Efficient and Selective Interplay Revealed: CO2 Reduction to CO over ZrO2 by Light with Further Reduction to Methane over Ni0 by Heat Converted from Light

Photocatalytic CO2 Reduction Using an Osmium Complex as a Panchromatic Self-Photosensitized Catalyst: Utilization of Blue, Green, and Red Light

The photocatalytic reduction of carbon dioxide (CO2) represents an attractive approach for solar-energy storage and leads to the production of renewable fuels and valuable chemicals. Although some osmium (Os) photosensitizers absorb long wavelengths in the visible-light region, a self-photosensitized, mononuclear Os catalyst for red-light-driven CO2 reduction has not yet been exploited. Here, we discovered that the introduction of an Os metal to a PNNP-type tetradentate ligand resulted in the absorption of light with longer-wavelength (350-700 nm) and that can be applied to a panchromatic self-photosensitized catalyst for CO2 reduction to give mainly carbon monoxide (CO) with a total turnover number (TON) of 625 under photoirradiation (λ≥400 nm). CO2 photoreduction also proceeded under irradiation with blue (λ0=405 nm), green (λ0=525 nm), or red (λ0=630 nm) light to give CO with >90 % selectivity. The quantum efficiency using red light was determined to be 12 % for the generation of CO. A catalytic mechanism is proposed based on the detection of intermediates using various spectroscopic techniques, including transient absorption, electron paramagnetic resonance, and UV/Vis spectroscopy.

Integration of Co Single Atoms and Ni Clusters on Defect-Rich ZrO2 for Strong Photothermal Coupling Boosts Photocatalytic CO2 Reduction

We report a solvothermal method for the synthesis of an oxygen vacancy-enriched ZrO2 photocatalyst with Co single atoms and Ni clusters immobilized on the surface. This catalyst presents superior performance for the reduction of CO2 in H2O vapor, with a CO yield reaching 663.84 μmol g-1 h-1 and a selectivity of 99.52%. The total solar-to-chemical energy conversion efficiency is up to 0.372‰, which is among the highest reported values. The success, on one hand, depends on the Co single atoms and Ni clusters for both extended spectrum absorption and serving as dual-active centers for CO2 reduction and H2O dissociation, respectively; on the other hand, this is attributed to the enhanced photoelectric and thermal effect induced by concentrated solar irradiation. We demonstrate that an intermediate impurity state is formed by the hybridization of the d-orbital of single-atom Co with the molecular orbital of H2O, enabling visible-light-driven excitation over the catalyst. In addition, Ni clusters play a crucial role in altering the adsorption configuration of CO2, with the localized surface plasmon resonance effect enhancing the activation and dissociation of CO2 induced by visible-near-infrared light. This study provides valuable insights into the synergistic effect of the dual cocatalyst toward both efficient photothermal coupling and surface redox reactions for solar CO2 reduction.

Photocatalytic CO2 Reduction Using Ti3C2Xy (X = Oxo, OH, F, or Cl) MXene-ZrO2: Structure, Electron Transmission, and the Stability

CO2 photoreduction using a semiconductor-based photocatalyst is a promising option for completing a new carbon-neutral cycle. The short lifetime of charges generated owing to light energy is one of the most critical problems in further improving the performance of semiconductor-based photocatalysts. This study shows the structure, electron transmission, and stability of Ti3C2Xy (X = oxo, OH, F, or Cl) MXene combined with a ZrO2 photocatalyst. Using H2 as a reductant, the photocatalytic CO formation rate increased by 6.6 times to 4.6 μmol h-1 gcat-1 using MXene (3.0 wt %)-ZrO2 compared to that using ZrO2, and the catalytic route was confirmed using 13CO2 to form 13CO. In clear contrast, using H2O (gas) as a reductant, CH4 was formed as the major product using Ti3C2Xy MXene (5.0 wt %)-ZrO2 at the rate of 3.9 μmol h-1 gcat-1. Using 13CO2 and H2O, 12CH4, 12C2H6, and 12C3H8 were formed besides H212CO, demonstrating that the C source was the partial decomposition and hydrogenation of Ti3C2Xy. Using the atomic force and high-resolution electron microscopies, 1.6 nm thick Ti3C2Xy MXene sheets were observed, suggesting ∼3 stacked layers that are consistent with the Ti-C and Ti···Ti interatomic distances of 0.218 and 0.301 nm, respectively, forming a [Ti6C] octahedral coordination, and the major component as the X ligand was suggested to be F and OH/oxo, with the temperature increasing by 116 K or higher owing to the absorbed light energy, all based on the extended X-ray absorption fine structure analysis.

Heterophase junction engineering: Enhanced photo-thermal synergistic catalytic performance of CO2 reduction over 1T/2H-MoS2

Photocatalytic CO2 reduction technology has been proposed as a promising solution to the greenhouse effect and energy crisis. However, the lower quantum efficiency limits its practical applications. Here, we have significantly improved the photocatalytic CO2 reduction performance of MoS2 by coupling the heterophase junction (1T/2H-MoS2) construction and photo-thermal synergy strategies. At 200 °C and 42 mW·cm-2 of 420 nm LED irradiation, the CO production rate of 1T/2H-MoS2 reached 35.3 μmol·g-1·h-1, which was 3.5 and 2.8 times that of 1T-MoS2 and 2H-MoS2, respectively. In addition, only faint CO was detected under sole photo- or sole thermal catalysis conditions. Mechanism studies showed that COOH* was the key intermediate in the photo-thermal synergistic catalytic CO2 reduction over 1T/2H-MoS2. The heterophase junction engineering significantly facilitated the separation of photogenerated carriers, and the introduction of heat accelerated the charge migration and surface reaction rates. Our work provides innovative insights into the catalyst design and mechanism studies for photo-thermal synergistic catalytic CO2 reduction.

Efficient Solar-Driven CO2 Methanation and Hydrogen Storage Over Nickel Catalyst Derived from Metal-Organic Frameworks with Rich Oxygen Vacancies

Solar-driven photothermal conversion of carbon dioxide (CO2 ) to methane (CH4 ) is a promising approach to remedy energy shortage and climate changes, where highly efficient photothermal catalysts for CO2 methanation urgently need to be designed. Herein, nickel-based catalysts (Ni/ZrO2 ) derived from metal-organic frameworks (MOFs) are fabricated and studied for photothermal CO2 methanation. The optimized catalyst 50Ni/ZrO2 achieves a stable CH4 production rate of 583.3 mmol g-1  h-1 in a continuous stability test, which is almost tenfold higher than that of 50Ni/C-ZrO2 synthesized via commercial ZrO2 . Physicochemical properties indicate that 50Ni/ZrO2 generates more tetragonal ZrO2 and possesses more oxygen vacancies (OVs) as well as enhanced nickel-ZrO2 interaction. As a result, 50Ni/ZrO2 exhibits the strong abilities of light absorption and light-to-heat conversion, superior adsorption capacities of reactants (H2 , CO2 ), and an intermediate product (CO), which finally boosts CH4 formation. This work provides an efficient strategy to design a photothermocatalyst of CO2 methanation through utilizing MOFs-derived support.

Toward a Comprehensive Understanding of Amorphous Photocatalysts: Fundamental Hypotheses and Applications in CO2 Photoreduction

In principle, photocatalytic activity can be precisely controlled with crystalline catalysts. However, an amorphous photocatalyst could be a viable candidate for CO₂ photoreduction to form value-added products. The amorphous phase is currently part of the crystalline material in several ongoing CO₂ photoreduction studies. Additionally, no study indicates the amorphous material required for overall CO₂ photoreduction. This perspective review article highlights fundamental assumptions that are necessary to gain insights and understand the effectiveness of amorphous photocatalysts for CO₂ photoreduction. We start with basic ideas and theories about these materials, including light harvesting, variable coordination number, and the interaction of CO₂ molecules with the amorphous catalytic surface. To understand the prospects of the amorphous photocatalyst, we explore machine learning with EXAFS. Furthermore, we discuss product selectivity and regeneration of photocatalysts in detail. Finally, we briefly review the work in progress on amorphous materials and compare it to that on crystalline ones.

Process coupling of CO2 reduction and 5-HMF oxidation mediated by defect-enriched layered double hydroxides

Aiming at the comprehensive utilization of waste carbon resources and renewable carbon resources, we put forward the photocatalytic coupling process of CO₂ reduction and 5-hydroxymethylfurfural (5-HMF) oxidation mediated by the anionic compound of layered double hydroxides (LDHs). Specifically, a ZnNiFe-LDH was synthesized by co-precipitation method, during which CO₂ was stored between LDH layers in the form of carbonate. Then, a certain amount of metal vacancies were introduced into LDH nanosheets by selectively etching Zn²⁺ ions. ICP-AES, EPR and XPS showed that the concentration of Zn vacancies gradually increased with the etching time prolonging, which thus optimized the electronic structure of LDH layers. Under the catalysis of the electron-rich metal cations and hydroxyl groups on the layers, the interlayer carbonate was in situ reduced into CO coupled accompanied with the 5-HMF oxidation to 2.5-furandiformaldehyde (DFF). Compared with the unetched ZnNiFe-LDHs, the CO and DFF yields over the LDHs etched for 3 h were increased by 2.84 and 2.82 times under UV-vis irradiation with a density of 500 mW cm^-2. Finally, combined with isotope-labeled ¹³CO₂ experiments and in situ FTIR characterization, we revealed the possible coupling mechanism and defect-induced performance enhancement mechanism.

Phosphorus Tailors the d-Band Center of Copper Atomic Sites for Efficient CO2 Photoreduction under Visible-Light Irradiation

Photoreduction of CO₂ into solar fuels has received great interest, but suffers from low catalytic efficiency and poor selectivity. Herein, two single-Cu-atom catalysts with unique Cu configurations in phosphorus-doped carbon nitride (PCN), namely, Cu₁ N₃ @PCN and Cu₁ P₃ @PCN were fabricated via selective phosphidation, and tested in visible light-driven CO₂ reduction by H₂ O without sacrificial agents. Cu₁ N₃ @PCN was exclusively active for CO production with a rate of 49.8 μmol_CO  g_cat ^-1  h^-1 , outperforming most polymeric carbon nitride (C₃ N₄ ) based catalysts, while Cu₁ P₃ @PCN preferably yielded H₂ . Experimental and theoretical analysis suggested that doping P in C₃ N₄ by replacing a corner C atom upshifted the d-band center of Cu in Cu₁ N₃ @PCN close to the Fermi level, which boosted the adsorption and activation of CO₂ on Cu₁ N₃ , making Cu₁ N₃ @PCN efficiently convert CO₂ to CO. In contrast, Cu₁ P₃ @PCN with a much lower Cu 3d electron energy exhibited negligible CO₂ adsorption, thereby preferring H₂ formation via photocatalytic H₂ O splitting.

Photodriven CO2 Hydrogenation into Diverse Products: Recent Progress and Perspective

Converting CO2 into value-added chemicals through hydrogenation can optimize the energy structure dominated by fossil energy, effectively alleviate environmental problems, and achieve full utilization of carbon resources. However, the traditional CO2 hydrogenation reactions need to be carried out under high temperature and pressure, causing inevitable secondary pollution to the environment. A fundamental way to solve these problems is to use clean solar energy to convert CO2 into value-added chemicals and to establish an artificial carbon cycle process. In this Perspective, we highlight recent advances in photodriven CO2 conversion, including the reverse water-gas-shift reaction, methanation reaction, methanol synthesis reaction, and C2+ hydrocarbon synthesis reaction. Finally, we also discuss the challenges and future investigation opportunities for modulating the selective conversion of CO2. This Perspective offers guidance for the design of photodriven CO2 conversion or even the entire C1 catalyst chemistry for tuning product selectivity and activity.

Thermo-photo catalysis: a whole greater than the sum of its parts

Thermo-photo catalysis, which is the catalysis with the participation of both thermal and photo energies, not only reduces the large energy consumption of thermal catalysis but also addresses the low efficiency of photocatalysis. As a whole greater than the sum of its parts, thermo-photo catalysis has been proven as an effective and promising technology to drive chemical reactions. In this review, we first clarify the definition (beyond photo-thermal catalysis and plasmonic catalysis), classification, and principles of thermo-photo catalysis and then reveal its superiority over individual thermal catalysis and photocatalysis. After elucidating the design principles and strategies toward highly efficient thermo-photo catalytic systems, an ample discussion on the synergetic effects of thermal and photo energies is provided from two perspectives, namely, the promotion of photocatalysis by thermal energy and the promotion of thermal catalysis by photo energy. Subsequently, state-of-the-art techniques applied to explore thermo-photo catalytic mechanisms are reviewed, followed by a summary on the broad applications of thermo-photo catalysis and its energy management toward industrialization. In the end, current challenges and potential research directions related to thermo-photo catalysis are outlined.