Dramatic Enhancement of Binding Affinities Between Foldamer-Based Receptors and Anions by Intra-Receptor π-Stacking

Complexation-driven assembly of imine-linked helical receptors showing adaptive folding and temperature-dependent guest selection

The development of synthetic receptors capable of selectively binding guests with diverse structures and multiple functional groups poses a significant challenge. Here, we present the efficient assembly of foldamer-based receptors for monosaccharides, utilising the principles of complexation-induced equilibrium shifting and adaptive folding. Diimine 4 can be quantitatively assembled from smaller components when D-galactose is added as a guest among monosaccharides we examined. During this assembly, dual complexation-induced equilibrium shifts toward both the formation of diimine 4 and the conversion of D-galactose into α-D-galactofuranose are observed. Diimine 6 is quantitatively assembled in the presence of two different guests, methyl β-D-glucopyranoside and methyl β-D-galactopyranoside, resulting in the formation of two dimeric complexes: (6-MP)2⊃(methyl β-D-glucopyranoside)2 and (6-MM)2⊃(methyl β-D-galactopyranoside∙2H2O)2, respectively. These two complexes exhibit distinct folding structures with domain-swapping cavities depending on the bound guest and temperature. Interestingly, (6-MM)2⊃(methyl β-D-galactopyranoside∙2H2O)2 is exclusively formed at lower temperatures, while (6-MP)2⊃(methyl β-D-glucopyranoside)2 is only formed at higher temperatures.

Hydrogen Bonded Foldamers with Axial Chirality: Chiroptical Properties and Applications

Folding phenomenon refers to the formation of a specific conformation widely featured by the intramolecular interactions, which broadly exist in biomacromolecules, and are closely related to their structures and functions. A variety of oligomeric folded molecules have been designed and synthesized, namely "foldamer", exhibiting potentials in pharmaceutical and catalysis. Molecular folding is a promising strategy to transfer chirality from substituents to the whole skeleton, when chirality transfer, amplification, evolution, and other behaviors could be achieved. Investigating chirality using foldamer model deepens the understanding of the structure-function correlation in biomacromolecules and expands the molecular toolbox towards chiroptical and asymmetrical chemistry. Substitutes with abundant hydrogen bonding sites conjugated to a rotatable aryl group afford a parallel β-sheet-like conformation, which enables the emergence and manipulation of axial chirality. This concept aims to give a brief introduction and summary of the hydrogen bonded foldamers with anchored axial chirality, by taking some recent cases as examples. Design principles, control over axial chirality and applications are also reviewed.

Formation of supramolecular channels by reversible unwinding-rewinding of bis(indole) double helix via ion coordination

Stimulus-responsive reversible transformation between two structural conformers is an essential process in many biological systems. An example of such a process is the conversion of amyloid-β peptide into β-sheet-rich oligomers, which leads to the accumulation of insoluble amyloid in the brain, in Alzheimer's disease. To reverse this unique structural shift and prevent amyloid accumulation, β-sheet breakers are used. Herein, we report a series of bis(indole)-based biofunctional molecules, which form a stable double helix structure in the solid and solution state. In presence of chloride anion, the double helical structure unwinds to form an anion-coordinated supramolecular polymeric channel, which in turn rewinds upon the addition of Ag⁺ salts. Moreover, the formation of the anion-induced supramolecular ion channel results in efficient ion transport across lipid bilayer membranes with excellent chloride selectivity. This work demonstrates anion-cation-assisted stimulus-responsive unwinding and rewinding of artificial double-helix systems, paving way for smart materials with better biomedical applications.

Adaptive Binding of Alkyl Glycosides by Nonpeptidic Helix Bundles in Water: Toward Artificial Glycolipid Binding Proteins

Amphipathic water-soluble helices formed from synthetic peptides or foldamers are promising building blocks for the creation of self-assembled architectures with non-natural shapes and functions. While rationally designed artificial quaternary structures such as helix bundles have been shown to contain preformed cavities suitable for guest binding, there are no examples of adaptive binding of guest molecules by such assemblies in aqueous conditions. We have previously reported a foldamer 6-helix bundle that contains an internal nonpolar cavity able to bind primary alcohols as guest molecules. Here, we show that this 6-helix bundle can also interact with larger, more complex guests such as n-alkyl glycosides. X-ray diffraction analysis of co-crystals using a diverse set of guests together with solution and gas-phase studies reveals an adaptive binding mode whereby the apo form of the 6-helix bundle undergoes substantial conformational change to accommodate the hydrocarbon chain in a manner reminiscent of glycolipid transfer proteins in which the cavity forms upon lipid uptake. The dynamic nature of the self-assembling and molecular recognition processes reported here marks a step forward in the design of functional proteomimetic molecular assemblies.

Structural adaptations of electrosprayed aromatic oligoamide foldamers on Ag(111)

Aromatic foldamers are promising for applications such as molecular recognition and molecular machinery. For many of these, defect free, 2D-crystaline monolayers are needed. To this end, submonolayers were prepared in ultra-high vacuum (UHV) on Ag(111) via electrospray controlled ion beam deposition (ES-CIBD). On the surface, the unfolded state is unambiguously identified by real-space single-molecule imaging using scanning tunnelling microscopy (STM) and it is found to assemble in regular structures.

Tweezer-type binding cavity formed by the helical folding of a carbazole-pyridine oligomer

We have synthesised a new aromatic foldamer based on the carbazole-pyridine oligomers that adopt helical conformations via dipole-dipole interactions and π-stacking between two ethynyl bond-linked monomers. This foldamer scaffold has been further modified into a synthetic receptor with a tweezer-type binding cavity outside the helical backbone upon folding, in contrast to most aromatic foldamers with internal binding cavities. The tweezer-type cavity is composed of two parallel pyrenyl planes, allowing for the intercalation of a naphthalenediimide guest via π-stacking and CH⋯O interactions, as demonstrated using its ¹H NMR spectra and X-ray crystal structure.

Revealing the Hidden Costs of Organization in Host-Guest Chemistry Using Chloride-Binding Foldamers and Their Solvent Dependence

Preorganization is a key concept in supramolecular chemistry. Preorganized receptors enhance binding by minimizing the organization costs associated with adopting the conformation needed to orient the binding sites toward the guest. Conversely, poorly organized receptors show affinities below what is possible based on the potential of their specific binding interactions. Despite the fact that the organization energy is paid each time like a tax, its value has never been measured directly, though many compounds have been developed to measure its effects. We present a method to quantify the hidden costs of receptor organization by independently measuring the contribution it makes to chloride complexation by a flexible foldameric receptor. This method uses folding energy to approximate organization energy and relies on measurement of the coil-helix equilibrium as a function of solvent. We also rely on the finding, established with rigid receptors, that affinity is inversely related to the solvent dielectric and expect the same for the foldamer's helically organized state. Increasing solvent polarity across nine dichloromethane-acetonitrile mixtures we see an unusual V-shape in affinity (decrease then increase). Quantitatively, this shape arises from weakened hydrogen-bonding interactions with solvent polarity followed by solvent-driven folding into an organized helix. We confirm that dielectric screening impacts the stability of host-guest complexes of flexible foldamers just like rigid receptors. These results experimentally verify the canonical model of binding (affinity depends on the sum of organization and noncovalent interactions). The picture of how solvent impacts complex stability and conformational organization thereby helps lay the groundwork for de novo receptor design.

Guest-Driven Control of Folding in a Crown-Ether-Functionalized ortho-Phenylene

A crown-ether-functionalized o-phenylene tetramer has been synthesized and coassembled with monotopic and ditopic, achiral and chiral secondary ammonium ion guests. NMR spectroscopy shows that the o-phenylene forms both 1:1 and 1:2 complexes with monotopic guests while remaining well-folded. Binding of an elongated ditopic guest, however, forces the o-phenylene to misfold by pulling the terminal rings apart. A chiral ditopic guest biases the o-phenylene twist sense.

Subtle Modification of Imine-linked Helical Receptors to Significantly Alter their Binding Affinities and Selectivities for Chiral Guests

Aromatic helical receptors P-1 and P-2 were slightly modified by aerobic oxidation to afford new receptors P-7 and P-8 with right-handed helical cavities. This subtle modification induced significant changes in the binding properties for chiral guests. Specifically, P-1 was reported to bind d-tartaric acid (K_a =35500 M^-1 ), used as a template, much strongly than l-tartaric acid (326 M^-1 ). In contrast, its modified receptor P-7 exhibited significantly reduced affinities for d-tartaric acid (3600 M^-1 ) and l-tartaric acid (125 M^-1 ). More dramatic changes in the affinities and selectivities were observed for P-2 and P-8 upon binding of polyol guests. P-2 was determined to selectively bind d-sorbitol (52000 M^-1 ) over analogous guests, but P-8 showed no binding selectivity: d-sorbitol (1890 M^-1 ), l-sorbitol (3330 M^-1 ), d-arabitol (959 M^-1 ), l-arabitol (4970 M^-1 ) and xylitol (4960 M^-1 ) in 5% (v/v) DMSO/CH₂ Cl₂ at 25±1 °C. These results clearly demonstrate that even subtle post-modifications of synthetic receptors may significantly alter their binding affinities and selectivities, in particular for guests of long and flexible chains.

Synthesis of pyrrolyl-BODIPY dyes through regioselective SN Ar reactions and application as a fluorescent sensor for fluoride anion

Two pyrrolyl-BODIPY dyes with 3,5-di-[Formula: see text]-butyl-4-hydroxyphenyl group were synthesized through stepwise S[Formula: see text]Ar reactions of 3,5-dibromoBODIPYs, which were used as a fluorescent sensor for basic anions. The intermediate pyrrolyl-BODIPYs 2a–2b were regioselectively synthesized through an efficient S[Formula: see text]Ar reaction between 3,5-dibromoBODIPY 1a and pyrroles. The target pyrrolyl-BODIPYs 3a–3b with a 3,5-di-[Formula: see text]-butyl-4-hydroxyphenyl group at 3-position and a pyrrole substituent at 5-position were obtained through a second S[Formula: see text]Ar reaction between pyrrolyl-BODIPYs 2a–2b and high steric hindrance 2,6-dibutylphenol in 90% and 88% yields, respectively. In contrast, the reaction between pyrrolyl-BODIPYs 2a–2b and phenol gave pyrrolyl-BODIPYs 3c–3d with phenoxy substituent at 3-position. These pyrrolyl-BODIPYs 3a–2d show strong, sharp absorptions (551–604 nm) and emissions (564–634 nm) with high fluorescence quantum yields up to 0.86 in dichloromethane. Importantly, the 3,5-di-[Formula: see text]-butyl-4-hydroxyphenyl group of pyrrolyl-BODIPY 3a showed a turn-off fluorescent response toward fluoride anion.

Folding-controlled assembly of ortho-phenylene-based macrocycles

The self-assembly of foldamers into macrocycles is a simple approach to non-biological higher-order structure. Previous work on the co-assembly of ortho-phenylene foldamers with rod-shaped linkers has shown that folding and self-assembly affect each other; that is, the combination leads to new emergent behavior, such as access to otherwise unfavorable folding states. To this point this relationship has been passive. Here, we demonstrate control of self-assembly by manipulating the foldamers' conformational energy surfaces. A series of o-phenylene decamers and octamers have been assembled into macrocycles using imine condensation. Product distributions were analyzed by gel-permeation chromatography and molecular geometries extracted from a combination of NMR spectroscopy and computational chemistry. The assembly of o-phenylene decamers functionalized with alkoxy groups or hydrogens gives both [2 + 2] and [3 + 3] macrocycles. The mixture results from a subtle balance of entropic and enthalpic effects in these systems: the smaller [2 + 2] macrocycles are entropically favored but require the oligomer to misfold, whereas a perfectly folded decamer fits well within the larger [3 + 3] macrocycle that is entropically disfavored. Changing the substituents to fluoro groups, however, shifts assembly quantitatively to the [3 + 3] macrocycle products, even though the structural changes are well-removed from the functional groups directly participating in bond formation. The electron-withdrawing groups favor folding in these systems by strengthening arene–arene stacking interactions, increasing the enthalpic penalty to misfolding. The architectural changes are substantial even though the chemical perturbation is small: analogous o-phenylene octamers do not fit within macrocycles when perfectly folded, and quantitatively misfold to give small macrocycles regardless of substitution. Taken together, these results represent both a high level of structural control in structurally complex foldamer systems and the demonstration of large-amplitude structural changes as a consequence of a small structural effects.

The folding propensity of ortho-phenylene foldamers dictates the outcome of their self-assembly into macrocycles.

Sharp Turns and Fluorescent Repeats: Modular Construction and Shape-Dependent Electronic Properties of π-Conjugated Chain Molecules

In search of the design rules for structural ordering of open-chain molecules, we have built a series of zig-zag shaped π-conjugated structures with ring-fused heteroaromatics as sharp turns and tolane-based linear fragments as light-emitting units. Using only a finite number of common building blocks, an efficient "double-elongation" strategy was implemented to construct a series of π-conjugated oligomers with precise length control (55-89 % yields). Our approach takes advantage of the modular nature of the bis(triazolo)benzene synthesis and the masked reactivity of the nitro group. A combination of photophysical and DFT computational studies revealed that the bis(triazolo)benzene-tolane repeat units behave as electronically decoupled light-absorbing/emitting units (λ_max,em = 408-422 nm; Φ_F = 20-25 % in THF). Such context-independent photophysical properties promise their potential applications in chemical sensing and switching.

Extended enantiopure ortho-phenylene ethylene (o-OPE)-based helical systems as scaffolds for supramolecular architectures: a study of chiroptical response and its connection to the CISS effect

Versatile enantiopure helical systems are described and are of interest owing to their intense chiroptical responses, their attractive architecture for metallosupramolecular chemistry and CISS effect.

Aromatic Helical Foldamers as Nucleophilic Catalysts for the Regioselective Acetylation of Octyl β-d-Glucopyranoside

Two indolocarbazole-naphthyridine foldamers 2 and 3 that fold into helical conformations were prepared. The 4-(N,N-dimethylamino)pyridine (DMAP) moiety was introduced at one end of the foldamer strands to develop foldamer-based catalysts for the site-selective acylation of polyols. These foldamers adopt helical conformations containing internal cavities capable of binding octyl β-d-glucopyranoside. The association constants were determined to be 1.9 (±0.1)×10⁵  M^-1 for 2 and 2.1 (±0.1)×10⁵  M^-1 for 3 in CH₂ Cl₂ at 25 °C. In the presence of DMAP, 2 or 3 as the catalysts, octyl β-d-glucopyranoside was subjected to acetylation under identical reaction conditions. The DMAP-catalysed reaction afforded the random distribution of the monoacetylates (6-OAc : 4-OAc : 3-OAc : 2-OAc=33 : 24 : 41 : 2). In contrast, foldamers 2 and 3 led to the predominant formation of 6-OAc. The relative distributions were estimated to be 6-OAc : 4-OAc : 3-OAc=88 : 4 : 6 : ∼0 with 2 and 6-OAc : 4-OAc : 3-OAc : 2-OAc=90 : 3 : 6 : 1 with 3.