How Big is the Pinacol Boronic Ester as a Substituent?

Stereodivergency in Copper-Catalyzed Borylative Difunctionalizations: The Impact of Boron Coordination

A reagent-controlled diastereodivergent copper-catalyzed borylative difunctionalization is reported. The formation of Lewis adducts that guide selectivity is commonly invoked in organic reaction mechanisms. Using density functional theory calculations, we identified BpinBdan as a sterically similar and less Lewis acidic alternative to B2pin2. Using a newly developed borylative aldol domino reaction as the proof-of-concept, we demonstrate a change in stereochemical outcome by a simple change of borylating reagent-B2pin2 affords the diastereomer associated with coordination control while BpinBdan overturns this mode of binding. We show that this strategy can be generalized to other scaffolds and, more importantly, that BpinBdan does not alter the diastereomeric outcome of the reaction when coordination is not involved. BpinBdan can be viewed as a mechanistic probe for coordination in future copper-catalyzed borylation reactions.

Reactivity and Steric Parameters from 2D to 3D Bulky Pyridines: Increasing Steric Demand at Nitrogen with Chiral Azatriptycenes

Sterically hindered pyridines embedded in a three-dimensional triptycene framework have been synthesized, and their resolution by chiral HPLC enabled access to unprecedented enantiopure pyridines exceeding the known steric limits. The design principles for new axially chiral pyridine derivatives are then described. To rationalize their associations with Lewis acids and transition metals, a comprehensive determination of the steric and electronic parameters for this new class of pyridines was performed. This led to the general parameterization of the steric parameters (percent buried volume %VBur, Tolman cone angle θ, and He8_steric descriptor) for a large set of two- and three-dimensional pyridine derivatives. These parameters are shown to describe quantitatively their interactions with carbon- and boron-centered Lewis acids and were used to predict the ΔG° of association with the prototypical B(C6F5)3 Lewis acid widely used in frustrated Lewis pair catalysis. This first parameterization of pyridine sterics is a fundamental basis for the future development of predictive reactivity models and for guiding new applications of bulky and chiral pyridines in organocatalysis, frustrated Lewis pairs, and transition-metal catalysis.

Access to C(sp3) borylated and silylated cyclic molecules: hydrogenation of corresponding arenes and heteroarenes

This paper presents a simple and cost-effective hydrogenation method for synthesizing a myriad of cycloalkanes and saturated heterocycles bearing boryl or silyl substituents. The catalyst used are heterogeneous, readily available, bench stable, and recyclable. Also demonstrated is the application of the method to compounds that possess both boryl and silyl groups. When combined with Ir-catalyzed sp2 C-H borylation, such hydrogenations offer a two-step complementary alternative to direct sp3 C-H borylations that can suffer selectivity and reactivity issues. Of practical value to the community, complete stereochemical analyses of reported borylated compounds that were never fully characterized are reported herein.

Advances and Prospects in Understanding London Dispersion Interactions in Molecular Chemistry

London dispersion (LD) interactions are the main contribution of the attractive part of the van der Waals potential. Even though LD effects are the driving force for molecular aggregation and recognition, the role of these omnipresent interactions in structure and reactivity had been largely underappreciated over decades. However, in the recent years considerable efforts have been made to thoroughly study LD interactions and their potential as a chemical design element for structures and catalysis. This was made possible through a fruitful interplay of theory and experiment. This review highlights recent results and advances in utilizing LD interactions as a structural motif to understand and utilize intra- and intermolecularly LD-stabilized systems. Additionally, we focus on the quantification of LD interactions and their fundamental role in chemical reactions.

%VBur index and steric maps: from predictive catalysis to machine learning

Steric indices are parameters used in chemistry to describe the spatial arrangement of atoms or groups of atoms in molecules. They are important in determining the reactivity, stability, and physical properties of chemical compounds. One commonly used steric index is the steric hindrance, which refers to the obstruction or hindrance of movement in a molecule caused by bulky substituents or functional groups. Steric hindrance can affect the reactivity of a molecule by altering the accessibility of its reactive sites and influencing the geometry of its transition states. Notably, the Tolman cone angle and %VBur are prominent among these indices. Actually, steric effects can also be described using the concept of steric bulk, which refers to the space occupied by a molecule or functional group. Steric bulk can affect the solubility, melting point, boiling point, and viscosity of a substance. Even though electronic indices are more widely used, they have certain drawbacks that might shift preferences towards others. They present a higher computational cost, and often, the weight of electronics in correlation with chemical properties, e.g. binding energies, falls short in comparison to %VBur. However, it is worth noting that this may be because the steric index inherently captures part of the electronic content. Overall, steric indices play an important role in understanding the behaviour of chemical compounds and can be used to predict their reactivity, stability, and physical properties. Predictive chemistry is an approach to chemical research that uses computational methods to anticipate the properties and behaviour of these compounds and reactions, facilitating the design of new compounds and reactivities. Within this domain, predictive catalysis specifically targets the prediction of the performance and behaviour of catalysts. Ultimately, the goal is to identify new catalysts with optimal properties, leading to chemical processes that are both more efficient and sustainable. In this framework, %VBur can be a key metric for deepening our understanding of catalysis, emphasizing predictive catalysis and sustainability. Those latter concepts are needed to direct our efforts toward identifying the optimal catalyst for any reaction, minimizing waste, and reducing experimental efforts while maximizing the efficacy of the computational methods.

Selective Formal Carbene Insertion into Carbon-Boron Bonds of Diboronates by N-Trisylhydrazones

Bisborylalkanes play important roles in organic synthesis as versatile bifunctional reagents. The two boron moieties in these compounds can be selectively converted into other functional groups through cross-coupling, oxidation or radical reactions. Thus, the development of efficient methods for synthesizing bisborylalkanes is highly demanded. Herein we report a new strategy to access bisborylalkanes through the reaction of N-trisylhydrazones with diboronate, in which the bis(boryl) methane is transformed into 1,2-bis(boronates) via formal carbene insertion. Since the N-trisylhydrazones can be readily derived from the corresponding aldehydes, this strategy represents a practical synthesis of 1,2-diboronates with broad substrate scope. Mechanistic studies reveal an unusual neighboring group effect of 1,1-bis(boronates), which accounts for the observed regioselectivity when unsymmetric 1,1-diboronates are applied.

Relative rates of alkylation for B-substituted triarylphosphines: an ortho-Boron group enhances reactivity on phosphorus

Advancements in main-group catalysis are contingent on our ability to quantify effects that enhance reactivity in these systems. Herein we report the rates of alkylation for several substituted phosphines. We report that by incorporating a single pinacol boronic ester group in the ortho-position on triphenylphosphine, the rate of substitution with benzyl bromide is approximately 4.7 times faster than the parent compound as measured by initial rates. The corresponding meta- and para-isomers are only 1.3 and 1.5 times as fast, respectively. Using X-ray crystallographic data and quantum chemical calculations, we propose this rate acceleration occurs from an O to P electrostatic interaction that stabilizes the transition state.

Catalysis with Diboron(4)/Pyridine: Application to the Broad-Scope [3 + 2] Cycloaddition of Cyclopropanes and Alkenes

In contrast to the extensive but non-recyclable use of tetraalkoxydiboron(4) compounds as stoichiometric reagents in diverse reactions, this article reports an atom-economical reaction using a commercial diboron(4) as the catalyst. The key to success was designing a catalytic cycle for radical [3 + 2] cycloaddition involving a pyridine cocatalyst to generate from the diboron(4) catalyst and reversibly mediate the transfer of boronyl radicals. In comparison with known [3 + 2] cycloaddition with transition metal-based catalysts, the current reaction features not only metal-free conditions, inexpensive and stable catalysts, and simple operation but also remarkably broadened substrate scope. In particular, previously unusable cyclopropyl ketones without an activating group and/or alkenes with 1,2-disubstitution and 1,1,2-trisubstitution patterns were successfully used for the first time. Consequently, challenging cyclopentane compounds with various levels of substitution (65 examples, 57 new products, up to six substituents at all five ring atoms) were readily prepared in generally high to excellent yield and diastereoselectivity. The reaction was also successfully applied in concise formal synthesis of an anti-obesity drug and building natural product-like complex bridged or spirocyclic compounds. Mechanistic experiments and computational investigation support the proposed radical relay catalysis featuring a pyridine-assisted boronyl radical catalyst. Overall, this work demonstrates the first approach to use tetraalkoxydiboron(4) compounds as catalysts and may lead to the development of new, green, and efficient transition metal-like boron-catalyzed organic reactions.

In Situ Studies of Arylboronic Acids/Esters and R3SiCF3 Reagents: Kinetics, Speciation, and Dysfunction at the Carbanion-Ate Interface

Reagent instability reduces the efficiency of chemical processes, and while much effort is devoted to reaction optimization, less attention is paid to the mechanistic causes of reagent decomposition. Indeed, the response is often to simply use an excess of the reagent. Two reaction classes with ubiquitous examples of this are the Suzuki-Miyaura cross-coupling of boronic acids/esters and the transfer of CF₃ or CF₂ from the Ruppert-Prakash reagent, TMSCF₃. This Account describes some of the overarching features of our mechanistic investigations into their decomposition. In the first section we summarize how specific examples of (hetero)arylboronic acids can decompose via aqueous protodeboronation processes: Ar-B(OH)₂ + H₂O → ArH + B(OH)₃. Key to the analysis was the development of a kinetic model in which pH controls boron speciation and heterocycle protonation states. This method revealed six different protodeboronation pathways, including self-catalysis when the pH is close to the pK_a of the boronic acid, and protodeboronation via a transient aryl anionoid pathway for highly electron-deficient arenes. The degree of "protection" of boronic acids by diol-esterification is shown to be very dependent on the diol identity, with six-membered ring esters resulting in faster protodeboronation than the parent boronic acid. In the second section of the Account we describe ¹⁹F NMR spectroscopic analysis of the kinetics of the reaction of TMSCF₃ with ketones, fluoroarenes, and alkenes. Processes initiated by substoichiometric "TBAT" ([Ph₃SiF₂][Bu₄N]) involve anionic chain reactions in which low concentrations of [CF₃]^- are rapidly and reversibly liberated from a siliconate reservoir, [TMS(CF₃)₂][Bu₄N]. Increased TMSCF₃ concentrations reduce the [CF₃]^- concentration and thus inhibit the rates of CF₃ transfer. Computation and kinetics reveal that the TMSCF₃ intermolecularly abstracts fluoride from [CF₃]^- to generate the CF₂, in what would otherwise be an endergonic α-fluoride elimination. Starting from [CF₃]^- and CF₂, a cascade involving perfluoroalkene homologation results in the generation of a hindered perfluorocarbanion, [C₁₁F₂₃]^-, and inhibition. The generation of CF₂ from TMSCF₃ is much more efficiently mediated by NaI, and in contrast to TBAT, the process undergoes autoacceleration. The process involves NaI-mediated α-fluoride elimination from [CF₃][Na] to generate CF₂ and a [NaI·NaF] chain carrier. Chain-branching, by [(CF₂)₃I][Na] generated in situ (CF₂ + TFE + NaI), causes autoacceleration. Alkenes that efficiently capture CF₂ attenuate the chain-branching, suppress autoacceleration, and lead to less rapid difluorocyclopropanation. The Account also highlights how a collaborative approach to experiment and computation enables mechanistic insight for control of processes.

Computational study of Cu-catalyzed 1,2-hydrocarboxylation of 1,3-dienes with CO2: Pauli repulsion-controlled regioselectivity of Cu–Bpin additions

The mechanism and origin of regioselectivity of Cu-catalyzed 1,2-hydrocarboxylation of 1,3-dienes with CO2 were computationally investigated. The results show that CO2 not only acts as a carboxylation reagent, but also...

London Dispersion Helps Refine Steric A-Values: Dispersion Energy Donor Scales

We suggest a scale of dispersion energy donors (DEDs) that allows for direct comparisons with steric effects. This scale is based on the classic A-values and allows groups to reorient to minimize strain, thereby providing an advantage over raw group polarizabilities. The A-value can no longer be considered purely a steric factor. Even for groups that do not participate in charge transfer or electrostatic interactions, the A-value includes Pauli repulsion (steric hindrance) and attractive London dispersion (LD) interactions. Although the common assumption is that, at the distances found in monosubstituted cyclohexanes, steric demands are the key factors influencing conformer preferences, we show in this computational study that there is a non-negligible LD part. We use this system to build a DED scale and a complementary steric scale. These scales are quantitatively comparable, as they are based on the same system, and allow for comparison of the two competing interactions in experimentally relevant settings. In addition, we show that LD interactions can be used to explain puzzling data regarding relative group sizes.

Stereodivergent Access to Trisubstituted Alkenylboronate Esters through Alkene Isomerization

We report an efficient method for the preparation of synthetically valuable trisubstituted alkenylboronate esters through alkene isomerization of their readily available 1,1-disubstituted regioisomeric counterparts. Either stereoisomer of the target alkenylboronate motif can be obtained at will from the same starting material by employing different isomerization catalysts.

Bridge Functionalisation of Bicyclo[1.1.1]pentane Derivatives

"Escaping from flatland", by increasing the saturation level and three-dimensionality of drug-like compounds, can enhance their potency, selectivity and pharmacokinetic profile. One approach that has attracted considerable recent attention is the bioisosteric replacement of aromatic rings, internal alkynes and tert-butyl groups with bicyclo[1.1.1]pentane (BCP) units. While functionalisation of the tertiary bridgehead positions of BCP derivatives is well-documented, functionalisation of the three concyclic secondary bridge positions remains an emerging field. The unique properties of the BCP core present considerable synthetic challenges to the development of such transformations. However, the bridge positions provide novel vectors for drug discovery and applications in materials science, providing entry to novel chemical and intellectual property space. This Minireview aims to consolidate the major advances in the field, serving as a useful reference to guide further work that is expected in the coming years.

A Convergent, Stereoselective Route to Trisubstituted Alkenyl Boronates

A modular, stereoselective route to trisubstituted (Z)-alkenyl (MIDA)boronates is described, consisting of the radical addition-fragmentation of dithiocarbonates to 2-(MIDA)boronyl-3-(2'-fluoro-pyridyl-6'-oxy)-alkenes. The bulky (MIDA)boronate ensures a highly stereoselective fragmentation that is enhanced by the poor stabilization of the radical adjacent to the tetravalent boron atom. The vinyl boronate precursors are prepared from propargyl alcohols by copper-catalyzed regioselective protoboration of their fluoropyridoxy derivatives, with the fluoropyridine acting as an internal directing group.

Highly stereoselective syntheses of (E)-δ-boryl-anti-homoallylic alcohols via allylation with α-boryl-(E)-crotylboronate

A highly stereoselective synthesis of (E)-δ-boryl-anti-homoallylic alcohols is developed. In the presence of a Lewis acid, aldehyde allylation with α-boryl-(E)-crotylboronate gave δ-boryl-anti-homoallylic alcohols in good yields with excellent E-selectivity. The E-vinylboronate group in the products provides a useful handle for cross-coupling reactions as illustrated in the fragment synthesis of chaxamycins.

Generation of α-Boryl Radicals by H. Transfer and their Use in Cycloisomerizations

Carbon-centered radicals can be stabilized by delocalization of their spin density into the vacant p orbital of a boron substituent. α-Vinyl boronates, in particular pinacol (Bpin) derivatives, are excellent hydrogen atom acceptors. Under H2 , in the presence of a cobaloxime catalyst, they generate α-boryl radicals; these species can undergo 5-exo radical cyclizations if appropriate double bond acceptors are present, leading to densely functionalized heterocycles with tertiary substituents on Bpin. The reaction shows good functional group tolerance with wide scope, and the resulting boronate products can be converted into other useful functionalities.

An intramolecular coupling approach to alkyl bioisosteres for the synthesis of multisubstituted bicycloalkyl boronates

Bicyclic hydrocarbons, and bicyclo[1.1.1]pentanes (BCPs) in particular, are playing an emerging role as saturated bioisosteres in pharmaceutical, agrochemical and materials chemistry. Taking advantage of strain-release strategies, prior synthetic studies have featured the synthesis of bridgehead-substituted (C1, C3) BCPs from [1.1.1]propellane. Here, we describe an approach to access multisubstituted BCPs via intramolecular cyclization. In addition to C1,C3-disubstituted BCPs, this method also enables the construction of underexplored multisubstituted (C1, C2 and C3) BCPs from readily accessible cyclobutanones. The broad generality of this method has also been examined through the synthesis of a variety of other caged bicyclic molecules, ranging from [2.1.1] to [3.2.1] scaffolds. The modularity afforded by the pendant bridgehead boron pinacol esters generated during the cyclization reaction has been demonstrated through several downstream functionalizations, highlighting the ability of this approach to enable the programmed and divergent synthesis of multisubstituted bicyclic hydrocarbons.

Protodeboronation of (Hetero)Arylboronic Esters: Direct versus Prehydrolytic Pathways and Self-/Auto-Catalysis

The kinetics and mechanism of the base-catalyzed hydrolysis (ArB(OR)₂ → ArB(OH)₂) and protodeboronation (ArB(OR)₂ → ArH) of a series of boronic esters, encompassing eight different polyols and 10 polyfluoroaryl and heteroaryl moieties, have been investigated by in situ and stopped-flow NMR spectroscopy (¹⁹F, ¹H, and ¹¹B), pH-rate dependence, isotope entrainment, ²H KIEs, and KS-DFT computations. The study reveals the phenomenological stability of boronic esters under basic aqueous-organic conditions to be highly nuanced. In contrast to common assumption, esterification does not necessarily impart greater stability compared to the corresponding boronic acid. Moreover, hydrolysis of the ester to the boronic acid can be a dominant component of the overall protodeboronation process, augmented by self-, auto-, and oxidative (phenolic) catalysis when the pH is close to the pK_a of the boronic acid/ester.

3× Axial vs 3× Equatorial: The ΔGGA Value Is a Robust Computational Measure of Substituent Steric Effects

We define ΔG_GA as the free energy change for the formal equilibrium: [13]G-H + 1-X-adamantane → [13]G-X + adamantane, where [13]G-H is the C₁₃H₂₂ fragment of all-trans graphane with 3-fold symmetry. This compares with a situation where the group X is equatorial to three cyclohexane rings with one where it is axial to three rings. ΔG_GA values vary from 2.9 (CN) to 145.7 kJ mol^-1 (CCl₃), and this wide range means that ΔG can be calculated with confidence. ΔG_GA values for Me, Et, i-Pr, and t-Bu form a regular series, 34.9, 63.3, 101.6, and 142.0, and clearly reflect the steric size of the groups. We propose a model where the six axial hydrogens surrounding X on [13]G-X provide a nearly circular constriction on the substituent close to its point of attachment but which does not extend far above this. We compare these results with A values and with calculations on 2- and 7-substituted [1(2,3)4]pentamantanes. We show that electronic effects on ΔG_GA values are negligible but that they correlate well with computed cone and solid angles subtended by the substituent.

Stereoselective Diels-Alder Reactions of gem-Diborylalkenes: Toward the Synthesis of gem-Diboron-Based Polymers

Although gem-diborylalkenes are known to be among the most valuable reagents in modern organic synthesis, providing a rapid access to a wide array of transformations, including the construction of C-C and C-heteroatom bonds, their use as dienophile-reactive groups has been rare. Herein we report the Diels-Alder (DA) reaction of (unsymmetrical) gem-diborylalkenes. These reactions provide a general and efficient method for the stereoselective conversion of gem-diborylalkenes to rapidly access 1,1-bisborylcyclohexenes. Using the same DA reaction manifold with borylated-dienes and gem-diborylalkenes, we also developed a concise, highly regioselective synthesis of 1,1,2-tris- and 1,1,3,4-tetrakis(boronates)cyclohexenes, a family of compounds that currently lack efficient synthetic access. Furthermore, DFT calculations provided insight into the underlying factors that control the chemo-, regio-, and stereoselectivity of these DA reactions. This method also provides stereodivergent syntheses of gem-diborylnorbornenes. The utility of the gem-diborylnorbornene building blocks was demonstrated by ring-opening metathesis polymerization (ROMP), providing a highly modular approach to the first synthesis of the gem-diboron-based polymers. Additionally, these polymers have been successfully submitted to postpolymerization modification reactions. Given its simplicity and versatility, we believe that this novel DA and ROMP approach holds great promise for organoboron synthesis as well as organoboron-based polymers and that it will result in more novel transformations in both academic and industrial research.

A Tutorial on Selectivity Determination in C(sp2)-H Oxidative Addition of Arenes by Transition Metal Complexes

A Tutorial on factors that determine the selectivity in C(sp²)–H activation and functionalization reactions involving two-electron oxidative addition processes with transition metals is presented. The interplay of the thermodynamics of C(sp²)–H oxidative addition and kinetic influences upon regioselectivity are presented alongside pedagogically valuable experimental and computational results from the literature. Mechanisms and energetics of chelate-assisted C(sp²)–H oxidative addition are examined, as are concepts related to chemoselectivity in the oxidative addition of C(sp²)–H or C(sp²)–X (X = F, Cl, Br, I) bonds with aryl halide substrates.

Stereo- and Enantioselective Synthesis of Propionate-Derived Trisubstituted Alkene Motifs

We report a new method for constructing propionate-derived trisubstituted alkene motifs in a stereoselective manner. 1-Substituted 1,1-di(pinacolatoboryl)-(E)-alk-2-enes are generated in situ from 1-substituted 1,1-di(pinacolatoboryl)alk-3-enes through ruthenium(II)-catalyzed double-bond transposition. These species undergo a chiral phosphoric acid catalyzed allylation reaction of aldehydes to produce the E isomers of anti-homoallylic alcohols. On the other hand, the corresponding Z isomers of anti-homoallylic alcohols are obtained when a dimeric palladium(I) complex is employed as the catalyst for this double-bond transposition. Thus, both E and Z isomers can be synthesized from the same starting materials. A B-C(sp² ) bond remaining with the allylation product undergoes the Suzuki-Miyaura cross-coupling reaction to furnish a propionate-derived trisubstituted alkene motif in a stereo-defined form. The present method to construct the motifs with (E)- and (Z)-alkenes are successfully applied to the syntheses of (+)-isotrichostatic acid, (-)-isotrichostatin RK, and (+)-trichostatic acid, respectively.

Convergent Synthesis of Fluoroalkenes Using a Dual-Reactive Unit

Fluoroalkenes have shown importance as a metabolically stable isostere of amide compounds. To expedite the synthesis of diverse fluoroalkenes, we have developed a dual-reactive C2-unit, (Z)-1-boryl-1-fluoro-2-tosyloxyethene, containing nucleophilic and electrophilic moieties. Consecutive palladium-catalyzed cross-coupling reactions of this unit with aryl bromides and aryl boronic acids allow for the convergent synthesis of diverse trans-1,2-diaryl-substituted fluoroethenes in a chemoselective and stereoretentive manner.

Organocatalytic Synthesis of α-Trifluoromethyl Allylboronic Acids by Enantioselective 1,2-Borotropic Migration

Chiral α-substituted allylboronic acids were synthesized by asymmetric homologation of alkenylboronic acids using CF₃/TMS-diazomethanes in the presence of BINOL catalyst and ethanol. The chiral α-substituted allylboronic acids were reacted with aldehydes or oxidized to alcohols in situ with a high degree of chirality transfer. The oxygen-sensitive allylboronic acids can be purified via their isolated diaminonaphthalene (DanH)-protected derivatives. The highly reactive purified allylboronic acids reacted in a self-catalyzed reaction at room temperature with ketones, imines, and indoles to give congested trifluoromethylated homoallylic alcohols/amines with up to three contiguous stereocenters.