Mild, Redox-Neutral Formylation of Aryl Chlorides through the Photocatalytic Generation of Chlorine Radicals

Photoinduced HCl-Mediated Cross-Dehydrogenative Coupling of Quinolines with Alcohols and Ethers

Via light irradiation, cross-dehydrogenative coupling of quinolines with alcohols and ethers was achieved under mild conditions. A stoichiometric amount of HCl and room temperature were necessary to promote the reaction. A green Minisci-type cross-dehydrogenative coupling reaction was performed without an oxidant or a transition-metal catalyst.

Strategies and Mechanisms of First-Row Transition Metal-Regulated Radical C-H Functionalization

Radical C-H functionalization represents a useful means of streamlining synthetic routes by avoiding substrate preactivation and allowing access to target molecules in fewer steps. The first-row transition metals (Ti, V, Cr, Mn, Fe, Co, Ni, and Cu) are Earth-abundant and can be employed to regulate radical C-H functionalization. The use of such metals is desirable because of the diverse interaction modes between first-row transition metal complexes and radical species including radical addition to the metal center, radical addition to the ligand of metal complexes, radical substitution of the metal complexes, single-electron transfer between radicals and metal complexes, hydrogen atom transfer between radicals and metal complexes, and noncovalent interaction between the radicals and metal complexes. Such interactions could improve the reactivity, diversity, and selectivity of radical transformations to allow for more challenging radical C-H functionalization reactions. This review examines the achievements in this promising area over the past decade, with a focus on the state-of-the-art while also discussing existing limitations and the enormous potential of high-value radical C-H functionalization regulated by these metals. The aim is to provide the reader with a detailed account of the strategies and mechanisms associated with such functionalization.

Light-induced ligand-to-metal charge transfer of Fe(III)-OR species in organic synthesis

Light-induced ligand-to-metal charge transfer (LMCT) has been utilized as a powerful strategy in various organic reactions. First-row transition metals, especially iron complexes, show good applications in this process. Fe(III)-Cl and Fe(III)-OR species are two key intermediates involved in the LMCT of iron complexes. This review highlights studies on LMCT of Fe(III)-OR species, including carboxylate-iron and alkoxy-iron species, in organic transformations. Reaction conditions, substrate scope and related mechanisms are discussed.

Photoinduced Ligand-to-Metal Charge Transfer in Base-Metal Catalysis

The absorption of light by photosensitizers has been shown to offer novel reactive pathways through electronic excited state intermediates, complementing ground state mechanisms. Such strategies have been applied in both photocatalysis and photoredox catalysis, driven by generating reactive intermediates from their long-lived excited states. One developing area is photoinduced ligand-to-metal charge transfer (LMCT) catalysis, in which coordination of a ligand to a metal center and subsequent excitation with light results in the formation of a reactive radical and a reduced metal center. This mini review concerns the foundations and recent developments in ligand-to-metal charge transfer in transition metal catalysis focusing on the organic transformations made possible through this mechanism.

Nickel/photoredox-catalyzed three-component silylacylation of acrylates via chlorine photoelimination

The extensive utility of organosilicon compounds across a wide range of disciplines has sparked significant interest in their efficient synthesis. Although catalytic 1,2-silyldifunctionalization of alkenes provides a promising method for the assembly of intricate organosilicon frameworks with atom and step economy, its advancement is hindered by the requirement of an external hydrogen atom transfer (HAT) agent in photoredox catalysis. Herein, we disclose an efficient three-component silylacylation of α,β-unsaturated carbonyl compounds, leveraging a synergistic nickel/photoredox catalysis with various hydrosilanes and aroyl chlorides. This method enables the direct conversion of acrylates into valuable building blocks that contain both carbonyl and silicon functionalities through a single, redox-neutral process. Key to this reaction is the precise activation of the Si-H bond, achieved through chlorine radical-induced HAT, enabled by the photoelimination of a Ni-Cl bond. Acyl chlorides serve a dual role, functioning as both acylating agents and chloride donors. Our methodology is distinguished by its mild conditions and extensive substrate adaptability, significantly enhancing the late-stage functionalization of pharmaceuticals.

Generation of New Synthons for Synthesis Through Activation of Nitromethane

Nitromethane is used as a common solvent, stabilizer, and fuel additive. Nitromethane has also been used as a sustainable building block and convenient reagent in chemical synthesis. In this Minireview, we summarize the recent advances in activation of nitromethane, using nitromethane as the source of cyano group, nitrogen, methylamine, formyl group, C1, nitroso, and oxime.

Photoredox/Nickel Dual Catalysis-Enabled Aryl Formylation with 2,2-Dimethoxy-N,N-dimethylethan-1-amine as CO Source

Herein, a dual photoredox/nickel catalyzed formylation of aryl bromide with commercially available 2,2-dimethoxy-N,N-dimethylethan-1-amine as an effective CO source has been successfully achieved, delivering a series of aromatic aldehydes in moderate to good yields. Compared with the traditional reductive carbonylation process, this newly designed synthetic protocol provides a straightforward toolbox to access aromatic aldehydes, obviating the use of carbon monoxide and stoichiometric reductants. Finally, the utility of this direct formylation reaction was demonstrated in the pharmaceutical analogue synthesis.

Solvent-Controllable C-F Bond Activation for Masked Formylation of α-Trifluoromethyl Alkenes via Organo-Photoredox Catalysis

A solvent-controllable organo-photoredox-catalyzed C-F bond activation for masked formylation of α-trifluoromethyl alkenes with low-priced 1,3-dioxolane as masked formyl radical equivalent has been described. Consequently, a diversity of masked formylated gem-difluoroalkenes and monofluoroalkenes are constructed in moderate to high yields. This approach merits readily available starting materials, mild reaction conditions, and broad substrate scope. The feasibility of this approach has been highlighted by the one-pot masked formylation/hydrolysis sequence to form γ,γ-difluoroallylic aldehydes and late-stage modification of pharmaceutical and natural product derivatives.

Visible-Light-Induced Hydrogen Atom Transfer En Route to Exocylic Alkenylation of Cyclic Ethers Enabled by Electron Donor-Acceptor Complex

An electron donor-acceptor (EDA)-triggered hydrogen atom transfer (HAT) process is developed for the efficient generation of an α-alkoxy radical from cyclic ethers to synthesize exocyclic alkenylated ethers with exclusive E-selectivity. A judiciously chosen donor-acceptor pair (DABCO and maleimide) serves as the desired HAT reagent under visible light irradiation without using any photocatalyst or peroxide. A wide variety of substrates were explored to demonstrate the diverse applicability and practical viability of this cross-dehydrogenative transformation. Detailed mechanistic studies revealed a radical reaction pathway under the oxidative environment.

Visible-Light-Enabled Lanthanum-Mediated Intramolecular Epoxy-Ring Opening/Dehydrogenative Lactonization

Catalytic C(sp3)-H functionalization has afforded great opportunities to prepare organic substances, facilitating the derivatization of complex drugs and natural molecules. This letter describes an efficient and practical protocol for lanthanum-catalyzed continuous epoxy-ring opening and oxidative dehydrogenative lactonization under visible-light irradiation. Notably, the lanthanum catalyst also acts as a photocatalyst while acting as a Lewis acid in this reaction; therefore, no additional photocatalyst is required. We can conveniently prepare a series of diverse isochromanones with oxygen-containing spirocyclic structural units under a balloon-oxygen atmosphere at room temperature. Mechanistic studies and control experiments reveal that the in situ-generated lanthanum bromide should be crucial in the reaction.

Recent Advances On Direct Formylation Reactions

Aldehydes serve as the key functional group in organic synthesis and are valuable intermediates. The various advanced methods of direct formylation reactions have been reviewed in this article. Overcoming the drawbacks of the traditional methods of formylation, newer methods involving homo and heterogenous catalysts, one pot reactions, solvent free techniques are elaborated, which can be performed under mild conditions and using inexpensive resources.

Direct C(sp3)-H Acylation by Mechanistically Controlled Ni/Ir Photoredox Catalysis

ConspectusSynthetic chemists have consistently aimed to develop efficient methods for synthesizing ketones, which are essential building blocks in organic chemistry and play significant roles in bioactive molecules. Recent efforts have focused on using photoredox catalysis, which enables previously inaccessible activation modes, to synthesize ketones through the cross-coupling of an acyl electrophile and simple C(sp3)-H bonds. Over the past few years, we have worked on developing effective and versatile approaches for directly acylating activated hydrocarbons to forge ketones.Initially, thioesters were explored as the acyl source to achieve the direct acylation of ethers, but an unexpected thioesterification reaction was observed instead. To gain insights into this reactivity, we conducted the optimization of reaction conditions, substrate scope evaluation, and mechanistic studies. Drawing from our understanding of Ni/Ir photocatalysis obtained in this study, we subsequently developed a method for the direct acylation of simple hydrocarbons. The use of less-reactive amides as the acyl electrophiles was found to be critical for suppressing undesired pathways. This seemingly counterintuitive reactivity was carefully studied, revealing a substrate-assisted reaction mechanism in which the suppressed oxidative addition leads to early-stage nickel oxidation and C-H activation.To address the drawbacks of this method, which primarily arose from decarbonylative and transmetallative side pathways, we employed N-acyllutidiniums as the acyl electrophile. This prevented undesired decomposition pathways, enabling the use of α-chiral acyl substrates with the retention of their stereochemistry, particularly those derived from α-amino acids. The developed versatile methodology allowed us to access a diverse range of α-amino ketones and their homologues.Despite the elegant utility of Ni/photoredox catalysis in developing new synthetic methodologies, the precise behavior of nickel catalysts under redox conditions is incompletely understood. To gain insight into this behavior and develop new chemical reactions, we used a combination of experimental and computational methods. Our investigations revealed that devised adjustments to the reaction conditions in nickel/photoredox catalysis can result in significant differences in the reaction outcomes, providing chemists with opportunities to tailor reactions through carefully designed mechanistic strategies. We believe that continued efforts to study and apply nickel redox modulation will lead to the discovery of additional organic transformations.

The mechanism of visible light-induced C-C cross-coupling by Csp3-H bond activation

Csp3-C cross-coupling by activating Csp3-H bonds is a dream reaction for the chemical community, and visible light-induced transition metal-catalysis under mild reaction conditions is considered a powerful tool to achieve it. Advancement of this research area is still in its infancy because of the chemical and technical complexity of this catalysis. Mechanistic studies illuminating the operative reaction pathways can rationalize the increasing amount of experimental catalysis data and provide the knowledge allowing faster and rational advances in the field. This goal requires complementary experimental and theoretical mechanistic studies, as each of them is unfit to clarify the operative mechanisms alone. In this tutorial review we summarize representative experimental and computational mechanistic studies, highlighting weaknesses, strengths, and synergies between the two approaches.

Photoredox catalysis harvesting multiple photon or electrochemical energies

Photoredox catalysis (PRC) is a cutting-edge frontier for single electron-transfer (SET) reactions, enabling the generation of reactive intermediates for both oxidative and reductive processes via photon activation of a catalyst. Although this represents a significant step towards chemoselective and, more generally, sustainable chemistry, its efficacy is limited by the energy of visible light photons. Nowadays, excellent alternative conditions are available to overcome these limitations, harvesting two different but correlated concepts: the use of multi-photon processes such as consecutive photoinduced electron transfer (conPET) and the combination of photo- and electrochemistry in synthetic photoelectrochemistry (PEC). Herein, we review the most recent contributions to these fields in both oxidative and reductive activations of organic functional groups. New opportunities for organic chemists are captured, such as selective reactions employing super-oxidants and super-reductants to engage unactivated chemical feedstocks, and scalability up to gram scales in continuous flow. This review provides comparisons between the two techniques (multi-photon photoredox catalysis and PEC) to help the reader to fully understand their similarities, differences and potential applications and to therefore choose which method is the most appropriate for a given reaction, scale and purpose of a project.

Hydrotrifluoroacetylation of Alkenes via Designer Masked Acyl Reagents

Because of its impressive ability to promote pharmaceutical activity, the introduction of trifluoromethylacyl (CF₃CO) functionality into organic compounds has become an important and growing research area. Although various protocols have been developed to access trifluoroketones, the use of trifluoroacetyl radicals remains virtually undeveloped. Herein, we disclose a novel method for trifluoroacetylation through an umpolung reagent, thereby transforming an electrophilic radical into a nucleophilic radical. The applicability of this transformation is highlighted by large-scale, late-stage reactions of complex bioactive molecules sclareolide and loratadine. Furthermore, the direct transformation of trifluoromethyl ketones into various fluorinated analogues illustrates the potential synthetic application of our developed method.

Site- and Stereoselective Synthesis of Alkenyl Chlorides by Dual Functionalization of Internal Alkynes via Photoredox/Nickel Catalysis

Herein, we report a redox-neutral and atom-economical protocol to synthesize valuable alkenyl chlorides from unactivated internal alkynes and abundant organochlorides via photoredox and nickel catalysis. This protocol enables the site- and stereoselective addition of organochlorides to alkynes via chlorine photoelimination-initiated sequential hydrochlorination/remote C-H functionalization. The protocol is compatible with a wide range of medicinally relevant heteroaryl, aryl, acid, and alkyl chlorides for efficiently producing γ-functionalized alkenyl chlorides, exhibiting excellent regioselectivities and stereoselectivities. Late-stage modifications and synthetic manipulations of the products and preliminary mechanistic studies are also presented.

Enantioselective C(sp3)-H Functionalization of Oxacycles via Photo-HAT/Nickel Dual Catalysis

The selective functionalization of ubiquitous but inert C-H bonds is highly appealing in synthetic chemistry, but the direct transformation of hydrocarbons lacking directing groups into high-value chiral molecules remains a formidable challenge. Herein, we develop an enantioselective C(sp³)-H functionalization of undirected oxacycles via photo-HAT/nickel dual catalysis. This protocol provides a practical platform for the rapid construction of high-value and enantiomerically enriched oxacycles directly from simple and abundant hydrocarbon feedstocks. The synthetic utility of this strategy is further demonstrated in the late-stage functionalization of natural products and the synthesis of many pharmaceutically relevant molecules. Experimental and density functional theory calculation studies provide detailed insights into the mechanism and the origin of enantioselectivity for the asymmetric C(sp³)-H functionalization.

Minisci reaction of heteroarenes and unactivated C(sp3)-H alkanes via a photogenerated chlorine radical

Here, an efficient Minisci reaction of heteroarenes and unactivated C(sp³)-H alkanes was achieved using an inexpensive FeCl₃ as a photocatalyst. The photogenerated chlorine radical contributed to the HAT of C-H and subsequently initiated this reaction. Surprisingly, salt water and even seawater can act as a chlorine radical source, which provided an enlightening idea for future organic synthesis methods.

Light-Promoted Nickel-Catalyzed C-O/C-N Coupling of Aryl Halides with Carboxylic Acids and Sulfonamides

A general strategy for the construction of dual-functional carbon-heteroatom bonds has been developed via a light-promoted nickel catalytic system. Employing a simple NiBr₂ as the catalyst without any exogeneous ligands and photosensitizers, a variety of esters and sulfonamide N-arylation derivatives, including celecoxib- and glimepiride-derived sulfonamides, were readily accessed with high functional group tolerance and high efficiency. Moreover, the UV-vis absorption spectrum and free radical trapping experiments aimed at revealing the mechanism of the reaction are also presented.

Visible Light-Induced Cross-Dehydrocoupling of 3-Cyanocoumarins with Unactivated Aliphatic Aldehydes Enables Access to 4-Acylated Coumarins

We report visible light-induced cross-dehydrocoupling of 3-cyanocoumarins with unactivated aliphatic aldehydes for the direct synthesis of 4-acylated coumarins. Inexpensive and readily available (n-Bu)₄NBr was used as a precursor of the hydrogen atom transfer (HAT) catalyst and [Ir(ppy)₂(dtbbpy)PF₆] as a photocatalyst. A variety of aldehydes including linear, branched, cyclic, and α,β-unsaturated aliphatic aldehydes were suitable for this reaction yielding the desired acylated coumarin derivatives in 41-98% yields. This method provides a mild, atom-economical, and environmentally friendly synthetic route for the direct acylation of 3-cyanocoumarins. This is the first example so far of C-4 aliphatic acylation of coumarins.

Photocatalytic Late-Stage C-H Functionalization

The emergence of modern photocatalysis, characterized by mildness and selectivity, has significantly spurred innovative late-stage C-H functionalization approaches that make use of low energy photons as a controllable energy source. Compared to traditional late-stage functionalization strategies, photocatalysis paves the way toward complementary and/or previously unattainable regio- and chemoselectivities. Merging the compelling benefits of photocatalysis with the late-stage functionalization workflow offers a potentially unmatched arsenal to tackle drug development campaigns and beyond. This Review highlights the photocatalytic late-stage C-H functionalization strategies of small-molecule drugs, agrochemicals, and natural products, classified according to the targeted C-H bond and the newly formed one. Emphasis is devoted to identifying, describing, and comparing the main mechanistic scenarios. The Review draws a critical comparison between established ionic chemistry and photocatalyzed radical-based manifolds. The Review aims to establish the current state-of-the-art and illustrate the key unsolved challenges to be addressed in the future. The authors aim to introduce the general readership to the main approaches toward photocatalytic late-stage C-H functionalization, and specialist practitioners to the critical evaluation of the current methodologies, potential for improvement, and future uncharted directions.

Pairing Iron and Nickel Catalysis for Electrochemical Esterification of Aryl Halides with Carbazates

We report an electrocatalytic approach for esterification of aryl halides by pairing iron and nickel electrocatalysis. The reaction involves anodically iron-catalyzed oxidation of carbazates to produce alkoxycarbonyl radicals. The carbon-centered radicals then enter nickel catalysis that is powered by cathodic reduction to deliver the radical coupling products. Mechanistic data are consistent with arylnickel(II) species as the key intermediates enabling the desired carbon-carbon bond formation.

Synthesis of a Bench-Stable Manganese(III) Chloride Compound: Coordination Chemistry and Alkene Dichlorination

The complex [MnCl₃(OPPh₃)₂] (1) is a bench-stable and easily prepared source of MnCl₃. It is prepared by treating acetonitrile solvated MnCl₃ (2) with Ph₃PO and collecting the resulting blue precipitate. 1 is useful in coordination reactions by virtue of the labile Ph₃PO ligands, and this is demonstrated through the synthesis of {Tpm*}MnCl₃ (3). In addition, methodologies in synthesis that rely on difficult or cumbersome to prepare solutions of reactive MnCl₃ can be accomplished using 1 instead. This is demonstrated through alkene dichlorinations in a wide range of solvents, open to air, and with good substrate scope. Light-accelerated halogenation and radical sensitive experiments support a radical mechanism involving stepwise Cl-atom transfer(s) from 1.

Photoredox Catalyzed Thioformylation of Terminal Alkynes Using Nitromethane as a Formyl Source

A photoredox thioformylation of terminal alkynes using nitromethane as a formyl anion equivalent, thereby leading to the synthesis of (E)-1,2-difunctionalized acrylaldehyde, has been described. The current strategy introduces an adaptable aldehyde function across an alkyne and offers a new route to synthesizing α-alkyl/aryl aldehydes.

Conformational Flexibility as a Tool for Enabling Site-Selective Functionalization of Unactivated sp3 C-O Bonds in Cyclic Acetals

A dual catalytic manifold that enables site-selective functionalization of unactivated sp³ C–O bonds in cyclic acetals with aryl and alkyl halides is reported. The reaction is triggered by an appropriate σ*–p orbital overlap prior to sp³ C–O cleavage, thus highlighting the importance of conformational flexibility in both reactivity and site selectivity. The protocol is characterized by its excellent chemoselectivity profile, thus offering new vistas for activating strong σ sp³ C–O linkages.

Radical C(sp3)-H functionalization and cross-coupling reactions

C─H functionalization reactions are playing an increasing role in the preparation and modification of complex organic molecules, including pharmaceuticals, agrochemicals, and polymer precursors. Radical C─H functionalization reactions, initiated by hydrogen-atom transfer (HAT) and proceeding via open-shell radical intermediates, have been expanding rapidly in recent years. These methods introduce strategic opportunities to functionalize C(sp3)─H bonds. Examples include synthetically useful advances in radical-chain reactivity and biomimetic radical-rebound reactions. A growing number of reactions, however, proceed via "radical relay" whereby HAT generates a diffusible radical that is functionalized by a separate reagent or catalyst. The latter methods provide the basis for versatile C─H cross-coupling methods with diverse partners. In the present review, highlights of recent radical-chain and radical-rebound methods provide context for a survey of emerging radical-relay methods, which greatly expand the scope and utility of intermolecular C(sp3)─H functionalization and cross coupling.

Photocatalytic C(sp3) radical generation via C-H, C-C, and C-X bond cleavage

C(sp³) radicals (R˙) are of broad research interest and synthetic utility. This review collects some of the most recent advancements in photocatalytic R˙ generation and highlights representative examples in this field. Based on the key bond cleavages that generate R˙, these contributions are divided into C–H, C–C, and C–X bond cleavages. A general mechanistic scenario and key R˙-forming steps are presented and discussed in each section.

C(sp³) radicals (R˙) are of broad research interest and synthetic utility.

Modular Access to Chiral α-(Hetero)aryl Amines via Ni/Photoredox-Catalyzed Enantioselective Cross-Coupling

Chiral α-aryl N-heterocycles are commonly found in natural products, pharmaceutical agents, and chiral catalysts but remain challenging to access via asymmetric catalysis. Herein, we report a general and modular approach for the direct enantioselective α-arylation of saturated azacycles and acyclic N-alkyl benzamides via nickel/photoredox dual catalysis. This process exploits the hydrogen atom transfer ability of photoeliminated chlorine radicals to convert azacycles to the corresponding α-amino alkyl radicals that then are coupled with ubiquitous and inexpensive (hetero)aryl chlorides. These coupling reactions require no oxidants or organometallic reagents, feature feedstock starting materials, a broad substrate scope, and high enantioselectivities, and are applicable to late-stage diversification of medicinally relevant complex molecules. Mechanistic studies suggest that the nickel catalyst uncommonly plays multiple roles, accomplishing chlorine radical generation, α-amino radical capture, cross-coupling, and asymmetric induction.

Mechanisms, Challenges, and Opportunities of Dual Ni/Photoredox-Catalyzed C(sp2)-C(sp3) Cross-Couplings

The merging of photoredox and nickel catalysis has revolutionized the field of C-C cross-coupling. However, in comparison to the development of synthetic methods, detailed mechanistic investigations of these catalytic systems are lagging. To improve the mechanistic understanding, computational tools have emerged as powerful tools to elucidate the factors controlling reactivity and selectivity in these complex catalytic transformations. Based on the reported computational studies, it appears that the mechanistic picture of catalytic systems is not generally applicable, but is rather dependent on the specific choice of substrate, ligands, photocatalysts, etc. Given the complexity of these systems, the need for more accurate computational methods, readily available and user-friendly dynamics simulation tools, and data-driven approaches is clear in order to understand at the molecular level the mechanisms of these transformations. In particular, we anticipate that such improvement of theoretical methods will become crucial to advance the understanding of excited-state properties and dynamics of key species, as well as to enable faster and unbiased exploration of reaction pathways. Further, with greater collaboration between computational, experimental, and spectroscopic communities, the mechanistic investigation of photoredox/Ni dual-catalytic reactions is expected to thrive quickly, facilitating the design of novel catalytic systems and promoting our understanding of the reaction selectivity.

Diverse synthesis of C2-linked functionalized molecules via molecular glue strategy with acetylene

As the simplest alkyne and an abundant chemical feedstock, acetylene is an ideal two-carbon building block. However, in contrast to substituted alkynes, catalytic methods to incorporate acetylene into fine chemicals are quite limited. Herein, we developed a photoredox-catalyzed synthetic protocol for diverse C2-linked molecules via a molecular glue strategy using gaseous acetylene under mild conditions. Initiated by addition of an acyl radical to acetylene, two cascade transformations follow. One involves a double addition for the formation of 1,4-diketones and the other where the intermediate vinyl ketone is intercepted by a radical formed from a heterocycle. In addition to making two new C-C bonds, two C-H bonds are also created in two mechanistically distinct ways: one via a C-H abstraction and the other via protonation. This system offers a reliable and safe way to incorporate gaseous acetylene into fine chemicals and expands the utility of acetylene in organic synthesis.

Although acetylene is an ideal two-carbon building block, very few catalytic methods can be applied to incorporate acetylene into fine chemicals. Here, the authors show photoredox-catalyzed syntheses of C2- linked molecules with gaseous acetylene under mild conditions.

Photoredox-Catalyzed C-H Functionalization Reactions

The fields of C-H functionalization and photoredox catalysis have garnered enormous interest and utility in the past several decades. Many different scientific disciplines have relied on C-H functionalization and photoredox strategies including natural product synthesis, drug discovery, radiolabeling, bioconjugation, materials, and fine chemical synthesis. In this Review, we highlight the use of photoredox catalysis in C-H functionalization reactions. We separate the review into inorganic/organometallic photoredox catalysts and organic-based photoredox catalytic systems. Further subdivision by reaction class─either sp2 or sp3 C-H functionalization─lends perspective and tactical strategies for use of these methods in synthetic applications.

Taming the Chlorine Radical: Enforcing Steric Control over Chlorine-Radical-Mediated C-H Activation

Chlorine radicals readily activate C-H bonds, but the high reactivity of these intermediates precludes their use in regioselective C-H functionalization reactions. We demonstrate that the secondary coordination sphere of a metal complex can confine photoeliminated chlorine radicals and afford steric control over their reactivity. Specifically, a series of iron(III) chloride pyridinediimine complexes exhibit activity for photochemical C(sp³)-H chlorination and bromination with selectivity for primary and secondary C-H bonds, overriding thermodynamic preference for weaker tertiary C-H bonds. Transient absorption spectroscopy reveals that Cl· remains confined through formation of a Cl·|arene complex with aromatic groups on the pyridinediimine ligand. Furthermore, photocrystallography confirms that this selectivity arises from the generation of Cl· within the steric environment defined by the iron secondary coordination sphere.

Photons or Electrons? A Critical Comparison of Electrochemistry and Photoredox Catalysis for Organic Synthesis

Redox processes are at the heart of synthetic methods that rely on either electrochemistry or photoredox catalysis, but how do electrochemistry and photoredox catalysis compare? Both approaches provide access to high energy intermediates (e.g., radicals) that enable bond formations not constrained by the rules of ionic or 2 electron (e) mechanisms. Instead, they enable 1e mechanisms capable of bypassing electronic or steric limitations and protecting group requirements, thus enabling synthetic chemists to disconnect molecules in new and different ways. However, while providing access to similar intermediates, electrochemistry and photoredox catalysis differ in several physical chemistry principles. Understanding those differences can be key to designing new transformations and forging new bond disconnections. This review aims to highlight these differences and similarities between electrochemistry and photoredox catalysis by comparing their underlying physical chemistry principles and describing their impact on electrochemical and photochemical methods.

HCl-Catalyzed Aerobic Oxidation of Alkylarenes to Carbonyls

The construction of C-O bonds through C-H bond functionalization remains fundamentally challenging. Here, a practical chlorine radical-mediated aerobic oxidation of alkylarenes to carbonyls was developed. This protocol employed commercially available HCl as a hydrogen atom transfer (HAT) reagent and air as a sustainable oxidant. In addition, this process exhibited excellent functional group tolerance and a broad substrate scope without the requirement for external metal and oxidants. The mechanistic hypothesis was supported by radical trapping, ¹⁸ O labeling, and control experiments.

Visible light-induced Ni-catalyzed C–heteroatom cross-coupling of aryl halides via LMCT with DBU to access a Ni(I)/Ni(III) cycle

Cross-coupling of aryl halides with nucleophiles is a synthetically attractive strategy to construct C–heteroatom bonds. Here we report a highly efficient photoinduced Ni-catalyzed method for the C–heteroatom cross-coupling of aryl...

Investigations into mechanism and origin of regioselectivity in the metallaphotoredox-catalyzed α-arylation of N-alkylbenzamides

A mechanistic study on the α-arylation of N-alkylbenzamides catalyzed by a dual nickel/photoredox system using aryl bromides is reported herein. This study elucidates the origins of site-selectivity of the transformation, which is controlled by the generation of a hydrogen atom transfer (HAT) agent by a photocatalyst and bromide ions in solution. Tetrabutylammonium bromide was identified as a crucial additive and source of a potent HAT agent, which led to increases in yields and a lowering of the stoichiometries of the aryl bromide coupling partner. NMR titration experiments and Stern–Volmer quenching studies provide evidence for complexation to and oxidation of bromide by the photocatalyst, while elementary steps involving deprotonation of the N-alkylbenzamide or 1,5-HAT were ruled out through mechanistic probes and kinetic isotope effect analysis. This study serves as a valuable tool to better understand the α-arylation of N-alkylbenzamides, and has broader implications in halide-mediated C–H functionalization reactions.

A mechanistic study of the α-arylation of N-alkylbenzamides catalyzed by a dual nickel/photoredox system using aryl bromides elucidates the origins of site-selectivity of the transformation and identifies the hydrogen atom transfer agent.