnostics in the laboratory, its application in the field is limited by the short life time of commonly used silver based SERS active substrates. In this work, we report our attempt towards SERS based field biosensing, involving the development of a novel sustained and cost-effective substrate composed of silver nanoparticles protected by small nitrogen-doped Graphene Quantum Dots, i.e. Ag NP@N-GQD, and its systematic evaluation for glucose sensing. The new substrate demonstrated significantly stronger Raman enhancement compared to pure silver nanoparticles. More importantly, the new substrate preserved SERS performance in a normal indoor environment for at least 30 days in both the wet and dry states, in contrast to only 10 days for pure silver nanoparticles. The Ag NP@N-GQD thin film in the dry state was then successfully applied as a SERS substrate for glucose detection in mouse blood samples. The new substrate was synthesized under mild experimental conditions, and the cost increase due to N-GQD was negligible. These results suggest that the Ag NP@N-GQD is a cost-effective and sustained SERS substrate, the development of which represents an important step towards SERS based field biosensing.

Graphene- gold based nanocomposites applications in cancer diseases; Efficient detection and therapeutic tools

Early detection and efficient treatment of cancer disease remains a drastic challenge in 21st century. Throughout the bulk of funds, studies, and current therapeutics, cancer seems to aggressively advance with drug resistance strains and recurrence rates. Nevertheless, nanotechnologies have indeed given hope to be the next generation for oncology applications. According to US National cancer institute, it is anticipated to revolutionize the perspectives of cancer diagnosis and therapy. With such success, nano-hybrid strategy creates a marvelous preference. Herein, graphene-gold based composites are being increasingly studied in the field of oncology, for their outstanding performance as robust vehicle of therapeutic agents, built-in optical diagnostic features, and functionality as theranostic system. Additional modes of treatments are also applicable including photothermal, photodynamic, as well as combined therapy. This review aims to demonstrate the various cancer-related applications of graphene-gold based hybrids in terms of detection and therapy, highlighting the major attributes that led to designate such system as a promising ally in the war against cancer.

Gas assisted method synthesis nitrogen-doped carbon quantum dots and Hg (II) sensing

Nitrogen-doped fluorescent carbon quantum dots (CQDs) was prepared by gas-assisted method using cellulose as precursors under ammonia atmosphere, which not only exhibited excellent photoluminescent properties, but also showed highly selective and sensitive detection of mercury ion. The nitrogen-doped CQDs displayed excitation wavelength dependent fluorescent behavior with outstanding dispersibility. Moreover, they exhibited high tolerance to various external conditions, such as storage time, pH value, and ionic strength. The rapid detection of Hg (II) by one-step operation within 1 min and the good linear correlation between I₀/I and Hg (II) concentration in the range of 10-100 nM made the nitrogen-doped CQDs a promising nanoprobe for Hg (II) detection. The detection limit of the nitrogen-doped CQDs is about 7.7 nM. Such a nanoprobe has been successfully applied for the analysis of Hg (II) in natural water samples, demonstrating excellent practical feasibility.

Technical synthesis and biomedical applications of graphene quantum dots

Graphene quantum dots (GQDs) have generated enormous excitement because of their superiority in chemical inertness, biocompatibility and low toxicity. Due to quantum confinement and edge effects, GQDs have excellent properties, attracting extensive attention from scientists in the fields of chemistry, physics, materials science, biology, and other interdisciplinary sciences. In this review, we aim to present a comprehensive view on the synthesis of GQDs for biological applications. We highlight potential methods like acid oxidation, hydrothermal and solvothermal reactions, microwave-assisted methods, electrochemical oxidation, as well as pyrolysis and carbonization for the successful preparation of GQDs. Meanwhile, four representative types of biomedical application based on GQDs, bioimaging, biosensing, drug delivery, and antimicrobial materials, are introduced and discussed in detail. This work will be very useful for quickly gaining knowledge and experience for synthesizing various GQDs, and developing advanced strategies for creating novel functional GQD-based nanomaterials for further applications in biomedicine, materials science, analytical science, and optical nanodevices.

Red Emission B, N, S-co-Doped Carbon Dots for Colorimetric and Fluorescent Dual Mode Detection of Fe3+ Ions in Complex Biological Fluids and Living Cells

Colorimetric and fluorescent dual mode detection methods have gained much attention in recent years; however, it is still desirable to develop new colorimetric and fluorescent dual mode nanosensors with more simple preparation procedures, low cost, and excellent biocompatibility. Herein, a colorimetric and fluorescent nanosensor based on B, N, S-co-doped carbon dots (BNS-CDs) was synthesized by one-step hydrothermal treatment of 2,5-diaminobenzenesulfonic acid and 4-aminophenylboronic acid hydrochloride. Using this nanosensor, a highly sensitive assay of Fe³⁺ in the range of 0.3-546 μM with a detection limit of 90 nM was provided by quenching the red emission fluorescence. It is more attractive that Fe³⁺ can also be visualized by this nanosensor via evident color changes of the solution (from red to blue) under sunlight without the aid of an ultraviolet (UV) lamp. Furthermore, the designed nanosensor can be applied for efficient detection of intracellular Fe³⁺ with excellent biocompatibility and cellular imaging capability, and it holds great promise in biomedical applications.

Boosted Sensor Performance by Surface Modification of Bifunctional rht-Type Metal-Organic Framework with Nanosized Electrochemically Reduced Graphene Oxide

The surface and interface could be designed to enhance properties of electrocatalysts, and they are regarded as the key characteristics. This report describes surface modification of a bifunctional rht-type metal-organic framework (MOF, Cu-TDPAT) with nanosized electrochemically reduced graphene oxide (n-ERGO). The hybrid strategy results in a Cu-TDPAT-n-ERGO sensor with sensitive and selective response toward hydrogen peroxide (H₂O₂). Compared with Cu-TDPAT, Cu-TDPAT-n-ERGO exhibits significantly enhanced electrocatalytic activities, highlighting the importance of n-ERGO in boosting their electrocatalytic activity. The sensor shows a wide linear detection range (4-12 000 μM), and the detection limit is 0.17 μM (S/N = 3) which is even lower than horseradish peroxidase or recently published noble metal nanomaterial based biosensors. Moreover, the sensor displays decent stability, excellent anti-interference performance, and applicability in human serum and urine samples. Such good sensing performance can be explained by the synergetic effect of bifunctional Cu-TDPAT (open metal sites and Lewis basic sites) and n-ERGO (excellent conductive property). It is expected that rht-type MOF-based composites can provide wider application potential for the construction of bioelectronics devices, biofuel cells, and biosensors.

A Highly Sensitive Non-Enzymatic Sensor Based on a Cu/MnO2/g-C3N4-Modified Glassy Carbon Electrode for the Analysis of Hydrogen Peroxide Residues in Food Samples

A simple and highly sensitive method for the determination of hydrogen peroxide was developed by electrodepositing Cu and MnO2 onto a g-C3N4 coated glassy carbon electrode in a one-step procedure. The morphology of the fabricated electrode material was characterized by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The electrochemical properties were measured using cyclic voltammetry (CV) and chronoamperometry. The modified sensor exhibits high catalytic activity towards electrochemical oxidation of hydrogen peroxide in a neutral phosphate buffer solution. Within the concentration ranges of 0.01–20 mM and 20–400 mM, the fabricated sensor shows a good linear relationship with the oxidation peak current, the detection limit is 0.85 × 10−6 M. Furthermore, the sensor exhibits high selectivity, good stability, and reproducibility. We successfully applied the sensor to detect hydrogen peroxide residues in food samples with satisfactory results, providing a new approach for food security evaluation.

NiCo2S4/tryptophan-functionalized graphene quantum dot nanohybrids for high-performance supercapacitors

This paper reports a facile synthesis of NiCo₂S₄via a one-step hydrothermal reaction and its hybrid with tryptophan-functionalized graphene quantum dots. The nanohybrid electrode exhibits significantly enhanced electrochemical performance for supercapacitors.

Bulbous gold–carbon nanodot hybrid nanoclusters for cancer therapy

Carbon nanodots are used to stabilize gold-nanoclusters. Charge-transfer interactions between carbon nanodots and gold were detected by transient absorption spectroscopy.

Highly fluorescent N,S-co-doped carbon dots: synthesis and multiple applications

N and S co-doped carbon dots (N,S-CDs) synthesized from biomass can be used as multicolor probes for cell imaging. The N,S-CDs can selectively and sensitively detect Cr(vi) in real lake water, human serum and living cells.

Green preparation of nitrogen doped carbon quantum dot films as fluorescent probes

A facile and economical hydrothermal method was developed for the preparation of highly luminescent NCDs by using cabbage juice as carbon source and PP as nitrogen source. The fluorescence intensity of CA-NCDs was quenched by Fe³⁺ with high sensitivity and selectivity.