Efficient (>20 %) and Stable All-Inorganic Cesium Lead Triiodide Solar Cell Enabled by Thiocyanate Molten Salts

Ambient Air Processed Inverted Inorganic Perovskite Solar Cells with over 21 % Efficiency Enabled by Multifunctional Ethacridine Lactate

All-inorganic cesium lead triiodide perovskites (CsPbI3) have attracted increasing attention due to their good thermal stability, remarkable optoelectronic properties, and adaptability in tandem solar cells. However, N2-filled glovebox is generally required to strictly control the humidity during film fabrication due to the moisture-induced black-to-yellow phase transition, which remains a great hinderance for further commercialization. Herein, we report an effective approach via incorporating multifunctional ethacridine lactate (EAL) to mitigate moisture invasion and enable the fabrication of efficient inverted (p-i-n) CsPbI3 perovskite solar cells (PSCs) under ambient condition. It is revealed that the lactate anions accelerate the crystallization of CsPbI3, shortening the exposure time to moisture during film fabrication. Meanwhile, the conjugated backbone and multiple functional groups in the ethacridine cations can interact with I- and Pb2+ to reduce the undesired defects, stabilize the perovskite structure and facilitate the charge transport in the film. Moreover, EAL incorporation also leads to better energy alignment, thus favoring charge extraction at both upper and bottom interfaces. Consequently, the device efficiency and stability are enormously enhanced, with the champion efficiency reaching 21.08 %. This even surpasses the highest value reported for the devices fabricated in glovebox, representing a record efficiency of inverted all-inorganic PSCs.

Improving FAPbBr3 Perovskite Crystal Quality via Additive Engineering for High Voltage Solar Cell over 1.5 V

Lead bromide-based perovskites are promising materials as the top cells of tandem solar cells and for application in various fields requiring high voltages owing to their wide band gaps and excellent environmental resistances. However, several factors, such as the formation of bulk and surface defects, impede the performances of corresponding devices, thereby limiting the efficiencies of these devices as single-junction devices. To reduce the number of defect sites, urea is added to the formamidinium lead bromide (FAPbBr3) perovskite material to increase its grain size. Nevertheless, urea undesirably reacts with lead(II) bromide (PbBr2) in the perovskite structure, creating unfavorable impurities in the device. To solve this problem, herein, in addition to urea, we introduced formamidinium chloride (FACl) into FAPbBr3. Owing to the synergistic effect of urea and FACl, the FAPbBr3 film quality effectively improved due to suppression of the generation of impurities and stabilization of film crystallinity. Consequently, the FAPbBr3 single-junction solar cell constructed using FACl and urea as additives demonstrated a power conversion efficiency of 9.6% and an open-circuit voltage of 1.516 V with negligible hysteresis. This study provides new insights into the use of additive engineering for overcoming the energy losses caused by defects in perovskite films.

The effective prolongation of the excited-state carrier lifetime of CsPbI2Br with applying strain

In recent years, all-inorganic perovskites CsPbX3 (X = Cl, Br, I) have emerged as excellent candidates for solar cells due to their remarkable thermal stability and suitable bandgaps. Among them, CsPbI2Br is a hotspot in perovskite material research currently. Non-radiative electron-hole recombination often leads to significant energy losses, impacting the efficiency of solar cells, so a thorough understanding of carrier recombination mechanisms is crucial. Our work investigated the carrier recombination dynamics in detail and proved that strains can effectively reduce nonradiative recombination. In this study, using first-principles calculations combined with nonadiabatic (NA) molecular dynamics (MD), we demonstrate that applying 2% tensile and 2% compressive strains to CsPbI2Br can modify the bandgap, induce moderate disorder, reduce the overlap of electron-hole wavefunctions, decrease NA coupling, and shorten decoherence time, thereby minimizing non-radiative recombination and extending the carrier lifetime. Especially the 2% tensile strain exhibits more effective control performance, significantly reducing non-radiative electron-hole recombination and extending the charge carrier lifetime to 14.59 ns, nearly five times that of the pristine CsPbI2Br system (3.12 ns). This study reveals the impact mechanism of strain on carrier behavior in perovskite solar cells, providing a new non-chemical strategy for modulating the lifetime of photo-generated carriers and enhancing the efficiency of all-inorganic perovskite solar cells.

All-Inorganic Perovskite Solar Cells: Defect Regulation and Emerging Applications in Extreme Environments

All-inorganic perovskite solar cells (PSCs), such as CsPbX3, have garnered considerable attention recently, as they exhibit superior thermodynamic and optoelectronic stabilities compared to the organic-inorganic hybrid PSCs. However, the power conversion efficiency (PCE) of CsPbX3 PSCs is generally lower than that of organic-inorganic hybrid PSCs, as they contain higher defect densities at the interface and within the perovskite light-absorbing layers, resulting in higher non-radiative recombination and voltage loss. Consequently, defect regulation has been adopted as an important strategy to improve device performance and stability. This review aims to comprehensively summarize recent progresses on the defect regulation in CsPbX3 PSCs, as well as their cutting-edge applications in extreme scenarios. The underlying fundamental mechanisms leading to the defect formation in the crystal structure of CsPbX3 PSCs are firstly discussed, and an overview of literature-adopted defect regulation strategies in the context of interface, internal, and surface engineering is provided. Cutting-edge applications of CsPbX3 PSCs in extreme environments such as outer space and underwater situations are highlighted. Finally, a summary and outlook are presented on future directions for achieving higher efficiencies and superior stability in CsPbX3 PSCs.

Unveiling the Potential of Ambient Air Annealing for Highly Efficient Inorganic CsPbI3 Perovskite Solar Cells

Here, we report a detailed surface analysis of dry- and ambient air-annealed CsPbI3 films and their subsequent modified interfaces in perovskite solar cells. We revealed that annealing in ambient air does not adversely affect the optoelectronic properties of the semiconducting film; instead, ambient air-annealed samples undergo a surface modification, causing an enhancement of band bending, as determined by hard X-ray photoelectron spectroscopy measurements. We observe interface charge carrier dynamics changes, improving the charge carrier extraction in CsPbI3 perovskite solar cells. Optical spectroscopic measurements show that trap state density is decreased due to ambient air annealing. As a result, air-annealed CsPbI3-based n-i-p structure devices achieved a 19.8% power conversion efficiency with a 1.23 V open circuit voltage.

Defect Compensation and Lattice Stabilization Enables High Voltage Output in Tin Halide Perovskite Solar Cells

Tin halide perovskite solar cells (PSCs) are regarded as the most promising lead-free alternatives for photovoltaic applications. However, they still suffer from uncompetitive photovoltaic performance because of the facile Sn2+ oxidation and Sn-related defects. Herein, a defect and carrier management strategy by using diaminopyridine (DP) and 4-bromo-2,6-diaminopyridine (4BrDP) as multifunctional additives for tin halide perovskites is reported. Both DP and 4BrDP induced strong interaction with tin perovskites by coordinate bonding and N─H···I hydrogen bonding, which greatly suppresses the micro-strain and Urbach energy of tin halide perovskite films. The strong hydrogen bonding inhibits the formation of I3 - and related defect density. Meanwhile, the electron-donor species of halogen bond in 4BrDP provides higher reactivity of 2 and 6 sites, which indicates stronger passivation ability with tin halide perovskites. These advances enable a champion power conversion efficiency (PCE) of 13.40% in 4BrDP-processed devices with remarkable improvement in both open-circuit voltage (Voc ) of 881 mV and fill factor (FF) of 71.26%. The 4BrDP devices retain 91% and 82% of the pristine PCE after 2000 h storage in N2 atmosphere and 1000 h under 85 °C, respectively. Therefore, this work provides new insight into molecular design for high-performance and stable lead-free optoelectronics.

Interface Engineering with Formamidinium Salts for Improving Ambient-Processed Inverted CsPbI3 Photovoltaic Performance: Intermediate- vs Post-Treatment

Inverted all-inorganic perovskite solar cells (PSCs) have attracted increasing attention owing to excellent thermal stability, easy fabrication, and adaptable application as top cell in tandem solar cells. Apart from efficiency, ambient processing is desirable for practical production. To avoid water invasion in ambient air, surface engineering for perovskites is reported as a valid approach. However, most were performed by post-treatment, which hardly regulates the formation process of perovskite crystals. This work demonstrates a simple but effective surface intermediate-treatment strategy to stabilize CsPbI3 perovskites fabricated in ambient air and compares the different effects yielded on the inverted PSCs. By using formamidinium (FA) salts for intermediate-treatment, the strong interaction between FA cation and [PbI6]4- octahedron improves the moisture resistance, and compared with the post-treatment strategy, the accelerated crystallization rate and the shortened exposure time to moisture reduce the devastation by water during film fabrication process further. Moreover, the greatly passivated defects and optimized energy level matching between perovskite and PCBM suppress the nonradiative recombination. Resultantly, the optimized device shows enhanced efficiency from 11.39% to 15.45%, and long-term stability is improved, with 97.6% efficiency remaining after storage for 1600 h. Therefore, we believe that this work can provide a promising guideline for fabricating all-inorganic inverted PSCs in a low-cost manufacturing scheme.

Controllable Black-to-Yellow Phase Transition by Tuning the Lattice Symmetry in Perovskite Quantum Dots

The black-to-yellow phase transition in perovskite quantum dots (QDs) is more complex than in bulk perovskites, regarding the role of surface energy. Here, with the assistance of in situ grazing-incidence wide-angle and small-angle X-ray scattering (GIWAXS/GISAXS), distinct phase behaviors of cesium lead iodide (CsPbI3 ) QD films under two different temperature profiles-instant heating-up (IHU) and slow heating-up (SHU) is investigated. The IHU process can cause the phase transition from black phase to yellow phase, while under the SHU process, the majority remains in black phase. Detailed studies and structural refinement analysis reveal that the phase transition is triggered by the removal of surface ligands, which switches the energy landscape. The lattice symmetry determines the transition rate and the coexistence black-to-yellow phase ratio. The SHU process allows longer relaxation time for a more ordered QD packing, which helps sustain the lattice symmetry and stabilizes the black phase. Therefore, one can use the lattice symmetry as a general index to monitor the CsPbI3 QD phase transition and finetune the coexistence black-to-yellow phase ratio for niche applications.

Interface Modification for Energy Level Alignment and Charge Extraction in CsPbI3 Perovskite Solar Cells

In perovskite solar cells (PSCs) energy level alignment and charge extraction at the interfaces are the essential factors directly affecting the device performance. In this work, we present a modified interface between all-inorganic CsPbI3 perovskite and its hole-selective contact (spiro-OMeTAD), realized by the dipole molecule trioctylphosphine oxide (TOPO), to align the energy levels. On a passivated perovskite film, with n-octylammonium iodide (OAI), we created an upward surface band-bending at the interface by TOPO treatment. This improved interface by the dipole molecule induces a better energy level alignment and enhances the charge extraction of holes from the perovskite layer to the hole transport material. Consequently, a Voc of 1.2 V and a high-power conversion efficiency (PCE) of over 19% were achieved for inorganic CsPbI3 perovskite solar cells. Further, to demonstrate the effect of the TOPO dipole molecule, we present a layer-by-layer charge extraction study by a transient surface photovoltage (trSPV) technique accomplished by a charge transport simulation.

Retarding solid-state reactions enable efficient and stable all-inorganic perovskite solar cells and modules

All-inorganic CsPbI₃ perovskite solar cells (PSCs) with efficiencies exceeding 20% are ideal candidates for application in large-scale tandem solar cells. However, there are still two major obstacles hindering their scale-up: (i) the inhomogeneous solid-state synthesis process and (ii) the inferior stability of the photoactive CsPbI₃ black phase. Here, we have used a thermally stable ionic liquid, bis(triphenylphosphine)iminium bis(trifluoromethylsulfonyl)imide ([PPN][TFSI]), to retard the high-temperature solid-state reaction between Cs₄PbI₆ and DMAPbI₃ [dimethylammonium (DMA)], which enables the preparation of high-quality and large-area CsPbI₃ films in the air. Because of the strong Pb-O contacts, [PPN][TFSI] increases the formation energy of superficial vacancies and prevents the undesired phase degradation of CsPbI₃. The resulting PSCs attained a power conversion efficiency (PCE) of 20.64% (certified 19.69%) with long-term operational stability over 1000 hours. A record efficiency of 16.89% for an all-inorganic perovskite solar module was achieved, with an active area of 28.17 cm².

Synchronous Modulation of Energy Level Gradient and Defects for High-Efficiency HTL-Free Carbon-Based All-Inorganic Perovskite Solar Cells

In order to improve the thermal stability of perovskite solar cells (PSCs) and reduce production costs, hole transport layer (HTL)-free carbon-based CsPbI₃ PSCs (C-PSCs) have attracted the attention of researchers. However, the power conversion efficiency (PCE) of HTL-free CsPbI₃ C-PSCs is still lower than that of PSCs with HTL/ metal electrodes. This is because the direct contact between the carbon electrode and the perovskite layer has a higher requirement on the crystal quality of perovskite layer and matched energy level at perovskite/carbon interface. Herein, the acyl chloride group and its derivative trichloroacetyl chloride are used to passivate CsPbI₃ C-PSCs for the first time. The results show that the carbonyl group of trichloroacetyl chloride can effectively passivate the uncoordinated Pb²⁺ ions in perovskite. At the same time, leaving group Cl^- ions can increase the grain size of perovskite and improve the crystallization quality of perovskite layer. In addition, the trichloroacetyl chloride tends to generate cesium chloride acetate, which acts as an electron blocking layer, reduces charge recombination, promotes gradient energy level arrangement, and effectively improves the separation and extraction ability of carriers. The PCE of CsPbI₃ HTL-free C-PSCs is successfully increased from 13.40% to 14.82%.

Facile Dimension Transformation Strategy for Fabrication of Efficient and Stable CsPbI3 Perovskite Solar Cells

All-inorganic cesium lead triiodide (CsPbI₃) perovskite has received increasing attention due to its intrinsic thermal stability and suitable band gap for photovoltaic applications. However, it is difficult to deposit high-quality pure-phase CsPbI₃ films using CsI and PbI₂ as precursors due to the rapid nucleation and crystal growth by the solution coating method. Here, a simple cation-exchange approach is employed to fabricate all-inorganic 3D CsPbI₃ perovskite, where 1D ethylammonium lead (EAPbI₃) perovskite is first solution-deposited and then transformed to 3D CsPbI₃ via ion exchange between EA⁺ and Cs⁺ during thermal annealing. The large space between the PbI₃^- skeletons in 1D EAPbI₃ favors the cation interdiffusion and exchange for the formation of pure-phase 3D CsPbI₃ with full compactness and high crystallinity and orientation. The resulting CsPbI₃ film exhibits a low trap density of state and high charge mobility, and the perovskite solar cell shows a power-conversion efficiency of 18.2% with enhanced stability. This strategy provides an alternative and promising fabrication route for the fabrication of high-quality all-inorganic perovskite devices.

Dopant-Free Polymer Hole Transport Materials for Highly Stable and Efficient CsPbI3 Perovskite Solar Cells

All-inorganic perovskite CsPbI₃ contains no volatile organic components and is a thermally stable photoactive material for wide-bandgap perovskite solar cells (PSCs); however, CsPbI₃ readily undergoes undesirable phase transitions due to the hygroscopic nature of the ionic dopants used in commonly used hole transport materials. In the current study, the popular donor material PM6 in organic solar cells is used as a hole transport layer (HTL). The benzodithiophene-based backbone-conjugated polymer requires no dopant and leads to a higher power conversion efficiency (PCE) than 2,2',7,7'-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9'-spirobifluorene (Spiro-OMeTAD). Moreover, PM6 also shows priorities in hole mobility, hydrophobicity, cascade energy level alignment, and even defect passivation of perovskite films. With PM6 as the dopant-free HTL, the PSCs achieve a champion PCE of 18.27% with a competitive fill factor of 82.8%. Notably, the present PCE is based on the dopant-free HTL in CsPbI₃ PSCs reported thus far. The PSCs with PM6 as the HTL retain over 90% of the initial PCE stored in a glovebox filled with N₂ for 3000 h. In contrast, the PSCs with Spiro-OMeTAD as the HTL maintain ≈80% of the initial PCE under the same conditions.

Manipulating the Formation of 2D/3D Heterostructure in Stable High-Performance Printable CsPbI3 Perovskite Solar Cells

Manipulating the formation process of the 2D/3D perovskite heterostructure, including its nucleation/growth dynamics and phase transition pathway, plays a critical role in controlling the charge transport between 2D and 3D crystals, and consequently, the scalable fabrication of efficient and stable perovskite solar cells. Herein, the structural evolution and phase transition pathways of the ligand-dependent 2D perovskite atop the 3D surface are revealed using time-resolved X-ray scattering. The results show that the ligand size and shape have a critical influence on the final 2D structure. In particular, ligands with smaller sizes and more reactive sites tend to form the n = 1 phase. Increasing the ligand size and decreasing the reactive sites promote the transformation from 3D to n = 3 and n < 3 phases. These findings are useful for the rational design of the phase distribution in 2D perovskites to balance the charge transport and stability of the perovskite films. Finally, solar cells based on ambient-printed CsPbI₃ with n-butylammonium iodide treatment achieve an improved efficiency of 20.33%, which is the highest reported value for printed inorganic perovskite solar cells.

Pushing the Limit of Open-Circuit Voltage Deficit via Modifying Buried Interface in CsPbI3 Perovskite Solar Cells

Although CsPbI₃ perovskites have shown tremendous potential in the photovoltaic field owing to their excellent thermal stability, the device performance is seriously restricted by severe photovoltage loss. The buried titanium oxide/perovskite interface plays a critical role in interfacial charge transport and perovskite crystallization, which is closely related to open-circuit voltage deficit stemming from nonradiative recombination. Herein, target molecules named 3-sulphonatopropyl acrylate potassium salts are deliberately employed with special functional groups for modifying the buried interface, giving rise to favorable functions in terms of passivating interfacial defects, optimizing energetic alignment, and facilitating perovskite crystallization. Experimental characterizations and theoretical calculations reveal that the buried interface modification inhibits the electron transfer barrier and simultaneously improves perovskite crystal quality, thereby reducing trap-assisted charge recombination and interfacial energetic loss. Consequently, the omnibearing modification regarding the buried interface endows the devices with an impressive efficiency of 20.98%, achieving a record-low V_OC deficit of 0.451 V. The as-proposed buried interface modification strategy renders with a universal prescription to push the limit of V_OC deficit, showing a promising future in developing high-performance all-inorganic perovskite photovoltaics.

Simultaneous Lattice Engineering and Defect Control via Cadmium Incorporation for High-Performance Inorganic Perovskite Solar Cells

Doping of all-inorganic lead halide perovskites to enhance their photovoltaic performance and stability has been reported to be effective. Up to now most studies have focused on the doping of elements in to the perovskite lattice. However, most of them cannot be doped into the perovskite lattice and the roles of these dopants are still controversial. Herein,the authors introduce CdI₂ as an additive into CsPbI_3-x Br_x and use it as active layer to fabricate high-performance inorganic perovskite solar cells (PSCs). Cd with a smaller radius than Pb can partially substitute Pb in the perovskite lattice by up to 2 mol%. Meanwhile, the remaining Cd stays on the surface and grain boundaries (GB) of the perovskite film in the form of Cs₂ CdI_4-x Br_-x , which is found to reduce non-radiative recombination. These effects result in prolonged charge carrier lifetime, suppressed defect formation, decreased GBs, and an upward shift of energybands in the Cd-containing film. A champion efficiency of 20.8% is achieved for Cd-incorporated PSCs, together with improved device ambient stability. This work highlights the importance of simultaneous lattice engineering, defectcontrol and atomic-level characterization in achieving high-performance inorganic PSCs with well-defined structure-property relationships.

Improving the potential of ethyl acetate green anti-solvent to fabricate efficient and stable perovskite solar cells

Until now, in all state-of-the-art efficient perovskite solar cells (PSCs), during the fabrication process of the perovskite layer, highly toxic anti-solvents such as toluene, chlorobenzene, and diethyl ether have been used. This is highly concerning and urgently needs to be considered by laboratories and institutes to protect the health of researchers and employees working towards safe PSC fabrication. Green anti-solvents are usually used along with low-performance PSCs. The current study solves the ineptitude of the typical ethyl acetate green anti-solvent by adding a potassium thiocyanate (KSCN) material to it. The KSCN additive causes delay in the perovskite growing process. It guarantees the formation of larger perovskite domains during fabrication. The enlarged perovskite domains reduce the bulk and surface trap density in the perovskite. It enables lower trap-facilitated charge recombination along with efficient charge extraction in PSCs. Overall, the developed method results in a champion performance of 17.12% for PSCs, higher than the 13.78% recorded for control PSCs. The enlarged perovskite domains warrant lower humidity interaction paths with the perovskite composition, indicating higher stability in PSCs.

Thiourea-Assisted Facile Fabrication of High-Quality CsPbBr3 Perovskite Films for High-Performance Solar Cells

Inorganic CsPbBr₃ perovskite solar cells have attracted widespread attention recently because of their decent efficiency and good ambient stability. Nevertheless, the fabrication of high-quality CsPbBr₃ perovskite via the conventional solution-processing strategy still faces great challenges because the solubility of CsBr in the conventional solvent is poor. Here, we develop a facile thiourea-assisted two-step spin-coating process to fabricate a CsPbBr₃ perovskite film with high phase purity and crystallinity and enlarged crystal grains. Thiourea is introduced into the PbBr₂ layer during the first-step spin-coating process, which promotes the wettability of the PbBr₂ layer and produces the space for growing large perovskite grains. The green high-concentration CsBr/H₂O solution is adopted at the second-step spin-coating process, enabling enough CsBr to be deposited by a facile one-step process. By optimizing the content of thiourea, a compact CsPbBr₃ perovskite film with a smooth surface, large grains, and high phase purity and crystallinity is formed. Consequently, the fabricated perovskite solar cell with the architecture of FTO/TiO₂/CsPbBr₃ film/carbon exhibits a superior performance with a high efficiency of 9.11%. In addition, the unencapsulated device preserves over 90% of its initial efficiency after storage at ambient conditions for 45 days.

A Versatile Molten-Salt Induction Strategy to Achieve Efficient CsPbI3 Perovskite Solar Cells with a High Open-Circuit Voltage >1.2 V

All-inorganic CsPbI₃ perovskite has emerged as an important photovoltaic material due to its high thermal stability and suitable bandgap for tandem devices. Currently, the cell performance of CsPbI₃ solar cells is mainly subject to a large open-circuit voltage (V_OC ) deficit. Herein, a multifunctional room-temperature molten salt, dimethylamine acetate (DMAAc) is demonstrated, which not only directly acts as a solvent for precursor solutions, but also regulates the phase conversion process of the CsPbI₃ film for high-efficiency photovoltaics. DMAAc can stabilize the DMAPbI₃ structure and eliminate the Cs₄ PbI₆ intermediate phase, which is easily spatially segregated. Meanwhile, a new homogeneous intermediate phase DMAPb(I,Ac)₃ is formed, which finally affords high-quality CsPbI₃ films. With this approach, the charge capture activity of defects in the CsPbI₃ film is significantly suppressed. Consequently, a V_OC of 1.25 V and >21% power conversion efficiency are achieved, which is the record highest reported thus far. This intermediate phase-regulation strategy is believed to be applicable to other perovskite material systems.

Role of Moisture and Oxygen in Defect Management and Orderly Oxidation Boosting Carbon-Based CsPbI2 Br Solar Cells to a New Record Efficiency

Large energy loss (E_loss ) caused by defect-assisted recombination makes the photovoltaic performance of carbon-based perovskite solar cells (C-PSCs) inferior to that of metal-electrode ones. Herein, the influence of environmental factors (moisture and oxygen) on defect management during re-annealing process of CsPbI₂ Br crystalline films is systematically studied. Density functional theory and experimental results indicate that moisture in the air can significantly reduce the oxidation kinetics of crystalline films, resulting in orderly oxidation. Concomitantly, the oxidation decomposition products PbO and CsPbIBr₂ are enriched at grain boundaries, passivating surface defects efficiently. Simultaneously, energy band coupling between CsPbI₂ Br and CsPbIBr₂ improves the hole extraction efficiency. The photovoltage of corresponding C-PSCs is increased from 1.05 to 1.32 V, indicating a reduced E_loss derived from orderly oxidation strategy. Correspondingly, the champion cell achieves an efficiency of 15.27%, and a certified efficiency of 14.7%, which is a new record efficiency for CsPbI₂ Br C-PSCs.

Synchronous Surface Reconstruction and Defect Passivation for High-Performance Inorganic Perovskite Solar Cells

The nonradiative charge recombination caused by surface defects and inferior crystalline quality are major roadblocks to further enhancing the performance of CsPbI_{3- x} Br_x perovskite solar cells (PSCs). Theoretical calculations indicate that sodium diethyldithiocarbamate (NaDDTC), a popular bacteriostatic benign material, can initiate multiple interactions with the CsPbI_{3- x} Br_x perovskite surface to effectively passivate the defects. The experimental results reveal that the NaDDTC can indeed passivate the electron trap states and lock active sites for charge traps and water adsorption. In addition, it is found that a solid-state reaction is triggered for perovskite crystal regrowth by the NaDDTC post-treatment, which not only enlarges grain size for reducing the density of grain boundary defects but also compensates some surface defects induced by the primary film growth. Consequently, the power conversion efficiency (PCE) of the CsPbI_{3- x} Br_x PSC is increased to as high as 20.40%, with significant improvement in fill factor and open-circuit voltage (V_OC ), making it one of the highest for this type of solar cell. Furthermore, the optimized devices exhibit better environmental stability. Overall, this robust synchronous strategy provides efficient surface reconstruction and defect passivation for achieving both high PCE and stable inorganic perovskite.

High-conductivity thiocyanate ionic liquid interface engineering for efficient and stable perovskite solar cells

A high-conductivity thiocyanate ionic liquid (EMIMSCN) was introduced into perovskite solar cells for the first time. The high conductivity of EMIMSCN ensures an adequate supply of free SCN^- anions and EMIM⁺ cations, so as to multifunctionally passivate the I vacancy and Pb-I antisite defects and realize an optimized interfacial energy level. Consequently, the devices with EMIMSCN treatment achieve a high PCE of 22.55% with substantial enhancement in stability. This simple and efficient strategy provides new insights into the selection of passivation agents for efficient and stable PSCs.

Tailoring Defects Regulation in Air-Fabricated CsPbI3 for Efficient Inverted All-Inorganic Perovskite Solar Cells with Voc of 1.225 V

Air fabrication of CsPbI₃ perovskite photovoltaics has been attractive and fast-moving owing to its compatibility to low-cost and up-scalable fabrication. However, due to the inevitable erosions, undesirable traps are formed in air-fabricated CsPbI₃ crystals and seriously hinder photovoltaic performance with poor reproduction. Here, 3, 5-difluorobenzoic acid hydrazide (FBJ) is incorporated as trap regulation against external erosions in air-fabricated CsPbI₃. Theoretical simulations reveal that FBJ molecules feature stronger absorbance on CsPbI₃ than water, which can regulate trap formations for water erosions. In addition, FBJ with solid bonding interaction to CsPbI₃ can enlarge formation energy of various defects during crystallization and further suppress traps. Moreover, profiling to reductive hydrazine groups, FBJ inhibits traps for oxidation erosions. Consequently, a champion efficiency of 19.27% with an impressive V_oc of 1.225 V is realized with the inverted CsPbI₃ devices. Moreover, the optimized devices present superior stability and contain 97.4% after operating at 60 °C for 600 h.

Vacuum-Assisted Thermal Annealing of CsPbI3 for Highly Stable and Efficient Inorganic Perovskite Solar Cells

Inorganic cesium lead iodide perovskite CsPbI₃ is attracting great attention as a light absorber for single or multi-junction photovoltaics due to its outstanding thermal stability and proper band gap. However, the device performance of CsPbI₃ -based perovskite solar cells (PSCs) is limited by the unsatisfactory crystal quality and thus severe non-radiative recombination. Here, vacuum-assisted thermal annealing (VATA) is demonstrated as an effective approach for controlling the morphology and crystallinity of the CsPbI₃ perovskite films formed from the precursors of PbI₂ , CsI, and dimethylammonium iodide (DMAI). By this method, a large-area and high-quality CsPbI₃ film is obtained, exhibiting a much reduced trap-state density with prolonged charge lifetime. Consequently, the solar cell efficiency is raised from 17.26 to 20.06 %, along with enhanced stability. The VATA would be an effective approach for fabricating high-performance thin-film CsPbI₃ perovskite optoelectronics.

Temperature-Reliable Low-Dimensional Perovskites Passivated Black-Phase CsPbI3 toward Stable and Efficient Photovoltaics

Low-dimensional (LD) perovskites can effectively passivate and stabilize 3D perovskites for high-performance perovskite solar cells (PSCs). Regards CsPbI₃ -based PSCs, the influence of high-temperature annealing on the LD perovskite passivation effect has to be taken into account due to fact the black-phase CsPbI₃ crystallization requires high-temperature treatment, however, which has been rarely concerned so far. Here, the thermal stability of LD perovskites based on three hydrophobic organic ammonium salts and their passivation effect toward CsPbI₃ and the whole device performance, have been investigated. It is found that, phenyltrimethylammonium iodide (PTAI) and its corresponding LD perovskites exhibit excellent thermal stability. Further investigation reveals that PTAI-based LD perovskites are mainly distributed at grain boundaries, which not only enhances the phase stability of CsPbI₃ but also effectively suppresses non-radiative recombination. As a consequence, the champion PSC device based on CsPbI₃ exhibits a record efficiency of 21.0 % with high stability.

All-Inorganic Perovskite Single Crystals for Optoelectronic Detection

Due to their many varieties of excellent optoelectric properties, perovskites have attracted large numbers of researchers in the past few years. For the hybrid perovskites, a long diffusion length, long carrier lifetime, and high μτ product are particularly noticeable. However, some disadvantages, including high toxicity and instability, restrict their further large-scale application. By contrast, all-inorganic perovskites not only have remarkable optoelectric properties but also feature high structure stability due to the lack of organic compositions. Benefiting from these, all-inorganic perovskites have been extensively explored and studied. Compared with the thin film type, all-inorganic perovskite single crystals (PSCs) with fewer grain boundaries and crystalline defects have better optoelectric properties. Nevertheless, it is important to note that only a few reports to date have presented a summary of all-inorganic PSCs. In this review, we firstly make a summary and propose a classification method according to the crystal structure. Then, based on the structure classification, we introduce several representative materials and focus on their corresponding growth methods. Finally, applications for detectors of all-inorganic PSCs are listed and summarized. At the end of the review, based on the current research situation and trends, some perspectives and advice are proposed.

Unveiling the roles of halogen ions in the surface passivation of CsPbI3 perovskite solar cells

Halide ion passivation is an effective way to improve the stability and the power conversion efficiency (PCE) of perovskite solar cells. In this work, the passivation mechanism of the surface iodine vacancies of inorganic perovskite CsPbI₃ films by halogen ions (F^-, Cl^-, and Br^-) has been studied using the first-principles method. Due to its high electronegativity, the F ion withdraws electron density out of its neighboring atoms, readily forms ionic bonds with Pb atoms and has a coupling effect with the nearest neighbor Cs atoms, which can alleviate the generation of cation vacancy and ion migration to locally stabilize the structure of the perovskite. The fluorinated CsPbI₃ (001) surface has a lower surface energy, which improves the grain growth of perovskite films. Different from F^-, the passivation via Cl^- or Br^- ions can effectively prevent the charge accumulation on the film surface, reduce the exciton binding energy of CsPbI₃, and eliminate the loss of optical absorption intensity in the visible light range caused by iodine vacancies. These results provide a deep understanding about surface passivation by halogen ions for perovskite solar cells.

Intermediate-Phase-Modified Crystallization for Stable and Efficient CsPbI3 Perovskite Solar Cells

All-inorganic CsPbI₃ perovskite solar cells (PSCs) are becoming desirable for their excellent photovoltaic ability and adjustable crystal structure distortion. However, the unsatisfactory crystallization of the perovskite phase is unavoidable and leads to challenges on the road to the development of high-quality CsPbI₃ perovskite films. Here, we reported the intermediate-phase-modified crystallization (IPMC) method, which introduces pyrrolidine hydroiodide (PI) before the formation of the perovskite phase. The hydrogen bonding, which originates from the interaction between the -NH in PI and the dimethylammonium iodide (DMAI) from the precursor solution, improved the crystallization conditions and further prompted the transition from the DMAPbI₃ phase to CsPbI₃ perovskite phase. The application of the IPMC method not only decreased the trap density but also changed the energy alignment for better separation of electron-hole pairs. As a result, the devices based on the PI-CsPbI₃ perovskite films reached an efficiency of 18.72% and maintained 85% of their initial PCE after 1000 h of being stored in an ambient environment (∼25% RH, 25 °C). This work stimulates inspiration on how to conveniently fabricate high-quality perovskite films in industry.

Quantifying Efficiency Limitations in All-Inorganic Halide Perovskite Solar Cells

While halide perovskites have excellent optoelectronic properties, their poor stability is a major obstacle toward commercialization. There is a strong interest to move away from organic A-site cations such as methylammonium and formamidinium toward Cs with the aim of improving thermal stability of the perovskite layers. While the optoelectronic properties and the device performance of Cs-based all-inorganic lead-halide perovskites are very good, they are still trailing behind those of perovskites that use organic cations. Here, the state-of-the-art of all-inorganic perovskites for photovoltaic applications is reviewed by performing detailed meta-analyses of key performance parameters on the cell and material level. Key material properties such as carrier mobilities, external photoluminescence quantum efficiency, and photoluminescence lifetime are discussed and what is known about defect tolerance in all-inorganic is compared relative to hybrid (organic-inorganic) perovskites. Subsequently, a unified approach is adopted for analyzing performance losses in perovskite solar cells based on breaking down the losses into several figures of merit representing recombination losses, resistive losses, and optical losses. Based on this detailed loss analysis, guidelines are eventually developed for future performance improvement of all-inorganic perovskite solar cells.

CsPbI3-Based Phase-Stable 2D Ruddlesden-Popper Perovskites for Efficient Solar Cells

Inorganic CsPbI₃ perovskite has shown great promise in highly stable perovskite solar cells due to the lack of volatile organic components. However, the inferior phase stability in ambient conditions resulted from the very small Cs⁺, limiting their practical applications. Here, CsPbI₃-based 2D Ruddlesden-Popper (RP) perovskites were developed using two thiophene-based aromatic spacers, namely, 2-thiophenemethylamine hydroiodide (ThMA) and 2-thiopheneformamidine hydroiodide (ThFA), which significantly improved the phase stability by releasing the large inner stress of black-phase CsPbI₃. The optimized ThFA-based 2D RP perovskite (n = 5, ThFA-Cs) device achieves a record efficiency of 16.00%. Importantly, the ThFA-Cs devices could maintain an average of 98% of their initial efficiencies after being stored in N₂ at room temperature for 3000 h and 92% of their initial value at 80 °C for 960 h. This work provides a new perspective for exploration of the phase-stable CsPbI₃-based perovskite with reduced dimensions for high-performance solar cells.

Highly Efficient and Stable CsPbTh3 (Th = I, Br, Cl) Perovskite Solar Cells by Combinational Passivation Strategy

The distorted lead iodide octahedra of all-inorganic perovskite based on triple halide-mixed CsPb(I_2.85 Br_0.149 Cl_0.001 ) framework have made a tremendous breakthrough in its black phase stability and photovoltaic efficiency. However, their performance still suffers from severe ion migration, trap-induced nonradiative recombination, and black phase instability due to lower tolerance factor and high total energy. Here, a combinational passivation strategy to suppress ion migration and reduce traps both on the surface and in the bulk of the CsPhTh₃ perovskite film is developed, resulting in improved power conversion efficiency (PCE) to as high as 19.37%. The involvement of guanidinium (GA) into the CsPhTh₃ perovskite bulk film and glycocyamine (GCA) passivation on the perovskite surface and grain boundary synergistically enlarge the tolerance factor and suppress the trap state density. In addition, the acetate anion as a nucleating agent significantly improves the thermodynamic stability of GA-doped CsPbTh₃ film through the slight distortion of PbI₆ octahedra. The decreased nonradiative recombination loss translates to a high fill factor of 82.1% and open-circuit voltage (V_OC ) of 1.17 V. Furthermore, bare CsPbTh₃ perovskite solar cells without any encapsulation retain 80% of its initial PCE value after being stored for one month under ambient conditions.

Ionic Liquid Treatment for Highest-Efficiency Ambient Printed Stable All-Inorganic CsPbI3 Perovskite Solar Cells

All-inorganic cesium lead triiodide (CsPbI₃ ) perovskite is well known for its unparalleled stability at high temperatures up to 500 °C and under oxidative chemical stresses. However, upscaling solar cells via ambient printing suffers from imperfect crystal quality and defects caused by uncontrollable crystallization. Here, the incorporation of a low concentration of novel ionic liquid is reported as being promising for managing defects in CsPbI₃ films, interfacial energy alignment, and device stability of solar cells fabricated via ambient blade-coating. Both theoretical simulations and experimental measurements reveal that the ionic liquid successfully regulates the perovskite thin-film growth to decrease perovskite grain boundaries, strongly coordinates with the undercoordinated Pb²⁺ to passivate iodide vacancy defects, aligns the interface to decrease the energy barrier at the electron-transporting layer, and relaxes the lattice strain to promote phase stability. Consequently, ambient printed CsPbI₃ solar cells with power conversion efficiency as high as 20.01% under 1 sun illumination (100 mW cm^-2 ) and 37.24% under indoor light illumination (1000 lux, 365 µW cm^-2 ) are achieved; both are the highest for printed all-inorganic cells for corresponding applications. Furthermore, the bare cells show an impressive long-term ambient stability with only ≈5% PCE degradation after 1000 h aging under ambient conditions.

Black Phase of Inorganic Perovskite Stabilized with Carboxyimidazolium Iodide for Stable and Efficient Inverted Perovskite Solar Cells

As all-inorganic perovskite (CsPbI_3-xBr_x) is prone to phase transition from the α phase (black phase) to the δ phase (yellow phase) in a humid environment or under heating, improving the phase stability of all-inorganic perovskite of the black phase is one of the urgent problems to solve. Herein, 1,2-dimethyl-3-acetylimidazolium iodide (DMAII) is spin-coated onto the surface of CsPbI_3-xBr_x perovskite for use in p-i-n perovskite solar cells (PSCs). We find that the DMAII coating has two effects on the CsPbI_3-xBr_x perovskite film: surface passivation and phase stabilization of perovskite. Traps in the CsPbI_3-xBr_x perovskite film can be reduced significantly by DMAII passivation, resulting in enhanced hole extraction and suppressed charge recombination. Consequently, the power conversion efficiency (PCE) is improved from 10.81 to 13.14%. Moreover, the DMAII coating can significantly inhibit the phase transition from the α phase to the δ phase in a humid environment or under heating, as characterized by the X-ray diffraction pattern, UV-vis absorption spectrum, and film color. After exposing the CsPbI_3-xBr_x perovskite films to a humid atmosphere (relative humidity = 40-60%) for 6 h, the PCE decreases dramatically to only 0.12% of the initial PCE for the PSC without the DMAII coating, while the PCE maintains 80% of the initial PCE for the PSC with the DMAII coating. In addition, when the PSC devices are heated at 120 °C for 4 h, the control PSC shows a 96% decrease in PCE, while the PCE decay is only 9% for the DMAII-coated PSC. These findings indicate that carboxyl-substituted imidazolium iodide is a kind of promising material to not only passivate traps but also stabilize the black phase of all-inorganic perovskite.

Perovskite Solar Cells from the viewpoint of innovation and sustainability

Innovation is seriously investing around the themes of climate change and sustainability. Commercial Photovoltaic (PV) has egregiously contributed to getting to 22.1% share of the gross final energy consumption in...

Efficient and Stable CsPbI3 Inorganic Perovskite Photovoltaics Enabled by Crystal Secondary Growth

Defect-triggered phase degradation is generally considered as the main issue that causes phase instability and limited device performance for CsPbI₃ inorganic perovskites. Here, a defect compensation in CsPbI₃ perovskite through crystal secondary growth of inorganic perovskites is demonstrated, and highly efficient inorganic photovoltaics are realized. This secondary growth is achieved by a solid-state reaction between a bromine salt and defective CsPbI₃ perovskite. Upon solid-state reaction, the Br^- ions can diffuse over the entire CsPbI₃ perovskite layer to heal the undercoordinated Pb²⁺ and conduct certain solid-state I/Br ion exchange reaction, while the organic cations can potentially heal the Cs⁺ cation vacancies through coupling with [PbI₆ ]^4- octahedra. The carrier dynamics confirm that this crystal secondary growth can realize defect compensation in CsPbI₃ . The as-achieved defect-compensated CsPbI₃ not only improves the charge dynamics but also enhances the photoactive phase stability. Finally, the CsPbI₃ -based solar cell delivers 20.04% efficiency with excellent operational stability. Overall, this work proposes a novel concept of defect compensation in inorganic perovskites through crystal secondary growth induced by solid-state reaction that is promising for various optoelectronic applications.

Defects in CsPbX3 Perovskite: From Understanding to Effective Manipulation for High-Performance Solar Cells

The rapid development of all inorganic metal perovskite (CsPbX₃ , X represents halogen) materials holds great promise for top-cells in tandem junctions due to their glorious thermal stability and continuous adjustable band gap in a wide range. Due to the presence of defects, the power conversion efficiency (PCE) of CsPbX₃ perovskite solar cells (PSCs) is still substantially below the Shockley-Queisser (SQ) limit. Therefore, it is imperative to have an in-depth understanding of the defects in PSCs, thus to evaluate their impact on device performances and to develop corresponding strategies to manipulate defects in PSCs for further promoting their photoelectric properties. In this review, the latest progress in defect passivation in the CsPbX₃ PSCs field is summarized. Starting from the effect of non-radiative recombination on open circuit voltage (V_oc ) losses, the defect physics, tolerance, self-healing, and the effect of defects on the photovoltaic properties are discussed. Some techniques to identify defects are compared based on quantitative and qualitative analysis. Then, passivation manipulation is discussed in detail, the defect passivation mechanisms are proposed, and the passivation agents in CsPbX₃ thin films are classified. Finally, directions for future research about defect manipulation that will push the field to progress forward are outlined.

Rational Surface-Defect Control via Designed Passivation for High-Efficiency Inorganic Perovskite Solar Cells

Iodine vacancies (V_I ) and undercoordinated Pb²⁺ on the surface of all-inorganic perovskite films are mainly responsible for nonradiative charge recombination. An environmentally benign material, histamine (HA), is used to passivate the V_I in perovskite films. A theoretical study shows that HA bonds to the V_I on the surface of the perovskite film via a Lewis base-acid interaction; an additional hydrogen bond (H-bond) strengthens such interaction owing to the favorable molecular configuration of HA. Undercoordinated Pb²⁺ and Pb clusters are passivated, leading to significantly reduced surface trap density and prolonged charge lifetime within the perovskite films. HA passivation also induces an upward shift of the energy band edge of the perovskite layer, facilitating interfacial hole transfer. The combination of the above raises the solar cell efficiency from 19.5 to 20.8 % under 100 mW cm^-2 illumination, the highest efficiency so far for inorganic metal halide perovskite solar cells (PSCs).

Research progress of full electroluminescent white light-emitting diodes based on a single emissive layer

Carbon neutrality, energy savings, and lighting costs and quality have always led to urgent demand for lighting technology innovation. White light-emitting diodes (WLEDs) based on a single emissive layer (SEL) fabricated by the solution method have been continuously researched in recent years; they are advantageous because they have a low cost and are ultrathin and flexible. Here, we reviewed the history and development of SEL-WLEDs over recent years to provide inspiration and promote their progress in lighting applications. We first introduced the emitters and analysed the advantages of these emitters in creating SEL-WLEDs and then reviewed some cases that involve the above emitters, which were formed via vacuum thermal evaporation or solution processes. Some notable developments that deserve attention are highlighted in this review due to their potential use in SEL-WLEDs, such as perovskite materials. Finally, we looked at future development trends of SEL-WLEDs and proposed potential research directions.

Highly Stable Inorganic Lead Halide Perovskite toward Efficient Photovoltaics

ConspectusOwing to the remarkable progress achieved over the past decade with research efforts from the perspectives of material synthesis, device configuration, and theoretical investigation, metal halide perovskites have emerged as a revolutionary class of light-absorbing semiconductors. The perovskite photovoltaic devices have demonstrated an impressive increase in power conversion efficiency. For single-junction perovskite solar cells, the value has risen from the initial one-digit maximum to the state-of-art record of 25.5%. Among various chemical and structural variations of perovskites, inorganic lead halides possess a more favorable operational stability and hold greater potential for perovskite/silicon tandem photovoltaics' top cells. At the initial stage of exploring all-inorganic perovskites for optoelectronic applications, many concepts, technical routes, and modification strategies were directly adopted from research on the more-developed field of organic-inorganic hybrid perovskite (OIHP). However, as understandings on inorganic perovskite deepen with research experience gained from both experimental and theoretical progression, it has been found that the difference between the asymmetric, volatile organic cations and the spherical, stable inorganic cations can lead to drastic changes on overall material properties and the subsequent device performances. In detail, the disparities reflect the crystalline and phase profiles of the material, the fabrication and passivation rationales of perovskite thin films, and the photophysics in the assembled optoelectronic devices. Therefore, the discussions of all-inorganic perovskites have their own exclusivity and are worthy of a specialized scrutinization.Here in this Account, the latest progress on the stabilization of inorganic lead halide perovskites for efficient photovoltaic applications is highlighted. A library of chemical compositions will be discussed with a focus on notable works about CsPbI₃, which possesses a more favorable bandgap as a tandem to commercialized silicon solar cells. To underscore the influence of the crystal phase on the stability of inorganic perovskites, fundamental investigations regarding the chemical and physical properties, including experimental and theoretical studies, will be summarized as a means of phase control. The stability of inorganic lead halide perovskites can also be improved by the strategic introduction of external components to the light-absorbing layer, such as the incorporation of inorganic halides, organic cations, OIHPs with low dimension, etc. These strategies can synergistically improve the stability and efficiency of the fabricated devices from the perspectives of compositional tuning, dimensional engineering, surface termination, and low-dimension capping. On the basis of a careful examination and an analysis of works achieved in these categories from our group and others, we will then discuss some promising approaches toward achieving more stable and efficient photovoltaics using inorganic lead halide perovskites.

Organic Matrix Assisted Low-temperature Crystallization of Black Phase Inorganic Perovskites

All-inorganic perovskites have attracted increasing attention for applications in perovskite solar cells (PSCs) and optoelectronics, including light-emitting devices (LEDs). Cesium lead halide perovskites with tunable I/Br ratios and a band gap aligning with the sunlight region are promising candidates for PSCs. Although impressive progress has been made to improve device efficiency from the initial 2.9 % with low phase stability to over 20 % with high stability, there are still questions regarding the perovskite crystal growth mechanism, especially at low temperatures. In this Minireview, we summarize recent developments in using an organic matrix, including the addition and use of organic ions, polymers, and solvent molecules, for the crystallization of black phase inorganic perovskites at temperatures lower than the phase transition point. We also discuss possible mechanisms for this low-temperature crystallization and their effect on the stability of black phase perovskites. We conclude with an outlook and perspective for further fabrication of large-scale inorganic perovskites for optoelectronic applications.

Hot Carrier Dynamics and Charge Trapping in Surface Passivated β-CsPbI3 Inorganic Perovskite

Thermodynamically stable CsPbI₃ inorganic perovskite has achieved high efficiency exceeding 20% with surface defect passivation, but a thorough understanding on the photophysics properties of surface passivated CsPbI₃ inorganic perovskite is still lacking. Herein, we have used transient absorption spectroscopy to investigate the photophysical properties of β-CsPbI₃ perovskites with and without passivation. The results indicate that the carrier trapping process has become slower because of the reduced deep defects that were varied to shallow defects due to surface passivation. The bimolecular recombination of β-CsPbI₃ was also accelerated because of the improved carrier mobility after healing surface defects by passivation agents. Moreover, the efficient defect passivation can also elongate the hot carrier lifetime from 0.26 to 0.37 ps by impeding the charge trapping process. Our findings reveal that the defects passivation is beneficial to enhance defect tolerance, improve carrier transport, and slow down the hot carrier cooling for developing high-performance photovoltaics.

Preparation of Low Grain Boundary Perovskite Crystals with Excellent Performance: The Inhibition of Ammonium Iodide

For the study, we prepared a low grain boundary three-dimensional CH3NH3PbI3 crystal (3D-MAPbI3) on TiO2 nanoarrays by inhibition of ammonium iodide and discussed the formation mechanism of the crystal. Based on the 3D-MAPbI3 crystal, solar cells showed modified performance with a power conversion efficiency (PCE) of up to 19.3%, which increases by 36.8% in contrast to the counterparts. We studied the internal photocurrent conversion process. The highest external quantum efficiency is up to 92%, and the electron injection efficiency is remarkably facilitated where the injection time decreases by 37.8% compared to the control group. In addition, based on 3D-MAPbI3, solar cells showed excellent air stability, which possesses 78.3% of the initial PCE, even though they were exposed to air for 30 days. Our results demonstrate a promising approach for the fabrication of perovskite solar cells with high efficiency and stability.