Surface Organometallic and Coordination Chemistry toward Single-Site Heterogeneous Catalysts: Strategies, Methods, Structures, and Activities

Ultrahigh Photocatalytic Rate at a Single-Metal-Atom-Oxide

Metal oxides, as one of the mostly abundant and widely utilized materials, are extensively investigated and applied in environmental remediation and protection, and in energy conversion and storage. Most of these diverse applications are the result of a large diversity of the electronic states of metal oxides. Noticeably, however, many metal oxides present obstacles for applications in catalysis, mainly due to the lack of efficient active sites with desired electronic states. Here, the fabrication of single-tungsten-atom-oxide (STAO) is demonstrated, in which the metal oxide's volume reaches its minimum as a unit cell. The catalytic mechanism in the STAO is determined by a new single-site physics mechanism, named as quasi-atom physics. The photogenerated electron transfer process is enabled by an electron in the spin-up channel excited from the highest occupied molecular orbital to the lowest unoccupied molecular orbital +1 state, which can only occur in STAO with W⁵⁺ . STAO results in a record-high and stable sunlight photocatalytic degradation rate of 0.24 s^-1 , which exceeds the rates of available photocatalysts by two orders of magnitude. The fabrication of STAO and its unique quasi-atom photocatalytic mechanism lays new ground for achieving novel physical and chemical properties using single-metal-atom oxides (SMAO).

Well-Defined Silica-Supported Tungsten(IV)-Oxo Complex: Olefin Metathesis Activity, Initiation, and Role of Brønsted Acid Sites

Despite the importance of the heterogeneous tungsten-oxo-based olefin metathesis catalyst (WO₃/SiO₂) in industry, understanding of its initiation mechanism is still very limited. It has been proposed that reduced W(IV)-oxo surface species act as precatalysts. In order to understand the reactivity and initiation mechanism of surface W(IV)-oxo species, we synthesized a well-defined silica-supported W(IV)-oxo species, (≡SiO)WO(OtBuF₆)(py)₃ (F6@SiO_2-700; OtBuF₆ = OC(CH₃)(CF₃)₂; py = pyridine), via surface organometallic chemistry (SOMC). F6@SiO_2-700 was shown to be highly active in olefin metathesis upon removal of pyridine ligands through the addition of tris(pentafluorophenyl)borane (B(C₆F₅)₃) or thermal treatment under high vacuum. The metathesis activity toward olefins with and without allylic C-H groups, namely β-methylstyrene and styrene, respectively, was investigated. In the case of styrene, we demonstrated the role of surface OH groups in initiating metathesis activity. We proposed that the presence of strong Brønsted acidic OH sites, which likely arises from the presence of adjacent W sites in the catalyst as revealed by ¹⁵N-labeled pyridine adsorption, can assist styrene metathesis. In contrast, initiation of olefins with allylic C-H groups (e.g., β-methylstyrene) is independent of the surface OH density and likely involves an allylic C-H activation mechanism, like the molecular W(IV)-oxo species. This study indicates that initiation mechanisms depend on the olefinic substrates and reveals the synergistic effect of Brønsted acidic surface sites and reduced W(IV) sites in the initiation of olefin metathesis.

The Comparison between Single Atom Catalysis and Surface Organometallic Catalysis

Single atom catalysis (SAC) is a recent discipline of heterogeneous catalysis for which a single atom on a surface is able to carry out various catalytic reactions. A kind of revolution in heterogeneous catalysis by metals for which it was assumed that specific sites or defects of a nanoparticle were necessary to activate substrates in catalytic reactions. In another extreme of the spectrum, surface organometallic chemistry (SOMC), and, by extension, surface organometallic catalysis (SOMCat), have demonstrated that single atoms on a surface, but this time with specific ligands, could lead to a more predictive approach in heterogeneous catalysis. The predictive character of SOMCat was just the result of intuitive mechanisms derived from the elementary steps of molecular chemistry. This review article will compare the aspects of single atom catalysis and surface organometallic catalysis by considering several specific catalytic reactions, some of which exist for both fields, whereas others might see mutual overlap in the future. After a definition of both domains, a detailed approach of the methods, mostly modeling and spectroscopy, will be followed by a detailed analysis of catalytic reactions: hydrogenation, dehydrogenation, hydrogenolysis, oxidative dehydrogenation, alkane and cycloalkane metathesis, methane activation, metathetic oxidation, CO₂ activation to cyclic carbonates, imine metathesis, and selective catalytic reduction (SCR) reactions. A prospective resulting from present knowledge is showing the emergence of a new discipline from the overlap between the two areas.

SBA-15 as a Support for Effective Olefin Metathesis Catalysts

Olefin metathesis is the catalytic transformation of olefinic substrates, finding a wide range of applications in organic synthesis. The mesoporous molecular sieve Santa Barbara Amorphous (SBA-15) has proven to be an excellent support for metathesis catalysts thanks to its regular mesoporous structure, high BET area, and large pore volume. A survey of catalysts consisting of (i) molybdenum and tungsten oxides on SBA-15, and (ii) molybdenum and ruthenium organometallic complexes (Schrock and Grubbs-type carbenes) on SBA-15 is provided together with their characterization and catalytic performance in various metathesis reactions. The comparison with catalysts based on other supports demonstrates the high quality of the mesoporous molecular sieve SBA-15 as an advanced catalyst support.

Silica-Supported Molybdenum Oxo Alkylidenes: Bridging the Gap between Internal and Terminal Olefin Metathesis

Grafting a molybdenum oxo alkylidene on silica (partially dehydroxylated at 700 °C) affords the first example of a well-defined silica-supported Mo oxo alkylidene, which is an analogue of the putative active sites in heterogeneous Mo-based metathesis catalysts. In contrast to its tungsten analogue, which shows poor activity towards terminal olefins because of the formation of a stable off-cycle metallacyclobutane intermediate, the Mo catalyst shows high metathesis activity for both terminal and internal olefins that is consistent with the lower stability of Mo metallacyclobutane intermediates. This Mo oxo metathesis catalyst also outperforms its corresponding neutral silica-supported Mo and W imido analogues.

A silica-supported titanium catalyst for heterogeneous hydroamination and multicomponent coupling reactions

Highly dehydrated silica gel, SiO₂⁷⁰⁰, gave a material with a total surface hydroxyl density of 0.31 ± 0.05 mmol g^-1, 0.9 ± 0.1 Si-OH sites per nm². Treatment of this material with Ti(NMe₂)₄ gave Ti(NMe₂)₃/SiO₂⁷⁰⁰, which is 1.50% ± 0.07 Ti, where the titanium is bound to the surface, on average, through a single O-Si-Ti linkage. This material was tested for its properties as a catalyst for C-N bond forming reactions and was found to be a competent alkyne hydroamination and iminoamination catalyst. For iminoamination, which is the 3-component coupling of an alkyne, primary amine, and isonitrile, this heterogeneous catalyst was able to carry out some catalyses faster than previously reported homogeneous catalysts with lower catalyst loadings. The material is also a catalyst for the addition of aniline to dicyclohexylcarbodiimide to form a substituted guanidine. In addition, a known quinoline with biological activity was prepared using the heterogeneous catalyst in a one-pot procedure using half the catalyst loading of the previously reported synthesis.

Homochiral BINAPDA-Zr-MOF for Heterogeneous Asymmetric Cyanosilylation of Aldehydes

A new homochiral BINAPDA-Zr-MOF was prepared by a new chiral organic linker of (R)-4,4'-(6,6'-dichloro-2,2'-diethoxyl-[1,1'-binaphthalene]-4,4'-diyl)dibenzoic acid (R-L) and ZrCl₄ under solvothermal conditions. Its structure was determined by Pawley refinement on the basis of the measured PXRD pattern determined for BINAPDA-Zr-MOF, and it showed that the obtained chiral MOF crystallized in the F2₃ space group with the same topological structure as that of UiO-66. The obtained BINAPDA-Zr-MOF can be a very active catalyst to catalyze aldehyde cyanosilylation. In addition, the chiral BINAPDA-Zr-MOF was a typical solid catalyst, which was proved by a hot leaching test; moreover, it could be reused at least five times without loss of its catalytic activity and enantioselectivity.

Single-Sites and Nanoparticles at Tailored Interfaces Prepared via Surface Organometallic Chemistry from Thermolytic Molecular Precursors

Heterogeneous catalysts are complex by nature, making particularly difficult to assess the structure of their active sites. Such complexity is inherited in part from their mode of preparation, which typically involves coprecipitation or impregnation of metal salts in aqueous solution, and the associated complex surface chemistries. In this context, surface organometallic chemistry (SOMC) has emerged as a powerful approach to generate well-defined surface species, where the metal sites are introduced by grafting tailored molecular precursors. When combined with thermolytic molecular precursors (TMPs) that can lose their organic moieties quite readily upon thermal treatment, SOMC provides access to supported isolated metal sites with defined oxidation state and nuclearity inherited from the precursor. The resulting surface species bear unusual coordination imposed by the surface that provides them high reactivity in comparison with their molecular precursor. In addition, these molecularly defined species bare strong resemblance with the active sites of supported metal oxides. However, they typically contain a higher proportion of active sites making structure-activity relationship possible. They thus constitute ideal models for this important class of industrial catalysts that are used in numerous applications such as olefin epoxidation (Shell process), olefin metathesis (triolefin process), ethylene polymerization (Phillips catalysts), or propane dehydrogenation (Catofin and related processes). This SOMC/TMP approach can thus provide detailed information about the structure of active sites in industrial catalysts, their mode of initiation and deactivation, as well as the role of the support and specific thermal treatment on the final activity of the catalysts. Nonetheless, these structurally characterized surface sites still exhibit heterogeneous environments borrowed from the support itself, that explain the intrinsic complexity of heterogeneous catalysis. Furthermore, SOMC/TMP can also be used to generate and investigate supported metal nanoparticles. Starting from the well-defined isolated sites, that also contain adjacent surface OH groups, one can graft a second metal and then generate after treatment under hydrogen small and narrowly dispersed alloys or nanoparticles with tailored interfaces that can show improved catalytic performances and are amiable to detailed structure-activity relationships. This approach is illustrated by two case studies: (1) formation of supported copper nanoparticles at tailored interfaces that contain isolated metal sites for the selective hydrogenation of carbon dioxide to methanol, allowing for a detailed understanding of the role of dopants and supports in heterogeneous catalysis, and (2) preparation of highly selective and productive propane dehydrogenation catalysts based on silica-supported Pt _xGa _y alloy. Overall, this Account shows how the combination of SOMC and TMP helps to generate catalysts, particularly suited for elucidating structural characterization of active sites at a molecular-level which in turn enables structure-activity relationship to be drawn. Such detailed information obtained on well-defined catalysts can then be used to understand complex effects observed in industrial catalysts (effects of supports, additives, dopants, etc.), and to extract information that can then be used to improve them in a more rational way.

Jahn-Teller Distorted Effects To Promote Nitrogen Reduction over Keggin-Type Phosphotungstic Acid Catalysts: Insight from Density Functional Theory Calculations

Molecular geometry, electronic structure, and possible reaction mechanism of a series of mono-transition-metal-substituted Keggin-type polyoxometalate (POM)-dinitrogen complexes [PW₁₁O₃₉M(N₂)] ^n- (M = Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, Tc, Ru, Rh, Pd, Ag, Cd, W, Re, Os, Ir, Pt, Au, and Hg) have been investigated by using density functional theory (DFT) calculations with M06L functional. The calculated adsorption energy of N₂ molecule, N-N bond length, N-N stretching frequency, and the NBO charge on the coordinated N₂ moiety indicate that Mo^II-, Tc^II-, W^II-, Re^II-, and Os^II-POM complexes are significant for binding and activation of the inert N₂ molecule. The degree of the N₂ activation can be classified into the "moderately activated" category according to Tuczek's sense [ J. Comput. Chem. 2006 , 27 , 1278 ]. Electronic structure and NBO analysis indicate that the terminal N atom of the coordinated N₂ molecule in these POM-dinitrogen complexes possesses more negative charge relative to the bridge N atom because Jahn-Teller distorted effects lead to an effective orbital mixture between σ_2s* orbital of N₂ and d _z² orbital of transition metal center. And the mono-lacunary Keggin-type POM ligand with five oxygen donor atoms serves as a strong electron donor to the bivalent metal center. Meanwhile, a catalytic cycle for direct conversion of N₂ into NH₃ has been systematically investigated based on a Re-POM complex along distal, alternating, and enzymatic pathways. The calculated free energy profile of the three catalytic cycles indicates that the distal mechanism is the favorable pathway in the presence of proton and electron donors.

Grafting of a new bis-silylamido aluminum species on silica: insight from solid-state NMR into interactions with the surface

The new bisamido aluminum species [AlCl{N(SiMe3)2}2(THF)] (1) was prepared and fully characterized by 27Al and 35Cl solid-state NMR, along with X-ray diffraction studies. 1 was grafted on silica partially dehydroxylated at 700 °C, affording silica-supported Al species. The resulting material (2) was characterized by IR, elemental analysis and 1H, 13C and 27Al solid-state MAS NMR. The 1D and 2D 27Al MAS NMR studies showed the occurrence of two types of species, where the Al center adopts a tetracoordinated coordination sphere, with as an additional coordinated Lewis base, either a THF ligand or a silica-surface siloxane moiety. DFT calculations allowed understanding the grafting mechanism and the spectroscopic properties of the material.

Single-Atom Catalysis toward Efficient CO2 Conversion to CO and Formate Products

Simply yet powerfully, single-atom catalysts (SACs) with atomically dispersed metal active centers on supports have received a growing interest in a wide range of catalytic reactions. As a specific example, SACs have exhibited distinctive performances in CO₂ chemical conversions. The unique structures of SACs are appealing for adsorptive activation of CO₂ molecules, transfer of intermediates from support to active metal sites, and production of desirable products in CO₂ conversion. In this Account, we have exemplified our recent endeavors in the development of SACs toward CO₂ conversions in thermal catalysis and electrocatalysis. In terms of the support not only stabilizing but also working collaboratively with the single active sites, the proper choice of support is of great importance for its stability, activity, and selectivity in single-atom catalysis. Three distinctive strategies for SAC architectures-lattice-matched oxide supported, heteroatom-doped carbon anchored, and mimetic ligand chelated-are intensively discussed from the perspective of support design for SACs in different reaction environments. To achieve a high-temperature thermal reduction of CO₂ to CO, TiO₂ (rutile), lattice-matched to the IrO₂ active site, was chosen as a support to realize the thermal stability of Ir₁/TiO₂ SAC, and it shows great capability toward CO₂ conversion and excellent selectivity to CO due to the effective block of the over-reduction of CO₂ to methane over single Ir active sites. In the electrochemical reduction of CO₂ at low temperature, sulfur co-doped N-graphene was developed to achieve unique d⁹-Ni single atoms on the conductive graphene support, by which not only were the atomic Ni active sites trapped into the matrix of graphene for its stabilization, but also the modulation of electronic configuration of mononuclear Ni centers promoted the CO₂ activation through facile electron transfer with an improved electroreduction activity. Inspired by the Ir mononuclear homogeneous catalysts in CO₂ hydrogenation to formate, porous organic polymers (POPs) functionalized with a reticular aminopyridine group were purposely fabricated to mimic the homogeneous ligand environment for chelating the Ir single-atom active center, and this quasi-homogeneous Ir₁/POP catalyst manifests high efficiency for hydrogenation of CO₂ to formate under mild conditions in the liquid phase. Such SACs are of paramount importance for the transformation of CO₂, with their coordination environment helping in the activation of CO₂. Since the energy barrier for the dissociation of the second C-O bond of CO₂ on single-atom sites is very high, these catalysts can give high selectivities toward CO or formate products. Thanks to SACs, the conversion of CO₂ has become much easier in various chemical environments.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Hydrogen Activation by Silica-Supported Metal Ion Catalysts: Catalytic Properties of Metals and Performance of DFT Functionals

Single-site heterogeneous catalysts (SSHC) have received increasing attention due to their well-defined active sites and potentially high specific activity. Detailed computational studies were carried out on a set of potential SSHC's, i.e., silica-supported metal ions, to investigate the reactivity of these catalysts with H₂ as well as to evaluate the performance of density functional theory (DFT) methods in conjunction with triple-ζ quality basis sets (i.e., cc-pVTZ) on reaction energetics. The ions considered include 4d and 5d metals as well as several post-transition metal ions. A representative cluster model of silica is used to calculate reaction free energies of the metal hydride formation that results from the heterolytic cleavage of H₂ on the M-O bond. The hydride formation free energy is previously shown to be strongly correlated with the catalytic activity of such catalysts for alkene hydrogenation. ONIOM calculations (CCSD(T)//MP2) are used to assess the accuracy and reliability of the MP2 results and it is found that MP2 is a suitable level of theory for gauging the performance of DFT functionals. The performance of various DFT functionals is assessed relative to MP2 results and it is found that the wB97xd and PBE0 functionals have the lowest standard deviation (STD) value while the MN12SX and PBE functionals have the lowest mean absolute deviation (MAD) values. The B3LYP functional is shown to have similar MAD and STD values as the top performing functionals. Potential active SSHC's for exergonic hydrogen activation predicted in this study include mostly late and post transition metal ions, i.e., Au³⁺, Pd²⁺, Pt⁴⁺, Pd⁴⁺, Ir⁴⁺, Hg²⁺, Rh³⁺, Pb⁴⁺, Tl³⁺, In³⁺, Ir³⁺, Os⁴⁺, Cd²⁺, Ru²⁺, and Ga³⁺. This study provides important guidance to future computational studies of such catalyst systems.

Selective oxidation of thioanisole by titanium complexes immobilized on mesoporous silica nanoparticles: elucidating the environment of titanium(iv) species

The coordination environment of titanium of the catalysts was investigated by DRUV–vis, Raman and ^47/49Ti MAS-NMR spectroscopies and solid-state electrochemical techniques.

CO oxidation over the polyoxometalate-supported single-atom catalysts M1/POM (Fe, Co, Mn, Ru, Rh, Os, Ir, and Pt; POM = [PW12O40]3–): a computational study on the activation of surface oxygen species

Density functional theory calculations have been carried out to explore the catalytic performance of a series of the M₁/POM (M = Fe, Co, Mn, Ru, Rh, Os, Ir, and Pt; POM = [PW₁₂O₄₀]³⁻) single-atom catalysts for CO oxidation.

The effects of active site and support on hydrogen elimination over transition-metal-functionalized yttria-decorated metal–organic frameworks

Transition-metal catalysts supported on a metal–organic framework have been screened computationally to reveal the best catalytic candidates for hydrogen elimination reactions, which are critical in many catalytic cycles.