Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications

Degradable polymer prodrugs with adjustable activity from drug-initiated radical ring-opening copolymerization

Degradable polymer prodrugs based on gemcitabine (Gem) as an anticancer drug were synthesized by 'drug-initiated' nitroxide-mediated radical ring-opening copolymerization (NMrROP) of methacrylic esters and 2-methylene-4-phenyl-1,3-dioxolane (MPDL). Different structural parameters were varied to determine the best biological performances: the nature of the monomer [i.e., oligo(ethylene glycol) methacrylate (OEGMA) or methyl methacrylate (MMA)], the nature of the Gem-polymer linker (i.e., amide or amide and diglycolate) and the MPDL content in the copolymer. Depending on the nature of the methacrylate monomer, two small libraries of water-soluble copolymer prodrugs and nanoparticles were obtained (M n ∼10 000 g mol-1, Đ = 1.1-1.5), which exhibited tunable hydrolytic degradation under accelerated conditions governed by the MPDL content. Drug-release profiles in human serum and in vitro anticancer activity on different cell lines enabled preliminary structure-activity relationships to be established. The cytotoxicity was independently governed by: (i) the MPDL content - the lower the MPDL content, the greater the cytotoxicity; (ii) the nature of the linker - the presence of a labile diglycolate linker enabled a greater Gem release compared to a simple amide bond and (iii) the hydrophilicity of the methacrylate monomer-OEGMA enabled a greater anticancer activity to be obtained compared to MMA-based polymer prodrugs. Remarkably, the optimal structural parameters enabled reaching the cytotoxic activity of the parent (free) drug.

A Perspective on Reversibility in Controlled Polymerization Systems: Recent Progress and New Opportunities

The field of controlled polymerization is growing and evolving at unprecedented rates, facilitating polymer scientists to engineer the structure and property of polymer materials for a variety of applications. However, the lack of degradability, particularly in vinyl polymers, is a general concern not only for environmental sustainability, but also for biomedical applications. In recent years, there has been a significant effort to develop reversible polymerization approaches in those well-established controlled polymerization systems. Reversible polymerization typically involves two steps, including (i) forward polymerization, which converts small monomers into macromolecule; and (ii) depolymerization, which is capable of regenerating original monomers. Furthermore, recycled monomers can be repolymerized into new polymers. In this perspective, we highlight recent developments of reversible polymerization in those controlled polymerization systems and offer insight into the promise and utility of reversible polymerization systems. More importantly, the current challenges and future directions to solve those problems are discussed. We hope this perspective can serve as an "initiator" to promote continuing innovations in this fairly new area.

Molecular bionics - engineering biomaterials at the molecular level using biological principles

Life and biological units are the result of the supramolecular arrangement of many different types of molecules, all of them combined with exquisite precision to achieve specific functions. Taking inspiration from the design principles of nature allows engineering more efficient and compatible biomaterials. Indeed, bionic (from bion-, unit of life and -ic, like) materials have gained increasing attention in the last decades due to their ability to mimic some of the characteristics of nature systems, such as dynamism, selectivity, or signalling. However, there are still many challenges when it comes to their interaction with the human body, which hinder their further clinical development. Here we review some of the recent progress in the field of molecular bionics with the final aim of providing with design rules to ensure their stability in biological media as well as to engineer novel functionalities which enable navigating the human body.

Zinc and Magnesium Complexes Bearing Oxazoline-Derived Ligands and Their Application for Ring Opening Polymerization of Cyclic Esters

A family of different substituents aza(oxazoline) ligand-based zinc and magnesium complexes were synthesized. These complexes can catalyze ring opening polymerization of ε-caprolactone (ε-CL) and lactide (LA) to produce poly-ε-caprolactone and polylactide with good conversions. Polymerization studies showed that the zinc complexes 1a-4a had moderate activity toward LA and ε-CL polymerization. In situ IR spectroscopy research of zinc complexes showed that the N-donor group-substituted complexes had higher activity than that of the O-ether donor group. The substituted analogies and the flexibility of the amino backbone had a distinct influence on the activity of LA and ε-CL polymerization. The alternates of zinc with magnesium produced complexes 5a-8a, which achieved an obviously increased polymerization activity. Among these magnesium complexes, 7a showed the highest activity in the polymerization of LA. At [M]/[cat] = 1000, the reaction progress was stabilized in 5 min with up to 97% conversion of a monomer at ambient temperature.

Polymerization of ε-Caprolactone Using Bis(phenoxy)-amine Aluminum Complex: Deactivation by Lactide

Polymerizations of biodegradable lactide and lactones have been the subjects of intense research during the past decade. They can be polymerized/copolymerized effectively by several catalyst systems. With bis(phenolate)-amine aluminum complex, we have shown for the first time that lactide monomer can deactivate the aluminum complex during the ongoing polymerization of ε-caprolactone to a complete stop. After hours of dormant state, the aluminum complex can be reactivated again by heating at 100 °C without the addition of any external chemicals still giving polymer with narrow dispersity. Studies using NMR, in situ FTIR, and single-crystal X-ray crystallography indicated that the coordination of the carbonyl group in lactyl unit was responsible for the unusual behavior of lactide. In addition, the unusual methyl-migration from methyl lactate ligand to the amine side chain of the aluminum complex was observed through intermolecular nucleophilic-attack mechanism.

Molecular Level Structure of Biodegradable Poly(Delta-Valerolactone) Obtained in the Presence of Boric Acid

In this study, low molecular weight poly(δ-valerolactone) (PVL) was synthesized through bulk-ring openings polymerization of δ-valerolactone with boric acid (B(OH)₃) as a catalyst and benzyl alcohol (BnOH) as an initiator. The resulting homopolymer was characterized with the aid of nuclear magnetic resonance (NMR) and mass spectrometry (MS) techniques to gain further understanding of its molecular structure. The electrospray ionization mass spectrometry (ESI-MS) spectra of poly(δ-valerolactone) showed the presence of two types of homopolyester chains-one terminated by benzyl ester and hydroxyl end groups and one with carboxyl and hydroxyl end groups. Additionally, a small amount of cyclic PVL oligomers was identified. To confirm the structure of PVL oligomers obtained, fragmentation of sodium adducts of individual polyester molecules terminated by various end groups was explored in ESI-MSⁿ by using collision induced dissociation (CID) techniques. The ESI-MSⁿ analyses were conducted both in positive- and negative ion mode. The comparison of the fragmentation spectra obtained with proposed respective theoretical fragmentation pathways allowed the structure of the obtained oligomers to be established at the molecular level. Additionally, using matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS), it was proven that regardless of the degree of oligomerization, the resulting PVL samples were a mixture of two types of linear PVL oligomers differing in end groups and containing just a small amount of cyclic oligomers that tended to be not visible at higher molar masses.

Comparison of Candida antarctica Lipase B Variants for Conversion of ε-Caprolactone in Aqueous Medium-Part 2

Enzyme-catalyzed ring-opening polymerization of lactones is a method of increasing interest for the synthesis of polyesters. In the present work, we investigated which changes in the structure of Candida antarctica lipase B (CaLB) shift the catalytic equilibrium between esterification and hydrolysis towards polymerization. Therefore, we present two concepts: (i) removing the glycosylation of CaLB to increase the surface hydrophobicity; and (ii) introducing a hydrophobic lid adapted from Pseudomonas cepacia lipase (PsCL) to enhance the interaction of a growing polymer chain to the elongated lid helix. The deglycosylated CaLB (CaLB-degl) was successfully generated by site-saturation mutagenesis of asparagine 74. Furthermore, computational modeling showed that the introduction of a lid helix at position Ala148 was structurally feasible and the geometry of the active site remained intact. Via overlap extension PCR the lid was successfully inserted, and the variant was produced in large scale in Pichia pastoris with glycosylation (CaLB-lid) and without (CaLB-degl-lid). While the lid variants show a minor positive effect on the polymerization activity, CaLB-degl showed a clearly reduced hydrolytic and enhanced polymerization activity. Immobilization in a hydrophobic polyglycidol-based microgel intensified this effect such that a higher polymerization activity was achieved, compared to the "gold standard" Novozym® 435.

Biocatalytic Routes to Lactone Monomers for Polymer Production

Monoterpenoids offer potential as biocatalytically derived monomer feedstocks for high-performance renewable polymers. We describe a biocatalytic route to lactone monomers menthide and dihydrocarvide employing Baeyer-Villiger monooxygenases (BVMOs) from Pseudomonas sp. HI-70 (CPDMO) and Rhodococcus sp. Phi1 (CHMOPhi1) as an alternative to organic synthesis. The regioselectivity of dihydrocarvide isomer formation was controlled by site-directed mutagenesis of three key active site residues in CHMOPhi1. A combination of crystal structure determination, molecular dynamics simulations, and mechanistic modeling using density functional theory on a range of models provides insight into the origins of the discrimination of the wild type and a variant CHMOPhi1 for producing different regioisomers of the lactone product. Ring-opening polymerizations of the resultant lactones using mild metal-organic catalysts demonstrate their utility in polymer production. This semisynthetic approach utilizing a biocatalytic step, non-petroleum feedstocks, and mild polymerization catalysts allows access to known and also to previously unreported and potentially novel lactone monomers and polymers.

Biocompatible Nanobioglass Reinforced Poly(ε-Caprolactone) Composites Synthesized via In Situ Ring Opening Polymerization

Poly(ε-caprolactone) (PCL) is a bioresorbable synthetic polyester widely studied as a biomaterial for tissue engineering and controlled release applications, but its low bioactivity and weak mechanical performance limits its applications. In this work, nanosized bioglasses with two different compositions (SiO₂–CaO and SiO₂–CaO–P₂O₅) were synthesized with a hydrothermal method, and each one was used as filler in the preparation of PCL nanocomposites via the in situ ring opening polymerization of ε-caprolactone. The effect of the addition of 0.5, 1 and 2.5 wt % of the nanofillers on the molecular weight, structural, mechanical and thermal properties of the polymer nanocomposites, as well as on their enzymatic hydrolysis rate, bioactivity and biocompatibility was systematically investigated. All nanocomposites exhibited higher molecular weight values in comparison with neat PCL, and mechanical properties were enhanced for the 0.5 and 1 wt % filler content, which was attributed to extensive interactions between the filler and the matrix, proving the superiority of in situ polymerization over solution mixing and melt compounding. Both bioglasses accelerated the enzymatic degradation of PCL and induced bioactivity, since apatite was formed on the surface of the nanocomposites after soaking in simulated body fluid. Finally, all samples were biocompatible as Wharton jelly-derived mesenchymal stem cells (WJ-MSCs) attached and proliferated on their surfaces.

Self-Assembly of Triblock Copolymers from Cyclic Esters as a Tool for Tuning Their Particle Morphology

This paper presents the effect of end groups, chain structure, and stereocomplexation on the microparticle and nanoparticle morphology and thermal properties of the supramolecular triblock copolyesters. Therefore, the series of the triblock copolymers composed of l,l- and d,d-lactide, trimethylene carbonate (TMC), and ε-caprolactone (CL) with isopropyl ( iPr) or 2-ureido-4-[1 H]-pyrimidinone (UPy) end groups at both chain ends were synthesized. In addition, these copolymers were intermoleculary stereocomplexed by polylactide (PLA) blocks with an opposite configuration of repeating units to promote their self-assembly in various organic solvents. The combination of two noncovalent interactions of the end groups and PLA enantiomeric chains leads to stronger interactions between macromolecules and allows for alteration of their segmental mobility. The simple tuning of the copolymer microstructure and functionality induced the self-assembly of macromolecules at liquid/liquid interfaces, which consequently leads to their phase separation in the form of particles with diameters ranging from 0.1 μm to 10 μm. This control is essential for their potential applications in the biomedical field, where biocompatible and well-defined microparticles and nanoparticles are highly desirable.

Human Rett-derived neuronal progenitor cells in 3D graphene scaffold as an in vitro platform to study the effect of electrical stimulation on neuronal differentiation

Studies of electrical stimulation therapies for the treatment of neurological disorders, such as deep brain stimulation, have almost exclusively been performed using animal-models. However, because animal-models can only approximate human brain disorders, these studies should be supplemented with an in vitro human cell-culture based model to substantiate the results of animal-based studies and further investigate therapeutic benefit in humans. This study presents a novel approach to analyze the effect of electrical stimulation on the neurogenesis of patient-induced pluripotent stem cell (iPSC) derived neural progenitor cell (NPC) lines, in vitro using a 3D graphene scaffold system. The iPSC-derived hNPCs used to demonstrate the system were collected from patients with Rett syndrome, a debilitating neurodevelopmental disorder. The graphene scaffold readily supported both the wild-type and Rett NPCs. Electrical stimulation parameters were optimized to accommodate both wild-type and Rett cells. Increased cell maturation and improvements in cell morphology of the Rett cells was observed after electrical stimulation. The results of the pilot study of electrical stimulation to enhance Rett NPCs neurogenesis were promising and support further investigation of the therapy. Overall, this system provides a valuable tool to study electrical stimulation as a potential therapy for neurological disorders using patient-specific cells.

Precision Aliphatic Polyesters via Segmer Assembly Polymerization

Precise structure-property relation of a biodegradable polymer (e.g., aliphatic polyester) is anticipated only if monomer units and chiral centers are arranged in a defined primary sequence as a biomacromolecule. An emerging synthetic methodology, namely segmer assembly polymerization (SAP), is introduced in this paper to reveal the latest progress in polyester synthesis. Almost any periodic polyester envisioned can be synthesized via SAP using a programed linear or cyclic monomer. In this context, the macroscopic properties of a biodegradable polymer are fundamentally determined by microstructural information through a bottom-up approach. It can be highlighted that SAP ideally combines the precision of organic synthesis and the high efficiency of a polymerization reaction. Previously reported strategies including nucleophilic displacement, polyesterification, cross-metathesis polymerization (CMP), ring-opening polymerization (ROP), ring-opening metathesis polymerization (ROMP) and entropy-driven ring-opening metathesis polymerization (ED-ROMP) are critically reviewed in this paper to shed light on precision synthesis of aliphatic polyesters via SAP. Emerging yet challenging, SAP is a paradigm which reflects the convergence of organic and polymer chemistries and is also an efficient pathway to microstructural control. The current status, future challenges and promising trends in this realm are analyzed and discussed in this overview of the state-of-the-art.

An efficient strategy for achieving controlled ring-opening polymerization of O-carboxyanhydrides via amine initiation in collaboration with metal-alkoxide catalysis

Amines and Zn(C₆F₅)₂ for polymerization initiation and functionality transfer from Zn(C₆F₅)₂ to a metal-alkoxide species for promoting chain propagation to achieve well controlled ring-opening polymerization of O-carboxyanhydrides.

Enzymatic Ring-Opening Polymerization (ROP) of Polylactones: Roles of Non-Aqueous Solvents

Aliphatic polyesters such as polylactides (PLAs) and other polylactones are thermoplastic, renewable and biocompatible polymers with high potentials to replace petro-chemical-based synthetic polymers. A benign route for synthesizing these polyesters is through the enzyme-catalyzed ring-opening polymerization (ROP) reaction; this type of enzymatic process is very sensitive to reaction conditions such as solvents, water content and temperature. This review systematically discusses the crucial roles of different solvents (such as solvent-free or in bulk, organic solvents, supercritical fluids, ionic liquids, and aqueous biphasic systems) on the degree of polymerization and polydispersity. In general, many studies suggest that hydrophobic organic solvents with minimum water contents lead to efficient enzymatic polymerization and subsequently high molecular weights of polyesters; the selection of solvents is also limited by the reaction temperature, e.g. the ROP of lactide is often conducted at above 100 °C, therefore, the solvent typically needs to have its boiling point above this temperature. The use of supercritical fluids could be limited by its scaling-up potential, while ionic liquids have exhibited many advantages include their low-volatility, high thermal stability, controllable enzyme-compatibility, and a wide range of choices. However, the fundamental and mechanistic understanding of the specific roles of ionic liquids in enzymatic ROP reactions is still lacking. Furthermore, the lipase specificity towards l- and d-lactide is also surveyed, followed by the discussion of engineered lipases with improved enantioselectivity and thermal stability. In addition, the preparation of polyester-derived materials such as polyester-grafted cellulose by the enzymatic ROP method is briefly reviewed.

Copolymerization of cyclic esters, epoxides and anhydrides: evidence of the dual role of the monomers in the reaction mixture

A block copolyester derived from ROCOP of CHO/SA followed by ROP of ε-CL was obtained from the mixture of monomers. The lactone comonomer acts as an endogen cocatalyst during the SA/CHO ROCOP step and as a monomer during ROP.

Salen, salan and salalen iron(iii) complexes as catalysts for CO2/epoxide reactions and ROP of cyclic esters

Salan, salen and salalen iron complexes as catalysts in CO₂/epoxide reactions and in the ROP of ε-caprolactone and l-lactide.

Functionalizing PLGA and PLGA Derivatives for Drug Delivery and Tissue Regeneration Applications

Poly(lactic-co-glycolic) acid (PLGA) is one of the most versatile biomedical polymers, already approved by regulatory authorities to be used in human research and clinics. Due to its valuable characteristics, PLGA can be tailored to acquire desirable features for control bioactive payload or scaffold matrix. Moreover, its chemical modification with other polymers or bioconjugation with molecules may render PLGA with functional properties that make it the Holy Grail among the synthetic polymers to be applied in the biomedical field. In this review, the physical-chemical properties of PLGA, its synthesis, degradation, and conjugation with other polymers or molecules are revised in detail, as well as its applications in drug delivery and regeneration fields. A particular focus is given to successful examples of products already on the market or at the late stages of trials, reinforcing the potential of this polymer in the biomedical field.

Catalytic metal-based systems for controlled statistical copolymerisation of lactide with a lactone

A comprehensive survey of the recent developments of metal-based catalysts for the ROcoP of lactide with another lactone is presented.

Photoinduced ring-opening polymerisation of l-lactide via a photocaged superbase

The phototriggered ring-opening polymerisation of l-lactide is demonstrated for the first time using a photocaged tetramethylguanidine.

Rare-earth metal-mediated PhCN insertion into N,N-bis(trimethylsilyl)naphthalene-1,8-diamido dianion – a synthetic approach to complexes coordinated by ansa-bridged amido-amidinato ligand

We report the first example of rare earth metal-mediated insertion of PhCN into Si–N bonds with the formation of an amidinato moiety.

Strategies to combine ROP with ATRP or RAFT polymerization for the synthesis of biodegradable polymeric nanoparticles for biomedical applications

The available strategies to combine CRPs and ROP in the synthesis of highly engineered polymer nanoparticles are here critically discussed.

Dinuclear zirconium complex bearing a 1,5-bridged-calix[8]arene ligand as an effective catalyst for the synthesis of macrolactones

“Macrocyclization of Cycles with a Macrocycle.” The intramolecular cooperation of metal centres in a novel dinuclear complex has been postulated as responsible for the observed high rate of formation of macrocyclic polyesters.

Living ring-opening polymerization of ε-caprolactone catalyzed by β-quinolyl-enamino aluminium complexes: ligand electronic effects

Seven aluminium β-quinolyl-enaminates with varying substituents have been synthesized and applied to the ROP of ε-CL. A comparative study on catalytic activities and reaction kinetics was conducted.