From Electron Crystallography to Single Particle CryoEM (Nobel Lecture)

Visualizing Dynamic Single Atom Catalysis

Many industrial chemical processes, including for producing fuels, foods, pharmaceuticals, chemicals and environmental controls, employ heterogeneous solid state catalysts at elevated temperatures in gas or liquid environments. Dynamic reactions at the atomic level play a critical role in catalyst stability and functionality. In situ visualization and analysis of atomic-scale processes in real time under controlled reaction environments can provide important insights into practical frameworks to improve catalytic processes and materials. This review focuses on innovative real time in situ electron microscopy (EM) methods, including recent progress in analytical in situ environmental (scanning) transmission EM (E(STEM), incorporating environmental scanning TEM (ESTEM) and environmental transmission EM (ETEM), with single atom resolution for visualizing and analysing dynamic single atom catalysis under controlled flowing gas reaction environments. ESTEM studies of single atom dynamics of reactions, and of sintering deactivation, contribute to a better-informed understanding of the yield and stability of catalyst operations. Advances in in situ technologies, including gas and liquid sample holders, nanotomography, and higher voltages, as well as challenges and opportunities in tracking reacting atoms, are highlighted. The findings show that the understanding and application of fundamental processes in catalysis can be improved, with valuable economic, environmental, and societal benefits.

Resonating Electrostatically Guided Electrons

An essential component for quantum-enhanced measurements with free electrons is an electron resonator. We report stable guiding of free electrons at 50 eV energy for up to seven round trips in a linear autoponderomotive guiding structure, which is realized with two microstructured printed circuit boards that generate the required electromagnetic fields. Free electrons are laser triggered from a sharp tungsten needle tip and coupled in at the front of the electron resonator with the help of sub-nanosecond-fast switchable electron mirrors. After a variable time delay, we open the rear electron mirror and measure the number of trapped electrons with a delay-line detector. We demonstrate, simulate, and show ways of optimizing an electron resonator in simulations, which will help enable "interaction-free" measurement setups, including multipass and quantum-Zeno effect based schemes, helping to realize the quantum electron microscope.

3D Nanocrystallography and the Imperfect Molecular Lattice

Crystallographic analysis relies on the scattering of quanta from arrays of atoms that populate a repeating lattice. While large crystals built of lattices that appear ideal are sought after by crystallographers, imperfections are the norm for molecular crystals. Additionally, advanced X-ray and electron diffraction techniques, used for crystallography, have opened the possibility of interrogating micro- and nanoscale crystals, with edges only millions or even thousands of molecules long. These crystals exist in a size regime that approximates the lower bounds for traditional models of crystal nonuniformity and imperfection. Accordingly, data generated by diffraction from both X-rays and electrons show increased complexity and are more challenging to conventionally model. New approaches in serial crystallography and spatially resolved electron diffraction mapping are changing this paradigm by better accounting for variability within and between crystals. The intersection of these methods presents an opportunity for a more comprehensive understanding of the structure and properties of nanocrystalline materials.

Investigation of the Efficacy of Lanthanoid Heavy Metal Acetates as Electron Staining Reagents for Biomembrane Vesicles

Transmission electron microscopy (TEM) has revolutionized our understanding of protein structures by enabling atomic-resolution visualization without the need for crystallography, thanks to advancements in cryo-TEM and single particle analysis methods. However, conventional electron microscopy remains relevant for studying stained samples, as it allows the practical determination of optimal conditions through extensive experimentation. TEM also facilitates the examination of supramolecular complexes encompassing proteins, lipids, and nucleic acids. In this study, we investigated the applicability of lanthanoid reagents as electron-staining alternatives to uranyl acetate, which is globally regulated as a nuclear fuel material. We focus on a model biomembrane vesicle system, the chromatophores from the purple photosynthetic eubacterium Rhodospirillum rubrum, which integrate proteins and lipids. Through density distribution analysis of electron micrographs, we evaluated the efficacy of various lanthanoid acetates and found that triacetates of neodymium, samarium, and gadolinium exhibited similar staining effectiveness to uranyl acetate. Additionally, triacetates of praseodymium, erbium, and lutetium, followed by europium show promising results as secondary candidates. Our findings suggest that lanthanoid transition heavy metal acetates could serve as viable alternatives for electron staining in TEM, offering potential advantages over uranyl acetate.

Detection of Lipid-Bound Bacteriorhodopsin Trimer Complex Directly from Purple Membrane by Native Mass Spectrometry

Native mass spectrometry (MS) was used to detect the membrane protein, bacteriorhodopsin (bR), in its 27 kDa monomeric form and trimeric assemblies directly from lipid-containing purple membranes (PMs) from the halophilic archaeon, Halobacterium salinarum. Trimer bR ion populations bound to lipid molecules were detected with n-octyl β-d-glucopyranoside as the solubilizing detergent; the use of octyl tetraethylene glycol monooctyl ether or n-dodecyl-β-d-maltopyranoside resulted in only detection of monomeric bR. The archaeal lipids phosphotidylglycerolphosphate methyl ester and 3-HSO3-Galp-β1,6-Manp-α1,2-Glcp-α1,1-sn-2,3-diphytanylglycerol were the only lipids in the PMs found to bind to bR, consistent with previous high-resolution structural studies. Removal of the lipids from the sample resulted in the detection of only the bR monomer, highlighting the importance of specific lipids for stabilizing the bR trimer. To the best of our knowledge, this is the first report of the detection of the bR trimer with resolved lipid-bound species by MS.

Electron counting detectors in scanning transmission electron microscopy via hardware signal processing

Transmission electron microscopy is a pivotal instrument in materials and biological sciences due to its ability to provide local structural and spectroscopic information on a wide range of materials. However, the electron detectors used in scanning transmission electron microscopy are often unable to provide quantified information, that is the number of electrons impacting the detector, without exhaustive calibration and processing. This results in arbitrary signal values with slow response times that cannot be used for quantification or comparison to simulations. Here we demonstrate and optimise a hardware signal processing approach to augment electron detectors to perform single electron counting.

Pulsed-beam transmission electron microscopy and radiation damage

We review the use of pulsed electron-beams in transmission electron microscopes (TEMs) for the purpose of mitigating specimen damage. We begin by placing the importance of TEMs with respect to materials characterization into proper context, and we provide a brief overview of established methods for reducing or eliminating the deleterious effects of beam-induced damage. We then introduce the concept of pulsed-beam TEM, and we briefly describe the basic methods and instrument configurations used to create so-called temporally structured electron beams. Following a brief overview of the use of high-dose-rate pulsed-electron beams in cancer radiation therapy, we review historical speculations and more recent compelling but mostly anecdotal findings of a pulsed-beam TEM damage effect. This is followed by an in-depth technical review of recent works seeking to establish cause-and-effect relationships, to conclusively uncover the presence of an effect, and to explore the practicality of the approach. These studies, in particular, provide the most compelling evidence to date that using a pulsed electron beam in the TEM is indeed a viable way to mitigate damage. Throughout, we point out current gaps in understanding, and we conclude with a brief perspective of current needs and future directions.

Electron irradiation effects in transmission electron microscopy: Random displacements and collective migrations

Electron beam damage in transmission electron microscopy (TEM) is complicated because the damage phenomena can be the result of random atomic displacements or collective migrations. The former is categorized as the primary beam effects and the latter is the secondary beam effects. The mechanisms for these two distinguishing atomic processes of damage are different. The primary beam effects can be caused by the mechanisms of knock-on and/or radiolysis, while the secondary effects must be driven by a field that is induced by electron irradiation. One such field has been identified to be the electric field produced by the accumulated charges due to the ejection of secondary and Auger electrons from the irradiated region. One convincing example is the electron irradiation-induced domain switch in ferroelectric materials, in which the collective cation displacements are driven by the induced electric field. A detailed interpretation is given in this review. The sintering of metal NPs under electron irradiation is a secondary beam effect and is most likely also caused by the induced electric fields. The interactions between the charged NP and substrate, and between charged NPs, result in NP motion. Interchanging atoms between NPs during the sintering may also be driven by the electric fields. Although many beam-damage phenomena in C nanotubes and layered materials, such as graphene, BN, and transition metal dichalcogenides, are caused by the primary beam effects and have been well studied experimentally and theoretically in the literature, some phenomena from the secondary beam effects have also been identified in this review. These phenomena are sensitive to electron current density, the shape and orientation of the specimen, and even the illumination mode (i.e., TEM or STEM). Unfortunately, the mechanisms responsible for these phenomena still need to be clarified.

Realizing the Full Potential of Advanced Microscopy Approaches for Interrogating Plant-Microbe Interactions

Microscopy has served as a fundamental tool for insight and discovery in plant-microbe interactions for centuries. From classical light and electron microscopy to corresponding specialized methods for sample preparation and cellular contrasting agents, these approaches have become routine components in the toolkit of plant and microbiology scientists alike to visualize, probe and understand the nature of host-microbe relationships. Over the last three decades, three-dimensional perspectives led by the development of electron tomography, and especially, confocal techniques continue to provide remarkable clarity and spatial detail of tissue and cellular phenomena. Confocal and electron microscopy provide novel revelations that are now commonplace in medium and large institutions. However, many other cutting-edge technologies and sample preparation workflows are relatively unexploited yet offer tremendous potential for unprecedented advancement in our understanding of the inner workings of pathogenic, beneficial, and symbiotic plant-microbe interactions. Here, we highlight key applications, benefits, and challenges of contemporary advanced imaging platforms for plant-microbe systems with special emphasis on several recently developed approaches, such as light-sheet, single molecule, super-resolution, and adaptive optics microscopy, as well as ambient and cryo-volume electron microscopy, X-ray microscopy, and cryo-electron tomography. Furthermore, the potential for complementary sample preparation methodologies, such as optical clearing, expansion microscopy, and multiplex imaging, will be reviewed. Our ultimate goal is to stimulate awareness of these powerful cutting-edge technologies and facilitate their appropriate application and adoption to solve important and unresolved biological questions in the field. [Formula: see text] Copyright © 2023 The Author(s). This is an open access article distributed under the CC BY 4.0 International license.

Simple and Effective Conformational Sampling Strategy for Intrinsically Disordered Proteins Using the UNRES Web Server

Intrinsically disordered proteins (IDPs) contain more charged amino acids than folded proteins, resulting in a lack of hydrophobic core(s) and a tendency to adopt rapidly interconverting structures rather than well-defined structures. The structural heterogeneity of IDPs, encoded by the amino acid sequence, is closely related to their unique roles in biological pathways, which require them to interact with different binding partners. Recently, Robustelli and co-workers have demonstrated that a balanced all-atom force field can be used to sample heterogeneous structures of disordered proteins ( Proc. Natl. Acad. Sci. U.S.A. 2018, 115, E4758-E4766). However, such a solution requires extensive computational resources, such as Anton supercomputers. Here, we propose a simple and effective solution to sample the conformational space of IDPs using a publicly available web server, namely, the UNited-RESidue (UNRES) web server. Our proposed solution requires no investment in computational resources and no prior knowledge of UNRES. UNRES Replica Exchange Molecular Dynamics (REMD) simulations were carried out on a set of eight disordered proteins at temperatures spanning from 270 to 430 K. Utilizing the latest UNRES force field designed for structured proteins, with proper selections of temperatures, we were able to produce comparable results to all-atom force fields as reported in work done by Robustelli and co-workers. In addition, NMR observables and the radius of gyration calculated from UNRES ensembles were directly compared with the experimental data to further evaluate the accuracy of the UNRES model at all temperatures. Our results suggest that carrying out the UNRES simulations at optimal temperatures using the UNRES web server can be a good alternative to sample heterogeneous structures of IDPs.

Caught in Action: Visualizing Dynamic Nanostructures Within Supramolecular Systems Chemistry

Supramolecular systems chemistry has been an area of active research to develop nanomaterials with life-like functions. Progress in systems chemistry relies on our ability to probe the nanostructure formation in solution. Often visualizing the dynamics of nanostructures which transform over time is a formidable challenge. This necessitates a paradigm shift from dry sample imaging towards solution-based techniques. We review the application of state-of-the-art techniques for real-time, in situ visualization of dynamic self-assembly processes. We present how solution-based techniques namely optical super-resolution microscopy, solution-state atomic force microscopy, liquid-phase transmission electron microscopy, molecular dynamics simulations and other emerging techniques are revolutionizing our understanding of active and adaptive nanomaterials with life-like functions. This Review provides the visualization toolbox and futuristic vision to tap the potential of dynamic nanomaterials.

Tautomerism unveils a self-inhibition mechanism of crystallization

Modifiers are commonly used in natural, biological, and synthetic crystallization to tailor the growth of diverse materials. Here, we identify tautomers as a new class of modifiers where the dynamic interconversion between solute and its corresponding tautomer(s) produces native crystal growth inhibitors. The macroscopic and microscopic effects imposed by inhibitor-crystal interactions reveal dual mechanisms of inhibition where tautomer occlusion within crystals that leads to natural bending, tunes elastic modulus, and selectively alters the rate of crystal dissolution. Our study focuses on ammonium urate crystallization and shows that the keto-enol form of urate, which exists as a minor tautomer, is a potent inhibitor that nearly suppresses crystal growth at select solution alkalinity and supersaturation. The generalizability of this phenomenon is demonstrated for two additional tautomers with relevance to biological systems and pharmaceuticals. These findings offer potential routes in crystal engineering to strategically control the mechanical or physicochemical properties of tautomeric materials.

Prion strains viewed through the lens of cryo-EM

Mammalian prions are lethal transmissible pathogens that cause fatal neurodegenerative diseases in humans and animals. They consist of fibrils of misfolded, host-encoded prion protein (PrP) which propagate through templated protein polymerisation. Prion strains produce distinct clinicopathological phenotypes in the same host and appear to be encoded by distinct misfolded PrP conformations and assembly states. Despite fundamental advances in our understanding of prion biology, key knowledge gaps remain. These include precise delineation of prion replication mechanisms, detailed explanation of the molecular basis of prion strains and inter-species transmission barriers, and the structural definition of neurotoxic PrP species. Central to addressing these questions is the determination of prion structure. While high-resolution definition of ex vivo prion fibrils once seemed unlikely, recent advances in cryo-electron microscopy (cryo-EM) and computational methods for 3D reconstruction of amyloids have now made this possible. Recently, near-atomic resolution structures of highly infectious, ex vivo prion fibrils from hamster 263K and mouse RML prion strains were reported. The fibrils have a comparable parallel in-register intermolecular β-sheet (PIRIBS) architecture that now provides a structural foundation for understanding prion strain diversity in mammals. Here, we review these new findings and discuss directions for future research.

Developing Graphene Grids for Cryoelectron Microscopy

Cryogenic electron microscopy (cryo-EM) single particle analysis has become one of the major techniques used to study high-resolution 3D structures of biological macromolecules. Specimens are generally prepared in a thin layer of vitrified ice using a holey carbon grid. However, the sample quality using this type of grid is not always ideal for high-resolution imaging even when the specimens in the test tube behave ideally. Various problems occur during a vitrification procedure, including poor/nonuniform distribution of particles, preferred orientation of particles, specimen denaturation/degradation, high background from thick ice, and beam-induced motion, which have become important bottlenecks in high-resolution structural studies using cryo-EM in many projects. In recent years, grids with support films made of graphene and its derivatives have been developed to efficiently solve these problems. Here, the various advantages of graphene grids over conventional holey carbon film grids, functionalization of graphene support films, production methods of graphene grids, and origins of pristine graphene contamination are reviewed and discussed.

Preyssler-type phosphotungstate is a new family of negative-staining reagents for the TEM observation of viruses

Transmission electron microscopy (TEM) is an essential method in virology because it allows for direct visualization of virus morphology at a nanometer scale. Negative staining to coat virions with heavy metal ions must be performed before TEM observations to achieve sufficient contrast. Herein, we report that potassium salts of Preyssler-type phosphotungstates (K(15-n)[P5W30O110Mn+], M = Na+, Ca2+, Ce3+, Eu3+, Bi3+, or Y3+) are high-performance negative staining reagents. Additionally, we compare the staining abilities of these salts to those of uranyl acetate and Keggin-type phosphotungstate. The potassium salt of Preyssler-type phosphotungstates has the advantage of not requiring prior neutralization because it is a neutral compound. Moreover, the potassium counter-cation can be protonated by a reaction with H+-resin, allowing easy exchange of protons with other cations by acid-base reaction. Therefore, the counter-cations can be changed. Encapsulated cations can also be exchanged, and clear TEM images were obtained using Preyssler-type compounds with different encapsulated cations. Preyssler-type phosphotungstates may be superior negative staining reagents for observing virus. Polyoxotungstates (tungsten-oxide molecules with diverse molecular structures and properties) are thus promising tools to develop negative staining reagents for TEM observations.

Atomic-Resolution Imaging of Small Organic Molecules on Graphene

Here, we demonstrate atomic-resolution scanning transmission electron microscopy (STEM) imaging of light elements in small organic molecules on graphene. We use low-dose, room-temperature, aberration-corrected STEM to image 2D monolayer and bilayer molecular crystals, followed by advanced image processing methods to create high-quality composite images from ∼10²-10⁴ individual molecules. In metalated porphyrin and phthalocyanine derivatives, these images contain an elementally sensitive contrast with up to 1.3 Å resolution─sufficient to distinguish individual carbon and nitrogen atoms. Importantly, our methods can be applied to molecules with low masses (∼0.6 kDa) and nanocrystalline domains containing just a few hundred molecules, making it possible to study systems for which large crystals cannot easily be grown. Our approach is enabled by low-background graphene substrates, which we show increase the molecules' critical dose by 2-7×. These results indicate a new route for low-dose, atomic-resolution electron microscopy imaging to solve the structures of small organic molecules.

High-Resolution Native Mass Spectrometry

Native mass spectrometry (MS) involves the analysis and characterization of macromolecules, predominantly intact proteins and protein complexes, whereby as much as possible the native structural features of the analytes are retained. As such, native MS enables the study of secondary, tertiary, and even quaternary structure of proteins and other biomolecules. Native MS represents a relatively recent addition to the analytical toolbox of mass spectrometry and has over the past decade experienced immense growth, especially in enhancing sensitivity and resolving power but also in ease of use. With the advent of dedicated mass analyzers, sample preparation and separation approaches, targeted fragmentation techniques, and software solutions, the number of practitioners and novel applications has risen in both academia and industry. This review focuses on recent developments, particularly in high-resolution native MS, describing applications in the structural analysis of protein assemblies, proteoform profiling of─among others─biopharmaceuticals and plasma proteins, and quantitative and qualitative analysis of protein-ligand interactions, with the latter covering lipid, drug, and carbohydrate molecules, to name a few.

Systematic Investigation of Lanthanoid Transition Heavy Metal Acetates as Electron Staining Reagents for Protein Molecules in Biological Transmission Electron Microscopy

Cryo-electron microscopy, widely used for high-resolution protein structure determination, does not require staining. Yet negative staining with heavy metal salts such as uranyl acetate has been in persistent demand since the 1950s due to its image contrasting capabilities at room temperature with a common electron microscope. However, uranium compounds are nuclear fuel materials and are tightly controlled worldwide. Acetates of each lanthanoid series elements except promethium are prepared at the same concentration (2%(w/v)) and used as a model on horse spleen ferritin for electron microscopic analysis to systematically evaluate their effectiveness as electron staining reagents for the protein. Analysis shows that the triacetates of samarium and europium, followed by gadolinium and erbium, and then lanthanum and neodymium could function as electron staining reagents. Thulium-triacetate precipitates thin plate-like crystals and may be used for selecting better imaging fields. Of the 14 lanthanoid-triacetates examined, about half are viable alternatives to uranyl acetate as an electron staining reagent for ferritin, and there appears an optimal range in ionic sizes for promising lanthanoids. This is the first systematic investigation of lanthanoid transition heavy metal triacetates from the viewpoint of lanthanoid contraction, using density distribution histograms of electron micrographs as an indicator for comparison with uranyl acetate.

Unraveling the Unconventional Order of a High-Mobility Indacenodithiophene-Benzothiadiazole Copolymer

A new class of donor-acceptor (D-A) copolymers found to produce high charge carrier mobilities competitive with amorphous silicon (>1 cm² V^-1 s^-1) exhibit the puzzling microstructure of substantial local order, however lacking long-range order and crystallinity previously deemed necessary for achieving high mobility. Here, we demonstrate the application of low-dose transmission electron microscopy to image and quantify the nanoscale and mesoscale organization of an archetypal D-A copolymer across areas comparable to electronic devices (≈9 μm²). The local structure is spatially resolved by mapping the backbone (001) spacing reflection, revealing nanocrystallites of aligned polymer chains throughout nearly the entire film. Analysis of the nanoscale structure of its ordered domains suggests significant short- and medium-range order and preferential grain boundary orientations. Moreover, we provide insights into the rich, interconnected mesoscale organization of this new family of D-A copolymers by analysis of the local orientational spatial autocorrelations.

Completeness and Consistency in Structural Domain Classifications

Domain classifications are a useful resource for computational analysis of the protein structure, but elements of their composition are often opaque to potential users. We perform a comparative analysis of our classification ECOD against the SCOPe, SCOP2, and CATH domain classifications with respect to their constituent domain boundaries and hierarchal organization. The coverage of these domain classifications with respect to ECOD and to the PDB was assessed by structure and by sequence. We also conducted domain pair analysis to determine broad differences in hierarchy between domains shared by ECOD and other classifications. Finally, we present domains from the major facilitator superfamily (MFS) of transporter proteins and provide evidence that supports their split into domains and for multiple conformations within these families. We find that the ECOD and CATH provide the most extensive structural coverage of the PDB. ECOD and SCOPe have the most consistent domain boundary conditions, whereas CATH and SCOP2 both differ significantly.

Structure memes: Intuitive visualization of sequence logo and subfamily logo information in a 3D protein-structural context

The number of available protein sequences covering virtually all known species is tremendous and ever growing due to the feasibility of the underlying nucleotide sequencing. The speed at which protein structures are being determined is increasing, and as a result of refined cryo-electron microscopy the proportion of solved membrane protein folds is expanding. Sequence data are used to illustrate evolution and to group proteins into families with various levels of subfamilies. Structure data of prototypical proteins provide insight into function brought about by an interplay of specific amino acid residues that are dispersed throughout the sequence. Visually combining rich sequence information with structure data in an intuitively comprehensible way would enhance the process of elucidating key protein aspects regarding evolution, sequence relations, and function. Here, a method is described that projects the information contained in sequence logos and subfamily logos onto protein structures. The amino acid composition at a site is encoded by a mix color in the red-yellow-blue space and the information content is presented by the radius of a sphere at the α-carbon position. The resulting display is termed "structure meme." The underlying sequence and atom coordinate data are retained in the file for simple retrieval on demand using a molecular structure visualization program. Structure memes are recognizable and convey extensive information in a human-discernable way that requires little training.

Two Decades of Evolution of Our Understanding of the Transient Receptor Potential Melastatin 2 (TRPM2) Cation Channel

The transient receptor potential melastatin (TRPM) family belongs to the superfamily of TRP ion channels. It consists of eight family members that are involved in a plethora of cellular functions. TRPM2 is a homotetrameric Ca²⁺-permeable cation channel activated upon oxidative stress and is important, among others, for body heat control, immune cell activation and insulin secretion. Invertebrate TRPM2 proteins are channel enzymes; they hydrolyze the activating ligand, ADP-ribose, which is likely important for functional regulation. Since its cloning in 1998, the understanding of the biophysical properties of the channel has greatly advanced due to a vast number of structure–function studies. The physiological regulators of the channel have been identified and characterized in cell-free systems. In the wake of the recent structural biochemistry revolution, several TRPM2 cryo-EM structures have been published. These structures have helped to understand the general features of the channel, but at the same time have revealed unexplained mechanistic differences among channel orthologues. The present review aims at depicting the major research lines in TRPM2 structure-function. It discusses biophysical properties of the pore and the mode of action of direct channel effectors, and interprets these functional properties on the basis of recent three-dimensional structural models.

Expression and purification of the cardiac sodium channel NaV1.5 for cryo-EM structure determination

Voltage-gated sodium channel Na_V1.5 is responsible for initiating and propagating cardiac action potentials by selectively conducting Na⁺ into cardiomyocytes. Class-I antiarrhythmic drugs target Na_V1.5 for treatment of arrhythmias. During the last few years, cryogenic electron microscopy (cryo-EM) has become a powerful technique to determine the structures of ion channels at atomic level. In order to reveal the structural features of Na_V1.5 and the structural basis for its interaction with antiarrhythmic drugs by cryo-EM, Na_V1.5 protein must be expressed at high levels and purified to homogeneity. In this chapter, we discuss the expression and purification of Na_V1.5 in a mammalian expression system. We optimized the construct by deleting unstructured intracellular loops of rat Na_V1.5 while retaining core functional regions. The resulting rNa_V1.5_C is fully functional and is blocked by Class-I antiarrhythmic drugs in a state-dependent manner. Protocols are presented for expressing and purifying sufficient sample of Na_V1.5 for preparing cryo-EM grids. The resulting cryo-EM structure is briefly described.

MicroED in natural product and small molecule research

Covering: 2013 to 2020The electron cryo-microscopy (cryo-EM) method Microcrystal Electron Diffraction (MicroED) allows the collection of high-resolution structural data from vanishingly small crystals that appear like amorphous powders or very fine needles. Since its debut in 2013, data collection and analysis schemes have been fine-tuned, and there are currently close to 100 structures determined by MicroED. Although originally developed to study proteins, MicroED is also very powerful for smaller systems, with some recent and very promising examples from the field of natural products. Herein, we review what has been achieved so far and provide examples of natural product structures, as well as demonstrate the expected future impact of MicroED to the field of natural product and small molecule research.

Class III phosphatidylinositol 3-kinase complex I subunit NRBF2/Atg38 - from cell and structural biology to health and disease

Macroautophagy/autophagy is triggered by various starvation and stress conditions. The phospholipid phosphatidylinositol-3-phosphate (PtdIns3P) is essential for the formation of the autophagosome both in yeast and mammals. The class III phosphatidylinositol 3-kinase, PIK3C3C in humans or Vps34 in yeast, produces PtdIns3P by phosphorylating the 3'-OH position of phosphatidylinositol (PtdIns). In order to synthesize PtdIns3P for the initiation of autophagy, PIK3C3/Vps34 has a heterotetrameric core, the PIK3C3 complex I (hereafter complex I) composed of PIK3C3/Vps34, PIK3R4/Vps15, BECN1/Vps30, and ATG14/Atg14. A fifth component of complex I, NRBF2 in mammals and Atg38 in yeast, was found and has been characterized in the past decade. The field has been expanding from cell and structural biology to mouse model and cohort studies. Here I will summarize the structures and models of complex I binding NRBF2/Atg38, its intracellular roles, and its involvement in health and disease. Along with this expansion of the field, different conclusions have been drawn in several topics. I will clarify what has and has not been agreed, and what is to be clarified in the future.

Current capsid assembly models of icosahedral nucleocytoviricota viruses

Nucleocytoviricota viruses (NCVs) belong to a newly established phylum originally grouped as Nucleocytoplasmic large DNA viruses. NCVs are unique because of their large and complicated genomes that contain cellular genes with homologs from all kingdoms of life, raising intensive debates on their evolutional origins. Many NCVs pack their genomes inside massive icosahedral capsids assembled from thousands of proteins. Studying the assembly mechanism of such capsids has been challenging until breakthroughs from structural studies. Subsequently, several models of the capsid assembly were proposed, which provided some interesting insights on this elaborate process. In this review, we discuss three of the most recent assembly models as well as supporting experimental observations. Furthermore, we propose a new model that combines research developments from multiple sources. Investigation of the assembly process of these vast NCV capsids will facilitate future deciphering of the molecular mechanisms driving the formation of similar supramolecular complexes.

Electron-event representation data enable efficient cryoEM file storage with full preservation of spatial and temporal resolution

Direct detector device (DDD) cameras have revolutionized electron cryomicroscopy (cryoEM) with their high detective quantum efficiency (DQE) and output of movie data. A high ratio of camera frame rate (frames per second) to camera exposure rate (electrons per pixel per second) allows electron counting, which further improves the DQE and enables the recording of super-resolution information. Movie output also allows the correction of specimen movement and compensation for radiation damage. However, these movies come at the cost of producing large volumes of data. It is common practice to sum groups of successive camera frames to reduce the final frame rate, and therefore the file size, to one suitable for storage and image processing. This reduction in the temporal resolution of the camera requires decisions to be made during data acquisition that may result in the loss of information that could have been advantageous during image analysis. Here, experimental analysis of a new electron-event representation (EER) data format for electron-counting DDD movies is presented, which is enabled by new hardware developed by Thermo Fisher Scientific for their Falcon DDD cameras. This format enables the recording of DDD movies at the raw camera frame rate without sacrificing either spatial or temporal resolution. Experimental data demonstrate that the method retains super-resolution information and allows the correction of specimen movement at the physical frame rate of the camera while maintaining manageable file sizes. The EER format will enable the development of new methods that can utilize the full spatial and temporal resolution of DDD cameras.

Interactions between the Intrinsically Disordered Regions of hnRNP-A2 and TDP-43 Accelerate TDP-43's Conformational Transition

Most biological functions involve protein-protein interactions. Our understanding of these interactions is based mainly on those of structured proteins, because encounters between intrinsically disordered proteins (IDPs) or proteins with intrinsically disordered regions (IDRs) are much less studied, regardless of the fact that more than half eukaryotic proteins contain IDRs. RNA-binding proteins (RBPs) are a large family whose members almost all have IDRs in addition to RNA binding domains. These IDRs, having low sequence similarity, interact, but structural details on these interactions are still lacking. Here, using the IDRs of two RBPs (hnRNA-A2 and TDP-43) as a model, we demonstrate that the rate at which TDP-43's IDR undergoes the neurodegenerative disease related α-helix-to-β-sheet transition increases in relation to the amount of hnRNP-A2's IDR that is present. There are more than 1500 RBPs in human cells and most of them have IDRs. RBPs often join the same complexes to regulate genes. In addition to the structured RNA-recognition motifs, our study demonstrates a general mechanism through which RBPs may regulate each other's functions through their IDRs.

Hypothesis for a mechanism of beam-induced motion in cryo-electron microscopy

Estimates of heat-transfer rates during plunge-cooling and the patterns of ice observed in cryo-EM samples indicate that the grid bars cool much more slowly than do the support foil and sample near the middle of the grid openings. The resulting transient temperature differences generate transient tensile stresses in the support foil. Most of this foil stress develops while the sample is liquid and cooling toward its glass transition T g, and so does not generate tensile sample stress. As the grid bars continue cooling towards the cryogen temperature and contracting, the tensile stress in the foil is released, placing the sample in compressive stress. Radiation-induced creep in the presence of this compressive stress should generate a doming of the sample in the foil openings, as is observed experimentally. Crude estimates of the magnitude of the doming that may be generated by this mechanism are consistent with observation. Several approaches to reducing beam-induced motion are discussed.

Classical pathways of gene regulation by retinoids

Retinoic acid receptors were discovered during early studies of the actions and mechanisms of essential vitamins. Vitamin A is metabolized in the body to retinoic acid (RA) which is a key compound in the control of many developmental processes in chordates. These functions are mediated by a subfamily of nuclear receptors, divided into two classes, the retinoic acid receptors (RAR) and the retinoid X receptors (RXR). Each class is encoded by three closely related genes that are located on different chromosomes. The three proteins in each class are designated α, β and γ, respectively. A wealth of structural studies have shown that they all share the same architecture including a DNA-binding domain connected by a flexible linker to the ligand and co-activator binding domain. Retinoic acid incorporation into the ligand-binding domain leads to a conformational change enabling the formation of RAR homodimers or RAR/RXR heterodimers that in turn bind specifically to target DNA sequences. The consensus sequences located on the promotors of regulated genes are known as retinoic acid response elements (RARE). The activated RAR/RXR homodimers recruit co-activators with histone acetylase activity leading to an opening of the chromatin structure and enabling downstream transcription of regulated genes. These canonical pathways describe the control mechanism for the majority of developmental processes mediated by retinoic acid and its derivatives.

Musashi-1: An Example of How Polyalanine Tracts Contribute to Self-Association in the Intrinsically Disordered Regions of RNA-Binding Proteins

RNA-binding proteins (RBPs) have intrinsically disordered regions (IDRs) whose biophysical properties have yet to be explored to the same extent as those of the folded RNA interacting domains. These IDRs are essential to the formation of biomolecular condensates, such as stress and RNA granules, but dysregulated assembly can be pathological. Because of their structural heterogeneity, IDRs are best studied by NMR spectroscopy. In this study, we used NMR spectroscopy to investigate the structural propensity and self-association of the IDR of the RBP Musashi-1. We identified two transient α-helical regions (residues ~208–218 and ~270–284 in the IDR, the latter with a polyalanine tract). Strong NMR line broadening in these regions and circular dichroism and micrography data suggest that the two α-helical elements and the hydrophobic residues in between may contribute to the formation of oligomers found in stress granules and implicated in Alzheimer’s disease. Bioinformatics analysis suggests that polyalanine stretches in the IDRs of RBPs may have evolved to promote RBP assembly.

Special Issue: The Actin-Myosin Interaction in Muscle: Background and Overview

Muscular contraction is a fundamental phenomenon in all animals; without it life as we know it would be impossible. The basic mechanism in muscle, including heart muscle, involves the interaction of the protein filaments myosin and actin. Motility in all cells is also partly based on similar interactions of actin filaments with non-muscle myosins. Early studies of muscle contraction have informed later studies of these cellular actin-myosin systems. In muscles, projections on the myosin filaments, the so-called myosin heads or cross-bridges, interact with the nearby actin filaments and, in a mechanism powered by ATP-hydrolysis, they move the actin filaments past them in a kind of cyclic rowing action to produce the macroscopic muscular movements of which we are all aware. In this special issue the papers and reviews address different aspects of the actin-myosin interaction in muscle as studied by a plethora of complementary techniques. The present overview provides a brief and elementary introduction to muscle structure and function and the techniques used to study it. It goes on to give more detailed descriptions of what is known about muscle components and the cross-bridge cycle using structural biology techniques, particularly protein crystallography, electron microscopy and X-ray diffraction. It then has a quick look at muscle mechanics and it summarises what can be learnt about how muscle works based on the other studies covered in the different papers in the special issue. A picture emerges of the main molecular steps involved in the force-producing process; steps that are also likely to be seen in non-muscle myosin interactions with cellular actin filaments. Finally, the remarkable advances made in studying the effects of mutations in the contractile assembly in causing specific muscle diseases, particularly those in heart muscle, are outlined and discussed.

Advances in cryo-electron tomography and subtomogram averaging and classification

Cryo-electron tomography (cryoET) can provide 3D reconstructions, or tomograms, of pleomorphic objects such as organelles or cells in their close-to-native states. Subtomograms that contain repetitive structures can be further extracted and subjected to averaging and classification to improve resolution, and this process has become an emerging structural biology method referred to as cryoET subtomogram averaging and classification (cryoSTAC). Recent technical advances in cryoSTAC have had a profound impact on many fields in biology. Here, I review recent exciting work on several macromolecular assemblies demonstrating the power of cryoSTAC for in situ structure analysis and discuss challenges and future directions.

Reducing Radiation Damage in Soft Matter with Femtosecond-Timed Single-Electron Packets

Despite the development of a myriad of mitigation methods, radiation damage continues to be a major limiting factor in transmission electron microscopy. Intriguing results have been reported using pulsed-laser driven and chopped electron beams for modulated dose delivery, but the underlying relationships and effects remain unclear. Indeed, delivering precisely timed single-electron packets to the specimen has yet to be systematically explored, and no direct comparisons to conventional methods within a common parameter space have been made. Here, using a model linear saturated hydrocarbon (n-hexatriacontane, C₃₆H₇₄), we show that precisely timed delivery of each electron to the specimen, with a well-defined and uniform time between arrival, leads to a repeatable reduction in damage compared to conventional ultralow-dose methods for the same dose rate and the same accumulated dose. Using a femtosecond pulsed laser to confine the probability of electron emission to a 300 fs temporal window, we find damage to be sensitively dependent on the time between electron arrival (controlled with the laser repetition rate) and on the number of electrons per packet (controlled with the laser-pulse energy). Relative arrival times of 5, 20, and 100 μs were tested for electron packets comprised of, on average, 1, 5, and 20 electrons. In general, damage increased with decreasing time between electrons and, more substantially, with increasing electron number. Further, we find that improvements relative to conventional methods vanish once a threshold number of electrons per packet is reached. The results indicate that precise electron-by-electron dose delivery leads to a repeatable reduction in irreversible structural damage, and the systematic studies indicate this arises from control of the time between sequential electrons arriving within the same damage radius, all else being equal.

Challenges and opportunities in cryo-EM single-particle analysis

Cryogenic electron microscopy (cryo-EM) enables structure determination of macromolecular objects and their assemblies. Although the techniques have been developing for nearly four decades, they have gained widespread attention in recent years due to technical advances on numerous fronts, enabling traditional microscopists to break into the world of molecular structural biology. Many samples can now be routinely analyzed at near-atomic resolution using standard imaging and image analysis techniques. However, numerous challenges to conventional workflows remain, and continued technical advances open entirely novel opportunities for discovery and exploration. Here, I will review some of the main methods surrounding cryo-EM with an emphasis specifically on single-particle analysis, and I will highlight challenges, open questions, and opportunities for methodology development.

Dissecting diverse functions of NMDA receptors by structural biology

N-Methyl-d-aspartate receptors (NMDARs) are glutamate-gated ion channels, which are critically involved in brain development, learning and memory, cognition, as well as a number of neurological diseases and disorders. Structural biology of NMDARs has been challenging due to technical difficulties associated with assembling a number of different membrane protein subunits. Here, we review historical X-ray crystallographic studies on isolated extracellular domains, which are still the most effective mean to delineate compound binding modes, as well as the most recent studies using electron cryo-microscopy (cryo-EM). A number of NMDAR structures accumulated over the past 15 years provide insights into the hetero-tetrameric assembly pattern, pharmacological specificities elicited by subtypes and alternative splicing, and potential patterns of conformational dynamics; however, many more important unanswered questions remain.

Outlier analyses of the Protein Data Bank archive using a probability-density-ranking approach

Outlier analyses are central to scientific data assessments. Conventional outlier identification methods do not work effectively for Protein Data Bank (PDB) data, which are characterized by heavy skewness and the presence of bounds and/or long tails. We have developed a data-driven nonparametric method to identify outliers in PDB data based on kernel probability density estimation. Unlike conventional outlier analyses based on location and scale, Probability Density Ranking can be used for robust assessments of distance from other observations. Analyzing PDB data from the vantage points of probability and frequency enables proper outlier identification, which is important for quality control during deposition-validation-biocuration of new three-dimensional structure data. Ranking of Probability Density also permits use of Most Probable Range as a robust measure of data dispersion that is more compact than Interquartile Range. The Probability-Density-Ranking approach can be employed to analyze outliers and data-spread on any large data set with continuous distribution.

Towards an Understanding of Synapse Formation

Synapses are intercellular junctions specialized for fast, point-to-point information transfer from a presynaptic neuron to a postsynaptic cell. At a synapse, a presynaptic terminal secretes neurotransmitters via a canonical release machinery, while a postsynaptic specialization senses neurotransmitters via diverse receptors. Synaptic junctions are likely organized by trans-synaptic cell-adhesion molecules (CAMs) that bidirectionally orchestrate synapse formation, restructuring, and elimination. Many candidate synaptic CAMs were described, but which CAMs are central actors and which are bystanders remains unclear. Moreover, multiple genes encoding synaptic CAMs were linked to neuropsychiatric disorders, but the mechanisms involved are unresolved. Here, I propose that engagement of multifarious synaptic CAMs produces parallel trans-synaptic signals that mediate the establishment, organization, and plasticity of synapses, thereby controlling information processing by neural circuits. Among others, this hypothesis implies that synapse formation can be understood in terms of inter- and intracellular signaling, and that neuropsychiatric disorders involve an impairment in such signaling.