Electrochemiluminescence Loss in Photobleaching

Ratiometric electrochemiluminescence sensing and intracellular imaging of ClO- via resonance energy transfer

Electrochemiluminescence resonance energy transfer (ECL-RET) is a versatile signal transduction strategy widely used in the fabrication of chem/biosensors. However, this technique has not yet been applied in visualized imaging analysis of intracellular species due to the insulating nature of the cell membrane. Here, we construct a ratiometric ECL-RET analytical method for hypochlorite ions (ClO-) by ECL luminophore, with a luminol derivative (L-012) as the donor and a fluorescence probe (fluorescein hydrazide) as the acceptor. L-012 can emit a strong blue ECL signal and fluorescein hydrazide has negligible absorbance and fluorescence signal in the absence of ClO-. Thus, the ECL-RET process is turned off at this time. In the presence of ClO-, however, the closed-loop hydrazide structure in fluorescein hydrazide is opened via specific recognition with ClO-, accompanied with intensified absorbance and fluorescence signal. Thanks to the spectral overlap between the ECL spectrum of L-012 and the absorption spectrum of fluorescein, the ECL-RET effect is gradually recovered with the addition of ClO-. Furthermore, the ECL-RET system has been successfully applied to image intracellular ClO-. Although the insulating nature of the cell itself can generate a shadow ECL pattern in the cellular region, extracellular ECL emission penetrates the cell membrane and excites intracellular fluorescein generated by the reactions between fluorescein hydrazide and ClO-. The cell imaging strategy via ECL-RET circumvents the blocking of the cell membrane and enables assays of intracellular species. The importance of the ECL-RET platform lies in calibrating the fluctuation from the external environment and improving the selectivity by using fluorescent probes. Therefore, this ratiometric ECL sensor has shown broad application prospects in the identification of targets in clinical diagnosis and environmental monitoring.

Dynamic Monitoring of Time-Dependent Evolution of Biomolecules Using Quantum Dots-Based Biosensors Assemblies

The dynamic monitoring of biomolecules that are part of cell membranes generally constitutes a challenge. Electrochemiluminescence (ECL) biosensor assemblies provide clear advantages concerning microscopic imaging. Therefore, this paper proposes and analyzes a quantum dots-based biosensor assembly. Thus, particular attention is granted to biomolecules that are part of cell membranes. Additionally, this paper describes and analyzes a quantum dots-based biosensor assembly, which is used to implement a fully functional color ECL visualization system that allows for cellular and biomolecular structures to be accurately visualized. The related nano-emitter allows the implementation of real-time bioimaging scenarios. Consequently, the proposed approach is thoroughly evaluated relative to the time-dependent evolution of biomolecules. It has been demonstrated that traditionally problematic structures, like the biomolecules that are part of cell membranes, can be studied and monitored relative to their time-dependent dynamic evolution using the proposed solution. The reported research process has been conducted in the realm of cooperation with a specialized biomedical engineering company, and the described results are expected to substantially support a better understanding of the biomolecules' time-dependent dynamic evolution.

Electrochemiluminescence Microscopy

Electrochemiluminescence (ECL) is rapidly evolving from an analytical method into an optical microscopy. The orthogonality of the electrochemical trigger and the optical readout distinguishes it from classic microscopy and electrochemical techniques, owing to its near-zero background, remarkable sensitivity, and absence of photobleaching and phototoxicity. In this minireview, we summarize the recent advances in ECL imaging technology, emphasizing original configurations which enable the imaging of biological entities and the improvement of the analytical properties by increasing the complexity and multiplexing of bioassays. Additionally, mapping the (electro)chemical reactivity in space provides valuable information on nanomaterials and facilitates deciphering ECL mechanisms for improving their performances in diagnostics and (electro)catalysis. Finally, we highlight the recent achievements in imaging at the ultimate limits of single molecules, single photons or single chemical reactions, and the current challenges to translate the ECL imaging advances to other fields such as material science, catalysis and biology.

Photochemical Strategies toward Precision Targeting against Multidrug-Resistant Bacterial Infections

Infectious diseases pose a serious threat and a substantial economic burden on global human and public health security, especially with the frequent emergence of multidrug-resistant (MDR) bacteria in clinical settings. In response to this urgent need, various photobased anti-infectious therapies have been reported lately. This Review explores and discusses several photochemical targeted antibacterial therapeutic strategies for addressing bacterial infections regardless of their antibiotic susceptibility. In contrast to conventional photobased therapies, these approaches facilitate precise targeting of pathogenic bacteria and/or infectious microenvironments, effectively minimizing toxicity to mammalian cells and surrounding healthy tissues. The highlighted therapies include photodynamic therapy, photocatalytic therapy, photothermal therapy, endogenous pigments-based photobleaching therapy, and polyphenols-based photo-oxidation therapy. This comprehensive exploration aims to offer updated information to facilitate the development of effective, convenient, safe, and alternative strategies to counter the growing threat of MDR bacteria in the future.

Electrochemiluminescence-Based Single-Particle Tracking of the Biomolecules Moving along Intercellular Membrane Nanotubes between Live Cells

Electrochemiluminescence (ECL) imaging, a rapidly evolving technology, has attracted significant attention in the field of cellular imaging. However, its primary limitation lies in its inability to analyze the motion behaviors of individual particles in live cellular environments. In this study, we leveraged the exceptional ECL properties of quantum dots (QDs) and the excellent electrochemical properties of carbon dots (CDs) to develop a high-brightness ECL nanoprobe (CDs-QDs) for real-time ECL imaging between living cells. This nanoprobe has excellent signal-to-noise ratio imaging capabilities for the single-particle tracking (SPT) of biomolecules. Our finding elucidated the enhanced ECL mechanism of CDs-QDs in the presence of reactive oxygen species through photoluminescence, electrochemistry, and ECL techniques. We further tracked the movement of single particles on membrane nanotubes between live cells and confirmed that the ECL-based SPT technique using CD-QD nanoparticles is an effective approach for monitoring the transport behaviors of biomolecules on membrane nanotubes between live cells. This opens a promising avenue for the advancement of ECL-based single-particle detection and the dynamic quantitative imaging of biomolecules.

Wireless rotating bipolar electrochemiluminescence for enzymatic detection

New dynamic, wireless and cost-effective analytical devices are developing rapidly in biochemical analysis. Here, we report on a remotely-controlled rotating electrochemiluminescence (ECL) sensing system for enzymatic detection of a model analyte, glucose, on both polarized sides of an iron wire acting as a bipolar electrode. The iron wire is controlled by double contactless mode, involving remote electric field polarization, and magnetic field-induced rotational motion. The former triggers the interfacial polarization of both extremities of the wire by bipolar electrochemistry, which generates ECL emission of the luminol derivative (L-012) with the enzymatically produced hydrogen peroxide in presence of glucose, at both anodic and cathodic poles, simultaneously. The latter generates a convective flow, leading to an increase in mass transfer and amplifying the corresponding ECL signals. Quantitative glucose detection in human serum samples is achieved. The ECL signals were found to be a linear function of the glucose concentration within the range of 10-1000 μM and with a limit of detection of 10 μM. The dynamic bipolar ECL system simultaneously generates light emissions at both anodic and cathodic poles for glucose detection, which can be further applied to biosensing and imaging in autonomous devices.

Controllable and Low-Loss Electrochemiluminescence Waveguide Supported by a Micropipette Electrode

One-dimensional molecular crystal waveguide (MCW) can transmit self-generated electrochemiluminescence (ECL), but heavy optical loss occurs because of the small difference in the refractive index between the crystal and its surroundings. Herein, we report a micropipette electrode-supported MCW (MPE/MCW) for precisely controlling the far-field transmission of ECL in air with a low optical loss. ECL is generated from one terminal of the MCW positioned inside the MPE, which is transmitted along the MCW to the other terminal in air. In comparison with conventional waveguides on solid substrates or in solutions, the MPE/MCW is propitious to the total internal reflection of light at the MCW/air interface, thus confining the ECL efficiently in MCW and improving the waveguide performance with an extremely low-loss coefficient of 4.49 × 10-3 dB μm-1. Moreover, by regulation of the gas atmosphere, active and passive waveguides can be resolved simultaneously inside MPE and in air. This MPE/MCW offers a unique advantage of spatially controlling and separating ECL signal readout from its generation, thus holding great promise in biosensing without or with less electrical/chemical disturbance.

All-Optical Electrochemiluminescence at Metal-Insulator-Semiconductor Diodes

Pt/InGa/n-Si/SiOx/Pt devices were prepared by using standard chemical and sputtering processes. These systems are diodes comprising a frontside photoactive metal-insulator-semiconductor (MIS) n-Si/SiOx/Pt junction and a backside Pt/InGa/n-Si Ohmic contact. Pt/InGa/n-Si/SiOx/Pt was first characterized by dark-solid-state electrical and impedance measurements. Then, each side of the device was investigated by electrochemical means in the dark and under near-IR illumination at 850 nm in the luminol-H2O2 electrochemiluminescence (ECL) electrolyte. The results suggested the possibility of triggering an all-optical ECL (AO-ECL) at Pt/InGa/n-Si/SiOx/Pt. This was confirmed by studying AO-ECL at the monolithic, all-integrated Pt/InGa/n-Si/SiOx/Pt device, immersed in the ECL electrolyte. The conversion process can occur with good stability and the intensity of the visible emission (440 nm) depends on tunable parameters such as the illumination power density, O2 concentration, or the concentration of added H2O2. These results are important for the next developments of AO-ECL in sensing and microscopy.

Optics Determines the Electrochemiluminescence Signal of Bead-Based Immunoassays

Electrochemiluminescence (ECL) is an optical readout technique that is successfully applied for the detection of biomarkers in body fluids using microbead-based immunoassays. This technology is of utmost importance for in vitro diagnostics and thus a very active research area but is mainly focused on the quest for new dyes and coreactants, whereas the investigation of the ECL optics is extremely scarce. Herein, we report the 3D imaging of the ECL signals recorded at single microbeads decorated with the ECL labels in the sandwich immunoassay format. We show that the optical effects due to the light propagation through the bead determine mainly the spatial distribution of the recorded ECL signals. Indeed, the optical simulations based on the discrete dipole approximation compute rigorously the electromagnetic scattering of the ECL emission by the microbead and allow for reconstructing the spatial map of ECL emission. Thus, it provides a global description of the ECL chemical reactivity and the associated optics. The outcomes of this 3D imaging approach complemented by the optical modeling provide insight into the ECL optics and the unique ECL chemical mechanism operating on bead-based immunoassays. Therefore, it opens new directions for mechanistic investigations, ultrasensitive ECL bioassays, and imaging.

Application and outlook of electrochemical technology in single-cell analysis

Cellular heterogeneity, especially in some important diseased cells like tumor cells, acts as an invisible driver for disease development like cancer progression in the tumor ecosystem, contributing to differences in the macroscopic and microscopic detection of disease lesions like tumors. Traditional analysis techniques choose group information masked by the mean as the analysis sample, making it difficult to achieve precise diagnosis and target treatment, on which could be shed light via the single-cell level determination/bioanalysis. Hence, in this article we have reviewed the special characteristic differences among various kinds of typical single-cell bioanalysis strategies and electrochemical techniques, and then focused on the recent advance and special bio-applications of electrochemiluminescence and micro-nano electrochemical sensing mediated in single-cell bioimaging & bioanalysis. Especially, we have summarized the relevant research exploration of the possibility to establish the in-situ single-cell electrochemical methods to detect cell heterogeneity through determination of specific biomolecules and bioimaging of some important biological processes. Eventually, this review has explored some important advances of electrochemical single-cell detection techniques for the real-time cellular bioimaging and diagnostics of some disease lesions like tumors. It raises the possibility to provide the specific in-situ platform to exploit the versatile, sensitive, and high-resolution electrochemical single-cell analysis for the promising biomedical applications like rapid tracing of some disease lesions or in vivo bioimaging for precise cancer theranostics.

Site-selective heat boosting electrochemiluminescence for single cell imaging

In operando visualization of local electrochemical reactions provides mechanical insights into the dynamic transport of interfacial charge and reactant/product. Electrochemiluminescence is a crossover technique that quantitatively determines Faraday current and mass transport in a straightforward manner. However, the sensitivity is hindered by the low collision efficiency of radicals and side reactions at high voltage. Here, we report a site-selective heat boosting electrochemiluminescence microscopy. By generating a micron-scale heat point in situ at the electrode-solution interface, we achieved an enhancement of luminescence intensity up to 63 times, along with an advance of 0.2 V in applied voltage. Experimental results and finite element simulation demonstrate that the fundamental reasons are accelerated reaction rate and thermal convection via a photothermal effect. The concentrated electrochemiluminescence not only boosts the contrast of single cells by 20.54 times but also enables the site-selective cell-by-cell analysis of the heterogeneous membrane protein abundance. This electrochemical visualization method has great potential in the highly sensitive and selective analysis of local electron transfer events.

Array electrochemiluminescence device with ultra-high sensitivity and selectivity for rapid visualized monitoring of trace radon in environment

The World Health Organization has reported radioactive Rn gas as the second leading cause of lung cancer and gives an extreme limit to indoor Radon (Rn) concentration as 100 Bq/m³. To realize rapid and accurate Rn monitoring, we report an efficient visualized electrochemiluminescence (ECL) device for Rn detection with the lowest limit of detection (0.9 Bq/m³/3.6 Bq h m^-3) compared to known Rn detection methods and the shortest measurement time (less than 5 h) among non-pump methods. In detail, an efficient Rn probe is prepared by Au nanoparticles, Pb²⁺ aptamer, as well as NH₂-ssDNA co-reactant and then modified on ITO electrodes to obtain Rn detection devices. With tris(2,2'-bipyridyl)ruthenium(II)chloride (Ru(bpy)₃Cl₂) as an ECL emitter, the devices can exhibit ultra-high sensitivity and selectivity to trace Rn in environment via the ECL quenching caused by ²¹⁰Pb, the relatively stable decay product of Rn. Furthermore, ECL imaging technology can be applied to realize the visualized Rn detection. An efficient up-response ECL detector was also invented to support this detection device to achieve accurate Rn detection in environment. This work reports noble gas ECL detection for the first time and provides an efficient strategy for rapid and accurate monitoring of trace Rn in environment.

Recent Advances in Single Cell Analysis by Electrochemiluminescence

Understanding biological mechanisms operating in cells is one of the major goals of biology. Since heterogeneity is the fundamental property of cellular systems, single cell measurements can provide more accurate information about the composition, dynamics, and regulatory circuits of cells than population-averaged assays. Electrochemiluminescence (ECL), the light emission triggered by electrochemical reactions, is an emerging approach for single cell analysis. Numerous analytes, ranging from small biomolecules such as glucose and cholesterol, proteins and nucleic acids to subcellular structures, have been determined in single cells by ECL, which yields new insights into cellular functions. This review aims to provide an overview of research progress on ECL principles and systems for single cell analysis in recent years. The ECL reaction mechanisms are briefly introduced, and then the advances and representative works in ECL single cell analysis are summarized. Finally, outlooks and challenges in this field are addressed.

Electrochemiluminescence Amplification in Bead-Based Assays Induced by a Freely Diffusing Iridium(III) Complex

Heterogeneous electrochemiluminescence (ECL) assays employing tri-n-propylamine as a co-reactant and a tris(2,2'-bipyridine)ruthenium(II) ([Ru(bpy)₃]²⁺) derivative as an emissive label are integral to the majority of academic and commercial applications of ECL sensing. This model system is an active research area and constitutes the basis of successfully commercialized bead-based ECL immunoassays. Herein, we propose a novel approach to the enhancement of such conventional ECL assays via the incorporation of a second metal coordination complex, [Ir(sppy)₃]^3- (where sppy = 5'-sulfo-2-phenylpyridinato-C²,N), to the experimental system. By employing ECL microscopy, we are able to map the spatial distribution of ECL emission at the surface of the bead, from [Ru(bpy)₃]²⁺ labels, and solution-phase emission, from [Ir(sppy)₃]^3-. The developed [Ir(sppy)₃]^3--mediated enhancement approach elicited a significant improvement (70.9-fold at 0.9 V and 2.9-fold at 1.2 V vs Ag/AgCl) of the ECL signal from [Ru(bpy)₃]²⁺ labels immobilized on the surface of a polystyrene bead. This dramatic enhancement in ECL signal, particularly at low oxidation potentials, has important implications for the improvement of existing heterogeneous ECL assays and ECL-based microscopy, by amplifying the signal, opening new bioanalytical detection schemes, and reducing both electrode surface passivation and deleterious side reactions.

Direct Visualization of Nanoconfinement Effect on Nanoreactor via Electrochemiluminescence Microscopy

Nanoconfinement in mesoporous nanoarchitectures could dramatically change molecular transport and reaction kinetics during electrochemical process. A molecular-level understanding of nanoconfinement and mass transport is critical for the applications, but a proper route to study it is lacking. Herein, we develop a single nanoreactor electrochemiluminescence (SNECL) microscopy based on Ru(bpy)₃ ²⁺ -loaded mesoporous silica nanoparticle to directly visualize in situ nanoconfinement-enhanced electrochemical reactions at the single molecule level. Meanwhile, mass transport capability of single nanoreactor, reflected as long decay time and recovery ability, is monitored and simulated with a high spatial resolution. The nanoconfinement effects in our system also enable imaging single proteins on cellular membrane. Our SNECL approach may pave the way to decipher the nanoconfinement effects during electrochemical process, and build bridges between mesoporous nanoarchitectures and potential electrochemical applications.

Cathodic Electrochemiluminesence Microscopy for Imaging of Single Carbon Nanotube and Nucleolin at Single Tumor Cell

Cathodic electrochemiluminesence (ECL) microscopy based on luminol analog L012 was originally established to implement the imaging of a single nanotube and nucleolin on a single tumor cell. This microscopy utilizes multiwalled carbon nanotubes (MWCNTs) as advanced coreactant accelerators to efficiently convert dissolved oxygen (O₂) and H₂O₂ into reactive oxygen species (ROS) due to excellent electrocatalytic properties. The produced ROS could oxide L012 into an excited state of L012 leading to a bright cathodic ECL illumination, thereby promoting ECL imaging of MWCNTs at a low triggering potential. After being modified with AS1411 aptamers, MWCNTs@AS1411 probes were incubated with tumor cells for specific ECL imaging of nucleolin on the plasma membrane, which permits cathodic ECL microscopy for label-free bioassays without ECL tags. The L012-based cathodic ECL microscopy with a moderate operating potential and label-free characteristics provides a universal approach in single nanomaterial and single-cell imaging and analyses.

Optical Tissue Phantoms for Quantitative Evaluation of Surgical Imaging Devices

Optical tissue phantoms (OTPs) have been extensively applied to the evaluation of imaging systems and surgical training. Due to their human tissue-mimicking characteristics, OTPs can provide accurate optical feedback on the performance of image-guided surgical instruments, simulating the biological sizes and shapes of human organs, and preserving similar haptic responses of original tissues. This review summarizes the essential components of OTPs (i.e., matrix, scattering and absorbing agents, and fluorophores) and the various manufacturing methods currently used to create suitable tissue-mimicking phantoms. As photobleaching is a major challenge in OTP fabrication and its feedback accuracy, phantom photostability and how the photobleaching phenomenon can affect their optical properties are discussed. Consequently, the need for novel photostable OTPs for the quantitative evaluation of surgical imaging devices is emphasized.

Advances in electrochemiluminescence for single-cell analysis

Recent years have witnessed the emergence of innovative analytical methods with high sensitivity and spatiotemporal resolution that allowed qualitative and quantitative analysis to be carried out at single-cell and subcellular levels. Electrochemiluminescence (ECL) is a unique chemiluminescence of high-energy electron transfer triggered by electrical excitation. The ingenious combination of electrochemistry and chemiluminescence results in the distinct advantages of high sensitivity, a wide dynamic range and good reproducibility. Specifically, single-cell ECL (SCECL) analysis with excellent spatiotemporal resolution has emerged as a promising toolbox in bioanalysis for revealing individual cells' heterogeneity and stochastic processes. This review focuses on advances in SCECL analysis and bioimaging. The history and recent advances in ECL probes and strategies for system design are briefly reviewed. Subsequently, the latest advances in representative SCECL analysis techniques for bioassays, bioimaging and therapeutics are also highlighted. Then, the current challenges and future perspectives are discussed.

Boron Carbon Nitride Nanosheets-Ru Nanocomposite Self-Enhancement Electrochemiluminescence Emitter with a Three-Dimensional DNA Network Structure as a Signal Amplifier for Ultrasensitive Detection of TK1 mRNA

In this study, a neoteric self-enhanced nanocomposite boron carbon nitride nanosheets (BCN NSs)-Ru obtained by chemical crosslinking between boron carbon nitride nanosheets (BCN NSs) and tris (4,4'-dicarboxylicacid-2,2'-bipyridyl) ruthenium(II) dichloride (Ru(dcbpy)₃Cl₂) was used as an emitter to build an electrochemiluminescence (ECL) biosensor for ultrasensitive detection of the cancer marker human thymidine kinase 1 (TK1) mRNA. Importantly, the self-enhanced BCN NSs-Ru could exhibit strong ECL emission because boron radicals and amine groups derived from BCN NSs could significantly enhance the ECL response of Ru(dcbpy)₃Cl₂, which avoided the defects of the long electron transfer path and large energy loss between the emitter and coreactant in the traditional coreaction ECL system. Impressively, in the presence of target TK1 mRNA, three-dimensional DNA network structure-labeled numerous ferrocene probes could be assembled to quickly quench the ECL signal of BCN NSs-Ru, resulting in improved biosensor sensitivity. The obtained "on-off" biosensor showed excellent stability and high sensitivity with a detection limit of 32.3 aM. In general, the developed strategy provided a new biosensing way for ultrasensitive detection of biomolecules in early disease diagnosis.

Emerging Optical Microscopy Techniques for Electrochemistry

An optical microscope is probably the most intuitive, simple, and commonly used instrument to observe objects and discuss behaviors through images. Although the idea of imaging electrochemical processes operando by optical microscopy was initiated 40 years ago, it was not until significant progress was made in the last two decades in advanced optical microscopy or plasmonics that it could become a mainstream electroanalytical strategy. This review illustrates the potential of different optical microscopies to visualize and quantify local electrochemical processes with unprecedented temporal and spatial resolution (below the diffraction limit), up to the single object level with subnanoparticle or single-molecule sensitivity. Developed through optically and electrochemically active model systems, optical microscopy is now shifting to materials and configurations focused on real-world electrochemical applications.

Single Cell Imaging of Electrochemiluminescence-Driven Photodynamic Therapy

We report a photodynamic therapy driven by electrochemiluminescence (ECL). The luminescence generated by Ru(bpy)₃ ²⁺ and co-reactant tripropylamine (TPA) pair acts as both optical readout for ECL imaging, and light source for the excitation of photosensitizer to produce reactive oxygen species (ROS) in photodynamic therapy (PDT) system. The ECL-driven PDT (ECL-PDT) relies on the effective energy transfer from ECL emission to photosensitizer chlorin e6 (Ce6), which sensitizes the surrounding O₂ into ROS. The dynamic process of gradual morphological changes, the variation of cell-matrix adhesions, as well as the increase of cell membrane permeability in the process of ECL-PDT were monitored under ECL microscopy (ECLM) with good spatiotemporal resolution. Combining real-time imaging with ECL-PDT, this new strategy provides not only new insights into dynamic cellular processes, but also promising potential of ECL in clinical applications.

Lighting Up Electrochemiluminescence-Inactive Dyes via Grafting Enabled by Intramolecular Resonance Energy Transfer

Due to near-zero optical background and photobleaching, electrochemiluminescence (ECL), an optical phenomenon excited by electrochemical reactions, has drawn extensive attention, especially for ultrasensitive bioassays. Developing diverse ECL emitters is crucial to unlocking their multiformity and performances but remains a formidable challenge due to the rigorous requirements for ECL. Herein, we report a general strategy to light up ECL-inactive dyes in an aqueous solution via grafting, a well-developed concept for plant propagation since 500 BCE. As a proof of concept, a series of luminol donor-dye acceptor-based ECL emitters were grafted with near-unity resonance energy transfer (RET) efficiency and coarse/fine-tunable emission wavelengths. Rather than the sophisticated design of new skeleton-based molecules to meet all of the prerequisites for ECL in a constrained manner, each unit in the proposed ECL ensemble performed its functions maximally. As a result, beyond traditional two-dimensional (2D) ones, a three-dimensional (3D) coordinate biosensing system, simultaneously showing a calibration curve and selectivity, was established using the new ECL emitter. This lighting up strategy would generally address the scarcity of ECL emitters and enable unprecedented functions.

Electrochemiluminescent enantioselective detection with chiral-imprinted mesoporous metal surfaces

Chiral-imprinted mesoporous Pt-Ir alloy surfaces were combined in a synergetic way with electrochemiluminescence (ECL) to detect the two enantiomers of phenylalanine (PA) as a model compound, acting simultaneously as a...

Recent progress in electrochemiluminescence microscopy analysis of single cells

An overview of recent progress in electrochemiluminescence microscopy analysis of single cells classified according to different ECL routes, namely the oxidative-reduction, low oxidation potential, catalytic and direct oxidation routes.

Label-Free Electrochemiluminescence Imaging of Single-Cell Adhesions by Using Bipolar Nanoelectrode Array

A label-free and fast approach for positive electrochemiluminescence (ECL) imaging of single cells by bipolar nanoelectrode array is proposed. The reduction of oxygen at a platinized gold nanoelectrode array in a closed bipolar electrochemical system is coupled with an oxidative ECL process at the anodic side. For elevating the ECL imaging contrast of single cells, a driving voltage of -2.0 V is applied to in situ generate oxygen confined beneath cells that is subsequently used for ECL imaging at 1.1 V. High oxygen concentration in the confined space resulting from steric hindrance generates prominent oxygen reduction current at the cathodic side and higher ECL intensity at the anodic side, allowing positive ECL imaging of the cells adhesion region with excellent contrast. Cell morphology and adhesion strength can be successfully imaged with high image acquisition rate. This approach opens a new avenue for label-free imaging of single cells.

Shadow Electrochemiluminescence Microscopy of Single Mitochondria

Mitochondria are the subcellular bioenergetic organelles. The analysis of their morphology and topology is essential to provide useful information on their activity and metabolism. Herein, we report a label-free shadow electrochemiluminescence (ECL) microscopy based on the spatial confinement of the ECL-emitting reactive layer to image single living mitochondria deposited on the electrode surface. The ECL mechanism of the freely-diffusing [Ru(bpy)₃ ]²⁺ dye with the sacrificial tri-n-propylamine coreactant restrains the light-emitting region to a micrometric thickness allowing to visualize individual mitochondria with a remarkable sharp negative optical contrast. The imaging approach named "shadow ECL" (SECL) reflects the negative imprint of the local diffusional hindrance of the ECL reagents by each mitochondrion. The statistical analysis of the colocalization of the shadow ECL spots with the functional mitochondria revealed by classical fluorescent biomarkers, MitoTracker Deep Red and the endogenous intramitochondrial NADH, validates the reported methodology. The versatility and extreme sensitivity of the approach are further demonstrated by visualizing single mitochondria, which remain hardly detectable with the usual biomarkers. Finally, by alleviating problems of photobleaching and phototoxicity associated with conventional microscopy methods, SECL microscopy should find promising applications in the imaging of subcellular structures.

A Synergistic Coreactant for Single-Cell Electrochemiluminescence Imaging: Guanine-Rich ssDNA-Loaded High-Index Faceted Gold Nanoflowers

Developing an electrochemiluminescence (ECL) coreactant to minimize the biotoxicity and to maximize the enhancement factor is critical to single-cell ECL microscopy. Here, we reported a guanine-rich single-stranded DNA (G-ssDNA)-loaded high-index faceted gold nanoflower (Hi-AuNF) as a synergistic coreactant of Ru(bpy)₃²⁺ for single-cell ECL imaging. Because of the excellent catalytic performance and huge specific surface area, Hi-AuNF serves as not only an ECL enhancer but also a carrier for G-ssDNA. Guanine in G-ssDNA specifically reacts with Ru(bpy)₃²⁺ through a so-called "catalytic route" and thus significantly enhances the ECL signal of Ru(bpy)₃²⁺. To endow targeting ability to the synergistic coreactant, an aptamer of carcinoembryonic antigen (CEA) is incorporated into the G-ssDNA to form G-ssDNA-Apt for the recognition of human breast adenocarcinoma cells, which overexpress CEA on the cytomembrane. Accordingly, the ECL imaging of CEA on the cytomembrane was realized by using the highly selective Hi-AuNF@G-ssDNA-Apt as the probe as well as the luminophore of Ru(bpy)₃²⁺. Compared with the common coreactant tripropylamine with high toxicity and volatility, the Hi-AuNF@G-ssDNA-Apt is considered as a high-performance and biocompatible coreactant, providing exciting opportunities in single-cell imaging and detection.

Spatially Selective Imaging of Cell-Matrix and Cell-Cell Junctions by Electrochemiluminescence

Cell junctions are protein structures located at specific cell membrane domains that determine key processes in multicellular development. Here we report spatially selective imaging of cell junctions by electrochemiluminescence (ECL) microscopy. By regulating the concentrations of luminophore and/or co-reactant, the thickness of ECL layer can be controlled to match with the spatial location of different cell junctions. At a low concentration of luminophore, ECL generation is confined to the electrode surface, thus revealing only cell-matrix adhesions at the bottom of cells. While at a high concentration of luminophore, the ECL layer can be remarkably extended by decreasing the co-reactant concentration, thus allowing the sequential imaging of cell-matrix and cell-cell junctions at the bottom and near the apical surface of cells, respectively. This strategy not only provides new insights into the ECL mechanisms but also promises wide applications of ECL microscopy in bioimaging.

Electrogenerated chemiluminescence detection of single entities

Electrogenerated chemiluminescence, also known as electrochemiluminescence (ECL), is an electrochemically induced production of light by excited luminophores generated during redox reactions. It can be used to sense the charge transfer and related processes at electrodes via a simple visual readout; hence, ECL is an outstanding tool in analytical sensing. The traditional ECL approach measures averaged electrochemical quantities of a large ensemble of individual entities, including molecules, microstructures and ions. However, as a real system is usually heterogeneous, the study of single entities holds great potential in elucidating new truths of nature which are averaged out in ensemble assays or hidden in complex systems. We would like to review the development of ECL intensity and imaging based single entity detection and place emphasis on the assays of small entities including single molecules, micro/nanoparticles and cells. The current challenges for and perspectives on ECL detection of single entities are also discussed.