Supported Rhodium Catalysts for Ammonia-Borane Hydrolysis: Dependence of the Catalytic Activity on the Highest Occupied State of the Single Rhodium Atoms

Efficient Hydrogen Generation from Ammonia Borane Hydrolysis on a Tandem Ruthenium-Platinum-Titanium Catalyst

Hydrolysis of ammonia borane (NH3BH3, AB) involves multiple undefined steps and complex adsorption and activation, so single or dual sites are not enough to rapidly achieve the multi-step catalytic processes. Designing multi-site catalysts is necessary to enhance the catalytic performance of AB hydrolysis reactions but revealing the matching reaction mechanisms of AB hydrolysis is a great challenge. In this work, we propose to construct RuPt-Ti multi-site catalysts to clarify the multi-site tandem activation mechanism of AB hydrolysis. Experimental and theoretical studies reveal that the multi-site tandem mode can respectively promote the activation of NH3BH3 and H2O molecules on the Ru and Pt sites as well as facilitate the fast transfer of *H and the desorption of H2 on Ti sites at the same time. RuPt-Ti multi-site catalysts exhibit the highest turnover frequency (TOF) of 1293 min-1 for AB hydrolysis reaction, outperforming the single-site Ru, dual-site RuPt and Ru-Ti catalysts. This study proposes a multi-site tandem concept for accelerating the dehydrogenation of hydrogen storage material, aiming to contribute to the development of cleaner, low-carbon, and high-performance hydrogen production systems.

Silica Confinement for Stable and Magnetic Co-Cu Alloy Nanoparticles in Nitrogen-Doped Carbon for Enhanced Hydrogen Evolution

Ammonia borane (AB) with 19.6 wt % H2 content is widely considered a safe and efficient medium for H2 storage and release. Co-based nanocatalysts present strong contenders for replacing precious metal-based catalysts in AB hydrolysis due to their high activity and cost-effectiveness. However, precisely adjusting the active centers and surface properties of Co-based nanomaterials to enhance their activity, as well as suppressing the migration and loss of metal atoms to improve their stability, presents many challenges. In this study, mesoporous-silica-confined bimetallic Co-Cu nanoparticles embedded in nitrogen-doped carbon (CoxCu1-x@NC@mSiO2) were synthesized using a facile mSiO2-confined thermal pyrolysis strategy. The obtained product, an optimized Co0.8Cu0.2@NC@mSiO2 catalyst, exhibits enhanced performance with a turnover frequency of 240.9 molH2 ⋅ molmetal ⋅ min-1 for AB hydrolysis at 298 K, surpassing most noble-metal-free catalysts. Moreover, Co0.8Cu0.2@NC@mSiO2 demonstrates magnetic recyclability and extraordinary stability, with a negligible decline of only 0.8 % over 30 cycles of use. This enhanced performance was attributed to the synergistic effect between Co and Cu, as well as silica confinement. This work proposes a promising method for constructing noble-metal-free catalysts for AB hydrolysis.

Insights into the hydrogen generation and catalytic mechanism on Co-based nanocomposites derived from pyrolysis of organic metal precursor

Hydrogen generation from boron hydride is important for the development of hydrogen economy. Cobalt (Co) element has been widely used in the hydrolysis of boron hydride. Pyrolysis is a common method for materials synthesis in catalytic fields. Herein, Co-based nanocomposites derived from the pyrolysis of organic metal precursors and used for hydrolysis of boron hydride are summarized and discussed. The different precursors consisting of MOF, supported, metal, and metal phosphide precursors are summarized. The catalytic mechanism consisting of dissociation mechanism based on oxidative addition-reduction elimination, pre-activation mechanism, SN2 mechanism, four-membered ring mechanism, and acid-base mechanism is intensively discussed. Finally, conclusions and outlooks are conveyed from the design of high-efficiency catalysts, the characterization of catalyst structure, the enhancement of catalytic activities, the investigation of the catalytic mechanism, and the catalytic stability of active structure. This review can provide guidance for designing high-efficiency catalysts and boosting development of hydrogen economy.

CoP/Co heterojunction on porous g-C3N4 nanosheets as a highly efficient catalyst for hydrogen generation

Designing non-precious catalysts to synergistically achieve a facilitated exposure of abundant active sites is highly desired but remains a significant challenge. Herein, a hetero-structured catalyst CoP-Co supported on porous g-C3N4 nanosheets (CoP-Co/CN-I) was prepared by pyrolysis and P-inducing strategy. The optimal catalyst achieves a turnover frequency (TOF) of 26 min-1 at room temperature and the apparent activation energy (Ea) is 35.5 kJ·mol-1. The catalytic activity is ranked top among the non-precious metal phosphides or the other supports. Meanwhile, the catalytic activity has no significant decrease even after 5 cycles. The CoP/Co interfaces provide richly exposed active sites, optimize hydrogen/water absorption free energy via electronic coupling, and thus improve the catalytic activity. The experimental results reveal that the CoP/Co heterojunction improves the catalytic activity due to the construction of dual-active sites. This research facilitates the innovative construction of non-noble metal catalysts to meet industrial demand for heterogeneous catalysis.

A Heterogeneous Single Atom Cobalt Catalyst for Highly Efficient Acceptorless Dehydrogenative Coupling Reactions

A fundamental understanding of metal active sites in single-atom catalysts (SACs) is important and challenging in the development of high-performance catalyst systems. Here, a highly efficient and straightforward molten-salt-assisted approach is reported to create atomically dispersed cobalt atoms supported over vanadium pentoxide layered material, with each cobalt atom coordinated with four neighboring oxygen atoms. The liquid environment and the strong polarizing force of the molten salt at high temperatures potentially favor the weakening of VO bonding and the formation of CoO bonding on the vanadium oxide surface. This cobalt SAC achieves extraordinary catalytic efficiency in acceptorless dehydrogenative coupling of alcohols with amines to give imines, with more than 99% selectivity under almost 100% conversion within 3 h, along with a high turnover frequency (TOF) of 5882 h^-1 , exceeding those of previously reported benchmarking catalysts. Moreover, it delivers excellent recyclability, reaction scalability, and substrate tolerance. Density functional theory (DFT) calculations further confirm that the optimized coordination environment and strong electronic metal-support interaction contribute significantly to the activation of reactants. The findings provide a feasible route to construct SACs at the atomic level for use in organic transformations.

Recent Advances and Perspectives on Supported Catalysts for Heterogeneous Hydrogen Production from Ammonia Borane

Ammonia borane (AB), a liquid hydrogen storage material, has attracted increasing attention for hydrogen utilization because of its high hydrogen content. However, the slow kinetics of AB hydrolysis and the indefinite catalytic mechanism remain significant problems for its large-scale practical application. Thus, the development of efficient AB hydrolysis catalysts and the determination of their catalytic mechanisms are significant and urgent. A summary of the preparation process and structural characteristics of various supported catalysts is presented in this paper, including graphite, metal-organic frameworks (MOFs), metal oxides, carbon nitride (CN), molybdenum carbide (MoC), carbon nanotubes (CNTs), boron nitride (h-BN), zeolites, carbon dots (CDs), and metal carbide and nitride (MXene). In addition, the relationship between the electronic structure and catalytic performance is discussed to ascertain the actual active sites in the catalytic process. The mechanism of AB hydrolysis catalysis is systematically discussed, and possible catalytic paths are summarized to provide theoretical considerations for the designing of efficient AB hydrolysis catalysts. Furthermore, three methods for stimulating AB from dehydrogenation by-products and the design of possible hydrogen product-regeneration systems are summarized. Finally, the remaining challenges and future research directions for the effective development of AB catalysts are discussed.

Ultrafine Pt nanoparticles anchored on core-shell structured zeolite-carbon for efficient catalysis of hydrogen generation

Ammonia borane (AB) is a potential hydrogen storage material with high-efficiency hydrolytic dehydrogenation under a suitable catalyst. Noble metal catalysts have drawn a lot of attention. In this study, a carbon-coated zeolite was obtained by calcination at high temperatures using glucose as a carbon source. Pt nanoparticles were fixed on a core-shell composite support by a simple chemical reduction method. A series of catalysts were prepared with different synthesis parameters. The results show that PSC-2 has excellent catalytic performance for hydrolytic dehydrogenation of AB in alkaline solution at room temperature, and the turnover frequency (TOF) is 593 min-1. The excellent catalytic performance is attributed to the carbon layer on the zeolite surface which inhibits the aggregation or deformation of metals in the catalytic reaction. The metal-support interaction activates the water and accelerates the rate-limiting step of hydrolysis. The activation energy (E a = 44 kJ mol-1) was calculated based on the reaction temperature. In addition, the kinetics of AB hydrolysis was studied, and the effects of catalyst concentration, AB concentration and NaOH concentration on AB hydrolysis rate were further investigated. The high-efficiency catalyst prepared in this work provides a new strategy for the development of chemical hydrogen production in the field of catalysis.

Volcano-type relationship between oxidation states and catalytic activity of single-atom catalysts towards hydrogen evolution

To date, the effect of oxidation state on activity remains controversial in whether higher or lower oxidation states benefit the enhancement of catalytic activity. Herein, we discover a volcanic relationship between oxidation state and hydrogen evolution reaction activity based on Os single-atom catalysts. Firstly, a series of Os SACs with oxidation states ranging from  + 0.9 to  + 2.9 are synthesized via modifying the coordination environments, including Os-N₃S₁, Os-N₄, Os-S₆, Os-C₃, and Os-C₄S₂. A volcano-type relation between oxidation states and hydrogen evolution activity emerge with a summit at a moderate experimental oxidation state of  + 1.3 (Os-N₃S₁). Mechanism studies illustrate that with increasing oxidation states, the adsorption of H atoms on Os is strengthened due to increased energy level and decreased occupancy of anti-bonding states of Os-H bond until the anti-bonding states become empty. Further increasing the oxidation states weakens hydrogen adsorption because of the decreased occupancy of Os-H bonding states. In this work, we emphasize the essential role of oxidation state in manipulating activity, which offers insightful guidance for the rational design of single-atom catalysts.

While single atom catalysis offers high efficiency for materials use, different possible atomic configurations yield differing activities. Here, authors modulate single-atom Os coordinations to show a volcano relationship between oxidation state and H₂ evolution electrocatalytic activities.

Highly efficient overall urea electrolysis via single-atomically active centers on layered double hydroxide

Anodic urea oxidation reaction (UOR) is an intriguing half reaction that can replace oxygen evolution reaction (OER) and work together with hydrogen evolution reaction (HER) toward simultaneous hydrogen fuel generation and urea-rich wastewater purification; however, it remains a challenge to achieve overall urea electrolysis with high efficiency. Herein, we report a multifunctional electrocatalyst termed as Rh/NiV-LDH, through integration of nickel-vanadium layered double hydroxide (LDH) with rhodium single-atom catalyst (SAC), to achieve this goal. The electrocatalyst delivers high HER mass activity of 0.262 A mg^-1 and exceptionally high turnover frequency (TOF) of 2.125 s^-1 at an overpotential of 100 mV. Moreover, exceptional activity toward urea oxidation is addressed, which requires a potential of 1.33 V to yield 10 mA cm^-2, endorsing the potential to surmount the sluggish OER. The splendid catalytic activity is enabled by the synergy of the NiV-LDH support and the atomically dispersed Rh sites (located on the Ni-V hollow sites) as evidenced both experimentally and theoretically. The self-supported Rh/NiV-LDH catalyst serving as the anode and cathode for overall urea electrolysis (1 mol L^-1 KOH with 0.33 mol L^-1 urea as electrolyte) only requires a small voltage of 1.47 V to deliver 100 mA cm^-2 with excellent stability. This work provides important insights into multifunctional SAC design from the perspective of support sites toward overall electrolysis applications.

Single-Atom-Based Catalysts for Photocatalytic Water Splitting on TiO2 Nanostructures

H2 generation from photocatalytic water splitting is one of the most promising approaches to producing cost-effective and sustainable fuel. Nanostructured TiO2 is a highly stable and efficient semiconductor photocatalyst for this purpose. The main drawback of TiO2 as a photocatalyst is the sluggish charge transfer on the surface of TiO2 that can be tackled to a great extent by the use of platinum group materials (PGM) as co-catalysts. However, the scarcity and high cost of the PGMs is one of the issues that prevent the widespread use of TiO2/PGM systems for photocatalytic H2 generation. Single-atom catalysts which are currently the frontline in the catalysis field can be a favorable path to overcome the scarcity and further advance the use of noble metals. More importantly, single-atom (SA) catalysts simultaneously have the advantage of homogenous and heterogeneous catalysts. This mini-review specifically focuses on the single atom decoration of TiO2 nanostructures for photocatalytic water splitting. The latest progress in fabrication, characterization, and application of single-atoms in photocatalytic H2 generation on TiO2 is reviewed.

Tungsten-Based Nanocatalysts: Research Progress and Future Prospects

The high price of noble metal resources limits its commercial application and stimulates the potential for developing new catalysts that can replace noble metal catalysts. Tungsten-based catalysts have become the most important substitutes for noble metal catalysts because of their rich resources, friendly environment, rich valence and better adsorption enthalpy. However, some challenges still hinder the development of tungsten-based catalysts, such as limited catalytic activity, instability, difficult recovery, and so on. At present, the focus of tungsten-based catalyst research is to develop a satisfactory material with high catalytic performance, excellent stability and green environmental protection, mainly including tungsten atomic catalysts, tungsten metal nanocatalysts, tungsten-based compound nanocatalysts, and so on. In this work, we first present the research status of these tungsten-based catalysts with different sizes, existing forms, and chemical compositions, and further provide a basis for future perspectives on tungsten-based catalysts.

Atomic Interface-Exciting Catalysis on Cobalt Nitride-Oxide for Accelerating Hydrogen Generation

The rational design of the interface structure between nitride and oxide using the same metallic element and correlating the interfacial active center with a determined catalytic mechanism remain challenging. Herein, a Co₄ N-Co₃ O₄ interface structure is designed to determine the effect of interfacial active centers on hydrogen generation from ammonia borane. An unparalleled catalytic activity toward H₂ production with a turnover frequency up to 79 min^-1 is achieved on Co₄ N-Co₃ O₄ @C catalyst for ten recycles. Experimental analyses and theoretical simulation suggest that the atomic interface-exciting effect (AieE) is responsible for the high catalytic activity. The Co₄ N-Co₃ O₄ interface facilitates the targeted adsorption and activation of NH₃ BH₃ and H₂ O molecules to generate H^* and H₂ . The two active centers of Co_(N)^* and Co_(O)^* at the Co₄ N-Co₃ O₄ interface activate NH₃ BH₃ and H₂ O, respectively. This proof-of-concept research on AieE provides important insights regarding the design of heterogeneous catalysts and promotes the development of the nature and regulation of energy chemical conversion.

Metal-Support Synergistic Catalysis in Pt/MoO3-x Nanorods toward Ammonia Borane Hydrolysis with Efficient Hydrogen Generation

Ammonia borane (NH₃BH₃, AB) serves as a promising material for chemical storage of hydrogen owing to its high hydrogen density and superior stability, in which the development of highly efficient heterogeneous catalysts toward AB hydrolysis plays a crucial role. Herein, we report Pt atomic clusters supported on MoO_3-x nanorods using a two-step process: MoO_3-x nanorods were synthesized at various calcination temperatures, followed by a further deposition-precipitation approach to obtain Pt/MoO_3-x catalysts (denoted as Pt/MoO_3-x-T, T = 300, 400, 500, and 600 °C). The optimized Pt/MoO_3-x-500 catalyst exhibits a prominent catalytic performance toward hydrolytic dehydrogenation of AB for H₂ generation, with a turnover frequency value of 2268.6 min^-1, which stands at the top level among the reported catalysts. Moreover, the catalyst shows a remarkable stability with 90% activity remaining after five cycles. A combination investigation including HR-TEM, ac-HAADF-STEM, XPS, in situ CO-IR, XANES, and Bader charge analysis verifies the formation of Pt²⁺-O_v-Mo⁵⁺ (O_v represents oxygen vacancy), whose concentration is dependent on the strength of the metal-support interaction. Studies on the structure-property correlation based on an isotopic kinetic experiment, in situ FT-IR, and DFT calculations further reveal that the Mo⁵⁺-O_v sites accelerate the dissociation of H₂O molecules (rate-determining step), while the adjacent Pt²⁺ species facilitates the cleavage of the B-H bond in the AB molecule to produce H₂. This work provides a fundamental and systematic understanding on the metal-support synergistic catalysis toward robust H₂ production, which is constructive for hydrogen storage and energy catalysis.

Engineering Bimodal Oxygen Vacancies and Pt to Boost the Activity Toward Water Dissociation

Water dissociation is the rate-limiting step of several energy-related reactions due to the high energy barrier required for breaking the oxygen-hydrogen bond. In this work, a bimodal oxygen vacancy (V_O ) catalysis strategy is adopted to boost the efficient water dissociation on Pt nanoparticles. The single facet-exposed TiO₂ surface and NiO_x nanocluster possess two modes of V_O different from each other. In ammonia borane hydrolysis, the highest catalytic activity among Pt-based materials is achieved with the turnover frequency of 618 min^-1 under alkaline-free conditions at 298 K. Theoretical simulation and characterization analyses reveal that the bimodal V_O significantly promotes the water dissociation in two ways. First, an ensemble-inducing effect of Pt and V_O in TiO₂ drives the activation of water molecules. Second, an electron promoter effect induced by the electron transfer from V_O in NiO_x to Pt further enhances the ability of Pt to dissociate water and ammonia borane. This insight into bimodal V_O catalysis establishes a new avenue to rationally design heterogeneous catalytic materials in the energy chemistry field.

Cobalt sandwich-stabilized rhodium nanocatalysts for ammonia borane and tetrahydroxydiboron hydrolysis

A bulky organocobalt sandwich-supported Rh nanoparticle is an efficient, stable and recyclable nanocatalyst for hydrolysis of both ammonia borane and tetrahydroxydiboron to H2.

Maximizing hydrogen production by AB hydrolysis with Pt@cobalt oxide/N, O-rich carbon and alkaline ultrasonic irradiation

Non-precious metal oxide/carbon hybrid has been identified as a promising platform to stabilized precious metals for ammonia borane (AB) hydrolysis to produce hydrogen, whereas their facile and environmental-friendly synthesis remains...

The Hydrogen-Storage Challenge: Nanoparticles for Metal-Catalyzed Ammonia Borane Dehydrogenation

Dihydrogen is one of the sustainable energy vectors envisioned for the future. However, the rapidly reversible and secure storage of large quantities of hydrogen is still a technological and scientific challenge. In this context, this review proposes a recent state-of-the-art on H₂ production capacities from the dehydrogenation reaction of ammonia borane (and selected related amine-boranes) as a safer solid source of H₂ by hydrolysis (or solvolysis), catalyzed by nanoparticle-based systems. The review groups the results according to the transition metals constituting the catalyst with a mention to their current cost and availability. This includes the noble metals Rh, Pd, Pt, Ru, Ag, as well as cheaper Co, Ni, Cu, and Fe. For each element, the monometallic and polymetallic structures are presented and the performances are described in terms of turnover frequency and recyclability. The structure-property links are highlighted whenever possible. It appears from all these works that the mastery of the preparation of catalysts remains a crucial point both in terms of process, and control and understanding of the electronic structures of the elaborated nanomaterials. A particular effort of the scientific community remains to be made in this multidisciplinary field with major societal stakes.

Mechanistic Insight into the Synergetic Interaction of Ammonia Borane and Water on ZIF-67-Derived Co@Porous Carbon for Controlled Generation of Dihydrogen

Regarding dihydrogen as a clean and renewable energy source, ammonia borane (NH₃BH₃, AB) was considered as a chemical H₂-storage and H₂-delivery material due to its high storage capacity of dihydrogen (19.6 wt %) and stability at room temperature. To advance the development of efficient and recyclable catalysts for hydrolytic dehydrogenation of AB with parallel insight into the reaction mechanism, herein, ZIF-67-derived fcc-Co@porous carbon nano/microparticles (cZIF-67_nm/cZIF-67_μm) were explored to promote catalytic dehydrogenation of AB and generation of H_2(g). According to kinetic and computational studies, zero-order dependence on the concentration of AB, first-order dependence on the concentration of cZIF-67_nm (or cZIF-67_μm), and a kinetic isotope effect value of 2.45 (or 2.64) for H₂O/D₂O identify the Co-catalyzed cleavage of the H-OH bond, instead of the H-BH₂NH₃ bond, as the rate-determining step in the hydrolytic dehydrogenation of AB. Despite the absent evolution of H_2(g) in the reaction of cZIF-67 and AB in the organic solvents (i.e., THF or CH₃OH) or in the reaction of cZIF-67 and water, Co-mediated activation of AB and formation of a Co-H intermediate were evidenced by theoretical calculation, infrared spectroscopy in combination with an isotope-labeling experiment, and reactivity study toward CO₂-to-formate/H₂O-to-H₂ conversion. Moreover, the computational study discovers a synergistic interaction between AB and the water cluster (H₂O)₉ on fcc-Co, which shifts the splitting of water into an exergonic process and lowers the thermodynamic barrier for the generation and desorption of H_2(g) from the Co-H intermediates. With the kinetic and mechanistic study of ZIF-67-derived Co@porous carbon for catalytic hydrolysis of AB, the spatiotemporal control on the generation of H_2(g) for the treatment of inflammatory diseases will be further investigated in the near future.

Ultrafine RhNi Nanocatalysts Confined in Hollow Mesoporous Carbons for a Highly Efficient Hydrogen Production from Ammonia Borane

Ammonia borane (AB) has received growing research interest as one of the most promising hydrogen-storage carrier materials. However, fast dehydrogenation of AB is still limited by sluggish catalytic kinetics over current catalysts. Herein, highly uniform and ultrafine bimetallic RhNi alloy nanoclusters encapsulated within nitrogen-functionalized hollow mesoporous carbons (defined as RhNi@NHMCs) are developed as highly active, durable, and selective nanocatalysts for fast hydrolysis of AB under mild conditions. Remarkable activity with a high turnover frequency (TOF) of 1294 mol_H2 mol_Rh^-1 min^-1 and low activation energy (E_a) of 18.6 kJ mol^-1 is observed at room temperature, surpassing the previous Rh-based catalysts. The detailed mechanism studies reveal that when catalyzed by RhNi@NHMCs, a covalently stable O-H bond by H₂O first cleaves in electropositive H* and further attacks B-H bond of AB to stoichiometrically produce 3 equiv of H₂, whose catalytic kinetics is restricted by the oxidation cleavage of the O-H bond. Compositional and structural features of RhNi@NHMCs result in synergic electronic, functional, and support add-in advantages, kinetically accelerating the cleavage of the attacked H₂O (O-H bond) and remarkably promoting the catalytic hydrolysis of AB accordingly. This present work represents a new and effective strategy for exploring high-performance supported metal-based alloy nanoclusters for (electro)catalysis.

Which is Better for Nanomedicines: Nanocatalysts or Single-Atom Catalysts?

With the rapid advancements in nanotechnology and materials science, numerous nanomaterials have been used as catalysts for nanomedical applications. Their design and modification according to the microenvironment of diseases have been shown to achieve effective treatment. Chemists are in pursuit of nanocatalysts that are more efficient, controllable, and less toxic by developing innovative synthetic technologies and improving existing ones. Recently, single-atom catalysts (SACs) with excellent catalytic activity and high selectivity have attracted increasing attention because of their accurate design as nanomaterials at the atomic level, thereby highlighting their potential for nanomedical applications. In this review, the recent advances in nanocatalysts and SACs are briefly summarized according to their synthesis, characterizations, catalytic mechanisms, and nanomedical applications. The opportunities and future scope for their development and the issues and challenges for their application as nanomedicine are also discussed. As far as it is known, the review is the systematic comparison of nanocatalysts and SACs, especially in the field of nanomedicine, which has promoted the development of nanocatalytic medicine.

Sacrificial Synthesis of Supported Ru Single Atoms and Clusters on N-doped Carbon Derived from Covalent Triazine Frameworks: A Charge Modulation Approach

High-temperature pyrolysis of nitrogen (N)-rich, crystalline porous organic architectures in the presence of a metal precursor is an important chemical process in heterogeneous catalysis for the fabrication of highly porous N-carbon-supported metal catalysts. Herein, covalent triazine framework (CTF) and CTF-I (that is, CTF after charge modulation with iodomethane) are presented as sacrificial templates, for the synthesis of carbon-supported Ru catalysts-Ru-CTF-900 and Ru-CTF-I-900 respectively, following high-temperature pyrolysis at 900 °C under N2 atmosphere. Predictably, the dispersed Ru on pristine CTF carrier suffered severe sintering of the Ru nanoparticles (NPs) during heat treatment at 900 °C. However, the Ru-CTF-I-900 catalyst is composed of ultra-small Ru NPs and abundant Ru single atoms which may have resulted from much stronger Ru-N interactions. Through modification of the micro-environment within the CTF architecture, Ru precursor interacted on charged-modulated CTF framework shows electrostatic repulsion and steric hindrance, thus contributing toward the high density of single Ru atoms and even smaller Ru NPs after pyrolysis. A Ru-Ru coordination number of only 1.3 is observed in the novel Ru-CTF-I-900 catalyst, which exhibits significantly higher catalytic activity than Ru-CTF-900 for transfer hydrogenation of acetophenone.

Recent developments of nanocatalyzed liquid-phase hydrogen generation

Hydrogen is the most effective and sustainable carrier of clean energy, and liquid-phase hydrogen storage materials with high hydrogen content, reversibility and good dehydrogenation kinetics are promising in view of "hydrogen economy". Efficient, low-cost, safe and selective hydrogen generation from chemical storage materials remains challenging, however. In this Review article, an overview of the recent achievements is provided, addressing the topic of nanocatalysis of hydrogen production from liquid-phase hydrogen storage materials including metal-boron hydrides, borane-nitrogen compounds, and liquid organic hydrides. The state-of-the-art catalysts range from high-performance nanocatalysts based on noble and non-noble metal nanoparticles (NPs) to emerging single-atom catalysts. Key aspects that are discussed include insights into the dehydrogenation mechanisms, regenerations from the spent liquid chemical hydrides, and tandem reactions using the in situ generated hydrogen. Finally, challenges, perspectives, and research directions for this area are envisaged.

Rhodium single-atom catalysts with enhanced electrocatalytic hydrogen evolution performance

Rhodium (Rh) single-atom catalysts supported on activated carbon (Rh₁/AC) are prepared via a “top-down” chemical reaction-induced dispersion process and show outstanding electrocatalytic performance for the hydrogen evolution reaction.

Single-Atom Catalysts across the Periodic Table

Isolated atoms featuring unique reactivity are at the heart of enzymatic and homogeneous catalysts. In contrast, although the concept has long existed, single-atom heterogeneous catalysts (SACs) have only recently gained prominence. Host materials have similar functions to ligands in homogeneous catalysts, determining the stability, local environment, and electronic properties of isolated atoms and thus providing a platform for tailoring heterogeneous catalysts for targeted applications. Within just a decade, we have witnessed many examples of SACs both disrupting diverse fields of heterogeneous catalysis with their distinctive reactivity and substantially enriching our understanding of molecular processes on surfaces. To date, the term SAC mostly refers to late transition metal-based systems, but numerous examples exist in which isolated atoms of other elements play key catalytic roles. This review provides a compositional encyclopedia of SACs, celebrating the 10th anniversary of the introduction of this term. By defining single-atom catalysis in the broadest sense, we explore the full elemental diversity, joining different areas across the whole periodic table, and discussing historical milestones and recent developments. In particular, we examine the coordination structures and associated properties accessed through distinct single-atom-host combinations and relate them to their main applications in thermo-, electro-, and photocatalysis, revealing trends in element-specific evolution, host design, and uses. Finally, we highlight frontiers in the field, including multimetallic SACs, atom proximity control, and possible applications for multistep and cascade reactions, identifying challenges, and propose directions for future development in this flourishing field.

Photocatalytic H2 Evolution from Ammonia Borane: Improvement of Charge Separation and Directional Charge Transmission

Co/M^II Fe layered double hydroxide (LDH) LDH photocatalysts have been designed from the aspect of employing stable half-filled Fe³⁺ to trap photogenerated electrons, adjusting the M^II -O-Fe oxo-bridged structure to optimize the short-range directional charge transmission and intercalating oxometallate anions into the LDH to further improve light absorption along with electron-hole separation and non-noble metal Co NP loading and reduction to form a heterojunction. These LDH-based photocatalysts are employed for photocatalytic H₂ evolution from ammonia borane in aqueous solution under visible light at 298 K. The photocatalytic H₂ evolution activity is greatly improved through adjustment of the M^II -O-Fe oxo-bridged structure and molybdate intercalation into the LDH. Turnover frequencies of up to 113.2 min^-1 are achieved with Co/CoFe-Mo. Alongside the experimental results and materials characterization, capture experiments and in situ DRIFTS analysis are carried out to study the photocatalytic hydrogen production mechanism.

Defect-Rich Co-CoOx -Graphene Nanocatalysts for Efficient Hydrogen Production from Ammonia Borane

Chemical hydrogen storage ammonia borane has attracted extensive attention as a method of efficient utilization of hydrogen energy. The high-efficiency catalysts are the main factor restricting the hydrogen production of ammonia borane. In this paper, the synergistic effect of Co and CoO_x supported on graphene (named Co-CoO_x @GO-II) promotes the efficient hydrogen production of ammonia borane, and its catalytic hydrogen production rate can reach 5813 mL min^-1  g_Co ^-1 at 298 K, the corresponding TOF is 15.33 min^-1 . After five stability tests, Co-CoO_x @GO-II maintained 65% of its original catalytic performance. The synergy of metal and metal oxide and the defects in the atomic arrangement ensure the catalytic activity, the large specific surface area of graphene ensures the dispersion and fixation. This strategy may provide a possibility to design high-performance transition metal catalysts.

An experimental approach for controlling confinement effects at catalyst interfaces

Catalysts are conventionally designed with a focus on enthalpic effects, manipulating the Arrhenius activation energy. This approach ignores the possibility of designing materials to control the entropic factors that determine the pre-exponential factor. Here we investigate a new method of designing supported Pt catalysts with varying degrees of molecular confinement at the active site. Combining these with fast and precise online measurements, we analyse the kinetics of a model reaction, the platinum-catalysed hydrolysis of ammonia borane. We control the environment around the Pt particles by erecting organophosphonic acid barriers of different heights and at different distances. This is done by first coating the particles with organothiols, then coating the surface with organophosphonic acids, and finally removing the thiols. The result is a set of catalysts with well-defined "empty areas" surrounding the active sites. Generating Arrhenius plots with >300 points each, we then compare the effects of each confinement scenario. We show experimentally that confining the reaction influences mainly the entropy part of the enthalpy/entropy trade-off, leaving the enthalpy unchanged. Furthermore, we find this entropy contribution is only relevant at very small distances (<3 Å for ammonia borane), where the "empty space" is of a similar size to the reactant molecule. This suggests that confinement effects observed over larger distances must be enthalpic in nature.

Facile Fabrication of Rhodium/Nanodiamond Hybrid as Advanced Catalyst toward Hydrogen Production from Ammonia–Borane

Hydrogen generation through ammonia–borane (AB) hydrolysis has been regarded as one of the most promising pathways to tap renewable green energy. The design and synthesis of highly effective catalysts toward hydrogen production from aqueous AB is of paramount significance. Here, the facile synthesis of Rh nanoparticles (NPs) immobilized on nanodiamond (nano-DA) and concomitant AB hydrolysis to produce hydrogen was successfully achieved. The in situ generated Rh/nano-DA exhibited excellent catalytic activity toward AB hydrolysis, with a high turnover frequency (TOF) value of 729.4 min−1 at 25 °C and a low activation energy of 25.6 kJ mol−1. Moreover, the catalyst could be reused four times. The unique properties of DA with abundant oxygen-containing groups enable the homogeneous distribution of small and surface-clean Rh NPs on the nano-DA surface, which can supply abundant accessible active sites for hydrogen evolution from AB hydrolysis. This study demonstrated that nano-DA can be applied as an ideal matrix to deposit efficient Rh nanocatalyst toward hydrogen evolution reaction.

Recent Advances in Noble Metal Catalysts for Hydrogen Production from Ammonia Borane

Interest in chemical hydrogen storage has increased, because the supply of fossil fuels are limited and the harmful effects of burning fossil fuels on the environment have become a focus of public concern. Hydrogen, as one of the energy carriers, is useful for the sustainable development. However, it is widely known that controlled storage and release of hydrogen are the biggest barriers in large-scale application of hydrogen energy. Ammonia borane (NH3BH3, AB) is deemed as one of the most promising hydrogen storage candidates on account of its high hydrogen to mass ratio and environmental benignity. Development of efficient catalysts to further improve the properties of chemical kinetics in the dehydrogenation of AB under appropriate conditions is of importance for the practical application of this system. In previous studies, a variety of noble metal catalysts and their supported metal catalysts (Pt, Pd, Au, Rh, etc.) have presented great properties in decomposing the chemical hydride to generate hydrogen, thus, promoting their application in dehydrogenation of AB is urgent. We analyzed the hydrolysis of AB from the mechanism of hydrogen release reaction to understand more deeply. Based on these characteristics, we aimed to summarize recent advances in the development of noble metal catalysts, which had excellent activity and stability for AB dehydrogenation, with prospect towards realization of efficient noble metal catalysts.

Surface engineering of earth-abundant Fe catalysts for selective hydrodeoxygenation of phenolics in liquid phase

Tailoring the graphene-covered Fe with Cs modifies the surface electronic properties of the catalysts such that selective C–O bond cleavage of phenol is achieved in liquid phase by inhibiting the facile tautomerization followed by ring saturation.

Development of inexpensive sulfur-free catalysts for selective hydrogenolysis of the C–O bond in phenolics (i.e., selective removal of oxygen without aromatic ring saturation) under liquid-phase conditions is highly challenging. Here, we report an efficient approach to engineer earth-abundant Fe catalysts with a graphene overlayer and alkali metal (i.e., Cs), which produces arenes with 100% selectivity from liquid-phase hydrodeoxygenation (HDO) of phenolics with high durability. In particular, we report that a thin (a few layers) surface graphene overlayer can be engineered on metallic Fe particles (G@Fe) by a controlled surface reaction of a carbonaceous compound, which prevents the iron surface from oxidation by hydroxyls or water produced during HDO reaction. More importantly, further tailoring the surface electronic properties of G@Fe with the addition of cesium, creating a Cs-G@Fe composite catalyst in contrast to a deactivated Cs@Fe one, promotes the selective C–O bond cleavage by inhibiting the tautomerization, a pathway that is very facile under liquid-phase conditions. The current study could open a general approach to rational design of highly efficient catalysts for HDO of phenolics.

Highly efficient hydrogen production from hydrolysis of ammonia borane over nanostructured Cu@CuCoOx supported on graphene oxide

Designing highly efficient and cheap nanocatalysts for room-temperature hydrolysis of ammonia borane (AB) is of great significance for their real application in hydrogen (H₂)-based fuel cells. Here, we report a kind of noble metal (NM)-free hybrid nanocatalysts composed of heterostructured Cu@CuCoO_x nanoparticles and a graphene oxide support (denoted as Cu@CuCoO_x@GO) and demonstrate their high catalytic performance toward the hydrolysis of AB. By rationally controlling synthetic parameters, we find that optimum Cu_0.3@Cu_0.7CoO_x@GO achieves a superior catalytic activity with a turnover frequency of 44.6 mol_H2 mol_M^-1 min^-1 in H₂O and 98.2 mol_H2 mol_M^-1 min^-1 in 0.2 M NaOH, better than most of previously reported NM-free nanocatalysts. This catalyst also discloses a very low activation energy (E_a) of 35.4 kJ mol^-1. The studies on catalytic kinetics and isotopic experiments attribute the high activity to synergistically structural and compositional advantages of Cu_0.3@Cu_0.7CoO_x@GO, which kinetically accelerates the oxidative cleavage of OH bond in attacked H₂O (the rate-determining step of the hydrolysis of AB). This study thus provides an opportunity for rational design of cheap NM-free nanocatalysts for H₂ production from chemical H₂-storage materials.

Boron: Its Role in Energy-Related Processes and Applications

Boron's unique position in the Periodic Table, that is, at the apex of the line separating metals and nonmetals, makes it highly versatile in chemical reactions and applications. Contemporary demand for renewable and clean energy as well as energy-efficient products has seen boron playing key roles in energy-related research, such as 1) activating and synthesizing energy-rich small molecules, 2) storing chemical and electrical energy, and 3) converting electrical energy into light. These applications are fundamentally associated with boron's unique characteristics, such as its electron-deficiency and the availability of an unoccupied p orbital, which allow the formation of a myriad of compounds with a wide range of chemical and physical properties. For example, boron's ability to achieve a full octet of electrons with four covalent bonds and a negative charge has led to the synthesis of a wide variety of borate anions of high chemical and electrochemical stability-in particular, weakly coordinating anions. This Review summarizes recent advances in the study of boron compounds for energy-related processes and applications.

Noble-metal-free nanocatalysts for hydrogen generation from boron- and nitrogen-based hydrides

We focus on the recent advances in non-noble metal catalyst design, synthesis and applications in dehydrogenation of chemical hydrides (e.g. NaBH₄, NH₃BH₃, NH₃, N₂H₄, N₂H₄BH₃) due to their high hydrogen contents and CO-free H₂ production.

Expedient synthesis of E-hydrazone esters and 1H-indazole scaffolds through heterogeneous single-atom platinum catalysis

Unprotected E-hydrazone esters are prized building blocks for the preparation of 1H-indazoles and countless other N-containing biologically active molecules. Despite previous advances, efficient and stereoselective synthesis of these compounds remains nontrivial. Here, we show that Pt single atoms anchored on defect-rich CeO₂ nanorods (Pt₁/CeO₂), in conjunction with the alcoholysis of ammonia borane, promotes exceptionally E-selective hydrogenation of α-diazoesters to afford a wide assortment of N-H hydrazone esters with an overall turnover frequency of up to 566 hours^-1 upon reaction completion. The α-diazoester substrates could be generated in situ from readily available carboxylic esters in one-pot hydrogenation reaction. Utility is demonstrated through concise, scalable synthesis of 1H-indazole-derived pharmaceuticals and their ¹⁵N-labeled analogs. The present protocol highlights a key mechanistic nuance wherein simultaneous coordination of a Pt site with the diazo N═N and ester carbonyl motifs plays a central role in controlling stereoselectivity, which is supported by density functional theory calculations.