Water-Dispersible Fluorescent Silicon Nanoparticles and their Optical Applications

A Dual Emission Fluorescence Probe Based on Silicon Nanoparticles and Rhodamine B for Ratiometric Detection of Kaempferol

In this paper, blue fluorescent silicon nanoparticles (SiNPs) with outstanding optical properties and robust stability were synthesized by a simple one-step hydrothermal method. By introducing red emissive rhodamine B (RhB) into SiNPs solution, a dual emission nanoprobe (SiNPs@RhB) was constructed, which showed excellent pH stability, salt resistance and photobleaching resistance. The SiNPs@RhB probe could emit two peaks at 444 nm and 583 nm under 365 nm excitation. It was found that the fluorescence intensity of the two emission peaks decreased in different degrees with the addition of different concentrations of kaempferol (Kae). According to this phenomenon, a novel ratiometric fluorescence method was established for the detection of Kae via utilizing SiNPs@RhB as nanoprobe. The detection range and limit of detection (LOD) were 0.5 ~ 150 µM and 0.24 µM, respectively. The ratiometric fluorescence method exhibited the superiority of rapid detection, excellent stability, wide linear range and high sensitivity. The detection mechanism was studied by ultraviolet visible absorption spectra, fluorescence spectra and fluorescence lifetime. Furthermore, the method was applied to the detection of Kae in real samples (kaempferia powder, sea buckthorn granules and sea buckthorn dry emulsion).

One-Pot Synthesis of Silicon Quantum Dots-Based Fluorescent Nanomaterial and Its Application

Conventionally obtained silicon quantum dots (Si QDs) generally suffer from the disadvantages of a cumbersome preparation process, large fluctuation in the quality of Si QDs, poor water solubility, and aggregation-caused quenching (ACQ) phenomenon. Here we report a facile one-pot strategy to synthesize a novel Si QDs-based fluorescent nanomaterial in which Si QDs are confined into dendritic mesoporous silica, named as SiQDs@DMSNs. The prepared SiQDs@DMSNs, with adjustable particle sizes ranging from 140 to 300 nm, emit blue fluorescence around 410 nm upon excitation by ultraviolet light at a wavelength of 300 nm. It is found that the addition of sodium salicylate (NaSAL) plays a crucial role in the in situ generation of Si QDs. The obtained SiQDs@DMSNs exhibit excellent fluorescence intensity, water solubility, and stability, facilitating easy surface modification, without being limited by the ACQ phenomenon. It is expected to be widely used in many fields such as biosensors, nanomedicines, in vivo imaging, fingerprint identification, and anticounterfeiting labels.

Advances in the application of logic gates in nanozymes

Nanozymes are a class of nanomaterials with biocatalytic function and enzyme-like activity, whose advantages include high stability, low cost, and mass production. They can catalyze the substrates of natural enzymes based on specific nanostructures and serve as substitutes for natural enzymes. Their applied research involves a wide range of fields such as biomedicine, environmental governance, agriculture, and food. Molecular logic gates are a new cross-disciplinary discipline, which can simulate the function of silicon circuits on a molecular scale, perform single or multiple input logic operations, and generate logic outputs. A molecular logic gate is a binary operation that converts an input signal into an output signal according to the rules of Boolean logic, generating two signals, a high level, and a low level. The high and low levels represent the "true" and "false" values of the logic gates, and their outputs correspond to "l" and "0" of the molecular logic gates, respectively. The combination of nanozymes and logic gates is a novel and attractive research direction, and the cross-application of the two brings new opportunities and ideas for various fields, such as the construction of efficient biocomputers, intelligent drug delivery systems, and the precise diagnosis of diseases. This review describes the application of logic gates based on nanozymes, which is expected to provide a certain theoretical foundation for researchers' subsequent studies.

Silicon-containing nanomedicine and biomaterials: materials chemistry, multi-dimensional design, and biomedical application

The invention of silica-based bioactive glass in the late 1960s has sparked significant interest in exploring a wide range of silicon-containing biomaterials from the macroscale to the nanoscale. Over the past few decades, these biomaterials have been extensively explored for their potential in diverse biomedical applications, considering their remarkable bioactivity, excellent biocompatibility, facile surface functionalization, controllable synthesis, etc. However, to expedite the clinical translation and the unexpected utilization of silicon-composed nanomedicine and biomaterials, it is highly desirable to achieve a thorough comprehension of their characteristics and biological effects from an overall perspective. In this review, we provide a comprehensive discussion on the state-of-the-art progress of silicon-composed biomaterials, including their classification, characteristics, fabrication methods, and versatile biomedical applications. Additionally, we highlight the multi-dimensional design of both pure and hybrid silicon-composed nanomedicine and biomaterials and their intrinsic biological effects and interactions with biological systems. Their extensive biomedical applications span from drug delivery and bioimaging to therapeutic interventions and regenerative medicine, showcasing the significance of their rational design and fabrication to meet specific requirements and optimize their theranostic performance. Additionally, we offer insights into the future prospects and potential challenges regarding silicon-composed nanomedicine and biomaterials. By shedding light on these exciting research advances, we aspire to foster further progress in the biomedical field and drive the development of innovative silicon-composed nanomedicine and biomaterials with transformative applications in biomedicine.

Nanomaterials for fluorescent detection of vitamin B2: A review

Vitamin B2 plays vital roles in maintaining human health. It is of tremendous significance to construct sensitive sensors of VB2. In this review, we first briefly presented the sensing mechanisms of fluorescent nanomaterials for sensing VB2. Subsequently, the advances of nanomaterials for fluorescent determination of VB2 were highlighted. And sensing performance of traditional approaches and fluorescent nanosensors was further compared. In last section, the challenges and perspectives concerning the topic were discussed.

In vivo bioluminescence imaging of natural bacteria within deep tissues via ATP-binding cassette sugar transporter

Most existing bioluminescence imaging methods can only visualize the location of engineered bacteria in vivo, generally precluding the imaging of natural bacteria. Herein, we leverage bacteria-specific ATP-binding cassette sugar transporters to internalize luciferase and luciferin by hitchhiking them on the unique carbon source of bacteria. Typically, the synthesized bioluminescent probes are made of glucose polymer (GP), luciferase, Cy5 and ICG-modified silicon nanoparticles and their substrates are made of GP and D-luciferin-modified silicon nanoparticles. Compared with bacteria with mutations in transporters, which hardly internalize the probes in vitro (i.e., ~2% of uptake rate), various bacteria could robustly engulf the probes with a high uptake rate of around 50%. Notably, the developed strategy enables ex vivo bioluminescence imaging of human vitreous containing ten species of pathogens collected from patients with bacterial endophthalmitis. By using this platform, we further differentiate bacterial and non-bacterial nephritis and colitis in mice, while their chemiluminescent counterparts are unable to distinguish them.

Emerging ultrasmall luminescent nanoprobes for in vivo bioimaging

Photoluminescence (PL) imaging has become a fundamental tool in disease diagnosis, therapeutic evaluation, and surgical navigation applications. However, it remains a big challenge to engineer nanoprobes for high-efficiency in vivo imaging and clinical translation. Recent years have witnessed increasing research efforts devoted into engineering sub-10 nm ultrasmall nanoprobes for in vivo PL imaging, which offer the advantages of efficient body clearance, desired clinical translation potential, and high imaging signal-to-noise ratio. In this review, we present a comprehensive summary and contrastive discussion of emerging ultrasmall luminescent nanoprobes towards in vivo PL bioimaging of diseases. We first summarize size-dependent nano-bio interactions and imaging features, illustrating the unique attributes and advantages/disadvantages of ultrasmall nanoprobes differentiating them from molecular and large-sized probes. We also discuss general design methodologies and PL properties of emerging ultrasmall luminescent nanoprobes, which are established based on quantum dots, metal nanoclusters, lanthanide-doped nanoparticles, and silicon nanoparticles. Then, recent advances of ultrasmall luminescent nanoprobes are highlighted by surveying their latest in vivo PL imaging applications. Finally, we discuss existing challenges in this exciting field and propose some strategies to improve in vivo PL bioimaging and further propel their clinical applications.

Recent Advances in Silicon Quantum Dot-Based Fluorescent Biosensors

With the development of nanotechnology, fluorescent silicon nanomaterials have been synthesized and applied in various areas. Among them, silicon quantum dots (SiQDs) are a new class of zero-dimensional nanomaterials with outstanding optical properties, benign biocompatibility, and ultra-small size. In recent years, SiQDs have been gradually utilized for constructing high-performance fluorescent sensors for chemical or biological analytes. Herein, we focus on reviewing recent advances in SiQD-based fluorescent biosensors from a broad perspective and discussing possible future trends. First, the representative progress for synthesizing water-soluble SiQDs in the past decade is systematically summarized. Then, the latest achievement of the design and fabrication of SiQD-based fluorescent biosensors is introduced, with a particular focus on analyte-induced photoluminescence (fluorescence) changes, hybrids of SiQDs with other materials or molecules, and biological ligand-modification methods. Finally, the current challenges and prospects of this field are highlighted.

Water-borne, durable and multicolor silicon nanoparticles/sodium alginate inks for anticounterfeiting applications

Recently, water-borne fluorescent inks have attracted extensive attention in anti-counterfeiting applications due to their convenient implementation and eco-friendliness. However, due to poor service durability, the latent authorization information from the inks is easily damaged, and even disappears when encountering water. Moreover, most of the existing fluorescent inks are monochromic, toxic, and allergic to skin, thus are unsuitable for their sustainability during real-life applications. Herein, this work presents environment-friendly, durable, and multicolor fluorescent anti-counterfeiting silicon nanoparticles (SiNPs)/sodium alginate (SA) inks. The multicolor SiNPs are synthesized by a one-pot method with defined morphologies and optical properties. Subsequently, SA is employed as the binder to prepare the fluorescent inks with optimized rheological properties. Practicability results show that the SiNPs/SA inks not only exhibit excellent printability, but also impart authentic information with superior covert performance. More notably, spraying solution of calcium dichloride can further improve fluorescent fastnesses of the SiNPs/SA inks by ionic crosslinking.

Silicon-Based Scaffold for Wound Healing Skin Regeneration Applications: A Concise Review

Silicon has made its breakthrough in various industries, including clinical and biomedical applications. Silicon-based biomaterials that were fabricated into various types of scaffolds may attract interest due to their highly favorable properties covering their excellent biocompatibility, high surface area, mechanical strength, and selectivity depending on their application including film, hydrogel, nanoparticles, and so on. Silicon-based materials have also shown exciting results involving cell culture, cell growth, as well as tissue engineering. In this article, a simple review compromising the evaluation of silicon's unique properties has been discussed and followed by the application of the silicone-based product in future perspectives in biomedical fields. The review goals are to widen and inspire broader interest in silicone-based materials in wound healing research.

Protein-Mimicking Nanoparticles in Biosystems

Proteins are essential elements for almost all life activities. The emergence of nanotechnology offers innovative strategies to create a diversity of nanoparticles (NPs) with intrinsic capacities of mimicking the functions of proteins. These artificial mimics are produced in a cost-efficient and controllable manner, with their protein-mimicking performances comparable or superior to those of natural proteins. Moreover, they can be endowed with additional functionalities that are absent in natural proteins, such as cargo loading, active targeting, membrane penetrating, and multistimuli responding. Therefore, protein-mimicking NPs have been utilized more and more often in biosystems for a wide range of applications including detection, imaging, diagnosis, and therapy. To highlight recent progress in this broad field, herein, representative protein-mimicking NPs that fall into one of the four distinct categories are summarized: mimics of enzymes (nanozymes), mimics of fluorescent proteins, NPs with high affinity binding to specific proteins or DNA sequences, and mimics of protein scaffolds. This review covers their subclassifications, characteristic features, functioning mechanisms, as well as the extensive exploitation of their great potential for biological and biomedical purposes. Finally, the challenges and prospects in future development of protein-mimicking NPs are discussed.

One-step hydrothermal synthesis of fluorescent silicon nanoparticles for sensing sulfide ions and cell imaging

We have presented a hydrothermal approach for synthesizing fluorescent silicon nanoparticles (F-SiNPs) with yellow-green emission. The obtained F-SiNPs exhibited excellent stability and good biocompatibility. By virtue of the specific reaction between S^2- and 5,5'-dithiobis-(2-nitrobenzoic acid) (DTNB), colorimetric assay of S^2- was realized with a good linear range of 0-100 μM. The colorimetric detection system could be further combined with F-SiNPs to construct a probe for fluorescence turn-off sensing S^2- in aqueous solution due to inner filter effect. In the fluorescent detection system, a good linearity with S^2- concentration in the range of 0-50 μM was accomplished. And as low as 0.1 μM S^2- was successfully detected. Moreover, the F-SiNPs displayed low cytotoxicity and good biocompatibility, and was further utilized for cell imaging. These results demonstrated the promising applications of F-SiNPs in S^2- analysis and bioimaging.

Remodeling Macrophages by an Iron Nanotrap for Tumor Growth Suppression

Tumor-associated macrophages (TAMs) that infiltrate in most tumor tissues are closely correlated with proliferation and metastasis of tumor cells. Immunomodulation of TAMs from pro-tumorigenic M2 phenotype to anti-tumorigenic M1 phenotype is crucial for oncotherapy. Herein, an iron nanotrap was utilized to remodel TAMs for tumor growth inhibition. In the formulation, the ultrasmall nanotrap could capture and targetedly transport endogenous iron into TAMs even inside the tumor. Upon exposing to the lysosomal acidic conditions and intracellular H₂O₂, iron was released from the nanotrap and produced the generation of oxidative stress, which could reprogram TAMs. The activated M1 macrophages could induce immune responses and suppress tumor growth ultimately. Meanwhile, this metal-free nanotrap with degradability by H₂O₂ possessed favorable biocompatibility. Our work would present potential opportunities of utilizing endogenous substances for secure treatment of various diseases.

Hydrothermal Synthesis of Zinc-Doped Silica Nanospheres Simultaneously Featuring Stable Fluorescence and Long-Lived Room-Temperature Phosphorescence

Fluorescence and phosphorescence are known as two kinds of fundamental optical signals, which have been used for myriad applications. To date, simultaneous activation of stable fluorescence and long-lived room-temperature phosphorescence (RTP) emission in the aqueous phase remains a big challenge. We prepare zinc-doped silica nanospheres (Zn@SiNSs) with fluorescence and RTP properties using a facile hydrothermal synthetic strategy. For the as-prepared Zn@SiNSs, the recombination of electrons and holes in defects and defect-stabilized excitons derived from oxygen vacancy/C=N bonds lead to the production of stable fluorescence and long-lived RTP (emission lasting for ≈9 s, quantum yield (QY): ≈33.6 %, RTP lifetime: ≈236 ms). The internal Si-O bonded networks and hydrophilic surface in Zn@SiNSs can reduce nonradiative decay to form self-protective RTP, and also provide high water solubility, excellent pH- and photostability.

Silicon nanoparticles-based ratiometric fluorescence platform: Real-time visual sensing to ciprofloxacin and Cu2

In this work, a silicon nanoparticles (Si NPs)-based ratiometric fluorescence sensing platform was conveniently fabricated by simply mixing fluorescent Si NPs as co-ligands and reference signal with lanthanide metal ion Eu³⁺ as response signal. The introduction of ciprofloxacin (CIP) remarkably turned on the characteristic fluorescence of Eu³⁺ at 590 nm and 619 nm through the "antenna effect". At the same time, the blue emission of Si NPs at 445 nm kept comparatively stable. A good linear relationship between the ratio fluorescence intensity and CIP concentration in the range of 0.211-132.4 μM with a limit of detection (LOD) of 89 nM was obtained. In the presence of Cu²⁺, the fluorescence emission of Eu³⁺ was sharply turned off because of the stronger coordination ability of Cu²⁺ with CIP, which guaranteed the sequential detection of Cu²⁺. Meanwhile, the distinct fluorescent color change from bright blue to red, then back to blue, enabled naked-eye visual detection of CIP and Cu²⁺ in the solution phase and on paper-based test strip, and was successfully applied to determine the levels of CIP in complicated food samples with high sensitivity.

One-pot synthesis of novel water-dispersible fluorescent silicon nanoparticles for selective Cr2O72- sensing

Chromium (Cr(vi)), a highly toxic metal-oxyanion which is carcinogenic and mutagenic to humans, is a severe environmental pollutant. Developing simple methods for sensitive and selective detection of Cr(vi) is of great significance. In this work, fluorescent silicon nanoparticles (SiNPs) with good water solubility were facilely synthesized via a one-step hydrothermal method by using (3-aminopropyl)triethoxysilane (APTES) as the silicon source and natural antioxidant quercetin as the reducing agent. The obtained SiNPs displayed good thermostability, salt-tolerance and photo-stability. The as-prepared SiNPs exhibited bright blue emission at 437 nm under excitation at 362 nm, allowing them to be developed as a fluorescent probe for detection of Cr2O72-. Significantly, the fluorescence of the SiNPs could be remarkably quenched by Cr2O72-via the internal filtering effect (IFE). Based on this phenomenon, a novel fluorescence method for detection of Cr2O72- was established. A good linear relationship was obtained from 0.5 to 100 μM with a limit of detection (based on 3 s/k, LOD) of 180 nM. The proposed fluorescence method was successfully applied to the detection of Cr2O72- in tap water. Moreover, a fluorescent filter paper sensor was developed for the visual detection of Cr2O72-, providing a valuable platform for Cr2O72- sensing in a convenient way.

Design guidelines for transition metals as interstitial emitters in silicon nanocrystals to tune photoluminescence properties: zinc as biocompatible example

Silicon nanocrystals (Si NCs) are attractive candidates for biomarkers in medical imaging. Building on recent work [McVey et al., J. Chem. Phys. Lett., 2015, 6/9, 1573; McVey et al., Nanoscale, 2018, 15600], we focus on interstitial (i-) doping of Si NCs by transition metals (TMs), and investigate the optoelectronic structure with Zn as example. Carrying out extensive ground and excited state calculations using density functional theory (DFT), we provide insight into the interdependencies of parameters which define photoluminescence (PL) properties as per TM element, their position, and their density within Si NCs of realistic size. For i-Zn in Si NCs, we predict a very high radiation efficiency with a wavelength located well above the range of auto-luminescence originating from human tissue and blood. We derive general guidelines for i-TM doping of Si NCs to arrive at a desired emission wavelength with maximum radiation efficiency. Moving on from this general description, we reveal the concept of using the plasmonic resonance of i-TM dopants in the microwave (μW) spectrum to trigger selective thermal apoptosis of tagged cells in vivo after cell marking, paving the way towards a theragnostics tool with minimum side effects.

Facile preparation of FITC-modified silicon nanodots for ratiometric pH sensing and imaging

A ratiometric fluorescent pH sensor was facilely constructed by covalent modification of amino-terminated silicon nanodots (SiND) with pH-sensitive fluorescein isothiocyanate (FITC). After optimization, the SiND-FITC(40:1) material with a SiND:FITC initial mass ratio of 40:1 was selected for the sensing of hydrogen ions. It was observed that the material inherits the unique features of SiND and FITC, and there is significant improvement of SiND acid-base stability, which is a favorable factor in terms of providing fluorescence reference signal. The SiND-FITC(40:1) material displays not only high pH sensitivity, but also good stability and anti-interference ability, and the response process is highly reversible. Deploying the SiND-FITC(40:1) material, we have made available a simple, sensitive, and precise approach for pH sensing. In aqueous solutions, the I₅₁₇/I₄₆₆ fluorescence intensity ratio of SiND-FITC(40:1) increases linearly in the pH range of 5.40-7.76. This dual emission nanosensor was successfully applied for pH sensing and cellular fluorescence imaging.

Fast room-temperature functionalization of silicon nanoparticles using alkyl silanols

We report a fast, easy and efficient method for the functionalization of hydrogen-terminated silicon nanoparticles (H-Si NPs). Using silanol compounds, a range of functionalized Si NPs could be produced in only 1 h reaction time at room temperature.

A differential study on oxidized/reduced ascorbic acid induced tumor cells’ apoptosis under hypoxia

The anticancer mechanism for reduced/oxidized ascorbic acid (AA/DHA) is of great significance for clinical cancer therapies.

Fluorescent and Mechanical Properties of Silicon Quantum Dots Modified Sodium Alginate-Carboxymethylcellulose Sodium Nanocomposite Bio-Polymer Films

Highly luminescent silicon quantum dots (SiQDs) were prepared via one-pot hydrothermal route. Furthermore, the optimal synthetic conditions, dependence of the emission spectrum on the excitation wavelength and fluorescent stability of SiQDs were investigated by fluorescence spectroscopy. SiQDs exhibited bright blue fluorescence, and photoluminescence (PL) lifetime is 10.8 ns when excited at 325 nm. The small-sized SiQDs (~3.3 nm) possessed uniform particle size, crystal lattice spacing of 0.31 nm and silicon (111), (220) crystal planes. Luminescent SiQDs/sodium alginate (SA)-carboxymethylcellulose sodium (CMC) nanocomposite bio-polymer films were successfully fabricated by incorporating SiQDs into the SA-CMC matrix. Meanwhile, SiQDs not only impart strong fluorescence to the polymer, but also make the composite films have favorable toughness.

Fluorescent Silicon Nanorods-Based Nanotheranostic Agents for Multimodal Imaging-Guided Photothermal Therapy

The utilization of diagnosis to guide/aid therapy procedures has shown great prospects in the era of personalized medicine along with the recognition of tumor heterogeneity and complexity. Herein, a kind of multifunctional silicon-based nanostructure, i.e., gold nanoparticles-decorated fluorescent silicon nanorods (Au@SiNRs), is fabricated and exploited for tumor-targeted multimodal imaging-guided photothermal therapy. In particular, the prepared Au@SiNRs feature high photothermal conversion efficiency (~ 43.9%) and strong photothermal stability (photothermal performance stays constant after five-cycle NIR laser irradiation), making them high-performance agents for simultaneously photoacoustic and infrared thermal imaging. The Au@SiNRs are readily modified with targeting peptide ligands, enabling an enhanced tumor accumulation with a high value of ~ 8.74% ID g-1. Taking advantages of these unique merits, the Au@SiNRs are superbly suitable for specifically ablating tumors in vivo without appreciable toxicity under the guidance of multimodal imaging. Typically, all the mice treated with the Au@SiNRs remain alive, and no distinct tumor recurrence is observed during 60-day investigation.

Multifunctional nanoagents for ultrasensitive imaging and photoactive killing of Gram-negative and Gram-positive bacteria

Simultaneous imaging and treatment of infections remains a major challenge, with most current approaches being effective against only one specific group of bacteria or not being useful for diagnosis. Here we develop multifunctional nanoagents that can potentially be used for imaging and treatment of infections caused by diverse bacterial pathogens. The nanoagents are made of fluorescent silicon nanoparticles (SiNPs) functionalized with a glucose polymer (e.g., poly[4-O-(α-D-glucopyranosyl)-D-glucopyranose]) and loaded with chlorin e6 (Ce6). They are rapidly internalized into Gram-negative and Gram-positive bacteria by a mechanism dependent on an ATP-binding cassette (ABC) transporter pathway. The nanoagents can be used for imaging bacteria by tracking the green fluorescence of SiNPs and the red fluorescence of Ce6, allowing in vivo detection of as few as 10⁵ colony-forming units. The nanoagents exhibit in vivo photodynamic antibacterial efficiencies of 98% against Staphylococcus aureus and 96% against Pseudomonas aeruginosa under 660 nm irradiation.

One-step rapid synthesis of fluorescent silicon nanodots for a hydrogen peroxide-related sensitive and versatile assay based on the inner filter effect

In this work, a kind of environment-friendly and water-dispersible silicon nanodot (SiND) was rapidly synthesized by using the mild reagents (3-aminopropyl)triethoxysilane (APTES) and glucose. It was found that the fluorescence of the as-prepared SiNDs can be quenched obviously by permanganate due to the inner filter effect. Inspired by this finding, a novel fluorescent sensor for sensitive detection of hydrogen peroxide (H₂O₂) was developed through the oxidation-reduction reaction between permanganate and H₂O₂. The detection limit of H₂O₂ is down to 2.8 nM. Since H₂O₂ is an important molecule and involved in various studies, this sensor could be applied in various H₂O₂-related biological analyses. As a proof-of-application demonstration, a sensitive biosensor for glucose detection was constructed through the catalytic oxidation of glucose to generate H₂O₂. The as-constructed sensor showed good linear response to glucose over the range from 0.16 to 16 μM with a detection limit of 0.11 μM. Moreover, the biosensor can be readily extended to other sensors for different targets, which indicates the broad applications of the proposed sensing strategy in biomedical analysis.

Recent advances on fluorescent biomarkers of near-infrared quantum dots for in vitro and in vivo imaging

Luminescence probe has been broadly used for bio-imaging applications. Among them, near-infrared (NIR) quantum dots (QDs) are more attractive due to minimal tissue absorbance and larger penetration depth. Above said reasons allowed whole animal imaging without slice scan or dissection. This review describes in vitro and in vivo imaging of NIR QDs in the regions of 650-900 nm (NIR-I) and 1000-1450 nm (NIR-II). Also, we summarize the recent progress in bio-imaging and discuss the future trends of NIR QDs including group II-VI, IV-VI, I-VI, I-III-VI, III-V, and IV semiconductors.

Photostable and Biocompatible Fluorescent Silicon Nanoparticles for Imaging-Guided Co-Delivery of siRNA and Doxorubicin to Drug-Resistant Cancer Cells

The development of effective and safe vehicles to deliver small interfering RNA (siRNA) and chemotherapeutics remains a major challenge in RNA interference-based combination therapy with chemotherapeutics, which has emerged as a powerful platform to treat drug-resistant cancer cells. Herein, we describe the development of novel all-in-one fluorescent silicon nanoparticles (SiNPs)-based nanomedicine platform for imaging-guided co-delivery of siRNA and doxorubicin (DOX). This approach enhanced therapeutic efficacy in multidrug-resistant breast cancer cells (i.e., MCF-7/ADR cells). Typically, the SiNP-based nanocarriers enhanced the stability of siRNA in a biological environment (i.e., medium or RNase A) and imparted the responsive release behavior of siRNA, resulting in approximately 80% down-regulation of P-glycoprotein expression. Co-delivery of P-glycoprotein siRNA and DOX led to > 35-fold decrease in the half maximal inhibitory concentration of DOX in comparison with free DOX, indicating the pronounced therapeutic efficiency of the resultant nanocomposites for drug-resistant breast cancer cells. The intracellular time-dependent release behaviors of siRNA and DOX were revealed through tracking the strong and stable fluorescence of SiNPs. These data provide valuable information for designing effective RNA interference-based co-delivery carriers.

One-pot synthesis of highly fluorescent silicon nanoparticles for sensitive and selective detection of hemoglobin

In this work, a simple, selective, and sensitive probe for hemoglobin based on the quenched fluorescence of silicon nanoparticles (SiNPs) was fabricated. The SiNPs were synthesized by a simple hydrothermal treatment from N-[3-(trimethoxysilyl)propyl]ethylenediamine and sodium citrate. The as-prepared SiNPs exhibited good water-solubility and high fluorescence with the quantum yield of 70%. The fluorescence of the SiNPs could be remarkably quenched by hemoglobin. A wide linear range was obtained from 50 nM to 4000 nM with a LOD of 40 nM. The quenching mechanism was investigated by UV-Vis absorption spectrometry and time-resolved fluorescence spectrometry.

Specific detection of hypochlorite based on the size-selective effect of luminophore integrated MOF-801 synthesized by a one-pot strategy

Hypochlorous acid (HClO), as one of the reactive oxygen species, plays a key role in a variety of physiological and pathological processes, while its accurate and specific in vitro monitoring remains a profound challenge. Herein, a novel luminescent metal-organic framework with high chemical stability has been designed for the specific detection of intracellular ClO-. The specificity was realized by the size-selective effect of MOF-801 with an ultra-small aperture, which can inhibit the entry of large-sized interferents into the cages of MOFs. A universal "ship in a bottle" approach has been proposed to construct this novel sensory platform, in which a large class of luminescent molecules containing carboxylic groups serve as modulators and combine with Zr6 clusters, eventually becoming the luminescent genes of these novel designed MOF-801. Luminescent molecules were readily locked in the framework since they were larger than the small pore entrance of MOF-801, skillfully solving the possible issue of dye leakage. By introducing active sites of 5-aminofluorescein (AF) into MOF-801 (AF@MOF-801) as an example, an excellent ClO- sensing probe was fabricated, which showed strong reliability and excellent sensing performance toward intracellular ClO- with an ultrahigh linear correlation of the Stern-Volmer equation, a rapid response time as short as 30 s and a limit of detection (LOD) as low as 0.05172 μM. Compared with the free AF molecular probe, the specificity of AF@MOF-801 NPs toward ClO- was scarcely affected by other possibly coexistent large-sized interferents in biosystems. The in vitro monitoring of ClO- was also tested with these newly developed AF@MOF-801 NPs, prefiguring their great promise as a robust imaging tool to disclose the complexities of ClO- homeostasis and its pathophysiological contributions.

A facile synthesis of hybrid silicon quantum dots and fluorescent detection of bovine hemoglobin

A new type of hybrid SiQDs was synthesized with a higher nitrogen content, fluorescence intensity and longer fluorescence lifetime.

Inverted Device Architecture for Enhanced Performance of Flexible Silicon Quantum Dot Light-Emitting Diode

Here we report for the first time highly flexible quantum dot light-emitting diodes (QLEDs), in which a layer of red-emitting colloidal silicon quantum dots (SiQDs) works as the optically active component, by replacing a rigid glass substrate with a thin sheet of polyethylene terephthalate (PET). The enhanced optical performance for electroluminescence (EL) at room temperature in air is achieved by taking advantage of the inverted device structure. Our QLEDs do not exhibit parasitic EL emissions from the neighboring compositional layers or surface states of QDs over a wide range of driving voltages and do not exhibit a shift in the EL peak position as the operational voltage increases. Compared to the previous Si-QLEDs with a conventional device structure, our QLED has a longer device operational lifetime and a long-lived EQE value. The currently obtained brightness (∼5000 cd/m²), the 3.1% external quantum efficiency (EQE), and a turn-on voltage as low as 3.5 V are sufficiently high to encourage further developments of Si-QLEDs.

Synthesis, optical properties and theoretical modelling of discrete emitting states in doped silicon nanocrystals for bioimaging

The creation of multiple emission pathways in quantum dots (QDs) is an exciting prospect with fundamental interest and optoelectronic potential. For the first time, we report multiple emission pathways in semiconductor nanocrystals (NCs) where the number of emission pathways desired is controlled by the number of dopant atoms per quantum dot. The origin of additional emission pathways is explained by interactions between dopant states and NC energy levels. Density functional theory (DFT) calculations of undoped 2.3 nm silicon (Si NCs) and the same NCs doped with 2 interstitial Cu atoms show good agreement to experiment. Such calculations provide valuable data to explain the changes in optical transitions due to the Cu dopant in terms of transition energies, quantum yield and dopant position as a function of dopants per NC. Changes in the optical properties of Si NCs induced by dopant concentration include extended excitation range and enhanced absorption coefficients, emission redshifts of up to 60 nm, and a two-fold increase in quantum yields up to 22%. The optical properties of doped NCs lead to significant bioimaging improvements illustrated by in vitro cell imaging, including redshifted excitation wavelengths away from natural autofluorescence and enhanced fluorescent signals.

Fabricating highly luminescent solid hybrids based on silicon nanoparticles: a simple, versatile and green method

In this work, we report a simple but novel method to transfer highly luminescent silicon nanoparticles (Si NPs) from solutions to solids without sacrificing their excellent photoluminescence (PL) properties. Hybrid Si NP/clay phosphors that glowed ultrabright and had colorful PL properties were first obtained. More importantly, large-area and flexible films with superior PL properties can be easily obtained via combining the Si NP/clay hybrids with different kinds of polymer. The Si NP-based phosphors and films from our method show high stabilities with no significant loss of PL performance after long-term storage (several months). In addition, bright yellow-emitting Si NPs were prepared and used as down-converters for white-light-emitting diodes (W-LEDs). Overall, this work presents a simple, versatile and green method to fabricate Si NP-based solid hybrids with superior PL properties, which has promise to be applied in the future in solid-state lighting fields.

One-Step Synthesis of Ultrasmall and Ultrabright Organosilica Nanodots with 100% Photoluminescence Quantum Yield: Long-Term Lysosome Imaging in Living, Fixed, and Permeabilized Cells

Water-dispersible nanomaterials with superbright photoluminescence (PL) emissions and narrow PL bandwidths are urgently desired for various imaging applications. Herein, for the first time, we prepared ultrasmall organosilica nanodots (OSiNDs) with an average size of ∼2.0 nm and ∼100% green-emitting PL quantum efficiency via a one-step hydrothermal treatment of two commercial reagents (a silane molecule and rose bengal). In particular, the structural reorganization and halide loss of rose bengal during the hydrothermal treatment contribute to the ultrahigh quantum yield and low phototoxicity of OSiNDs. Owing to their low pH-induced precipitation/aggregation property, the as-prepared OSiNDs can be used as excellent lysosomal trackers with many advantages: (1) They have superior lysosomal targeting ability with a Pearson's coefficient of 0.98; (2) The lysosomal monitoring time of OSiNDs is up to 48 h, which is much longer than those of commercial lysosomal trackers (<2 h); (3) They do not disturb the pH environment of lysosomes and can be used to visualize lysosomes in living, fixed, and permeabilized cells; (4) They exhibit intrinsic lysosomal tracking ability without the introduction of lysosome-targeting ligands (such as morpholine) and superior photostability; (5) The easy, cost-effective, and scalable synthetic method further ensures that these OSiNDs can be readily used as exceptional lysosomal trackers. We expect that the ultrasmall OSiNDs with superior fluorescence properties and easily modifiable surfaces could be applied as fluorescent nanoprobes, light-emitting diode phosphor, and anticounterfeiting material, which should be able to promote the preparation and application of silicon-containing nanomaterials.