Design of a two-step pulsed pressure-swing adsorption-based oxygen concentrator

Small-scale medical oxygen production unit using PSA technology: modeling and sensitivity analysis

This study presents a solid approach for small-scale medical oxygen production unit using pressure swing adsorption (PSA) technology. The objective of this research is to develop a mathematical model and conduct a sensitivity analysis to optimise the design and operating parameters of the PSA system. Based on the simulation results, an optimal set of operational parameter values has been obtained for the PSA beds. The result shows that the binary system produced oxygen with a purity of 94%, at the adsorption pressure 1 bar and temperature of 308K. The findings demonstrate the effectiveness of the proposed small-scale PSA system for medical oxygen production, highlighting the impact of key parameters and emphasising the need for careful optimisation. The findings serve as a guide for the design and operation of small-scale PSA systems, enabling healthcare facilities to produce their own medical oxygen, thereby improving accessibility and addressing critical shortages during emergencies. Future research may explore the integration of large scale PSA units in hospitals in Morocco.

Review of the Pressure Swing Adsorption Process for the Production of Biofuels and Medical Oxygen: Separation and Purification Technology

The production of biofuels has had a great impact on climate change and the reduction of the use of fossil fuels. There are different technologies used for the separation and production of biofuels, which allow having compounds such as ethanol, methane, oxygen, and hydrogen, one of these promising technologies is the Pressure Swing Adsorption process (PSA). The objectives of this article focus on the production and purification of compounds that achieve purities of 99.5% bioethanol, 94.85% biohydrogen, 95.00% medical oxygen, and 99.99% biomethane through the PSA process; also, a significant review is contemplated to identify the different natural and synthetic adsorbents that have greater adsorption capacity, the different configurations in which a PSA operates are studied and identified, and the different mathematical models that describe the dynamic behavior of all the variables are established that interact in this PSA process, parametric studies are carried out in order to identify the variables that have the greatest effect on the purity obtained. The results obtained in this review allow facilitating the calculation of parameters, the optimization of the process, the automatic control to manipulate certain variables and to achieve the rejection of disturbances to have a recovery and production of biofuels with a high degree of purity.

Application of Nanosize Zeolite Molecular Sieves for Medical Oxygen Concentration

The development of a portable oxygen concentrator is of prime significance for patients with respiratory problems. This paper presents a portable concentrator prototype design using the pressure/vacuum swing adsorption (PVSA) cycle with a deep evacuation step (-0.82 barg) instead of desorption with purge flow to simplify the oxygen production process. The output of the oxygen concentrator is a ~90 vol % enriched oxygen stream in a continuous adsorption and desorption cycle (cycle time ~90 s). The size of the adsorption column is 3 cm in diameter and 20 cm in length. A Li⁺ exchanged 13X nanosize zeolite is used as the adsorbent to selectively adsorb nitrogen from air. A dynamic model of the pressure and vacuum swing adsorption units was developed to study the pressurization and depressurization process inside the microporous area of nanosized zeolites. The describing equations were solved using COMSOL Multiphysics Chemical Engineering module. The output flow rate and oxygen concentration results from the simulation model were compared with the experimental data. Velocity and concentration profiles were obtained to study the adsorption process and optimize the operational parameters.

Advances in Pressure Swing Adsorption for Gas Separation

Pressure swing adsorption (PSA) is a well-established gas separation technique in air separation, gas drying, and hydrogen purification separation. Recently, PSA technology has been applied in other areas like methane purification from natural and biogas and has a tremendous potential to expand its utilization. It is known that the adsorbent material employed in a PSA process is extremely important in defining its properties, but it has also been demonstrated that process engineering can improve the performance of PSA units significantly. This paper aims to provide an overview of the fundamentals of PSA process while focusing specifically on different innovative engineering approaches that contributed to continuous improvement of PSA performance.