Effects of static or dynamic mechanical stresses on osteoblast phenotype expression in three-dimensional contractile collagen gels

Extracellular Matrix Expression and Production in Fibroblast-Collagen Gels: Towards an In Vitro Model for Ligament Wound Healing

Ligament wound healing involves the proliferation of a dense and disorganized fibrous matrix that slowly remodels into scar tissue at the injury site. This remodeling process does not fully restore the highly aligned collagen network that exists in native tissue, and consequently repaired ligament has decreased strength and durability. In order to identify treatments that stimulate collagen alignment and strengthen ligament repair, there is a need to develop in vitro models to study fibroblast activation during ligament wound healing. The objective of this study was to measure gene expression and matrix protein accumulation in fibroblast-collagen gels that were subjected to different static stress conditions (stress-free, biaxial stress, and uniaxial stress) for three time points (1, 2 or 3 weeks). By comparing our in vitro results to prior in vivo studies, we found that stress-free gels had time-dependent changes in gene expression (col3a1, TnC) corresponding to early scar formation, and biaxial stress gels had protein levels (collagen type III, decorin) corresponding to early scar formation. This is the first study to conduct a targeted evaluation of ligament healing biomarkers in fibroblast-collagen gels, and the results suggest that biomimetic in-vitro models of early scar formation should be initially cultured under biaxial stress conditions.

Mechanic stress generated by a time-varying electromagnetic field on bone surface

Bone cells sense mechanical load, which is essential for bone growth and remodeling. In a fracture, this mechanism is compromised. Electromagnetic stimulation has been widely used to assist in bone healing, but the underlying mechanisms are largely unknown. A recent hypothesis suggests that electromagnetic stimulation could influence tissue biomechanics; however, a detailed quantitative understanding of EM-induced biomechanical changes in the bone is unavailable. This paper used a muscle/bone model to study the biomechanics of the bone under EM exposure. Due to the dielectric properties of the muscle/bone interface, a time-varying magnetic field can generate both compressing and shear stresses on the bone surface, where many mechanical sensing cells are available for cellular mechanotransduction. I calculated these stresses and found that the shear stress is significantly greater than the compressing stress. Detailed parametric analysis suggests that both the compressing and shear stresses are dependent on the geometrical and electrical properties of the muscle and the bone. These stresses are also functions of the orientation of the coil and the frequency of the magnetic field. It is speculated that the EM field could apply biomechanical influence to fractured bone, through the fine-tuning of the controllable field parameters. Graphical abstract Mechanic stress on bone surface in a time-varying magnetic field.

Matrix Metalloproteinases in Bone Resorption, Remodeling, and Repair

Matrix metalloproteinases (MMPs) are the major protease family responsible for the cleavage of the matrisome (global composition of the extracellular matrix (ECM) proteome) and proteins unrelated to the ECM, generating bioactive molecules. These proteins drive ECM remodeling, in association with tissue-specific and cell-anchored inhibitors (TIMPs and RECK, respectively). In the bone, the ECM mediates cell adhesion, mechanotransduction, nucleation of mineralization, and the immobilization of growth factors to protect them from damage or degradation. Since the first description of an MMP in bone tissue, many other MMPs have been identified, as well as their inhibitors. Numerous functions have been assigned to these proteins, including osteoblast/osteocyte differentiation, bone formation, solubilization of the osteoid during bone resorption, osteoclast recruitment and migration, and as a coupling factor in bone remodeling under physiological conditions. In turn, a number of pathologies, associated with imbalanced bone remodeling, arise mainly from MMP overexpression and abnormalities of the ECM, leading to bone osteolysis or bone formation. In this review, we will discuss the functions of MMPs and their inhibitors in bone cells, during bone remodeling, pathological bone resorption (osteoporosis and bone metastasis), bone repair/regeneration, and emergent roles in bone bioengineering.

Involvement of 3D osteoblast migration and bone apatite during in vitro early osteocytogenesis

The transition from osteoblast to osteocyte is described to occur through passive entrapment mechanism (self-buried, or embedded by neighboring cells). Here, we provide evidence of a new pathway where osteoblasts are "more" active than generally assumed. We demonstrate that osteoblasts possess the ability to migrate and differentiate into early osteocytes inside dense collagen matrices. This step involves MMP-13 simultaneously with IBSP and DMP1 expression. We also show that osteoblast migration is enhanced by the presence of apatite bone mineral. To reach this conclusion, we used an in vitro hybrid model based on both the structural characteristics of the osteoid tissue (including its density, texture and three-dimensional order), and the use of bone-like apatite. This finding highlights the mutual dynamic influence of osteoblast cell and bone extra cellular matrix. Such interactivity extends the role of physicochemical effects in bone morphogenesis complementing the widely studied molecular signals. This result represents a conceptual advancement in the fundamental understanding of bone formation.

Interplay of Substrate Conductivity, Cellular Microenvironment, and Pulsatile Electrical Stimulation toward Osteogenesis of Human Mesenchymal Stem Cells in Vitro

The influences of physical stimuli such as surface elasticity, topography, and chemistry over mesenchymal stem cell proliferation and differentiation are well investigated. In this context, a fundamentally different approach was adopted, and we have demonstrated the interplay of inherent substrate conductivity, defined chemical composition of cellular microenvironment, and intermittent delivery of electric pulses to drive mesenchymal stem cell differentiation toward osteogenesis. For this, conducting polyaniline (PANI) substrates were coated with collagen type 1 (Coll) alone or in association with sulfated hyaluronan (sHya) to form artificial extracellular matrix (aECM), which mimics the native microenvironment of bone tissue. Further, bone marrow derived human mesenchymal stem cells (hMSCs) were cultured on these moderately conductive (10(-4)-10(-3) S/cm) aECM coated PANI substrates and exposed intermittently to pulsed electric field (PEF) generated through transformer-like coupling (TLC) approach over 28 days. On the basis of critical analysis over an array of end points, it was inferred that Coll/sHya coated PANI (PANI/Coll/sHya) substrates had enhanced proliferative capacity of hMSCs up to 28 days in culture, even in the absence of PEF stimulation. On the contrary, the adopted PEF stimulation protocol (7 ms rectangular pulses, 3.6 mV/cm, 10 Hz) is shown to enhance osteogenic differentiation potential of hMSCs. Additionally, PEF stimulated hMSCs had also displayed different morphological characteristics as their nonstimulated counterparts. Concomitantly, earlier onset of ALP activity was also observed on PANI/Coll/sHya substrates and resulted in more calcium deposition. Moreover, real-time polymerase chain reaction results indicated higher mRNA levels of alkaline phosphatase and osteocalcin, whereas the expression of other osteogenic markers such as Runt-related transcription factor 2, Col1A, and osteopontin exhibited a dynamic pattern similar to control cells that are cultured in osteogenic medium. Taken together, our experimental results illustrate the interplay of multiple parameters such as substrate conductivity, electric field stimulation, and aECM coating on the modulation of hMSC proliferation and differentiation in vitro.

Nanotopography-guided tissue engineering and regenerative medicine

Human tissues are intricate ensembles of multiple cell types embedded in complex and well-defined structures of the extracellular matrix (ECM). The organization of ECM is frequently hierarchical from nano to macro, with many proteins forming large scale structures with feature sizes up to several hundred microns. Inspired from these natural designs of ECM, nanotopography-guided approaches have been increasingly investigated for the last several decades. Results demonstrate that the nanotopography itself can activate tissue-specific function in vitro as well as promote tissue regeneration in vivo upon transplantation. In this review, we provide an extensive analysis of recent efforts to mimic functional nanostructures in vitro for improved tissue engineering and regeneration of injured and damaged tissues. We first characterize the role of various nanostructures in human tissues with respect to each tissue-specific function. Then, we describe various fabrication methods in terms of patterning principles and material characteristics. Finally, we summarize the applications of nanotopography to various tissues, which are classified into four types depending on their functions: protective, mechano-sensitive, electro-active, and shear stress-sensitive tissues. Some limitations and future challenges are briefly discussed at the end.

Gap Junctions and Biophysical Regulation of Bone Cells

Communication between osteoblasts, osteoclasts, and osteocytes is integral to their ability to build and maintain the skeletal system and respond to physical signals. Various physiological mechanisms, including nerve communication, hormones, and cytokines, play an important role in this process. More recently, the important role of direct, cell-cell communication via gap junctions has been established. In this review, we demonstrate the integral role of gap junctional intercellular communication (GJIC) in skeletal physiology and bone cell mechanosensing.

A gaussian model for substrates of entangled cross-linked poly(ethylene glycol) in biomedical applications

Cells usually spread on a synthetic substrate through bonds between receptors and chemical groups on the substrate (ligands). Therefore, it is valuable to study the effects of the average number density of these chemical groups and the average distance between them to model and predict the cell behavior. Poly(ethylene glycol) [PEG] modified with peptide groups has been used widely in biomedical applications as a substrate material. In this study, a coarse-grained model is proposed for PEG to predict the average number density of ligands and the average distance between them. Molecular information such as initial molecular weight distribution, average molecular weight between cross-links, and average molecular weight between entanglements is used as input parameters. Based on simulation results, it is concluded that both entanglement and cross-link densities are required to create a network structure. The results suggest that an average initial molecular weight 2-3 times the average molecular weight between entanglements and a moderate cross-link density are sufficient to create a closed network structure with a high ligand density and a small average distance between them.

Mechanics rules cell biology

Cells in the musculoskeletal system are subjected to various mechanical forces in vivo. Years of research have shown that these mechanical forces, including tension and compression, greatly influence various cellular functions such as gene expression, cell proliferation and differentiation, and secretion of matrix proteins. Cells also use mechanotransduction mechanisms to convert mechanical signals into a cascade of cellular and molecular events. This mini-review provides an overview of cell mechanobiology to highlight the notion that mechanics, mainly in the form of mechanical forces, dictates cell behaviors in terms of both cellular mechanobiological responses and mechanotransduction.

Effects of low-amplitude, high-frequency vibrations on proliferation and differentiation of SAOS-2 human osteogenic cell line

The aim of the work was to understand the consequences of low-amplitude, high-frequency vibrations on proliferation and differentiation of SAOS-2 cells (sarcoma osteogenetic), an osteoblastic and tumorigenic cell line. We realized a bioreactor composed of an eccentric motor that produces a displacement of 11 mm at frequencies between 1 and 120 Hz on a plate connected to the motor. The cultures of SAOS-2 cells were fixed on the plate, and the linear acceleration provoked by the motor to the cultures was measured. We used 30 Hz as stimulating frequency after a preliminary test on the effect of different frequencies on differentiation of cells. Afterward, SAOS-2 cells were stimulated with 30 Hz for different durations, every day for 4 days. The expression of some genes involved in the differentiation process was analyzed first with a reverse transcriptase-polymerase chain reaction and afterward with a real-time polymerase chain reaction on the most expressed genes. Moreover, the proliferation of cells was evaluated. The results suggest a strong increase in the expression of the genes involved in tissue differentiation in the treated groups with respect to the controls. On the other hand, the proliferation seems to be slowed down, so probably the acceleration perceived by the mechanosensors of the cells changes the cellular cycle by blocking the duplication to early differentiate toward bone tissue.

Transient dynamic actin cytoskeletal change stimulates the osteoblastic differentiation

Dynamic cytoskeletal changes appear to be one of intracellular signals that control cell differentiation. To test this hypothesis, we examined the effects of short-term actin cytoskeletal changes on osteoblastic differentiation. We found an actin polymerization interfering reagent, cytochalasin D, promoted osteoblastic differentiation in mouse preosteoblastic MC3T3-E1 cells. We also found that these effects were mediated by the protein kinase D (PKD) pathway. Short-term cytochalasin D treatment increased alkaline phosphatase (ALP) activity, osteocalcin (OCN) secretion, and mineralization of the extracellular matrix in MC3T3-E1 cells, with temporary changes in actin cytoskeleton. Furthermore, the disruption of actin cytoskeleton induced phosphorylation of 744/748 serine within the activation loop of PKD in a dose-dependent manner. The protein kinase C (PKC)/PKD inhibitor Go6976 suppressed cytochalasin D-induced acceleration of osteoblastic differentiation, whereas Go6983, a specific inhibitor of conventional PKCs, did not. Involvement of PKD signaling was confirmed by using small interfering RNA to knock down PKD. In addition, another actin polymerization interfering reagent, latrunculin B, also stimulated ALP activity and OCN secretion with PKD activation. On the other hand, the present data suggested that transient dynamic actin cytoskeletal reorganization could be a novel cellular signal that directly stimulated osteoblastic differentiation.

MMP-3 response to compressive forces in vitro and in vivo

During orthodontic tooth movement, bone resorption occurs at the compression site. However, the mechanism underlying resorption remains unclear. Applying compressive force to human osteoblast-like cells grown in a 3D collagen gel, we examined gene induction by using microarray and RT-PCR analysis. Among 43 genes exhibiting significant changes, cyclo-oxygenase-2, ornithine decarboxylase, and matrix metalloproteinase-3 (MMP-3) were up-regulated, whereas membrane-bound interleukin-1 receptor accessory protein was down-regulated. The MMP-3 protein increases were further confirmed by Western blot. To ascertain whether MMP-3 is up-regulated in vivo by orthodontic force, we examined human bone samples at the compressive site by realigning the angulated molars. Immunohistochemical staining revealed MMP-3 distributed along the compressive site of the bony region within 3 days of compression. Since MMP-3 participates in degradation of a wide range of extracellular matrix molecules, we propose that MMP-3 plays an important role in bone resorption during orthodontic tooth movement.

Biological Properties of Crosslinked Salmon Collagen Fibrillar Gel as a Scaffold for Human Umbilical Vein Endothelial Cells

Collagen derived from chum salmon (Oncorhynchus keta) was crosslinked with 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) during collagen fibrillogenesis and applied to an in vitro cell culture to evaluate its potential use as a scaffold for vascular tissue engineering. Human umbilical vein endothelial cells (HUVEC) were cultured on the crosslinked salmon collagen fibrillar gel (EDC-SC gel), and their growth rates and production levels of cytokines, including platelet-derived growth factor-BB and von Willebrand factor, were measured. Comparison was also made with bovine collagen gel crosslinked with EDC (EDC-BC gel). The growth and cytokine production of the HUVEC cultured on the EDC-SC gel were higher than those on the EDC-BC gel. In addition, HUVEC were found to attach to the EDC-BC gel through α2β1 integrin for native collagen, whereas they attached to the EDC-SC gel through αvβ3 integrin for denatured collagen as well as the α2β1 integrin, indicating that HUVEC recognized denatured domains in the EDC-SC gel. In conclusion, the EDC-SC gel can be used as a scaffold to support HUVEC growth, although the integrin-mediated attachment manner differs between the two gels.

Influences of hyaluronan on type II collagen fibrillogenesis in vitro

The effect to the kinetics of type II collagen fibrillogenesis with the addition of hyaluronan (HA), (Mw of 1.8x10(6) Da), at various concentrations of HA (0.01, 0.05 and 0.1 wt.%) for a series of fibril formation systems was examined in this study. Evidences deduced from the turbidity-time curves revealed that the inclusion of HA had minor or no impact to the fibrillogenesis of type II collagen (collagen conc. at 0.2 mg/mL). The apparent rate constants, klag (lag phase) increased slightly but kg (growth phase) decreased not very significantly with addition of HA, as compared to the case of pure collagen. This leads us to believe tentatively that, with the addition of HA to collagen solutions, the nucleation process of the fibril formation might have been sped up slightly whereas the growth process slowed up slightly. However, data from TEM observations on the resulting fibrils indicated that the presence of HA did not significantly affect the diameters and the characteristic D-banding periods of the collagen fiber formed. And, from the statistical analyses, we found only insignificant difference (P>0.05) between the specimens from the various experimental groups. It seems to indicate that the ultimate packing of collagen monomers was probably not interfered or affected significantly by the presence of HA in vitro.

Cyclic mechanical compression increases mineralization of cell-seeded polymer scaffolds in vivo

Despite considerable documentation of the ability of normal bone to adapt to its mechanical environment, very little is known about the response of bone grafts or their substitutes to mechanical loading even though many bone defects are located in load-bearing sites. The goal of this research was to quantify the effects of controlled in vivo mechanical stimulation on the mineralization of a tissue-engineered bone replacement and identify the tissue level stresses and strains associated with the applied loading. A novel subcutaneous implant system was designed capable of intermittent cyclic compression of tissue-engineered constructs in vivo. Mesenchymal stem cell-seeded polymeric scaffolds with 8 weeks of in vitro preculture were placed within the loading system and implanted subcutaneously in male Fisher rats. Constructs were subjected to 2 weeks of loading (3 treatments per week for 30 min each, 13.3 N at 1 Hz) and harvested after 6 weeks of in vivo growth for histological examination and quantification of mineral content. Mineralization significantly increased by approximately threefold in the loaded constructs. The finite element method was used to predict tissue level stresses and strains within the construct resulting from the applied in vivo load. The largest principal strains in the polymer were distributed about a modal value of -0.24% with strains in the interstitial space being about five times greater. Von Mises stresses in the polymer were distributed about a modal value of 1.6 MPa, while stresses in the interstitial tissue were about three orders of magnitude smaller. This research demonstrates the ability of controlled in vivo mechanical stimulation to enhance mineralized matrix production on a polymeric scaffold seeded with osteogenic cells and suggests that interactions with the local mechanical environment should be considered in the design of constructs for functional bone repair.

In vitro growth and differentiated activities of human periodontal ligament fibroblasts cultured on salmon collagen gel

Marine-derived collagen is expected to be a much safer alternative to calf collagen, which in medical applications carries the risk of bovine spongiform encephalopathy. In this study, acid-soluble collagen was extracted from salmon skin and crosslinked with 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide during fibril formation to produce a crosslinked salmon collagen (SC) gel. The growth rates and the differentiated functions of human periodontal ligament fibroblasts (HPdLFs) cultured on the SC gel were investigated. Growth was faster on the SC gel than on porcine collagen (PC) gel. In addition, the HPdLFs cultured on the SC gel exhibited higher alkaline phosphatase (ALP) activity than those cultured on the PC gel. Quantitative RT-PCR revealed higher mRNA expression of type I collagen, ALP, and osteocalcin in the HPdLFs cultured on the SC gel. HPdLFs had a flat shape on the SC gel and a spindle shape on the PC gel, as revealed by observation with scanning electron microscopy and immunostaining with cytoskeletal protein and vinculin. The results showed that HPdLFs could grow and show highly differentiated activity on the SC gel as well as on the PC gel.

Bone Regeneration on Macroporous Aqueous-Derived Silk 3-D Scaffolds

Spinner flask culture under osteogenic conditions was used to study osteogenic outcomes from human bone marrow-derived mesenchymal stem cells (hMSCs) seeded on aqueous-derived porous silk scaffolds. Of particular novelty was the use of larger sized scaffolds (15 mm diameter, 5 mm thick) and large pore sizes ( approximately 900-1 000 micron diameter). Cultures were maintained for 84 d in the spinner flasks and compared to static controls under otherwise similar conditions. The spinner flask cultures demonstrated enhanced cell proliferation compared to static cultures and the improved fluid flow promoted significantly improved osteogenic related outcomes based on elevated alkaline phosphatase (ALP) activity and the deposition of mineralized matrix. The expression of osteogenic differentiation associated markers based on real time PCR also demonstrated increased responses under the dynamic spinner flask culture conditions. Histological analysis showed organized bone-like structures in the constructs cultured in the spinner flasks after 56 d of culture. These structures stained intensely with von Kossa. The combination of improved transport due to spinner flask culture and the use of macroporous 3D aqueous-derived silk scaffolds with large pore sizes resulted in enhanced outcomes related to bone tissue engineering, even with the use of large sized scaffolds in the study. These results suggest the importance of the structure of the silk biomaterial substrate (water vs. solvent based preparation) and large pore sizes in improved bone-like outcomes during dynamic cultivation.

Part I: A novel in-vitro system for simultaneous mechanical stimulation and time-lapse microscopy in 3D

To investigate the migration response of cells to changes in their biophysical environment, a novel uniaxial cell stimulation device (UCSD) has been designed and tested. The device is capable of applying very precise user-defined static or dynamic mechanical stimuli in a physiologically relevant strain window (up to 50%) and frequency bandwidth (up to 2 Hz) to cells residing in a three-dimensional (3D) environment while single-cell migration is simultaneously measured by time-lapse microscopy. The system is an advancement over uniaxial loading devices reported to date in that it allows temporal and spatial quantification of migration as a function of the micromechanical environment. We make use of the favorable physical and biological properties of poly(ethylene glycol) hydrogels as model matrix and present a method for fabricating cell-containing hydrogel constructs. The 3D strain field within these constructs is modeled by finite element analysis. Fibroblasts reversibly altered their morphology and orientation in response to the strain field. In the succeeding companion paper we then exploit the system to analyze fibroblast motility induced by different stimulation regimes (refer to part II).

Activities of MC3T3-E1 cells cultured on gamma-irradiated salmon atelocollagen scaffold

We investigated the effect of gamma-irradiation on the activities of MC3T3-E1 cells cultured on gamma-irradiated salmon atelocollagen (SAC) scaffolds. SAC-cultured samples were irradiated at doses of 10, 15, and 25 kGy. Gamma-irradiation had a significant impact on the activities of MC3T3-E1 cells. The proliferation rates and alkaline phosphatase activities of MC3T3-E1 cells increased with gamma-irradiation dose.

Chondrocyte intracellular calcium, cytoskeletal organization, and gene expression responses to dynamic osmotic loading

While chondrocytes in articular cartilage experience dynamic stimuli from joint loading activities, few studies have examined the effects of dynamic osmotic loading on their signaling and biosynthetic activities. We hypothesize that dynamic osmotic loading modulates chondrocyte signaling and gene expression differently than static osmotic loading. With the use of a novel microfluidic device developed in our laboratory, dynamic hypotonic loading (−200 mosM) was applied up to 0.1 Hz and chondrocyte calcium signaling, cytoskeleton organization, and gene expression responses were examined. Chondrocytes exhibited decreasing volume and calcium responses with increasing loading frequency. Phalloidin staining showed osmotic loading-induced changes to the actin cytoskeleton in chondrocytes. Real-time PCR analysis revealed a stimulatory effect of dynamic osmotic loading compared with static osmotic loading. These studies illustrate the utility of the microfluidic device in cell signaling investigations, and their potential role in helping to elucidate mechanisms that mediate chondrocyte mechanotransduction to dynamic stimuli.

Impact of supplement withdrawal and wheat middling inclusion on bone metabolism, bone strength, and the incidence of bone fractures occurring at slaughter in pigs1

The objective of this study was to determine if supplement withdrawal (omission of dietary vitamin and trace mineral premixes and 2/3 of inorganic P) 28-d preslaughter and the feeding of wheat middlings (dietary concentrations of 5, 15, or 30% from weaning to 16 kg, 16 to 28 kg, and 28 kg to slaughter, respectively) affect bone metabolism, bone strength, bone density, and the incidence of bone fractures at slaughter in pigs. Crossbred barrows (n = 64) were assigned to a 2 x 2 factorial arrangement of treatments (with or without supplement withdrawal, and with or without wheat middlings). Serum was collected on d 0, 14, and 27 of the preslaughter withdrawal period to determine changes in the concentrations of osteocalcin, an indicator of bone formation, and pyridinoline, an indicator of bone resorption. The serum osteocalcin and pyridinoline concentrations on d 14 and 27 were analyzed as change from the d-0 concentration. At slaughter, radiographs of the lumbar vertebrae and of the right and left femurs were taken to determine the incidence of bone fractures. Third metacarpal bones were analyzed for bone mineral density, peak load, ultimate shear stress, and percent ash. Supplement withdrawal increased (P < 0.05) serum osteocalcin and pyridinoline concentrations, indicating an increase in osteoblast activity and bone resorption. Supplement withdrawal decreased (P < 0.01) bone mineral density, peak load, ultimate shear stress, and percent ash of the metacarpal bones. Dietary wheat middling inclusion did not alter bone quality. Neither supplement withdrawal nor wheat middling inclusion affected the incidence of bone fractures at slaughter. The results of this study indicate that removing inorganic P, vitamin premix, and trace mineral premix for 28 d preslaughter increases bone turnover and decreases bone quality.

Decreased CD90 expression in human mesenchymal stem cells by applying mechanical stimulation

Background

Mesenchymal stem cells (MSC) are multipotent cells which can differentiate along osteogenic, chondrogenic, and adipogenic lineages. The present study was designed to investigate the influence of mechanical force as a specific physiological stress on the differentiation of (MSC) to osteoblast-like cells.

Methods

Human MSC were cultured in osteoinductive medium with or without cyclic uniaxial mechanical stimulation (2000 μstrain, 200 cycles per day, 1 Hz). Cultured cells were analysed for expression of collagen type I, osteocalcin, osteonectin, and CD90. To evaluate the biomineral formation the content of bound calcium in the cultures was determined.

Results

After 14 days in culture immunfluorescence staining revealed enhancement of collagen type I and osteonectin expression in response to mechanical stimulation. In contrast, mechanically stimulated cultures stained negative for CD90. In stimulated and unstimulated cultures an increase in the calcium content over time was observed. After 21 days in culture the calcium content in mechanical stimulated cultures was significantly higher compared to unstimulated control cultures.

Conclusion

These results demonstrate the influence of mechanical force on the differentiation of human MSC into osteoblast-like cells in vitro. While significant enhancement of the biomineral formation by mechanical stimulation is not detected before 21 days, effects on the extracellular matrix became already obvious after 14 days. The decrease of CD90 expression in mechanically stimulated cultures compared to unstimulated control cultures suggests that CD90 is only transiently expressed expression during the differentiation of MSC to osteoblast-like cells in culture.

Magneto-mechanical stimulation of bone growth in a bonded array of ferromagnetic fibres

A brief experimental and theoretical study is presented into the elastic deformation of bonded arrays of ferromagnetic fibres, when subjected to an external magnetic field. Material made of such fibre arrays is of potential interest for certain biomedical applications, such as prosthetic implants. Externally imposed magnetic fields could be used to generate mechanical strains in surrounding tissue, with possible physiological benefits. It is shown that it should be possible to generate strains within embryonic bone cell networks, forming within such a fibre array, which are sufficient to stimulate enhanced growth. The effects outlined here could thus form the basis of surgical or therapeutic advances.

Effekte mechanischer Reize auf humane osteoblastäre Zellen in einer dreidimensionalen Kollagen-Typ-I-Matrix

BACKGROUND

The aim of the present study was to investigate the effect of mechanical strain on human osteoblastic precursor cells in a three-dimensional scaffold.

METHODS

Osteoblastic precursor cells were seeded in a collagen type I gel and mechanically stretched by daily application of cyclic uniaxial strain. The expression of histone H4, core binding factor 1, alkaline phosphatase, osteopontin, osteocalcin, and collagen type I was investigated by analysing the mRNA. Cell and matrix orientation were investigated by scanning electron microscopy.

RESULTS

Cyclic stretching increased cell proliferation. The expression of osteogenic markers was slightly increased by mechanical strain. The cells and matrix were strictly oriented in the stress direction.

CONCLUSION

The application of mechanical load might have a beneficial effect on the quality and quantity of generated bone tissue and might be a important factor in tissue engineering of bone.

Bone tissue engineering by primary osteoblast-like cells in a monolayer system and 3-dimensional collagen gel

PURPOSE

To engineer living bone tissue in vitro, bone cells must be multiplied and differentiated in cell culture. Osteoblasts are known to be the crucial cells responsible for the bone modeling process. Periosteal-derived osteoblasts were therefore cultured for up to 3 weeks in Petri dishes as well as in a 3-dimensional collagen gel.

METHODS

Proliferation, migration, and differentiation of cells as well as the synthesis of extracellular matrix proteins were monitored during the culture period by histology, electron microscopy, and immunohistochemistry. Mineral formation was investigated by electron diffraction studies and element analysis.

RESULTS

Osteoblasts proliferated and migrated in Petri dishes as well as in the collagen gel without loss of viability during the whole experimental period. They demonstrated a mature osteoblast phenotype as indicated by the synthesis of a bone-like extracellular matrix. They formed an extracellular matrix containing osteocalcin, osteonectin, and newly synthesized collagen type I in both environments. Mineral formation was seen in colocalization with the bone-like extracellular matrix proteins in Petri dishes. Microanalytical investigations revealed a matrix vesicle-mediated mineral formation at early stages of culture.

CONCLUSIONS

Our cell culture confirmed the ability to multiplicate differentiated and viable osteoblast-like cells in 2- and 3-dimensional space. Additionally, bone-like mineralization can be induced by primary osteoblasts in monolayer culture. The data suggest that this approach can be used as a tool in bone tissue engineering.

Preparation of porous scaffolds by using freeze-extraction and freeze-gelation methods

Freeze-fixation and freeze-gelation methods are presented in this paper which can be used to prepare highly porous scaffolds without using the time and energy consuming freeze-drying process. The porous structure was generated during the freeze of a polymer solution, following which either the solvent was extracted by a non-solvent or the polymer was gelled under the freezing condition; thus, the porous structure would not be destructed during the subsequent drying stage. Compared with the freeze-drying method, the presented methods are time and energy-saving, with less residual solvent, and easier to be scaled up. Besides, the problem of formation of surface skin can be resolved and the limitation of using solvent with low boiling point can be lifted by the presented methods. With the freeze-extraction and freeze-gelation methods, porous PLLA, PLGA, chitosan and alginate scaffolds were successfully fabricated. In addition to the presentation of the morphologies of the fabricated scaffolds, preliminary data of cell culture on them are as well included in the present work.

Mechanotransduction of bone cellsin vitro: Mechanobiology of bone tissue

Mechanical force plays an important role in the regulation of bone remodelling in intact bone and bone repair. In vitro, bone cells demonstrate a high responsiveness to mechanical stimuli. Much debate exists regarding the critical components in the load profile and whether different components, such as fluid shear, tension or compression, can influence cells in differing ways. During dynamic loading of intact bone, fluid is pressed through the osteocyte canaliculi, and it has been demonstrated that fluid shear stress stimulates osteocytes to produce signalling molecules. It is less clear how mechanical loads act on mature osteoblasts present on the surface of cancellous or trabecular bone. Although tissue strain and fluid shear stress both cause cell deformation, these stimuli could excite different signalling pathways. This is confirmed by our experimental findings, in human bone cells, that strain applied through the substrate and fluid flow stimulate the release of signalling molecules to varying extents. Nitric oxide and prostaglandin E2 values increased by between two- and nine-fold after treatment with pulsating fluid flow (0.6 +/- 0.3 Pa). Cyclic strain (1000 microstrain) stimulated the release of nitric oxide two-fold, but had no effect on prostaglandin E2. Furthermore, substrate strains enhanced the bone matrix protein collagen I two-fold, whereas fluid shear caused a 50% reduction in collagen I. The relevance of these variations is discussed in relation to bone growth and remodelling. In applications such as tissue engineering, both stimuli offer possibilities for enhancing bone cell growth in vitro.

In vitro response of osteoblast-like and odontoblast-like cells to unsubstituted and substituted apatites

Different types of calcium phosphate compounds [calcium-deficient apatite (CDA); beta-tricalcium phosphate (beta-TCP); biphasic calcium phosphate (BCP)] are commercially available for medical and dental applications as bone substitute materials. Most of the reported in vitro studies on cell-material interactions have used osteoblast-like cells. The purpose of this study was to investigate the in vitro response of osteoblast-like (MC3T3-E1) and odontoblast-like (MDPC23) cells on unsubstituted (HA) and substituted (F-substituted) apatites. MC3T3-E1 and MDPC23 were cultured in alpha-modified medium containing 10% fetal bovine serum, ascorbic acid (50 microg/mL) and beta-glycerophosphate (2 mM). The cells were seeded on pellets made from HA, and FAp (with low, medium, and high F concentrations). Cell morphology was observed after 7 and 14 days using scanning electron microscopy (SEM). Cell attachment and differentiation were determined from the DNA content, alkaline phosphatase (ALP) activity, and total collagen content. Pellet surface composition was characterized by using Fourier Transform infrared spectroscopy. MC3T3-E1 and MDPC23 cells on HA were normal in shape and in fusion but not on FAp. Results of this study showed that the pattern of cell proliferation of osteoblast-like cells was different from that of the odontoblast-like cells. This study suggests that cell morphology, fusion, and proliferation on biomaterial surfaces depend on cell type (osteoblast-like vs odontoblast-like cell) and biomaterial composition (unsubstituted vs substituted F-apatites).

Uniaxial cyclic stretch induces osteogenic differentiation and synthesis of bone morphogenetic proteins of spinal ligament cells derived from patients with ossification of the posterior longitudinal ligaments

Ossification of the posterior longitudinal ligament of the spine (OPLL) is characterized by ectopic bone formation in the spinal ligaments. Mechanical stress, which acts on the posterior ligaments, is thought to be an important factor in the progression of OPLL. To elucidate this mechanism, we investigated the effects of in vitro sinusoidal cyclic stretch (120% peak to peak, at 1 Hz) on cultured spinal ligament cells derived from OPLL and non-OPLL patients. The mRNA expressions of alkaline phosphatase (ALP), osteopontin, bone morphogenetic protein (BMP)-2, BMP-4, and BMP receptors as well as ALP activity in cell layers and production of BMPs into the conditioned medium were significantly increased by cyclic stretch in OPLL cells, whereas no change was observed in non-OPLL cells. A stretch-activated Ca(2+) channel blocker, Gd(3+), the voltage-dependent L-type Ca(2+) channel blockers diltiazem and nifedipine, and Ca(2+)-free medium suppressed stretch-induced ALP activity, which suggests a role of Ca(2+) influx in the signal transduction of mechanical stress to the osteogenic response of OPLL cells. Our study provides first evidences that mechanical stress plays a key role in the progression of OPLL through the induction of osteogenic differentiation in spinal ligament cells and the promotion of the autocrine/paracrine mechanism of BMPs in this lesion.

IN SITU COLLAGEN GELATION: A NEW METHOD FOR CONSTRUCTING LARGE TISSUE IN ROTARY CULTURE VESSELS

In situ collagen gelation is a method that combines a static three-dimensional culture technique with rotating bioreactors. This method was designed for large dense tissue engineering ex vivo. To challenge the current limitations on size, we combined the static collagen gel embedding method with high-aspect ratio rotating bioreactors. Rat calvarial cells in gelated collagens were cultured in rotating vessels with 5 mM beta-glycerophosphate-containing medium for 1, 2, or 3 wk and then analyzed for cell morphology, cell distribution, and viability, as well as for contraction of the collagen gel. The size of collagen gels with rat calvarial cells averaged 2.8 cm in diameter x 0.25 cm in thickness at the end of 3 wk. Scanning electron microscopy and laser scanning confocal microscopy of collagen gels revealed a homogeneous distribution of living cells. Despite the barrier effects from induced calcification, in collagen gels, cell metabolic activity (alkaline phosphatase assay and 3-[4,5-dimethyl-2-thiazolyl]-2,5-diphenyl-2H-tetrazolium bromide assay) increased over the 3 wk, and cell viability (trypan blue exclusion and flow cytometry analysis) remained at about 90% at the end of 3 wk. Based on our results, we determined that in situ collagen gelation provides a feasible method for engineering large dense tissue ex vivo.

Effects of broad frequency vibration on cultured osteoblasts

Bone is subjected in vivo to both high amplitude, low frequency strain, incurred by locomotion, and to low amplitude, broad frequency strain. The biological effects of low amplitude, broad frequency strain are poorly understood. To evaluate the effects of low amplitude strains ranging in frequency from 0 to 50 Hz on osteoblastic function, we seeded MC3T3-E1 cells into collagen gels and applied the following loading protocols for 3 min per day for either 3 or 7 days: (1) sinusoidal strain at 3 Hz, with 0-3000 microstrain peak-to-peak followed by 0.33 s resting time, (2) "broad frequency vibration" of low amplitude strain (standard deviation of 300 microstrain) including frequency components from 0 to 50 Hz, and (3) sinusoidal strain combined with broad frequency vibration (S + V). The cells were harvested on day 4 or 8. We found that the S + V stimulation significantly repressed cell proliferation by day 8. Osteocalcin mRNA was up-regulated 2.6-fold after 7 days of S + V stimulation, and MMP-9 mRNA was elevated 1.3-fold after 3 days of vibration alone. Sinusoidal stimulation alone did not affect the cell responses. No differences due to loading were observed in alkaline phosphatase activity and in mRNA levels of type I collagen, osteopontin, connexin 43, MMPs-1A, -3, -13. These results suggest that osteoblasts are more sensitive to low amplitude, broad frequency strain, and this kind of strain could sensitize osteoblasts to high amplitude, low frequency strain. This suggestion implies a potential contribution of stochastic resonance to the mechanical sensitivity of osteoblasts.

Hydrogel properties influence ECM production by chondrocytes photoencapsulated in poly(ethylene glycol) hydrogels

When using hydrogel scaffolds for cartilage tissue engineering, two gel properties are particularly important: the equilibrium water content (q, equilibrium swelling ratio) and the compressive modulus, K. In this work, chondrocytes were photoencapsulated in degrading and nondegrading poly(ethylene glycol)-based hydrogels to assess extracellular matrix (ECM) formation as a function of these gel properties. In nondegrading gels, the glycosaminoglycan (GAG) content was not significantly different in gels when q was varied from 4.2 to 9.3 after 2 and 4 weeks in vitro. However, gels with a q of 9.3 allowed GAGs to diffuse throughout the gels homogenously, but a q < or = 5.2 resulted in localization of GAGs pericellularly. Interestingly, in the moderately crosslinked gels with a K of 360 kPa, an increase in type II collagen synthesis was observed compared with gels with a higher (960 kPa) and lower (30 kPa) K after 4 weeks. With the incorporation of degradable linkages into the network, gel properties with an initially high K (350 kPa) and final high q (7.9) were obtained, which allowed for increased type II collagen synthesis coupled with a homogenous distribution of GAGs. Thus, a critical balance exists between gel swelling, mechanics, and degradation in forming a functional ECM.

Biomaterials and bone mechanotransduction

Bone is an extremely complex tissue that provides many essential functions in the body. Bone tissue engineering holds great promise in providing strategies that will result in complete regeneration of bone and restoration of its function. Currently, such strategies include the transplantation of highly porous scaffolds seeded with cells. Prior to transplantation the seeded cells are cultured in vitro in order for the cells to proliferate, differentiate and generate extracellular matrix. Factors that can affect cellular function include the cell-biomaterial interaction, as well as the biochemical and the mechanical environment. To optimize culture conditions, good understanding of these parameters is necessary. The new developments in bone biology, bone cell mechanotransduction, and cell-surface interactions are reviewed here to demonstrate that bone mechanotransduction is strongly influenced by the biomaterial properties.

Fluid shear stress-induced cyclooxygenase-2 expression is mediated by C/EBP beta, cAMP-response element-binding protein, and AP-1 in osteoblastic MC3T3-E1 cells

Mechanical loading is crucial for maintenance of bone integrity and architecture, and prostaglandins are an important mediator of mechanosensing. Cyclooxygenase-2 (COX-2), an inducible isoform of prostaglandin G/H synthase, is induced by mechanical loading-derived fluid shear stress in bone-forming cells such as osteoblasts and osteocytes. In this study, we investigated transcription factor and transcriptional regulatory elements responsible for the shear stress-induced COX-2 expression in osteoblastic MC3T3-E1 cells. When the cells were transfected with luciferase-reporter plasmids including the 5'-flanking region of the murine cox-2 gene, the fluid shear stress increased the luciferase activities, consistent with the induction of COX-2 mRNA and protein expression. Deletion analysis of the promoter region revealed that the shear stress-induced luciferase responses were regulated by two regions, -172 to -100 base pair (bp) and -79 to -46 bp, of the cox-2 promoter, in which putative cis-elements of C/EBP beta, AP-1, cAMP-response element-binding protein (CREB), and E box are included. Mutation of sites of C/EBP beta, AP-1, and/or cAMP-response element decreased the shear stress-induced luciferase activities, whereas mutation of the E box did not affect the responses. In an electrophoretic mobility shift assay, shear stress enhanced nuclear extract binding to double-stranded oligonucleotide probes containing C/EBP beta and AP-1-binding motifs, and the bands of the complexes were supershifted by the addition of antibody specific for each regulator. Although the binding activity of CREB toward its probe was unaffected by shear stress, the phosphorylation of CREB was enhanced by the stress. These data suggest that C/EBP beta, AP-1, and CREB play crucial roles in the shear stress-induced cox-2 expression in osteoblasts.