Dynamics of spheroid self-assembly in liquid-overlay culture of DU 145 human prostate cancer cells

Collective directional migration drives the formation of heteroclonal cancer cell clusters

Metastasisation occurs through the acquisition of invasive and survival capabilities that allow tumour cells to colonise distant sites. While the role of multicellular aggregates in cancer dissemination is acknowledged, the mechanisms that drive the formation of multiclonal cell aggregates are not fully elucidated. Here, we show that cancer cells of different tissue of origins can perform collective directional migration and can actively form heteroclonal aggregates in 3D, through a proliferation-independent mechanism. Coalescence of distant cell clusters is mediated by subcellular actin-rich protrusions and multicellular outgrowths that extend towards neighbouring aggregates. Coherently, perturbation of cytoskeletal dynamics impairs collective migration while myosin II activation is necessary for multicellular movements. We put forward the hypothesis that cluster attraction is mediated by secreted soluble factors. Such a hypothesis is consistent with the abrogation of aggregation by inhibition of PI3K/AKT/mTOR and MEK/ERK, the chemoattracting activity of conditioned culture media and with a wide screening of secreted proteins. Our results present a novel collective migration model and shed light on the mechanisms of formation of heteroclonal aggregates in cancer.

Comparative Evaluation of the Cytotoxicity of Doxorubicin in BT-20 Triple-Negative Breast Carcinoma Monolayer and Spheroid Cultures

Three-dimensional cell culture models are increasingly adopted as preferred pre-clinical drug testing platforms, as they circumvent limitations associated with traditional monolayer cell cultures. However, many of these models are not fully characterized. This study aimed to characterize a BT-20 triple-negative breast carcinoma spheroid model and assess its susceptibility to doxorubicin in comparison to a monolayer model. Spheroids were developed using the liquid overlay method. Phenotypic attributes were analyzed by characterizing changes in size, gross morphology, protein content, metabolic activity, hypoxic status, and cell-cell junctions. The cytotoxic range of doxorubicin in monolayers was determined using the sulforhodamine B assay, and the comparative effect of toxic and sub-toxic concentrations was assessed in both spheroids and monolayers. Similar to the in vivo microenvironment, spheroids had a heterogeneous spatial cytoarchitecture, inherent hypoxia and strong adherens junctions. Doxorubicin induced dose-dependent cytotoxicity in monolayers (IC₂₅: 130 nM, IC₅₀: 320 nM and IC₇₅: 1580 nM); however, these concentrations did not alter the spheroid size or acid phosphatase activity. Only concentrations ≥6 µM had any effect on spheroid integrity. In comparison to monolayers, the BT-20 spheroid model has decreased sensitivity to doxorubicin and could serve as a better model for susceptibility testing in triple-negative breast cancer.

A mechanobiological model for tumor spheroid evolution with application to glioblastoma: A continuum multiphysics approach

BACKGROUND

Spheroids are in vitro quasi-spherical structures of cell aggregates, eventually cultured within a hydrogel matrix, that are used, among other applications, as a technological platform to investigate tumor formation and evolution. Several interesting features can be replicated using this methodology, such as cell communication mechanisms, the effect of gradients of nutrients, or the creation of realistic 3D biological structures. The main objective of this work is to link the spheroid evolution with the mechanical activity of cells, coupled with nutrient consumption and the subsequent cell dynamics.

METHOD

We propose a continuum mechanobiological model which accounts for the most relevant phenomena that take place in tumor spheroid evolution under in vitro suspension, namely, nutrient diffusion in the spheroid, kinetics of cellular growth and death, and mechanical interactions among the cells. The model is qualitatively validated, after calibration of the model parameters, versus in vitro experiments of spheroids of different glioblastoma cell lines.

RESULTS

Our model is able to explain in a novel way quite different setups, such as spheroid growth (up to six times the initial configuration for U-87 MG cell line) or shrinking (almost half of the initial configuration for U-251 MG cell line); as the result of the mechanical interplay of cells driven by cellular evolution.

CONCLUSIONS

Glioblastoma tumor spheroid evolution is driven by mechanical interactions of the cell aggregate and the dynamical evolution of the cell population. All this information can be used to further investigate mechanistic effects in the evolution of tumors and their role in cancer disease.

Unsung versatility of elastin-like polypeptide inspired spheroid fabrication: A review

Lately, 3D cell culture technique has gained a lot of appreciation as a research model. Augmented with technological advancements, the area of 3D cell culture is growing rapidly with a diverse array of scaffolds being tested. This is especially the case for spheroid cultures. The culture of cells as spheroids provides opportunities for unanticipated vision into biological phenomena with its application to drug discovery, metabolic profiling, stem cell research as well as tumor, and disease biology. Spheroid fabrication techniques are broadly categorised into matrix-dependent and matrix-independent techniques. While there is a profusion of spheroid fabrication substrates with substantial biological relevance, an economical, modular, and bio-compatible substrate for high throughput production of spheroids is lacking. In this review, we posit the prospects of elastin-like polypeptides (ELPs) as a broad-spectrum spheroid fabrication platform. Elastin-like polypeptides are nature inspired, size-tunable genetically engineered polymers with wide applicability in various arena of biological considerations, has been employed for spheroid culture with profound utility. The technology offers a cheap, high-throughput, reproducible alternative for spheroid culture with exquisite adaptability. Here, we will brief the applicability of 3D cultures as compared to 2D cultures with spheroids being the focal point of the review. Common approaches to spheroid fabrication are discussed with existential limitations. Finally, the versatility of elastin-like polypeptide inspired substrates for spheroid culture has been discussed.

Let’s Go 3D! New Generation of Models for Evaluating Drug Response and Resistance in Prostate Cancer

Prostate cancer (PC) is the third most frequently diagnosed cancer worldwide and the second most frequent in men. Several risk factors can contribute to the development of PC, and those include age, family history, and specific genetic mutations. So far, drug testing in PC, as well as in cancer research in general, has been performed on 2D cell cultures. This is mainly because of the vast benefits these models provide, including simplicity and cost effectiveness. However, it is now known that these models are exposed to much higher stiffness; lose physiological extracellular matrix on artificial plastic surfaces; and show changes in differentiation, polarization, and cell–cell communication. This leads to the loss of crucial cellular signaling pathways and changes in cell responses to stimuli when compared to in vivo conditions. Here, we emphasize the importance of a diverse collection of 3D PC models and their benefits over 2D models in drug discovery and screening from the studies done so far, outlining their benefits and limitations. We highlight the differences between the diverse types of 3D models, with the focus on tumor–stroma interactions, cell populations, and extracellular matrix composition, and we summarize various standard and novel therapies tested on 3D models of PC for the purpose of raising awareness of the possibilities for a personalized approach in PC therapy.

3D Cell Culture Systems: Tumor Application, Advantages, and Disadvantages

The traditional two-dimensional (2D) in vitro cell culture system (on a flat support) has long been used in cancer research. However, this system cannot be fully translated into clinical trials to ideally represent physiological conditions. This culture cannot mimic the natural tumor microenvironment due to the lack of cellular communication (cell-cell) and interaction (cell-cell and cell-matrix). To overcome these limitations, three-dimensional (3D) culture systems are increasingly developed in research and have become essential for tumor research, tissue engineering, and basic biology research. 3D culture has received much attention in the field of biomedicine due to its ability to mimic tissue structure and function. The 3D matrix presents a highly dynamic framework where its components are deposited, degraded, or modified to delineate functions and provide a platform where cells attach to perform their specific functions, including adhesion, proliferation, communication, and apoptosis. So far, various types of models belong to this culture: either the culture based on natural or synthetic adherent matrices used to design 3D scaffolds as biomaterials to form a 3D matrix or based on non-adherent and/or matrix-free matrices to form the spheroids. In this review, we first summarize a comparison between 2D and 3D cultures. Then, we focus on the different components of the natural extracellular matrix that can be used as supports in 3D culture. Then we detail different types of natural supports such as matrigel, hydrogels, hard supports, and different synthetic strategies of 3D matrices such as lyophilization, electrospiding, stereolithography, microfluid by citing the advantages and disadvantages of each of them. Finally, we summarize the different methods of generating normal and tumor spheroids, citing their respective advantages and disadvantages in order to obtain an ideal 3D model (matrix) that retains the following characteristics: better biocompatibility, good mechanical properties corresponding to the tumor tissue, degradability, controllable microstructure and chemical components like the tumor tissue, favorable nutrient exchange and easy separation of the cells from the matrix.

Diversity Models and Applications of 3D Breast Tumor-on-a-Chip

Breast disease is one of the critical diseases that plague females, as is known, breast cancer has high mortality, despite significant pathophysiological progress during the past few years. Novel diagnostic and therapeutic approaches are needed to break the stalemate. An organ-on-chip approach is considered due to its ability to repeat the real conditions found in the body on microfluidic chips, offsetting the shortcomings of traditional 2D culture and animal tests. In recent years, the organ-on-chip approach has shown diversity, recreating the structure and functional units of the real organs/tissues. The applications were also developed rapidly from the laboratory to the industrialized market. This review focuses on breast tumor-on-a-chip approaches concerning the diversity models and applications. The models are summarized and categorized by typical biological reconstitution, considering the design and fabrication of the various breast models. The breast tumor-on-a-chip approach is a typical representative of organ chips, which are one of the precedents in the market. The applications are roughly divided into two categories: fundamental mechanism research and biological medicine. Finally, we discuss the prospect and deficiencies of the emerging technology. It has excellent prospects in all of the application fields, however there exist some deficiencies for promotion, such as the stability of the structure and function, and uniformity for quantity production.

Engineered Microsystems for Spheroid and Organoid Studies

3D in vitro model systems such as spheroids and organoids provide an opportunity to extend the physiological understanding using recapitulated tissues that mimic physiological characteristics of in vivo microenvironments. Unlike 2D systems, 3D in vitro systems can bridge the gap between inadequate 2D cultures and the in vivo environments, providing novel insights on complex physiological mechanisms at various scales of organization, ranging from the cellular, tissue-, to organ-levels. To satisfy the ever-increasing need for highly complex and sophisticated systems, many 3D in vitro models with advanced microengineering techniques have been developed to answer diverse physiological questions. This review summarizes recent advances in engineered microsystems for the development of 3D in vitro model systems. The relationship between the underlying physics behind the microengineering techniques, and their ability to recapitulate distinct 3D cellular structures and functions of diverse types of tissues and organs are highlighted and discussed in detail. A number of 3D in vitro models and their engineering principles are also introduced. Finally, current limitations are summarized, and perspectives for future directions in guiding the development of 3D in vitro model systems using microengineering techniques are provided.

Integrating Quantitative Assays with Biologically Based Mathematical Modeling for Predictive Oncology

We provide an overview on the use of biological assays to calibrate and initialize mechanism-based models of cancer phenomena. Although artificial intelligence methods currently dominate the landscape in computational oncology, mathematical models that seek to explicitly incorporate biological mechanisms into their formalism are of increasing interest. These models can guide experimental design and provide insights into the underlying mechanisms of cancer progression. Historically, these models have included a myriad of parameters that have been difficult to quantify in biologically relevant systems, limiting their practical insights. Recently, however, there has been much interest calibrating biologically based models with the quantitative measurements available from (for example) RNA sequencing, time-resolved microscopy, and in vivo imaging. In this contribution, we summarize how a variety of experimental methods quantify tumor characteristics from the molecular to tissue scales and describe how such data can be directly integrated with mechanism-based models to improve predictions of tumor growth and treatment response.

Cell – extracellular matrix interaction in glioma growth. In silico model

The study aims to investigate the role of viscoelastic interactions between cells and extracellular matrix (ECM) in avascular tumor growth. Computer simulations of glioma multicellular tumor spheroid (MTS) growth are being carried out for various conditions. The calculations are based on a continuous model, which simulates oxygen transport into MTS; transitions between three cell phenotypes, cell transport, conditioned by hydrostatic forces in cell–ECM composite system, cell motility and cell adhesion. Visco-elastic cell aggregation and elastic ECM scaffold represent two compressible constituents of the composite. Cell–ECM interactions form a Transition Layer on the spheroid surface, where mechanical characteristics of tumor undergo rapid transition. This layer facilitates tumor progression to a great extent. The study demonstrates strong effects of ECM stiffness, mechanical deformations of the matrix and cell–cell adhesion on tumor progression. The simulations show in particular that at certain, rather high degrees of matrix stiffness a formation of distant multicellular clusters takes place, while at further increase of ECM stiffness subtumors do not form. The model also illustrates to what extent mere mechanical properties of cell–ECM system may contribute into variations of glioma invasion scenarios.

Three-Dimensional Cell Cultures as an In Vitro Tool for Prostate Cancer Modeling and Drug Discovery

In the last decade, three-dimensional (3D) cell culture technology has gained a lot of interest due to its ability to better recapitulate the in vivo organization and microenvironment of in vitro cultured cancer cells. In particular, 3D tumor models have demonstrated several different characteristics compared with traditional two-dimensional (2D) cultures and have provided an interesting link between the latter and animal experiments. Indeed, 3D cell cultures represent a useful platform for the identification of the biological features of cancer cells as well as for the screening of novel antitumor agents. The present review is aimed at summarizing the most common 3D cell culture methods and applications, with a focus on prostate cancer modeling and drug discovery.

Microencapsulated islet-like microtissues with toroid geometry for enhanced cellular viability

Transplantation of immuno-isolated islets is a promising strategy to restore insulin-secreting function in patients with Type 1 diabetes. However, the clinical translation of this treatment approach remains elusive due to the loss of islet viability resulting from hypoxia at the avascular transplantation site. To address this challenge, we designed non-spherical islet-like microtissues and investigated the effect of their geometries on cellular viability. Insulin-secreting microtissues with different shapes were fabricated by assembly of monodispersed rat insulinoma beta cells on micromolded nonadhesive hydrogels. Our study quantitatively demonstrated that toroid microtissues exhibited enhanced cellular viability and metabolic activity compared to rod and spheroid microtissues with the same volume. At a similar level of cellular viability, toroid geometry facilitated efficient packing of more cells into each microtissue than rod and spheroid geometries. In addition, toroid microtissues maintained the characteristic glucose-responsive insulin secretion of rat insulinoma beta cells. Furthermore, toroid microtissues preserved their geometry and structural integrity following their microencapsulation in immuno-isolatory alginate hydrogel. Our study suggests that adopting toroid geometry in designing therapeutic microtissues potentially reduces mass loss of cellular grafts and thereby may improve the performance of transplanted islets towards a clinically viable cure for Type 1 diabetes. STATEMENT OF SIGNIFICANCE: Transplantation of therapeutic cells is a promising strategy for the treatment of a wide range of hormone or protein-deficiency diseases. However, the clinical application of this approach is hindered by the loss of cell viability and function at the avascular transplantation site. To address this challenge, we fabricated hydrogel-encapsulated islet-like microtissues with non-spheroidal geometry and optimal surface-to-volume ratio. This study demonstrated that the viability of therapeutic cells can be significantly increased solely by redesigning the microtissue configuration without requiring any additional biochemical or operational accessories. This study suggests that the adoption of toroid geometry provides a possible avenue to improve the long-term survival of transplanted therapeutic cells and expedite the translation of cell-based therapy towards clinical application.

Contraction Dynamics of Rod Microtissues of Gingiva-Derived and Periodontal Ligament-Derived Cells

Tissue engineering strategies using microtissues as "building blocks" have high potential in regenerative medicine. Cognition of contraction dynamics involved in the in vitro self-assembly of these microtissues can be conceived as the bedrock of an effective periodontal tissue regenerative therapy. Our study was directed at evaluating the shrinkage in the rod-shaped structure of a directed self-assembly of human gingiva-derived cells (GC) and periodontal ligament-derived cells (PDLC) and developing insights into the potential mechanisms responsible for the shrinkage. GC and PDLC were seeded in non-adherent agarose molds to form rod microtissues. Cells used for the experiments were characterized using fluorescence-activated cell sorting (FACS). To assess the viability, resazurin-based cytotoxicity assays, trypan blue dye exclusion assay, MTT and live/dead staining, and histological evaluation of rods based on hematoxylin and eosin staining were performed. Rod contraction was evaluated and measured at 0, 2, 6, and 24 h and compared to L-929 cells. The role of transforming growth factor (TGF)-β signaling, phosphoinositide 3-kinase (PI3K)/AKT, and mitogen activated protein kinase (MAPK) signaling was analyzed. Our results show that the rod microtissues were vital after 24 h. A reduction in the length of rods was seen in the 24 h period. While the recombinant TGF-β slightly reduced contraction, inhibition of TGF-β signaling did not interfere with the contraction of the rods. Interestingly, inhibition of phosphoinositide 3-kinase by LY294002 significantly delayed contraction in GC and PDLC rods. Overall, GC and PDLC have the ability to form rod microtissues which contract over time. Thus, approaches for application of these structures as "building blocks" for periodontal tissue regeneration should consider that rods have the capacity to contract substantially. Further investigation will be needed to unravel the mechanisms behind the dynamics of contraction.

Lateral assembly of N-cadherin drives tissue integrity by stabilizing adherens junctions

Cadherin interactions ensure the correct registry and anchorage of cells during tissue formation. Along the plasma membrane, cadherins form inter-junctional lattices via cis- and trans-dimerization. While structural studies have provided models for cadherin interactions, the molecular nature of cadherin binding in vivo remains unexplored. We undertook a multi-disciplinary approach combining live cell imaging of three-dimensional cell assemblies (spheroids) with a computational model to study the dynamics of N-cadherin interactions. Using a loss-of-function strategy, we demonstrate that each N-cadherin interface plays a distinct role in spheroid formation. We found that cis-dimerization is not a prerequisite for trans-interactions, but rather modulates trans-interfaces to ensure tissue stability. Using a model of N-cadherin junction dynamics, we show that the absence of cis-interactions results in low junction stability and loss of tissue integrity. By quantifying the binding and unbinding dynamics of the N-cadherin binding interfaces, we determined that mutating either interface results in a 10-fold increase in the dissociation constant. These findings provide new quantitative information on the steps driving cadherin intercellular adhesion and demonstrate the role of cis-interactions in junction stability.

Predictive models of diffusive nanoparticle transport in 3-dimensional tumor cell spheroids

The rapidly evolving nanotechnology field highlights the need of better understanding the relationship between nanoparticle (NP) properties and NP transport in solid tumors. The present study tested the hypothesis that the diffusive transport and spatial distribution of NP can be predicted based on the following parameters: interstitial NP diffusivity, NP-cell interaction parameters (cell surface binding capacity, rate constants of association, dissociation, and internalization). We (a) established the models and equations; (b) experimentally measured, in monolayer pharynx FaDu cells, the model parameters for three NP formulations (negatively charged polystyrene beads, near-neutral liposomes, and positively charged liposomes, with respective diameter of 20, 110, and 130 nm); and (c) used the models and parameters to simulate NP diffusion in 3-dimensional (3D) systems. We next measured the NP concentration-depth profiles in tumor cell spheroids, an avascular 3D system, and found good agreement between model-simulated and experimental data in spheroids for the negative and neutral NP (>90% predicted data points at three NP concentrations and three treatment times were within the 95% confidence intervals of experimental data). Model performance was inferior for positive liposomes containing a fusogenic lipid. The present study demonstrated the possibility of using in vitro NP-cell biointerface data in monolayer cultures with in silico studies to predict the NP diffusive transport and concentration-time-depth profiles in 3D systems, as functions of NP concentrations and treatment times. Extending this approach to include convective transport may yield a cost-effective means to predict the NP delivery and residence in solid tumors.

Advances in the formation, use and understanding of multi-cellular spheroids

INTRODUCTION

Developing in vitro models for studying cell biology and cell physiology is of great importance to the fields of biotechnology, cancer research, drug discovery, toxicity testing, as well as the emerging fields of tissue engineering and regenerative medicine. Traditional two-dimensional (2D) methods of mammalian cell culture have several limitations and it is increasingly recognized that cells grown in a three-dimensional (3D) environment more closely represent normal cellular function due to the increased cell-to-cell interactions, and by mimicking the in vivo architecture of natural organs and tissues.

AREAS COVERED

In this review, we discuss the methods to form 3D multi-cellular spheroids, the advantages and limitations of these methods, and assays used to characterize the function of spheroids. The use of spheroids has led to many advances in basic cell sciences, including understanding cancer cell interactions, creating models for drug discovery and cancer metastasis, and they are being investigated as basic units for engineering tissue constructs. As so, this review will focus on contributions made to each of these fields using spheroid models.

EXPERT OPINION

Multi-cellular spheroids are rich in biological content and mimic better the in vivo environment than 2D cell culture. New technologies to form and analyze spheroids are rapidly increasing their adoption and expanding their applications.

A multicellular spheroid formation and extraction chip using removable cell trapping barriers

This paper presents a multicellular spheroid chip capable of forming and extracting three-dimensional (3D) spheroids using removable cell trapping barriers. Compared to the conventional macro-scale spheroid formation methods, including spinning, hanging-drop, and liquid-overlay methods, the recent micro-scale spheroid chips have the advantage of forming smaller spheroids with better uniformity. The recent micro spheroid chips, however, have difficulties in extracting the spheroids due to fixed cell trapping barriers. The present spheroid chip, having two PDMS layers, uses removable cell trapping barriers, thereby making it easy to form and extract uniform and small-sized spheroids. We have designed, fabricated and characterized a 4 × 1 spheroid chip, where membrane cell trapping barriers are inflated at a pressure of 50 kPa for spheroid formation and are deflated at zero gauge pressure for simple and safe extraction of the spheroids formed. In this experimental study, the cell suspension of non-small lung cancer cells, H1650, is supplied to the fabricated spheroid chip in the pressure range 145-155 Pa. The fabricated spheroid chips collect the cancer cells in the cell trapping regions from the cell suspension at a concentration of 2 × 10(6) ml(-1), thus forming uniform 3D spheroids with a diameter of 197.2 ± 11.7 μm, after 24 h incubation at 5% CO(2) and 37°C environment. After the removal of the cell trapping barriers, the spheroids formed were extracted through the outlet ports at a cell inlet pressure of 5 kPa. The cells in the extracted spheroids showed a viability of 80.3 ± 7.7%. The present spheroid chip offers a simple and effective method of obtaining uniform and small-sized 3D spheroids for the next stage of cell-based biomedical research, such as gene expression analysis and spheroid inoculation in animal models.

Carcinoma-associated fibroblasts promoted tumor spheroid invasion on a microfluidic 3D co-culture device

Carcinoma-associated fibroblasts (CAFs) are a key determinant in malignant progression of cancer and represent an important target for cancer therapies. In this work, we present a microfluidic-based 3D co-culture device to reconstruct an in vitro tumor microenvironment and firstly investigate the effect of CAFs on cancer cell invasion in 3D matrix. This device is composed of six co-culture units, which enable parallel co-culture assays to be run in the presence of 3D extracellular matrix. Salivary gland adenoid cystic carcinoma (ACC) cells and CAFs embedded in matrix were co-cultured without direct contact on the device. Communication between ACC cells and CAFs could be established via medium diffused in matrix. It was observed that CAFs promoted ACC cell invasion in 3D matrix in a spheroid fashion, indicating that CAFs play a critical role in cancer invasion. We further demonstrated the effect of MMP inhibitor as an agent against CAF-promoted cancer invasion. This co-culture device reproducibly reflected the in vivo growth and invasion pattern of ACC and recreated the stroma-regulated ACC invasion. Thus, it provides a suitable platform for elucidating the mechanism of CAF-regulated cancer invasion and discovering anti-invasion drugs in a well defined 3D environment.

Tissue engineering of cementum/periodontal-ligament complex using a novel three-dimensional pellet cultivation system for human periodontal ligament stem cells

Limitations of conventional regeneration modalities underscore the necessity of recapitulating development for periodontal tissue engineering. In this study, we proposed a novel three-dimensional pellet cultivation system for periodontal ligament stem cells (PDLSCs) to recreate the biological microenvironment similar to those of a regenerative milieu. Monodispersed human PDLSCs were cultured in medium with ascorbic acid and conditioned medium from developing apical tooth germ cells and were subsequently harvested from culture plate as a contiguous cell sheet with abundant extracellular matrix. The detached cell-matrix membrane spontaneously contracted to produce a single-cell pellet. The PDLSCs embedded within this cell-matrix complex exhibited several phenotypic characteristics of cementoblast lineages, as indicated by upregulated alkaline phosphatase activity, accelerated mineralization, and the expression of bone sialoprotein and osteocalcin genes. When this PDLSC pellets were transplanted into immunocompromised mice, a regular aligned cementum/PDL-like complex was formed. These results suggest that the combination of apical tooth germ cell-conditioned medium and endogenous extracellular matrix could maximally mimic the microenvironment of root/periodontal tissue development and enhance the reconstruction of physiological architecture of a cementum/PDL-like complex in a tissue-mimicking way; on the other hand, such PDLSC pellet may also be a promising alternative to promote periodontal defect repair for future clinical applications.

Controlled embryoid body formation via surface modification and avidin-biotin cross-linking

Cell-cell interaction is an integral part of embryoid body (EB) formation controlling 3D aggregation. Manipulation of embryonic stem (ES) cell interactions could provide control over EB formation. Studies have shown a direct relationship between EB formation and ES cell differentiation. We have previously described a cell surface modification and cross-linking method for influencing cell-cell interaction and formation of multicellular constructs. Here we show further characterisation of this engineered aggregation. We demonstrate that engineering accelerates ES cell aggregation, forming larger, denser and more stable EBs than control samples, with no significant decrease in constituent ES cell viability. However, extended culture >/=5 days reveals significant core necrosis creating a layered EB structure. Accelerated aggregation through engineering circumvents this problem as EB formation time is reduced. We conclude that the proposed engineering method influences initial ES cell-ES cell interactions and EB formation. This methodology could be employed to further our understanding of intrinsic EB properties and their effect on ES cell differentiation.

Multiple three-dimensional mammalian cell aggregates formed away from solid substrata in ultrasound standing waves

Single and multiple three-dimensional cell aggregates of human red blood cells (RBCs) and HepG2 cells were formed rapidly in low mega-Hertz ultrasound standing wave fields of different geometries. A single discoid aggregate was formed in a half-wavelength pathlength resonator at a cell concentration sufficient to produce a 3D structure. Multiple cell aggregates were formed on the axis of a cylindrical resonator with a plane transducer (discoid aggregates); in a resonator with a tubular transducer and in the cross-fields of plane and tubular transducers and two plane orthogonal transducers (all cylindrical aggregates). Mechanically strong RBC aggregates were obtained by crosslinking with wheat germ agglutinin (WGA, a lectin). Scanning electron microscopy showed aggregate surface porous structures when RBCs were mixed with WGA before sonication and tighter packing when ultrasonically preformed aggregates were subsequently exposed to a flow containing WGA. HepG2 cell aggregates showed strong accumulation of F-actin at sites of cell-cell contact consistent with increased mechanical stability. The aggregates had a porous surface, and yet confocal microscopy revealed a tight packing of cells in the aggregate's inner core.

Fibroblast elongation and dendritic extensions in constrained versus unconstrained microtissues

Cytoskeletal tension is fundamental to many biological processes, including germ layer sorting during embryogenesis [Krieg et al., 2008]. In vitro, such tension influences cell sorting in self-assembled, 3D microtissues and can be of sufficient magnitude to cause complex-shaped microtissue failure [Dean et al., 2007]. To examine the process of failure under cell-derived tension, we subjected normal human fibroblasts (NHFs) to directed self-assembly [Dean et al., 2007] in micro-molds designed to yield self-constraining microtissues. As cells contracted in this assay, the constrained microtissues narrowed, thinned and ultimately failed at their midpoints. By adding small numbers of GFP+ cells, changes in cell movement and morphology were assessed and compared to those of unconstrained microtissues. We found that cells formed numerous dendritic extensions within an hour of self-assembly and retracted these extensions as they elongated up to 30 times their initial diameter ( approximately 600 microm) just prior to failure. Surprisingly, significant coordination in cell motility was observed over large distances within microtissues. Pharmacologic interventions showed that failure was myosin II and Rho kinase dependent and inhibition of failure resulted in shorter cells with greater numbers of extensions. These findings further our understanding of cellular self-assembly and introduce the use of GFP+ cells with directed self-assembly as a scaffold-free analogue to fibroblast-populated collagen gels (FPCGs).

Cytoskeletal-mediated tension modulates the directed self-assembly of microtissues

The ability of cells to self-assemble into a microtissue such as a spheroid has been attributed mainly to intercellular cohesiveness achieved by the binding of surface membrane proteins such as cadherins. However, highly dynamic and complex cytoskeletal rearrangements are coordinated with these binding events and therefore are likely to participate in self-assembly. By inhibiting such cytoskeletal activity, Y-27632 has been used to prevent and treat fibrotic disease. Here, we used the Rho kinase inhibitor to investigate the role that cellular contraction plays in self-assembly. Normal human fibroblasts (NHFs), Reuber-H35 hepatoma cells (H35s), and mixes of the two (hybrid) were treated with drug during directed self-assembly of microtissues in nonadhesive, micromolded hydrogels. The kinetics of self-assembly of both constrained and unconstrained NHF microtissues were dramatically slowed by the drug, and inhibition was dose responsive and reversible. Although sorting of NHFs and H35s occurred normally in the presence of drug, Y-27632-treated NHFs sorted to the outside of a spheroid when mixed with untreated NHFs. When mixed with H35s in trough micromolds, NHFs could drive spheroid formation from the core of the hybrid microtissues even in small numbers relative to H35s (1:19). These findings demonstrate that cellular contraction controls the kinetics of self-assembly and suggests that NHFs within the core of a microtissue can transmit contractile forces through heterotypic bonds with H35s. The control of directed self-assembly using fibroblasts and contraction inhibitors may be useful for in vitro tissue engineering as well as represent an in vitro model for fibrotic disease.

Rods, tori, and honeycombs: the directed self-assembly of microtissues with prescribed microscale geometries

It is thought that, due to energy and surface area:volume minimization, the spheroid is the terminal structure of cellular self-assembly. We investigated whether self-assembly could be directed to generate complex-shaped structures. Using micromolded, nonadhesive agarose hydrogels seeded with rat hepatoma (H35s), human fibroblasts (NHFs), or their mix (1:1), we show that cells can self-assemble rods, tori, and honeycombs. We found that in trough-shaped recesses up to 2.2 mm long, H35s readily formed rod-like structures stable at 49% the recess lengths. They also formed intact tori (88%) and fully intact honeycombs structures with patent lumens (9/9) even when released from the mold. In contrast, NHFs in trough features progressed rapidly to spheroids and formed fewer stable tori (30%) and honeycombs (0/9). The 1:1 mix of cells self-assembled rapidly like NHFs but were able to form more stable structures (tori: 30%, honeycombs: 3/9). Experiments with labeled cells in tori and honeycombs revealed that cells self-segregated in these complex structures, with H35s enveloping NHFs, and that NHFs had different morphologies in taut vs. relaxed structures. These data open new possibilities for in vitro tissue models for embryo- and organogenesis study as well as for tissue engineering applications.

Nonlinear simulation of the effect of microenvironment on tumor growth

In this paper, we present and investigate a model for solid tumor growth that incorporates features of the tumor microenvironment. Using analysis and nonlinear numerical simulations, we explore the effects of the interaction between the genetic characteristics of the tumor and the tumor microenvironment on the resulting tumor progression and morphology. We find that the range of morphological responses can be placed in three categories that depend primarily upon the tumor microenvironment: tissue invasion via fragmentation due to a hypoxic microenvironment; fingering, invasive growth into nutrient rich, biomechanically unresponsive tissue; and compact growth into nutrient rich, biomechanically responsive tissue. We found that the qualitative behavior of the tumor morphologies was similar across a broad range of parameters that govern the tumor genetic characteristics. Our findings demonstrate the importance of the impact of microenvironment on tumor growth and morphology and have important implications for cancer therapy. In particular, if a treatment impairs nutrient transport in the external tissue (e.g., by anti-angiogenic therapy) increased tumor fragmentation may result, and therapy-induced changes to the biomechanical properties of the tumor or the microenvironment (e.g., anti-invasion therapy) may push the tumor in or out of the invasive fingering regime.

An integrated computational/experimental model of tumor invasion

The intracellular and extracellular dynamics that govern tumor growth and invasiveness in vivo remain poorly understood. Cell genotype and phenotype, and nutrient, oxygen, and growth factor concentrations are key variables. In previous work, using a reaction-diffusion mathematical model based on variables that directly describe tumor cell cycle and biology, we formulated the hypothesis that tumor morphology is determined by the competition between heterogeneous cell proliferation caused by spatial diffusion gradients, e.g., of cell nutrients, driving shape instability and invasive tumor morphologies, and stabilizing mechanical forces, e.g., cell-to-cell and cell-to-matrix adhesion. To test this hypothesis, we here obtain variable-based statistics for input to the mathematical model from in vitro human and rat glioblastoma cultures. A linear stability analysis of the model predicts that glioma spheroid morphology is marginally stable. In agreement with this prediction, for a range of variable values, unbounded growth of the tumor mass and invasion of the environment are observed in vitro. The mechanism of invasion is recursive subspheroid component development at the tumor viable rim and separation from the parent spheroid. Results of computer simulations of the mathematical model closely resemble the morphologies and spatial arrangement of tumor cells from the in vitro model. We propose that tumor morphogenesis in vivo may be a function of marginally stable environmental conditions caused by spatial variations in cell nutrients, oxygen, and growth factors, and that controlling these conditions by decreasing spatial gradients could benefit treatment outcomes, whereas current treatment, and especially antiangiogenic therapy, may trigger spatial heterogeneity (e.g., local hypoxia), thus causing invasive instability.

Dynamic analysis of hepatoma spheroid formation: roles of E-cadherin and β1-integrin

A spheroid is an in vitro multicellular aggregate that provides a microenvironment resembling that of normal tissue in vivo. Although cell adhesion molecules such as integrins and cadherins have been implicated in participating in the process of spheroid formation, little is known about the timing of their action. In this study, we have employed an image-based quantitative method to investigate the compactness of cell aggregates during hepatoma spheroid formation in a dynamic fashion. By modulating beta1-integrin and E-cadherin activity with specific blocking antibodies, ion chelators, and RGD-sequence-containing peptides, we show that these cell adhesion molecules mediate the formation of spheroids through the establishment of complex cell-cell and cell-extracellular matrix (ECM) interactions. The dynamics of spheroid formation can be separated into three stages. In the first stage, ECM fibers act as a long-chain linker for the attachment of dispersed single-cells to form loose aggregations through the binding of integrins. This is followed by a delay period in which cell aggregates pause in compaction, presumably because of the accumulation of sufficient amounts of E-cadherins. In the third stage, strong homophilic interaction of E-cadherins is a major factor for the morphological transition from loose cell aggregates to compact spheroids. These findings thus provide comprehensive information on the molecular mechanisms and dynamics of hepatoma spheroid formation.

Predicting aggregation kinetics of DU 145 prostate cancer cells in liquid-overlay culture

The predictive capacity of a novel population-balance model to simulate aggregation kinetics of attachment-dependent cells at the resolution of one-cell increments has been evaluated. Using spheroid assembly of DU 145 human prostate cancer cells as a representative system, the mathematical model proved to be robust in simulating aggregation over a 5-fold range of surface densities from 5 x 10(3) to 2.5 x 10(4) cells/cm(2) with a single matrix of rate constants. For cultures at 1 x 10(5) cells/cm(2), more than 75% of simulated aggregate concentrations are within the standard deviation of measured concentrations. For the two extreme densities, at least two-thirds of model predictions are within 35% of the mean for experimental data. Error in model predictions is attributed to uncertainty in measurements and intrinsic changes in aggregation. The model has application to the rational design of spheroids in tissue engineering and bioseparation processes in pharmaceutical manufacturing.

Restructuring dynamics of DU 145 and LNCaP prostate cancer spheroids

Neoplastic cells acquire multidrug resistance as they assemble into multicellular spheroids. Image analysis and Monte Carlo simulation provided an insight into the adhesion and motility events during spheroid restructuring in liquid-overlay culture of DU 145 and LNCaP human prostate cancer cells. Irregularly shaped, two-dimensional aggregates restructured through incremental cell movements into three-dimensional spheroids. Of the two cultures examined, restructuring was more pronounced for DU 145 aggregates. Motile DU 145 cells formed spheroids with a minimum cell overlay of 30% for 25-mers as estimated by simulation versus 5% for adhesive LNCaP cells in aggregates of the same size. Over 72 h, the texture ratio increased from 0.55 +/- 0.05 for DU 145 aggregates with projected areas exceeding 2000 microm2 to a value approaching 0.75 +/- 0.02 (P < 0.05). For LNCaP aggregates of comparable size, the increase in texture ratio was more modest, less than 15% during the same time period (P < 0.05). Combined, these data suggest that motility events govern the overall rate of spheroid restructuring. This information has application to the chemosensitization of solid tumors and kinetic modeling of spheroid production.

The role of heat shock protein 70 in the thermoresistance of prostate cancer cell line spheroids

Heat shock protein 70 (Hsp70), a protein induced in cells exposed to sublethal heat shock, is present in all living cells and has been highly conserved during evolution. The aim of the current study was to determine the role of heat shock proteins in the resistance of prostate carcinoma cell line spheroids to hyperthermia. In vitro, the expression of Hsp70 by the DU 145 cell line, when cultured as monolayer or multicellular spheroids, was studied using Western blotting and enzyme-linked immunosorbent assay methods. The level of Hsp70 in spheroid cultures for up to 26 days at 37 degrees C remained similar to monolayer cultures. However, in samples treated with hyperthermia at 43 degrees C for 120 min, the spheroid cultures expressed a higher level of Hsp70 as compared to monolayer culture. Under similar conditions of heat treatment, the spheroids showed more heat resistance than monolayer cultures as judged by the number of colonies that they formed in suspension cultures. The results suggest that cells cultured in multicellular spheroids showed more heat resistance as compared to monolayer cultures by producing higher levels of Hsp70.

Aggregation kinetics of well and poorly differentiated human prostate cancer cells

Aggregation of attachment-dependent animal cells represents a series of motility, collision, and adhesion events applicable to such diverse fields as tissue engineering, bioseparations, and drug testing. Aggregation of human prostate cancer cells in liquid-overlay culture was modeled using Smoluchowski's collision theory. Using well (LNCaP) and poorly differentiated (DU 145 and PC 3) cell lines, the biological relevance of the model was assessed by comparing aggregation rates with diffusive and adhesive properties. Diffusion coefficients ranged from 5 to 90 microm(2)/min for single LNCaP and PC 3 cells, respectively. Similar diffusivities were predicted by the persistent random walk model and Einstein relation, indicating random motion. LNCaP cells were the most adhesive in our study with reduced cell shedding, 100% adhesion probability, and enhanced expression of E-cadherin. There was an increase in DU 145 cells staining positive for E-cadherin from nearly 20% of single cells to uniform staining across the surface of all aggregates; under 30% of PC 3 aggregates stained positive. Aggregation rates were more consistent with adhesive properties than with motilities, suggesting that aggregation in our study was reaction-controlled. Relative to other assays employed here, aggregation rates were more sensitive to phenotypic differences in cell lines and described size-dependent changes in aggregation at a finer resolution. In particular, model results suggest similar aggregation rates for two-dimensional DU 145 and PC 3 aggregates and upwards of 4-fold higher rates for larger three-dimensional DU 145 spheroids, consistent with expression of E-cadherin. The kinetic model has application to spheroid production, to cell flocculation and as an adhesion assay.

Differentiation kinetics of in vitro 3T3-L1 preadipocyte cultures

Engineering autologous adipose constructs from cell culture is a promising strategy to overcome limitations of conventional soft-tissue implants. A methodology is presented to experimentally determine and mathematically model the differentiation kinetics of in vitro 3T3-L1 preadipocyte cultures that can aid in construct design. Relative rates of morphological and interfacial events during adipogenesis were compared. Model results suggest that maturation of an intermediate multilocular phenotype was the rate-limiting step in morphological differentiation and had an intrinsic rate of 0.012 day(-1). Dislodgment of multilocular fat cells was the primary mechanism of cell loss during adipogenesis. The maximum rate of lipid droplet nucleation was predicted to precede that of coalescence by 10 days and to be three times faster. Coalescence probability was estimated to decrease from 33 to 11% for 4- and 8-microm-diameter droplets, respectively. Fluid drainage and the cytoskeleton between droplets could have impeded coalescence. The kinetic analysis suggests that droplet ripening was the dominant mechanism of lipid production. Applications of this research include engineering of an adipose construct and predicting surgical outcome of patients requiring soft-tissue augmentation.