Hierachically nanostructured mesoporous spheres of calcium silicate hydrate: surfactant-free sonochemical synthesis and drug-delivery system with ultrahigh drug-loading capacity

A biodegradable calcium sulfite nanoreactor for pH triggered gas therapy in combination with chemotherapy

As a gasotransmitter, endogenous sulfur dioxide (SO2) plays an important role in cardiovascular regulation. In addition, excessive SO2 can react with overexpressed hydrogen peroxide (H2O2) in tumor cells to generate toxic radicals, which can induce severe oxidative damage to tumor cells and result in cell apoptosis. This highlights the potential of SO2 in oncotherapy. However, the limited availability of endogenous H2O2 and uncontrolled release of SO2 gas significantly impede the effectiveness of SO2 gas therapy. To address this challenge, a biodegradable calcium sulfite (CS) nanocarrier loaded with 10-hydroxycamptothecin (HCPT) was developed for tumor pH-triggered SO2 gas therapy in combination with chemotherapy. This nanoreactor could be degraded in an acidic tumor microenvironment to release SO2 gas and the HCPT drug. The released SO2 gas induced serious oxidative damage to tumor cells by depleting glutathione (GSH) and generating toxic radicals through a reaction with intracellular H2O2. Simultaneously, the HCPT drug promoted tumor cell apoptosis through chemotherapy and boosted SO2 gas therapy by elevating the H2O2 level within the tumor cells. Consequently, the combination of SO2 gas therapy and chemotherapy provided a promising approach for effective tumor treatment.

Lightweight Calcium-Silicate-Hydrate Nacre with High Strength and High Toughness

Low flexural strength and toughness have posed enduring challenges to cementitious materials. As the main hydration product of cement, calcium silicate hydrate (C-S-H) plays important roles in the mechanical performance of cementitious materials while exhibiting random microstructures with pores and defects, which hinder mechanical enhancement. Inspired by the "brick-and-mortar" microstructure of natural nacre, this paper presents a method combining freeze casting, freeze-drying, in situ polymerization, and hot pressing to fabricate C-S-H nacre with high flexural strength, high toughness, and lightweight. Poly(acrylamide-co-acrylic acid) was used to disperse C-S-H and toughen C-S-H building blocks, which function as "bricks", while poly(methyl methacrylate) was impregnated as "mortar". The flexural strength, toughness, and density of C-S-H nacre reached 124 MPa, 5173 kJ/m3, and 0.98 g/cm3, respectively. The flexural strength and toughness of the C-S-H nacre are 18 and 1230 times higher than those of cement paste, respectively, with a 60% reduction in density, outperforming existing cementitious materials and natural nacre. This research establishes the relationship between material composition, fabrication process, microstructure, and mechanical performance, facilitating the design of high-performance C-S-H-based and cement-based composites for scalable engineering applications.

Europium-Doped Calcium Silicate Nanoparticles as High-Quantum-Yield Red-Emitting Phosphors

Europium ion-activated calcium silicate phosphors (Ca2SiO4:Eu3+) with sharp red-light emission were fabricated via the hydrothermal method. The size of Ca2SiO4:Eu3+ phosphors was controlled between 20 and 200 nm by precursor silicate particle sizes. Systematic studies to determine morphology, crystal phase, and photoluminescence (PL) were carried out for all the phosphors, and their optical efficiencies were compared. We found that the luminescence intensity and emission wavelength of Ca2SiO4:Eu3+ phosphors depend on their particle sizes. Particularly, the Ca2SiO4:Eu3+ synthesized with 20 nm silica seed contains the most intense red emission, high color purity, and high PL quantum yield. For the 20 nm-sized Ca2SiO4:Eu3+ phosphor, PL quantum yields are measured to be above 87.95% and high color purity of 99.8%. The unusually high intensity of 5D0 → 7F4 emission (712 nm) is explained by structural distortion arising from silicate particle size reductions. We show that the obtained phosphor is a suitable candidate for solid-state lighting as a red component through CIE chromaticity coordinate and color purity measurements. Furthermore, the Ca2SiO4:Eu3+ particles are examined for their validity as promising bio-imaging probes through cell labeling and imaging experiments and biodegradability studies.

Ultra-purification of heavy metals and robustness of calcium silicate hydrate (C-S-H) nanocomposites

For the sake of remediating the contamination of heavy metal ions (HMs) that poses high risk to the global environment, a novel inorganic nanocomposite with excellent robustness, calcium silicate hydrate (C-S-H), is synthesized at extremely low cost yet presents rapid adsorption rate and superhigh adsorption capacity. High concentrations of Cu(Ⅱ), Cd(Ⅱ), Co(Ⅱ) and Cr(Ⅲ) in wastewater can be purified to ultra-low level (∼0.008 mg L^-1) within 60 min at low C-S-H dosage, the concentration and pH indexes of which meet the standard for direct discharge in China. The adsorption processes are spontaneous, following the Langmuir adsorption isotherm model, and its kinetics conforms to pseudo-second order model. Meanwhile, C-S-H presents excellent anti-interference performance during the ultra-purification of HMs when exposed to the acid environments, solutions with various HMs as well as high salinity. The ultra-purification of HMs and robustness of C-S-H is realized through multiple mechanisms based on adsorption, involving hydrolysis of HMs, electrostatic interaction, chemical microprecipitation, surface complexation and interlayer complexation, among which interlayer complexation is dominant. All these verify the robust performance and broad applicability of C-S-H to complex aqueous systems.

Trends of calcium silicate biomaterials in medical research and applications: A bibliometric analysis from 1990 to 2020

Background: Calcium silicate biomaterials (CSB) have witnessed rapid development in the past 30 years. This study aimed to accomplish a comprehensive bibliometric analysis of the published research literature on CSB for biomedical applications and explore the research hotspot and current status.

Methods: Articles related to CSB published in the last three decades (1990–2020) were retrieved from Web of Science Core Collection. The R bibliometrix package and VOSviewer were used to construct publication outputs and collaborative networking among authors, their institutes, countries, journals’ matrices and keywords plus.

Results: A total of 872 publications fulfilling the search criteria were included. CSB is mainly reported for bone tissues and dental applications. Among researchers, Chang J from Chinese Academy of Sciences and Gandolfi MG from the University of Bologna are the most productive author in these two fields, respectively. China was the leading contributor to the research on CSB in the medical field. A total of 130 keywords appeared more ten or more times were identified. The term “mineral trioxide aggregate” ranked first with 268 occurrences. The co-occurrence analysis identified three major clusters: CSB in dentistry, bone tissue and vitro bioactivity.

Conclusion: Calcium silicate biomaterials have a promising scope for various biomedical applications ranging from regeneration of hard tissues (bone and teeth) to skin, tumor, cardiac muscle and other soft tissues. This study may help researchers further understand the frontiers of the field.

Biomineralization of bone tissue: calcium phosphate-based inorganics in collagen fibrillar organic matrices

BACKGROUND

Bone regeneration research is currently ongoing in the scientific community. Materials approved for clinical use, and applied to patients, have been developed and produced. However, rather than directly affecting bone regeneration, these materials support bone induction, which regenerates bone. Therefore, the research community is still researching bone tissue regeneration. In the papers published so far, it is hard to find an improvement in the theory of bone regeneration. This review discusses the relationship between the existing theories on hard tissue growth and regeneration and the biomaterials developed so far for this purpose and future research directions.

MAINBODY

Highly complex nucleation and crystallization in hard tissue involves the coordinated action of ions and/or molecules that can produce different organic and inorganic composite biomaterials. In addition, the healing of bone defects is also affected by the dynamic conditions of ions and nutrients in the bone regeneration process. Inorganics in the human body, especially calcium- and/or phosphorus-based materials, play an important role in hard tissues. Inorganic crystal growth is important for treating or remodeling the bone matrix. Biomaterials used in bone tissue regeneration require expertise in various fields of the scientific community. Chemical knowledge is indispensable for interpreting the relationship between biological factors and their formation. In addition, sources of energy for the nucleation and crystallization processes of such chemical bonds and minerals that make up the bone tissue must be considered. However, the exact mechanism for this process has not yet been elucidated. Therefore, a convergence of broader scientific fields such as chemistry, materials, and biology is urgently needed to induce a distinct bone tissue regeneration mechanism.

CONCLUSION

This review provides an overview of calcium- and/or phosphorus-based inorganic properties and processes combined with organics that can be regarded as matrices of these minerals, namely collagen molecules and collagen fibrils. Furthermore, we discuss how this strategy can be applied to future bone tissue regenerative medicine in combination with other academic perspectives.

Municipal Solid Waste Incineration Ash-Incorporated Concrete: One Step towards Environmental Justice

Municipal solid waste and cement manufacture are two sources of environmental justice issues in urban and suburban areas. Waste utilization is an attractive alternative to disposal for eliminating environmental injustice, reducing potential hazards, and improving urban sustainability. The re-use and recycling of municipal solid waste incineration (MSWI) ash in the construction industry has drawn significant attention. Incorporating MSWI ash in cement and concrete production is a potential path that mitigates the environmental justice issues in waste management and the construction industry. This paper presents a critical overview of the pretreatment methods that optimize MSWI ash utilization in cement/concrete and the influences of MSWI ash on the performance of cement/concrete. This review aims to elucidate the potential advantages and limitations associated with the use of MSWI ash for producing cement clinker, alternative binder (e.g., alkali-activated material), cement substitutes, and aggregates. A brief overview of the generation and characteristics of MSWI ash is reported, accompanied by identifying opportunities for the use of MSWI ash-incorporated products in industrial-scale applications and recognizing associated environmental justice implications.

Hydroxyapatite and Silicon-Modified Hydroxyapatite as Drug Carriers for 4-Aminopyridine

Adsorption and desorption properties of nano-hydroxyapatite (HAP) and silicon-modified hydroxyapatite (Si–HAP) were investigated with 4-aminopyridine (fampridine-4AP). The novelty of this research is the investigation of the suitability of the previously mentioned carriers for drug-delivery of 4AP. UV-VIS spectrophotometric results showed that the presence of silicon in the carrier did not significantly affect its adsorption capacity. The success of the adsorption was confirmed by thermal analysis (TG/DTA), scanning electron microscopy (SEM)/energy dispersive X-ray (EDX), Fourier transform infrared (FTIR) spectroscopy, and X-ray powder diffraction (XRPD). Drug release experiments, performed in simulated body fluid (SBF), revealed a drug release from Si–HAP that was five times slower than HAP, explained by the good chemical bonding between the silanol groups of the carrier and the 4AP functional groups. The electrochemical measurements showed a value of the polarization resistance of the charge transfer (Rct) more than five times smaller in the case of Si–HAP coating loaded with 4AP, so the charge transfer process was hindered. The electrochemical impedance results revealed that electron transfer was inhibited in the presence of 4AP, in concordance with the previously mentioned strong bonds. The silicon substitution in HAP leads to good chemical bonding with the drug and a slow release, respectively.

Multi-functional silica-based mesoporous materials for simultaneous delivery of biologically active ions and therapeutic biomolecules

Mesoporous silica-based materials, especially mesoporous bioactive glasses (MBGs), are being highly considered for biomedical applications, including drug delivery and tissue engineering, not only because of their bioactivity and biocompatibility but also due to their tunable composition and potential use as drug delivery carriers owing to their controllable nanoporous structure. Numerous researches have reported that MBGs can be doped with various therapeutic ions (strontium, copper, magnesium, zinc, lithium, silver, etc.) and loaded with specific biomolecules (e.g., therapeutic drugs, antibiotics, growth factors) achieving controllable loading and release kinetics. Therefore, co-delivery of ions and biomolecules using a single MBG carrier is highly interesting as this approach provides synergistic effects toward improved therapeutic outcomes in comparison to the strategy of sole drug or ion delivery. In this review, we discuss the state-of-the-art in the field of mesoporous silica-based materials used for co-delivery of ions and therapeutic drugs with osteogenesis/cementogenesis, angiogenesis, antibacterial and anticancer properties. The analysis of the literature reveals that specially designed mesoporous nanocarriers can release multiple ions and drugs at therapeutically safe and relevant levels, achieving the desired biological effects (in vivo, in vitro) for specific biomedical applications. It is expected that this review on the ion/drug co-delivery concept using MBG carriers will shed light on the advantages of such co-delivery systems for clinical use. Areas for future research directions are identified and discussed. STATEMENT OF SIGNIFICANCE: Many studies in literature focus on the potential of single drug or ion delivery by mesoporous silica-based materials, exploiting the bioactivity, biocompatibility, tunable composition and controllable nanoporosity of these materials. Recenlty, studies have adopted the "dual-delivery" concept, by designing multi-functional mesoporous silica-based systems which are capable to deliver both biologically active ions and biomolecules (growth factors, drugs) simultaneously in order to achieve synergy of their complementary therapeutic activities. This review summarizes the state of the art in the field, with focus on osteogenesis/cementogenesis, angiogenesis, antibacterial and anticancer properties, and discusses the challenges and prospects for further progress in this area, expecting to generate broader interest in the technology for applications in disease treatment and regenerative medicine.

Hollow structures as drug carriers: Recognition, response, and release

Hollow structures have demonstrated great potential in drug delivery owing to their privileged structure, such as high surface-to-volume ratio, low density, large cavities, and hierarchical pores. In this review, we provide a comprehensive overview of hollow structured materials applied in targeting recognition, smart response, and drug release, and we have addressed the possible chemical factors and reactions in these three processes. The advantages of hollow nanostructures are summarized as follows: hollow cavity contributes to large loading capacity; a tailored structure helps controllable drug release; variable compounds adapt to flexible application; surface modification facilitates smart responsive release. Especially, because the multiple physical barriers and chemical interactions can be induced by multishells, hollow multishelled structure is considered as a promising material with unique loading and releasing properties. Finally, we conclude this review with some perspectives on the future research and development of the hollow structures as drug carriers.

Enhancing Clinical Translation of Cancer Using Nanoinformatics

Application of drugs in high doses has been required due to the limitations of no specificity, short circulation half-lives, as well as low bioavailability and solubility. Higher toxicity is the result of high dosage administration of drug molecules that increase the side effects of the drugs. Recently, nanomedicine, that is the utilization of nanotechnology in healthcare with clinical applications, has made many advancements in the areas of cancer diagnosis and therapy. To overcome the challenge of patient-specificity as well as time- and dose-dependency of drug administration, artificial intelligence (AI) can be significantly beneficial for optimization of nanomedicine and combinatorial nanotherapy. AI has become a tool for researchers to manage complicated and big data, ranging from achieving complementary results to routine statistical analyses. AI enhances the prediction precision of treatment impact in cancer patients and specify estimation outcomes. Application of AI in nanotechnology leads to a new field of study, i.e., nanoinformatics. Besides, AI can be coupled with nanorobots, as an emerging technology, to develop targeted drug delivery systems. Furthermore, by the advancements in the nanomedicine field, AI-based combination therapy can facilitate the understanding of diagnosis and therapy of the cancer patients. The main objectives of this review are to discuss the current developments, possibilities, and future visions in naoinformatics, for providing more effective treatment for cancer patients.

In vitro comparisons of microscale and nanoscale calcium silicate particles

Calcium silicate (CaSi) materials have been used for bone repair and generation due to their osteogenic properties. Tailoring the surface chemistry and structure of CaSi can enhance its clinical performance. There is no direct comparison between microscale and nanoscale CaSi particles. Therefore, this article aimed to compare and evaluate the surface chemistry, structure, and in vitro properties of microscale CaSi (μCaSi) and nanoscale CaSi (nCaSi) particles synthesized by the sol-gel method and precipitation method, respectively. As a result, the semi-crystalline μCaSi powders were assemblies of irregular microparticles containing a major β-dicalcium silicate phase, while the amorphous nCaSi powders consisted of spherical particles with a size of 100 nm. After soaking in a Tris-HCl solution, the amount of Si ions released from nCaSi was higher than that released from μCaSi, but there was no significant difference in Ca ion release between the two CaSi particles. Compared to microscale CaSi (μCaSi), nanoscale CaSi (nCaSi) significantly enhanced the growth and differentiation of human mesenchymal stem cells (hMSC) and inhibited the function of RAW 264.7 macrophages. In the case of antibacterial activity against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus), nanoscale nCaSi displayed a higher bacteriostatic ratio, a greater growth inhibition zone and more reactive oxygen species (ROS) production than microscale μCaSi. The conclusion is that nanoscale CaSi had greater antibacterial and osteogenic activity compared to microscale CaSi. Next generation CaSi-based materials with unique properties are emerging to meet specific clinical needs.

Tailored Mesoporous Inorganic Biomaterials: Assembly, Functionalization, and Drug Delivery Engineering

Infectious or immune diseases have caused serious threat to human health due to their complexity and specificity, and emerging drug delivery systems (DDSs) have evolved into the most promising therapeutic strategy for drug-targeted therapy. Various mesoporous biomaterials are exploited and applied as efficient nanocarriers to loading drugs by virtue of their large surface area, high porosity, and prominent biocompatibility. Nanosized mesoporous nanocarriers show great potential in biomedical research, and it has become the research hotspot in the interdisciplinary field. Herein, recent progress and assembly mechanisms on mesoporous inorganic biomaterials (e.g., silica, carbon, metal oxide) are summarized systematically, and typical functionalization methods (i.e., hybridization, polymerization, and doping) for nanocarriers are also discussed in depth. Particularly, structure-activity relationship and the effect of physicochemical parameters of mesoporous biomaterials, including morphologies (e.g., hollow, core-shell), pore textures (e.g., pore size, pore volume), and surface features (e.g., roughness and hydrophilic/hydrophobic) in DDS application are overviewed and elucidated in detail. As one of the important development directions, advanced stimuli-responsive DDSs (e.g., pH, temperature, redox, ultrasound, light, magnetic field) are highlighted. Finally, the prospect of mesoporous biomaterials in disease therapeutics is stated, and it will open a new spring for the development of mesoporous nanocarriers.

A nanocomposite paper comprising calcium silicate hydrate nanosheets and cellulose nanofibers for high-performance water purification

Removal of soluble organic and inorganic contaminants from wastewater to produce clean water has received much attention recently. However, the simultaneous enhancement of water permeability and removal efficiency is still a challenge for filtration membranes. Here, we present a new kind of nanocomposite paper (CSH/CNF) consisting of calcium silicate hydrate (CSH) nanosheets and cellulose nanofibers (CNFs), and demonstrate the rapid water filtration and highly efficient contaminant (e.g., dyes, proteins, and metal ions) adsorption properties. The CNFs can serve as the bridging material to connect the CSH nanosheets to form a porous network structure and vital channels in the CSH/CNF paper for rapid water transportation. The weight ratio of CSH nanosheets in the paper is up to 75–85%. The weight ratio of CSH nanosheets has a significant effect on the water permeability and removal efficiency. The water permeability of the CSH/CNF paper with 82.5 wt% CSH nanosheets reaches as high as 312.7 L m⁻² h⁻¹ bar⁻¹, which is about 14.7 times that of the CSH/CNF paper with 75 wt% CSH nanosheets. Because of the high specific surface area and abundant adsorption sites of CSH nanosheets, the CSH/CNF paper with 82.5 wt% CSH nanosheets exhibits high adsorption capacities and removal efficiencies for methyl blue (242.6 mg g⁻¹, 97.3%), bovine serum albumin (289.2 mg g⁻¹, 98.5%) and Pb²⁺ ions (366.2 mg g⁻¹, 98.2%). The CSH/CNF nanocomposite paper holds great potential for application in environmental wastewater purification.

A nanocomposite paper with high water permeability and removal efficiency was prepared for the removal of organic and inorganic contaminants by filtration.

Hierarchical porous Mg2SiO4-CoFe2O4 nanomagnetic scaffold for bone cancer therapy and regeneration: Surface modification and in vitro studies

3D multifunctional bone scaffolds have recently attracted more attention in bone tissue engineering because of addressing critical issues like bone cancer and inflammation beside bone regeneration. In this study, a 3D bone scaffold is fabricated from Mg₂SiO₄-CoFe₂O₄ nanocomposite which is synthesized via a two-step synthesis strategy and then the scaffold's surface is modified with poly-3-hydroxybutyrate (P3HB)-ordered mesoporous magnesium silicate (OMMS) composite to improve its physicochemical and biological properties. The Mg₂SiO₄-CoFe₂O₄ scaffold is fabricated through polymer sponge technique and the scaffold exhibits an interconnected porous structure in the range of 100-600 μm. The scaffold is then coated with OMMS/P3HB composite via dip coating and the physical, chemical, and biological-related properties of OMMS/P3HB composite-coated scaffold are assessed and compared to the non-coated and P3HB-coated scaffolds in vitro. It is found that, on the one hand, P3HB increases the cell attachment, proliferation, and compressive strength of the scaffold, but on the other hand, it weakens the bioactivity kinetic. Addition of OMMS to the coating composition is accompanied with significant increase in bioactivity kinetic. Besides, OMMS/P3HB composite-coated scaffold exhibits higher drug loading capacity and more controlled release manner up to 240 h than the other samples because of OMMS which has a high surface area and ordered mesoporous structure suitable for controlled release applications. The overall results indicate that OMMS/P3HB coating on Mg₂SiO₄-CoFe₂O₄ scaffold leads to a great improvement in bioactivity, drug delivery potential, compressive strength, cell viability, and proliferation. Moreover, OMMS/P3HB composite-coated scaffold has heat generation capability for hyperthermia-based bone cancer therapy and so it is suggested as a multifunctional scaffold with great potentials for bone cancer therapy and regeneration.

Mechanical Properties and Cytotoxicity of Differently Structured Nanocellulose-hydroxyapatite Based Composites for Bone Regeneration Application

The nanocomposites were prepared by synthesizing (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO)-oxidized cellulose nanofibrils (TCNFs) or cellulose nanocrystals (CNCs) with hydroxyapatite (HA) in varying composition ratios in situ. These nanocomposites were first obtained from eggshell-derived calcium and phosphate of ammonium dihydrogen orthophosphate as precursors at a stoichiometric Ca/P ratio of 1.67 with ultrasonication and compressed further by a uniaxial high-pressure technique. Different spectroscopic, microscopic, and thermogravimetric analyses were used to evaluate their structural, crystalline, and morphological properties, while their mechanical properties were assessed by an indentation method. The contents of TCNF and CNC were shown to render the formation of the HA crystallites and thus influenced strongly on the composite nanostructure and further on the mechanical properties. In this sense, the TCNF-based composites with relatively higher contents (30 and 40 wt %) of semicrystalline and flexible TCNFs resulted in smoother and more uniformly distributed HA particles with good interconnectivity, a hardness range of 550-640 MPa, a compression strength range of 110-180 MPa, an elastic modulus of ~5 GPa, and a fracture toughness value of ~6 MPa1/2 in the range of that of cortical bone. Furthermore, all the composites did not induce cytotoxicity to human bone-derived osteoblast cells but rather improved their viability, making them promising for bone tissue regeneration in load-bearing applications.

Barrera E. Development of Functionalized Carbon Nano-Onions Reinforced Zein Protein Hydrogel Interfaces for Controlled Drug Release

In the current study, poly 4-mercaptophenyl methacrylate-carbon nano-onions (PMPMA-CNOs = f-CNOs) reinforced natural protein (zein) composites (zein/f-CNOs) are fabricated using the acoustic cavitation technique. The influence of f-CNOs inclusion on the microstructural properties, morphology, mechanical, cytocompatibility, in-vitro degradation, and swelling behavior of the hydrogels are studied. The tensile results showed that zein/f-CNOs hydrogels fabricated by the acoustic cavitation system exhibited good tensile strength (90.18 MPa), compared with the hydrogels fabricated by the traditional method and only microwave radiation method. It reveals the magnitude of physisorption and degree of colloidal stability of f-CNOs within the zein matrix under acoustic cavitation conditions. The swelling behaviors of hydrogels were also tested and improved results were noticed. The cytotoxicity of hydrogels was tested with osteoblast cells. The results showed good cell viability and cell growth. To explore the efficacy of hydrogels as drug transporters, 5-fluorouracil (5-FU) release was measured under gastric and intestinal pH environment. The results showed pH-responsive sustained drug release over 15 days of study, and pH 7.4 showed a more rapid drug release than pH 2.0 and 4.5. Nonetheless, all the results suggest that zein/f-CNOs hydrogel could be a potential pH-responsive drug transporter for a colon-selective delivery system.

Highly Dispersed Ni Nanoparticles on Anhydrous Calcium Silicate (ACS) Nanosheets for Catalytic Dry Reforming of Methane: Tuning the Activity by Different Ways of Ni Introduction

Three kinds of nickel-loaded anhydrous calcium silicate nanocatalysts (ACS), including Ni-ACS-Dop, Ni-ACS-Iex and Ni-ACS-Im, were prepared by introducing Ni species through doping in the synthesis of calcium silicate hydrate (CSH) nanosheets, ion-exchange with premade CSH nanosheets and deposition on calcined ACS nanosheets, respectively. Although Ni species were introduced in different ways, all the Ni-ACS catalysts showed similar chemical compositions and microstructures, where Ni nanoparticles were highly dispersed on the ultrathin ACS nanosheets with a large surface area and good thermal stability. However, the differences in the way of Ni introduction did produce Ni with different electronic states. The Ni-ACS-Iex catalyst with "surface Ni" as a dominant form had more electrons enriched on the surface of Ni, which led to the highest activity in the dry reforming of methane (DRM) reaction among the three catalysts, whereas the Ni-ACS-Dop catalyst with "lattice Ni" as a dominant form showed an electron-deficient property and lowest activity. Different from the introduction of a more favourable nanostructure or chemical component to the catalyst system, this work controlled the chemical environment of metal precursors and created metal catalysts with a preferred surface electronic state during synthesis, which could be a new strategy to improve the catalytic activity.

Cockle Shell-Derived Calcium Carbonate (Aragonite) Nanoparticles: A Dynamite to Nanomedicine

Cockle shell is an external covering of small, salt water edible clams (Anadara granosa) that dwells in coastal area. This abundant biomaterial is hard, cheap and readily available with high content of calcium carbonate in aragonite polymorphic form. At present, cockle shell-derived calcium carbonate nanoparticles (CSCaCO3NPs) with dual applications has remarkably drawn significant attention of researchers in nanotechnology as a nanocarrier for delivery of different categories of drugs and as bone scaffold due to its beneficial potentials such as biocompatibility, osteoconductivity, pH sensitivity, slow biodegradation, hydrophilic nature and a wide safety margin. In addition, CSCaCO3NP possesses structural porosity, a large surface area and functional group endings for electrostatic ion bonds with high loading capacity. Thus, it maintains great potential in the drug delivery system and a large number of biomedical utilisations. The pioneering researchers adopted a non-hazardous top-down method for the synthesis of CSCaCO3NP with subsequent improvements that led to the better spherical diameter size obtained recently which is suitable for drug delivery. The method is therefore a simple, low cost and environmentally friendly, which involves little procedural steps without stringent temperature management and expensive hazardous chemicals or any carbonation methods. This paper presents a review on a few different types of nanoparticles with emphasis on the versatile most recent advancements and achievements on the synthesis and developments of CSCaCO3NP aragonite with its applications as a nanocarrier for drug delivery in nanomedicine.

Nanostructured Calcium-based Biomaterials and their Application in Drug Delivery

In the past several decades, various types of nanostructured biomaterials have been developed. These nanostructured biomaterials have promising applications in biomedical fields such as bone repair, tissue engineering, drug delivery, gene delivery, antibacterial agents, and bioimaging. Nanostructured biomaterials with high biocompatibility, including calcium phosphate, hydroxyapatite, and calcium silicate, are ideal candidates for drug delivery. This review article is not intended to offer a comprehensive review of the nanostructured biomaterials and their application in drug delivery but rather presents a brief summary of the recent progress in this field. Our recent endeavors in the research of nanostructured biomaterials for drug delivery are also summarized. Special attention is paid to the synthesis and properties of nanostructured biomaterials and their application in drug delivery with the use of typical examples. Finally, we discuss the problems and future perspectives of nanostructured biomaterials in the drug delivery field.

Effect of Biomolecules on the Nanostructure and Nanomechanical Property of Calcium-Silicate-Hydrate

Inspired by nature, this paper investigates the effect of biomolecules, such as amino acids and proteins, on the nanostructure and mechanical stiffness of calcium-silicate-hydrate (C-S-H). Amino acids with distinct functional groups, and proteins with different structures and compositions were used in the synthesis of the C-S-H nanocomposite. The atomic structure was examined using X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The morphology was investigated using scanning electron microscopy (SEM) and atomic force microscopy (AFM). AFM nanoindentation was used to evaluate the Young's modulus of the modified C-S-H. Positively charged, H-bond forming and hydrophobic amino acids were shown to influence the atomic structure of C-S-H. The effect of negatively charged amino acid on atomic structure was more pronounced at higher C/S ratio. A noticeable increase in silicate polymerization of C-S-H modified with proteins at high C/S ratio was observed. The microscopic examination demonstrated a globular morphology for all samples except for C-S-H modified with hemoglobin, which showed a platelet morphology. The Young's modulus of C-S-H with amino acids and proteins showed a general reduction compared to that of the control C-S-H.

Sonochemical synthesis of cellulose/hydroxyapatite nanocomposites and their application in protein adsorption

Hydroxyapatite (HA) is the main mineral constituent in the hard tissue of vertebrate, which is recognized as an important biomedical material owing to its excellent bioactivity and biocompatibility. Herein, we report a facile and green sonochemical route for the rapid synthesis of cellulose/HA nanocomposites in NaOH/urea aqueous solution. The in vitro behavior of the cellulose/HA nanocomposites was studied to evaluate the biological response of the nanocomposites following immersion in simulated body fluid for various periods (maximum of 28 days). The HA crystals formed on the surface of the nanocomposites were carbonate-containing apatite, which is similar to the naturally occurring calcium phosphate materials. The HA nanosheets (assembly of nanorods) were mineralized on the surface of the nanocomposites, and maximum mass of the nanocomposites was reached 1.82 times of initial mass after 28 days of soaking. Moreover, the as-prepared cellulose/HA nanocomposites have good cytocompatibility, and show a relatively high protein adsorption ability using hemoglobin as a model protein. These results indicate that the as-prepared cellulose/HA nanocomposites are promising for applications in various biomedical fields such as tissue engineering and protein/drug delivery.

The Adsorption Kinetic Parameters of Co2+ Ions by α-C2SH

In this work, the kinetic parameters of Co2+ ion adsorption by α-C2SH were determined. α-C2SH was synthesized under hydrothermal conditions at 175 °C, when the duration of isothermal curing was 24 h and the molar ratio of primary mixture was CaO/SiO2 = 1.5. This research allows us to state that the adsorption reactions proceed according to the chemisorption process. In order to determine adsorption kinetic parameters, kinetics models have been developed and fitted for these reactions. Additionally, it was determined that adsorbed Co2+ ions have a significant influence on the stability of α-C2SH. These results were confirmed by XRD, STA, and atomic absorption spectroscopy methods.

Calcium-based biomaterials for diagnosis, treatment, and theranostics

Calcium-based biomaterials with good biosafety and bio-absorbability are promising for biomedical applications such as diagnosis, treatment, and theranostics.

Biomimetic, Strong, Tough, and Self-Healing Composites Using Universal Sealant-Loaded, Porous Building Blocks

Many natural materials, such as nacre and dentin, exhibit multifunctional mechanical properties via structural interplay between compliant and stiff constituents arranged in a particular architecture. Herein, we present, for the first time, the bottom-up synthesis and design of strong, tough, and self-healing composite using simple but universal spherical building blocks. Our composite system is composed of calcium silicate porous nanoparticles with unprecedented monodispersity over particle size, particle shape, and pore size, which facilitate effective loading and unloading with organic sealants, resulting in 258% and 307% increases in the indentation hardness and elastic modulus of the compacted composite. Furthermore, heating the damaged composite triggers the controlled release of the nanoconfined sealant into the surrounding area, enabling moderate recovery in strength and toughness. This work paves the path towards fabricating a novel class of biomimetic composites using low-cost spherical building blocks, potentially impacting bone-tissue engineering, insulation, refractory and constructions materials, and ceramic matrix composites.

Exploration of Macroporous Polymeric Sponges As Drug Carriers

Achieving high drug loading capacity and controlling drug delivery are two main challenges related to drug carriers. In this study, polymeric macroporous sponges with very high pore volume and large porosity are introduced as a new-type of drug carrier. Due to the high pore volume (285 and 166 cm³/g for the sponges with densities of 3.5 and 6.0 mg/cm³, respectively), the sponges exhibit very high drug loading capacities with average values of 1870 ± 114 and 2697 ± 73 mg/g in the present study, which is much higher than the meso and microporous drug carriers (<1500 mg/g). In order to control the release profiles, an additional poly(p-xylylene) (PPX) coating was deposited by chemical vapor deposition on the drug loaded sponge. Consequently, Artemisone (ART) release in the aqueous medium could be retarded, depending on the density of the sponge and the thickness of the coating. In future, the new 3D polymeric sponges would be highly beneficial as drug carriers for the programmed release of drugs for treatment of chronic diseases.

High drug-loading nanomedicines: progress, current status, and prospects

Drug molecules transformed into nanoparticles or endowed with nanostructures with or without the aid of carrier materials are referred to as "nanomedicines" and can overcome some inherent drawbacks of free drugs, such as poor water solubility, high drug dosage, and short drug half-life in vivo. However, most of the existing nanomedicines possess the drawback of low drug-loading (generally less than 10%) associated with more carrier materials. For intravenous administration, the extensive use of carrier materials might cause systemic toxicity and impose an extra burden of degradation, metabolism, and excretion of the materials for patients. Therefore, on the premise of guaranteeing therapeutic effect and function, reducing or avoiding the use of carrier materials is a promising alternative approach to solve these problems. Recently, high drug-loading nanomedicines, which have a drug-loading content higher than 10%, are attracting increasing interest. According to the fabrication strategies of nanomedicines, high drug-loading nanomedicines are divided into four main classes: nanomedicines with inert porous material as carrier, nanomedicines with drug as part of carrier, carrier-free nanomedicines, and nanomedicines following niche and complex strategies. To date, most of the existing high drug-loading nanomedicines belong to the first class, and few research studies have focused on other classes. In this review, we investigate the research status of high drug-loading nanomedicines and discuss the features of their fabrication strategies and optimum proposal in detail. We also point out deficiencies and developing direction of high drug-loading nanomedicines. We envision that high drug-loading nanomedicines will occupy an important position in the field of drug-delivery systems, and hope that novel perspectives will be proposed for the development of high drug-loading nanomedicines.

Macroporous materials: microfluidic fabrication, functionalization and applications

This article provides an up-to-date highly comprehensive overview (594 references) on the state of the art of the synthesis and design of macroporous materials using microfluidics and their applications in different fields.

Synthesis and Adsorption Properties of Hierarchically Ordered Nanostructures Derived from Porous CaO Network

Using the porous framework of CaO as templates and reagents, we explored a surfactant-free and economical method for preparing calcium silicate hydrate (CSH) hierarchically ordered nanostructures. Incorporation of SiO₂ nanoparticles into the CaO framework, followed by a reaction assisted by hydrothermal treatment, resulted in the formation of CSH with well-defined morphologies. The structural features of CSH were characterized by 3-D hierarchical networks, wherein nanofibers assembled to form nanosheets, and nanosheets assembled to form hierarchically ordered structures. Investigation of the crystal growth mechanism indicated that the key to forming the CSH ordered assembly structure was confining the Ca/Si ratio within a small range. Nonclassic oriented aggregation mechanism was used to describe the crystal growth of nanosheets, while the porous CaO framework served as template/reagents responsible for the formation of hierarchical structures. The resulting CSH adsorbent exhibited better performance in removing Pb(II) compared with other types of random CSH adsorbents. Additionally, the hierarchical structure of CSH provided more pores and active sites as support for other active functional materials such as zerovalent iron (Fe⁰). As-produced CSH@Fe nanocomposite with self-supported structures displayed high capacities for removal of Pb(II) after five adsorption-desorption cycles, and high capacities for other heavy metal ions (Cu²⁺, Cd²⁺, and Cr₂O₇^2-) and organic contaminants.

Templated solvothermal synthesis of magnesium silicate hollow nanospheres with ultrahigh specific surface area and their application in high-performance protein adsorption and drug delivery

Magnesium silicate hollow nanospheres with ultrahigh protein/drug loading capacity and high anticancer activity are reported.

Sonochemical synthesis of hydroxyapatite nanoflowers using creatine phosphate disodium salt as an organic phosphorus source and their application in protein adsorption

Hydroxyapatite nanosheets-assembled nanoflowers are sonochemically synthesized using creatine phosphate, which have excellent cytocompatibility and relatively high protein adsorption ability.

Three-Dimensionally Controllable Synthesis of Multichannel Silica Nanotubes and Their Application as Dual Drug Carriers

Three-dimensionally controllable multichannel silica nanotubes (MC-SNTs) have been constructed. Quaternary ammonium type (C_n H_2n+1 (CH₃ )₃ N⁺ ) surfactants were used as structure-directing agents (SDAs) in basic ammonia. A low concentration of block copolymer HO(CH₂ CH₂ O)₂₀ [CH₂ CH(CH₃ )O]₇₀ (CH₂ CH₂ O)₂₀ H (P123) was employed as an additive. The length, diameter, and pore size of MC-SNTs can be finely controlled in the range of 50 nm to 5 μm, 50 nm to 350 nm, and 2 nm to 3 nm by changing the molar ratio of P123 and SDA, the concentration of ammonia, and the length of carbon chain of SDAs, respectively. Observations based on transmission electron microscopy confirmed the role of P123 and ammonia in the self-assembly of micelles of SDA. Compared with the one-pot method reported previously, the aspect ratios (ARs; length/diameter) of obtained MC-SNTs were tunable in a wide range of approximately 1 to 100. The tunable MC-SNTs were used as dual drug-delivery carriers for anticancer drug doxorubicin (Dox) and anti-inflammatory drug ibuprofen (Ibu). Results of release behavior and toxicity to cancer cells of Dox-Ibu-loaded MC-SNTs with different ARs revealed that Dox and Ibu were successfully codelivered and did not interfere with each other. The produced MC-SNTs with larger AR values of showed advantages in the amount of accumulated dual drugs, the duration time of release, and inhibition of the growth of HeLa cells.

Sonochemical Synthesis of Hydrophilic Drug Loaded Multifunctional Bovine Serum Albumin Nanocapsules

A facile sonochemical approach is designed to fabricate protein nanocapsules for hydrophilic drugs (HDs), and HD-loaded multifunctional bovine serum albumin (BSA) nanocapsules (MBNCs) have been prepared for the first time. The as-synthesized HD-loaded MBNCs have a satisfying size range and an excellent magnetic responsive ability. Moreover, high-dose hydrophilic drugs could be loaded into the MBNCs. As carriers, HD-loaded MBNCs also show attractive redox-responsive controlled release ability for hydrophilic drugs and could be internalized selectively by the tumor cells through the folate-mediated endocytosis.

Ultrasonically Assisted Polysaccharide Microcontainers for Delivery of Lipophilic Antitumor Drugs: Preparation and in Vitro Evaluation

High toxicity, poor selectivity, and severe side effects are major drawbacks of anticancer drugs. Various drug delivery systems could be proposed to overcome these limitations. The aim of this study was to fabricate polysaccharide microcontainers (MCs) loaded with thymoquinone (TQ) by a one-step ultrasonication technique and to study their cellular uptake and cytotoxicity in vitro. Two MC fractions with a mean size of 500 nm (MC-0.5) and 2 μM (MC-2) were prepared and characterized. Uptake of the MCs by mouse melanoma M-3 cells was evaluated in both 2D (monolayer culture) and 3D (multicellular tumor spheroids) models by confocal microscopy, flow cytometry, and fluorimetry. The higher cytotoxicity of the TQ-MC-0.5 sample than the TQ-MC-2 fraction was in good correlation with higher MC-0.5 accumulation in the cells. The MC-0.5 beads were more promising than the MC-2 particles because of a higher cellular uptake in both 2D and 3D models, an enhanced antitumor effect, and a lower nonspecific toxicity.

Calcium Carbonate Nanoplate Assemblies with Directed High-Energy Facets: Additive-Free Synthesis, High Drug Loading, and Sustainable Releasing

Developing drug delivery systems (DDSs) with high drug-loading capacity and sustainable releasing is critical for long-term chemotherapeutic efficacy, and it still remains challenging. Herein, vaterite CaCO3 nanoplate assemblies with exposed high-energy {001} facets have been synthesized via a novel, additive-free strategy. The product shows a high doxorubicin-loading capacity (65%); the best of all the CaCO3-based DDSs so far. Also, the product's sustainable releasing performance and its inhibition of the initial burst release, together, endow it with long-term drug efficacy. The work may shed light on exposing directed high-energy facets for rationally designing of a drug delivery system with long-term efficacy.