Wet-Chemical Synthesis of Amphiphilic Rodlike Silica Particles and their Molecular Mimetic Assembly in Selective Solvents

Randomizing the growth of silica nanofibers for whiteness

In colloids, the shape influences the function. In silica, straight nanorods have already been synthesized from water-in-oil emulsions. By contrast, curly silica nanofibers have been less reported because the underlying growth mechanism remains unexplored, hindering further morphology control for applications. Herein, we describe the synthetic protocol for silica nanofibers with a tunable curliness based on the control of the water-in-oil emulsion droplets. Systematically decreasing the droplet size and increasing their contact angle, the Brownian motion of the droplets intensifies during the silica growth, thus increasing the random curliness of the nanofibers. This finding is supported by simplistic theoretical arguments and experimentally verified by varying the temperature to finely tune the curliness. Assembling these nanofibers toward porous disordered films enhances multiple scattering in the visible range, resulting in increased whiteness in contrast to films constructed by spherical and rod-like building units, which can be useful for, e.g., coatings and pigments.

Colloidal synthesis of metallodielectric Janus matchsticks

We present a gram-scale synthesis of metallodielectric Janus matchsticks, which feature a gold-coated silica sphere and a silica rod. SiO2 Janus matchsticks are synthesized in one batch by growing amine-functionalized SiO2 spheres at the end of SiO2 rods. Gold deposition on the spheres produces Au-SiO2 Janus matchsticks with an aspect ratio controlled by the rod length. The metallodielectric Janus matchsticks, produced by scalable colloidal synthesis, hold great potential as functional colloidal materials.

Anisotropic Multitentacle Janus Particles Synthesized by Selective Asymmetric Growth

Anisotropic colloidal particles with asymmetric morphology possess functionally rich heterogeneous structures, thus offering potential for intricate superstructures or nanodevices. However, it is a challenge to achieve controlled asymmetric surface partitioned growth. In this work, an innovative strategy is developed based on the selective adsorption and growth of emulsion droplets onto different regions of object which is controlled by wettability. It is found that the emulsion droplets can selectively adsorb on the hydrophilic surface but not the hydrophobic one, and further form asymmetric tentacle by the interfacial sol-gel process along its trajectory. Janus particles with an anisotropic shape and multitentacle structure are achieved via integration of emulsion droplet (soft) and seed (hard) templates. The size and number of tentacles exhibit tunability mediated by soft and hard templates, respectively. This general strategy can be expanded to a variety of planar substrates or curved particles, further confirming the correlation between tentacle growth and Brownian motion. Most interestingly, it can be employed to selectively modify one region of surface partitioned particles to achieve an ABC three-component Janus structure.

Flask-like Janus Colloidal Motors with Explicit Direction and Tunable Speed

Nanoparticles with an anisotropic morphology and composition are flourishing in various scientific fields. Their morphology has a great impact on their functions, but the precise regulation of their growth and final morphology is still challenging. Here, flask-like Janus particles (FJPs) with different compositions segmented on the inner and outer surfaces were fabricated via a sol-gel process using different silane precursors. The neck length of the flask-like particles can be controllably regulated by employing different silane precursors. The Pt catalyst was selectively loaded in their cavities, and as-formed FJPs@Pt are employed as colloidal motors. Due to the adjustable neck length, the Janus colloidal motors have explicit directionality and tunable speeds (max diffusion coefficient is 18.2 μm² s^-1).

Janus Surface Micelles on Silica Particles: Synthesis and Application in Enzyme Immobilization

In these years, synthesis and applications of Janus structures have aroused great interest for large-scale applications in chemistry and materials science. Up to now, Janus particles with different morphologies and different functionalities have been synthesized in solutions, but the synthesis of Janus particles on solid surfaces has not been touched. In this research, Janus surface micelles (JSMs) are fabricated on the surfaces of silica particles by polymerization induced surface self-assembly (PISSA) approach, and the JSMs are used for enzyme immobilization. Usually, enzyme immobilization should be able to optimize the performance of the immobilized enzymes, and an ideal immobilization system must offer protection to the immobilized enzyme with retained bioactivity. Herein, it is demonstrated that JSMs on silica particles can be used as an ideal platform for the immobilization of enzymes. To prepare JSMs, poly(2-(dimethylamino) ethyl methacrylate) macro chain transfer agent (PDMAEMA-CTA) brushes on silica particles and poly(di(ethylene glycol) methyl ether methacrylate) macro CTA (PDEGMA-CTA) are employed in reversible addition-fragmentation chain transfer dispersion polymerization of styrene. After polymerization, JSMs with polystyrene cores and PDMAEMA/PDEGMA patches on the surfaces are prepared on silica particles. After quaternization reaction, the quaternized PDMAEMA patches are used for the immobilization of enzymes. Experimental results turn out that enhanced bioactivities of the immobilized enzymes are achieved and the enzyme molecules are well protected by surface Janus structures.

Shape anisotropic colloidal particle fabrication using 2-photon polymerization

HYPOTHESIS

Our ability to dictate the colloid geometry is intimately related to self-assembly. The synthesis of anisotropic colloidal particles is currently dominated by wet chemistry and lithographic techniques. The wet chemical synthesis offers limited particle geometries at bulk quantities. Lithographic techniques, on the other hand, provide precise control over the particle shape, although at lower yields. In this respect, two-photon polymerization (2PP)¹ has attracted growing attention due to its ability to automatically fabricate complex micro/nano structures with high resolution.

EXPERIMENTS

We manufacture precisely designed colloids with sizes ranging from 1 µm to 10 µm with 2PP and optimize the process parameters for each dimension. Moreover, we study the shape dependent Brownian motion of these particles with video microscopy and estimate their diffusion coefficients.

FINDINGS

We observe that increasing the geometrical anisotropy leads to a pronounced deviation from the analytically predicted diffusion coefficient for disks with a given aspect ratio. The deviation is attributed to stronger hydrodynamic coupling with increasing anisotropy. We demonstrate, for the first time, 2PP manufacturing of colloids with tailored geometry. This study opens synthesis of colloidal building blocks to a broader audience with limited access to cleanrooms or wet-chemistry know-how.

Precisely Endowing Colloidal Particles with Silica Branches

A method to modify colloidal particles with silica rods in a water/n-pentanol system is reported here. Because of the interfacial tension between aqueous and n-pentanol phase, water which surrounds the colloidal particles de-wets into droplets during the deposition process of silica. As a result of unidirectional deposition, silica rods grow perpendicularly on the surface of the colloidal particles at the site of the smallest curvature where the water droplet has been de-wetted. By controlling the hydrolysis conditions, particles with certain number of branches or rambutan-like particles can be obtained. This approach opens a path towards the higher levels of colloidal complexity.

Assembly of silica rods into tunable branched living nanostructures mediated by coalescence of catalyst droplets

Branched nanostructures with tunable arm numbers were prepared through the assembly of silica rods mediated by coalescence of catalyst droplets on the end of the rods. The formed primary branched colloids retain living characteristics similar to the original ones, that is, they can further assemble into multilevel and hierarchical branched structures.

Synthesis and assembly of colloidal cuboids with tunable shape biaxiality

The design and assembly of monodisperse colloidal particles not only advances the development of functional materials, but also provides colloidal model systems for understanding phase behaviors of molecules. This communication describes the gram-scale synthesis of highly uniform colloidal cuboids with tunable dimension and shape biaxiality and their molecular mesogen-like assembly into various mesophasic structures in pristine purity. The synthesis relies on the nanoemulsion-guided generation of ammonium sulfate crystals that template the subsequent silica coating. The shape of the cuboidal particles can be tuned from square platelike, to biaxial boardlike, and to rodlike by independently controlling the length, width and thickness of the particles. We demonstrated the assembly of the cuboidal colloids into highly pure mesoscopic liquid crystal phases, including smectic A, biaxial smectic A, crystal B, discotic, and columnar phases, as well as established a correlation between mesophasic formation and colloidal biaxiality in experiments.

Bifunctional Solid Catalyst for Organic Reactions in Water: Simultaneous Anchoring of Acetylacetone Ligands and Amphiphilic Ionic Liquid "Tags" by Using a Dihydropyran Linker

The use of solid catalysts to promote organic reactions in water faces the inherent difficulty of the poor mass-transfer efficiency of organic substances in water, which is often responsible for insufficient reaction and low yields. To solve this problem, the solid surface can be manipulated to become amphiphilic. However, the introduction of surfactant-like moieties onto the surface of silica-based materials is not easy. By using an accessible dihydropyran derivative as a grafting linker, a surfactant-combined bifunctional silica-based solid catalyst that possessed an ionic liquid tail and a metal acetylacetonate moiety was prepared through a mild Lewis-acid-catalyzed ring-opening reaction with a thiol-functionalized silica. The surfactant-combined silica-supported metal acetylacetone catalysts displayed excellent catalytic activity in water for a range of reactions. The solid catalyst was also shown to be recyclable, and was reused several times without significant loss in activity.

Anisotropic Colloids: From Non-Templated to Patchy Templated Synthesis

Self-assembly of colloidal particles is an important and challenging way to generate novel colloidal superstructures for new materials. Recent progress on syntheses of anisotropic colloids highlights opportunities for such self-assembly, particularly in defining new non-cubic superstructures. Both non-templated and templated synthesis play an important role in preparing anisotropic colloidal particles. In this article, we briefly summarize recent progress in anisotropic colloids by non-templated and conventional templated synthesis, and introduce a conceptual strategy of "patchy templated synthesis" that differs from the conventional approach. We illustrate this strategy with recent examples emanating from colloidal rings, and discuss the future opportunities with this strategy for the synthesis of other anisotropic colloids.

Photoluminescent and pH-responsive supramolecular structures from co-assembly of carbon quantum dots and zwitterionic surfactant micelles

Mixing negatively charged carbon quantum dots with a zwitterionic surfactant in water produces a variety of supramolecular structures, which are photoluminescent and show a reversible response to pH.

Phenanthriplatin(iv) conjugated multifunctional up-converting nanoparticles for drug delivery and biomedical imaging

Platinum-based drugs cisplatin, carboplatin, and oxaliplatin are widely used in the clinical treatment of cancer.

Directed Assembly of Janus Cylinders by Controlling the Solvent Polarity

This study demonstrates the possibility of controlling the directed self-assembly of microsized Janus cylinders by changing the solvent polarity of the assembly media. Experimental results are analyzed and theoretical calculations of the free energy of adhesion (ΔG^ad) are performed to elucidate the underlying basic principles and investigate the effects of the solvent on the self-assembled structures. This approach will pave a predictive route for controlling the structures of assembly depending on the solvent polarity. In particular, we find that a binary solvent system with precisely controlled polarity induces directional assembly of the microsized Janus cylinders. Thus, the formation of two-dimensional (2D) and three-dimensional (3D) assembled clusters can be reliably tuned by controlling the numbers of constituent Janus cylinders in a binary solvent system. Finally, this approach is expanded to stepwise assembly, which forms unique microstructures via secondary growth of primary seed clusters formed by the Janus cylinders. We envision that this investigation is highly promising for the construction of desired superstructures using a wide variety of polymeric Janus microparticles with chemical and physical multicompartments.

Synthesis of anisotropic silica colloids

Morphological evolution of tadpole-like hollow silica particles, and corresponding TEM images of typical intermediate and final products.

Domed Silica Microcylinders Coated with Oleophilic Polypeptides and Their Behavior in Lyotropic Cholesteric Liquid Crystals of the Same Polypeptide

Liquid crystals can organize dispersed particles into useful and exotic structures. In the case of lyotropic cholesteric polypeptide liquid crystals, polypeptide-coated particles are appealing because the surface chemistry matches that of the polymeric mesogen, which permits a tighter focus on factors such as extended particle shape. The colloidal particles developed here consist of a magnetic and fluorescent cylindrically symmetric silica core with one rounded, almost hemispherical end. Functionalized with helical poly(γ-stearyl-l-glutamate) (PSLG), the particles were dispersed at different concentrations in cholesteric liquid crystals (ChLC) of the same polymer in tetrahydrofuran (THF). Defects introduced by the particles to the director field of the bulk PSLG/THF host led to a variety of phases. In fresh mixtures, the cholesteric mesophase of the PSLG matrix was distorted, as reflected in the absence of the characteristic fingerprint pattern. Over time, the fingerprint pattern returned, more quickly when the concentration of the PSLG-coated particles was low. At low particle concentration the particles were "guided" by the PSLG liquid crystal to organize into patterns similar to that of the re-formed bulk chiral nematic phase. When their concentration increased, the well-dispersed PSLG-coated particles seemed to map onto the distortions in the bulk host's local director field. The particles located near the glass vial-ChLC interfaces were stacked lengthwise into architectures with apparent two-dimensional hexagonal symmetry. The size of these "crystalline" structures increased with particle concentration. They displayed remarkable stability toward an external magnetic field; hydrophobic interactions between the PSLG polymers in the shell and those in the bulk LC matrix may be responsible. The results show that bio-inspired LCs can assemble suitable colloidal particles into soft crystalline structures.

Synthesis of Cone-Shaped Colloids from Rod-Like Silica Colloids with a Gradient in the Etching Rate

We present the synthesis of monodisperse cone-shaped silica colloids and their fluorescent labeling. Rod-like silica colloids prepared by ammonia-catalyzed hydrolysis and condensation of tetraethyl orthosilicate in water droplets containing polyvinylpyrrolidone cross-linked by citrate ions in pentanol were found to transform into cone-shaped particles upon mild etching by NaOH in water. The diameter and length of the resulting particles were determined by those of the initial rod-like silica colloids. The mechanism responsible for the cone-shape involves silica etching taking place with a varying rate along the length of the particle. Our experiments thus also lead to new insights into the variation of the local particle structure and composition. These are found to vary gradually along the length of the rod, as a result of the way the rod grows out of a water droplet that keeps itself attached to the flat end of the bullet-shaped particles. Subtle differences in composition and structure could also be resolved by high-resolution stimulated emission depletion confocal microscopy on fluorescently labeled particles. The incorporation of a fluorescent dye chemically attached to an amine-based silane coupling agent resulted in a distribution of fluorophores mainly on the outside of the rod-shaped particles. In contrast, incorporation of the silane coupling agent alone resulted in a homogeneous distribution. Additionally, we show that etching rods, where a silane coupling agent alone was incorporated and subsequently coupled to a fluorescent dye, resulted in fluorescent silica cones, the orientation of which can be discerned using super-resolution confocal microscopy.

Synthesis and Liquid-Crystal Behavior of Bent Colloidal Silica Rods

The design and assembly of novel colloidal particles are of both academic and technological interest. We developed a wet-chemical route to synthesize monodisperse bent rigid silica rods by controlled perturbation of emulsion-templated growth. The bending angle of the rods can be tuned in a range of 0-50° by varying the strength of perturbation in the reaction temperature or pH in the course of rod growth. The length of each arm of the bent rods can be individually controlled by adjusting the reaction time. For the first time we demonstrated that the bent silica rods resemble banana-shaped liquid-crystal molecules and assemble into ordered structures with a typical smectic B2 phase. The bent silica rods could serve as a visualizable mesoscopic model for exploiting the phase behaviors of bent molecules which represent a typical class of liquid-crystal molecules.

Colloidosome like structures: self-assembly of silica microrods

Self-assembly of micron-sized silica rods is demonstrated using a Pickering emulsion based strategy.

Mechanistic Insight into the Synthesis of Silica-Based "Matchstick" Colloids

We report an insight into the synthesis of silica-based "matchstick"-shaped colloidal particles, which are of interest in the area of self-propulsion on small length scales. The generation of aqueous emulsion droplets dispersed in an n-pentanol-rich continuous phase and their use as reaction centers allows for the fabrication of siliceous microparticles that exhibit anisotropy in both particle morphology, that is, a "matchstick" shape, and chemistry, that is, a transition-metal oxide-enriched head. We provide a series of kinetic studies to gain a mechanistic understanding and unravel the particle formation and growth processes. Additionally, we demonstrate the ability to select the aspect ratio of the "matchstick" particle in a straightforward manner.

Preparation and enhanced catalytic activity of amphiphilic rambutan-like micro-reactors

The catalytic activity of amphiphilic rambutan-like micro-reactors in biphasic environments is shown.

Site-specific growth of polymers on silica rods

Colloids specifically developed for self-assembly (SA) into advanced functional materials have rapidly become more complex, as this complexity allows for more ways to optimize both the SA process and the properties of the resulting materials. For instance, by creating 'patchy' particles more open structures can be achieved through directional interactions. However, the number of ways in which site-specific chemistry can be achieved on particle surfaces is still limited. Here, we show how polymer patches can be specifically grown onto only the flat end of bullet-shaped silica rods by utilizing a subtle anisotropy in surface tension and shape caused by the growth mechanism of the rods. Conversely, if the bullet-shaped silica rods are used as 'Pickering-emulsion' stabilizers the same surface tension effects exclusively direct the orientation of the rods into a 'hedgehog-morphology'. Finally, we demonstrate how an external electric field can direct the particles in a 'vectorial' way.

Photoelectric cooperative patterning of liquid permeation on the micro/nano hierarchically structured mesh film with low adhesion

Stimuli-responsive surface wettability has been intensively studied, especially wettability controlled by photoelectric cooperation, which appears to be a trend for more effective surface wetting. In this field, the patterning of controllable surface wettability is still a challenge in the application of liquid-printing techniques because of the high adhesion and high responsive voltage, as well as low mechanical strength, of the substrate. Herein, we have demonstrated the patterning of liquid permeation controlled by photoelectric cooperative wetting on the micro/nano hierarchically structured ZnO mesh film. The special micro/nano hierarchically structured ZnO mesh is beneficial for lowering adhesion force on the mesh surface than those of the TiO2/AAO nanopore array films previously reported for the discontinuous tri-phase contact line, in addition to precisely controlled microscale liquid movement with considerably lower threshold voltage for the hierarchical structure. Moreover, the stainless-steel mesh with different pore sizes as a substrate behaves with higher mechanical strength and lower cost, compared with the anodized Ti mesh. Thus, this work is promising for accelerating the development of patterned liquid permeation and extending the application of micro/nanofluidic system and micronanoelectronic technology.

Synthesis of very small diameter silica nanofibers using sound waves

Silica nanofibers of an average diameter of 30 nm were synthesized using sound waves.

Synthesis of segmented silica rods by regulation of the growth temperature

The control of the diameter of colloidal structures is of fundamental interest and practical importance. We synthesized segmented silica rods by regulating the reaction temperature while the rods were growing. With higher growth temperatures, the segment diameter became smaller. Longer incubation times gave longer segments at the same temperature. Similarly, high temperature for the same incubation time gave longer segments. It appears that the correlation between temperature and diameter results from the relation between temperature and the size of the emulsion droplet, that is, the higher the temperature, the smaller the emulsion droplet.

Asymmetric organic/metal(oxide) hybrid nanoparticles: synthesis and applications

Asymmetric particles (APs) with broken centrosymmetry are of great interest, due to the asymmetric surface properties and diverse functionalities. In particular, organic/metal(oxide) APs naturally combine the significantly different and complementary properties of organic and inorganic species, leading to their unique applications in various fields. In this review article, we highlighted recent advances in the synthesis and applications of organic/metal(oxide) APs. This type of APs is grounded on chemical or physical interactions between metal(oxide) NPs and organic small molecular or polymeric ligands. The synthetic methodologies were summarized in three categories, including the selective surface modifications, phase separation of mixed ligands on the surface of metal(oxide) NPs, and direct synthesis of APs. We further discussed the unique applications of organic/metal(oxide) APs in self-assembly, sensors, catalysis, and biomedicine, as a result of the distinctions between asymmetrically distributed organic and inorganic components. Finally, challenges and future directions are discussed in an outlook section.

Recent progress on patchy colloids and their self-assembly

'Patchy colloids' is a term that has been recently introduced to indicate specially engineered particles with directional interactions. Based on this concept, a 'bottom-up' process for fabricating functional materials and devices has been envisioned, which employs colloidal building blocks and mimics molecular bonding. This article reviews recent progress which has been made in the synthesis and self-assembly of patchy colloids and discusses future directions as well as unresolved challenges.

pH-induced outward movement of star centers within coumarin-centered star-block polymer micelles

A novel coumarin-centered amphiphilic star-block polymer of C-(PDMAEMA(80)-b-PS(8))(3) has been designed to investigate the pH-induced accompanying outward movement of hydrophobic coumarin centers within the polymer micelles upon protonation.